Shindaiwa ECO 200 Diesel Generator Welder On Wheelbarrow Chassis

The Shindaiwa ECO 200 Diesel Generator Welder on Wheelbarrow Chassis is a professional 200A engine-driven MMA welding machine and 110V generator, designed for demanding on-site welding, construction, fabrication and industrial maintenance applications. Powered by a reliable Kubota Z482-B water-cooled diesel engine, the ECO 200 combines dependable DC welding performance with an integrated auxiliary power supply, making it an excellent solution for welders working in remote locations or on sites without a mains electricity supply. Delivering an adjustable 50–200A DC welding output, the Shindaiwa ECO 200 is suitable for MMA (Stick) welding using electrodes from 2.0mm to 5.0mm, including compatible cellulosic electrodes. In addition to its welding capabilities, the ECO 200 features a 110V centre-tapped earth (CTE) auxiliary generator, providing 3.0kVA continuous power at 50Hz. This allows operators to power suitable 110V site tools, including angle grinders and other equipment, while welding. The integrated fuel-saving automatic idling system helps reduce unnecessary fuel consumption during periods of inactivity, while RCD protection provides an additional electrical safety feature. Supplied on a wheelbarrow-style chassis, the machine is designed to offer improved manoeuvrability around construction sites, fabrication yards and industrial environments. Combining robust construction, dependable welding performance and practical site portability, the Shindaiwa ECO 200 Diesel Welder Generator is an excellent choice for professional welders, contractors and engineering companies requiring reliable mobile welding and auxiliary power. Key Features Genuine Shindaiwa ECO 200/UK diesel welder generator 200A maximum DC welding output Adjustable welding current from 50–200A Suitable for MMA / Stick welding Compatible with 2.0mm to 5.0mm welding electrodes Suitable for compatible cellulosic welding electrodes Reliable Kubota Z482-B water-cooled diesel engine 110V CTE auxiliary power supply 3.0kVA continuous generator output at 50Hz Simultaneous welding and auxiliary power operation Fuel-saving automatic idling system RCD electrical protection 15-litre diesel fuel tank Up to approximately 12 hours of operation, depending on load and conditions Wheelbarrow chassis for improved site mobility Ideal for demanding construction and industrial applications Typical Applications Ideal for: On-site MMA / Stick welding Construction and structural steelwork Mobile welding and fabrication Plant and machinery maintenance Agricultural equipment repairs Industrial engineering Pipework fabrication and repairs Remote welding locations Site maintenance and shutdown work Powering compatible 110V site tools General repair and fabrication work Technical Specification SpecificationDetails Brand Shindaiwa Model ECO 200/UK Product Type Diesel Welder Generator Welding Process MMA / Stick Welding Output 50–200A DC Electrode Capacity 2.0–5.0mm Auxiliary Voltage 110V CTE Auxiliary Output 3.0kVA at 50Hz / 3.3kVA at 60Hz Generator Phase Single Phase Engine Kubota Z482-B Engine Cooling Water-Cooled Fuel Type Diesel Fuel Tank Capacity 15 Litres Approximate Running Time Up to 12 Hours Automatic Idling Yes Electrical Protection RCD Breakers Chassis Wheelbarrow Length 1080mm Width 670mm Height 860mm Approximate Dry Weight 249kg Sound Power Level 94 dB LWA  

Binzel MB501D EVO Pro Watercooled 500A Rated MIG Torch

Binzel MB EVO PRO 501D Water-Cooled MIG Welding Torch – 500A Rated The Binzel MB EVO PRO 501D Water-Cooled MIG Welding Torch is built for the most demanding industrial welding applications, delivering exceptional performance, durability, and operator comfort. Designed for high-current MIG/MAG welding, the MB EVO PRO 501D combines advanced cooling technology with Binzel's latest ergonomic handle design to provide maximum productivity during prolonged welding operations. Featuring a 100% duty cycle, the MB EVO PRO 501D is rated at 500A with mixed gas (M21) and 550A with CO₂, making it the ideal choice for heavy fabrication, structural steelwork, shipbuilding, pressure vessel manufacture, and automated production environments. The optimised liquid cooling system efficiently dissipates heat, extending consumable life while maintaining consistent welding performance even under continuous high-load conditions. The genuine Binzel two-component ergonomic handle, flexible cable assembly, and ball-joint connection provide outstanding control and reduce operator fatigue, while the robust central connector and simplified internal design make servicing and maintenance quick and straightforward. Compatible with genuine MB501D consumables, the torch delivers reliable, long-lasting performance trusted by professional welders worldwide. Key Features: Genuine Binzel MB EVO PRO 501D water-cooled MIG welding torch Heavy-duty 500A rating for demanding industrial applications Advanced liquid cooling system for maximum consumable life 100% duty cycle for continuous production welding Ergonomic two-component handle for superior comfort and control Flexible ball-joint cable assembly for improved manoeuvrability Robust central connector with protected hose guide Uses genuine MB501D consumables for optimum performance Euro connector for compatibility with most industrial MIG welding machines Specifications: Product Type: Water-Cooled MIG Welding Torch Model: Binzel MB EVO PRO 501D Cooling Method: Water Cooled Rated Output: 500A (Mixed Gas M21), 550A (CO₂) Duty Cycle: 100% Wire Diameter: 1.0mm – 1.6mm Connection: Euro Connector Consumables: Standard MB501D Style Applications: Heavy Fabrication, Structural Steel, Shipbuilding, Pressure Vessel Manufacture, Automotive Production and General Industrial Welding

Binzel MB36 EVO 360A Rated MIG Torch

Binzel MB EVO MB25 250A MIG Torch

Binzel MB EVO 25 Air-Cooled MIG Welding Torch – 250A Class The Binzel MB EVO 25 MIG Welding Torch is engineered to deliver exceptional performance, durability, and operator comfort for medium to heavy-duty MIG welding applications. Featuring Binzel's advanced MB EVO ergonomic handle design, this torch provides excellent balance and control, helping to reduce fatigue while improving welding precision in all working positions. Designed for professional fabrication, manufacturing, maintenance, and engineering environments, the MB EVO 25 is rated at 200A with mixed gas (M21) and 230A with CO₂ at a 60% duty cycle. It accommodates wire diameters from 0.8mm to 1.2mm, making it ideal for a wide range of mild steel, stainless steel, and general fabrication tasks. The flexible cable assembly and ball-joint connection provide outstanding manoeuvrability, while the robust Euro connector ensures compatibility with most MIG welding machines. Using genuine Binzel MB25 consumables, the torch offers reliable performance, simple maintenance, and excellent consumable availability, making it a popular choice for professional welders seeking long-lasting value and dependable results. Key Features: Genuine Binzel MB EVO 25 air-cooled MIG welding torch Ergonomic two-component handle for maximum comfort and control Flexible ball-joint cable assembly for improved manoeuvrability Robust construction for long service life in demanding environments Optimised trigger position for precise welding control Uses industry-standard MB25 consumables Euro connector for compatibility with most MIG welding machines Suitable for fabrication, maintenance, automotive and general engineering applications Specifications: Product Type: Air-Cooled MIG Welding Torch Model: Binzel MB EVO 25 Cooling Method: Air Cooled Rated Output: 200A (Mixed Gas M21), 230A (CO₂) Duty Cycle: 60% Wire Diameter: 0.8mm – 1.2mm Connection: Euro Connector Consumables: Standard MB25 Style Applications: Fabrication, Manufacturing, Automotive, Maintenance and General Engineering

Binzel MB EVO MB15 150A Rated MIG Torch

Binzel MB EVO 15 Air-Cooled MIG Welding Torch – 150A Rated The Binzel MB EVO 15 MIG Welding Torch combines proven reliability with enhanced ergonomics, making it the ideal choice for professional fabricators, maintenance engineers, and workshop welders. Designed for comfort and precision, the MB EVO 15 features Binzel's innovative ergonomic handle design, offering improved control and reduced operator fatigue during extended welding applications. Rated at 150A with mixed gas and suitable for wire diameters from 0.6mm to 1.0mm, this air-cooled torch delivers consistent performance for light to medium-duty MIG welding. The flexible cable assembly and ball-joint connection provide excellent manoeuvrability, allowing comfortable welding in a wide range of positions. Built using genuine Binzel components, the MB EVO 15 utilises the widely available MB15 consumable range, making maintenance simple and cost-effective. Its robust two-component handle, optimised trigger position, and durable construction ensure dependable performance in demanding workshop environments. Key Features: Genuine Binzel MB EVO 15 air-cooled MIG welding torch 150A rated for mixed gas welding applications Ergonomic two-component handle for improved comfort Flexible ball-joint cable assembly for enhanced manoeuvrability Optimised trigger position for precise torch control Robust construction for long service life Uses industry-standard MB15 consumables Suitable for wire diameters from 0.6mm to 1.0mm Euro connector for compatibility with most MIG welding machines Specifications: Product Type: Air-Cooled MIG Welding Torch Model: Binzel MB EVO 15 Cooling Method: Air Cooled Rated Output: 150A (Mixed Gas M21), 180A (CO₂) Duty Cycle: 60% at 150A (Mixed Gas), 35% at 180A (CO₂) Wire Diameter: 0.6mm – 1.0mm Connection: Euro Connector Consumables: Standard MB15 Style Applications: Fabrication, Automotive, Maintenance, General Engineering and Light Industrial Welding

Instagrid Go 110V Battery Pack

Instagrid Go 110V Battery Pack  Experience the freedom from mains power with the Instagrid GO Portable Power Supply System. Engineered to redefine mobile energy, this cutting-edge system delivers powerful, clean, and silent energy wherever you need it. Thanks to innovative micro-level inverter technology, the Instagrid design is compact, lightweight (just 21kg), and portable enough to carry in one hand, yet powerful enough to rival 32A/110V construction site power. With a rated output of 3.6kW and an impressive peak power output of 18kW, Instagrid Go provides dependable energy for professionals working in remote locations, construction sites, or any off-grid environment. Say goodbye to noisy, polluting generators and hello to an emission-free revolution. Built to withstand outdoor and indoor conditions, the durable IP44-rated housing ensures reliability in any weather. Featuring a simple, plug-and-play design and adaptable power outputs, Instagrid makes powering your tools, welder, or devices effortless. Whether you’re powering heavy-duty tools or sensitive electronics, rest assured that the system generates a pure AC sine wave for stable, efficient energy delivery. Connect an optional link module to pair up to three Instagrid GO units for extended jobs or larger demands. Silent, lightweight, and eco-friendly, Instagrid is the portable power solution for modern professionals demanding high-performance energy on the go. Backed by a 4-year manufacturer’s warranty, you’ll enjoy peace of mind knowing this high-performance product is built to last.

Genset 200A Honda Petrol Engine Driven Welder

Compact and lightweight portable engine driven welder. Equipped with a stage 5, 3000 RPM Honda engine.  Asynchronous alternator for enhanced welding current quality, clean and distortion-free waveform.  Just like all the GenSet engine driven welders, it is designed to be used as both generator and welder  simultaneously, its simple and smart design allows a practical and easy use.

Genset 300A Yanmar Diesel Engine Driven Welder

Compact and resistant engine driven welder, thanks to the forklift pockets and the practical central lifting hook is suitable for frequent handling. Equipped with Yanmar 3000 RPM engine and on board control, it’s fitted for remote control operation. Asynchronous alternator for a better welding current quality, clean and distortion free wave form.

Genset 400A Yanmar Diesel Engine Driven Welder

Compact and durable, fitted by central top lifting hook and forklift pockets to make handling easy. Equipped with 3000 RPM Yanmar engine 3TNV80. Control panel with digital controller to check mechanical and electrical data.  Asynchronous alternator for a better welding process quality and a clean distortion for wave form. Designed to work simultaneously both as welder and generator.

Starparts TIG Torch Power Adaptor 35-50 to 1/4" BSP

TIG Torch Power Adaptor 35-50 to 1/4" BSP The TIG Torch Power Adaptor 35-50 to 1/4" BSP is a high-quality connector designed to adapt welding power sources fitted with a 35-50 Twist Lock connection to a 1/4" BSP threaded TIG torch connection. Manufactured for reliable performance, this adaptor provides a secure electrical connection while ensuring efficient current transfer for consistent welding results. Ideal for connecting TIG torches to compatible welding machines, the adaptor is precision-engineered from durable materials to withstand the demands of professional workshop and industrial environments. Its robust construction ensures long service life, while the precision-machined threads provide a secure and reliable fit. Features Converts 35-50 Twist Lock welding machine connections to 1/4" BSP TIG torch fittings. Provides a secure, low-resistance electrical connection. Heavy-duty construction for professional and industrial use. Precision-machined for a reliable, accurate fit. Quick and easy to install. Suitable for a wide range of TIG welding applications. Whether replacing a worn adaptor or configuring a new TIG welding setup, this 35-50 to 1/4" BSP TIG Torch Power Adaptor offers a dependable and efficient connection to keep your welding equipment performing at its best.

Binzel Abiclean 1000 AC/DC TIG Brush Weld Cleaner

Binzel Abiclean 1000 AC/DC TIG Brush Weld Cleaner The Binzel Abiclean 1000 AC/DC TIG Brush Weld Cleaner is a professional electrochemical weld cleaning system designed to restore the appearance and corrosion resistance of stainless steel welds quickly, safely and efficiently. Suitable for both AC and DC operation, the Abiclean 1000 removes heat tint, oxidation and surface contamination without the need for aggressive chemicals or time-consuming mechanical cleaning. Ideal for fabricators, stainless steel manufacturers and precision welding applications, the Abiclean 1000 produces a clean, bright finish while helping to re-passivate the weld surface, improving corrosion resistance after welding. Its advanced AC/DC capability allows operators to select the most suitable cleaning mode for the application, delivering exceptional results on TIG welds and other stainless steel fabrications. Designed with ease of use in mind, the compact and robust unit is suitable for workshop and industrial environments. Combined with BINZEL's specialist cleaning brushes and electrolyte solutions, the Abiclean 1000 provides fast, consistent weld cleaning while reducing finishing time and improving productivity.  

Binzel Abicleaner 800 AC TIG Brush Weld Cleaner

Binzel Abicleaner 800 AC TIG Brush Weld Cleaner The Binzel Abicleaner 800 AC TIG Brush Weld Cleaner is a professional electrochemical weld cleaning system designed to efficiently remove heat tint, oxidation, and discolouration from stainless steel welds. Ideal for fabrication, food-grade manufacturing, pharmaceutical applications, and architectural metalwork, the Abicleaner 800 restores a clean, uniform finish while helping to maintain the corrosion resistance of stainless steel components. Utilising advanced AC cleaning technology, the system delivers fast and effective weld cleaning without the need for abrasive grinding or mechanical finishing methods. This process preserves the surface integrity of the material while significantly reducing finishing time and improving overall productivity. Designed for professional workshop and industrial environments, the Abicleaner 800 combines ease of use with reliable performance, making it an excellent solution for achieving high-quality weld finishes on stainless steel fabrications. Key Features Professional electrochemical weld cleaning system Removes heat tint, oxidation, and weld discolouration Restores the natural appearance of stainless steel surfaces AC cleaning technology for fast and effective results Helps maintain stainless steel corrosion resistance Reduces the need for grinding and abrasive finishing Improves productivity and finishing efficiency Suitable for workshop and industrial applications User-friendly operation and durable construction Specifications Product Type: Electrochemical Weld Cleaner Brand: Binzel Model: Abicleaner 800 AC Cleaning Method: AC Electrochemical Cleaning Material Compatibility: Stainless Steel Application: Weld Cleaning and Surface Finishing Applications   Ideal for stainless steel fabrication, food processing equipment, pharmaceutical manufacturing, architectural metalwork, handrail fabrication, process pipework, and general industrial welding applications where a clean, professional weld finish is required.

Trafimet Ergofresh 500W Torch Head

Trafimet EA2070 Ergofresh Lock Spring Pack OF 3

Trafimet EA2070 Ergofresh Lock Spring Pack (Pack of 3) The Trafimet EA2070 Ergofresh Lock Spring Pack is an essential replacement component designed to maintain the secure assembly and performance of Ergofresh fume extraction MIG torches. Supplied as a pack of three, these locking springs ensure critical parts such as nozzles and vacuum components remain firmly in place during operation. Specifically engineered for Ergofresh systems, the EA2070 lock spring (Ø36.5mm) provides the correct tension and fit required to hold consumables securely while allowing quick and easy removal during maintenance.  Built to Trafimet’s high manufacturing standards, these springs are designed for durability and consistent performance, even in demanding industrial welding environments where heat, vibration, and frequent consumable changes are common. Key Features: Genuine Trafimet Ergofresh locking springs (EA2070) Supplied in a convenient pack of 3 Ensures secure retention of torch consumables Designed for Ø36.5mm Ergofresh components Maintains correct fit and tension for reliable operation Durable construction for repeated use in industrial settings   Why Choose This Pack? Maintains torch integrity – Ensures components stay securely fitted, preventing performance issues or air leaks in the extraction system. Essential for fume extraction efficiency – Properly secured parts help maintain optimal airflow and extraction performance. Reduces downtime – Having a pack of 3 means quick replacements are always on hand when needed. OEM compatibility – Designed specifically for Ergofresh systems, guaranteeing correct fit and function. Built for workshop demands – Withstands heat, vibration, and regular consumable changes without losing tension. A small but vital component, the Trafimet EA2070 Lock Spring Pack helps keep your Ergofresh torch operating safely, efficiently, and at peak performance.

Trafimet FB0904-SP Ergofresh 500W Vacuum Nozzle

Trafimet FB0904-SP Ergofresh 500W Vacuum Nozzle The Trafimet FB0904-SP Ergofresh 500W Vacuum Nozzle is a precision-engineered consumable designed for use with the Ergofresh 500W fume extraction MIG torch system. It plays a critical role in capturing welding fumes directly at the source, helping maintain a cleaner, safer working environment while preserving weld quality. Specifically designed for the 500W model, this vacuum nozzle forms part of the torch’s integrated extraction system, working in combination with the gas nozzle and vacuum circuit to efficiently remove airborne contaminants before they reach the welder’s breathing zone. Its design ensures consistent airflow and stable extraction performance even in demanding industrial welding conditions. () Manufactured to Trafimet’s high standards, the FB0904-SP is built for durability, heat resistance, and long service life, making it suitable for continuous fabrication and production environments where reliability is essential. It is also designed for straightforward replacement as part of routine torch maintenance. Key Features: Designed for Ergofresh 500W fume extraction MIG torches Captures welding fumes directly at the source for improved safety Ensures consistent airflow and stable extraction performance Durable, heat-resistant construction for industrial use OEM-quality fit for reliable operation and easy replacement Essential component for maintaining torch efficiency Why Choose This Part? Improved operator safety – Works as part of the Ergofresh system to reduce exposure to harmful welding fumes at the source. Optimised extraction performance – Designed specifically for the 500W torch to maintain correct airflow balance and extraction efficiency. Reliable OEM compatibility – Ensures perfect fit and performance within the Trafimet Ergofresh system without modification. Supports consistent weld quality – Effective fume removal helps maintain better visibility and cleaner weld zones. Built for heavy-duty use – Engineered for demanding workshop and industrial environments where uptime matters. A vital consumable for maintaining your Ergofresh system, the FB0904-SP vacuum nozzle ensures your fume extraction torch continues to perform safely, efficiently, and consistently.

Trafimet FB0945 Ergofresh 45 Degree Vacuum Tube

Trafimet FB0945 Ergofresh 45° Vacuum Tube The Trafimet FB0945 Ergofresh 45° Vacuum Tube is a specialist replacement and consumable component designed for use within the Ergofresh fume extraction MIG torch system. Engineered for precision and durability, it forms part of the torch’s integrated extraction setup, helping to efficiently capture welding fumes directly at the source. Featuring a 45° angled design, the vacuum tube improves accessibility and operator comfort when working in tighter or more complex welding positions. It ensures optimal positioning of the extraction path, helping maintain consistent fume removal performance without obstructing visibility or control during welding. Manufactured to Trafimet’s high-quality standards, the FB0945 is built for reliability in demanding industrial environments, making it an essential part of maintaining safe and efficient fume extraction performance. Key Features: 45° angled vacuum tube for improved access and ergonomics Designed for use with Trafimet Ergofresh fume extraction torches Helps efficiently capture welding fumes at the source Durable construction for industrial welding environments Ensures consistent extraction performance and system reliability Easy replacement component for torch maintenance Why Choose This Part? Improved welding access – The 45° angle allows better positioning in confined or awkward welding areas without sacrificing extraction efficiency. Maintains clean air at source – Works as part of the Ergofresh system to remove fumes directly at the arc, improving operator safety and compliance. Reliable OEM-quality fit – Designed specifically for Ergofresh torches, ensuring proper sealing, airflow, and long-term durability. Essential maintenance component – Replacing worn or damaged vacuum tubes helps maintain full extraction performance and consistent weld visibility. Built for professional use – Suitable for fabrication shops, industrial welding environments, and continuous production work where reliability matters. A small but critical component, the Trafimet FB0945 ensures your Ergofresh system continues to perform safely, efficiently, and at full extraction capability.

Binzel xFume 150 TIG Torch With Fume Extraction

Binzel xFume 150 TIG Torch with Fume Extraction – Cleaner Welding, Superior Control The Binzel xFume 150 TIG Torch with Fume Extraction is an advanced welding solution designed to improve operator safety without compromising performance. Engineered for precision TIG welding, it features integrated fume extraction technology that effectively captures hazardous welding fumes directly at the source, helping maintain a cleaner and healthier working environment. Built with ergonomics in mind, the torch offers excellent handling and control, allowing for accurate, high-quality welds across a variety of applications. Its lightweight yet durable construction ensures long-lasting reliability, even in demanding industrial settings. The integrated extraction system works seamlessly with compatible fume extraction units, reducing airborne contaminants and supporting compliance with workplace safety standards. Ideal for fabrication, maintenance, and production environments, the xFume 150 combines performance with protection. Key Features: Integrated fume extraction for improved air quality Designed for precision TIG welding applications Ergonomic, lightweight design for enhanced control Durable construction for industrial use Helps reduce operator exposure to harmful fumes Compatible with external fume extraction systems Enhance both safety and performance with the Binzel xFume 150 TIG Torch – the smart choice for cleaner, more efficient welding.

Binzel xFume 150 TIG Torch With Fume Extraction

Binzel xFume 150 TIG Torch with Fume Extraction – Cleaner Welding, Superior Control The Binzel xFume 150 TIG Torch with Fume Extraction is an advanced welding solution designed to improve operator safety without compromising performance. Engineered for precision TIG welding, it features integrated fume extraction technology that effectively captures hazardous welding fumes directly at the source, helping maintain a cleaner and healthier working environment. Built with ergonomics in mind, the torch offers excellent handling and control, allowing for accurate, high-quality welds across a variety of applications. Its lightweight yet durable construction ensures long-lasting reliability, even in demanding industrial settings. The integrated extraction system works seamlessly with compatible fume extraction units, reducing airborne contaminants and supporting compliance with workplace safety standards. Ideal for fabrication, maintenance, and production environments, the xFume 150 combines performance with protection. Key Features: Integrated fume extraction for improved air quality Designed for precision TIG welding applications Ergonomic, lightweight design for enhanced control Durable construction for industrial use Helps reduce operator exposure to harmful fumes Compatible with external fume extraction systems Enhance both safety and performance with the Binzel xFume 150 TIG Torch – the smart choice for cleaner, more efficient welding.

TIG Aesthetics 4.5/5" Silicone Purge Plugs

TIG Aesthetics By Ticon 4.5/5" Silicone Purge Plugs TIG Aesthetics by Ticon – 4.5/5" Silicone Purge Plugs Precision Engineered for Clean, Consistent Weld Purging The TIG Aesthetics by Ticon 4.5/5" Silicone Purge Plugs are a premium solution for weld purging applications, specifically designed for use in stainless steel and titanium TIG welding. Manufactured from high-quality, high-temperature silicone, these plugs provide a reliable, airtight seal inside pipework and tubing during purging operations, ensuring optimal shielding gas coverage and oxygen displacement. Built to fit 4.5/5"  pipe and tube, these reusable silicone plugs are ideal for fabricators and welders demanding consistently clean, oxide-free welds—especially critical in food-grade, aerospace, pharmaceutical, and high-purity process industries. Key Features: High-Temperature Resistant Silicone – Withstands elevated temperatures without warping or degrading, making it perfect for prolonged TIG welding operations. Flexible & Durable Construction – Conforms to slight pipe variations while maintaining a secure fit, ideal for repeated use. Optimized Gas Sealing – Creates a tight seal to maintain positive pressure and effective shielding during back purging. Reusable & Cost-Efficient – Easily cleaned and long-lasting, offering excellent value over time compared to single-use alternatives. Color-Coded for Quick Sizing – Allows for fast identification of sizes in workshop environments. Technical Specifications: Size Compatibility: 4.5/5" OD Pipe  Material: High-grade silicone (food-safe and chemical resistant) Temperature Resistance: Up to approx. 315°C (600°F) Reusability: Multiple weld cycles with proper care Seal Type: Friction-fit, gas-tight seal Recommended Use: With inert gases such as Argon for TIG purging Applications: Stainless steel and titanium TIG welding Pipe and tube fabrication Food-grade and pharmaceutical installations Aerospace and high-purity systems Any application requiring weld oxide prevention on the ID Why Choose TIG Aesthetics by Ticon Purge Plugs?   Trusted by top fabricators around the world, these silicone purge plugs offer a high-performance, reusable solution for back purging operations. Designed for precision and built for durability, they help achieve flawless internal welds, saving time on post-weld cleaning and ensuring compliance with even the most stringent weld standards. Replacement purge plugs for the TIG Aesthetics sets  Come as a pack of 2 plugs with diffusers 

ESAB Rebel EMP 205ic AC/DC Multi-Process Welder Package 110/230V

ESAB Rebel EMP 205ic AC/DC Multi-Process Welder Package (110/230V) The ESAB Rebel EMP 205ic AC/DC is a powerful, all-in-one multi-process welder designed for professionals who demand flexibility, precision, and performance. Capable of MIG, TIG (AC/DC), and Stick welding, this advanced machine is ideal for a wide range of applications, including steel, stainless steel, and aluminium fabrication. With dual voltage capability (110V/230V), the Rebel EMP 205ic adapts effortlessly to different power sources, making it perfect for both workshop and on-site use. Its AC/DC TIG functionality allows for high-quality aluminium welding, while its advanced arc control ensures smooth, stable performance across all processes. Featuring ESAB’s intuitive interface, including a high-resolution display and Smart-MIG technology, the welder automatically adjusts parameters for optimal results, helping both experienced welders and newcomers achieve professional-quality welds with ease. Built with durability in mind, the rugged, industrial-grade housing is designed to withstand tough working environments, while its portable design ensures easy transport between jobs. Key Features: Multi-process capability: MIG, TIG (AC/DC), and Stick welding Dual voltage input: 110V and 230V for maximum flexibility AC/DC TIG welding for aluminium and precision work Smart-MIG technology for automatic parameter optimisation User-friendly digital interface with high-resolution display Robust, durable construction for industrial environments Portable design for workshop and on-site applications Whether you're fabricating, repairing, or working on complex welding projects, the ESAB Rebel EMP 205ic AC/DC delivers exceptional performance, versatility, and reliability in one compact package.

Instagrid One 230V Battery Pack Includes 16A & 13A Outlets

Instagrid One 230V Battery Pack – Portable Power Without Limits The Instagrid One 230V Battery Pack is a high-performance, professional-grade portable power solution designed to deliver reliable, grid-quality electricity wherever you need it. Engineered for demanding environments, it provides a continuous 230V AC output, making it ideal for powering heavy-duty tools, equipment, and devices on construction sites, outdoor locations, or emergency situations. Equipped with both 16A and 13A outlets, the Instagrid One offers versatile connectivity for a wide range of applications, from industrial machinery to everyday electrical devices. Its advanced lithium-ion battery technology ensures consistent power delivery, while its robust design guarantees durability in tough working conditions. Unlike traditional generators, the Instagrid One operates silently and produces zero emissions, making it a cleaner, safer alternative for indoor and outdoor use. Its compact, portable form factor allows for easy transport and quick setup, helping you stay productive without the hassle of fuel, fumes, or noise.  

Starparts WP26 Rigid TIG Torch Body - 200A Rated

The WP26 Rigid TIG Torch Body is a robust and versatile welding torch component designed for professional TIG welders who require durability and precise control. Built to handle demanding welding applications, the WP26 features a Rigid neck design. Manufactured from high-quality, heat-resistant materials, the WP26 torch body is engineered to withstand high temperatures and extended welding sessions. Its ergonomic construction helps reduce operator fatigue while providing a comfortable grip and improved maneuverability during detailed welding work. The torch body is compatible with standard WP26 series TIG torch components, making it a reliable replacement or upgrade for existing setups. It supports a wide range of tungsten electrodes and consumables, ensuring consistent arc stability and clean weld performance across various metals including steel, stainless steel, and aluminum. Designed for air-cooled TIG welding systems, the WP26 Rigid Torch Body delivers dependable performance in fabrication, repair, maintenance, and industrial welding environments.   

Starparts WP26F Flexible TIG Torch Body - 200A Rated

The WP26F Flexible TIG Torch Body is a robust and versatile welding torch component designed for professional TIG welders who require durability, flexibility, and precise control. Built to handle demanding welding applications, the WP26F features a flexible neck design that allows the torch head to be easily adjusted to reach tight spaces and complex joint angles without compromising stability. Manufactured from high-quality, heat-resistant materials, the WP26F torch body is engineered to withstand high temperatures and extended welding sessions. Its ergonomic construction helps reduce operator fatigue while providing a comfortable grip and improved maneuverability during detailed welding work. The torch body is compatible with standard WP26 series TIG torch components, making it a reliable replacement or upgrade for existing setups. It supports a wide range of tungsten electrodes and consumables, ensuring consistent arc stability and clean weld performance across various metals including steel, stainless steel, and aluminum. Designed for air-cooled TIG welding systems, the WP26F Flexible Torch Body delivers dependable performance in fabrication, repair, maintenance, and industrial welding environments. Its combination of strength, adjustability, and compatibility makes it an essential component for welders seeking improved access and precision in challenging welding positions.  

ESAB TBI511 (501) Water-Cooled Euro Fit MIG Torch

Product Overview The ESAB TBI 511 (501) Water-Cooled Euro Fit MIG Torch is a heavy-duty, industrial-grade welding torch designed for high-amperage MIG applications and continuous duty cycles. As part of the ESAB TBi Expert series, this torch combines advanced cooling performance with ergonomic design to deliver reliability, durability, and operator comfort in demanding environments. Built for professional fabrication and production welding, the TBI 511 is ideal where air-cooled torches would struggle to manage heat under sustained high-current use.  

ESAB TBI360 Air-Cooled Euro Fit MIG Torch

The ESAB TBi 360 Expert Euro MIG Torch (often referred to as the ESAB TBI360 Air-Cooled Euro Fit MIG Torch) is a robust and ergonomic air-cooled MIG welding torch designed for professional and industrial welding applications. Built as part of ESAB’s respected TBi Expert series, it combines durability, operator comfort, and compatibility with Euro-style MIG systems to deliver reliable performance across a wide range of welding tasks.  

Kemppi X5 FastMig 500A Pulse Water-Cooled MIG Welder With GXE405W Torch

Kemppi X5 FastMig 500A Pulse Water‑Cooled MIG Welder With GXE405W Torch The Kemppi X5 FastMig 500A Pulse is a professional‑grade water‑cooled MIG/MAG welding system engineered for demanding industrial applications requiring high performance, precision, and reliability. Designed to deliver advanced pulse welding capabilities, this robust welder provides exceptional control and arc stability across a wide range of materials and thicknesses, making it ideal for fabrication, structural welding, and production environments. With a powerful 500 A output and water‑cooled design, the FastMig 500A Pulse ensures excellent thermal management and extended duty cycles — even under heavy usage. The included GXE405W water‑cooled MIG torch offers enhanced operator comfort and superior cooling performance, enabling longer weld runs with reduced heat‑related strain on consumables and cables. Equipped with pulse welding technology, this system allows for refined control over penetration, bead shape, and spatter reduction, providing welders with clean, high‑quality results on challenging joints and materials. The intuitive control interface simplifies parameter selection, while the rugged construction ensures durability and longevity in tough workshop conditions. Whether tackling precision fabrication or high‑volume production work, the Kemppi X5 FastMig 500A Pulse welder delivers consistent, premium‑grade performance you can rely on. Key Features: 500 A water‑cooled MIG/MAG welding system Manual, synergic, pulse, and double pulse welding options are available Includes GXE405W water‑cooled MIG torch for enhanced thermal performance Excellent duty cycle and heat management for extended welding runs Ideal for fabrication, structural welding, and industrial applications Compatible with all MAX welding processes as well as WiseFusion, WisePenetration, and WiseSteel welding processes A 5-year warranty is available through end-user registration in the MyFleet service. Built to last Easy to operate and fast to adapt. 5.7" TFT screen panel Weld Assist Energy Efficient Cooling Native connection to WeldEye welding management software Fully customisable screen Easy changing of wire spools 30% less spatter in steel welding Intelligent narrow gap welding A high‑performance, versatile MIG welding solution built for professionals demanding consistent quality and power. Kit Includes X5 FastMIG 500 A water‑cooled MIG/MAG welding system GXE405W water‑cooled MIG torch X5 Wire Feeder 300 X5 Water Cooler  

Kemppi X5 FastMig 500A Manual Water-Cooled MIG Welder With GXE405W Torch

Kemppi X5 FastMig 500 Manual 400V, 500A With GXE405W 3.5 m Water-Cooled MIG Torch The Kemppi X5 FastMig 500 Manual is a high‑performance industrial MIG/MAG welding power source designed for demanding professional welding applications. Combining robust construction with advanced welding technology, this 400 V, 500 A machine delivers reliable performance and excellent arc control across a wide range of materials and welding situations. Included with this package is the GXE405W 3.5 m water‑cooled MIG torch, engineered to provide superior thermal management and operator comfort during extended welding sessions. The water‑cooled design enhances duty cycle performance, making the torch ideal for heavy‑duty production work where consistent cooling and reliability are essential. The X5 FastMig range is known for its intuitive manual control interface and robust power delivery, giving welders precise control over welding parameters. With a focus on smooth wire feed and stable arc characteristics, this system excels in applications requiring repeatable, high‑quality welds, such as fabrication, structural steelwork, mechanical assembly, and maintenance tasks. Built for durability and long service life, the Kemppi X5 FastMig 500 Manual delivers dependable performance in busy workshops and industrial environments. Its combination of power, control, and ergonomic torch design makes it an excellent choice for professional welders who demand consistent results. Key Features: 500 A water‑cooled MIG/MAG welding system Includes GXE405W water‑cooled MIG torch for enhanced thermal performance Excellent duty cycle and heat management for extended welding runs Ideal for fabrication, structural welding, and industrial applications Compatible with all MAX welding processes as well as WiseFusion, WisePenetration, and WiseSteel welding processes A 5-year warranty is available through end-user registration in the MyFleet service. Built to last Easy to operate and fast to adapt. 5.7" TFT screen panel Weld Assist Energy Efficient Cooling Native connection to WeldEye welding management software Fully customisable screen Easy changing of wire spools 30% less spatter in steel welding Intelligent narrow gap welding A high‑performance, versatile MIG welding solution built for professionals demanding consistent quality and power. Applications MIG / MAG DC TIG MMA Welding Gouging Kit Includes X5 FastMIG 500 A water‑cooled MIG/MAG welding system GXE405W water‑cooled MIG torch X5 Wire Feeder 300 X5 Water Cooler

Kemppi MasterTig 535AC/DC Watercooled TIG Welder Package With TX455W Torch

Kemppi MasterTig 535AC/DC Water-Cooled TIG Welder Package With TX455W Torch The Kemppi MasterTig 535AC/DC is a premium industrial-grade TIG welding package engineered for high-performance fabrication and production environments. Designed for demanding applications, this powerful AC/DC TIG system delivers exceptional arc stability, precision control, and outstanding weld quality across a wide range of materials, including aluminium, stainless steel, and other alloys. With an impressive 500A output, the MasterTig 535AC/DC is built to handle heavy-duty welding tasks with ease. The integrated water-cooling system ensures excellent thermal management, supporting extended duty cycles and consistent performance during prolonged operation. This complete package includes the high-performance TX455W water-cooled TIG torch, designed for superior ergonomics, control, and comfort during long welding sessions. The system is typically supplied as a ready-to-weld solution, including a cooling unit, trolley, earth lead, and essential gas accessories — providing a comprehensive professional setup. The MasterTig platform is known for its intuitive control interface and advanced welding features. With programmable memory channels and application-based parameter support, users can optimise settings quickly and maintain repeatable weld quality. Optional features such as pulse functions and advanced AC controls further enhance precision, particularly when working with aluminium and thinner materials. Built for reliability, versatility, and productivity, the Kemppi MasterTig 535AC/DC package is ideal for fabrication workshops, manufacturing facilities, and maintenance operations that demand consistent, high-quality TIG welding performance. Key Features: 500A AC/DC TIG welding output Water-cooled system for extended duty cycles Includes TX455W water-cooled TIG torch Advanced control interface with programmable memory channels Suitable for aluminium, stainless steel, and alloy welding Complete professional ready-to-weld package A powerful, feature-rich TIG welding solution designed to meet the needs of professional welders working in demanding industrial environments.

