CK 0.8% Zirconiated White Tungsten Pack Of 10
0.8% ZIRCONIATED (WHITE) EWZr-8/WZ8 Principal Oxide: 0.7-0.9% Zirconium Oxide 0.8% Zirconiated (White). Best for use in Alternating Current (A/C) for aluminium alloys and magnesium alloys using inverter or transformer based constant current power sources. Balls well, handles higher amperage than pure tungsten with less pitting, better arc starts and arc stability than pure tungsten.
CK 1.5% Lantanated Gold Tungsten Pack Of 10
CK Worldwide 1.5% LANTHANATED (GOLD) EWLa-1.5/WU5 Principal Oxide: 1.3-1.7% Lanthanum Oxide Lanthanated: Best for use in Direct Current (D/C) as an alternative to 2% Thoriated using inverter or transformer based constant current power sources. Best for non corroding steels, titanium alloys, nickel alloys, copper alloys. Best D/C arc starts and stability, low erosion rate, wide amperage range, no splitting. In sizes: 0.5mmx175mm to 4.0x 175mm Comes in pack of 10.
CK 2 Series CK9 / 20 Short Backcap With O-Ring
CK 200S Short back cap with O ring for 2 series Tig torch such as CK 9, 20 and 230 weldcraft part number 41V33.
CK 2 Series Complete Pink Ceramic Front End Gas Saver Kit
Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 2 series (CK9, CK20) or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.
CK 2 Series Complete Pyrex Cup Front End Kit
Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 2 series (CK9, CK20) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body. Part # Description Quantity 2P8GS CK #8 Pyrex Cup - 2/3 Series Gas Saver, 12.7mm bore x 32.6mm length 1 2C040GS CK Wedge Collet - 2 Series Gas Saver, 1.0mm 1 2HSGS CK Standard Heatshield - 2 Series Gas Saver 1 2CBGS CK Standard Collet Body - 2 Series Gas Saver, One Size Fits All 1 TAS040GS CK Tungsten Adapter - 2/3 Series Gas Saver, 1.0mm 1
CK 2 Series Complete Pyrex Large Diameter Cup Gas Saver Kit
The CK Large Diameter Gas Saver front end is used to provide an inert atmosphere for the welding of reactive metals such as titanium, molybdenum, nickel-based and aluminum based alloys, as well as non-reactive metals like stainless steel. This design is lightweight, allowing for operator comfort and accurate control. The front end also uses a clear Pyrex cup creating excellent visibility of the weld puddle. The clear cup features an inside diameter of 1 1/8" (28.57mm) which is the largest cup orifice available on the market today. This design offers a replaceable, interchangeable tungsten adapter; and a universal collet body, creating less inventory, and allowing inexpensive screen replacement. Tungsten stick-out can be up to 2" (50.8mm) in certain conditions. This kit allows welders to weld low amperage Titanium without a trailing shield. Great for tack welding outside of an inert chamber and repairs of small cracks. 2 Series Fits 9 & 20 Torch Models.
CK 2 Series Gas Lens Large Diameter
Large diameter gas lens for superior gas coverage for use with all 2 series WP9 & 20 Commonly used on pipework when "walking the cup" Large diameter gas lens' ranging from 1.6mm - 3.2mm
CK 2 Series Large Diameter Gas Lens Heat Shield
Heatshield Large Diameter, 2 Series, Torch Head Accessories Fits all WP9 & 20 TIG Torches
CK 2 Series Standard Collet Body Ceramic Cup Fits WP9 & 20
CK 2 Series Standard Collet Body Ceramic Cup – Fits WP9 & WP20 The CK 2 Series Standard Collet Body Ceramic Cup is a high-quality TIG welding accessory designed for use with WP9 and WP20 torches. Manufactured to CK Worldwide’s exacting standards, this ceramic cup delivers excellent heat resistance, durability, and performance for precise, controlled TIG welding. The standard collet body design ensures smooth, consistent gas coverage and optimal arc stability, resulting in cleaner welds and reduced contamination. Built from premium-grade ceramic, it withstands high temperatures and thermal shock, making it ideal for both professional and workshop environments. Key Features: Genuine CK Worldwide component – ensures compatibility and reliability Fits WP9 and WP20 TIG torches High-quality ceramic construction – excellent heat and thermal shock resistance Provides stable gas flow – for clean, consistent welds Durable and long-lasting – ideal for regular professional use Applications: TIG welding on stainless steel, mild steel, and non-ferrous metals Fabrication and precision welding tasks Industrial, workshop, and maintenance use Sold Singularly - If Packs Are Required Please Order Quantities Of 10
CK 2 Series Standard Gas Lens Ceramic Cup
Various CK Alumina Gas Lens Cups for CK 2 Series torches ranging in size from 6mm - 13mm. Fits Standard WP9 & WP20 TIG Torches Sold Singularly - If Packs Are Required Please Order In Quantities Of 10
CK 2 Series WP9 & 20 Long Backcap With O-Ring 41V24
CK 2 Series WP9 & 20 Long Backcap With O-Ring 41V24 Also Fits All Generic WP9/20 TIG Torches Standard And Is An Upgrade For Generic Part Number 41V24 The CK 2 Series WP9 & 20 Long Backcap With O-Ring (41V24) is a high-quality replacement component designed for TIG welding torches, providing a secure seal and optimal tungsten electrode protection. Manufactured for precision and durability, this long backcap offers enhanced control and extended electrode reach, making it ideal for professional and industrial applications. Key Features: Durable, Heat-Resistant Construction – Built from high-quality materials to withstand the high temperatures and demanding conditions of TIG welding. Secure O-Ring Seal – Comes with a precision-fit O-ring, ensuring an airtight seal to prevent gas leaks and maintain welding performance. Long Backcap Design – Provides extended tungsten electrode reach, offering greater flexibility for deep, precision welds. Compatible with CK 2 Series WP9 & WP20 Torches – Specifically designed to fit CK Worldwide 9 and 20 series TIG torches, ensuring a perfect replacement. Quick & Easy Installation – Screws in effortlessly for fast replacement and minimal downtime. Ideal For: Professional welders and fabricators Aerospace, automotive, and precision welding applications Industrial TIG welding projects DIY enthusiasts needing a reliable replacement part Why Choose CK Worldwide? CK Worldwide is a trusted leader in high-quality TIG welding equipment, known for precision engineering, durability, and superior performance. The CK 2 Series WP9 & 20 Long Backcap With O-Ring (41V24) ensures secure tungsten positioning, leak-free operation, and enhanced welding efficiency.
CK 2% Ceriated Grey Tungsten Electrodes Pack Of 10
CK 2% Ceriated Grey Tungsten Electrodes Pack Of 10 EWCe-2/WC20 Principal Oxide: 1.8-2.2% Cerium Oxide NON-RADIOACTIVE. Best for use in Alternative Current (A/C) or Direct Current (D/C) applications using inverter or transformer based constant current power sources. Good for low-alloyed steels, non-corroding steels, aluminium alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Good ignition and re-ignition properties, long service life, excellent arc stability. Low erosion rate, best at low amperage range, no spitting. Good D/C arc starts and stability
CK 2% Thoriated Red Tungsten Electrode Pack Of 10
CK 2% THORIATED (RED) EWTh-2/WT20 Principal Oxide: 1.7-2.2% Thorium Oxide Best for use in Direct Current (D/C) applications using transformer based constant current power sources. Best for use on non corroding steels, titanium alloys, nickel alloys, copper alloys. Good D/C arc starts and stability, medium erosion rate, medium amperage range, medium tendency to spit.
CK 20FX Water Cooled Replacable Torch Body
Replacement torch body for CK 20FX Torches Packed Dimensions: Height 27cm x Width 8.00cm x Depth 2.50cm Gross Weight: 0.100kg each
CK 3 Series Complete Pink Ceramic Cup Gas Saver Kit
Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 3 series (CK17, CK18, CK26) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.
CK 3 Series Complete Pyrex Gas Saver Cup Front End Kit
Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 3 series (CK17, CK18, CK26) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.
CK 3 Series Gas Lens Large Diameter
Large diameter gas lens for superior gas coverage for use with all 3 series (wp17, 18 & 26) TIG Torches Commonly used on pipework when "walking the cup" Large diameter gas lens' ranging from 1.6mm - 2.4mm
CK 3 Series Long Ceramic TIG Gas Lens Cup Fits WP17,18 & 26 Torches
Various CK Long Gas Lens Cups for CK 3 Series ranging in size from 8.0mm - 11mm.
CK 3 Series Standard Alumina TIG Gas Lens Cup
Various CK Standard Gas Lens Cups for CK 3 Series ranging in size from 6.0mm - 13mm. Fits Standard WP17, 18 & 26 TIG Torches Sold Singularly - If Packs Are Required Please Order In Quantities Of 10
CK 3 Series Standard Collet Body Long Alumina Cup
Various CK Standard Collet Body Long Reach Cups for CK 3 Series ranging in size from 8mm - 9.5mm.
CK 3 Series TIG Standard Collet Body Alumina Cup WP17,18 & 26 Fitment
The CK 3 Series TIG Standard Collet Body Alumina Cup is a high-quality replacement TIG torch consumable designed for use with WP17, WP18 and WP26 series TIG torches fitted with a standard collet body setup. Manufactured from durable alumina ceramic, the cup is designed to withstand the high temperatures generated during TIG welding while directing the shielding gas around the tungsten electrode and into the weld area. Correct shielding gas coverage is essential for protecting the molten weld pool and tungsten electrode from atmospheric contamination. Replacing worn, cracked or damaged ceramic cups helps maintain reliable gas coverage and consistent TIG welding performance. The CK 3 Series fitment makes these cups suitable for the widely used WP17 air-cooled, WP18 water-cooled and WP26 air-cooled TIG torch platforms, making them an essential consumable for professional welding and fabrication workshops. Available in a range of cup sizes to suit different tungsten sizes, joint configurations, gas flow requirements and welding applications. Key Features Genuine CK Worldwide 3 Series TIG consumable Standard collet body alumina ceramic cup Compatible with WP17, WP18 and WP26 TIG torches Durable high-temperature alumina construction Directs shielding gas around the tungsten and weld pool Helps maintain consistent shielding gas coverage Suitable for standard collet body TIG torch setups Available in multiple cup sizes Quick and straightforward replacement Ideal for professional TIG welding and fabrication Useful replacement or workshop spare Torch Compatibility Suitable for compatible: WP17 TIG Torches WP18 TIG Torches WP26 TIG Torches CK Worldwide 3 Series compatible torch setups Typical Applications Ideal for: Mild steel TIG welding Stainless steel TIG welding Aluminium TIG welding Pipe and tube fabrication Automotive fabrication General engineering Maintenance and repair Precision TIG welding Specification Brand: CK WorldwideSeries: 3 SeriesProduct Type: TIG Torch Alumina CupMaterial: Alumina CeramicTorch Fitment: WP17, WP18 & WP26Configuration: Standard Collet BodyAvailable Sizes: Various Cup SizesApplication: TIG / GTAW Welding
CK 3GHSLD 3 Series Large Diameter Gas Lens Insulator
CK 3GHSLD 3 Series Large Diameter Gas Lens Insulator
CK 9 & 20 Medium Backcap With O-Ring
CK 2 Series - CK9 & 20 Medium Length Backcap Common Part Code - 41V35 The CK 9 / 20 Medium Backcap With O-Ring is a high-quality replacement component designed for TIG welding torches, ensuring a secure and reliable seal while protecting the tungsten electrode. Manufactured to precise industry standards, this backcap provides durability, heat resistance, and a tight fit for optimal performance. Key Features: Durable Construction – Made from high-quality heat-resistant materials for long-lasting performance in demanding welding applications. Secure O-Ring Seal – Includes a precision-fit O-ring to ensure an airtight seal, preventing gas leaks and enhancing torch efficiency. Medium-Length Design – Offers a balance between accessibility and control, making it suitable for a wide range of TIG welding applications. Compatible with CK 9 & CK 20 Series Torches – Designed to fit CK Worldwide 9 and 20 series TIG torches, ensuring a seamless replacement. Easy Installation – Simply screws into place for quick and hassle-free replacement, minimizing downtime. Ideal For: Professional welders and fabricators Industrial and precision TIG welding applications Automotive and aerospace welding DIY welding enthusiasts Why Choose CK Worldwide? CK Worldwide is a trusted name in premium TIG welding equipment, known for innovation, quality, and precision. The CK 9 / 20 Medium Backcap With O-Ring ensures a reliable, leak-free fit, helping you achieve consistent and high-quality welds every time.