Kemppi GXe 323G Air Cooled 320A MIG Torch Euro Connection

Kemppi Flexlite GXe 323G Air Cooled 320A MIG Torch – Euro Connection The Kemppi Flexlite GXe 323G is a premium air-cooled MIG/MAG welding torch engineered for demanding professional and industrial welding applications. Part of Kemppi’s Flexlite GXe series, this torch combines robust build quality with ergonomic design to deliver reliable performance, enhanced comfort, and long service life. With a 320 A rating, the GXe 323G is suited to heavier welding tasks, making it ideal for fabrication, structural welding, maintenance, and production environments. The standard Euro connection ensures wide compatibility with a range of MIG welding systems, offering convenience and flexibility for workshops and welding professionals. The air-cooled design simplifies setup and reduces the need for external cooling systems, while still providing excellent heat management during extended welding cycles. Ergonomically shaped for reduced operator fatigue, the torch features a balanced pistol grip and a flexible, durable cable assembly that promotes smooth wire feed and ease of movement at the workpiece. Built to handle tough welding conditions, the Kemppi Flexlite GXe 323G delivers consistent arc quality, durability, and user comfort across a wide range of MIG welding applications. Key Features: 320 A air-cooled MIG/MAG welding torch Standard Euro connection for broad machine compatibility Ergonomic design for improved comfort and control Flexible, durable cable system for smooth wire feed Suitable for common MIG wire diameters A high-performance, professional-grade torch that delivers power, reliability, and versatility for everyday welding work.

Kemppi GXe K3 253G 250A MIG Cooled Torch Euro Connection

Kemppi Flexlite GXe K3 253G 250A MIG Cooled Torch – Euro Connection The Kemppi Flexlite GXe K3 253G is a high-performance gas-cooled MIG/MAG welding torch designed for professional and industrial fabrication environments. Part of Kemppi’s trusted Flexlite GXe range, this torch delivers dependable arc performance, durability, and excellent operator comfort during extended welding sessions. Rated at 250A, the GXe K3 253G is ideal for medium-to-heavy duty welding applications. The standard Euro connection ensures compatibility with a wide range of MIG welding machines, making it a versatile addition to any workshop setup. Engineered with ergonomics in mind, the torch features a well-balanced pistol grip handle and a rotating neck to improve accessibility in various welding positions while reducing operator fatigue. Its flexible and durable cable assembly promotes smooth wire feeding and enhanced manoeuvrability, even in demanding working conditions. Built for reliability and ease of use, the Kemppi Flexlite GXe K3 253G offers consistent performance, excellent heat management, and long service life — making it a dependable choice for fabrication, maintenance, and production welding tasks. Key Features: 250A gas-cooled MIG/MAG welding torch Standard Euro connection for broad machine compatibility Ergonomic handle design for improved comfort and control Flexible, durable cable system for smooth wire feed Suitable for a range of common MIG wire diameters   A robust, professional-grade torch designed to deliver performance, comfort, and reliability in everyday welding applications.

Kemppi Minarc T 223 AC/DC 230V TIG Welder Package 4Mtr Torch

Kemppi Minarc T 223 AC/DC 230V Air-Cooled TIG Welder Package (4m Torch Included) The Kemppi Minarc T 223 AC/DC is a versatile, multi-function TIG welding solution designed for professional fabrication, maintenance, and precision engineering applications. Operating from a standard 230V single-phase supply, this compact yet powerful unit delivers high-quality AC/DC TIG welding performance — and also offers TIG weld cleaning functionality — all in one machine. With full AC/DC capability, the Minarc T 223 enables precision welding on mild steel, stainless steel, and aluminium. The AC function provides excellent control when welding aluminium, while DC TIG delivers smooth, stable arcs on steels and stainless materials. Advanced arc control ensures reliable starts, consistent penetration, and clean bead appearance across a wide range of material thicknesses. Integrated TIG Weld Cleaning Function In addition to welding, the Minarc T 223 can be used for the electrochemical cleaning of TIG welds. This allows users to remove heat tint and oxidation from stainless steel welds quickly and efficiently using the same machine, eliminating the need for a separate weld cleaning unit and improving workflow efficiency in fabrication environments. Supplied as a complete package with a 4 metre air-cooled TIG torch, this system is ready for workshop or site use. Its compact, portable design and durable construction make it ideal for mobile engineers, fabrication shops, automotive restoration, and industrial maintenance. Key Features: Premium multi-voltage AC/DC TIG welding machine with built-in weld cleaning function DC+ and DC- MMA welding 220 A with 20% duty cycle from a 1-phase power supply WeldClean electrolytic cleaning process speeds up post-processing of welds Large LCD display Four memory channels Auto Pulse with frequency control AC balance control Three alternative transport cart options Set parameters remotely with an optional on-torch remote Control your welding with the FR41 wired foot pedal The Kemppi Minarc T 223 AC/DC combines welding and post-weld cleaning in one compact unit — delivering flexibility, efficiency, and professional results from a single machine. Kit Includes: Kemppi Minarc T 223 AC/DC 230V TIG welder Kemppi Flexlite TX 225 4Mtr long air-cooled TIG torch 

Kemppi Master M 355G Pulse Watercooled MIG Welder 350A 415V

Kemppi Master M 355G Pulse Water-Cooled MIG Welder – 350A, 415V The Kemppi Master M 355G Pulse is a premium-grade MIG/MAG welding power source engineered for demanding industrial environments where precision, control, and productivity are paramount. Featuring advanced pulsed welding capabilities, a robust water-cooled design, and intuitive control systems, this 350 A, 415 V unit delivers superior arc performance across a wide range of materials and thicknesses. Built on Kemppi’s Master platform — renowned for durability, versatility, and performance — the Master M 355G Pulse is ideal for heavy fabrication, structural welding, shipbuilding, automotive production, pressure vessel work, and other high-output welding operations. Pulsed MIG for Precision & ControlThe pulsed MIG function of the Master M 355G enables welders to precisely control heat input, reduce spatter, and achieve superior bead aesthetics, particularly on thin or heat-sensitive materials. Pulsing allows rapid transitions between peak and background currents, resulting in stable arcs and smooth metal transfer across a wide range of applications — from mild steel and stainless steel to aluminium alloys. Water-Cooled Capability for Continuous PerformanceEquipped with an efficient water-cooling system, the Master M 355G is designed to maintain optimal operating temperatures during long, high-duty-cycle welding. This cooling architecture enhances performance and extends component life under heavy industrial use — a crucial advantage over air-cooled units in production environments where welding cycles are frequent and uninterrupted. Synergic Control for Effortless SetupKemppi’s synergic control technology automatically adjusts voltage and wire feed parameters based on the selected consumable, material type, and thickness. This simplifies setup, reduces guesswork, and delivers consistent results — so operators spend less time configuring machines and more time welding. Industrial Strength & FlexibilityWith a powerful 350 A output and rugged build quality, the Master M 355G Pulse handles thick-plate welding while still offering refined control on thinner sections. Its modular design and multiple interface options — including remote control panels and advanced MIG guns — help integrate the unit seamlessly into production workflows. Key Features: 350 A output, 415 V three-phase supply for heavy-duty industrial welding Pulsed MIG technology for reduced spatter and precise heat control Water-cooled system for extended duty cycles and component longevity Synergic control for automatic parameter optimisation Superior arc stability with excellent bead quality Supports steel, stainless steel, and aluminium welding Advanced control interfaces & remote options Rugged industrial construction for continuous production use Ideal For: Heavy fabrication and structural steelwork Automotive, shipbuilding, and transportation manufacturing Pressure vessel and structural component welding High-volume production environments require precise control Kit Includes: Kemppi Master M 355G MIG Welder Kemppi Master M Water Cooler Kemppi Flexlite GXe 305W5 - 5m Water-cooled MIG welding torch The Kemppi Master M 355G Pulse combines cutting-edge welding technology with industrial workload durability — offering a high-productivity solution for professional welders and fabrication specialists who demand consistent performance and precision.

Kemppi Master M 353G Synergic Air Cooled MIG Welder 350A 415V

Kemppi Master M 353G Synergic Air-Cooled MIG Welder – 350A, 415V The Kemppi Master M 353G Synergic is a high-performance MIG/MAG welding power source engineered for demanding industrial environments. With a rugged design, advanced control features, and robust arc characteristics, this 350 A, 415 V air-cooled system delivers exceptional productivity and weld quality across a wide range of materials and applications. Built on Kemppi’s proven Master platform, the Master M 353G combines flexibility with ease of use. Its synergic control system automatically manages key welding parameters based on the selected wire type and diameter, simplifying setup and reducing the need for manual adjustments. This makes it ideal for high-output fabrication, structural steelwork, pressure vessels, and heavy engineering, where consistent results are critical. Precision Performance & Synergic Control At the heart of the Master M 353G is its advanced synergic technology, which dynamically adjusts voltage and wire feed speed in real time. Welders simply select the material and wire type, and the machine calculates optimal parameters — ensuring stable arcs, reduced spatter, and excellent bead appearance, even in challenging joint configurations. Industrial Durability & Compact Efficiency Designed for harsh workshop and production environments, the Master M 353G features a robust, air-cooled build with high-quality electrical components that withstand long operating cycles. Its efficient cooling system maintains performance during heavy use while reducing maintenance needs compared to more complex liquid-cooled units. Wide Application Range With a maximum output of 350 A, this unit handles thick-section welding with ease while offering the control needed for thinner materials. It supports a broad range of consumables and metal types — including mild steel, stainless steel, and aluminium — making it a versatile choice for everything from light fabrication to heavy structural work. Advanced Connectivity & Control Options The Master M 353G offers multiple control interfaces, including remote control panels and optional MIG guns with trigger switches. Integrated diagnostics and intuitive user settings enable fast setup, reduced downtime, and improved workflow efficiency on busy production floors. Key Features: Red Dot Product Design Award winner 2023 Versatile process selection for industrial welding: Manual, 1-MIG, Pulse MIG, DC TIG, and stick welding (MMA) Welding programs include Fe, Ss, Al, CuSi, CuAl, Fe Metal, Fe Rutil, FC-CrNiMo materials MAX and Wise welding processes for challenging steel, stainless steel, and aluminium welding applications Cobot-ready welding machine, fast and easy setup with a Digital Connectivity Module and Kemppi Cobotics app Weld Assist establishes guidance for welding parameters Self-charging LED work lights improve work safety Safe-lift grab handle for safe lifting Two and four-wheel carriage options for easy movement SuperSnake GTX sub-feeder enables maximum reach in challenging welding sites Reports welds and work orders to WeldEye software through the welding machine's user interface WeldEye ArcVision offers better insight into your welding production WeldEye Quality Management offers a 360-degree view and 100% traceability of every welding project Kinetic spool brake prevents wire spool overrun, automatically slowing and reversing the filler wire spool at the end of each weld Compatible with a generator and multi-voltage use Memory channels for saving the best welding parameter settings Weight 27 kg Ultimate welding comfort and long-lasting, high-quality consumables with Flexlite GXe welding guns Ideal For: Industrial fabrication and structural steelwork Shipbuilding and heavy engineering Pressure vessel and pipeline fabrication High-volume manufacturing environments Kit Includes: Kemppi Master M 353G Synergic Air Cooled MIG Welder Kemppi Flexlite GXe323G 3.5Mtr MIG Welding Torch The Kemppi Master M 353G is an investment in performance, reliability, and productivity — a welding platform that empowers operators to work faster, cleaner, and with confidence across the full spectrum of MIG/MAG applications.

Jasic Two Wheel Trolley with Toolbox

Jasic Inverter Trolley with Toolbox The Jasic Two-Wheel Trolley (TR-01) is purpose-built to provide a practical, durable and mobile solution for your EVO TIG and plasma equipment. Designed specifically for the Jasic EVO TIG 200P AC/DC Water Cooled Welder (ET-200PACDC-WC) and the Jasic EVO Cut 45 Plasma Cutter with Compressor (EP-45SC), this trolley ensures a secure fit and seamless integration with your machine. Designed for workshop and site use, the robust two-wheel design provides smooth transportation while maintaining excellent stability during operation. The integrated toolbox provides convenient storage for consumables, accessories and essential tools, helping you keep your workspace organised and efficient. Ideal for professionals who need mobility without compromising on durability, the TR-01 trolley makes transporting and storing your EVO equipment simple, tidy and reliable. Alternatively, take a look at the TR-02, which comes without a toolbox.

Jasic Inverter Welding Trolley with Accessory Drawer

Heavy-Duty Welding Machine Trolley with Accessory Drawer Designed for strength, stability, and everyday workshop use, this heavy-duty welding machine trolley provides a reliable and organised solution for transporting welding equipment with ease. Built from robust steel construction, it is engineered to support a wide range of welding machines while standing up to the demands of busy industrial and fabrication environments. The stable four-wheel design ensures smooth, controlled movement across the workshop floor, allowing you to reposition your equipment safely and effortlessly. Dedicated gas bottle storage keeps cylinders secure during use, while the integrated torch and cable holders help maintain a tidy, hazard-free workspace. For added convenience, the trolley features a soft-close drawer ideal for storing tools, consumables, and accessories, along with an under-shelf storage area for larger items. Everything you need stays organised, accessible, and ready to go, improving workflow and efficiency on the job. Built with practicality and durability in mind, this welding machine trolley is the perfect companion for professional workshops that value mobility, organisation, and long-lasting performance. Key Features: Heavy-duty steel construction for professional use Stable 4-wheel design for smooth movement and control Suitable for a wide range of welding machines Gas bottle storage Drawer storage with soft-close hinges for tools and accessories  Under-shelf storage for tools and accessories Integrated torch and cable holders for neat organisation

Jasic Inverter Welding Trolley

Heavy-Duty Welding Inverter Trolley Built for strength, stability, and everyday workshop use, this heavy-duty welding inverter trolley offers a reliable, practical solution for transporting welding equipment. Manufactured from robust steel construction, it is designed to support a wide range of welding machines while withstanding the demands of busy industrial and fabrication environments. The stable four-wheel design allows for smooth, controlled movement across the workshop floor, making it easy to reposition your welding inverter safely and efficiently. Integrated gas bottle storage keeps cylinders secure during operation, while the under-shelf storage area offers convenient space for tools, consumables, and accessories. To maintain a tidy and organised workspace, the trolley features integrated torch and cable holders, reducing clutter and improving safety. Durable, practical, and easy to manoeuvre, this welding inverter trolley is an essential addition to any professional workshop looking to improve mobility and efficiency. Key Features: Heavy-duty steel construction for professional use Stable 4-wheel design for smooth movement and control Suitable for a wide range of welding machines Gas bottle storage Under-shelf storage for tools and accessories Integrated torch and cable holders for neat organisation

Jasic Plasma Max Cut 160 Package

Jasic Plasma Max Cut 160 When power and accuracy combine, you get the Jasic MAX CUT 160 - a heavy-duty plasma cutter built to take on your toughest cutting jobs with ease. Its advanced IGBT inverter delivers a 100% duty cycle at 125 amps, allowing you to cut thick materials continuously without worrying about overheating or costly downtime. From precision cuts on 40mm steel to severance cuts up to 60mm, the MAX CUT 160 consistently produces clean, smooth edges with minimal dross, saving you time on cleanup and boosting overall efficiency. Operation is simple and controlled thanks to a high-definition digital display with encoder adjustment, giving you clear, accurate settings even when you’re up against tight deadlines. Designed for demanding site conditions, it features a sealed, dust-free air passage and an intelligent cooling system that activates only when required to protect internal components and extend machine life. The NON-HF arc ignition makes it ideal for CNC cutting systems, preventing the electrical interference that can cause issues with sensitive automated equipment. And with a 5-year warranty, you can work with complete confidence, knowing your machine is fully backed and built to last. Whether you’re handling continuous cutting, mesh applications, or plasma arc gouging, the MAX CUT 160 delivers the high-level performance your projects—and your business—depend on. Key Features Excellent cutting results with limited dross and smooth cutting surface Continuous cutting, mesh cutting and plasma arc gouging functions Auto-detection for edge and pierce starts 100% duty cycle at 125 Amps Ideal for automated CNC applications NON-HF arc ignition significantly reduces the interference of arc ignition on CNC equipment Dust-free sealed air passage On-demand fan cooling High definition digital display  5-Year Warranty

Jasic Plasma Max Cut 125 Package

Jasic Max Cut 125 The Jasic MAX CUT 125 brings together serious power and precision, giving you a plasma cutter that’s built to take on demanding industrial work with ease. Thanks to its advanced IGBT inverter technology, it delivers a true 100% duty cycle at 125 amps, allowing you to cut thick materials continuously without overheating or losing productivity. Whether you’re making smooth, accurate cuts on 30mm steel or achieving severance cuts up to 50mm, the MAX CUT 125 provides impressively clean results with minimal dross. That means less cleanup, less downtime, and a better finish straight off the table. Control is effortless with the high-definition digital display and encoder dial—no confusing menus or wasted time when you’re under pressure. Designed for tough environments, the machine features a sealed, dust-free air passage and an intelligent cooling system that activates only when needed, protecting internal components and extending lifespan. Its NON-HF arc ignition makes it an excellent choice for CNC use, avoiding the electrical interference that can disrupt automated cutting systems. And with a 5-year warranty, you can rely on long-term performance and total peace of mind.  From continuous cutting and mesh work to plasma arc gouging, the MAX CUT 125 adapts to your workflow and consistently delivers the professional-quality results your business depends on. Key Features Excellent cutting results with limited dross and smooth cutting surface Continuous cutting, mesh cutting and plasma arc gouging functions Auto-detection for edge and pierce starts 100% duty cycle at 125 Amps Ideal for automated CNC applications NON-HF arc ignition significantly reduces the interference of arc ignition on CNC equipment Dust-free sealed air passage On-demand fan cooling High definition digital display  5-Year Warranty

Parweld Handheld Tungsten Electrode Grinder

Parweld Handheld Tungsten Electrode Grinder The Parweld Handheld Tungsten Electrode Grinder is a compact, precision-engineered tool designed to deliver consistently sharp, accurate tungsten points for high-quality TIG welding. Built for convenience and reliability, this grinder allows welders to achieve perfect angles every time, improving arc stability, reducing tungsten contamination, and enhancing overall weld quality. Lightweight and easy to handle, the Parweld grinder is ideal for on-site work, workshop use, and maintenance environments. Its enclosed grinding chamber helps contain dust and debris, promoting cleaner, safer operation. Key Features: Precision grinding for consistent, repeatable tungsten points Improves arc stability and weld performance Portable, handheld design for maximum convenience Enclosed grinding head reduces dust exposure Durable construction suitable for professional use Compatible with common tungsten sizes used in TIG welding Ideal for: Fabricators, welders, maintenance engineers, and workshop technicians   Whether you're looking to enhance weld quality or streamline electrode preparation, the Parweld Handheld Tungsten Electrode Grinder provides the accuracy and dependability professionals expect.   AVAILABLE IN 110V & 230V OPTIONS

Jasic EVO Power Arc 140 MMA Welder

Power Arc 140 Inverter – Tough, Reliable, and Built for Performance Engineered for demanding environments, the Power Arc 140 Inverter combines rugged durability with advanced welding control. Its ergonomic design makes it comfortable to handle, while intelligent synergic control delivers smooth, consistent welds across a wide range of applications. With Smart Lift TIG capability, the Power Arc 140 provides precise arc starts with minimal spatter. Adjustable Hot Start and Arc Force settings let you fine-tune performance for different jobs, while anti-stick protection prevents electrodes from fusing, helping maintain a cleaner, more efficient workflow. The innovative ABAP (Active Balancing Air Passage) system enhances cooling efficiency, supported by a fan-on-demand feature that reduces noise and extends component life. For added safety, the built-in Voltage Reduction Device (VRD) protects operators in low-voltage environments, while internal safeguards defend against overcurrent and overheating. Designed for reliability, the Power Arc 140 features robust 35–50 mm cable sockets, ensuring a secure, professional connection every time. Dependable, efficient, and built to last — it’s the perfect solution for professional welding performance wherever it’s needed. *** PLEASE NOTE MACHINE COMES WITHOUT LEAD SET *** Key Features Rugged ergonomic design Intelligent synergic control Smart Lift TIG Anti-Stick, adjustable hot start and arc force ABAP: Active Balancing Air Passage Fan on demand Voltage Reduction Device (VRD) Key power electronic component protection Overcurrent and overheat 35-50mm Cable sockets Backed by a 5-Year Warranty.

Starparts TIG Torch Power Adaptor 35-50 to 3/8" BSP

Jasic EVO MIG 350S Multi Process Separate Water

Jasic EVO MIG 350S Multi Process Separate Water Cooled The Jasic EVO MIG 350S, a Separate Water-Cooled Model, is built for professionals who demand durability and accuracy in every weld. Powered by an advanced ARM and DSP dual microprocessor system, it regulates the arc output in real time, adapting instantly as conditions change across MIG/MAG, MMA, and DC Lift-TIG processes. The separate wire feed unit is equipped with a ClearVision HD digital display for enhanced visibility and control. Hollow rotary shaft encoders give precise adjustments, while 2T/4T, Cycle, and Spot trigger functions make it simple to adapt to your preferred welding style. With both synergic and manual modes available, you’ll achieve smooth droplet transfer and consistent bead quality no matter the application. For longer sessions, the integrated water-cooled technology keeps the torch running at peak performance. The dual drive wire feeder features 37.45mm rollers, ensuring reliable delivery even with demanding materials. An IP23S protection rating and robust component protection provide long-term reliability. Backed by Jasic’s 5-year warranty, it’s a machine built to last. Efficiency comes as standard. Smart cooling only runs when needed, while auto sleep mode reduces power draw to under 10W when idle, helping to lower running costs without affecting performance. Engineers Mode provides quick access to proven parameter settings, and built-in program memory stores your own configurations for repeat jobs. Connectivity is also taken further. Control the machine your way—via wired, wireless, or mobile app options. The USB-C port allows easy software updates and device charging, and with generator-friendly operation, the EVO MIG 350S is just as dependable on-site as it is in the workshop. What’s included in the Kit: MIG/Multi Process Welder Dual Drive Wire Feed Unity (4 Roll) Interconnections 5m Trolley Water Cooler Hard Core Water Cooled MIG Torch 4m Feedrolls Regulator Gas Hose & Earth Lead Why we love the EVO MIG 350S Multi Process Separate Air Cooled Rugged, ergonomic design Water Cooled Package Advanced inverter technology with ARM and DSP digital microprocessor control Separate wire feed unit with ClearVision digital display and full parameter control ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment 2T/4T/Cycle and Spot trigger control Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable Excellent welding characteristics with enhanced droplet transfer Crater fill setting On demand cooling and auto sleep mode ensures market leading energy efficiency with idle power consumption of less than 10W Key power electronic component protection Standard MIG, Push Pull or Spool Gun torch selection Enhanced dual drive wire feeder with 37.45mm rollers Program memory storage (10 per process) Welding Engineers Mode for default parameter selection IP23S protection class rating Flexible remote control solutions including wired, wireless and mobile app control USB Type-C port for software updates and device charging Generator friendly *must have AVR  

Jasic TIG Inverter Welder Trolley JIT-02

Jasic TIG Inverter Trolley The Jasic JIT-02 TIG Inverter Welder Trolley is a heavy-duty, purpose-built transport solution designed to safely move and store your Jasic TIG welding equipment. Engineered for strength, stability, and convenience, this robust trolley provides an organised, mobile platform for your Jasic TIG inverter, gas cylinder, and accessories, making it perfect for workshop or on-site use. Constructed from durable, powder-coated steel, the JIT-02 offers excellent resistance to wear and corrosion. Its compact footprint and smooth-rolling heavy-duty castors ensure effortless manoeuvrability, even in tight workspaces. Multiple shelves and a secure gas bottle holder keep your machine, cables, and consumables neatly arranged for maximum efficiency. Key Features: Strong steel frame with powder-coated finish – built for long-term durability. Optimised design for Jasic TIG inverters – perfect fit for models such as the Jasic TIG 200/315 and similar. Integrated gas cylinder holder – safe and stable storage with retaining chain. Smooth-rolling heavy-duty castors – easy movement around the workshop. Compact footprint – maximises workspace without sacrificing storage capacity. Whether in a fabrication shop, industrial setting, or maintenance environment, the Jasic JIT-02 TIG Inverter Welder Trolley provides the strength and mobility needed to keep your welding setup secure, organised, and ready for action.

Jasic EVO MIG 350S Multi Process Separate Air

Jasic EVO MIG 350S Multi Process Separate Air Cooled Built to perform in the most demanding environments, the Jasic EVO MIG 350S Separate combines rugged industrial design with advanced digital control for a truly professional welding experience. Powered by ARM and DSP dual microprocessors, the machine adapts in real time to deliver a smooth, stable arc with exceptional precision, no matter the process. The separate wire feed unit is engineered for efficiency, featuring a ClearVision HD digital display with rotary encoders for effortless adjustment of every parameter. Even in challenging workshop conditions, settings remain easy to see and quick to control. With synergic MIG/MAG, MMA, and DC Lift-TIG capabilities, the EVO MIG 350S offers complete versatility. The dual drive wire feeder with precision 37.45mm rollers ensures consistent wire delivery, while advanced features such as crater fill, program memory storage, and Welding Engineers Mode give you full command of every weld. Efficiency is built in. The Smart Fan system runs only when required, reducing noise and dust intake, while auto sleep mode lowers idle consumption to less than 10W. Generator-friendly operation and IP23S protection mean this machine is just as reliable on site as it is in the workshop. Connectivity is equally flexible, with options for wired, wireless, and mobile app control, plus a USB Type-C port for software updates and device charging. Backed by Jasic’s industry-leading 5-year warranty, the EVO MIG 350S delivers the performance, reliability, and confidence professionals demand. What’s included in the Kit: 4 roll feed unit Trolley MIG Torch 4m Interconnections 5m Regulator Gas Hose & Earth Lead 3m Storage Toolbox Why we love the EVO MIG 350S Multi Process Separate Air Cooled Rugged, ergonomic design  Advanced inverter technology with ARM and DSP digital microprocessor control  Separate wire feed unit with ClearVision digital display and full parameter control  ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment  2T/4T/Cycle and Spot trigger control  Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable  Excellent welding characteristics with enhanced droplet transfer  Crater fill setting  On demand cooling and auto sleep mode ensures market leading energy efficiency with idle power consumption of less than 10W  Key power electronic component protection  Standard MIG, Push Pull or Spool Gun torch selection  Enhanced dual drive wire feeder with 37.45mm rollers  Program memory storage (10 per process)  Welding Engineers Mode for default parameter selection  IP23S protection class rating  Flexible remote control solutions including wired, wireless and mobile app control  USB Type-C port for software updates and device charging  Generator friendly *must have AVR 

Jasic Evo MIG 350CT Inverter MIG Welder

Jasic EVO MIG 350 CT Inverter Welder The design of the Jasic EVO MIG 350 CT Inverter is both rugged and ergonomically designed for professionals who demand precision without compromise. The 350 CT is powered by an ARM and DSP dual microprocessor system that instantly adapts to every moment of the weld. It regulates the arc output in real-time, even as conditions change. The digital display is slanted at 45° for improved visibility and an enhanced viewing area. Visible under direct sunlight, offering a clear reading all the time. Intelligent Synergic Control is built in, making setup for welds easier. Enter some basic information, and the welder will take care of the rest, selecting the optimal settings every time. It also comes fitted with Overheat and Overcurrent protection, which protect the machine from overheating and from the current getting too high. The machine will automatically switch off and reset, protecting the machine and the weld. Designed with today’s workshop in mind, the EVO MIG 350 sets a new standard for efficiency. Its smart cooling system only runs when needed, and the auto sleep mode cuts power use down to under 10W when idle. You’re in full control wherever you are, thanks to flexible remote options – whether that’s wired, wireless, or through the mobile app. A USB-C port makes it easy to keep the machine updated and your devices charged, while built-in program memory and generator-ready operation mean the welder is just as reliable on site as it is in the workshop. What’s Included in the Kit: EVO MIG 350 CT Welder Trolley MIG Torch 4m Regulator Hose Earth Lead Why We Love the Jasic EVO MIG 350 CT Inverter Welder: Rugged, ergonomic design  Advanced inverter technology with ARM and DSP digital microprocessor control  ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment  2T/4T/Cycle and Spot trigger control  Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable  Excellent welding characteristics with enhanced droplet transfer  Crater fill setting  On-demand cooling and auto sleep mode ensure market-leading energy efficiency with idle power consumption of less than 10W Key power electronic component protection  Standard MIG, Push Pull or Spool Gun torch selection  Enhanced dual drive wire feeder with 37.45mm rollers  Program memory storage  Welding Engineers Mode for default parameter selection  IP23S protection class rating  Flexible remote control solutions including wired, wireless and mobile app control  USB Type-C port for software updates and device charging  Generator friendly *must have AVR   

Jasic EVO MIG 500S Air-Cooled MIG Welder Package With 5Mtr Intercons

Jasic EVO MIG 500S Multi Process Separate Air Cooled c/w 5m Interconnection Cable Transform your welding projects with the EVO MIG 500, a professional-grade industrial welding machine that delivers precision, power, and peace of mind in one rugged package. Whether you're tackling heavy industrial fabrication or intricate metalwork, this advanced welder adapts to your needs with its intelligent ARM and DSP digital microprocessor control, ensuring flawless welds every time.  The separate wire feed unit features a crystal-clear ClearVision HD digital display with intuitive rotary encoders, making parameter adjustments effortless even in demanding work environments. From synergic MIG/MAG to MMA and DC Lift-TIG capabilities, you'll switch between welding processes seamlessly while the enhanced dual drive wire feeder with precision 37.45mm rollers guarantees smooth, consistent wire delivery. Built to withstand the toughest job sites with IP23S protection and designed for maximum efficiency with less than 10W idle power consumption, the EVO MIG 500 Separate keeps your productivity high and operating costs low.  Control your welding experience your way—whether through wired, wireless, or mobile app connectivity—and rest easy knowing your investment is protected by an industry-leading 5-year warranty that speaks to the uncompromising quality and reliability built into every machine. Key Features Rugged, ergonomic design  Advanced inverter technology with ARM and DSP digital microprocessor control  Separate wire feed unit with ClearVision digital display and complete parameter control  ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment  2T/4T/Cycle and Spot trigger control  Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable  Excellent welding characteristics with enhanced droplet transfer  Crater fill setting  On-demand cooling and auto sleep mode ensure market-leading energy efficiency with idle power consumption of less than 10W  Key power electronic component protection  Standard MIG, Push Pull or Spool Gun torch selection  Enhanced dual drive wire feeder with 37.45mm rollers  Program memory storage (10 per process) Welding Engineers Mode for default parameter selection  IP23S protection class rating  Flexible remote control solutions, including wired, wireless and mobile app control  USB Type-C port for software updates and device charging  Generator friendly *must have AVR  Package Includes:  MIG/Multi Process Inverter Power Source Dual Drive Wire Feed Unit (4 Roll) Interconnections 5m Trolley Integrated Toolbox Hard Core MIG Torch 4m Feedrolls Regulator Gas Hose & Earth Lead

Jasic EVO MIG 500S Watercooled Seperate Wire Feeder MIG Welder Package

Jasic EVO MIG 500S Multi Process Separate Water Cooled Package - 5m Interconnecting Cable Transform your welding capabilities with the EVO MIG 500 Separate Water Cooled, a professional-grade welder engineered for those who demand precision and reliability in their craft. This powerhouse combines rugged durability with cutting-edge technology, featuring advanced inverter control powered by ARM and DSP digital microprocessors that deliver consistently superior welding performance across MIG/MAG, MMA, and DC Lift-TIG applications. Master Every Weld with Intelligent Control The separate wire feed unit equipped with ClearVision HD digital display puts total parameter control at your fingertips. Hollow rotary shaft encoders allow for precise adjustments, while the intuitive 2T/4T/Cycle and Spot trigger control adapts to your welding style. Whether you're working on delicate fabrication or heavy industrial projects, the synergic and manual modes ensure optimal droplet transfer and exceptional bead quality every time. Built for the Long Haul Water-cooled technology keeps your welding gun operating at peak performance during extended sessions, while the enhanced dual drive wire feeder with 37.45mm rollers handles even the most demanding materials with ease. The IP23S protection rating and key component protection safeguard your investment, backed by an industry-leading 5-year warranty for complete peace of mind. Efficiency That Works as Hard as You Do Smart features like on-demand cooling and auto sleep mode deliver market-leading energy efficiency, consuming less than 10W in idle mode—keeping your operating costs low without compromising performance. The Welding Engineers Mode provides instant access to proven parameter settings, while program memory storage saves your custom configurations for consistent results across multiple projects. Connected Control, Anywhere Take command with flexible remote control options including wired, wireless, and mobile app connectivity. The USB Type-C port enables seamless software updates and device charging, while generator-friendly operation (with AVR) ensures reliable performance wherever your work takes you. Package Includes:  MIG/Multi Process Inverter Power Source Dual Drive Wire Feed Unit (4 Roll) Interconnections 5m Trolley Water Cooler Hard Core Water Cooled MIG Torch 4m Feedrolls Regulator Gas Hose & Earth Lead

Electrode Holder And 4Mtr Cable With Twist Lock Conector

200A Electrode Holder With Lead And Twist Lock Connector 

ESAB Welding Rod Drying Oven PSE-5 230V

ESAB Welding Rod Drying Oven PSE-5 230V In welding, electrode integrity is everything. Even slight moisture absorption can cause porosity, cracking, and weakened welds. The ESAB PSE-5 Portable Electrode Oven provides the perfect solution — a durable, high-performance oven designed to keep your welding electrodes dry, stable, and ready for flawless results. Engineered for precision and portability, the PSE-5 maintains a consistent internal temperature, preventing moisture reabsorption and ensuring that low-hydrogen electrodes stay in optimal condition. Its compact and lightweight design makes it ideal for on-site work, field operations, and construction environments, where reliability and mobility are essential. Built to handle the demands of daily use, the PSE-5 features a robust heating element and precise temperature control system, delivering even, efficient heat distribution across all electrode types. Durable insulation reduces heat loss and maximises energy efficiency, while the rugged outer casing protects against wear and tear in challenging conditions. Whether you’re working on structural steel, pipelines, shipbuilding, or general fabrication, the ESAB PSE-5 helps you achieve consistent, high-quality welds by ensuring your electrodes are always in peak condition. Key Features Portable & Lightweight Design – Easy to carry, ideal for on-site welding and field applications. Precise Temperature Control – Maintains optimal storage temperature to prevent moisture absorption. Robust Heating Element – Ensures consistent and reliable heating performance. Durable Construction – Built to endure harsh industrial environments and daily use. Efficient Insulation – Minimises heat loss and improves energy efficiency. Secure Locking Mechanism – Prevents accidental opening during transport. 5 kg Capacity – Suitable for a variety of welding electrodes. Indicator Lights – Provide clear visual feedback on power and heating status. Low-Hydrogen Compatible – Perfect for critical welding applications where precision matters. AC Power Operation – Designed for compatibility with standard electrical outlets. Applications Construction & Infrastructure Projects – Maintain electrode quality across large job sites. Pipeline Welding – Reliable performance in demanding field conditions. Shipbuilding & Repair – Prevent moisture-related weld defects in marine environments. Structural Steel Fabrication – Achieve strong, defect-free welds in fabrication shops. On-Site Welding & Repairs – Portable and efficient for quick, high-quality fixes. General Welding Applications – Keep electrodes dry and consistent for any project. Oil & Gas Industries – Ensure weld integrity in high-pressure environments. Aerospace Welding – Maintain strict moisture control for critical weld performance. Please note: This item is a special order item that needs to be ordered from the manufacturer.