CK 9FX Flexible Replacement Torch Body
Replacement torch body for CK 9FX / WP9 TIG Torches Gross weight: 0.400kg each
CK AK-1 Starter Kit For 2 Series Torches (CK9,CK20)
Suitable for CK 2 Series Torches: CK9, CK20, CK25, CK100, CK110, CK130, CK200, CK230, CKM200, CKM230, CKPF130, CKPF200, CWH230, CWM230, FL130, FL230. Includes the Following Parts: Part # Description Quantity 200L (41V24) Long Backup 1 2C40 (13N21) 1.0mm (.040") Collet 1 2C116 (13N22) 1.6mm (1/16") Collet 1 2CB40 (13N26) 1.0mm (.040") Collet Body 1 2CB116 (13N27) 1.6mm (1/16") Collet Body 1 2A4 (13N08) 6.4mm (1/4") #4 Alumina Cup 1 2A5 (13N09) 8.0mm (5/16") #5 Alumina Cup 1 2A6 (13N10) 9.6mm (3/8") #6 Alumina Cup 1 T0407GC2 1.0mm (.040") x 175mm (7") 2% Ceriated Tungsten 1 T1167GC2 1.6mm (1/16") x 175mm (7") 2% Ceriated Tungsten 1
CK AK-2 Starter Kit For 3 Series Torches CK17, 18, 26
Suitable for CK 3 Series Torches: CK17, CK18, CK26, CK150, CK210, CK300, CK510, CKC150, CKM210, CKM350, CWH350, CWHTL300, CWM350, FL150, FL250, TL18, TL26, TL210, TL300. Kit Contains the following: Part # Description Quantity 300S (57Y04) Short Backup 1 3C40 (10N22) 1.0mm (.040") Collet 1 3C116 (10N23) 1.6mm (1/16") Collet 1 3C332 (10N24) 2.4mm (3/32") Collet 1 3CB40 (10N30) 1.0mm (.040") Collet Body 1 3CB116 (10N31) 1.6mm (1.16") Collet Body 1 3CB332 (10N32) 2.4mm (3/32") Collet Body 1 3A4 (10N50) 6.4mm (1/4") #4 Alumina Cup 1 3A5 (10N49) 8.0mm (5/16") #5 Alumina Cup 1 3A6 (10N48) 9.6mm (3/8") #6 Alumina Cup 1 T0407GC2 1.0mm (.040") x 175mm (7") 2% Ceriated Tungsten 1 T1167GC2 1.6mm (1/16") x 175mm (7") 2% Ceriated Tungsten 1 T3327GC2 2.4mm (3/32") x 175mm (7") 2% Ceriated Tungsten 1
CK AK-3 Accessory Kit For 3 Series Torches
Suitable for CK 3 Series Torches: CK17, CK18, CK26, CK150, CK210, CK300, CK510, CKC150, CKM210, CKM350, CWH350, CWHTL300, CWM350, FL150, FL250, TL18, TL26, TL210, TL300. The Accessory Kit Contains The Following: Part # Description Quantity 300L (57Y02) Long Backup 1 300S (57Y04) Short Backup 1 3C116 (10N23) 1.6mm (1/16") Collet 1 3C332 (10N24) 2.4mm (3/32") Collet 1 3C418 (10N25) 3.2mm (1/8") Collet 1 3CB116 (10N31) 1.6mm (1/16") Collet Body 1 3CB332 (10N32) 2.4mm (3/32") Collet Body 1 3CB418 (10N28) 3.2mm (1/8") Collet Body 1 3A5 (10N49) 8.0mm (5/16") #5 Alumina Cup 1 3A6 (10N48) 9.6mm (3/8") #6 Alumina Cup 1 3A8 (10N46) 12.8mm (1/2") #8 Alumina Cup 1 T1167GC2 1.6mm (1/16") x 175mm (7") 2% Ceriated Tungsten 1 T3327GC2 2.4mm (3/32") x 175mm (7") 2% Ceriated Tungsten 1 T187GC2 3.2mm (1/8") x 175mm (7") 2% Ceriated Tungsten 1
CK AK-4 TIG Torch Accessory Kit For 2 Series Torch
CK TIG Torch Accessory Kit AK4 Suitable for CK 2 Series Torches: CK9, CK20, CK25, CK100, CK110, CK130, CK200, CK230, CKM200, CKM230, CKPF130, CKPF200, CWH230, CWM230, FL130, FL230. Also Fits Generic WP9 & 20 Torches This Kit Contains The Following: Part # Description Quantity 200L (41V24) Long Backup 1 2C116 (13N22) 1.6mm (1/16") Collet 1 2C332 (13N23) 2.4mm (3/32") Collet 1 2C418 (13N24) 3.2mm (1/8") Collet 1 2CB116 (13N27) 1.6mm (1/16") Collet Body 1 2CB332 (13N28) 2.4mm (3/32") Collet Body 1 2CB418 (13N29) 3.2mm (1/8") Collet Body 1 2A5 (13N09) 8.0mm (5/16") #5 Alumina Cup 1 2A6 (13N10) 9.6mm (3/8") #6 Alumina Cup 1 2A8 (13N12) 12.8mm (1/2") #8 Alumina Cup 1 T1167GC2 1.6mm (1/16") x 175mm (7") 2% Ceriated Tungsten 1 T3327GC2 2.4mm (3/32") x 175mm (7") 2% Ceriated Tungsten 1 T187GC2 3.2mm (1/8") x 175mm (7") 2% Ceriated Tungsten 1
CK AK-4GS Complete Gas Saver Kit For 2 Series Torches
Suitable for CK 2 Series Torches: CK9, CK20, CK25, CK100, CK110, CK130, CK200, CK230, CKM200, CKM230, CKPF130, CKPF200, CWH230, CWM230, FL130, FL230. Part # Description Quantity 200L (41V24) Long Backup 1 2C116GS 1.6mm (1/16") Collet 1 2C332GS 2.4mm (3/32") Collet 1 2C418GS 3.2mm (1/8") Collet 1 TAS116GS 1.6mm (1/16") Tungsten Adaptor 1 TAS332GS 2.4mm (3/32") Tungsten Adaptor 1 TAS418GS 3.2mm (1/8") Tungsten Adaptor 1 2CBGS-1 Collet Body 1 2HSGS-1 Heatshield 1 2A4GS 6.4mm (1/4") #4 Alumina Cup 1 2A6GS 9.6mm (3/8") #6 Alumina Cup 1 2A8GS 12.8mm (1/2") #8 Pyrex Cup 1 T1167GC2 1.6mm (1/16") x 175mm (7") 2% Ceriated Tungsten 1 T3327GC2 2.4mm (3/32") x 175mm (7") 2% Ceriated Tungsten 1 T187GC2 3.2mm (1/8") x 175mm (7") 2% Ceriated Tungsten 1
CK Blue 2% Lanthanated Tungsten Electrode Pack Of 10
CK Blue 2% LANTHANATED (BLUE) EWLa-2/WL20 Principal Oxide: 1.8-2.2% Lanthanum Oxide NON-RADIOACTIVE. Best general-purpose electrode for both Alternating Current (A/C) or Direct Current (D/C) using inverter or transformer based constant current power sources. Good for low-alloyed steels, non-corroding steels, aluminium alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Good arc starts and stability, medium to high amperage range, low erosion rate.