ESAB Welding Rod Drying Oven PSE-10 230V

ESAB PSE-10 Portable Electrode Oven – Reliable Moisture Control for Quality Welds Maintain the integrity and strength of your welds with the ESAB PSE-10 Portable Electrode Oven. Built for professionals who demand precision and durability, this rugged and efficient oven keeps your welding electrodes at the perfect temperature — preventing moisture absorption that can lead to porosity, cracking, and other weld defects. Ideal for fieldwork, construction sites, and remote welding operations, the PSE-10 delivers consistent, uniform heating to ensure your electrodes are always ready for use. Whether working with low-hydrogen electrodes, stainless steel, or specialised alloys, you can rely on the ESAB PSE-10 to maintain peak electrode performance for stronger, more reliable welds. Compact, durable, and easy to use, this portable oven combines industrial-grade insulation with precise temperature control for efficient operation and lasting performance — wherever the job takes you. Key Features Portable & Rugged Design – Built for on-site and field use, with a durable casing for easy transport and longevity. Precise Temperature Control – Maintains optimal electrode-drying temperatures to prevent moisture absorption and preserve weld quality. Uniform Heating System – Ensures even temperature distribution across all electrodes, eliminating hot or cold spots. High Capacity – Holds up to 10 kg of welding electrodes, ideal for projects of all sizes. Durable Construction – Engineered to withstand demanding industrial environments for dependable performance. Efficient Insulation – Minimises heat loss while maximising energy efficiency. Easy-to-Use Controls – Simple setup and quick temperature adjustment for ease of operation. Moisture Prevention Technology – Keeps electrodes dry, conditioned, and ready for critical welds. Standards-Compliant – Meets industry requirements for safety and professional welding performance. Applications On-site welding and field repairs Construction and structural steel fabrication Pipeline welding and maintenance Shipbuilding and offshore work General fabrication workshops Industrial maintenance and repair Welding rod storage and conditioning for moisture-sensitive applications Please note: This item is a special order item that needs to be ordered from the manufacturer.

Jasic EVO TIG 320P AC/DC Water Cooled Package

Jasic EVO TIG 320P AC/DC Water Cooled Package The EVO TIG 320P AC/DC Water-Cooled redefines precision and versatility for welding professionals who demand the best. Whether you're tackling complex AC welding applications or seeking flawless results in DC modes, this state-of-the-art TIG welder is your ultimate companion. With its revolutionary multi and hybrid-wave control technology, you have unparalleled flexibility to handle any job with ease. Equipped with digital control, the EVO TIG 320P simplifies setup and operation, aided by its program memory storage that allows you to save your go-to settings for repeat jobs. Its ClearVision digital display and intuitive interface make navigating its features, like easy-set welding parameters and auto tungsten tip shaping, a seamless experience—even for intricate work. Meanwhile, the device's Dash-Arc technology ensures a virtually perfect arc strike rate of 99% or better. Versatility doesn’t stop there. The EVO TIG 320P supports MMA welding with advanced features like Hot Start, Anti-Stick, and Arc Force control, while the LC-40 Water Cooler ensures top-tier performance and reliability for extended projects. Its Smart Gas technology calculates optimal post-flow gas timing automatically, keeping costs and waste to a minimum. Flexible control options, including wired, wireless, and mobile app control, mean you’re always in command, no matter where the work takes you. Built with portability and efficiency in mind, the EVO TIG 320P comes with a robust trolley, intelligent fan and cooler control and auto sleep mode, delivering industry-leading energy savings. Plus, it’s an AVR generator-friendly for full compatibility in varied work environments. Every purchase is backed by a comprehensive 5-year warranty, guaranteeing peace of mind. From professional workshops to on-site applications, the EVO TIG 320P AC/DC offers unmatched precision, usability, and reliability to enhance your craftsmanship and workflow. Key Features TIG AC/DC Pulse with digital control Program memory storage Multi and hybrid-wave control technology offers ultimate flexibility for any AC welding application Microprocessor control of a wide range of functions HF and lift TIG VRD function Auto tungsten tip shaping simplifies tungsten preparation and ensures consistent AC arc start performance ClearVision digital display with hollow rotary shaft encoder Intelligent fan and cooler control Excellent welding characteristics AVR generator friendly 2T/4T/Cycle and Spot trigger control Dash-Arc technology – ensures 99+% arc striking success rate Smart Gas technology automatically calculates the optimum post-flow gas time MMA welding with Hot Start, Anti-Stick and Arc Force control Assisted spot welding mode Flexible remote control solutions, including wired, wireless and mobile app control Easy-Set – Simplifies welding parameter settings LC-40 Water cooler with enhanced usability and reliability Auto sleep mode with industry-leading energy efficiency Package Includes: EVO 320P AC/DC Inverter Water Cooler Trolley TIG Torch Earth Return Lead Gas Hose Regulator Flowmeter  

Jasic EVO TIG 320P AC/DC Package

Jasic EVO TIG 320P AC/DC Package The EVO TIG 320P AC/DC redefines precision and versatility for welding professionals who demand the best. Whether you're tackling complex AC welding applications or seeking flawless results in DC modes, this state-of-the-art TIG welder is your ultimate companion. With its revolutionary multi and hybrid-wave control technology, you have unparalleled flexibility to handle any job with ease. Equipped with digital control, the EVO TIG 320P simplifies setup and operation, aided by its program memory storage that allows you to save your go-to settings for repeat jobs. Its ClearVision digital display and intuitive interface make navigating its features, like easy-set welding parameters and auto tungsten tip shaping, a seamless experience—even for intricate work. Meanwhile, the device's Dash-Arc technology ensures a virtually perfect arc strike rate of 99% or better. Versatility doesn’t stop there. The EVO TIG 320P supports MMA welding with advanced features like Hot Start, Anti-Stick, and Arc Force control, while the optional LC-40 Water Cooler ensures top-tier performance and reliability for extended projects. Its Smart Gas technology calculates optimal post-flow gas timing automatically, keeping costs and waste to a minimum. Flexible control options, including wired, wireless, and mobile app control, mean you’re always in command, no matter where the work takes you. Built with efficiency in mind, the EVO TIG 320P comes with intelligent fan and cooler control and auto sleep mode, delivering industry-leading energy savings. Plus, it’s AVR generator friendly for full compatibility in varied work environments. Every purchase is backed by a comprehensive 5-year warranty, guaranteeing peace of mind. From professional workshops to on-site applications, the EVO TIG 320P AC/DC offers unmatched precision, usability, and reliability to enhance your craftsmanship and workflow. Package Includes: EVO 320P AC/DC Inverter,   TIG Torch, Earth Return Lead, Gas Hose, Regulator Flowmeter

Jasic Evo Power MIG 160 MIG Welder Package

Jasic EVO Power MIG 160 Welder Take your welding projects to the next level with the Power MIG 160. Designed with precision, durability, and convenience in mind, this rugged and ergonomic machine is built to perform under the toughest conditions. Whether you're an experienced fabricator or a beginner, its advanced inverter technology ensures consistent and efficient MIG and MMA performance every time. Navigate settings effortlessly with a digital display and precise parameter adjustments thanks to digital encoders. The Power MIG 160 makes every job smoother with smart features like a welding engineer mode, a quick factory reset option, and an auto sleep mode to save energy. Need to fine-tune? The variable inductance control lets you optimise settings for perfect results. Plus, the built-in LED wire feeder cabinet ensures visibility, while a handy storage slot keeps spare feedrolls organised and at your fingertips. With a Voltage Reduction Device (VRD) for extra safety MMA mode, overcurrent and overheat protection, and a fan-on-demand system, this machine is as safe as it is powerful. Whether you're tackling heavy-duty projects or precise spot welding, the Power MIG 160 delivers unparalleled control and efficiency. Built for reliability and versatility, this welding machine delivers professional results every time. What sets the Power MIG 160 apart is its industry-leading five-year warranty, giving you unmatched peace of mind while you weld with confidence. Package Includes: Power MIG 160 Inverter, MIG Torch 3m, Earth Return Lead, Gas Hose & Regulator, V Groove Feedrolls 0.6/0.8mm & 0.8/1.0mm. Key Features MIG and MMA Rugged, ergonomic design  Welding engineer mode  Consistent and efficient MIG spot welding performance  Quick factory reset; auto sleep mode  LED inside wire feeder cabinet; handy accessory storage slot  ABAP: Active Balancing Air Passage  Fan on demand  Voltage Reduction Device (VRD)  Key power electronic component protection  Overcurrent and overheat protection  Essential features for a straightforward setup  Advanced inverter technology  Digital display  Digital encoders for precise parameter adjustment  2T/4T trigger control  Variable inductance control  Gas check and wire inching buttons  IP23S ingress protection rating 

Jasic EVO TIG 300P DC Water Cooled Package

Jasic EVO TIG 300P Water Cooled Welder Introducing the NEW Jasic ET-300P – the DC Pulse TIG inverter engineered for professionals who demand uncompromising performance, flexibility and reliability. Designed with the latest in advanced inverter technology, the ET-300P delivers industry-leading energy efficiency, precision arc control, and rugged durability that stands up to the toughest welding environments. The clear vision HD digital display ensures clear visibility in any light condition, so whether you're fabricating in the workshop or tackling site work, this welder is built to keep you going. The ET-300P offers total control and flexibility with modular air- and water-cooled options available. Choose the control that suits you, with wired and wireless foot pedals, handheld remotes and even mobile app connectivity available – putting the power of precision right at your fingertips.  With a rugged and ergonomic design and an IP23S-rated casing, its intelligently designed internal structure features dust-free air passages around critical components, backed with our industry-leading 5-year no-cost warranty – giving you peace of mind and performance you can trust. Built to weld. Designed to adapt. Backed to last. Discover more and be among the first to experience the future of TIG welding. Key Features TIG DC Pulse with digital control Program memory storage Microprocessor control of a wide range of functions HF and lift TIG VRD function ClearVision digital display with hollow rotary shaft encoder Intelligent fan and cooler control Excellent welding characteristic AVR generator friendly 2T/4T/Cycle and Spot trigger control Dash-Arc technology – ensures 99+% arc striking success rate Smart Gas technology automatically calculates the optimum post flow gas time MMA welding with Hot Start, Anti-Stick and Arc Force control Assisted spot welding mode Flexible remote control solutions including wired, wireless and mobile app control Easy-Set – Simplifies welding parameter settings LC-40 Water cooler with enhanced usability and reliability Auto sleep mode with industry-leading energy efficiency

Jasic EVO TIG 300P DC Package

Jasic EVO ET 300P Pulse TIG Inverter Introducing the NEW Jasic ET-300P – the DC Pulse TIG inverter engineered for professionals who demand uncompromising performance, flexibility and reliability. Designed with the latest in advanced inverter technology, the ET-300P delivers industry-leading energy efficiency, precision arc control, and rugged durability that stands up to the toughest welding environments. The clear vision HD digital display ensures clear visibility in any light condition, so whether you're fabricating in the workshop or tackling site work, this welder is built to keep you going. The ET-300P offers total control and flexibility with modular air- and water-cooled options available. Choose the control that suits you, with wired and wireless foot pedals, hand held remotes and even mobile app connectivity available – putting the power of precision right at your fingertips.  With a rugged and ergonomic design and a IP23S rated casing, Its intelligently designed internal structure features dust-free air passages around critical components, backed with our industry leading 5 year no cost warranty – giving you peace of mind and performance you can trust. Built to weld. Designed to adapt. Backed to last. Discover more and be among the first to experience the future of TIG welding.

ESAB CarryVac 2 Main Filter Replacement

 ESAB CarryVac 2 Main Filter High-Efficiency Replacement Filter for Portable Fume Extraction Units The ESAB CarryVac 2 Main Filter is a genuine high-performance replacement filter, engineered specifically for the ESAB CarryVac 2 portable fume extraction system. Designed to ensure optimal air quality and filtration efficiency in light to medium-duty welding environments, this filter plays a vital role in protecting operators from hazardous airborne contaminants. Featuring a multi-stage high-efficiency particulate air (HEPA-class) filtration system, the CarryVac 2 filter captures fine welding fume particles—including those generated from carbon steel, stainless steel, and coated metals—with an impressive filtration efficiency of 99.9% for particles down to 0.3 microns. Its compact cartridge design allows for fast and easy filter replacement, reducing downtime while keeping your fume extraction unit running at peak performance. Ideal for workshops, fabrication bays, and mobile welding operations, this main filter ensures continued compliance with health and safety standards for air quality. Key Features: Genuine ESAB Replacement Filter – Designed for the CarryVac 2 portable fume extraction unit High Filtration Efficiency – Captures up to 99.9% of airborne particles ≥0.3 microns HEPA-Class Multi-Layer Filter Media – Ensures reliable protection from welding fumes and dust Long Service Life – Durable construction with consistent airflow performance Quick-Change Cartridge – Tool-free filter changes save time and effort Compact & Portable System Support – Maintains efficiency in mobile and stationary setups Technical Specifications: Filtration Efficiency: 99.9% Particle Size Rating: ≥ 0.3 microns Filter Type: HEPA-class (main filter, with integrated pre-filter) Air Flow Capacity: Up to 230 m³/h (approx. 135 CFM, depending on use conditions) Dimensions: Approx. 305 mm x 305 mm x 70 mm (varies slightly by batch) Weight: Approx. 1.5 kg Material: Synthetic fibre with supporting frame Compatible Unit: ESAB CarryVac 2 Portable Fume Extractor Applications: Welding of carbon steel, stainless steel, galvanised steel, and coated materials Light-to-medium duty fabrication environments Mobile welding, field service, and workshop setups Compliance with occupational health and safety standards Maintenance Tip: For optimal performance, inspect and replace filters regularly. Clogged or saturated filters can reduce airflow and system efficiency. Protect your team and keep your CarryVac 2 operating at its best with the ESAB Main Filter—a critical part of your fume extraction strategy. Please note: This item is a special order item that needs to be ordered from the manufacturer.  

ESAB RobustFeed AVS

ESAB Robust Feed Wire Feeder Built to handle the toughest welding jobs. The ESAB Robust Feed is designed for welders who need a wire feeder that can withstand heavy use and still deliver reliable results. With its enclosed, heavy-duty housing and smart ergonomic design, this unit is built for reliability, mobility, and top-quality performance in any environment – from muddy construction sites to busy fabrication shops. Key Features Tough and durable: Drop-resistant, double-walled housing built to withstand knocks, drops and harsh conditions. Easy to move: Ergonomic handles, five lifting points and crane-certified lifting capabilities make transport simple and safe. Weather-ready: IP44-rated enclosure keeps rain and dust out, while an internal heater prevents filler metal from absorbing moisture. User-friendly controls: A large, sun-readable display and a glove-friendly interface allow you to work comfortably in any conditions. Precision wire feeding: The PreciDrive system ensures smooth, accurate wire delivery for consistent weld quality. Handles solid wires up to 2.0 mm and cored wires up to 2.4 mm. Versatile setup: Use it in the field or workshop, on a trolley, with or without a wheel kit – fully compatible with Warrior power sources and accessories. Why Choose the Robust Feed? This isn’t just another feeder – it’s built for welders who need equipment as tough as they are. Whether you’re dealing with dirt, mud, rain or rough handling, the Robust Feed keeps going. Pair it with an ESAB Warrior power source for a reliable, high-performance welding solution you can count on. Please note: This item is a special order item that needs to be ordered from the manufacturer.

Wilkinson Star Kapio Laser Welding Auto-Darkening Helmet

Meet the Kapio Laser Welding System, a state-of-the-art solution designed to redefine safety, precision, and convenience for professionals in laser welding. Thoughtfully crafted with cutting-edge technology, this advanced system comes equipped with a specially designed helmet that ensures maximum protection and comfort during even the most demanding welding tasks. Engineered with a high-performance material mix, the helmet weighs just 490g, offering an ultra-lightweight design that minimises fatigue without compromising durability. Its generously sized 98 x 53mm viewing area, supported by 4 arc sensors, provides exceptional visibility and ensures seamless auto-darkening transitions with a swift switching speed of 0.2 milliseconds.  Customise your level of protection with the welding shade range (DIN 5-8 to DIN 9-13) and clear shade DIN 4, all controlled effortlessly via user-friendly soft knobs and a digital display. Take your laser welding safety to the next level and tackle any project with confidence, precision, and comfort. When it comes to laser welding, the Kapio Laser Welding System is in a league of its own.

Wilkinson Star Kapio Laser Welding Helmet Airfed PAPR Package

Meet the Kapio Laser Welding System, a state-of-the-art solution designed to redefine safety, precision, and convenience for professionals in laser welding. Thoughtfully crafted with cutting-edge technology, this advanced system comes equipped with a specially designed helmet that ensures maximum protection and comfort during even the most demanding welding tasks. Engineered with a high-performance material mix, the helmet weighs just 490g, offering an ultra-lightweight design that minimises fatigue without compromising durability. Its generously sized 98 x 53mm viewing area, supported by 4 arc sensors, provides exceptional visibility and ensures seamless auto-darkening transitions with a swift switching speed of 0.2 milliseconds.  Customise your level of protection with the welding shade range (DIN 5-8 to DIN 9-13) and clear shade DIN 4, all controlled effortlessly via user-friendly soft knobs and a digital display. Safety and comfort go hand in hand with the Kapio system. It includes the innovative Airkos® powered airflow system, delivering two adjustable airflow speeds (180 & 220 liters per minute) to keep you safe while working. The system is enhanced with intelligent safety features, such as audible and visual alarms for clogged filters and low battery warnings, ensuring uninterrupted operations. Powered by a rechargeable lithium-ion battery with up to 10 hours of runtime (with an upgrade option for up to 14 hours), Kapio guarantees reliability throughout your workday. Certified to the highest standards (ISO 16321, EN 207, and CE EN 207), the Kapio Laser Welding System ensures unmatched protection, including optical density of OD7 and a complete helmet certification range of 1000-1100 D LB6 IR LB8. Its grinding mode, exterior knob accessibility, and filtration system (PRSLTH3) further elevate its versatility, making it a perfect fit for professionals seeking efficiency without cutting corners on safety. Take your laser welding safety to the next level and tackle any project with confidence, precision, and comfort, backed by Kapio’s 1-year warranty. When it comes to laser welding, the Kapio Laser Welding System is in a league of its own. System Includes: ADF Helmet, Blower Unit and Storage Bag

Jasic LS-20000F Laser Welder c/w Dual Wire Feeder

LS-20000F Laser Welder c/w Dual Wire Feeder The Jasic LS-20000F Laser Welder is designed to redefine efficiency and precision in professional welding applications. With a welding speed up to 10x faster than traditional manual TIG welding, it significantly reduces project time while ensuring exceptional weld quality. The cutting-edge technology minimises spatter, porosity, and distortion, requiring little to no post-weld cleaning or rework, making it an indispensable tool for high-demand environments. Engineered for cost efficiency, the LS-20000F eliminates the need for extensive welding expertise, helping companies reduce reliance on highly experienced welders. Its robust pump source offers a remarkable lifespan of over 100,000 hours, ensuring nearly zero maintenance requirements and long-term reliability. Featuring an innovative industrial design, the LS-20000F offers ergonomic flexibility and ease of use, complete with a colour touchscreen control panel for intuitive operation and comprehensive job parameter settings. Its compact footprint enhances mobility and versatility, making it suitable for a wide range of industrial applications. Powered by a CW laser with over 40% electro-optical conversion efficiency, it outperforms traditional solid YAG lasers with 10x the energy efficiency, providing both eco-friendliness and cost savings. Backed by a 2-year warranty, the Jasic LS-20000F Laser Welder guarantees quality assurance and dependable performance for your welding needs.

Jasic LS-20000F 2000W Laser Welder c/w Single Wire Feeder

LS-20000F Laser Welder c/w Single Wire Feeder The Jasic LS-20000F Laser Welder is designed to redefine efficiency and precision in professional welding applications. With a welding speed up to 10x faster than traditional manual TIG welding, it significantly reduces project time while ensuring exceptional weld quality. The cutting-edge technology minimises spatter, porosity, and distortion, requiring little to no post-weld cleaning or rework, making it an indispensable tool for high-demand environments. Engineered for cost efficiency, the LS-20000F eliminates the need for extensive welding expertise, helping companies reduce reliance on highly experienced welders. Its robust pump source offers a remarkable lifespan of over 100,000 hours, ensuring nearly zero maintenance requirements and long-term reliability. Featuring an innovative industrial design, the LS-20000F offers ergonomic flexibility and ease of use, complete with a colour touchscreen control panel for intuitive operation and comprehensive job parameter settings. Its compact footprint enhances mobility and versatility, making it suitable for a wide range of industrial applications. Powered by a CW laser with over 40% electro-optical conversion efficiency, it outperforms traditional solid YAG lasers with 10x the energy efficiency, providing both eco-friendliness and cost savings. Backed by a 2-year warranty, the Jasic LS-20000F Laser Welder guarantees quality assurance and dependable performance for your welding needs.

Jasic LS-15000F Laser Welder c/w Single Wire Feeder

Jasic LS-15000F Laser Welder with Single Wire Feeder The Jasic LS-15000F Laser Welder is built for speed, accuracy, and reliability in professional welding. It works up to ten times faster than traditional TIG welding, cutting project times down dramatically while still producing a clean, precise finish. Thanks to the latest laser technology, there’s minimal spatter, porosity, or distortion, which means less time spent on cleaning and rework. One of the biggest advantages is that it doesn’t demand years of welding experience to operate. Companies can reduce their reliance on highly skilled TIG welders while still achieving excellent results. The LS-15000F is powered by a robust pump source with a lifespan of more than 100,000 hours, so it’s virtually maintenance-free and built to last. Ease of use is another strong point. A bright colour touchscreen puts all job parameters at your fingertips, while the ergonomic design and compact footprint make the machine practical to move and set up. It’s well suited for a wide range of industrial applications where space and flexibility matter. With a CW laser delivering over 40% electro-optical conversion efficiency, it’s around ten times more energy-efficient than older YAG lasers – saving money on running costs and offering a more eco-friendly option. Backed by a two-year warranty, the Jasic LS-15000F is a dependable, high-performance choice for businesses that want to weld faster, cleaner, and more efficiently. Why we love the LS-15000F Laser Welder: High Welding Efficiency Up to 10x faster than manual TIG welding. Very limited spatter, thus requiring little post-weld cleaning. Little need for rework thanks to minimal porosity, undercut or distortion. Cost Efficient Minimal welding expertise is needed, cutting down costs incurred from experienced welders. Almost 0 maintenance needed for the key component, the pump source has over 100k hours of life span. High Usability New industrial design featuring better ergonomics, flexibility and reliability. Colour touch screen control panel with an intuitive user interface. Comprehensive job parameter settings. Small footprint, excellent mobility and flexibility. High Energy Efficiency CW (continuous wave) laser with 40+% electro-optical conversion efficiency, 10x that of a solid YAG laser 2-Year Warranty Comprehensive quality assurance   In Comparison To Other Types Of Welding Technologies... Welding TechnologyArc WeldingSolid YAG LaserCW Handheld Fibre Laser Welding Experience Heat Input High Low Low Distortion High Low Low Weld Seam Processing Fillet Fillet Variable Post Weld Processing Yes Yes No Welding Speed Low Medium High Ease of Use Low High High Sustainability Hazard to people High Low Low Pollution to Environment High High Low Cost Consumables Electrode/Welding wire/Shielding gas Crystal, Xenon gas Shielding gas Energy Efficient High Low High Skill Requirement High Moderate Low Footprint Small Large Small

Jasic Evo Cut 100 Plasma Inverter Package

Jasic EVO Cut 100 3-Phase Plasma Cutter Unleash powerful cutting precision with the Jasic EVO CUT 100 (3-phase) plasma inverter, the ultimate tool for professionals who demand consistency, reliability, and efficiency. Built with a rugged ergonomic design, this inverter is crafted to withstand challenging work environments while ensuring ease of use. Its ClearVision technology guarantees excellent visibility and control for the operator, while SurePlasma technology ensures consistent arc ignition performance, even when dealing with varying torch lengths. The EVO 100 offers features like mesh cutting, 2T/4T functionality, and non-HF arc ignition, making it versatile for complex tasks. Slice through the toughest materials with precision and ease using the EVO CUT 100 Inverter. Designed to deliver clean, professional cuts, it handles carbon steel effortlessly at 30mm with speeds of up to 400mm per minute. Need heavier-duty results? The machine makes severance cuts at 40mm and pieced cuts at 22mm, tackling even the most demanding projects with accuracy. Engineered for convenience, it boasts ABAP (Active Balancing Air Passage) to dissipate internal heat, fan-on-demand, and easy postflow time settings to ensure durability and efficiency. Compatible with AVR generators and equipped with overcurrent and overheat protection, it’s ready to tackle any job site or remote project. Need software updates on the go? The integrated USB Type-C port allows for seamless upgrades and on-device charging, while the 14-pin CNC interface enables precision-driven automation. Whether you're taking on heavy-duty industrial tasks or intricate cutting jobs, the optional integrated AP-150 compressor and inverter trolley make the EVO CUT 100 truly adaptable. It’s more than just a plasma cutter; it’s a cutting-edge solution tailored for professionals who value performance and innovation. Experience unparalleled reliability with the EVO 100 Inverter, a cutting solution built to exceed expectations. Engineered for durability and long-lasting performance, this inverter comes backed with a comprehensive 5-year warranty, giving you peace of mind for years to come. Package Includes: EVO CUT 100 Plasma Inverter UPH-125 Cutting Torch (6m) Earth Clamp & Lead (3m) Package does not include plug for CNC Key Features Rugged, ergonomic design ClearVision technology HF stabilising technology SurePlasma technology for consistent arc ignition performance with different torch lengths Mesh cutting, 2T/4T, non HF arc ignition and pilot arc Gas check, postflow time setting, cutting torch length setting Generator friendly Quick factory reset; auto sleep mode ABAP: Active Balancing Air Passage Fan on demand Key power electronic component protection Overcurrent and overheat protection USB Type-C port for software updates and device charging 14 Pin CNC interface Optional integrated compressor *** Can have an optional compressor tank which bolts to the bottom of the unit  - Please enquire for the pricing on this extra ***

Jasic Evo Cut 80 Plasma Inverter Package

Jasic EVO CUT 80 (3-Phase) Plasma Inverter Unleash powerful cutting precision with the Jasic EVO CUT 80 (3-phase) plasma inverter, the ultimate tool for professionals who demand consistency, reliability, and efficiency. Built with a rugged ergonomic design, this inverter is crafted to withstand challenging work environments while ensuring ease of use. Its ClearVision technology guarantees excellent control and visibility for the operator, while SurePlasma technology ensures consistent arc ignition performance, even when dealing with varying torch lengths. The EVO 80 offers features like mesh cutting, 2T/4T functionality, and non-HF arc ignition, making it versatile for complex tasks. Slice through the toughest materials with precision and ease using the EVO CUT 80 Inverter. Designed to deliver clean, professional cuts, it handles carbon steel effortlessly at 25mm with speeds of up to 400mm per minute. Need heavier-duty results? The machine makes severance cuts at 35mm and pieced cuts at 20mm, tackling even the most demanding projects with accuracy. Engineered for convenience, it boasts ABAP (Active Balancing Air Passage) to dissipate internal heat, fan-on-demand, and easy postflow time settings to ensure durability and efficiency. Compatible with AVR generators and equipped with overcurrent and overheat protection, it’s ready to tackle any job site or remote project. Need software updates on the go? The integrated USB Type-C port allows for seamless upgrades and on-device charging, while the 14-pin CNC interface enables precision-driven automation. Whether you're taking on heavy-duty industrial tasks or intricate cutting jobs, the optional integrated AP-140 compressor and inverter trolley feature makes the EVO 80 truly adaptable. It’s more than just a plasma cutter; it’s a cutting-edge solution tailored for professionals who value performance and innovation. Experience unparalleled reliability with the EVO CUT 80 Inverter, a cutting solution built to exceed expectations. Engineered for durability and long-lasting performance, this inverter comes backed with a comprehensive 5-year warranty, giving you peace of mind for years to come. Package Includes: EVO CUT 80 Plasma Inverter UPH-125 Cutting Torch (6m) Earth Clamp & Lead (3m) Key Features Rugged, ergonomic design ClearVision technology HF stabilising technology SurePlasma technology for consistent arc ignition performance with different torch lengths Mesh cutting, 2T/4T, non-HF arc ignition and pilot arc Gas check, postflow time setting, cutting torch length setting Generator friendly Quick factory reset; auto sleep mode ABAP: Active Balancing Air Passage Fan on demand Key power electronic component protection Overcurrent and overheat protection USB Type-C port for software updates and device charging 14 Pin CNC interface

ESAB OK GoldRox E6013 Mild Steel Stick Welding Electrodes

ESAB OK GoldRox E6013 Mild Steel Electrodes – Reliable Performance, Clean Results The ESAB OK GoldRox E6013 is a premium-quality rutile-coated electrode designed for MMA (stick) welding on mild steel. It delivers consistent, clean welds with minimal spatter and superior usability, even on low open circuit voltage (OCV) machines. Whether you're welding on-site, in a fabrication shop, or tackling maintenance and repair tasks, GoldRox offers the versatility and reliability professionals demand. Key Features Excellent Arc Striking and Re-Ignition Smooth and dependable arc initiation, even with lower OCV machines such as smaller inverters or older transformers. This ensures fewer false starts and improved weld continuity. Stable Arc with Minimal Spatter Produces a steady arc that’s easy to control, reducing spatter and helping achieve a smooth weld bead with a clean finish — ideal for projects where appearance matters. Self-Releasing Slag The rutile covering allows for excellent slag detachability, often peeling off on its own. This reduces post-weld cleaning time, increases productivity, and improves weld quality. All-Position Welding Engineered for reliable performance in all positions — flat, horizontal, vertical, and overhead — giving you flexibility across a range of welding jobs and environments. Rutile Coating (E6013 Classification) The rutile-based flux coating enhances arc stability and bead appearance, while also reducing the likelihood of porosity and defects, making it a forgiving rod for newer welders but trusted by professionals. Operates on AC and DC Offers outstanding performance on both alternating current (AC) and direct current (DC±), making it compatible with virtually all welding power sources. Applications General fabrication and structural steelwork Sheet metal welding and thin material fabrication Maintenance and repair operations Light to medium construction work Agricultural and domestic welding projects DIY and home welding use Technical Details   Classification: SFA/AWS A5.1 E6013 Alloy Type: Carbon manganese Coating Type: Rutile Current Range: AC or DC± Typical Rod Diameters: 2.5mm, 3.2mm, 4.0mm Typical Operating Parameters: 2.5mm: 60–90 A 3.2mm: 90–130 A 4.0mm: 130–180 A Reposition Rate: ~0.7kg/h

ESAB Cutmaster 30+ Plasma Cutter Package 110/230V

ESAB Cutmaster 30+ Plasma Cutter – Power & Portability Combined The ESAB Cutmaster 30+ is the perfect blend of power, precision, and portability for hand-held plasma cutting. Featuring an intuitive 10.9 cm (4.3") TFT LCD screen, it provides easy access to settings and adjustments, making operation seamless. With a recommended cutting capacity of up to 10 mm and an edge-cutting capacity of 16 mm, it is designed for high-performance cutting with enhanced flexibility. Equipped with the SL60 1Torch and Cutmaster Black Series electrodes, it ensures long-lasting durability and efficiency. The automatic air pressure recognition and purging system optimises gas flow, extending consumable life while ensuring precise cuts every time. Key Features Powerful cutting performance – Cuts up to 10 mm, max edge cut 16 mm User-friendly 4.3" TFT LCD screen – Displays settings and simplifies adjustments Adjustable 2T/4T trigger lock – Enables long cuts by hand or with MechPak Automatic air pressure recognition & purging – Maintains optimal cutting pressure Comes with Cutmaster Black Series electrodes – Extended consumable life Lightweight & portable – Weighs only 11 kg, ideal for on-the-go use Robust SL60 torch – 100% duty cycle at 30A for continuous operation The ESAB Cutmaster 30+ is designed for professionals who need a compact, high-performance plasma cutter with user-friendly controls and durable components. Whether in the shop or on-site, this powerful plasma cutting package ensures clean, efficient, and precise cuts every time. Please note: This item is a special order item that needs to be ordered from the manufacturer.