CK Complete Gas Saver Kit For 3 Series Torches
Suitable for CK 3 Series Torches: CK17, CK18, CK26, CK150, CK210, CK300, CK510, CKC150, CKM210, CKM350, CWH350, CWHTL300, CWM350, FL150, FL250, TL18, TL26, TL210, TL300. The Kit Contains The Following: Part # Description Quantity 300S (57Y04) Short Backup 1 3C116GS 1.6mm (1/16") Collet 1 3C332GS 2.4mm (3/32") Collet 1 3C418GS 3.2mm (1/8") Collet 1 TAS116GS 1.6mm (1/16") Tungsten Adaptor 1 TAS332GS 2.4mm (3/32") Tungsten Adaptor 1 TAS418GS 3.2mm (1/8") Tungsten Adaptor 1 3CBGS Collet Body 1 3HSGS Heatshield 1 3A5GS 8.0mm (5/16") #5 Alumina Cup 1 3A6GS 9.6mm (3/8") #6 Alumina Cup 1 3A8GS 12.8mm (1/2") #8 Pyrex Cup 1 T1167GC2 1.6mm (1/16") x 175mm (7") 2% Ceriated Tungsten 1 T3327GC2 2.4mm (3/32") x 175mm (7") 2% Ceriated Tungsten 1 T187GC2 3.2mm (1/8") x 175mm (7") 2% Ceriated Tungsten 1
CK Flexloc FL130 TIG Torch With Swivel Head & Superflex Cable
The Flex-Loc™ series torch is a variable angle torch that locks into any position within a 360 degree rotation. Interchangeable heads allow different size tungsten and head sizes to be quickly and efficiently changed. The patented Flex-Loc™ TIG Torch is available in water cooled and gas cooled models. Great for applications requiring a unique angle yet allowing the user a rigid torch. Ergonomically designed to help eliminate fatigue.Applications: Cup walking on pipe root welds, welds that require a mirror to access weldment, welds requiring different tungsten sizes ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch
CK Flexloc FL150 TIG Torch With Swivel Head & Superflex Cable
The Flex-Loc™ series torch is a variable angle torch that locks into any position within a 360 degree rotation. Interchangeable heads allow different size tungsten and head sizes to be quickly and efficiently changed. The patented Flex-Loc™ TIG Torch is available in water cooled and gas cooled models. Great for applications requiring a unique angle yet allowing the user a rigid torch. Ergonomically designed to help eliminate fatigue.Applications: Cup walking on pipe root welds, welds that require a mirror to access weldment, welds requiring different tungsten sizes. Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch
CK Flexloc FL230 2 Series Water Cooled TIG Torch
The Flex-Loc™ series torch is a variable angle torch that locks into any position within a 360 degree rotation. Interchangeable heads allow different size tungsten and head sizes to be quickly and efficiently changed. The patented Flex-Loc™ TIG Torch is available in water cooled and gas cooled models. Great for applications requiring a unique angle yet allowing the user a rigid torch. Ergonomically designed to help eliminate fatigue.Applications: Cup walking on pipe root welds, welds that require a mirror to access weldment, welds requiring different tungsten sizes. 360 degree variable angle torch head Locks in any position Interchangeable head allows different configurations and head sizes Great for “walking the cup” on open root welds for pipe cutting Access hard to reach welds ergonomically Helps prevent carpal tunnel syndrome Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications CK Colour Coded Superflex Cable 3/8" gas fittings Colour coded leads for quick identification Black argon hose Blue water hose Red power cable
CK Gas Lens 2 Series For CK9 & CK20 (WP9 & WP20)
CK 2 Series Standard Gas Lens CK9 (WP9) These gas lenses are for improving the gas coverage over standard collet bodies, these are ideal for allowing a longer tungsten to stick out, these fit all standard WP9 and WP20 torches. These gas lenses range in size from 0.5mm up to 3.2mm. These are used in conjunction with gas cups such as ceramic or glass cups. The glass lenses allow you to attach a wider range of cups to your welding arsenal. If you regularly weld stainless steel or titanium materials which require a wider spread of gas coverage, gas lenses are ideal as they provide a consistent non-turbulent gas flow. Please note- if you require packs please order in quantities of 10. Why are gas lenses better than standard collet bodies? Collet bodies are standard consumables used when TIG welding, the purpose of these parts are to hold electrodes in place and also allow the gas shield to surround the weld pool. The plume of gas over the weld pool comes through the special holes at the end of the collet body, the gas is filtered out but it does not have any specific direction just out of the torch- the shape of the cup aims the gas over the weld pool but it can result in uneven pockets in the gas as it is pushed from the torch. A gas lens can be used as a replacement to the collet body (not the collet though), it also holds the collet in place and evenly distributes the gas over the weld area. Gas lenses have a mesh screen used as a diffuser which distributes the gas in a laminar pattern over the weld area which allows for less turbulence and a better overall weld. A gas lens allows for increased gas coverage and means the tungsten can stick out further. A further benefit of using a gas lens is that we can save gas usage because it is more efficient and more effective. For example a regular collet body with a number 8 cup will use around 10 litres of gas per minute flow rate whereas the gas lens with the same number 8 cup would have a flow rate of roughly 5 litres per minute. This makes it a more efficient and cheaper method of gas shielding. You may also weld at different angles as the flow is better, wider and more consistent. The inner mesh of the lens is also replaceable in case of contamination.