ESAB Warrior 400i Water Cooled Separate MIG Welder Package With 304 Feed Unit

ESAB Warrior 400i – Heavy-Duty Multi-Process Welding System The ESAB Warrior 400i is a rugged and high-performance multi-process welding system, designed for heavy-duty industrial applications. Delivering up to 500A at 60% duty cycle, this powerhouse is built to handle MIG/MAG, MMA, and TIG welding, making it the ideal solution for fabrication, construction, and repair work. With advanced inverter technology, the Warrior 400i ensures exceptional arc performance, energy efficiency, and portability. Its durable, weatherproof enclosure allows for outdoor and indoor use, even in harsh environments. The intuitive, user-friendly interface with glove-friendly controls makes setup and adjustments quick and hassle-free. Key Features High-output performance – Delivers 400A or 500A at 60% duty cycle for extended welding operations Rugged and weatherproof – Built for reliability in demanding outdoor and industrial environments Easy-to-use interface – Clear, intuitive controls with glove-friendly knobs for quick adjustments Advanced inverter technology – Provides excellent arc stability, energy savings, and lightweight portability Versatile multi-process capabilities – Supports MIG/MAG, MMA (Stick), and TIG welding Efficient energy consumption – High efficiency (88%) and power factor (0.91) reduce operating costs Compact and portable – Designed for mobility with an optional cooling unit and a 4-wheel trolley Ideal Applications Industrial fabrication Structural steelwork Heavy equipment repair Oil & gas pipelines Shipbuilding Construction Included in Delivery ESAB Warrior 400i Power Source (0465350884) Cool 2 Water Cooler (0465427880) Warrior Water Cooled Feed 304 Wire Feeder (0465250881) 4-Wheel Trolley (0349313450) 10m Water Cooled Interconnections (0459836892) TBi 511 5m Watercooled MIG Torch 5m Electrode Holder Earth Clamp & Lead   The ESAB Warrior 400i is a high-performance, heavy-duty welding system, offering superior durability, efficiency, and versatility for demanding industrial applications.

ESAB Fabricator EM401i Aircooled MIG Welder Package

ESAB Fabricator EM 401i Aircooled – Heavy-Duty Industrial MIG/MMA Welding Powerhouse The ESAB Fabricator EM 401i Aircooled is a high-performance, inverter-controlled welding power source, engineered to deliver exceptional reliability and efficiency for heavy-duty industrial applications. Designed for MIG/MAG and MMA (Stick) welding, this rugged system provides 400A at 60% duty cycle, making it the perfect solution for fabrication shops, manufacturing plants, and field operations. Featuring advanced inverter technology, the Fabricator EM 401i reduces energy consumption while delivering superior arc performance. With wide voltage tolerance, variable inductance control, and high power factor efficiency, it ensures stable welding output in demanding environments. Built-in large wheels and gas cylinder support make it easy to move around the workshop, while IP23-rated protection allows for both indoor and outdoor use. Key Features Heavy-duty performance – 400A @ 60% duty cycle for continuous, high-output industrial welding Energy-efficient – High power factor and low idle power reduce operating costs Rugged and reliable – Built to withstand tough industrial environments with IP23-rated protection Versatile welding – Supports MIG/MAG and MMA (Stick) welding with solid and flux-cored wires Wide voltage tolerance – Delivers stable welding performance, even in fluctuating power conditions Variable inductance control – Allows fine-tuning of arc characteristics for superior results Easy mobility – Integrated wheels, gas cylinder support, and cable management system make transport effortless Comprehensive package – Includes Fabricator Feed 304 wire feeder, air-cooled torch, earth clamp & leads Ideal Applications Heavy industrial fabrication Structural steel welding Manufacturing & repair shops Shipbuilding & construction Included in Delivery 4m Aircooled Torch (0700025251) Fabricator Wire Feed Unit (0446401881) 5Mtr Interconnection Cable  Earth Clamp & Leads   The ESAB Fabricator EM 401i Aircooled is a powerful, durable, and cost-effective solution for industrial welding applications, offering maximum productivity, efficiency, and reliability.

ESAB Rustler EM 350C Pro Synergic MIG Welder 415V - Machine Only

ESAB Rustler EM 350C PRO Synergic MIG – High-Performance Synergic Welding Solution The ESAB Rustler EM 350C PRO is a compact yet powerful welding inverter, built to handle tough industrial jobs with ease. It combines high performance with low energy consumption, making it both efficient and cost-effective. Thanks to advanced inverter technology and synergic control, you simply set the material thickness and the machine automatically adjusts the welding parameters to deliver perfectly balanced results. Whether you’re an experienced welder or just starting out, it makes achieving a quality weld simple and consistent. The Rustler EM 350C PRO is designed for everyday use in demanding environments. Its rugged, flexible housing includes handy built-in storage to keep your workspace tidy and organised. A premium 4-wheel drive wire feed system (Ø 38 mm) ensures smooth, stable wire delivery and extends the life of the components — making this a reliable choice for heavy-duty fabrication work. Key Features High Output & Duty Cycle – 350A at 40% duty cycle for MIG and 320A at 40% for MMA, ensuring sustained performance. Synergic Operation – Allows automatic parameter adjustment by selecting material thickness for optimal welds with minimal setup. 4WD Wire Feeding Mechanism – Enhanced stability and durability for longer life and smooth wire feed performance. User-Friendly Control Panel – Direct access to job settings for quick adjustments and reduced setup time. Durable & Portable Workstation – Sturdy design with integrated storage compartments for tools and accessories. Enhanced Visibility – Inspection window and internal lighting for better accuracy and reduced downtime. Optimised Arc Characteristics – Delivers smooth, stable welding with minimal spatter, reducing post-weld cleanup. Built-in MMA Mode – Provides additional flexibility for welding different base materials. IP23-Rated Enclosure – Reliable protection for indoor and outdoor use. Ideal Applications Structural Steel Fabrication Steel Erectors & Steel Service Centres General Industrial Fabrication Repair & Maintenance Agricultural Equipment Welding The ESAB Rustler EM 350C PRO Synergic MIG is the perfect solution for professionals needing power, precision, and efficiency in a compact and robust design. Please note: This item is a special order item that needs to be ordered from the manufacturer.

ESAB Rogue ES 201ip Pro MMA Stick Welder 110/230V

ESAB Rogue ES 201ip PRO MMA Welder DV – High-Performance & Portable The Rogue ES is a tough, dependable power source built for professional welders who demand performance and reliability. Using the latest high-performance power electronics and digital control technology, it delivers a precise, stable arc and consistent results every time. Rogue ES provides smooth DC (Direct Current) output, making it ideal for welding a wide range of materials — including alloyed and non-alloyed steel, stainless steel, and cast iron. Adjustable Arc Force and Hot Start settings give you complete control over your arc characteristics, while the digital microprocessor ensures exceptional accuracy and best-in-class performance across all welding parameters. The Rogue ES 181iP / 181iP PRO / 201iP PRO models support electrodes up to 4.0 mm, while the Rogue ES 151iP handles electrodes up to 3.2 mm with ease. New Pulse MMA functionality further enhances control and reduces heat input — minimising distortion on thin materials, improving out-of-position welding, and cutting down on spatter. This helps prevent common welding defects and ensures cleaner, higher-quality results. For added versatility, Rogue ES also supports TIG welding on mild and stainless steel through its LIVE TIG functionality, making it a truly all-around performer for any job. Key Features Stable Arc Performance – Ensures smooth, controlled welding with low spatter. Adjustable Hot Start – Simplifies arc ignition, even with challenging electrodes. Arc Force Control – Enhances penetration and prevents electrode sticking. Rugged & Durable Build – Fibreglass-moulded housing for impact resistance. Weather-Resistant (IP23S Rated) – Built for tough indoor and outdoor conditions. Compact & Lightweight – Weighing only 8.4 kg, with a sturdy handle and shoulder strap for easy transport. Supports Long Extension Cables – Stable performance even in remote locations. Dual-Voltage (115V/230V) – Provides flexibility and compatibility for different power sources. Three-Year Warranty – Ensures reliability and long-term performance. Please note: This item is a special order item that needs to be ordered from the manufacturer.

ESAB Rogue ES 181iP MMA Stick Welder Package 240V

ESAB Rogue ES 181iP – High-Performance & Portable MMA Welder The ESAB Rogue ES 181i is an advanced MMA welder designed to deliver precise, professional, and consistent arc performance. Equipped with next-level technology, it provides smooth, stable arcs with minimal spatter, ensuring superior weld quality across all electrode types and welding positions. Its adjustable hot start guarantees easy arc ignition, even with difficult electrodes, while the adjustable arc force enhances penetration and prevents sticking. Built for durability, the Rogue ES 181i features a rugged fiberglass-moulded housing that withstands repeated impact, making it an ideal choice for both workshop and field applications. With an IP23S rating, it is weather-resistant and suited for demanding outdoor environments. Plus, ESAB’s three-year industry-leading warranty ensures long-term reliability and peace of mind. Key Features Stable Arc Performance – Ensures smooth welding with low spatter, even on tough electrodes. Adjustable Hot Start – Simplifies arc ignition for an effortless welding experience. Arc Force Control – Improves penetration and prevents electrode sticking. Rugged & Durable Build – Fiberglass-moulded housing withstands heavy-duty use. Weather-Resistant (IP23S Rated) – Designed for both indoor and outdoor use. Lightweight & Portable – Weighs just 6.8 kg, with a sturdy handle and included shoulder strap for easy transport. Supports Long Extension Cables – Delivers stable arc performance, even in remote locations. Three-Year Warranty – Backed by ESAB’s commitment to quality and durability. The ESAB Rogue ES 181i is the perfect choice for welders who need portability, reliability, and outstanding performance in an entry-level MMA welder. Please note: This item is a special order item that needs to be ordered from the manufacturer.

ESAB Rogue ES 151iP MMA Stick Welder Package 240V

ESAB Rogue ES 151iP – Powerful & Portable MMA Welder The ESAB Rogue ES 150i is an advanced MMA welder designed to deliver precise, professional, and consistent arc performance. Engineered with next-level technology, it ensures smooth, stable arcs with minimal spatter across all electrode types and welding positions. With adjustable hot start for easy ignition and arc force control for enhanced penetration, this machine makes even the most challenging welding jobs effortless. Built for durability, the Rogue ES 150i features a robust fiberglass-moulded housing that withstands heavy impact, making it ideal for both workshop and on-site applications. With an IP23S rating, it is weather-resistant and suited for tough outdoor conditions. Plus, ESAB’s industry-leading three-year warranty guarantees long-term reliability. Key Features Stable Arc Performance – Delivers smooth welding with low spatter, even on difficult electrodes. Adjustable Hot Start – Ensures easy arc ignition, even with challenging electrodes. Arc Force Control – Improves penetration and prevents electrode sticking. Highly Durable Design – Robust fiberglass-moulded housing withstands tough conditions. Weather-Resistant (IP23S Rated) – Suitable for both indoor and outdoor use. Lightweight & Portable – Weighs just 6.8 kg, with a sturdy handle and included shoulder strap for easy transport. Works with Long Extension Cables – Ensures stable arc performance, even in remote locations. Three-Year Warranty – Backed by ESAB’s industry-leading reliability guarantee.   The ESAB Rogue ES 150i is the perfect solution for welders seeking portability, durability, and top-tier performance in an entry-level MMA welder. Please note: This item is a special order item that needs to be ordered from the manufacturer.  

ESAB Rustler EM 251C Pro MIG Welder Package

ESAB Rustler EM 251C PRO – Powerful & Efficient MIG Welding Inverter The ESAB Rustler EM 251C PRO is a compact and highly efficient MIG welding inverter, designed to handle the most common welding challenges with ease. Equipped with cutting-edge inverter technology, it offers a balance of low energy consumption and superior welding performance. Whether working with carbon steel, stainless steel, aluminium, brazing, or flux-cored wires, Rustler delivers smooth, consistent results with optimised arc programs. Built for durability, this machine features a robust housing with a flexible storage system, allowing users to store tools and accessories conveniently. Additional practical features, such as an inspection window, an internally illuminated compartment, a torch holder, and cable management, enhance efficiency and ease of use. Key Features High Performance Output – Delivers strong welding capabilities with a high-duty cycle for increased productivity. User-Friendly Interface – Intuitive control panel for quick and easy setup. Rugged & Portable Design – Durable housing with a built-in accessories storage system, making it a mobile workstation. Improved Visibility & Accessibility – Inspection window and internal lighting for reduced downtime and better wire spool management. Optimised Arc Performance – Ensures high-quality welds on a variety of materials, minimising post-weld rework. Multi-Process Capabilities – Built-in MMA welding mode for added flexibility when working with different base materials. Quick Polarity Change – Tool-less polarity adjustment on the front panel for fast switching between processes. Ideal for Applications Industrial & General Fabrication Steel Fabrication Repair & Maintenance Agricultural Equipment Welding Automotive Repairs What’s Included? Binzel-type MIG torch Earth clamp (Optional toolbox available separately, please ask for info on this!) The ESAB Rustler EM 251C PRO is designed for welders who demand reliability, efficiency, and versatility in their work. Please note: This item is a special order item that needs to be ordered from the manufacturer.

ESAB Rogue EM 180 MIG Welder Package

ESAB Rogue EM 180 – Versatile & Portable MIG Welding System The ESAB Rogue EM 180 is an inverter-based MIG welding system designed to tackle a wide range of applications, from light fabrication to repair and maintenance. With industrial-grade arc performance and advanced controls, this machine allows welders to fine-tune arc characteristics for optimal results on various materials. Weighing only 16.2 kg and operating on a 230V single-phase input, the Rogue EM 180 is both highly portable and generator-compatible, making it ideal for workshop and on-site use. Key Features Large 14-Segment Display – Provides instant feedback on voltage and wire feed speed for easy monitoring. Synergic Weld Programs – Offers a full range of welding parameters (0.5 – 8.0 mm) with single-knob control for effortless adjustments. Power Factor Correction (PFC) – Ensures a stable arc, even when using long extension cables (up to 100m), and provides resistance to power fluctuations. Rugged Industrial Design – Built for durability with multiple lift points and integrated cable management. Arc Dynamics Control – Allows fine-tuning for different materials: a crisp/stiff arc for carbon steel or a smooth/soft arc for stainless steel. Spool Gun Ready – Automatically configures settings when a spool gun is connected for seamless operation. IP23S-Rated – Suitable for both indoor and outdoor use. What’s Included? MXL 201 MIG Torch (Euro connector, 3m) Earth return cable Electrode holder Gas hose with quick connector ESAB OK AristoRod 12.50 (0.8mm, 1kg) ESAB GoldRox Electrodes (2.5mm x 350mm, 1kg) Feed Rolls (0.6/0.8 mm V – fitted) Additional Feed Rolls (0.8/0.9 mm V & 0.8/0.9 mm VK) Safety instructions The ESAB Rogue EM 180 combines performance, portability, and ease of use, making it the perfect solution for professionals and hobbyists alike. Please note: This item is a special order item that needs to be ordered from the manufacturer.  

ESAB Rebel EMP 215ic Multi-Process Welder Package 110/230V

Rebel EMP 215ic – Versatile & Portable Multi-Process Welder The Rebel™ Series Welding Machines provide 120/230V flexibility and cutting-edge welding technology in a compact, portable design. Engineered with input from professional welders, the Rebel EMP 215ic is built to handle a variety of materials—including mild steel, stainless steel, and MIG aluminium—making it a true go-anywhere, weld-anything solution. Key Features True Multi-Process Performance – Delivers top-tier results in MIG, Flux-Cored, MMA (including difficult electrodes), and Lift TIG welding. Smart MIG (sMIG) Technology – Adapts in real-time to the operator’s technique, ensuring a stable arc, high-quality welds, and improved productivity. Ideal for both experienced welders and beginners. Advanced User Interface – Large TFT display provides a clear view of welding parameters, settings, and exclusive features like an on-screen user manual and spare parts list in multiple languages. Durable & Portable Design – Industrial-grade steel construction with a five-handle roll cage for easy transport and durability. Backed by a 3-year handle-to-handle warranty. Ready-to-Weld Package – Comes fully equipped with professional-grade accessories, including a MIG torch, electrode holder, return cable kits, and more. Welding Processes SMAW/MMA (Stick) GMAW (MIG/MAG) FCAW (Flux-Cored) GTAW-DC (TIG DC) Industries Automotive Bodies Civil Construction Agricultural Equipment HVAC Light Fabrication Repair and Maintenance Training Schools What’s Included? MXL 200 MIG torch with Euro connector Electrode holder and earth return cable kits 200 mm spool of OK Aristorod 12.50 (0.8 mm wire) 4.5 m gas hose with quick connector Contact tips Drive rollers for 0.6 – 1.0 mm wire The Rebel EMP 215ic is the perfect choice for welders who need flexibility, performance, and portability—all in one machine. Please note: This item is a special order item that needs to be ordered from the manufacturer.

ESAB Rebel EMP 235ic Multi-Process Welder Package 110/230V

ESAB Rebel EMP 235ic – Versatile & Portable Multi-Process Welding Machine The Rebel EMP 235ic is the next generation in multi-process welding, delivering outstanding performance in a highly portable package. Designed for professionals who need mobility without sacrificing power, this machine stands out in its class. Whether it's MIG, TIG, or MMA welding, the EMP 235ic is built to handle demanding jobs with ease. Key Features True Multi-Process Welding – Delivers excellent results in MIG/MAG, TIG, and MMA applications. User-Friendly Interface – Multilingual TFT screen with built-in spare parts lists and welding parameter guides. Superior Portability – Weighs just 28.6 kg, features a dual-voltage system, and a four-handle roll cage for easy transport. High Performance – Supports wire sizes from 0.6 mm to 1.0 mm and flux-cored wires up to 1.2 mm, compatible with both 200 mm and 300 mm spools. Full MMA & Lift TIG Capabilities – Handles electrodes up to 4 mm, with adjustable pre/post gas flow and current ramp-up/down settings. Smart MIG Technology (sMIG) – Adapts dynamically to your welding technique for a smooth, stable arc. Simply set the wire diameter, material, and plate thickness, and start welding. Dual Gas Inlets – Separate inlets for MIG and TIG gas, allowing both to be connected simultaneously. The built-in TIG gas solenoid valve removes the need for a manual torch valve. Welding Processes SMAW/MMA (Stick) GMAW (MIG/MAG) FCAW (Flux-Cored) GTAW-DC (TIG DC) Industries Agricultural Equipment Automotive Civil Construction HVAC Industrial and General Fabrication Repair and Maintenance What's Included? MXL 270 MIG torch Electrode holder and earth return cable kits 4.5m gas hose with quick connector Contact tips Drive rollers *** Please note TIG Torch needs to be ordered separately as it is an optional extra*** The EMP 235ic is designed for welders who need power, versatility, and portability—all in one machine. Please note: This item is a special order item that needs to be ordered from the manufacturer.

ESAB Renegade ES 210i MMA Stick Welder Package

Renegade ES 210i – High-Performance MMA & TIG Welding Machine The Renegade ES 210i is a robust and portable single-phase MMA and Live TIG welding machine, designed for demanding industrial environments. Featuring a durable IP23-rated housing, this unit is built to withstand tough job site conditions. The included high-quality carrying strap with multiple lift points ensures easy transport when mobility is essential. With an integrated active Power Factor Correction (PFC) circuit, the Renegade ES 210i maintains stable performance even when used with long extension cables—up to 100 meters. This machine delivers outstanding weld quality across various electrode types, including 6010 cellulosic rods. Operators can quickly access welding parameters and memory functions for a more efficient and user-friendly experience. Key Features Rugged & Durable – IP23-rated housing for reliable indoor and outdoor operation Professional MMA Performance – Handles electrodes up to 4mm with high output power Power Factor Correction (PFC) – Ensures a steady arc, even with long mains cables (up to 100m) Optimised Arc Control – Adjustable Hot Start and Arc Force for superior welding performance Enhanced Cellulosic Welding – Built-in voltage booster for better arc stability on 6010 rods User-Friendly Interface – Easy-to-read control panel for precise settings and reduced downtime Memory Function – Three programmable settings for quick parameter recall Complete Package – Includes a 3m work lead, 3m electrode holder, and a comfortable shoulder strap Ideal for Industries Shipbuilding & Offshore Civil & Structural Construction Pipe Welding & Fabrication Maintenance & Repair Work Heavy Industry & General Fabrication Mining & Steel Erection The Renegade ES 210i combines durability, portability, and top-tier welding performance, making it a reliable choice for professional welders. Please note: This item is a special order item that needs to be ordered from the manufacturer.

ArcStar 200 HBM Petrol Welder Generator Site Ready Package

  The ArcStar 200 HBM Petrol Welder is a high-performance, portable welding machine designed for professional welders who need reliability and power on the go. With its robust petrol engine and 200A welding output, this welder is perfect for outdoor and remote welding applications, delivering consistent and stable arc performance. Key Features: ✅ Powerful 200A Output: Delivers smooth and stable welding performance for a variety of applications.✅ Petrol Engine Driven: Provides independence from mains power, making it ideal for on-site and remote locations.✅ Dual Functionality: Acts as both a welder and a generator, offering added versatility on the job.✅ Durable & Portable: Built with a rugged frame and handles for easy transportation in tough environments.✅ Multi-Process Capability: Suitable for MMA (Stick) welding and compatible with a range of electrodes. Specifications: Model: ArcStar 200 HBM Welding Output: 200A Power Source: Petrol Engine Processes: MMA (Stick) Welding Portability: Compact and easy to transport The ArcStar 200 HBM Petrol Welder is the ideal solution for mobile welders, construction sites, and maintenance teams who need a reliable welding power source wherever they go.

3M Speedglas G5-01 TW Auto Darkening Welding Helmet

3M G5-01 TW Speedglas Auto Darkening Welding Helmet  Product Details Variable dark shade 5, 8-14 and variable dark state colors (for shades 8-14). The big, 170 x 104 mm, clear protective visor is curved, with excellent views up, down and peripherally.   Speedglas Natural Colour technology makes the filter view seem lighter, more detailed and colourful.   For more control over your comfort, the innovative G5-01 helmet duct system lets you direct the airflow to either your face, visor or somewhere in-between.   Re-configure your helmet using our many additional accessories to just the right coverage for your head, neck, and shoulders.   The slim profile and ergonomic design makes it even more lightweight and easier to go into tight welding spaces .   The G5-01 ADFs are Bluetooth enabled: with the 3M Connected Equipment app, users get access to additional functionalities, statistics and documentation.   3M™ Speedglas™ Welding Helmet G5-01, with welding filter G5-01TW, 611120   Can offer For use with 3M™ Speedglas™ Welding Filter Series G5-01 (sold separately).   To be combined with 3M™ Adflo™ Powered Air Respirator or 3M™ Versaflo™ Supplied Air Regulator System.   Get comfortable, easy to use protection during welding applications with 3M™ Speedglas™ Welding Helmet G5-01 with welding filter G5-01TW, 611120   To be combined with 3M™ Adflo™ Powered Air Respirator or 3M™ Versaflo™ Supplied Air Regulator System. Our welding helmet has a flip-up front that gives you a large, 170 x 104 mm, clear view that’s excellent for precision grinding in low-light conditions.   Welding filter viewing area 73 x 109 mm. Auto-ON/OFF.   Variable dark shade 5, 8-14 and variable dark state colors (for shades 8-14).

Rigid 461 Straight Pipe Welding Vice 200MM 40220

RIDGID Pipe Welding Vices are made of durable, performance-proven material and designed to resist strain, heat and warpage during tacking. They have machined swivel nuts and pins, which together with special chain screws, give smooth and trouble-free assemby of the vice onto pipe. Capacity: 15-200mm (1/2-8in).Weight: 7.0kg.

ESAB Arcair Slice Battery Pack 200V CE

ESAB Arcair SLICE Battery Pack 220V CE Cut, burn, or pierce virtually any metallic, non-metallic, or composite material with this versatile exothermic cutting system. Designed for mobility and ease of use, it includes everything you need to get cutting — simply connect it to standard industrial-grade oxygen to drive the exothermic reaction and clear away molten metal. Key Features Heavy-Duty Storage Case – Keeps all equipment and cutting rods organised and protected when not in use. Upgraded Torch Handle & Rubber Shield – Provides a secure, comfortable grip while protecting the operator from molten spray during piercing. Enhanced Striker Assembly – Features a slide mechanism that exposes only a small portion of the copper ignition bar at a time, significantly extending its lifespan. Battery Pack Only Improved Battery Ignition Source – Faster charging and enhanced reliability compared to previous models. Quick Recharge – Rapid recovery from a fully discharged state. Clear “Gas Gauge” Display – Provides a better visual indication of battery condition. Over-Charge Protection – Safeguards the battery for long-term performance. Industries Industrial and General Fabrication Mining Repair and Maintenance Steel Erectors Please note: This item is a special order item that needs to be ordered from the manufacturer.

ESAB Arcair Slice Complete Thermic Lancing Kit 220V

ESAB Arcair SLICE Thermic Lancing Complete Pack 220V Cut, burn, or pierce almost any metallic, non-metallic, or composite material — wherever the job takes you. This self-contained exothermic cutting system is ideal for emergency and forced entry situations where every second matters. The upgraded torch handle and rubber shield provide a better grip and added protection from molten spray during piercing. Enhanced striker assembly features a clever slide mechanism that exposes only a small section of the ignition (copper) bar at a time, significantly extending its lifespan. Improved battery box delivers several upgrades over previous models: Faster recharging from a completely drained battery A clearer, more accurate battery “gas gauge” display Built-in over-charge protection for added safety Please note: This item is a special order item that needs to be ordered from the manufacturer.

Starparts Hard Core HC300 MIG Torch Nozzle Insulator 5PK

  Hard Core HC300 Nozzle Insulator 5PK

Starparts Hard Core HC550 550A Heavy Duty Water Cooled MIG Torch 4Mtr

Hard Core HC550 550A Heavy Duty Water Cooled MIG Torch 4Mtr  Hard Core 550 Amp MIG Torch Water Cooled 3m Euro Connection Rating 550A Co2/450A Mixed Gases @ 80% Duty Cycle EN60974-7 Wire Sizes 0.8mm - 2.8mm CE UKCA

Starparts Hard Core 400A Air Cooled MIG Torch 5Mtr With Euro Connection

Hard Core 400 Amp MIG Torch Air Cooled 5m Euro Connection Rating 400A Co2/220A Mixed Gases @ 60% Duty Cycle EN60974-7 Wire Sizes 0.8mm - 2.0mm CE UKCA

Starparts Hard Core 300A Air Cooled MIG Torch 5Mtr With Euro Connection

Hard Core 300 Amp MIG Torch Air Cooled 5m Euro Connection Rating 300A Co2/220A Mixed Gases @ 60% Duty Cycle EN60974-7 Wire Sizes 0.6mm - 1.4mm CE UKCA

Starparts Hard Core 300A Air Cooled MIG Torch 4Mtr With Euro Connection

Hard Core 300 Amp MIG Torch Air Cooled 4m Euro Connection Rating 300A Co2/220A Mixed Gases @ 60% Duty Cycle EN60974-7 Wire Sizes 0.6mm - 1.4mm CE UKCA

Starparts Hard Core 400A Air Cooled MIG Torch 4Mtr With Euro Connection

Hard Core 400 Amp MIG Torch Air Cooled 3m Euro Connection Rating 400A Co2/220A Mixed Gases @ 60% Duty Cycle EN60974-7 Wire Sizes 0.8mm - 2.0mm CE UKCA

Starparts Hard Core HC300 & HC400 M8 MIG Contact Tip

Hard Core HC300 & HC400 M8 MIG Contact Tip The Hard Core HC300 & HC400 M8 MIG Contact Tip is a high-quality replacement consumable designed to deliver reliable current transfer, smooth wire feeding and consistent welding performance. Precision-manufactured for compatibility with Hard Core HC300 and HC400 MIG welding torches, this M8 threaded contact tip ensures excellent electrical conductivity and helps maintain a stable, consistent welding arc. Manufactured from premium copper alloy for superior conductivity and wear resistance, the contact tip is engineered to withstand the demands of professional fabrication, manufacturing and industrial welding applications. Its precision-machined bore promotes accurate wire alignment, reducing friction and helping to minimise wire feeding issues for improved weld quality and increased productivity. Regular replacement of contact tips is essential for maintaining optimum torch performance, reducing downtime and extending the life of other welding consumables. Features & Benefits High-quality replacement M8 MIG contact tip. Designed for Hard Core HC300 and HC400 MIG welding torches. Provides excellent electrical conductivity for consistent arc performance. Precision-machined bore for smooth and accurate wire feeding. Manufactured from premium copper alloy for durability and long service life. Helps reduce wire feed interruptions and improve weld quality. Quick and easy to replace during routine torch maintenance. Ideal for fabrication, manufacturing, maintenance and industrial welding applications. Ideal Applications MIG/MAG welding General fabrication Structural steelwork Manufacturing Maintenance and repair Production welding Engineering workshops Keep your welding torch performing at its best with the Hard Core HC300 & HC400 M8 MIG Contact Tip, delivering dependable current transfer, smooth wire feeding and consistent welding results for professional applications.  

Starparts Hard Core HC300 Conical Nozzle Screw On Gas Shroud 5PK

Hard Core HC300 Conical Nozzle Screw On Gas Shroud 5PK

Hard Core 300A Air Cooled MIG Torch 3Mtr With Euro Connection

Hard Core 300 Amp MIG Torch Air Cooled 3m Euro Connection Rating 300A Co2/220A Mixed Gases @ 60% Duty Cycle EN60974-7 Wire Sizes 0.6mm - 1.4mm CE UKCA

Starparts Hard Core HC300 MIG Torch Tip Adaptor M8

Hard Core HC300 Gas Diffuser Tip Adaptor M8

Jasic Two Wheel Trolley without Toolbox

Jasic Inverter Trolley without Toolbox The Jasic Two-Wheel Trolley (TR-02) is a durable, practical transport solution that easily supports your EVO TIG and plasma machines. Engineered specifically for the Jasic EVO TIG 200P AC/DC Water Cooled Welder (ET-200PACDC-WC) and the Jasic EVO Cut 45 Plasma Cutter with Compressor (EP-45SC), this trolley ensures a secure fit and reliable mobility in busy workshop or site environments. Featuring a sturdy two-wheel design, the TR-02 provides smooth movement and stable positioning. Built for strength and everyday professional demands, it provides a simple, streamlined platform for transporting your equipment without the added storage compartment. Ideal for welders who want a compact, no-fuss mobility solution, the TR-02 keeps your EVO machine protected, portable and ready for work whenever you are. Alternatively, take a look at the TR-01, which comes with a toolbox.

Stronghand Tools Stronghand PG114VM Pipe Pliers Large

StrongHand Large Pipe Pliers The StrongHand Large Pipe Pliers are a reliable and durable solution for securely holding pipes during various tasks. Constructed from heat-treated steel and finished with a nickel/chrome plating, these pliers are built to withstand heavy use while resisting wear and corrosion. Key Features: Secure Grip: Designed to hold pipes firmly in place for increased safety and precision. Adjustable Clamping Pressure: Easily adjust the pressure without releasing the pliers, ensuring a consistent hold throughout your work. V-Pads: Versatile pads adjust to clamp flat or round surfaces with ease. Durable Construction: Heat-treated steel and nickel/chrome plating offer long-lasting strength and reliability. Specifications: Product Code: PG114VM Length: 11" (280mm) Throat Depth: 3 1/2" (90mm) Opening Range: 1 1/2" - 2 1/2" (38-63mm) Shipping Weight: 1kg Ideal for welding, fabrication, and general pipework, the StrongHand Large Pipe Pliers provide the secure hold and durability needed for professional results.

SC PROFI Pipe Purge Bungs For 13–16mm Pipe

WALTER SCHNORRER® SC PROFI Purge Bungs with 80mm Connection for 13–16mm Pipe The WALTER SCHNORRER® SC PROFI Purge Bungs offer an innovative and efficient solution for purging pipes with an inner diameter of 13–16mm. Featuring an 80mm spacing between the bungs, this complete unit is designed for precision, reliability, and ease of use in a variety of welding applications, including TIG, MIG/MAG, and plasma welding. Product Overview: This purge bung set consists of only a few key components: Two Triple-Sealing Bungs: Ensure an airtight seal for effective gas purging, even through sharp elbows. Gas Inlet with Diffuser: Provides laminar gas flow to minimize turbulence and ensure a smooth weld. Gas Outlet: Allows atmospheric gases to be purged efficiently. Connecting Axis and Hose: Equipped with a rectus nipple for simple connection and operation. Key Features: Triple-Sealing Lips: Provide a secure seal to prevent gas leaks, ensuring efficient purging in all positions and through pipe elbows. Heat Resistance: UV- and temperature-resistant bung ends withstand up to 340°C for up to one hour. Advanced Gas Diffuser: Sintered metal diffuser ensures even gas distribution, preventing turbulence and minimizing oxygen intrusion. Cost and Time Efficiency: Short purge times reduce gas consumption, lower costs, and eliminate discoloration on weld seams. Precise Adaptation: The spring connection adapts seamlessly to the pipe bore, especially useful in tubes under 2½” with sharp elbows. Complete Unit: Easy to use and highly effective for professional pipe purging. Benefits: Airtight in all positions, even in complex configurations. Extremely short purge times for increased productivity. Seamless laminar gas flow ensures perfect welds without oxidation. Suitable for a wide range of welding processes and applications. Gas Flow Rates: Standard Applications: 10% of the internal pipe diameter. Titanium Welding: 20% of the internal pipe diameter. The WALTER SCHNORRER® SC PROFI Purge Bungs are the ideal choice for professionals looking for a reliable, efficient, and cost-effective solution for high-quality pipe purging

Starparts MMA Welding Cable Set 35MM Cable 5Mtrs Long

MMA Welding Cable Set 35MM Cable 5Mtrs Long  5Mtr Long Earth Lead With 35-50 Twist Lock Connector and Earth Clamp 5Mtr Long Twist Style Electrode Holder With 35-50 Twist Lock Connector 

Starparts MMA Welding Cable Set 35MM Cable 3Mtrs Long

MMA Welding Cable Set 35MM Cable 3Mtrs Long  3Mtr Long Earth Lead With 35-50 Twist Lock Connector and Earth Clamp 3Mtr Long Twist Style Electrode Holder With 35-50 Twist Lock Connector 

Starparts MMA Welding Cable Set 25MM Cable 5Mtrs Long

MMA Welding Cable Set 25MM Cable 5Mtrs Long  5Mtr Long Earth Lead With 35-50 Twist Lock Connector and Earth Clamp 5Mtr Long Twist Style Electrode Holder With 35-50 Twist Lock Connector 

Starparts MMA Welding Cable Set 25MM Cable 3Mtrs Long

MMA Welding Cable Set 25MM Cable 3Mtrs Long  3Mtr Long Earth Lead With 35-50 Twist Lock Connector and Earth Clamp 3Mtr Long Twist Style Electrode Holder With 35-50 Twist Lock Connector 

Jasic EPT-200 200A DC TIG Welder Package 230V

Jasic EPT-200 CD TIG Welder The Jasic EVO POWER TIG 200 PFC (EPT-200) is a DC TIG welder that handles Steel, Stainless Steel, and Titanium. It's the entry-level TIG machine in the Jasic EVO range and works great if you need a solid DC TIG welder that runs off 230V (generators included). Don't let "entry-level" fool you though—it's still packed with loads of the same parameter controls you'll find on its bigger sibling, the EVO TIG 200 PFC. Like the rest of the upgraded EVO range (which replaced the much-loved PRO series), you get a large, easy-to-read control panel wrapped in a tough shell that looks the business. You can also add optional foot controls, including a wireless pedal, if you want that extra control and freedom while welding. The ClearVision screen is a high-def LED display set at just the right angle so you can see what's going on without any eye strain. Despite all this, the machine's surprisingly light and easy to lug around. Switching between MMA and TIG mode is dead simple—just one button press and you're sorted. Comes with everything you need to get started: 4m WP26 TIG torch, earth return lead, argon regulator, protective carry case, and gas hose. Key Features: Rugged, ergonomic design Dash-Arc Smart Lift TIG Full-featured DC TIG parameters ABAP: Active Balancing Air Passage Smart gas for optimised shielding gas consumption Fan on demand Voltage Reduction Device (VRD) Key power electronic component protection Overcurrent and overheat protection Complete with protective case and TIG leads

Jasic EVO EPA-160 160A MMA Stick Welder Package 230V

Jasic Arc 160 Welding Inverter – Powerful and Versatile for MMA/Welding Professionals The Jasic Arc 160 is a high-performance inverter ideal for professionals seeking reliable, flexible welding equipment. Engineered with robust controls and smart protection features, the Arc 160 is built to deliver smooth arcs and dependable results across a range of welding tasks. Its rugged, ergonomic design houses advanced functions including anti-stick technology, adjustable hot start and arc-force settings — all designed to enhance welding quality and operational ease. With integrated protection such as a Voltage Reduction Device (VRD) for increased safety in open-circuit mode, and built-in overheat and over-current cut-out safeguards, the Arc 160 offers both power and peace of mind. The machine is further supported by its Smart Lift TIG capability (for precision arc starts with minimal tungsten tip sticking) and its Active Balancing Air Passage (ABAP) system, along with a fan-on-demand cooling setup, which helps reduce noise, save power, and extend component life. The included protective carry case and MMA leads mean you’re ready to weld right away. Key Features Rugged, ergonomic design Intelligent synergic control Smart Lift TIG Anti-stick, adjustable hot start and arc force ABAP: Active Balancing Air Passage Fan on demand Voltage Reduction Device (VRD) Key power electronic component protection Overcurrent and overheat protection Complete with protective case and MMA lead

Spot Welder Arms C/With Electrodes Bent L=107(Pair) 18MM

Arms c/w Cranked Electrodes Length: 107mm (Pair)

Tecna 2KvA Handheld Spot Welder C/W Timer 230V

Hand Operated Spot Gun 2 kVA Key Features • Lightweight professional spot gun for car body repair • Synchronous built-in electronic timer with SCR from 2 to 65 cycles • Compensation circuit starts the timer only when there is a proper passage of current which enables to perform on oxidised sheets, on surfaces with paint residues or on black sheets • All transformer are coated with F class insulation material that does not dry out and become brittle • Tests are made using 4000V • Force adjustment with scale in daN • Additional arm couplings to provide larger opening between arms • Supplied complete with 125mm arms • Large choice of arms and electrodes

Portwest P392 EAGLE FFP3 Valved Carbon Fold Flat Respirator (Pk10)

Introducing our innovative and comfortable compact folding mask, designed with 7 dynamic parts to ensure maximum facial movement and comfort. Equipped with a valve and inner foam, it provides increased comfort for the wearer while the added carbon layer effectively absorbs nuisance odours. It also includes the DOLOMITE optional clogging test for superior protection. The special flat shape and individual polybag make it easy to store and vending machine ready for ultimate convenience.   Features Activated carbon layer for improved absorption of nuisance odours, organic vapours and welding fumes 7 ergonomic points which adapt to different face shapes High performance exhalation valve to reduce heat and provide comfort when used in hot and humid conditions Flexible shape which allows the mask to be folded flat Adjustable nose bar for improved fit and reduced fogging of glasses Foam padding around the nose bridge for additional comfort Individually wrapped inside hygienic polybag Dolomite optional clogging test (D) to provide more comfortable breathing and longer lasting filtration performance Individually packed for vending machines Retail box which aids presentation for retail sales CE certified CE-CAT III     Materials PP, PU Foam, Activated Carbon

Portwest PS10 Dynamic KN Safety Glasses

Innovative, lightweight safety glasses with co-injected brow-guard for extra protection from particles, impact and glare featuring an exceptionally good, universal fit. Super flexible arms and rubber temple tips ensure non-slip fit. KN certified lens coatings ensure excellent vision. This style is 100% metal free.   Features Single wrap-around lens for exceptional eye coverage and protection KN certified lens coatings for extra durability and best vision (anti-scratch/ anti-fog) Co-injected TPE brow guard for extra protection from particles, impact and glare Soft rubber temple tips for non-slip fit Exceptionally good, universal fit Ideal fit for smaller face shapes Ultra lightweight for long uses Co-injected, dual colour and extremely flexible temples for maximum comfort Non-magnetic - nickel and ferrous free Anti-scratch high level treatment coating, certified and marked with K on the lens Anti-fog high level treatment coating, certified and marked with N on the lens Retail bag which aids presentation for retail sales Individually packed for vending machines CE certified

Weldturn NHTR-1000 Pipe Rotators

Weldturn NHTR-1000 Pipe Rotators 1-Tonne Conventional Pipe Rotator for Precision Welding Applications The Weldturn NHTR-1000 is a robust and compact set of conventional pipe rotators designed to rotate cylindrical workpieces—such as pipes, tanks, or pressure vessels—during fabrication and welding. With a load capacity of 1,000 kg (1 tonne), it offers smooth, consistent rotation and is ideal for light to medium-duty applications in workshops, fabrication shops, and on-site environments. This unit is part of Weldturn's reliable NHTR series, engineered for durability, safety, and ease of use in demanding industrial settings. Key Features 1-Tonne Load Capacity Capable of handling workpieces up to 1,000 kg in total weight (combined load across drive and idler units), making it ideal for small to medium-sized pipework and vessel sections. Conventional Wheel Adjustment Manual wheel spacing adjustment allows the operator to accommodate various pipe diameters quickly and securely. Suitable for a wide range of cylindrical components. Rubber-Tyred Wheels High-quality rubber-coated drive and idler wheels provide excellent grip, shock absorption, and reduced risk of surface damage to the workpiece during rotation. Variable Speed Control Equipped with a variable frequency drive (VFD) to offer adjustable rotation speed, ensuring optimal control during welding, surfacing, or inspection tasks. Durable Steel Construction Built from heavy-duty steel with a powder-coated finish for enhanced corrosion resistance and long service life, even in harsh working environments. Remote Pendant Control (Optional) Optional wired pendant control available for easy operator access to start/stop and speed adjustments, ensuring better process control and operator safety. Technical Specifications Model: NHTR-1000 Load Capacity: 1,000 kg (500 kg per unit) Pipe Diameter Range: Typically 100–1,000 mm* Wheel Type: Rubber-coated rollers Speed Range: Variable (VFD controlled) Power Supply: 230V or 400V, 50/60Hz (depending on configuration) Control Method: Manual controls; optional remote pendant Construction: Powder-coated steel frame Drive Unit: 1 × powered rotator Idler Unit: 1 × free-rotating support Weight (Set): Approx. 100–150 kg *Specifications may vary depending on configuration and manufacturer options. Applications Pipe and pressure vessel fabrication Tank welding and assembly Cladding and hardfacing Non-destructive testing (NDT) Rotary welding automation systems Why Choose the Weldturn NHTR-1000? Whether you're looking to improve weld consistency, reduce operator fatigue, or enhance safety during fabrication, the NHTR-1000 delivers exceptional performance in a compact, cost-effective footprint. It’s a trusted solution for workshops handling light-to-mid weight rotating applications. In Stock & Available for Immediate Delivery Supplied as a full set (1× drive + 1× idler). Optional accessories and remote controls available. For custom setups, automation packages, or bulk orders, contact our technical sales team. Technical Specification Turning Capacity – 1000kg Load Capacity – 1000kg Diameter Range – 020-700mm Control – Foot Pedal Height – 390mm Width – 470mm Length – 520mm Rotational Speed:  200 – 1500 mm/min

TIG Brush Replacement Wand 100MM Long

TIG Brush Replacement Wand 100MM Long  100 mm stainless steel wand with heat resistant insulating sleeve

TIG Brush Replacement Wand 50MM

TIG Brush Replacement Wand 50MM 50mm long replacement stainless steel wand with heat resistant insulating sleeve.

TIG Brush Replacement Red Lead With Moulded Handle 3Mtr

TIG Brush Replacement Red Lead With Moulded Handle 3Mtr Special red lead with integral moulded handle onto which the wand is fastened

TIG Brush Etch Marking Kit

  Adding a permanent etch mark to you work or infrastructure gives a range of benefits including safety instructions, security identifications and aesthetic improvements with company logos, which also enhance your branding and marketing. Stainless steel is an extremely hard material that is difficult to engrave with traditional methods. The TIG Brush etching function enables fast, easy and permanent dark or light marking on stainless steel, very economically. Set Contains 1 TIG BRUSH® Case Mini - Anthracite 1 TIG BRUSH ® Accessories Container 1 TIG BRUSH® TB-90 Black Etch Marking Fluid - 250 ml 1 TIG BRUSH ® Allowance for Bespoke Stencil  1 TIG BRUSH ® Microfibre Cloth - Blue 1 TIG BRUSH ® Etch Marking Electrode - 38 x 60 mm 1 TIG BRUSH ® Pre-Etch Surface Cleaner - 50 ml Spray 1 TIG BRUSH ® Post-Etch Surface Cleaner - 50 ml Spray 1 TIG BRUSH ® Marking Adaptor 10 TIG BRUSH ® Marking Felt Pads 38 x 60 mm 10 TIG BRUSH ® O Rings 1 TIG BRUSH ® Stencil Positioning Tape - Blue

Welder Earth Lead 35MM Cable With A 350A Clamp

Welder Earth Lead 35MM Cable With A 350A Clamp 35mm PVC Earth cable with a 350A sprung earth clamp and 35-50 twist lock plug  will suit welders upto 350A

Starparts Welder Earth Lead 25MM Cable With 200A Clamp

Welder Earth Lead 25MM Cable With 200A Clamp 25mm PVC earth cable with a 200A rated sprung earth clamp and 35-50 twist lock connector  Suitable for all welders up to 200Amp

Jasic Evo Wired Foot Pedal For ET-200P & ET-200PACDC TIG Welders

Jasic EVO 2.0 FRC-01 Wired Foot Pedal Control The Jasic EVO Wired Foot Pedal is ideally suited to EVO MIG and TIG welders. It comes with a 5-metre cable and a 9-pin plug, ready to connect to your machine. The foot pedal lets you control the amperage during welding, which is especially useful when TIG welding with Aluminium, as it allows you to depress the pedal at the start of the weld to deliver more amperage to create the weld pool. The operator can then decrease the power near the end of the weld, which can also help prevent weak points in the weld. Pedal fits the following EVO Models: TIG Welders: Jasic EVO TIG 200 PFC Jasic EVO TIG 200P PFC Jasic EVO TIG 200P ACDC MIG welders: Jasic EVO MIG EM-160C Jasic EVO MIG EM-200C Jasic EVO MIG EM-200CT Jasic EVO MIG EM-250CT Kit Contains: Jasic EVO FRC-01 Wired Foot Pedal 5-Metre 9-Pin Wired Plug

Taylor Stud Welding CD Chuck

Taylor Stud Welding CD Chuck  Taylor Studwelding is a leading UK supplier of stud welding chucks for the Capacitor Discharge stud welding process. CD welding chucks (also known as collets, mandrils, or simply stud holders) are essential accessories that are inserted into the end of a stud welding gun to hold the stud before and during application. With effective use and maintenance, each collet can last for over 1000 uses, providing a fantastic return on investment for industrial operations.

Taylor CDM10 Stud Welder Package C/W Gun

Taylor CDM10 Stud Welder Package C/W Gun The CDM capacitor discharge stud welding machines range is both highly cost-effective and reliable, providing powerful welding action that is fast and accurate. These robustly manufactured yet lightweight machines weld rapidly and recharge quickly, improving your workplace efficiency and profit margins. By combining power and portability, these CD stud welding controllers are top of the market for many industries, providing welds that really last while weighing as little as 16 kilograms. CDM capacitor discharge stud welding machines can weld CD studs from 2mm up to 10mm in diameter, including studs made from mild steel, stainless steel, aluminium, and brass, all of which are available from our CD studs catalogue. Suitable materials to weld using these machines include mild and stainless steels, aluminium, and Zintec (zinc-coated mild steel). CD stud welding is ideal for thin gauge parent materials that are flat and clean, achieving flawless and strong welds with minimal marking. The improved strength provided by the welded joint between stud and sheet makes stud welding a truly superior process for fixing and fastening. The CDM range is all CE and UKCA marked. CDM Stud Welding Range Features Compact, lightweight portable machine. Strong, robust construction. Rapid welding action reduces weld time. Super fast recharge time improves profitability. Easy adjustment of capacitor voltage. LED displays allow easy monitoring of functions. Quality and reliability from Taylor Studwelding Systems Limited. Welds Mild Steel, Stainless Steel, Aluminium and Brass.

Taylor CDM9 Stud Welder Package C/W Gun

Taylor CDM9 Stud Welder Package C/W Gun The CDM capacitor discharge stud welding machines range is both highly cost-effective and reliable, providing powerful welding action that is fast and accurate. These robustly manufactured yet lightweight machines weld rapidly and recharge quickly, improving your workplace efficiency and profit margins. By combining power and portability, these CD stud welding controllers are top of the market for many industries, providing welds that really last while weighing as little as 16 kilograms. CDM capacitor discharge stud welding machines can weld CD studs from 2mm up to 10mm in diameter, including studs made from mild steel, stainless steel, aluminium, and brass, all of which are available from our CD studs catalogue. Suitable materials to weld using these machines include mild and stainless steels, aluminium, and Zintec (zinc-coated mild steel). CD stud welding is ideal for thin gauge parent materials that are flat and clean, achieving flawless and strong welds with minimal marking. The improved strength provided by the welded joint between stud and sheet makes stud welding a truly superior process for fixing and fastening. The CDM range is all CE and UKCA marked. CDM Stud Welding Range Features Compact, lightweight portable machine. Strong, robust construction. Rapid welding action reduces weld time. Super fast recharge time improves profitability. Easy adjustment of capacitor voltage. LED displays allow easy monitoring of functions. Quality and reliability from Taylor Studwelding Systems Limited. Welds Mild Steel, Stainless Steel, Aluminium and Brass.

Jasic Evolve MIG 200P Multi-Purpose Pulse Inverter Welder MIG/TIG/ARC

EVOLVE 200 Multi Process Inverter Welder The EVOLVE 200 Multi Process Inverter is a next-generation, fully digital welding platform designed for modern fabrication environments where flexibility, control and future-proof technology matter. Ideally suited to light industrial fabrication, this powerful yet compact machine delivers outstanding MIG, TIG and MMA performance, backed by advanced digital control and cloud connectivity. At its core, the EVOLVE 200 features an ARM Cortex-M4 microprocessor with full digital HMI, enabling highly precise arc control across single and double pulse synergic MIG, high-frequency DC pulse TIG, and MMA welding modes. With over 100 synergic programs and 100 job memory slots, setup is fast and repeatable—simply select your material, wire size and gas, and the machine automatically optimises the parameters for consistent, high-quality welds. The integrated 4-roll wire feed system ensures smooth, reliable wire delivery, while the supplied Hard Core MIG torch with 4-button digital control allows real-time adjustment of welding parameters directly from the torch. Features such as inductance control, GLICK heat trim function, 2T/4T/Spot trigger modes and single or double pulse MIG provide exceptional control over heat input, arc behaviour and bead appearance—making it ideal for thin materials such as aluminium as well as more demanding steel applications. Designed with efficiency and longevity in mind, the EVOLVE 200 incorporates Active Balancing Air Passage (ABAP) cooling, fan-on-demand operation, IP23S protection and generator compatibility (AVR required). On-demand smart cooling reduces noise, energy consumption and internal contamination, helping extend machine life in workshop and site conditions. Connectivity sets the EVOLVE range apart. With built-in Wi-Fi and app control, users can adjust parameters remotely, manage multiple machines, and receive over-the-air firmware updates to keep the machine evolving alongside changing welding requirements. Optional accessories such as a foot control unit further expand capability, while the modular EVOLVE ecosystem supports future expansion. Powerful, intelligent and built to adapt, the EVOLVE 200 delivers professional multi-process welding performance with the digital control and connectivity demanded by today’s fabrication industry. Key Features Single and double pulse synergic MIG High frequency LIFT DC pulse TIG Hard Core MIG Torch with 4-button digital control MMA mode 4 roll wire feeder Wi-Fi-enabled firmware updates App control Digital control MIG torch 100+ synergic programs 100 job memory storage 2T/4T Spot trigger control IP23S On-demand cooling ABAP: Active Balancing Air Passage Fan on demand Ideally suited for light industrial fabrication work Generator friendly * must have AVR

Starparts 35mm2 Earth Cable With 35-50 Cable Plug And 400A Earth Clamp

35mm² Earth Cable with 35-50 Twist Lock Plug & 400A Earth Clamp This heavy-duty 35mm² Earth Cable Assembly is designed for reliable current transfer and secure grounding in demanding welding applications. Supplied complete with a 35-50 twist lock plug and robust 400A earth clamp, this ready-to-use assembly delivers excellent conductivity, durability, and performance for MIG, TIG, MMA, and plasma welding systems. Manufactured using high-quality flexible copper cable, the assembly offers superior current carrying capacity while remaining easy to handle around the workshop or site environment. The strong 400A earth clamp ensures a secure connection to the workpiece, helping maintain stable arc performance and reducing electrical resistance during operation. Ideal for professional fabrication, industrial welding, automotive repair, and general workshop use. Key Features Heavy-duty 35mm² welding earth cable assembly Supplied with 35-50 twist lock plug fitted Includes robust 400A earth clamp High-conductivity flexible copper cable Durable construction for workshop and site use Provides stable and reliable grounding connection Suitable for MIG, TIG, MMA/Stick, and plasma welding equipment Ready to use Specifications Cable Size: 35mm² Connector Type: 35-50 Twist Lock Plug Earth Clamp Rating: 400A Application: Welding earth/return lead Cable Type: Flexible copper welding cable Applications   Suitable for professional and industrial welding applications including fabrication, maintenance, automotive, agricultural, and general engineering work.

Rotabroach Cutting Coumpound Paste 500G Tub

Rotabroach Cutting Coumpound Paste 500G Tub   Prolong the life of your cutting tools and speed up cutting time with the paste from Rotabroach 

Rotabroach Cutting Lubricant Fluid 5Ltr

Rotabroach Cutting Lubricant Fluid 5Ltr Rotabroach cutting fluid and lubricants have been formulated to ensure you get the most out of your cutters.  

Rotabroach Cutting Fluid 1Ltr

Rotabroach Cutting Oil 1Ltr Elevate your cutting performance with Rotabroach Cutting Oil, designed to reduce tool wear and extend the life of your tools. Its advanced cooling properties effectively dissipate heat, preventing overheating and ensuring your tools last longer. Spend less time on tool replacements and more time on your projects. Key Features: Optimized Cutting Efficiency: RD208 cutting oil enhances cutting performance by reducing friction and heat, resulting in smoother and more accurate cuts. Exceptional Lubrication: This cutting fluid provides outstanding lubrication, enabling cutting tools to glide seamlessly through a variety of materials. Extended Tool Lifespan: By minimizing tool wear and efficiently dissipating heat, RD208 cutting oil prolongs the life of your cutting tools, reducing downtime and the need for replacements. Versatile Use: Ideal for a broad range of materials including steel, stainless steel, aluminum, and more, making it perfect for diverse drilling and cutting tasks. Cleaner Workspace: The specialized formula of RD208 cutting oil effectively flushes away chips and debris, maintaining a cleaner work environment and ensuring uninterrupted operation. User-Friendly Application: Packaged for convenience, the cutting oil comes with an applicator for precise and easy application, minimizing waste and mess. Flexible Application Methods: Suitable for direct application to the cutting area, or with a spray bottle or lubrication system, providing versatility in how it's used

Starparts Gas Hose Tail 3/8" BSP Nut To 1/4" Hosetail

Gas Hose Tail – 3/8″ BSP Nut to 1/4″ Hosetail This high‑quality gas hose tail adaptor provides a secure connection from a 3/8″ BSP female threaded gas fitting to a 1/4″ hosetail — ideal for welding gas systems requiring step‑down connections. Precision machined for reliable sealing and durability, it’s a versatile and essential component for professional gas‑shielded welding setups. Key Features & Benefits 3/8″ BSP nut to 1/4″ hosetail — standard sizing for smooth transition between threaded fittings and hose Leak‑resistant connection — precision threads and hosetail profile ensure tight sealing Rugged construction — built to withstand workshop environments and repeated use Multi‑application — suitable for TIG, MIG, plasma and general gas delivery systems Applications Used to connect gas hoses to regulators, gas mixers, welding machines or other components where a 3/8″ BSP female thread must interface with a 1/4″ flexible hose. Ideal for routing gas lines in tight spaces or where hose reductions are needed. Compatibility Fits welding gas systems and accessories that use standard 3/8″ BSP threaded gas ports and 1/4″ internal diameter gas hose.

Starparts Gas Hose Tail 3/8" BSP Nut To 3/8" BSP Hosetail

Gas Hose Tail – 3/8″ BSP Nut to 3/8″ BSP Hosetail This robust 3/8″ BSP nut to 3/8″ BSP hosetail gas hose tail provides a secure and reliable connection between gas hoses and fittings in welding and gas delivery systems. Precision‑manufactured for tight sealing and long‑lasting performance, it’s an essential component for professional TIG, MIG and gas welding setups. Key Features & Benefits 3/8″ BSP nut to 3/8″ BSP hosetail — standard sizing for compatibility with most welding gas hoses and fittings Secure fit — precision machining ensures a tight, leak‑resistant connection Durable construction — built to withstand workshop conditions and repeated use Versatile application — ideal for connecting regulators, gas lines and welding equipment Applications Perfect for linking gas hoses to regulators, gas mixers, welding machines or other gas system components where a 3/8″ BSP connection and hosetail fitting are required.   Compatibility Suitable for use in TIG, MIG and other gas‑shielded welding applications that utilise 3/8″ BSP threaded connections and flexible gas hoses

Starparts Gas Nut 3/8" BSP Right Hand Thread

Gas Nut – 3/8″ BSP Right Hand Thread Ensure a secure and leak-free connection in your welding gas delivery system with this high-quality 3/8″ BSP right hand thread gas nut. Precision machined for consistent fitment and durability, it’s an essential consumable for any TIG, MIG or gas welding setup. Key Features & Benefits Standard 3/8″ BSP right hand thread – compatible with a wide range of regulators, hoses and fittings Precision machined – ensures reliable, tight sealing to prevent gas leaks Durable construction – designed to withstand workshop environments and repeated assembly Versatile use – suitable for TIG, MIG and other gas-shielded welding applications Applications Used to secure and seal gas line connections on welding machines, regulators, gas hoses and accessories where a 3/8″ BSP right hand thread is required. Compatibility Fits any 3/8″ BSP right hand threaded gas port or fitting commonly found on welding equipment and gas system components.

Tecna TE1700C Weld Analyzer

The TE1700C “WELD TESTER” is a portable instrument purposely designed for measuring the resistance welding parameters. By using different kind of probes, the same instrument enables to measure the welding current, the force at the electrodes, the voltage at the electrodes, the energy, the resistance and the thermal current. The analyzer can be set through the 5.7″ color LCD touch screen, an indispensable high performing diagnostic tool which provides a graphical display of the waveforms of the selected signals.Suitable for measuring current of AC, DC / MFDC and CDW machines   Main Features: Current measurements: RMS value, maximum positive peak and maximum negative peak. Measure of the conduction angle in degrees for AC machines. Measurement of the welding time in cycles with a 1/2 cycle resolution or in ms with a 0.1 ms resolution; maximum time of measurement 6 seconds. Voltage measurements: RMS value, maximum positive peak and maximum negative peak. Measurement of the delivered energy during the welding and of the electrical resistance value of the material. Initial and final blanking function with programmable duration to mask the slopes of the welding current. Management of the pulsations up to a maximum of 9. Measurement of the welding force: it displays the maximum and minimum average force values at the beginning and at the end of the welding time. Blanking function, it eliminates the measurement errors due to a high impact strength and allows its analysis. Storage of measurements (30.000 max), statistical analysis and the details of the last 100 measurements available directly on the instrument. Management of 16 different limit masks recallable trough external inputs, the result of the limit evaluation is available through an outward output (WELD MONITOR). Limits on the measurement selectable among time, current, power and strength. Ethernet and Wi-Fi interfaces for the instrument configuration and for the measurements visualization through smartphone/tablet or PC. USB 2.0 output for memory stick use for storing data and waveforms (bitmap and csv formats). Integrated clock to document each measurement with date and time of execution. Integrated weld tables accessible through the touch screen display. Wide range of measure transducers. Automatic acknowledgment of the connected transducers. Powered by rechargeable Ni-Mh batteries and supplied with the power set. Battery life of approximately 10 h depending on usage. Firmware update via memory stick. Carrying suitcase for instrument and accessories.

DWT Pipe Purging 25MM - 165MM Kit In Case

DWT Pipe Purging 25MM - 165MM Kit In Case  DWT Pipe Purge System Complete Set • For pipe I.D. 25-165mm • c/w Plastic case   A flexible connection between the rubberised sealing discs allows the space between the bungs or dams to be situated or pulled through the bends of the pipe to be purged. INCLUDED WITHIN THE KIT:   Sealing discs (25-175 mm) Base unit (200 mm) 10 m stainless steel cable 10 m hose Coupling

DWT Weld Purge Monitor Oxy Pro

DWT Weld Purge Monitor Oxy Pro Digital Weld Purge Oxygen Monitor • Pipe Purging 5-999ppm O2  • Weld purge monitor oxypro Simple menu navigation LED display, parameter entry by membrane keyboard Measuring range 5 - 999 ppm O2 Suitable for inert gases and gases with hydrogen content of max. 10 % Measuring cell made of zirconium oxide  Specially developed for flexible use on construction sites and in the workshop, oxygen analyzer facilitate the welding of stainless steel, since the oxygen concentration can be displayed with an accuracy of up to 0.0005% (5 ppm). Before taking measurements of the welding environment, the oxygen analyzer must be calibrated according to the normal oxygen concentration in the air (20.9%). The meter maintains calibration even if the device is turned off in the meantime. It is important to ensure that the calibration is repeated at regular intervals. The instrument has built-in temperature compensation to guarantee reliable measurement results at the respective working temperature. Large, unexpected temperature changes can change the measurement results until the temperature of the sensor has stabilised.

Jasic JM272S Separate Wire Feed Inverter MIG Welder Package - Water Cooled

Jasic MIG 272 Separate Inverter Welder - Water Cooled The Jasic MIG 272S Separate Inverter Welder represents the pinnacle of welding technology, offering a powerful, versatile solution for professionals seeking superior welding performance. Part of the esteemed Jasic 270 series, this machine is distinguished by its advanced IGBT welding components, designed to handle demanding and repetitive welding cycles with unparalleled reliability and efficiency. At the heart of the Jasic MIG 272S is state-of-the-art control circuitry complemented by a digital A/V display. This feature allows welders to monitor and adjust welding parameters precisely, ensuring optimal control over the welding process and enabling superior weld quality and consistency. This modular package boasts excellent welding characteristics and demonstrates an impressive duty cycle of 270A at 30%, running off a single-phase 230V input. This high-duty cycle increases productivity, allowing longer welding periods with less downtime. It is ideal for workshops, fabrication sites, and industrial applications where efficiency and reliability are paramount. The Jasic MIG 272S's versatility is evident in its ability to work with various wire sizes and types. It can smoothly handle solid steel wires up to 7.9mm, stainless steel solid wires up to 9.5mm, and aluminium solid wires up to 9.5mm. Furthermore, it can use flux-cored steel wire up to 6.4mm, offering a comprehensive range of welding solutions for different materials and thicknesses. This comprehensive package includes the MIG inverter machine power source, a robust 4-roll wire feed unit for consistent wire feeding, a 5-metre interconnecting cable for flexibility in setup, a high-quality MIG welding torch, a work return lead and clamp, and a gas hose with regulator for complete setup out of the box. The Jasic MIG 272S Separate Inverter Welder embodies advanced welding technology, offering unmatched performance, versatility, and reliability. Whether for industrial fabrication, automotive repairs, or construction projects, this machine is engineered to meet the highest standards of professional welding. Key Features: Single Phase IGBT MIG inverter welder High-powered 230V welding machine Digital amp and volt meters 4 Roll wire feed unit High duty cycle - single-phase inverter Advanced control circuitry Suitable for 0.6/0.8/1.0 and 1.2mm wires Burn back control & wire inching 2T/4T trigger function Power & status LED's Gas check function Variable inductance Inverter trolley takes a full-size gas cylinder AVR generator friendly  What is included in this package? MIG inverter machine power source 4 roll wire feed unit 5 metre interconnecting cable Water-cooled MIG welding torch Work return lead and clamp Gas hose and regulator.  Water Cooler Tank  

Jasic EVO 2.0 FRC-02 Wireless Bluetooth Foot Pedal Control

Jasic EVO 2.0 FRC-02 Wireless Bluetooth Foot Pedal Control The Jasic EVO TIG and MIG wireless foot pedal uses Bluetooth technology and a transceiver to receive messages wirelessly, providing excellent hands-free control whilst welding. The foot pedal lets you control the amperage during welding, which is especially useful when TIG welding with Aluminium, as it allows you to depress the pedal at the start of the weld to deliver more amperage to create the weld pool. The operator can then decrease the power near the end of the weld, which can also help prevent weak points in the weld. Pedal fits the following EVO Models: TIG Welders: Jasic EVO TIG 200 PFC Jasic EVO TIG 200P PFC Jasic EVO TIG 200P ACDC MIG welders: Jasic EVO MIG EM-160C Jasic EVO MIG EM-200C Jasic EVO MIG EM-200CT Jasic EVO MIG EM-250CT Kit Contains: Jasic EVO FRC-02 Wireless Foot Pedal Remote Control Receiver Module

3 Jaw 200MM Quick Release Chuck For Weldturn Rotary Positioners

Weldturn 3 Jaw Chuck For Rotary Positioners D-200 (CAP0512) For BY50 / BY100 Clamp Range Diameter 5 - 200mm Centre Hole Diameter 65 mm

Weldturn Adjustable Torch Support Stand For Rotary Positioners

Weldturn Adjustable Torch Support For Rotary Positioners  fits the BY50 & BY100 models, maybe other brands with some slight modification 

Weldturn BY300 Rotary Welding Positioner With Footpedal

BY300 Technical Specifications WELDTURN BY300-110V CAP0505 WELDTURN BY300-240V CAP0506 Rotation Speed 0.3 - 2.5 RPM Capacity (Horizontal) 300 Kg Capacity (Vertical) 150 Kg Tilt Angle 0 - 90° Tilt Mode Hand wheel (Worm Gear) Gear Box Double Reduction Foot Pedal Stop / Start Protection HF Interference Table Diameter 450 mm Max. Welding Current 450 Amp @ 60% Height 510 mm Width 500 mm Length 500 mm

Weldturn BY50 Rotary Positioner Turntable

Inverter controlled positioners. The front panel includes an on off switch, forward/ reverse switch & speed control knob. The turntables enables the positioning to any angle between horizontal & 90° by the use of the hand wheel which drives the worm gear. All internal gears are made from hardened steel for high performance, the lock off device prevents the table being knocked off angle. The table has 6 machined slots 75mm x 12mm (BY50) / 86mm x 13mm (BY100) / 115mm x 15mm (BY300) for mounting of jigs or a quick release chuck (See options). The table is also scored every 25mm with a circular mark to assist in the setting up of jobs. Our smaller turn tables (BY50/100) are anti-electromagnetic, which reduces interference of Tig welding HF   BY50 Technical Specifications WELDTURN BY50-110V CAP0501 WELDTURN BY50-240V CAP0502 Rotation Speed 1 - 7 RPM Capacity (Horizontal) 50 Kg Capacity (Vertical) 25 Kg Tilt Angle 0 - 90° Tilt Mode Hand wheel (Worm Gear) Gear Box Double Reduction Foot Pedal Stop / Start Protection HF Interference Table Diameter 315 mm Max. Welding Current 350 Amp @ 60% Height 375 mm Width 430 mm Length 430 mm

Weldturn BY10 Rotary Welding Positioner 230V

Weldturn BY10 Rotary Welding Positioner 230V WELDTURN BY10 is a 10Kg light duty positioner designed for lighter work pieces. The rotation is driven by a DC motor with a switch for clockwise & anti-clockwise rotation with stepless speed regulation. This machines comes complete with a 65mm quick release chuck and foot control pedal BY10 Technical Specifications: Rotation Speed 2 - 10 RPM Capacity (Horizontal) 10 Kg Capacity (Vertical) 5 Kg Tilt Angle 0 - 90° Tilt Mode Manual Foot Pedal Stop / Start Table Diameter 180 mm Height, Width, Length 370 x 270 x 215mm Chuck (CAP0511) 65mm Chuck included 

TIG Brush Spare Brush With Stainless Steel Ferrule M6 Thread Pack Of 10

TIG Brush Spare Brush – Stainless Steel Ferrule, M6 Thread (Pack of 10) The TIG Brush Spare Brush is a premium replacement accessory designed for TIG welding applications, providing precise cleaning and surface preparation for stainless steel, aluminum, and other non-ferrous metals. Each brush features a durable stainless steel ferrule and M6 threaded shank for secure attachment to compatible TIG brushes or welding tools. Supplied in a pack of 10, these spare brushes are ideal for workshops and fabrication environments, ensuring consistent performance and extended service life of your TIG cleaning tools. The stainless steel bristles deliver efficient oxide and contamination removal while preserving the integrity of the workpiece. Key Features: Pack of 10 TIG spare brushes – convenient for workshops and production Stainless steel ferrule – strong, durable, and resistant to corrosion M6 threaded shank – secure and easy attachment to TIG brushes High-quality bristles – efficiently remove oxide, scale, and contamination Maintains workpiece surface integrity – ideal for stainless steel and aluminum Applications: TIG welding surface preparation Oxide removal and cleaning of stainless steel and non-ferrous metals Workshop and industrial fabrication use Maintenance and tool replacement in welding environments