CK Green LAaYZR (Chartreuse) Tungsten Electrodes Pack of 10
LaYZr (CHARTREUSE) EWG Principal Oxides: 1.5% Lanthanum, 0.08% Zirconium, 0.08% Yttrium Oxides This non-radioactive tungsten is best for automated or robotic uses in AC or DC, it can tolerate a low voltage and uses inverter or transformer based constant current power sources. These tungsten's are good for low alloyed steels, non-corroding steels and alloys of aluminium, magnesium, titanium, nickel and copper. The geometry of the tips are very stable and they run cooler than the 2% Thoriated and have a longer lifespan. Use these in the low to medium amp range. This pack of ten is the best way always to have tungsten's on hand.
CK Heatshield for CK3 Series torches is now available through Tec Products.
Standard and Large sized CK Heatshield insulators for 2 Series(WP9/20) torches.
CK Series 3 Backcap Long 57Y02 Fits WP17,18 & 26 Torches
CK Series 3 Back Cap Long 57Y02 – Fits WP17, WP18 & WP26 Torches The CK Series 3 Long Back Cap (57Y02) is a genuine CK Worldwide replacement part designed for use with WP17, WP18, and WP26 TIG torch series. This long back cap securely holds the tungsten electrode in place, maintaining proper alignment and electrical contact during welding. Manufactured from high-quality, heat-resistant materials, it ensures long service life even under demanding conditions. The long design allows for the use of extended tungsten electrodes, providing greater reach and visibility for precision welding applications. Key Features: Genuine CK Worldwide TIG torch component Long back cap (57Y02) – for use with extended tungsten electrodes Ensures secure electrode hold and stable arc performance Heat-resistant construction for long life and durability Compatible with WP17, WP18 & WP26 TIG torches Interchangeable with standard 3 Series TIG torch consumables Typical Applications: TIG Welding | Stainless Steel | Aluminium | Mild Steel | Fabrication | Maintenance Brand: CK Worldwide Part Number: 57Y02 Series: 3 Series Fits: WP17, WP18, WP26 Torches
CK Series 3 Backcap Medium (with O-Ring)
The CK Series 3 Backcap Medium (with O-Ring) is now available for CK Series 3 torches. Fits All CK / WP 17,18 & 26 Torches
CK Series 3 Backcap Short 57Y04 Fits WP17,18 & 26 Torches
CK Series 3 Short Back Cap 57Y04 – Fits WP17, WP18 & WP26 TIG Torches The CK Series 3 Short Back Cap (57Y04) is a genuine replacement back cap designed for use with WP17, WP18 and WP26 style TIG welding torches. Its compact design provides improved access when welding in confined spaces, making it ideal for pipework, tube fabrication, motorsport, and precision engineering applications where a standard or long back cap may restrict torch movement. Manufactured to the highest standards, the 57Y04 short back cap securely retains the tungsten electrode while maintaining an effective gas seal, ensuring consistent shielding gas coverage and reliable TIG welding performance. It is fully compatible with CK Worldwide Series 3 torches and industry-standard WP17, WP18 and WP26 torches from many leading manufacturers. Ideal as a replacement for worn or damaged components, this genuine CK Worldwide consumable helps keep your TIG torch operating at peak performance while improving manoeuvrability in restricted welding positions. Key Features: Genuine CK Worldwide replacement back cap CK Part Number: 57Y04 (300S) Compact short design for improved access in confined spaces Fits WP17, WP18 and WP26 style TIG welding torches Securely retains the tungsten electrode Maintains an effective gas seal for consistent shielding gas coverage Durable construction for long service life Quick and easy to install Ideal for fabrication, pipe welding, maintenance and general engineering Specifications: Product Type: TIG Torch Short Back Cap Manufacturer: CK Worldwide Part Number: 57Y04 (300S) Torch Series: Series 3 Compatibility: WP17, WP18 & WP26 TIG Torches Length: Approx. 24mm Application: TIG Welding Genuine CK Worldwide replacement part
CK Solid Wedge Collet Fits CK 2 Series WP9 & 20 Torches
CK Standard Collet for CK2 Series These come in sizes from 1.0mm to 3.2mm, these collets fit all standard WP9 and 20 TIG torches. These solid collet designs are superior to the old standard split collets which can twist and warp if overtightened. The wedge design allows for the tungsten to be put in direct contact with the collet body. This will improve the current transfer point which means a better arc starting point, stability and less resistance heating while having less low current arc wandering. These are sold singularly- if you require a pack then please order in quantities of 5.
CK Standard 3 Series TIG Standard Collet Body Fits WP17,18 & 20 Torches
CK Standard 3 Series TIG Collet Body – Fits WP17, WP18 & WP26 The CK Standard 3 Series TIG Collet Body is a precision-engineered component designed to deliver reliable performance and optimal gas flow in TIG welding applications. Manufactured from high-quality copper alloy, it ensures excellent conductivity and heat dissipation for stable arc performance and extended consumable life. Compatible with WP17, WP18, and WP26 torch series, this standard collet body works with matching CK 3 Series collets and cups to provide a secure, consistent electrode setup. Ideal for professional TIG welders seeking dependable, high-performance consumables. Key Features: Genuine CK Worldwide replacement part Precision-machined copper alloy for maximum conductivity and durability Ensures stable gas flow and superior arc control Compatible with WP17, WP18 & WP26 TIG torches Works with all CK 3 Series collets and alumina cups Built for professional TIG welding applications Typical Applications: TIG Welding | Stainless Steel | Mild Steel | Aluminium | Exotic Alloys Brand: CK Worldwide Series: 3 Series Fits: WP17, WP18, WP26 Torches Sold Singularly - If Packs Are Required Please Order In Quantities Of 5
CK Standard Collet Body CK 2 Series Fits WP9/20 Torches
Various CK Standard Collet Body for CK 2 Series ranging in size from 0.5mm - 3.2mm. Fits All Standard WP9 & 20 TIG Torches Aswell As CK Branded Ones Sold Singularly - If Packs Are Required Please Order In Quantities Of 5
CK Standard Split Collet 3 Series Fits WP17, 18 & 26