TIG Brush Unique Propel System Torch With Lead

TIG Brush Unique Propel System Torch With Lead  To retain its leading position, Ensitech understood the necessity to think outside the box. User focus has now shifted from the power supply to the application process with the user requiring a solution that is fast, safe, ergonomic and economical.The design (patent pending) of the PROPEL Torch® differs radically. The ‘T’ shaped handle allows the user’s wrist to assume a more natural position during weld cleaning, which reduces user fatigue, and provides a safer, more powerful method of cleaning. by simply twisting the back of the torch you can keep adjusting the brush to give the perfect amount of bristles contact with your workpieceTHREADLESS BRUSH SYSTEM PATENT PENDING. QUICK RELEASE BRUSH FOR USE WITH THE TIG BRUSH WELD CLEANING SYSTEM

TIG Brush TBE-700 Weld Cleaning Machine Package

TIG Brush TBE-700 Weld Cleaning Package  Do you want the FASTEST TIG & MIG electrolytic weld cleaner in the World? Years of experience, ongoing research and development and, customer feedback have resulted in the TIG Brush™ TBE-700 attaining this status! Already recognized as the fastest, most powerful electrochemical weld cleaner of its type in the industry at a competition ending 110 amps @ 100% duty cycle; the well known and reliable 700 series retains market dominance offering a speed for MIG & TIG weld cleaning that is at least twice the speed of the nearest alternative. The machine can also be used for electropolishing, surface cleaning, and branding stainless steel. This Set Contains:  1 TIG BRUSH® TBE-700 Weld Cleaning Machine - dual voltage   1 TIG BRUSH ® 240 Volt Lead     1 TIG BRUSH® Red Lead - 6m with Integral Handle   1 TIG BRUSH ® TB-25 Weld Cleaning Fluid - 1 Litre   1 TIG BRUSH ® Black Lead - 6m with Earth Clamp   1 TIG BRUSH ® TB-42 Neutralising Fluid - 1 Litre   1 TIG BRUSH ® Wand - 100mm   1 TIG BRUSH ® Spray Bottle   1 TIG BRUSH ® Short Shroud   1 TIG BRUSH ® Fluid Dipping Container   1 TIG BRUSH ® Long Shroud   1 TIG BRUSH ® Orange Microfibre Cloth   10 TIG BRUSH ® Spare Brush Tips   1 TIG BRUSH ® Blue Microfibre Cloth   1 TIG BRUSH ® 110 Volt Lead   1 TIG BRUSH ® Blue Brush Tip Box  

TIG Brush TBE-550 Weld Cleaning Machine Kit

TIG Brush TBE-550 Weld Cleaning Machine Kit The TBE-550 utilizes the 700’s design and technology to deliver mid to heavy application while being the most economical for its class. It’s the best electrolytic weld cleaner for those who need a powerful machine that can clean dirtier welds while also priced lower than the 700. The TIG Brush’s proven combination of heat, electricity and chemistry delivers superior results consistently and reliably. The machine can also be used for electropolishing, surface cleaning, and branding stainless steel. TIG Brush™ genuine technology enhanced to give you a Superior finish. The TBE-550 utilizes a specifically focused adaptation of the 700 series design, to align its performance with Ensitech’s latest technological advance, the PROPEL™ Torch. As you would expect, this gives you the superior results consistently and reliably delivered by our proven combination of heat, electricity and use of genuine TIG Brush cleaning and branding fluids. TIG Brush on going innovation and patented power delivery system gives you peace of mind in the knowledge that you have achieved the industry’s highest level of passivation in a fast but safe way. This Set Contains:  1 TIG BRUSH® TBE-550 Weld Cleaning Machine - dual voltage 1 TIG BRUSH ® 240 Volt Lead   1 TIG BRUSH® Red Lead - 4m with Integral Handle 1 TIG BRUSH ® TB-25 Weld Cleaning Fluid - 1 Litre 1 TIG BRUSH ® Black Lead - 4m with Earth Clamp 1 TIG BRUSH ® TB-42 Neutralising Fluid - 1 Litre 1 TIG BRUSH ® Wand - 100mm 1 TIG BRUSH ® Spray Bottle 1 TIG BRUSH ® Short Shroud 1 TIG BRUSH ® Fluid Dipping Container 1 TIG BRUSH ® Long Shroud 1 TIG BRUSH ® Pink Microfibre Cloth 10 TIG BRUSH ® Spare Brush Tips 1 TIG BRUSH ® Blue Microfibre Cloth 1 TIG BRUSH ® 110 Volt Lead 1 TIG BRUSH ® Blue Brush Tip Box

TIG Brush TBE-440 Weld Cleaning Machine Package

TIG Brush TBE-440 Weld Cleaning Machine Package  High-Performance Weld Cleaning, Passivation & Polishing – Built for Demanding Stainless Steel Applications The TIG Brush TBE-440 is a premium electrochemical weld cleaning system that delivers superior cleaning, passivation, and surface restoration on stainless steel welds. Engineered for speed, durability, and user safety, the TBE-440 features Dynamic Power Transfer (DPT) technology to ensure consistent performance even on heavier or more complex welds. Whether you're working in food-grade fabrication, architectural stainless, or pharmaceutical equipment, the TBE-440 is designed to deliver professional results — quickly, cleanly, and without surface damage. Key Features: Powerful Electrochemical Cleaning: Quickly removes heat tint, discoloration, and oxidation from TIG and MIG welds. Advanced Passivation: Simultaneously re-passivates the stainless surface, restoring corrosion resistance in one step. Dynamic Power Transfer (DPT): Automatically optimises cleaning output to match the weld and maintain consistent results. Polishing Functionality: Achieve a bright, uniform finish on stainless welds and surfaces. Safe & Efficient: Non-toxic and acid-free process eliminates the need for hazardous pickling pastes or abrasive methods. Industrial Durability: Built in Australia with a rugged, portable design suitable for workshop or on-site use. Kit Includes: TIG Brush TBE-440 Machine Heavy-duty brush lead and wand Earth lead and clamp Genuine TIG Brush cleaning and neutralising fluids (starter bottles) High-performance cleaning brush Carry case Operating manual and safety guide Technical Specifications: FeatureDetails Input Voltage 110–240V AC Output Voltage Up to 30V DC (cleaning output) Technology Dynamic Power Transfer (DPT) Weight Approx. 9–10 kg Dimensions 320 x 140 x 280 mm (approx.) Brush Compatibility TIG Brush genuine consumables only Ideal For: Stainless steel TIG & MIG welds Pipework, tanks, vessels, and railings Food & beverage industry equipment Pharmaceutical and medical-grade fabrications Architectural stainless finishes Marine and offshore applications The TIG Brush TBE-440 is the professional’s choice for fast, safe, and effective weld cleaning and passivation. Designed for demanding stainless steel applications where finish, hygiene, and corrosion resistance matter gives the user peace of mind knowing they will always achieve the fastest, safest and most effective weld cleaning results. This Set Contains:  1 TIG BRUSH® TBE-440 Weld Cleaning Machine - dual voltage   1 TIG BRUSH ® 240 Volt Lead   1 TIG BRUSH® Red Lead - 3m with Integral Handle 1 TIG BRUSH ® TB-25 Weld Cleaning Fluid - 1 Litre 1 TIG BRUSH ® Black Lead - 3m with Earth Clamp 1 TIG BRUSH ® TB-42 Neutralising Fluid - 1 Litre 1 TIG BRUSH ® Wand - 100mm 1 TIG BRUSH ® Spray Bottle 1 TIG BRUSH ® Short Shroud 1 TIG BRUSH ® Fluid Dipping Container 1 TIG BRUSH ® Long Shroud 1 TIG BRUSH ® Pink Microfibre Cloth 10 TIG BRUSH ® Spare Brush Tips 1 TIG BRUSH ® Blue Microfibre Cloth 1 TIG BRUSH ® 110 Volt Lead 1 TIG BRUSH ® Blue Brush Tip Box 1 TIG BRUSH ® Tanos Container 1 TIG BRUSH ® Memory Stick

TIG Brush TBE-330 Weld Cleaning Machine Package

TIG Brush TBE-330 Weld Cleaning Machine Package Professional-Grade Electrochemical Weld Cleaning for Stainless Steel The TIG Brush TBE-330 is an advanced electrochemical weld cleaning system designed specifically for cleaning, passivating, and polishing stainless steel welds quickly and safely. Built with cutting-edge technology and housed in a rugged industrial case, the TBE-330 delivers powerful, consistent results while protecting the integrity of the material surface. This complete package is ideal for fabricators, stainless steel specialists, and industrial users looking to increase productivity and reduce post-weld finishing time — all without using harsh pickling acids. Key Features: Instant Weld Cleaning & Passivation: Effectively removes heat tint, oxides, and discoloration from TIG and MIG welds. Electrochemical Process: No grinding, bead blasting, or pickling paste required — preserves surface finish and grain. Compact & Lightweight Design: Easy to move around the workshop or job site, with an intuitive interface for simple operation. Fast & Consistent Results: Delivers professional-quality cleaning and passivation in seconds. Safe to Use: Non-toxic, fume-free system with minimal operator risk when used correctly with TIG Brush fluids. Durable Construction: Engineered in Australia with a robust industrial housing for long-term reliability in demanding environments. Package Includes: TIG Brush TBE-330 Machine Unit High-performance weld cleaning brush with handle and lead Earth lead and clamp Carry case Starter set of TIG Brush cleaning and neutralizing fluids Instruction manual and safety guide Specifications: FeatureDetails Input Voltage 110–240V AC Output Range Up to 30V DC (electrochemical output) Process Type Electrochemical weld cleaning Weight Approx. 7–9 kg Dimensions 300 x 120 x 280 mm (approx.) Brush Compatibility TIG Brush genuine consumables only Ideal Applications: TIG & MIG stainless steel welds Food-grade stainless steel fabrications Architectural and decorative finishes Pharmaceutical, marine, and sanitary equipment Any application requiring professional stainless steel presentation and corrosion resistance TIG Brush sets the global standard in weld cleaning. The TBE-330 is the go-to choice for professionals who demand speed, safety, and a flawless stainless finish — every time.  

TIG Brush Weld Cleaning Brush With Copper Ferrule M6 Thread Pack Of 10

TIG Brush Weld Cleaning Brush With Copper Ferrule Introducing the TIG Brush Weld Cleaning Brush with Copper Ferrule, an essential accessory for achieving pristine weld finishes. Designed for compatibility with many of the common weld cleaning machines equipped with M6 thread wands, these brushes offer versatility and ease of use across a variety of setups. Each brush features durable carbon bristles, expertly crafted to work seamlessly with weld cleaning acids and neutralizers. This design ensures effective and efficient cleaning, removing impurities and restoring the original appearance of your welds. The copper ferrule provides added strength and stability, ensuring the brush maintains its integrity during rigorous use. The TIG Brush Weld Cleaning Brush comes in a convenient pack of 10, making it a cost-effective and reliable choice for professionals and hobbyists alike. Whether you're dealing with stubborn stains or preparing surfaces for further treatment, these brushes are designed to deliver outstanding results every time. With the TIG Brush Weld Cleaning Brush, you can maintain the highest standards of cleanliness and quality in your welding projects, ensuring your work not only looks great but also meets the necessary performance and durability requirements.

Mitre PO4 Dual Voltage 110/230V Portable Welding Electrode Drying Over(Quiver)

Mitre PO4 Dual Voltage 110/230V Portable Welding Electrode Drying Over(Quiver) welding electrode drying oven for removing moisture from the electrode before welding giving optimal welding conditions  Electrode weight capacity: 15KG Thermostatically controlled. Temperature range: 50C-320C (adjustable). Dual voltage 110V/230V input. Output: 0.3KW. Exterior dimensions: 175MM x 260MM x 610MM Interior dimensions: 121MM x 115MM x 460MM Weight: 7.5KG

Mitre IQ15 Portable Welding Electrode Drying Oven (Quiver) 11KG Capacity

Mitre IQ15 Portable Welding Electrode Drying Oven (Quiver) 11KG Capacity Air Insulated Quiver: a new model of Portable Welding Rod Oven, with adjustable thermostat up to 400°F, Basket for Rods, available in various Voltages (please specify when ordering). Electrode weight capacity: 11KG Thermostatically controlled. Temperature range: 50C - 200C (adjustable) Available in 110V or 230V input voltage. Output: 0.3KW. Exterior dimensions: 206MM x 243MM x 630MM Interior dimensions: 110MM x 130MM x 473MM Weight: 7.5KG

Kemppi RA 253A 250A MIG Welder Package

Kemppi RA253A 250A MIG Welder Package The Kemppi RA253A is a cost effective MIG/MAG welding machine which is capable of delivering 250A with 3 phase 2415V power supply. This package includes control panel, 2 roll wire feed roller, Flexlite GX welding gun and earth return lead pack. This machine has many Trademarked Kemppi functionalities, including: WireLine, GasMater,Brights and Hotspot heat treatment.  Why we love the Kemppi RA253A: Modern machine, energy efficient power source. Mixed or C02 shielding gas- excellent performance with either. Arc ignition is clean and precise. Maximum output at 35% duty cycle LCD display which is large and clear. WireLine service indication Gasmate chassis design with innovative floor level cylinder loading.  Brights cabinet lighting HotSpot heat treatment functionality  2T/4T gun switch latching Sport and cycle arc timer Storage tray for parts 3 year Kemppi warranty.  This MIG welding machine is ideal for all modern environments, the Kempact range are designed to be robust and have high quality design which is stylish and on purpose. This machine allows the welder to be productive, accurate and efficient.  The newly designed power source allows for optimal performance and good power cost efficiency. We stock a range of models to suit your every requirement. IF you wish to discuss your options please call 01845 202989.  Regular R Control Panel- Provides a full manual setting of parameters for voltage and wirefeed speed as well as Gas type selection, 2T/4T gun latching control, SPOT/CYCLE arc timer or the HOT SPOT function (ideal for thin sheet fabrication or automotives).  Adaptive A Control Panel- Additional to standard features the Kempact Adaptive control allows view of parameters such as plate thickness control, filler material selection and 5 memory channels all within the adaptive mode set-up.  Package Includes: 1 x Kemppi Kempact RA253A MIG Welding Machine  1x Flexlite GXe305 3.5MTR MIG TORCH 1 x Earth Lead PLEASE NOTE: Wire Feed Rollers To Be Ordered Separately     

Kemppi Kempact 323R 415V 320A MIG Welder Package

Kemppi Kempact 323R 415V 320A MIG Welder This model is a modern efficient machine with excellent welding performance, this MIG welder has Wireline, GasMate, Brights cabinet lighting and HotSpot heat treatment functionality. 2T or 4T latching feature. The arc has a timer for spot and cycle. The memory channels can be used for more efficient welding as the settings can be set by the welder. Designed for the modern welding workshop, Kempact RA expresses stylish and purposeful design through high build quality and functional user benefits, making weld tasks productive, accurate and efficient. Kempact RA is built on Kemppi’s latest power source platform, ensuring optimal welding performance and excellent power cost efficiency. 320 ampere power sources, including a choice of either Regular (R) or Adaptive (A) control panel interface, which serve the wide ranging needs of metal fabrication workshops. This package specification includes welding gun and earth return lead pack. Why we love the Kemppi Kempact 323R MIG 415V Welder: Compact and portable  Optimal weld performance Modern and efficient MIG welder Features such as: WireLine™ service indicator, GasMate™ chassis design featuring floor level cylinder loading, Brights™ cabinet lighting and HotSpot™ heat treatment functionality. 2t/4t switch latching Parts storage tray Kemppi 3 year warranty Costs savings on energy Maximum output at 35% duty cycle  This Package Includes: Kemppi Kempact 323R MIG Welder 1 x Kempppi Flexlite GX403G MIG Torch 3.5Mtr 1 x 4Mtr Earth Lead 1 x Gas Hose  Please Note: Feed rollers are to be ordered separately   

ESAB Renegade VOLT ES 200i Dewalt Battery Powered Arc Stick Welder

ESAB Renegade VOLT ES 200i Battery Powered Welder The ESAB Renegade VOLT™ ES 200i is a true game-changer for welders who need power on the go. This compact, cordless Stick (SMAW) and Live TIG (GTAW) welder can run on battery, mains power, or a clever AMP+ Hybrid Mode — giving you total flexibility wherever the job takes you. Powered by DEWALT® FLEXVOLT® batteries (6 Ah, 9 Ah, or 12 Ah), the Renegade VOLT delivers serious performance. With four 12 Ah batteries, you can burn through up to 33 E6013 electrodes on a single charge, and those batteries come included.* Whether you’re working offsite, in a remote location, or somewhere mains power is limited, this machine is built to keep up. In AMP+ Hybrid Mode, it combines mains and battery power, which helps stop smaller breakers (like 10A or 16A) from tripping — and gives you an extra boost when running on 120V input.   The Renegade VOLT isn’t just powerful — it’s designed to take a beating. It features a tough, impact-resistant housing and multiple lift points, making it easy to move around the site. The bright, full-colour display is made for outdoor use, even in direct sunlight, and gives you useful info like battery status and estimated arc time at a glance.   Performance-wise, it delivers a smooth, stable arc with handy functions such as hot start, arc force, memory storage, and a dedicated cellulosic mode (6010), letting you fine-tune settings to suit the job. *Based on standard operating conditions. Features: 200 A output on AC mains (230V) Up to 140 A output on battery power Includes (4) DEWALT FLEXVOLT 20V/60V max 12 Ah batteries AMP+ Hybrid Mode for extra power Lightweight and portable battery powered welder Durable, impact-resistant housing Sun-friendly, intuitive user interface Memory storage for welding parameters Industries:  Agricultural Equipment Civil Construction Food and Beverage Marine and Offshore Mining Power Generation Repair and Maintenance Railcars Ship and Offshore Yards Transportation Processes:  SMAW/MMA (Stick) GTAW (TIG) Please note: This item is a special order item that needs to be ordered from the manufacturer.

EWM Picotig 220 Puls DC 5P TIG Welder Power Source Only

EWM Picotig 220 Puls DC 5P Power Source Only  TIG DC inverter welding machine, portable, gas-cooled, 5-pole, with PFC module High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology TIG DC and TIG pulse Non-latched/latched operation spotmatic and spotArc® MMA, MMA pulse, MMA cel, MMA cel pulse Robust housing with impact-resistant plastic cover 5-pole, digital welding torch connection with X technology allows users to connect Retox XQ welding torches Comfort 3.0 mini control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters Splash-proof in line with IP23 Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed Generator-compatible, even with long mains leads High mains voltage tolerance Consumables box in the handle – consumables always safely stored and within reach Cable holder for holding mains cable as standard Protective cap provided as standard protects the control against water, dirt and impact Adjustable hot start current and hot start time Adjustable Arcforce Antistick function Energy-saving thanks to high efficiency and standby function 3.5 m mains supply lead with 16 A shock-proof plug Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

EWM Picomig 220 Synergic TKG 230V MIG Welder Ready To Weld Package

EWM Picomig 220 Synergic TKG 230V MIG Welder Package Multiprocess MIG/MAG welding machine, compact, portable, Euro torch connector, with PFC module, for 5 kg D200 spools High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology Welding procedures and functions GMAW standard welding Characteristics for steel, CrNi, CuSi, aluminium and flux cored wires MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time Your benefits Portable, compact No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Robust casing suitable for construction site use High open circuit voltage for excellent ignition characteristics 4-roll drive Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Insulated wire space 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

EWM Picomig 225 Synergic TKG 230V MIG Welder Package

EWM Picomig 225 Synergic TKG 230V MIG Welder  Multi-process MIG/MAG synergic welding machine, compact, portable, Euro torch connector, with PFC module, for 15 kg D300 spools High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology Welding procedures and functions Characteristics for steel, CrNi, CuSi, aluminium and flux cored wire MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time Your benefits No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Portable or can be carried on a trolley High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires High open circuit voltage for excellent ignition characteristics Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Insulated wire space Delivery includes practical torch holder 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

EWM Picomig 225 Puls TKG 230V Pulse MIG Welder Package

EWM Picomig 225 Puls TKG 230V Pulse MIG Welder  Multi-process MIG/MAG pulse welding machine, compact, portable, Euro torch connector, with PFC module, for 15 kg D300 spools High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology Welding procedures and functions GMAW pulsed welding and GMAW standard welding Significantly less spatter formation and therefore less finishing work, all thanks to the pulse function GMAW pulse welding of aluminium and aluminium alloys Characteristics for steel, CrNi, CuSi, aluminium and flux cored wire MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time Your benefits No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Portable or can be carried on a trolley High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires High open circuit voltage for excellent ignition characteristics Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Insulated wire space Delivery includes practical torch holder 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

EWM Tetrix XQ 230 Puls AC/DC TIG 5P With Expert 3.0 Control Panel Package Builder

EWM Tetrix XQ 230 Puls AC/DC TIG 5P With Expert 3.0 Control Panel Package Builder This highly efficient TIG welder has standby functionality and is the latest generation EWM TIG AC/DC inverter machine, it features TIG AC, TIG DC and TIG pulse, MMA welding, MMA pulse welding, MMA Cel and MMA Cel Pulse. This is a modular machine which is capable of TIG AC/DC and TIG pulse, MMA welding and MMA Cel Pulse. It also has ActivArc and Spotarc technology.  Use the package uilder to spec your machine to your exact requirements   TIG Welding: Temperature and speed controlled fan for cooling which reduces contamination and noise emissions because the fan only is on when required. Remote control and function torch connection compatibility. Simple and tool free welding polarity reversal. IP23 splash proof standards. Robust case. Why we love the Tetrix XQ230 Puls AC/DC: Flexfit case system allows accessories and parts to be added using standard slot nuts. Expert 3.0 control with 7 inch screen- easy to see and use. LED information bar to show current status.  Optional connection to network through Wifi or LAN. High capacity cooling system using the 1500 W high performance centrifugal pump with 8 litre coolant tank- this saves money on consumable costs.  High mains voltage tolerance. Generator compatible. Consumables box in the handle. Description: Modular AC/DC TIG inverter welding machine of the latest generation TIG AC/DC, TIG DC and TIG pulse activArc® and spotArc® MMA, MMA pulse, MMA cel, MMA cel pulse Machine configuration ex works: Tetrix XQ 230 puls AC/DC with Comfort 3.0 DC machine control, 3.5 m mains cable including mains plug and 5-pole connection socket compatible with EWM X technology Tried-and-tested Comfort 3.0 control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters Robust housing with impact-resistant plastic cover Provided ex works ready for water block connection – guarantees ultimate flexibility in industry and trade Splash-proof in line with IP23 Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed Generator-compatible, even with long mains leads High mains voltage tolerance Consumables box in the handle – consumables always safely stored and within reach LED status bar indicates the current operating status with colours Optional network connectivity with ewm Xnet software via LAN or WiFi gateway 3.5 m mains lead with 16 A earthed plug Controls: Popular, praised and simply indispensable 7" Digital Screen  Five favourites buttons Click wheel for convenient use with welder’s gloves Reliable push-button operation Direct access to all main functions All parameters at a glance AC and DC versions available   Welding process DC TIG   TIG AC   MMA DC   MMA AC   E-Hand cel Operating modes Non-latched 2T   Latched 4T   spotArc   spotmatic AC functions AC tungsten balling   AC sine   AC trapezoidal   AC rectangle   AC balance   AC amplitude balance   AC frequency: 30 Hz to 300 Hz   Automatic AC frequency   AC commutation optimisation for highest arc stability Ignition options HF   Liftarc Pulse type Average value pulsing (0.2 Hz–20 kHz) incl. waveform setting (soft, middle, hard)   Thermal pulsing (time pulsing)   AC special MMA functions Hotstart   Arcforce   Antistick   Average value pulse welding Functions activArc   Automatic gas post-flow function   Cable resistance alignment Job functions Number of freely definable Jobs 100 TIG, 8 MMA, 8 MMA Cel

EWM Picomig 220 Puls TKG 230V Pulse MIG Welder Package

EWM Picomig 220 Pulse MIG Welder Why we love the EWM Picomig 220 Puls TKG MIG Welder Multiprocess MIG/MAG pulse welding machine, compact, portable, Euro torch connector, with PFC module, for 5 kg D200 spools High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology Welding procedures and functions GMAW pulsed welding and GMAW standard welding Significantly less spatter formation and therefore less finishing work, all thanks to the pulse function GMAW pulse welding of aluminium and aluminium alloys Characteristics for steel, CrNi, CuSi, aluminium and flux cored wires MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Robust casing suitable for construction site use High open circuit voltage for excellent ignition characteristics 4-roll drive Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Insulated wire space 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage  

Hypertherm 428926 Smart Sync 45A Machanized Finecut Cartridge

Hypertherm Smart Sync 45A Machanized Finecut Cartridge FineCut® cartridges produce a narrower kerf when used on thin mild steel and stainless steel up to 3 mm (10 gauge) which is ideal for fine detail cutting. To maximize cartridge life and performance it is important to select the cartridge that is optimized for the workpiece you are cutting. 30–45 A FineCut – mechanized finecut cartridges are compatible with: SmartSYNC torches for the Powermax65/85/105 SYNC™ systems Duramax® torches using a torch adapter* for Powermax45®  XP/65/85/105 systems

Hypertherm 428928 Smart Sync 45A Drag Finecut Cartridge

Hypertherm Smart Sync 45A Drag Finecut Cartridge FineCut® cartridges produce a narrower kerf when used on thin mild steel and stainless steel up to 3 mm (10 gauge) which is ideal for fine detail cutting. To maximize cartridge life and performance it is important to select the cartridge that is optimized for the workpiece you are going to be cutting. These 45A FineCut – hand drag cut cartridges are compatible with: SmartSYNC™ torches for the Powermax65/85/105 SYNC™ systems Duramax® torches using a torch adapter for Powermax45® XP/65/85/105 systems

Hypertherm 428930 Smart Sync 65A Mechanized Cut Cartridge

Hypertherm Smart Sync 65A Mechanized Cut Cartridge    Cutting Capacity 6mm - 12mm (1/4" - 1/2") SmartSYNC™ torches for the Powermax65/85/105 SYNC™ systems Duramax® torches using a torch adapter* for Powermax65®/85/105 systems. Mechanized cartridges can also be used on hand torches if cutting with a stand-off is desired.

Hypertherm 428925 Smart Sync 45A Mechanized Cut Cartridge

Hypertherm Smart Sync 45A Mechanized (CNC) Cut Cartridge The Hypertherm cartridge marks a revolutionary change to traditional plasma consumables. The cartridge is the product of several years of plasma engineering design expertise, combined with advanced manufacturing processes and materials. The result is a simplified consumable platform that is far from simple in performance Cartridge design benefits • Consolidation of consumable parts into a single-piece cartridge results in proper alignment of components, and optimization of the plasma process. Cartridge eliminates the mixing of new parts with used parts common during standard consumable change outs. The result is improved and consistent cut quality outcomes. • Cartridges have RFID tags that enable automated process set-up for Powermax SYNC™ systems using SmartSYNC™ torches. The tag also records valuable usage data for tracking consumable utilization and performance. • Cartridges are color coded by process and feature easy-to-read laser marking. Selecting the correct cartridge for the job at hand maximizes life and provides optimal outcomes

Hypertherm 428931 Smart Sync 65A Drag Cut Cartridge

Hypertherm Smart Sync 65A Drag Cut Cartridge  Compatible with: SmartSYNC™ torches for the Powermax65/85/105 SYNC™ systems. Once fitted to a SmartSYNC torch the system reads the data from the cartridge and then provides information to the power source screen including arc starts, transfers and hours used

Hypertherm 428927 Smart Sync 45A Drag Cut Cartridge

Hypertherm Smart Sync 45A Drag Cut Cartridge  The Hypertherm 428927 SmartSYNC 45A Drag Cut Cartridge is a high-performance consumable designed to deliver consistent, high-quality plasma cutting with maximum ease of use. Engineered as part of Hypertherm’s advanced SmartSYNC system, this single-piece cartridge replaces traditional multi-part consumables, simplifying setup while improving reliability and efficiency. Optimised for 45A drag cutting applications, this cartridge is ideal for cutting mild steel and other metals, offering clean, precise cuts on material up to approximately 16mm thickness. Its intelligent design allows seamless communication between the cartridge, torch, and power source, automatically setting the correct parameters for optimal performance.  The integrated RFID technology tracks usage data and consumable life, helping operators monitor performance and know exactly when replacement is needed—reducing downtime and preventing premature wear. Built for compatibility with SmartSYNC torches and adaptable for use with Duramax torches (with the appropriate adapter), it provides flexibility across a range of Hypertherm Powermax systems. Key Features: 45A drag cutting cartridge for precise, clean cuts Suitable for cutting metals up to approx. 16mm thickness Single-piece design replaces traditional multi-part consumables SmartSYNC technology for automatic parameter optimisation RFID-enabled tracking of consumable life and performance Compatible with SmartSYNC torches and adaptable to Duramax systems Reduces setup time and minimises operator error   Compatible with: SmartSYNC™ torches for the Powermax65/85/105 SYNC™ systems. Once fitted to a SmartSYNC torch the system reads the data from the cartridge and then provides information to the power source screen including arc starts, transfers and hours used. 

Jasic Footpedal For JT200DS & JT-200P PFC Machines

Jasic Footpedal For JT200DS & JT200P PFC Machines Jasic footswitch for use with Jasic 200DS & 200P PFC DC and AC/DC TIG welders, providing variable amperage control whilst welding. The footpedal works like the accelerator on a car, the further you depress it the more power you will get from the machine. This is very useful when welding aluminium as you need more heat to start with when creating the weld pool and less at the end of the weld as the material will have heated up considerably. This foot pedal is compatible with the following models: JT-200DS JT-200P PFC

Cibo FMCS PTX Clean + strip wheel 100mm x 100mm x 19mm keyway

 The FMCS PTX Clean & Strip Wheel 100mm x 100mm x 19mm is a specialist surface preparation wheel designed for removing rust, paint, coatings, oxidation and other surface contamination from metal components. Featuring an open, non-woven abrasive structure, the Clean & Strip wheel provides an effective cleaning action while helping to minimise unnecessary removal of the underlying base material. This makes it an excellent choice for preparing metal prior to welding, fabrication, painting or refinishing. The open construction helps resist loading when removing coatings and surface contaminants, allowing the wheel to maintain an effective cutting action throughout use. With its 100mm x 100mm dimensions and 19mm keyway fitting, the wheel is designed for use with compatible PTX and linear finishing machines. The wide 100mm working surface makes it particularly effective for cleaning larger areas of sheet metal, fabricated components and other metal surfaces quickly and consistently. Key Features FMCS PTX Clean & Strip Wheel 100mm x 100mm wheel dimensions 19mm keyway fitting Open non-woven abrasive construction Excellent for removing rust and oxidation Removes paint and suitable surface coatings Ideal for cleaning metal before welding Helps remove surface contamination Effective cleaning with controlled base-material removal Open structure helps resist clogging and loading Wide working surface for efficient processing of larger areas Ideal for fabrication, restoration and surface preparation  

Jasic Evo EM160C PFC Compact Inverter MIG Welder Package

Jasic EVO MIG 160 PFC Compact Inverter Introducing the Jasic EVO MIG 160 PFC Compact Inverter, which comes with a comprehensive 5-year warranty and delivers professional-grade welding performance with reliability you can trust. This package includes essential components: the Inverter Power Source, a 3-meter MIG Torch, a 3-meter Earth Cable and clamp, an Argon Regulator, and a Gas Hose, ensuring you have everything you need to get started right away. Designed for durability and ease of use, the Jasic EVO MIG 160 boasts a rugged, ergonomic design that enhances operational comfort and efficiency. Equipped with Clearvision Technology, welders can enjoy enhanced visibility, promoting precision and accuracy in their work. Experience intelligent welding with the integrated Synergic Control, which automatically adjusts parameters for optimal performance, streamlining the welding process. Thanks to its adaptable wide voltage range, this inverter easily caters to various welding needs. The inclusion of Welding Engineer Mode and Smart Lift TIG functionality further extends this machine's versatility, allowing for precise control and customization to suit specific welding tasks. Expect consistent and efficient MIG spot welding performance, ensuring high-quality welds every time. For added convenience, flexible remote control solutions are available as an optional feature, enhancing usability and adaptability. Featuring Power Factor Correction (PFC) and generator-friendly design, the Jasic EVO MIG 160 operates efficiently while minimizing energy consumption, making it an environmentally conscious choice. Quick factory reset capability and ultra-efficient auto sleep mode enhance operational efficiency, while compatibility with MIG digital torches and spool guns ensures versatility and adaptability to evolving welding needs. LED lighting inside the wire feeder cabinet, Active Balancing Air Passage (ABAP), and Fan-on-Demand cooling create a comfortable and productive working environment. Safety is paramount, and this inverter is equipped with a Voltage Reduction Device (VRD), key power component protection, and overcurrent and overheat protection, ensuring a secure and reliable welding experience. Elevate your welding capabilities with the Jasic EVO MIG 160 PFC Compact Inverter, a professional-grade solution designed to meet the demands of modern welding applications. Key Features: Rugged, ergonomic design Clearvision Technology Intelligent Synergic COntrol Adaptable wide voltage Welding engineer mode Smart lift TIG Consistent & efficient MIG spot welding  performance Flexible remote control solutions(optional) Power factor correction(PFC) Generator friendly Quick factory reset  Ultra efficient auto sleep mode Compatible with MIG digital torch & spool guns LED inside wire feeder cabinet ABAP- active balancing air passage Fan on demand cooling Voltage reduction device (VRD) Key power component protection Overcurrent & overheat protection

Steel Beast Rail Tug Oxy/Fuel Cutting & Welding Carriage

WELDING & CUTTING CARRIAGE The Rail Tug is a digitally controlled tractor designed for the mechanization of welding and thermal cutting processes. Featuring a rack and pinion drive system with electronic speed control, the Rail Tug creates weld bead geometry which is exact to your specifications, reducing costly over welding and decreasing filler metal usage. The Rail Tug can be used with semi-flexible track for plate and tank work with a minimum radius of 5 m (16 ft) or adapted to bent ring rail for pipe and tube applications.

Tecna Auto Spotter C/W Puller 230V Kit

Tecna Auto Spotter Kit c/w Puller 240V  This multi purpose portable welder is mainly used in car body repair. It allows: Resistance welding of nails and washers for sheets straightening. Cuts the cost on body repairs, you do not need to remove interiors trims and fitments, double skin areas are easily repaired. Resistance welding of screws and rivets. Sheets localised heating

Tecna 6kVa Pneumatic Water-cooled Spot Welding Gun C/W Pulse

Tecna 6kVA Pneumatic Spot Welding Gun c/w Pulse (Water Cooled) The TECNA® 7913P Handheld Spot Welder is a lightweight, reliable and simple to operate unit for the smash repair and sheet metal fabrication industries. The TECNA® 7913 comes standard with a pulse function, timer: a compensation circuit starts the timer only when there is a proper range of current, which allows welding on oxidised sheets, or on materials with a painted surface. The 7913P is a two-phase, water cooled, handheld spot welder designed for heavy-duty body repairs and light production work. There are a variety of arms available for this unit, enabling a range of applications.  

Tecna Handheld Spot Welder C/W Timer 230V

Tecna Spot Welder 2.5Kva c/w Timer 230V 3.8m Mains Cable, 7401 Arms

Tecna Hand Operated Spot Welding Gun 2.5kVa Kit 230V

Hand Operated Spot Gun 2kVA 230V With Case & Accessory Kit Includes: 125mm, 500mm arms, and a pair of cranked electrodes 2 Years Warranty

Tecna Hand Operated Spot Welding Gun 2.5kVa Pulse 230V

Hand Operated Spot Gun 2.5kVA Pulse 230V With Case & Accessory Kit Includes: 125mm, 500mm arms, and a pair of cranked electrodes 2 Years Warranty Key Features: 230V - 16A Input  Versatile portable spot welder for automotive body shops & maintenance repair Synchronous built-in electronic timer with SCR from 2-65 cycles  

Tecna 16Kva Column Spot Welder Pedal Operated

The TECNA TE101 is a microprocessor-based welding control.. The weld control is used to control the movement of the welder and the thyristor / silicon-controlled rectifier (SCR) that regulates the welding current. The working program followed by the TECNA TE101 is created through the 13 programming parameters available in the control. The TE 101 may be used for both manual and pneumatic-operated welders.   Features Synchronous thyristor drive with phase-shift control for welding current adjustment. Built in ammeter (RMS value), 2 selectable ranges (18-56 kA). Storing of 99 welding programs. Inputs for external selection of 31 programs or 15 programs with parity control. Welding times adjustment in half-periods. Pre-weld, slope and pulse functions. Welding current control limits. Error condition signaling output and function to stop welder operation. Single and repeat operating mode. WELD/NO WELD function. Welding current compensation function to assist welding of oxidised sheets and rods. Possibility to connect two independent start of cycle device using different welding programs. Auto retain disabling for manually actuated welders. First phase shift delay adjustment. It enables the machine line current best balance. Cos φ adjustment, allow to optimise current adjustment linearity. End of cycle output for automation applications. Thermostatic protection input. Self-adjustment to the mains frequency 50/60 Hz. Control of solenoid valve 24 Vdc 7,2 W max with short circuit protection. Optional insulated RS 232 interface. Allow the connection with a printer or a personal computer for production data recording.

CK Worldwide Fronius Gas Through Fitting Watercooled Safe-Loc CK Torch Adaptor

Fronius Gas Through Water-Cooled Safe-Loc CK Torch Adaptor The Fronius Gas Through Water-Cooled Safe-Loc CK Torch Adaptor is a precision-engineered interface that allows you to connect water-cooled TIG torches with Safe-Loc fittings to Fronius welding machines. Designed to ensure reliable delivery of both power and shielding gas while maintaining efficient water cooling, this adaptor is ideal for professional TIG welding setups where durability and performance matter. Key Features & Benefits Secure Safe-Loc connection compatible with Fronius twist-lock style power receptacles. Gas-through design ensures consistent shielding gas flow directly to the torch. Water-cooled capability helps maintain lower operating temperatures for prolonged welding performance. Rugged construction suited for workshop or industrial TIG applications. Compatibility Connects water-cooled TIG torches (with Safe-Loc fittings) to Fronius TIG welding power sources using a 35 mm twist-lock connection. Typically used with high-performance TIG torch systems where water cooling and gas-through capability are required. Application Perfect for professionals seeking a dependable adaptor that maintains efficient cooling and gas delivery between Fronius machines and compatible water-cooled TIG torch assemblies

JEI Rail Titan Modular TIG MIG/MAG Welding & Cutting Rail Tractror

MODULAR TIG-MIG-MAG WELDING AND CUTTING RAIL TRACTOR Rail Titan is fully modular mechanized tractor that can be custom configured for TIG-MIG-MAG welding, oxy-fuel or plasma cutting and gouging applications on flat or curved plate, tube and pipe. Linear torch oscillator produces straight, triangle, trapezoid and square weld paths. Rail Titan can travel on hi-flex, semi-flexible, rigid or ring tracks that can be clamped to ferrous materials with magnetic units and to non-ferrous materials by means of vacuum track system incl. vacuum pump and vacuum units

JEI Rail Bull Welding Carriage & Track System

Description A track welding carriage designed to produce butt and fillet welds without oscillation. The Carriage can work in PA (flat), PB (horizontal vertical), PC (horizontal), PF (vertical), and PG (vertical down) welding Positions. Rail Bull Can move along either Rigid or semi-flexible track. Both types of track are fixed to falt or curved ferromagnetic surfaces by means of dual magnetic units (minimum curvature radius 5 metres). Features & Benefits: Improves working environment - Removes operator from heat and fumes Compact, Lightweight design - Durable aluminium cast housing Ready to work in both vertical and horizontal positions - Durable positions of working Maintenance free 4 wheel drive - With worm drive reduction Silicone wheels - Heat resistant Quick clamping Torch Holder mechanism - Suits different types of MIG/MAG torches with diameters of 16 - 22mm Automatic ARC ON/OFF - Initiates welding and travel simultaneously Multifunctional LED  - Processes parameters and warnings Closed loop position control system based on electrical motor with encoder - Ensures increased accuracy of speed and positioning Reduced Waster filler metal - Eliminates over welding Automatic ARC ON/OFF system - Initiates welding with travel, simultaneously Linear Torch oscillator - To produce weave welds Rack and Pinion Drive Continuous welding Rigid rail Track System

Inelco Neutrix Portable Tungsten Grinder

Description The Inelco Neutrix is a portable Tungsten grinder that is both environmentally friendly and able to grind quality points on Tungsten electrodes for TIG and plasma welding. The Neutrix is the only machine that is equipped with an integrated dust filter, thereby protecting the operator and the environment against the unhealthy dust produced during the grinding of the electrode. The filter is replaceable. Due to the use of an electrode holder, the Neutrix is able to grind electrodes as short as 15mm with a standard electrode clamp, and 8mm with a special electrode clamp. The use of the electrode holder also ensures a precise and concentric tip every time. The integral length gauge and locking devicemakes sure that only the minimum amount of electrode is removed during the grinding process. This gives an instant cost saving as wasted tungsten is kept ot a minimum. The Neutrix is equipped with an inspection cover enabling the operator to see the grinding operation. The Neutrix is easy to operate, set the required grinding angle and secure the electrode into the holder using the locking device. The electrode is now set so as to minimise the amount of grinding required (0.3mm removal). Grinding takes place in the correct longitudinal direction along the electrode. One uniquie feature of the Neutrix is that it is equipped with an eccentric plate, which makes it possible to adjust the grinding position on the face of the wheel, this triples the life of the diamond wheel. The Neutrix is supplied in a case fully equipped for use, electrode clamps for 1.6, 2.4 and 3.2 diameter tungstens are included, other sizes are available. The storage case along with the moderate weight make the Neutrix ideal for working on site The Neutrix tungsten grinder is CE marked and is manufactured to meet all applicable EU directives    

Kemppi Master M 205 Pulse MIG Watercooled MIG Welder Package With 3.5Mtr

Kemppi Master M 205 Water-cooled welder The Master M 205 sets new standards for power and performance in a portable MIG welding machine. With a portable, lightweight design that's easy to carry, you'll enjoy having a portable MIG welder that can be moved wherever you need it. If you're working in tight spaces, the 5" LCD screen is bright and easy to read, while self-charging LED lights can be turned on to improve safety. They work with or without mains power. The Master M 205 is also easy to use. Both portable MIG welding machines come with Weld Assist, which automatically sets parameters to help you start welding quickly. It's a simple solution that welders can also use with minimal experience. Just select the material thickness, joint type, and welding position, then start welding. The Master M 205 is a portable pulse MIG welder with 200 amps of power at a 40% duty cycle. Take on a wider range of materials with pulse welding and do your best work anywhere with the convenience of a 1-phase power supply. Save time and take welding to the next level with 37 built-in MIG/MAG welding programs for Fe, Ss, AlMg5, AlSi5, CuSi3, and CuAl8 filler materials. The Master M 205 comes with 17 pulse-MIG programs and 20 1-MIG programs. If you're looking for a portable MIG welder that can complete high-quality welds in challenging environments, the Master M 205 should be on top of your list. Key Features Versatile process selection with premium MIG/MAG, DC TIG, and stick welding options Master M 205 includes a pulse MIG welding option with a 1-phase power supply Lightweight and portable welders that are easy to carry anywhere Ideal for tight workspaces Master M 205: 17 pulse MIG welding programs and 20 1-MIG welding programs as a standard Self-charging LED work lights for better worksite safety Designed to be lifted with a crane Weld Assist feature for fast parameter setting 6 memory channels 40% duty cycle Compatible with a generator Multivoltage as a standard feature Alternative transport cart options  

Kemppi Master M 205 Pulse Air Cooled MIG Welder With 5Mtr MIG Torch

Why we love the Kemppi Master M 205 Pulse MIG Welder The Master M 205 sets new standards for power and performance in a portable MIG welding machine. With a portable, lightweight design that's easy to carry, you'll enjoy having a portable MIG welder that can be moved wherever you need it. If you're working in tight spaces, the 5" LCD screen is bright and easy to read, while self-charging LED lights can be turned on to improve safety. They work with or without mains power. The Master M 205 is also easy to use. These portable MIG welding machines come with Weld Assist, which automatically sets parameters to help you start welding quickly. It's a simple solution that welders can also use with minimal experience. Just select the material thickness, joint type, and welding position, and start welding. The Master M 205 is a portable pulse MIG welder with 200 amps of power at a 40% duty cycle. Take on a wider range of materials with pulse welding and do your best work anywhere with the convenience of a 1-phase power supply. Save time and take welding to the next level with 37 built-in MIG/MAG welding programs for Fe, Ss, AlMg5, AlSi5, CuSi3, and CuAl8 filler materials. The Master M 205 comes with 17 pulse-MIG programs and 20 1-MIG programs. If you're looking for a portable MIG welder that can complete high-quality welds in challenging environments, the Master M 205 should be at the top of your list Key Features Versatile process selection with premium MIG/MAG, DC TIG, and stick welding options Master M 205 includes a pulse MIG welding option with a 1-phase power supply Lightweight and portable welders that are easy to carry anywhere Ideal for tight workspaces Master M 205: 17 pulse MIG welding programs and 20 1-MIG welding programs as a standard Root pass welding, thin sheet welding, and gap bridging with MAX Cool arc welding process as a standard in Master M 323 Self-charging LED work lights for better worksite safety Designed to be lifted with a crane Weld Assist feature for fast parameter setting 6 memory channels 40 % duty cycle Compatible with a generator Multivoltage as a standard feature Alternative transport cart options Kit Includes: Kemppi Master M 205 Pulse MIG Welder Kemppi Flexlite GXe305G MIG Torch ***Please Note Feed Rollers Need To Be Ordered Separately ***

Weltek Navitek Navitek S13 Welding & Grinding Airfed Helmet

The Navitek® S13 combines the best of autodarkening protection for welding, with one of the largest clear grinding visors available on the market.  The Navitek® shell and all its polycarbonates are certified for grinding with the specific standards EN 166B and EN 175B. The visor is made in perfectly clear 1.0mm thick polycarbonate.  The excellent ergonomics provides perfect protection of the forehead, the ears and the neck. This high comfort level can be advanced once equipped with side vision in shade DIN 5: the Navitek® S13 then provides a 160° vision to the welder, for improved safety and advanced comfort. These side vision are made out of transparent shade DIN 5 polycarbonate.  The Navitek® S13 is equipped with the longitudinal headgear with 4 settings: height, width, angle, and longitudinal adjustment for welders operating with corrective glasses.  Positionned into the liftable front frame, The new autodarkening S13 presents 2 major advantages:  1 - A revolutionary autodarkening filter restituting colors and enhancing contrasts. 2 - An extra-large viewing area in a light and ergonomic helmet.  The S13 is indeed equipped with a specific glass-pack: the vision of colors and contrasts, in both grinding and welding phases, is outstanding and uncomparable.  This true vision greatly improves the general quality of the welding cords, relieves the operator from stress and over-concentration, and make possible digital display reading.  In addition, the viewing area of the S13 has been extended to 100 x 67mm, with a perfect positioning and centering. This extra-large viewing area offers excellent optical classes 1/1/1/2.  The 4 arc sensors are associated to a very fast switching speed of 0,1ms for a flawless detection of the welding arc, with all welding processes: electrodes, MIG/MAG, TIG and micro-TIG.  2 ranges of welding shades are available to the welder: from DIN 5 to DIN 8, and from DIN 9 to DIN 13, in addition to the sensitivity level of the 4 arc sensors, and the delay which can be adjusted from 0,1s to 1,9s.  All the settings and parameters on the S13 are visible in a large and internal digital display, directly in front of the welder. All control knobs on the S13 are soft-touch, making it easy to adjust even with gloves on. 

Jasic EVO TIG AC/DC ET200P PFC Water Cooled TIG Package 110/230V

Why we love the Jasic EVO 2.0 AC/DC TIG 200P Water-cooled Package 110/230V The Evo TIG 200P AC/DC inverter welding machine represents a pinnacle of welding technology. It is designed to deliver exceptional performance and user experience in a durable and robust package suitable for various welding applications. This advanced machine incorporates cutting-edge technology to enhance welding capabilities and operator comfort, making it an indispensable tool for professionals and enthusiasts. One of the key features of the Evo TIG 200P AC/DC is its unique electrical structure and air passage design, which significantly improves the duty cycle and reliability of the equipment. This innovation ensures consistent performance even during demanding welding tasks, reducing downtime and enhancing productivity for the operator. The ClearVision display on the Evo TIG 200P AC/DC provides clear and informative data for the welding processes, offering operators real-time feedback and control over welding parameters. An optional TFT-LCD version is also available, providing enhanced visibility and additional functionality for precise adjustments.   Key Features of the Evo TIG 200P AC/DC Inverter Welding Machine: Rugged, Ergonomic Design: Built to withstand tough working conditions, ensuring durability and ease of use. ClearVision Technology: Provides operators with clear and informative data on welding processes for optimal control and precision. Adaptable Wide Voltage Range: Compatible with various power supply conditions, ensuring stable performance. HF Stabilising Technology: Ensures consistent high-frequency arc starting for reliable weld initiation. Dash-Arc: Enhances arc stability and control, facilitating smooth and clean welds. Smart Lift TIG: Enables easy and efficient TIG arc starting without high-frequency ignition. Full-Featured Pulse TIG Parameters: Allows precise control over pulse frequency, pulse duty cycle, and other parameters for tailored welding. Multiple AC Waveforms: Supports various AC waveforms for welding aluminium and other non-ferrous metals. Mixed Waveform, Mixed Waveform Frequency, Mixed Waveform Duty Cycle: Offers advanced waveform options for versatile welding applications. Flexible Remote Control Solutions (Optional): Provides additional control options for enhanced flexibility and convenience. Power Factor Correction (PFC), Generator Friendly: Energy-efficient design compatible with different power sources. Quick Factory Reset; Auto Sleep Mode: Enhances user convenience and energy savings during idle periods. Water-Cooled Option Available: Allows extended welding sessions with optimal cooling for the torch and equipment. ABAP (Active Balancing Air Passage): Optimizes air flow to improve machine performance and reliability. Smart Gas for Optimized Shielding Gas Consumption: Reduces gas consumption while maintaining optimal shielding gas coverage. On-Demand Fan: Ensures efficient cooling and reduces noise levels, enhancing overall user experience. Voltage Reduction Device (VRD): Enhances safety by reducing the open-circuit voltage when the welding machine is not in use. Key Power Electronic Component Protection: Safeguards critical components for long-term reliability and performance. Overcurrent and Overheat Protection: Protects the machine from potential damage due to excessive current or heat. TFT Screen (Optional): Provides enhanced visibility and user interface for intuitive operation and control.   Overall, the Evo TIG 200P AC/DC inverter welding machine combines advanced technology with ergonomic design and comprehensive features to deliver exceptional welding performance and user satisfaction. Whether used in industrial settings, fabrication workshops, or automotive repair environments, this machine offers versatility, reliability, and precision for various welding applications.

Jasic EVO EM200CT PFC 110/230V MIG Welder Package With Trolley

Jasic EVO 2.0 200PFC 110/230V MIG Welder With Trolley Package The Jasic EVO MIG 200CT is built for serious welders who want industrial performance in a rugged, easy-to-use package. With a tough ergonomic design, advanced digital controls and an impressive range of intelligent features, this compact MIG welder delivers outstanding results across fabrication, automotive, agricultural and on-site work. Featuring ClearVision HD digital display technology and a 45° slanted control panel, the 200CT offers exceptional visibility—even in bright workshop lighting—making setup quicker and more accurate. Its intelligent synergic control selects the ideal welding parameters automatically: simply choose your wire type, wire size, gas and material thickness, and you’re ready to weld. Built to perform in demanding environments, the unit includes Power Factor Correction (PFC) for generator-friendly operation, wide voltage adaptability (95–265V), and Active Balancing Air Passage (ABAP) cooling for improved reliability. Inside the wire-feed cabinet, you’ll find LED convenience lighting and a handy feed roll storage slot, with spool-gun compatibility for fast aluminium changeovers. Extra features like Smart Lift TIG, advanced MMA functions, VRD safety, fan-on-demand, overheat/overcurrent protection, and a quick factory reset make this a truly versatile multi-process machine. Optional remote controls, digital torches and TFT screens further enhance usability for professional fabricators who want total control at their fingertips. Whether you're tackling precision fabrication or consistent spot welding, the Jasic EVO MIG 200CT is engineered to deliver reliability, flexibility and exceptional weld quality—every time. Key Features ClearVision technology Intelligent synergic control Adaptable wide input voltage range Welding engineer mode Smart DC lift TIG Consistent and efficient MIG spot welding performance. Flexible remote control solutions. Generator friendly. Auto sleep mode for improved energy efficiency. Compatible with digital control MIG torch, as well as spool gun. LED light inside wire feed cabinet for improved vision. Fan cooling on demand. Voltage reduction device(VDR) Ovecurrent and overheat protection

Jasic EVO EA200 PFC MMA (Stick) Welder 110/230V

Why we love the Jasic EVO 2.0 200PFC ARC/MMA Welder  Introducing the Evo Arc 200, a cutting-edge digital inverter DC manual welder renowned for its exceptional performance. The Jasic EVO ARC 200 PFC is the uprated version of the popular Jasic PRO ARC series, featuring a new large-format display that is clear to see from a distance, as well as a heavier-duty, more rugged shell casing with aggressive looks. Crafted with advanced technology, this resilient machine caters to a diverse array of applications, making it indispensable for precise welding across various materials. The Evo Arc 200 enhances the machine's duty cycle by boasting a unique electrical structure and air passage design, significantly elevating its reliability. Moreover, incorporating the ClearVision display provides operators with comprehensive and informative data, enhancing the welding process experience. Experience unparalleled welding proficiency with the Evo Arc 200, where innovation meets durability for seamless welding operations across various materials. ClearVision technology Adaptable wide input voltage range Flexible remote control solutions. Smart DC lift TIG. Anti stick, adjustable hot start and arc force. Generator friendly. Auto sleep mode for improved energy efficiency. Fan on demand. Voltage reduction device for improved safety. Overcurrent and overheat protection. Supplied with a durable protective case and MMA lead set with twist type electrode holder. Runs from 110 and 230V power supplies Latest Features Following extensive research and development, the EVO Arc 200 PFC (EA-200) Inverter Welder emerges with various innovative features. Among its highlights is the Intelligent Synergic Control, which facilitates hassle-free operation and setup through pre-programmed electrode size settings. Users benefit from a convenient selection option for electrode sizes, streamlining the welding process. The inclusion of Smart Lift TIG technology ensures precise control of short circuit current at ignition, effectively preventing tungsten contamination. Additionally, the system swiftly detects accidental short circuits, ensuring uninterrupted welding operations. The arc length cut-off feature eliminates undesirable arc wandering, enhancing welding precision. Efficiency is further enhanced with a sleep function designed to conserve power during idle periods. Upon activation with a simple push of a button, the machine swiftly reawakens, primed for the next welding task. Additionally, a fan-on-demand mechanism optimises working temperature by activating when necessary and deactivating when idle, reducing energy consumption and noise emissions. Integrating a voltage reduction device (VRD) in the Jasic EVO Arc 200 PFC (EA-200) remains paramount for safety. This device mitigates potential hazards by lowering the open circuit voltage (OCV) to a safer level, thus minimising risks associated with accidental contact with the welding holder or electrode during machine operation. Furthermore, built-in overcurrent and overheat protection mechanisms safeguard the machine from potential damage, ensuring prolonged reliability and performance. The Jasic EVO Arc 200 PFC (EA-200) is a testament to safety and efficiency, offering a comprehensive solution for welding tasks with unmatched precision and reliability.

Jasic EVO Arc 160 PFC MMA (Stick) Welder 110/230V

Jasic EVO ARC 160 Inverter Welding Machine The Jasic EVO ARC 160 PFC (EA-160) is basically the beefed-up version of the wildly popular Jasic PRO Arc series. It's got a big new display that you can actually read from across the room, plus a tougher shell that looks pretty mean too. These EVO ARC machines come with PFC built in, which helps save on energy costs. They're also smart enough to work out what voltage you've got—plug them into either 110V or 230V, and they'll even run off generators. What's really handy is they'll handle anything from 96V right up to 265V, so you can use long extension leads without worrying about voltage drop causing problems. The ClearVision screen is a nice touch—it's a high-def LED display angled so you can see it properly without straining your neck. Despite all these features, the machine's surprisingly light and easy to move around. You can flip between MMA mode and Smart Lift TIG mode with just one button. Comes with a solid protective case and MMA lead included. Why we love the Jasic EVO 2.0 160 PFC Arc/MMA Welder ClearVision technology Adaptable wide input voltage range Flexible remote control solutions. Smart DC lift TIG. Anti stick, adjustable hot start and arc force. Generator friendly. Auto sleep mode for greater energy efficiency. Fan cooling on demand Voltage reduction device(VDR) for improved safety. Overcurrent and overheat protection.

Jasic EVO AC/DC ET200P PFC 110/230V Pulse TIG Welder

Jasic EVO 2.0 AC/DC TIG200P Air Cooled Welder – Precision, Performance, and Versatility The Jasic EVO 2.0 AC/DC TIG200P Air Cooled Welder delivers professional-grade welding performance with unmatched precision and flexibility. Engineered for both AC and DC TIG applications, this welder is ideal for aluminium, stainless steel, mild steel, and other metals, making it perfect for fabrication, maintenance, and professional workshop use. Equipped with ClearVision technology and intelligent synergic control, setup and welding have never been easier. The welder offers multiple AC waveforms, mixed waveform frequency and duty cycle control, and a Welding Engineer Mode for in-depth parameter adjustments. Smart features like optimized gas consumption, generator compatibility, and auto sleep mode ensure efficiency, while fan-on-demand reduces energy use and noise. Safety and durability are at the core, with a Voltage Reduction Device (VRD), overcurrent and overheat protection. The EVO 2.0 also supports optional upgrades like a TFT digital screen and flexible remote control solutions. Backed by a 5-year warranty, the Jasic EVO 2.0 TIG200P offers reliable, high-quality welding performance you can count on every time. Key Features 5 Year Warranty ClearVision technology Intelligent synergic control Adaptable wide input voltage range Welding engineer mode: Allows access to the sub-menu to change more in-depth parameters. Multiple AC waveforms available Mixed waveform, mixed waveform frequency & mixed waveform duty cycle. Smart gas for optimised shielding gas consumption. Flexible remote control solutions. Generator friendly. Auto sleep mode for improved energy efficiency. Fan on demand. Voltage reduction device (VRD) Overcurrent and overheat protection. An optional TFT screen is available as an upgrade 

Jasic EVO EM250 PFC MIG Welder Package On Trolley 110/230V

Jasic EVO MIG 250 CT Inverter Welder The EVO MIG 250 CT from Jasic features a rugged and ergonomic design that not only looks the part but is designed to make welding more efficient and straightforward, from its slanted control panel, which provides enhanced visibility with ClearVision technology offering a crisp and clear reading even in direct sunlight to the sloped front grill that provides a perfect balance between heat dissipation and ingress protection. The built-in Intelligent Synergic Control enables you to set up your welder faster than ever before. With built-in synergic programs, all you have to do is input some basic information, and the machine does the rest for you, picking the optimal settings for your weld. Whether you are MIG, TIG or MMA welding, the Jasic EVO MIG 250 CT PFC Inverter has you covered with a High arc ignition response rate for excellent consistency, delivering 60+ manual weld spots per minute for ultimate MIG spot welding performance. The trigger-controlled DC Lift Arc ignition enables the arc to be started easily by touching the tungsten to the workpiece and lifting it back up. This stops the tungsten from sticking to the workpiece and breaking the tip. It also features Anti-Stick technology, Arc Force, and Hot Start functionalities designed to improve weld quality and ease of use whilst MMA welding. Not only is it designed to streamline welding, but it is also designed to be energy-efficient, with features such as auto-sleep mode and an energy-saving smart fan, both of which are designed to save power and reduce energy costs. The Jasic EVO MIG 250 CT PFC Inverter welder has you covered, offering a wide range of features and technical specifications. Have a look at the list below to find out more. What's Included in the Kit: Jasic EVO MIG 250 CT PFC Inverter Trolley MIG Torch 4m Regulator Hose Earth Lead Why We Love The New Jasic Evo 2.0 MIG250 PFC Dual Voltage Package  ClearVision technology Intelligent synergic control Adaptable wide input voltage range: 110/230V Welding engineer mode allows more in-depth parameter changes Smart DC lift TIG Consistent and efficient MIG spot welding performance. Flexible remote control solutions. Generator friendly. Auto sleep mode for improved energy efficiency. Compatible with digital control MIG torch, as well as spool gun. LED light inside wire feed cabinet for improved vision. Cooling fan on demand. Voltage reduction device for improved safety. Overcurrent and overheat protection.

Jasic Evo MIG EM200C PFC Compact MIG Welder Package 110/230V

Jasic EVO MIG 200 PFC Inverter Welder The Jasic EVO MIG 200 PFC Inverter Welder features a rugged and ergonomic design. The handle elevates the overall aesthetic of the welder whilst also providing a comfortable and firm grip that is glove-friendly. The control panel features a 45 ° angle for enhanced visibility even under direct sunlight, and the front grille also features a slanted design that offers a perfect balance between heat dissipation and ingress protection. Featuring the latest technology, the 200 PFC welder comes with Intelligent Synergic Control, which means that setting up for a weld has never been faster. Input the correct information, and the machine will do the rest. It will pick the optimal settings for your weld. Built-in power factor correction improves the overall efficiency and enables compatibility with AVR generators. Welding engineer mode provides access to adjust in-depth parameters, allowing for greater freedom in parameter customisation. With features such as auto-sleep mode and an energy-saving smart fan, you can be assured that this welder is not only a great choice but also a sustainable one. The auto sleep mode saves energy by automatically putting the device into sleep mode after 10 minutes of inactivity, and the energy-saving smart fan helps reduce energy costs and conserve power. What's Included in the Kit: Jasic EVO MIG 200 PFC Inverter MIG Torch 3m Regulator Hose Earth Lead Why We Love The New Jasic Evo MIG 200 PFC Inverter Welder  Rugged, ergonomic design ClearVision technology Intelligent synergic control Adaptable wide voltage range Welding engineer mode Smart Lift TIG Consistent and efficient MIG spot welding performance Flexible remote control solutions (optional) Power factor correction (PFC), generator-friendly Quick factory reset; auto sleep mode Compatible with MIG digital torch and spool gun LED inside wire feed unit; handy accessory storage slot ABAP: Active Balancing Air Passage Fan on demand Voltage Reduction Device (VRD) Key power electronic component protection Overcurrent and overheat protection  

Jasic EVO TIG ET200P PFC Pulse Air-Cooled DC TIG Welder Package 110/230V

Jasic EVO 2.0 TIG 200P DC TIG Welder The Jasic EVO 2.0 TIG 200P is a next-generation DC TIG inverter built for welders who demand precision, reliability, and modern control in a compact, industrial package. Part of the new EVO 2.0 series, this machine combines a rugged, ergonomic design with an intuitive human-machine interface, delivering outstanding performance in workshop and site environments alike. Engineered with Dash-Arc high-frequency ignition and Smart Lift-TIG technology, the TIG 200P delivers fast, reliable arc starts with excellent control. Full DC pulse TIG functionality allows fine adjustment of pulse parameters, helping you manage heat input, improve bead appearance, and achieve consistent results on thin or heat-sensitive materials. Smart Gas technology further enhances efficiency by automatically optimising post-flow gas times, reducing waste without compromising weld quality. Designed for real-world conditions, the EVO 2.0 TIG 200P features power factor correction (PFC) for improved energy efficiency and generator compatibility, along with a wide input voltage range for dependable performance wherever you’re working. ABAP (Active Balancing Air Passage) cooling and a fan-on-demand system protect key components while reducing noise and power consumption, supported by auto sleep mode for maximum efficiency. Safety and durability are built in as standard, with VRD, overcurrent and overheat protection, and comprehensive electronic safeguarding. Optional remote control solutions provide added flexibility, while quick factory reset ensures simple recovery from incorrect settings. Supplied complete with TIG torch, earth lead, gas hose, and regulator, the EVO 2.0 TIG 200P is ready to work straight out of the box. Backed by a 5-year warranty, the Jasic EVO 2.0 TIG 200P DC TIG Welder delivers modern technology, dependable performance, and long-term peace of mind—engineered to perform today and built to last. Key Features 5 Years Warranty  Rugged, robust, and industrial look with ergonomic design Clear Vision technology Adaptable wide voltage range Dash-Arc Smart Lift TIG Full-featured DC pulse TIG parameters Flexible remote control solutions (Optional) Power factor correction (PFC), Generator friendly Quick factory reset; auto sleep mode ABAP: Active Balancing Air Passage Smart Gas for optimised shielding gas consumption Fan cooling on demand Voltage Reduction Device (VRD) Key power electronic component protection Over current and overheat protection Complete with tig torch, earth lead, gas hose and regulator

Starparts Titanium 250 MB25 Mig Torch 4mtr Euro

Starparts Titanium 250 MIG Welding Torch 5Mtr Length The Starparts Titanium 250 MIG Welding Torch is a robust and high-performance tool, designed to handle medium to heavy-duty welding applications with ease. Engineered for durability and efficiency, this torch is perfect for professional welders who demand reliability and precision in every weld. Key Features: 250A Rating: Built to handle demanding MIG welding tasks with consistent performance. Ergonomic Design: Features a comfortable grip and balanced construction to minimize operator fatigue during extended use. Heavy-Duty Durability: Manufactured with premium materials to withstand tough working environments. Precise Control: Smooth wire feed and responsive trigger action ensure consistent, high-quality results. Versatile Application: Suitable for a variety of welding projects, from industrial fabrication to maintenance work. suits migwire sizes 0.8mm - 1.6mm    Binzel Compatible Will Fit All MIG Machines With A Euro Connector   These are the torches used on Jasic welders in the UK and are made by Wilkinson Star in Manchester 

Stinger V002 Insulated Electrode Holder

Stinger V002 Insulated Electrode Holder The Stinger V002 Insulated Electrode Holder is a premium, heavy-duty electrode holder designed for professional welders who demand superior performance, durability, and safety. With its robust construction and fully insulated design, this electrode holder ensures a secure grip and efficient current transfer, making it ideal for demanding welding applications. Key Features: Heavy-Duty Performance – Engineered for high-amperage welding with reliable current flow. Fully Insulated Design – Enhances safety by preventing accidental contact with live parts. Superior Grip – Strong clamping mechanism ensures a firm hold on electrodes for precise welding. Ergonomic Handle – Comfortable, non-slip grip reduces fatigue during extended use. Durable Construction – Built to withstand tough working conditions and extreme temperatures. Perfect for industrial welding, fabrication, and professional applications, the Stinger V002 Insulated Electrode Holder offers unmatched reliability, safety, and efficiency for serious welders. American Made | Durable | High QualityElectrode Holder For Stick Welding/ SMAWFully InsulatedSilicone Brass95% Copper For Better ConductivityThick Brass Stays Cooler LongerReliable V GripPerfect for Welding Shops, Pipelines & Pipe Fabrication

Stronghand Tools Stronghand Inserta Locking Pliers For 16D Holes

Stronghand Inserta Pliers - Fits All 16mm hole Welding Tables Insert into Ø16 mm for fast hold-down clamping. Mount on the Right Angle Bracket, Riser Block, or Clamping Squares for push down clamping at an elevated height for taller workpieces. The patented rear crank handle allows clamp pressure adjustment while the clamp is in locked position. Use the crank handle to pre-set the clamp opening in repetitious clamping applications

F-Tech Armoflex Flexible Fume Extraction Arm

Armoflex Flexible Fume Extraction Arms For F-Tech Armur & Evo Units 

Jasic JM500P Pulse 500A Seperate Watercooled MIG Welder

Jasic JM500P Pulse 500A MIG Welder The Jasic MIG 500P is a high quality digital MIG/MAG power source. It provides low spatter consistent welding with minimal rework on a wide range of materials. The Jasic MIG 500P provides multi process pulsed MIG, synergic MIG, TIG and MMA options for a wide range of applications KEY FEATURES IGBT multi process inverter Pulsed MIG, MIG/MAG, TIG and DC MMA Synergic or standard operating modes Smart fan and water control Job storage system 4 roll wire feed unit Suitable for 0.8, 1.0, 1.2 and 1.6mm welding wire Easy parameter settings for the operator Synergic curves for common materials & wire diameters Self diagnostic system Encoder feedback control of wire feed system Power & status LED’s Inverter trolley takes full size gas bottle

Fronius FCL10 Torch Coolant - 5Ltr

Fronius FCL10 Torch Coolant – 5 Ltr The Fronius FCL10 Torch Coolant is a high-performance cooling liquid specifically developed for water-cooled MIG, TIG, and plasma welding systems. Designed to maintain optimal operating temperatures, this premium coolant helps extend torch life, improve welding performance, and protect internal cooling components from corrosion and scale build-up. Formulated with advanced anti-corrosion technology, FCL10 provides reliable protection for pumps, brass fittings, copper cables, and torch components while also helping to prevent bacteria formation within the cooling system. The environmentally friendly, biodegradable formula is non-flammable and safe for workshop storage and transport. Suitable for use with Fronius cooling units and compatible welding systems including TPS, TPS/i, MagicWave, and TransSteel models. Key Features High-performance coolant for water-cooled welding torches Protects against corrosion, rust, and mineral deposits Helps maximise torch and cooling system lifespan Prevents bacteria build-up within the cooling circuit Frost protection down to -10°C Biodegradable, non-flammable formula Convenient 5-litre container Genuine Fronius product Specifications Product: Fronius FCL10 Cooling Liquid Capacity: 5 Litres Colour: Green Part Number: 40,0009,0180 Application: MIG, TIG & Plasma water-cooled systems Important Information   Fronius recommends not mixing FCL10 with other coolants to maintain optimal performance and system protection.