CK Standard Split Collet 3 Series – Fits WP17, WP18 & WP26 The CK Standard Split Collet 3 Series is engineered for precision, durability, and optimal performance in TIG welding applications. Manufactured by CK Worldwide, these high-quality collets are designed to provide a secure grip on the tungsten electrode, ensuring stable arc performance and excellent current transfer. Compatible with WP17, WP18, and WP26 torch series, the split design allows for easy installation and consistent clamping pressure, reducing heat build-up and extending both collet and torch life. Ideal for professional TIG welders demanding reliability and consistency across a wide range of materials and applications. Key Features: Genuine CK Worldwide replacement part Standard split design for consistent electrode grip and easy fitment Provides excellent current transfer and arc stability Precision-machined copper alloy for superior conductivity and durability Compatible with WP17, WP18, and WP26 TIG torches Available in all common tungsten diameters Typical Applications: TIG Welding | Stainless Steel | Mild Steel | Aluminium | Exotic Alloys Brand: CK Worldwide Series: 3 Series Fits: WP17, WP18, WP26 Torches Available in the following sizes: 0.5MM 1.0MM 1.6MM 2.4MM 3.2MM 4.0MM Sold Singularly - If Packs Are Required Please Order In Quantities Of 5
CK Standard Split Collet CK 2 Series - Fits WP9 & 20 Torches
CK Standard Split Collet 2 Series – Fits WP9 & WP20 Torches The CK Standard Split Collet 2 Series is a high-quality, precision-engineered TIG consumable from CK Worldwide, designed to provide a secure grip and consistent electrical contact with the tungsten electrode. Its split design ensures even clamping pressure and reliable current transfer, resulting in a stable arc and improved weld quality. Manufactured from premium copper alloy for excellent conductivity and durability, this collet is compatible with all WP9 and WP20 torch series, as well as equivalent 2 Series TIG torches. Ideal for professional TIG welders requiring dependable performance and long service life. Key Features: Genuine CK Worldwide replacement collet Standard split design for secure tungsten clamping Ensures consistent current transfer and arc stability Precision-machined copper alloy for durability and conductivity Compatible with WP9 & WP20 TIG torches Works with all CK 2 Series collet bodies and cups Typical Applications: TIG Welding | Stainless Steel | Mild Steel | Aluminium | Titanium | Precision Fabrication Brand: CK Worldwide Series: 2 Series Fits: WP9, WP20 Torches Fits All Standard WP9 & 20 TIG Torches Aswell As CK Branded Ones 0.5MM - 13N20 1.0MM - 13N21 1.6MM - 13N22 2.4MM - 13N23 3.2MM - 13N24 Sold Singularly - If Pack Sizes Are Wanted Please Order In Quantities Of 5
CK TIG Torch Gas Lens Body Standard 3 Series CK17,18 & 26
CK Standard 3 Series TIG Torch Gas Lens Body – Fits CK17, CK18 & CK26 The CK Standard 3 Series TIG Torch Gas Lens Body delivers superior shielding gas coverage and improved weld quality in all TIG applications. Precision-engineered by CK Worldwide, this gas lens body replaces the standard collet body to provide a more laminar gas flow, reducing turbulence and improving protection of the weld pool. Constructed from high-conductivity copper alloy, it ensures excellent current transfer and heat dissipation, helping extend tungsten and consumable life. Compatible with CK17, CK18, and CK26 torch series, this gas lens body is ideal for precision welding on stainless steel, aluminium, and other sensitive materials. Key Features: Genuine CK Worldwide replacement part Provides improved shielding gas coverage for cleaner welds High-quality copper alloy for superior conductivity and durability Enhances tungsten and consumable life Compatible with CK17, CK18 & CK26 TIG torches Works with all CK 3 Series gas lens collets and cups Typical Applications: TIG Welding | Stainless Steel | Aluminium | Titanium | Precision Fabrication Brand: CK Worldwide Series: 3 Series Fits: CK17, CK18, CK26 Torches Sold Singularly - If packs Are Required Please Order In Quantities Of 10
CK TIG Torch Switch With Velcro Attachment And Cable 4Mtr & 8Mtr
CK Torch Switch Add-On: CK TIG Torch Switch With Velcro Attachment And Cable 4Mtr & 8Mtr CK Momentary Flat Button Torch Switch With Velcro Strap For Use With All Size CK Torch Handles Comes With 3.9Mtr and 7.8Mtr Cable With No Plug So Your Specific Machine Plug Can Be Added Velcro Strap Fastening Stops The Uncomfortable Edges Of Other Conventional Switch Button Housings
CK TL 26 Flex Torch Body 200 amp
Replacement TL26FX Flexi Torch Body
CK TL26 Red Superflex Power Cable 3/8" Connection
CK TL26 Red Superflex Power Cable – 3/8" Connection The CK TL26 Red Superflex Power Cable is a high-performance, flexible welding cable designed to deliver maximum power transfer and durability in demanding welding environments. Featuring a 3/8" connection, this cable provides a secure and reliable fit for a wide range of welding machines and torches. Constructed with high-grade copper conductors, the Superflex cable offers exceptional conductivity while maintaining superior flexibility — even in cold or confined working conditions. The durable red rubber insulation provides excellent resistance to heat, oil, abrasion, and mechanical wear, ensuring long service life and consistent performance. Ideal for professional welders, fabrication shops, and industrial settings, the CK TL26 Superflex Power Cable combines strength, flexibility, and reliability for optimum welding efficiency. Key Features: High-performance Superflex cable – provides maximum flexibility and power transfer 3/8" secure connection – compatible with a wide range of welding torches and machines High-quality copper conductors – ensure excellent electrical conductivity Durable red rubber insulation – resistant to heat, oil, and abrasion Professional-grade build – designed for heavy-duty industrial and workshop use
CK TL26 Rigid Torch Body 200 amp
Replacement CK TL26 Rigid TIG Torch Body Air Cooled Torch Head 200A Rated Takes CK 3 Series (wp17,18,26) Universal Parts
CK Trimline TL26 3 Series TIG Torch With Superflex Cable
CK Trimline TL26 TIG Torch With Superflex Cable The CK Trim-Line™ TL26 Tig torch offers the same current ratings as the standard 26 models they replace while providing a smaller, lighter design for greater comfort and ease of use. Engineered for high amperage, air-cooled applications Trim-Line™ series TIG torches take advantage of a stream-lined torch body and handle design for a more comfortable fit in you hand, allowing you to do more welding per hour with less stress and strain. The gas cooled TL26 is rated for 200A at 100% duty cycle on AC. Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch
CK Trimline TL300 350A Watercooled TIG Torch With Superflex Cables
Water cooled 350amp ACHF or DCSP at 100% Duty Cycle Takes 3 Series Head Consumables Trim-Line Water cooled torches significantly reduce the size and weight of your torch while maintaining similar amperage capacity Engineered for high amperage, water-cooled applications Trim-Line™ series TIG torches take advantage of a stream-lined torch body and handle design for a more comfortable fit in you hand, allowing you to do more welding per hour with less stress and strain. Trim-Line™ torches can be configured for nearly any job, The CK-TL300 Series are compatible with all 17, 18, 26, CS300, & CS310 Parts. ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch
Replacement CK17 Rigid Head Torch Body Gas Cooled 150A Rated
CK17 TIG Torch With Superflex Cable
Introducing the CK17 Gas-Cooled 150amp TIG Torch: Your Ultimate Welding Companion The CK17 Gas-Cooled TIG Torch is a top-tier welding tool designed to meet your welding needs with precision and efficiency. Whether you're working with ACHF or DCSP at 100%, this torch delivers outstanding performance and versatility. Plus, it seamlessly accommodates all 3 Series torch head accessories (WP17, WP18, WP26), making it a must-have for any professional welder. Why choose the CK17 TIG Torch? Worldwide Popularity: Renowned as the most favoured TIG torch globally, the CK17 is trusted by welders everywhere. Enhanced Heat Dissipation: The torch head is engineered with added mass, ensuring superior heat dissipation. This design enables you to work longer without overheating. Durable Brass Alloy Head: Crafted from a rugged brass alloy, the torch head minimises thread damage and resists galling and seizing compared to copper heads. Maximum Cooling: The torch features the largest metal head insert, guaranteeing maximum cooling and prolonging its lifespan. Heavy-Duty Construction: Built for endurance, this torch allows for extended welding sessions at 150 amps, making it perfect for demanding projects. Experience Unparalleled Flexibility with CK's Superflex Cable: The CK17 TIG Torch comes fitted with CK's Superflex Cable, offering unparalleled benefits: Lightweight and Flexible: It boasts the lightest and most flexible cable assemblies available in the market. Say goodbye to cumbersome cables and enjoy increased manoeuvrability. Versatile Compatibility: Designed to fit both gas-cooled and water-cooled torches, this cable is a versatile solution for your welding setup. Durable Construction: The cable features a lightweight silicon rubber hose with nylon over braid protection, ensuring resistance to abrasion and longevity. Improved Range of Motion: Replacing heavy, stiff cables, the Superflex Cable lets you work comfortably and with precision, even in intricate welding applications. Cold Weather Resilience: No matter the temperature, this cable remains flexible, ensuring reliable performance even in the coldest environments. Available in two length options, 4 meters (12 feet) and 8 meters (25 feet), both configurations come standard with a universal 3/8" connection for hassle-free setup. Elevate your welding experience with the CK17 Gas-Cooled TIG Torch and Superflex Cable – the perfect combination for achieving exceptional welding results. ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch Please note: There is no warranty on TIG welding torches unless there is a manufacturing defect.
CK17FX Flexible Replacement Torch Body - 150A
Replacement Flexible torch body for CK 17FX Torch 150A Rated Gross Weight: 0.350kg each
CK18 350A Watercooled TIG Torch With Superflex Cables
CK18 Water Cooled 350amp ACHF or DCSP @ 100% 3 Series Head Accessories Largest water jacket available: 300% more cooling Largest metal mass insert More mass in the head of the torch equals more efficient heat dissipation Constructed with a hardened brass alloy head to reduce thread damage Fail-safe hose connections eliminates wire ties for a positive seal Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch
CK18RG Replacement Rigid Watercooled Torch Body
Replacement Torch Body For CK18/WP18 Watercooled Torches
CK20 (250A) 2 Series Watercooled TIG Torch With Superflex Cables
2 Series CK20 Water Cooled 250amp Rated TIG Torch Most popular water-cooled torch Largest water jacket available: 300% more cooling Largest metal mass insert More mass in the head of the torch equals more efficient heat dissipation Constructed with a hardened brass alloy head to reduce thread damage Fail-safe hose connections eliminates wire ties for a positive seal Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications CK Colour Coded Superflex Cable 3/8" gas fittings Colour coded leads for quick identification Black argon hose Blue water hose Red power cable ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch
CK20RG CK20 Rigid Replacement TIG Torch Body
CK225PCSF Red Superflex Power Cable With 3/8" Connection
CK212PCSF Red Superflex Power Cable With 3/8" Connection For FL230
CK230 Flexi Head TIG Torch Body 300A Watercooled
CK230 Flexi Head TIG Torch Body – 300A Water-Cooled The CK230 Flexi Head TIG Torch Body is a premium 300 amp, water-cooled TIG torch designed to deliver maximum performance and comfort in demanding welding applications. Part of CK Worldwide’s industry-leading TIG range, the CK230 combines high amperage capability with a flexible head design, giving welders exceptional control and access in tight or awkward spaces. Its flex-head allows the torch to be adjusted to the ideal angle for every joint, reducing operator fatigue and improving weld precision. The water-cooled design provides excellent heat dissipation, enabling continuous high-amperage welding without overheating or premature wear of consumables. Key Features: 300 A rating (DC) – reliable high-current performance for stainless steel, aluminium, and exotic alloys. Water-cooled construction – maintains lower operating temperatures for extended duty cycles and longer consumable life. Flexi head design – easily bends to reach difficult angles and confined weld areas. Lightweight and ergonomic – reduces operator fatigue during long weld runs. Compatible with a wide range of CK Worldwide accessories and consumables. Industry-standard connections for easy integration with most TIG welding setups. Ideal for professional fabricators, stainless specialists, and precision welding applications, the CK230 Flexi Head 300A Water-Cooled TIG Torch Body offers superior manoeuvrability, cooling efficiency, and weld quality.
CK230 Red Superflex Power Cable With 3/8" Connection
CK230 Torch Replacement Red Superflex Power Cable With 3/8" Connection
CK230 Rigid & Flexi Head- 300A Watercooled TIG Torch Package
CK230 Water Cooled 300amp ACHF or DCSP @ 100%, 20.9cm (8-1/4 in) 2 Series (WP9/20) Head Accessories Heavy Duty 300amp 100% duty cycle torch Uses Series 2 consumables (WP9/20) Larger water jacket design runs cooler Fully achieve 3.2mm tungsten electrode capability on thick aluminium joints Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications CK Colour Coded Superflex Cable 3/8" gas fittings Colour coded leads for quick identification Black argon hose Blue water hose Red power cable ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch
Replacement Watercooled CK230 Rigid Torch Body 300A Rated
CK300 3 Series Flexi Head Watercooled Tig Torch 350A
CK300 3 Series Flexi Head Watercooled Tig Torch 350A Most popular water-cooled torch Largest water jacket available: 300% more cooling Largest metal mass insert More mass in the head of the torch equals more efficient heat dissipation Constructed with a hardened brass alloy head to reduce thread damage Fail-safe hose connections eliminates wire ties for a positive seal Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications CK Colour Coded Superflex Cable 3/8" gas fittings Colour coded leads for quick identification Black argon hose Blue water hose Red power cable
CK510 500Amp Watercooled TIG Torch With Superflex Cables
CK510 Water Cooled 500amp ACHF or DCSP @ 100%, 23.5cm (9-1/4 in), 191gm. 3 Series or 51 Series Head Accessories Applications: High amperage welds, heavy aluminium, heavy copper, job shops requiring a versatile torch using 0.5mm to 6.4mm tungsten. Smallest 500amp water-cooled torch at 100% duty cycle Most versatile water-cooled torch available Large water jacket cools torch more efficiently Cooler running torch allows longer life of electrodes Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications CK Colour Coded Superflex Cable 3/8" gas fittings Colour coded leads for quick identification Black argon cable Blue water cable Red power cable ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch
CK9 / 17 Power Cable Red Superflex Hose
CK9 & CK17 Torch Replacement Power Cable With Red Superflex Hose
CK9 Rigid Head 2 Series TIG Torch 125Amp With Superflex Cable
CK 9 Gas Cooled 125amp ACHF or DCSP @ 100% 19.0cm (7-1/2 in), 78gm, 2 Series Head Accessories Light weight, light duty torch Constructed with a hardened brass alloy head to reduce thread damage Silicon rubber insulation provides best protection against high frequency leakage Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch
CK9 Rigid Replacement Torch Head
Replacement Rigid CK9 Torch Body For CK & Generic Gas Cooled Torches
CK9FX TIG Torch Set With Flexi Head & Superflex Cable Gas-Cooled 125A Rated
CK 9 Flex Head, Gas Cooled 125amp TIG Torch With Superflex Cable Light weight, light duty torch Constructed with a hardened brass alloy head to reduce thread damage Silicon rubber insulation provides best protection against high frequency leakage Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch
Fronius Gas Through Fitting Watercooled Safe-Loc CK Torch Adaptor
Fronius Gas Through Water-Cooled Safe-Loc CK Torch Adaptor The Fronius Gas Through Water-Cooled Safe-Loc CK Torch Adaptor is a precision-engineered interface that allows you to connect water-cooled TIG torches with Safe-Loc fittings to Fronius welding machines. Designed to ensure reliable delivery of both power and shielding gas while maintaining efficient water cooling, this adaptor is ideal for professional TIG welding setups where durability and performance matter. Key Features & Benefits Secure Safe-Loc connection compatible with Fronius twist-lock style power receptacles. Gas-through design ensures consistent shielding gas flow directly to the torch. Water-cooled capability helps maintain lower operating temperatures for prolonged welding performance. Rugged construction suited for workshop or industrial TIG applications. Compatibility Connects water-cooled TIG torches (with Safe-Loc fittings) to Fronius TIG welding power sources using a 35 mm twist-lock connection. Typically used with high-performance TIG torch systems where water cooling and gas-through capability are required. Application Perfect for professionals seeking a dependable adaptor that maintains efficient cooling and gas delivery between Fronius machines and compatible water-cooled TIG torch assemblies
WP20 Rigid Head Water Cooled Replacement TIG Torch Body
WP20 Rigid Head Water-Cooled Replacement TIG Torch Body The Starparts WP20 Rigid Head TIG Torch Body is a premium water-cooled TIG solution designed for precision welding at higher amperages. Featuring a rigid head, this torch body gives welders exceptional control and comfort when working in tight spaces or on intricate joints. Its robust construction and efficient water-cooling system make it ideal for demanding, long-duration welding applications. Key Features Water-Cooled Design – Keeps the torch cooler for extended use at higher amperages, reducing operator fatigue. Compact & Lightweight – Provides excellent maneuverability without compromising durability. WP20 Series Compatible – Direct replacement for standard WP20 TIG torch setups. Professional Quality – Manufactured by Starparts, ensuring reliability and long service life. Applications Stainless steel TIG welding High-duty cycle applications Pipework and tube welding Aerospace, fabrication, and heavy-duty production welding What’s Included 1 × WP20 Rigid Head Water-Cooled TIG Torch Body (handle, consumables, and accessories sold separately) Why Choose the WP20? Designed for welders who demand high performance and flexibility, the WP20 delivers control and dependable cooling. Whether you’re working on stainless steel, thin sheet, or heavy-duty projects, this torch body is engineered to perform.
WP20FX Flexi Head Water Cooled Replacement TIG Torch Body
WP20FX Flexi Head Water-Cooled Replacement TIG Torch Body The Starparts WP20FX Flexi Head TIG Torch Body is a premium water-cooled TIG solution designed for precision welding at higher amperages. Featuring a flexible head, this torch body gives welders exceptional control and comfort when working in tight spaces or on intricate joints. Its robust construction and efficient water-cooling system make it ideal for demanding, long-duration welding applications. Key Features Flexible Head – Adjusts effortlessly for improved torch positioning in confined or awkward areas. Water-Cooled Design – Keeps the torch cooler for extended use at higher amperages, reducing operator fatigue. Compact & Lightweight – Provides excellent maneuverability without compromising durability. WP20 Series Compatible – Direct replacement for standard WP20 TIG torch setups. Professional Quality – Manufactured by Starparts, ensuring reliability and long service life. Applications Stainless steel TIG welding High-duty cycle applications Pipework and tube welding Aerospace, fabrication, and heavy-duty production welding What’s Included 1 × WP20FX Flexi Head Water-Cooled TIG Torch Body (handle, consumables, and accessories sold separately) Why Choose the WP20FX? Designed for welders who demand high performance and flexibility, the WP20FX delivers precise control and dependable cooling. Whether you’re working on stainless steel, thin sheet, or heavy-duty projects, this torch body is engineered to perform.