Weld Star Weldstar Infinium Multi-Process Pulse Welder 4 In 1 200A MIG, AC/DC TIG & MMA

Weld Star 4 in 1 Multi Process Welder 200 Amp Package The Weld Star Infinium inverter multi process machine has been designed to incorporate the most advanced features and technology offering the operator a user friendly interface via the 5”LCD screen. Advanced IGBT multi-process inverter technology which is compact andlightweight at only 20KG PFC technology offering multiple advantages such as energy efficiencyand wide range input voltage from 95Vac – 265Vac Generator friendly Automatic dual voltage input detection Smart fan – reduces power consumption and intake of dust and fumes IP23 protection Built to EN-60974-1 and is fully compliant with the European CommissionRegulation 2019/1784, CE and UKCA With synergic MIG/MAG, welding parameters can be automatically selectedbased on material thickness and voltage with synergic curves for commonmaterials and wires Built in TIG welding features such as HF or Lift TIG, pre/post flow gastimes, 2T/4T, slope up/down and pulse, all to ensure excellent TIG weldingcharacteristics in both AC and DC Smart TIG function with advanced TIG welding features such as multi-wave,Q start and hybrid TIG, whilst still maintaining ease of set up for the user DC and AC MMA suitable for a wide range of electrodes Advanced MMA features such as pulse and automatic current regulationbased on electrode diameter Built in hot start arc ignition function which ensures excellent arc ignition inMMA for easier and more reliable arc starting with built in self adaptive arcforce technology which maintains the optimum MMA arc conditions duringoperation even with long welding cables In-built VRD (MMA and TIG mode only) Ability to save up to 10 stored programmes for quick set up Advanced error code menu for ease of fault and troubleshooting diagnosis Panel mounted USB connection for quick and easy firmware updates

Stealth XG Helmet Spare Outer Cover Lens Pack Of 10

Outer Lenses in a pack of 10 for the Stealth XG PAPR Auto Darkening Welding Helmet  the outer lens protects the auto-darkening filter from damage, welding spatter and dust in everyday use

Stealth XG Spare Inner Lens Pack Of 5

Stealth XG Spare Inner Lens Pack Of 5 Inner Lenses in a pack of 10 for the Stealth XG PAPR Auto Darkening Welding Helmet Protects the inside of the auto darkening filter unit 

Jasic Foot Control for JT-202A, JT-202D, JT-300P & JT-315MWD

Jasic Footpedal For JT202, JT-300P & JT315MWD Machines Jasic footswitch for use with Jasic 202/300P/315MWD welders, providing variable amperage control whilst welding.The foot pedal works like a car's accelerator: the farther you depress it, the more power you get from the machine. This is very useful when welding aluminium, as you need more heat to start creating the weld pool and less at the end of the weld, since the material will have heated up considerably. This foot pedal is compatible with the following models: JT-202 JT-300P JT-315MWD

TIG Aesthetics By TICON Silicone TIG Trailing Shield

Why we love the trailing shield from TIG Aesthetics:  TIG Aesthetics and Ticon Industries are eager to announce the latest Innovation in our TIG welding lineup! The TIG Aesthetics Trailing Shield. It is the Ultimate solution for welding aerospace grade metals where an inert environment is required. Manufactured from high temperature silicone, the Trailing Shield withstands the heat absorbed by any #16 or 1" welding cup and will hold its structural integrity to 100+ amp welds. The Trailing Shield also includes a built in drag bar on the tail of the shield to assist in the prevention of direct heated material contact. -please note that the silicone body is meant to hover above and not make contact with the actual weld seam-  Our proven, multi-layer screen diffuser combined with the shower head diffuser fitting integrate seamlessly with the silicone while providing additional rigidity to the body of the shield; providing excellent argon diffusion to the weldment. The reinforced screen diffuser allows for the radius to be adjusted by slightly bending the stainless steel diffuser.  User setup tips and tricks: Included hose retention tab is designed to snap on to the back cap and align the argon inlet hose perfectly straight into the shield body, ensuring consistent results when manipulating torch angle during the weld process. (we recommend using TIG Aesthetics 6mm Argon Purge line) Recommended gas flow for the Trailing Shield is 15-20 SCFH *dependent on weldment and environment* Ensure a proper setup by running a test pass on some scrap material to solidify personal preference on flow and speed. Included in the TIG Aesthetics Silicone Trailing Shield Kit: Silicone trailer chassis - Red x 1Stainless Steel Mesh Diffuser x 1Titanium Shower Head Diffuser fitting x 1Titanium Hose Retention Tab x 1

Beltit BG10 Airfile Fixed Arm 330mmx10mm

Beltit BG10 Airfile Fixed Arm- 330mmx10mm This is a powerful machine, it has a fixed speed motor but has plenty of power when it is required. The 110V motor can be used on mild steel or for general fabrication work. Dressing out welding spatter or deburring laser cut edges are easy with this handheld air driven sander.   Ideal for use on mild steel and in auto repair or steel fabrication work. For our full range of abrasive finishing systems click here.   BG10 Air Machine Specification: Pneumatic: Beltit BG10 Arm: 330 x 10mm Belt Length: 330mm Belt width: 10mm Weight: 0.3kg Power: 0.8hp   Best Belts: 40 grit: TZ59/40/330X10 60 grit: TZ59/60/330X10 80 grit: TZ59/80/330X10 120 grit: TZ59/120/330X10  

Beltit BG20 Powerfile 110V Fixed 520x20mm

Beltit BG20 Powerfile 110V Fixed Arm (520mmx20mm) The 110V GG20 Beltit Powerfile is a powerful motorised powerfile sander. The handheld sander is ideal for use on mild steel and during general fabrication work. The single speed motor is ideal for dressing out welding spatter or deburring laser cut edges. The BG20 is suitable for many environments; sheet metal fabricators or for light foundry work.   For our full range of abrasive finishing systems click here.   BG20 120V Machine specification: Power supply: Beltit BG 110 volt Arm for belt: 520mm Belt width: 20mm Weight: 2.4kg Power: 570 watt motor   Applications of this machine: Weld and splatter removal, dressing and finishing MIG welds in difficult areas   Best belts for this machine: 40 grit: FX87/40/520X20 60 grit: FX87/60/520X20 80 grit: FX87/80/520X20

Beltit BG20 Powerfile 240V Fixed Arm 520mmx20mm

Beltit BG20 240V Powerfile Fixed arm (520x20mm Arm) The Beltit 240V single speed powerfile is a powerful handheld sander which is good for use on mild steel and general fabrication work. This could be dressing out welding spatter or deburring laser cut edges. A slightly heavier alternative this handheld machine weighs 2.4kg, the power supply is 240V.   For our full range of abrasive finishing systems click here.   BG20 110v Machine Specification: Power supply: Beltit BG 110 volt Arm for belt: 520mm Belt width: 20mm Weight: 2.4kg Power: 570 watt motor   The best belts to use with the Beltit BG20 40 grit: FX87/40/520X20 60 grit: FX87/60/520X20 80 grit: FX87/80/520X20

Beltit BG30 Airfile Fixed Arm 540x30mm

Beltit BG30 Airfile Fixed Arm 540x30mm  A powerful machine with air driven motor, ideal for use on heavy steel and other fabrication work, also ideal for dressing out welding spatter or deburring laser cut edges. The BG30 is ideal for use in sheet metal fabrication and foundry environments. The power capabilities of this are 1100W. For our full range of abrasive finishing systems click here.     Specification: Power: 1100W Arm: 540x30mm Weight: 2.9kg   Applications of this handheld sander: Heavy duty machining Sheet metal fabricators Foundry work  Heavy steel work Grinding Fettling Dressing     

Beltit BG30 Powerfile 110V Fixed 540mmx30mm Arm

Beltit BG30 Powerfile Fixed Arm 540x30mm 110V  A powerful machine with air driven motor, ideal for use on heavy steel and other fabrication work, also ideal for dressing out welding spatter or deburring laser cut edges. The BG30 is ideal for use in sheet metal fabrication and foundry environments. The power capabilities of this are 1100W.  For our full range of abrasive finishing systems click here.     Specification: Power: 1100W Voltage: 110V Arm: 540x30mm Weight: 2.9kg   Applications of this handheld sander: Heavy duty machining Sheet metal fabricators Foundry work  Heavy steel work Grinding Fettling Dressing     

Beltit BG30 Powerfile 240V Fixed 540mmx30mm Arm

Beltit BG30 Powerfile 240V Fixed Arm (540mmx30mm) This Powerfile is a single speed motor, ideal for heavy duty steel and fabrication work, this could be dressing welding spatter or deburring laser cut edges. The BG30 can be used in sheet metal fabrication or foundry environment depending on machine choice. For our full range of abrasive finishing systems click here.     Specification: Power: 1100W Voltage: 240V Arm: 540x30mm Weight: 2.9kg   Applications of this handheld sander: Heavy duty machining Sheet metal fabricators Foundry work  Heavy steel work Grinding Fettling Dressing   

Jasic PT-100 Plasma Torch Retaining Cap 80/120A

Replacement retaining cap for PT-100 plasma torches. Fits Jasic Cut 81machines 

PT-100 Plasma Torch Swirl Ring (Gas Distributor) 80/120A

Jasic PT-100 Plasma Torch 1.4MM Cutting Tip - Pack OF 10

Replacement cutting tips for Jasic Cut81 plasma machines, fits all PT-100 plasma torches 

Jasic PT-100 Plasma Torch Retaining Cap 30/70A

Jasic Cut61 replacement retaining cap, fits all PT-100 plasma torches 

Jasic PT-100 60025 Plasma Torch Swirl Ring (Gas Distributor) 30/70A

Replacement gas swirl ring for PT-100 plasma torchas as fitted to Jasic Cut61 machines 

Starparts PT-100 Plasma Torch Cutting Tips (Jasic Cut61) - Pack OF 10

Starparts PT-100 Plasma Torch Cutting Tips (Jasic Cut61) - Pack OF 10 Unleash the power of precision cutting with the PT-100 Plasma Torch Cutting Tips In A Pack of 10. These tips are standard on the Jasic Cut 61 plasma cutter Engineered for excellence, these cutting tips are your go-to solution for achieving clean, accurate cuts across a variety of materials. With three different sizes included in each pack, you have the versatility to tackle any cutting task with confidence. Key Features: This pack includes 10 high-quality cutting tips, providing you with an extensive supply to keep your plasma torch operating at its best. The ample quantity ensures you're always prepared for your cutting projects, whether you're a professional or a DIY enthusiast. Three Sizes for Precision: The PT-100 Cutting Tips come in three different sizes 1.0, 1.1 & 1.2MM, allowing you to customize your cutting experience based on the material and thickness. Achieve precision cuts every time, whether you're working on intricate designs or heavy-duty projects. Premium Construction: Crafted from top-tier materials, these cutting tips offer exceptional durability and longevity. The robust construction ensures they can withstand the demands of intensive cutting applications, providing reliable performance when you need it most. Efficient Heat Dissipation: The cutting tips are designed for efficient heat dissipation, preventing overheating and ensuring a stable cutting process. This feature enhances the lifespan of the tips and promotes consistent, high-quality cuts. Compatibility: Suitable for a range of plasma torches, these cutting tips offer broad compatibility. Check your torch specifications to ensure a seamless fit and experience the enhanced performance of PT-100 cutting tips. Easy Installation: With user-friendly installation, you can quickly and effortlessly replace your cutting tips, minimizing downtime and maximizing productivity. Spend more time cutting and less time on maintenance with the PT-100 Plasma Torch Cutting Tips. Sizes Available: 1.0MM - Part Code 51246.10 1.1MM - Part Code 51246.11 1.2MM - Part Code 51246.12

Starparts PT-100 Plasma Torch Back Striking Electrode PK Of 5

PT-100 Plasma Torch Back Striking Electrode In A Pack Of 5 Introducing the PT-100 Plasma Torch Back Striking Electrode Pack of 5 – your reliable solution for efficient and precise plasma cutting operations. Designed to meet the demands of professionals and hobbyists alike, these electrodes are crafted with precision and durability in mind. Key Features: High-Quality Construction: The PT-100 Electrodes are crafted from premium materials, ensuring durability and longevity. These electrodes are built to withstand the rigors of demanding plasma cutting applications. Back Striking Design: The unique back striking design enhances the electrode's performance, providing consistent and reliable ignition for your plasma torch. This feature ensures a smooth and uninterrupted cutting process, saving you time and effort. Pack of 5: This package includes a set of five electrodes, giving you an ample supply for your plasma cutting needs. Whether you're a professional workshop or a DIY enthusiast, this pack ensures you have spares on hand for uninterrupted work. Compatibility: The PT-100 Electrodes are compatible with a range of plasma torches, making them a versatile choice for various cutting systems. Check your torch specifications to ensure compatibility. Precision Cutting: Achieve clean and precise cuts with the PT-100 Electrodes. These electrodes are designed to deliver a stable arc, resulting in accurate and smooth cuts across different materials. Easy to Install: The electrodes are easy to install, allowing you to spend more time cutting and less time on maintenance. Follow the straightforward instructions, and you'll be ready to tackle your cutting projects with confidence Will fit all PT-100 plasma torches  Most comonly used on Jasic CUT61 & CUT81 Plasma Machines 

Starparts PT-100 Plasma Torch Cooling Tube For Jasic Cut 61 & Cut 81 Machines

PT-100 Plasma torch cooling tube  Comes with the Jasic Cut 61 & Cut 81 plasma machines 

Starparts PT-100 Plasma Cutting Torch 6Mtr C/W Central Connector

PT-100 Plasma Cutting Torch 6Mtr C/W Central Connector Replacement PT-100 plasma cutting torch, comes as standard with Jasic cut61 60A plasma cutters  will fit any brand of plasma machine which has the central connection socket 

Starparts PT-60 Plasma Torch Double Pointed Spacer Fits Jasic 45A Plasma Torch

PT-60 Plasma Torch Double Pointed Spacer Fits Torches On Jasic 45A Plasma Cutters And Any Machine With A PT-60 Torch 

Starparts PT-60 Plasma Torch Screw On Shield Cup For Jasic Cut 45A Plasma

PT-60 Plasma Torch Screw-On Shield Cup – For Jasic Cut 45A Plasma The PT-60 Plasma Torch Screw-On Shield Cup is a high-quality replacement consumable designed for use with Jasic Cut 45A plasma cutting systems. Engineered for durability and precise fitment, this shield cup helps protect internal torch components from heat, spatter, and debris while maintaining stable cutting performance. The screw-on design ensures secure attachment and easy replacement, making routine maintenance quick and straightforward. Ideal for workshop and site use, this shield cup supports consistent cut quality and extends the service life of your PT-60 torch consumables. Key Features: Compatible with PT-60 plasma torches Suitable for Jasic Cut 45A plasma cutters Screw-on design for secure fit and easy installation Protects torch components from heat and spatter Supports consistent cutting performance Durable construction for extended service life

Starparts PT-60 Plasma Torch Jasic 45A Plasma Swirl Ring Gas Distributor

PT-60 replacement swirl ring "gas distributor" comes with Jasic 45A plasma cutters, fits all PT-60 torches 

Starparts PT-60 Plasma Cutting Tip Fits Jasic Cut 45A Plasma - (Pack Of 10)

Starparts PT-60 Plasma Cutting Tip Fits Jasic Cut 45A Plasma - (Pack Of 10) Replacement tips for the Jasic Cut 45 Plasma Torches  Key Features: Tailored for Jasic Cut 45A Plasma: Specifically crafted to fit Jasic Cut 45A Plasma systems, these cutting tips ensure a perfect match for your equipment. Experience the synergy of compatibility, reliability, and exceptional cutting performance. Pack of 10 for Extended Usage: With 10 high-quality cutting tips in each pack, you'll have an ample supply to keep your plasma cutter running smoothly. Whether you're tackling industrial tasks or personal projects, this pack is your assurance of uninterrupted cutting. Consistent and Clean Cuts: The PT-60 Cutting Tips are engineered for precision, providing consistent and clean cuts across various materials. Enjoy the confidence that comes with achieving professional-grade results in every application. Durable Construction: Built with durability in mind, these cutting tips are constructed from premium materials to withstand the demands of rigorous cutting tasks. Trust in the longevity of your cutting tips for extended usage. Efficient Heat Dissipation: The design of these cutting tips promotes efficient heat dissipation, preventing overheating and ensuring a stable cutting process. This feature enhances the overall lifespan of the tips and maintains cutting quality. Easy to Install: The PT-60 Cutting Tips are designed for hassle-free installation, allowing you to spend more time cutting and less time on maintenance. Keep your workflow seamless and productive with easy-to-replace cutting tips. Upgrade your Jasic Cut 45A Plasma system with the reliability and precision of PT-60 Plasma Cutting Tips. Order your Pack of 10 today and experience the perfect balance of compatibility, durability, and performance in your plasma cutting projects.  

Starparts PT-60 Plasma Electrode Back Striking (Pack Of 5) For Jasic Cut45

PT-60 Plasma Electrode Back Striking – Pack of 5 (For Jasic Cut 45) The PT-60 Plasma Electrode Back Striking is a precision consumable designed for use with Jasic Cut 45 plasma cutting systems. Engineered for durability and consistent performance, these electrodes ensure reliable arc stability and clean cuts in a variety of metalworking applications. Manufactured from high-quality materials, the back striking design helps reduce wear and prolongs the life of your plasma torch, while supporting accurate and efficient cutting. Supplied in a convenient pack of 5, these electrodes provide excellent value for workshops and professional fabrication environments. Key Features:   Compatible with PT-60 plasma torches and Jasic Cut 45 systems Back striking design for improved electrode longevity Ensures stable arc and consistent cutting performance Manufactured from durable, high-quality materials Supplied in a pack of 5 for convenience and cost-effectiveness Ideal for workshop and industrial plasma cutting applications

Starparts PT-60 Plasma Torch 6Mtr C/W Central Connector

PT-60 Hand cutting plasma torch fits Jasic 45A Plasma Cutters (and other brands) Replacement plasma torch for all central connection upto 45A plasma cutters 

Parker Duragrip 360A Spool Gun Euro Fitting 8Mtr

DURAGRIP SPOOL-ON MIG/MAG TORCH RANGE Spool-on guns are compact in design and offer a cost effective solution for low deposition Mig welding and precise control of soft wires SPECS:   Cooling Method -Air-Cooled Rating CO2 - 300A Rating Mixed Gas -270A Wire Size Steel -0.8-1.0mm Wire Size Aluminium -0.8-1.2mm Motor Voltage -24V and 42V Motor Life -1000 Hours Duty Cycle- 35%

EWM Phoenix XQ350 Compact Water-Cooled MIG Welder With Expert Panel

Phoenix XQ350 Compact Water-Cooled MIG Welder With Expert Panel MIG/MAG inverter welding machine, with Expert 2.0 technology, pulse and separate wire feeder. This EWM welder is a decompact, demodular- all round welder with all the characteristics expected of a professional welding machine, included in this package is main machine, drive xq wire feeder, drive XQ HP, wire spool adapter, MIG/MAG welding torch (Water cooled, 4m), Workpiece lead with clamp (70mm^2) Gas hose (2M), pressure regulator, coolant and mains plug. Why we love the EWM Phoenix XQ350 Puls CW EX: MIG/MAG inverter welding machine including Expert XQ 2.0 control, pulse, with separate wire feeder Supplied with: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling and 5 m mains connection lead. Ideal for perfect MIG/MAG weld seams even with long welding leads. Seamless synergic control with one-knob operation. No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works. Has innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld for aluminium. Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium. Fully manual operation for Non Synergic operation where requiried. Suitable for MIG/MAG, MMA welding, TIG welding and gouging. Individually configurable programmes for each welding task (JOB). Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires. Start and end-crater function fully adjustable. Infinitely adjustable arc dynamics (choke effect). Accessories and optional extras fit the flexFit casing system: Parts available to purchase and then fixed to the welding machine using conventional slot nuts. LED information bar: Indicates the current operating status. High efficiency and standby function. Connection capability for remote control and function torch. Easy, tool-free change of welding polarity. Earth fault monitoring (PE protection). IP23 spray water protected. Network connectivity with the ewm Xnet software via an integrated or external gateway is optional. PC interface for PC300 XQ software. The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables. Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355. The price shown includes the following components:   Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Phoenix-XQ350-PULS-DW-EX

EWM Phoenix XQ350 Puls DW EX:  MIG/MAG inverter welding machine, with Expert 2.0 technology, pulse and separate wire feeder. This EWM welder is a decompact, demodular- all round welder with all the characteristics expected of a professional welding machine, included in this package is main machine, drive xq wire feeder, drive XQ HP, wire spool adapter, MIG/MAG welding torch (Water cooled, 4m), Workpiece lead with clamp (70mm^2) Gas hose (2M), pressure regulator, coolant and mains plug.  Why we love the EWM Phoenix XQ350 Puls DW EX: MIG/MAG inverter welding machine including Expert XQ 2.0 control, pulse, with separate wire feeder Supplied with: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling, 8-pole interface for scanner + scanner holder, and 5 m mains connection lead Ideal for perfect MIG/MAG weld seams even with long welding leads Seamless synergic control with one-knob operation No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery.  Has innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld for aluminium Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium Fully manual operation for Non Synergic operation where required Suitable for MIG/MAG, MMA welding, TIG welding and gouging Individually configurable programmes for each welding task (JOB) Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires Start and end-crater function fully adjustable Infinitely adjustable arc dynamics (choke effect) Accessories and optional extras fit the flexFit casing system: Parts available to purchase and then fixed to the welding machine using conventional slot nuts LED information bar: Indicates the current operating status High efficiency and standby function Connection capability for remote control and function torch Easy, tool-free change of welding polarity Earth fault monitoring (PE protection) IP23 spray water protected Network connectivity with the ewm Xnet software via an integrated or external gateway is optional PC interface for PC300 XQ software The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S35

EWM Phoenix XQ400 PULS Seperate Water-Cooled MIG Welder 415V

Phoenix XQ400 PULS Seperate Water-Cooled MIG Welder 415V MIG/MAG inverter welding machine, pulse and separate wire feeder. This EWM welder is a decompact, demodular- all round welder with all the characteristics expected of a professional welding machine, included in this package is main machine, drive xq wire feeder, drive XQ HP, wire spool adapter, MIG/MAG welding torch (Water cooled, 4m), Workpiece lead with clamp (70mm^2) Gas hose (2M), pressure regulator, coolant and mains plug. This machine is not capable of Expert 2.0 technology, it does not have controls on the machine but it is controlled exclusively through the wire feeder selected.  Why we love the EWM Phoenix XQ600 Puls DW: MIG/MAG inverter welding machine including Expert XQ 2.0 control, pulse, with separate wire feeder Supplied with: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling and 5 m mains connection lead Ideal for perfect MIG/MAG weld seams even with long welding leads Seamless synergic control with one-knob operation No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Has innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld for aluminium Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium Fully manual operation for Non Synergic operation where requiried Suitable for MIG/MAG, MMA welding, TIG welding and gouging Individually configurable programmes for each welding task (JOB) Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires Start and end-crater function fully adjustable Infinitely adjustable arc dynamics (choke effect) Accessories and optional extras fit the flexFit casing system: Parts available to purchase and then fixed to the welding machine using conventional slot nuts LED information bar: Indicates the current operating status High efficiency and standby function Connection capability for remote control and function torch Easy, tool-free change of welding polarity Earth fault monitoring (PE protection) IP23 spray water protected Network connectivity with the ewm Xnet software via an integrated or external gateway is optional PC interface for PC300 XQ software The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 The price shown includes the following components:   Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Titan XQ400 Puls Expert Panel Seperate Digital Water-Cooled MIG Welder 415V

Titan XQ400 Puls Seperate Digital Water-Cooled MIG Welder 415V MIG/MAG inverter welding machine with expert XQ 2.0 Control, Pulse and separate wire feeder. This EWM welder is a decompact, all round welder with all the characteristics expected of a professional welder, included in this package is: Drive XQ wire feeder with Drive XQ HP, pivot support for wire feeder, water cooled, 14 pol 1.8m intermediate hose package, wire spool adaptor, MIG torch with OLED screen which is water cooled, has X technology and is 4m in length, workpiece clamp, pressure regulator, coolant and mains plug. Why we love the EWM Titan XQ400 Puls DW EX MIG/MAG inverter welding machine includes Expert XQ 2.0 Control, pulse and separate wire feeder. Equipment Provided: Welding machine with Expert XQ 2.0 Control, including wheel kit with single cylinder bracket, water cooling and 5m mains connection lead Perfect MIG/MAG weld seams even with long welding leads Synergic control with one-knob operation No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld Has Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium Manual setting of welding parameters is available using Non-Synergic operation. Suitable for MIG/MAG, MMA welding, TIG welding and gouging Individually configurable programmes for each welding task (JOB) Start and end-crater functions adjustable Forever adjustable arc dynamics (choke effect) Accessories and optional extras fit with flexFit casing system: Using conventional slot nuts LED information bar: Indicates the current operating status Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires High efficiency and standby function available Connection capability for remote control and function torch No tools needed for change of welding polarity Monitoring of Earth fault available (PE protection) IP23 spray water protected Optional network connectivity with the ewm Xnet software via an integrated or external gateway PC interface for PC300 XQ software The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 The price shown includes the following components:   Titan XQ 400 puls decompact, including all characteristics and welding processes Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Titan XQ 350 Pulse Seperate Watercooled MIG Welder With Expert Panel

EWM Titan XQ 350 Puls DW EX MIG/MAG inverter welding machine with expert XQ 2.0 Control, Pulse and separate wire feeder. This EWM welder is a decompact, all round welder with all the characteristics expected of a professional welder, included in this package is: Drive XQ wire feeder with Drive XQ HP, pivot support for wire feeder, water cooled, 14 pol 1.8m intermediate hose package, wire spool adaptor, MIG torch with OLED screen which is water cooled, has X technology and is 4m in length, workpiece clamp, pressure regulator, coolant and mains plug. The welding machine has intuitive XQ Expert control which allows user to set all parameters easily, switch between processes and procedures such as ForceArc/ForceArc Puls to RootArc/RootArc Puls or Standard/pulse. This Expert machine with OLED screen also features; arc length correction, adjustment of arc dynamics (the choke effect), standby function, kilowatt display and effective arc power for calculating the energy per unit length. Why we love the EWM Titan XQ350 Puls DW EX Perfect for creating MIG/MAG seams, even with long welding leads. Innovative EWM Synergic characteristics- Rootarc XQ/Rootarc PulsXQ, Cold arcXQ/Coldarc PulsXQ, Forcearc/Forcearc PulsXQ, Wiredarc XQ/WiredarcPuls XQ, Puls/Superpuls and Positionweld. Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/Aluminium. Non-synergic operation for manual setting of weld parameters. Also suitable for MMA welding, TIG welding and gouging Adjustable start and end-crater functions Infinitely adjustable arc dynamics (choke effect) flexFit casing system: Many accessory parts and options can be fixed to the welding machine using conventional slot nutse Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumablesg Adjustable hot start current and hot start time Optional network connectivity with the ewm Xnet software via an integrated or external gateway IP23 spray water protected Connection capability for remote control and function torch Energy-saving thanks to high efficiency and standby function Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires Equipment as supplied: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, 1.8Mtr Interconnecting Cables, water cooling and 5m mains connection lead The price shown includes the following components:   Titan XQ 350 puls decompact, including all characteristics and welding processes Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

TIG Aesthetics By Ticon Full Silicone Purge Plug Kit

Why We Love The Ticon Industries Full Purge Kit From Tig Aesthetics  Ticon Industries has teamed up with Tig Aesthetics to offer the ultimate solution for back purging. Manufactured out of high temperature silicone, these plugs can withstand the heat of a weld seam from 1″ away. Each plug comes with a multi layer stainless steel diffuser for eliminating turbulence inside the tube/pipe while maximizing the efficiency of argon consumed. To top it all off, we included our special Ticon touch and included our hyper lightweight titanium 0.5mm wall argon inlet tubes. Included in the Complete Silicone Purge Plug Kit: Exhaust Kit2.5″ Silicone Pipe Plug – Yellow x 23″ Silicone Pipe Plug – Green x 23.5″ Silicone Pipe Plug – Cyan x 24″ Silicone Pipe Plug – Blue x 2 Header Kit1.5″ Silicone Pipe Plug – Blue x 21.88″-2″ Silicone Pipe Plug – Magenta x 2 Turbo Manifold Kit1.25″ Silicone Pipe Plug – Magenta x 21.5″ Silicone Pipe Plug – Blue x 22″ Silicone Pipe Plug – Red x 2 Stainless Steel Mesh Diffuser x 18Titanium Argon Inlet Tubes x 9

Milwaukee M18FSAGV115XPDB-0 Vari-Speed 115MM Angle Grinder

Why WE Love The Milwaukee M18FSAGV115XPDB-0 Angle Grinder The Milwaukee M18 FSAGV115XPDB-0 is an 18V angle grinder, delivering corded performance similar to a 1200W grinder. It has a 5-step speed dial ideal for working with stainless steel and aluminium & for rust and paint removal, allowing for maximum control for every application. Integrates three MILWAUKEE-exclusive technologies - the POWERSTATE brushless motor, REDLITHIUM battery pack, and REDLINK PLUS intelligence hardware and software - which deliver outstanding power, run time, and durability on the jobsite.   Comes supplied as a bare unit (no batteries or charger included).   M18 FSAGV115XPDB-0X Features:  Maximum control for every application - 5-step speed dial ideal for working with stainless steel and aluminium & for rust and paint removal Delivering corded performance similar to a 1200 W grinder RAPIDSTOP for fastest disc brake in less than 2 seconds and best user protection Non-lockable safety paddle switch with line-lock-out function to prevent automatic start up Anti-vibration side handle for lower vibration Integrated FIXTEC system for tool-free wheel change Slim handle design Removable dust screen to prevent debris entrance, prolonging motor life 115 mm keyless guard for great cutting capacity and fast guard adjustment without using a key Integrates three MILWAUKEE-exclusive technologies - the POWERSTATE brushless motor, REDLITHIUM battery pack and REDLINK PLUS intelligence hardware and software - which deliver outstanding power, run time and durability on the jobsite Flexible battery system: works with all MILWAUKEE M18 batteries   M18 FSAGV115XPDB-0X Specification:   Anti kickback protection: Yes  Article Number: 4933478773  Battery pack capacity (Ah): No batteries supplied  Battery type: Li-ion  Brake: Yes  Braking time [s]: < 2  Cutting depth (mm): 28 Disc diameter (mm): 115 Line lock out function: Yes No load speed (rpm): 3500 - 8500  No. of batteries supplied: 0 Soft start function: Yes  Standard equipment: Quick release safety guard, cutting guard clip, AVS side handle, flange, flange nut, spanner, dust screen  Supplied in: HD Box  Switch type: Paddle (Deadman) switch  Voltage (V): 18     What is included:  1x 18V Fuel 115mm Angle Grinder with Paddle Switch (Body Only) 1x HD Box

Ultima TIG-CUT Precision Tungsten Grinding & Cutting System

Ultima TIG-CUT Precision Tungsten Grinding & Cutting System The safe and environmentally friendly way of grinding and cutting your tungsten electrodes in perfect angles and precise length for TIG welding.Like the well-known and well-documented ULTIMA-TIG, the ULTIMA-TIG-CUT grinds your tungsten electrodes, but it also enables you to cut the electrodes in the precise length needed. The grinding and cutting take place in a closed chamber, using liquid to cool the diamond discs and the electrode. In addition, the toxic grinding and cutting dust is collected safely.The high grinding speed combined with liquid cooling of the diamond disc and the electrode ensures an even and polished surface and prevents overheating of the electrode.Ultimate welding results are achieved, using the unique electrode holder which centres the tungsten electrode perfectly. The electrode holder and the Stick-out adjustment ensure a minimum waste of the tungsten electrodes during grinding.The cutting device has multiple adjustment options to ensure the precise length of the electrode tip. You can grind and cut the electrode without removing the electrode from the holder, making handling as easy as possible.The ULTIMA-TIG-CUT lets you produce the exact angle and length of the tungsten electrode needed for any specific welding work, incl. robotic and orbital welding. Set up the grinder and cutter once, and re-produce the same electrode over and over. SpecificationElectrode size: Ø 0.8 – 4 mmMin. length: 15 mm standard (7 mm with special clamps)Angles: 7.5° – 90° grinding angle (equal to 15° – 180° tip angle)Cutting length: 7 – 175 mm tip lengthMotor: 110v 50Hz - 280WSpeed: 8500 rpmGrinding speed: 44 m/secUnit IncludesUnit complete with table, diamond discs and grinding liquidElectrode holderElectrode clamps for Ø1.6, 2.4 and 3.2 mm electrodes for grindingTip clamps for Ø1.6, 2.4 and 3.2 mm electrodes for cutting (Clamps are available for other diameters)

EWM Tetrix XQ 230 Puls AC/DC TIG Welder With Expert Front Panel 3.0 5P

EWM Tetrix XQ230 Puls AC/DC W Expert 5 Pole This highly efficient TIG welder has standby functionality and is the latest generation TIG AC/DC inverter machine, it features TIG AC/DC, TIG DC and TIG pulse, MMA welding, MMA pulse welding, MMA Cel and MMA Cel Pulse. This is a demodular machine which is capable of TIG DC and TIG pulse, MMA welding and MMA Cel Pulse. It also has ActivArc and Spotarc technology.  *This TIG AC/DC pulse welding machine comes with Expert 3.0 control with a 7 inch high resolution graphic display where all parameters can be set and controlled.  TIG Welding: Temperature and speed controlled fan for cooling which reduces contamination and noise emissions because the fan only is on when required. Remote control and function torch connection compatibility. Simple and tool free welding polarity reversal. IP23 splash proof standards. Robust case. Why we love the Tetrix XQ230 Puls AC/DC: Expert 3.0 control with 7 inch screen- easy to see and use. LED information bar to show current status.  Optional connection to network through Wifi or LAN. High capacity cooling system using the 1500 W high performance centrifugal pump with 8 litre coolant tank- this saves money on consumable costs.  High mains voltage tolerance. Generator compatible. Consumables box in the handle.

Parweld Panther MIG Gauntlet

Milwaukee 1.36KG (3LB) Club Hammer

Milwaukee 1.36KG (3LB) Club Hammer SMOOTH & MILLED. 3lbs / 1.36kg club hammer. Duel Face Versatility: Milled face provides additional grip and minimizes movement of face when striking chisels or large nails, the smooth face prevents damage to struck objects. Reinforced Overstrike Protection: Increases durability in the most common failure point. Fiberglass handle with over molded grip: Provides durability with improved grip capacity and comfort. Lanyard Hole: Easily comply with safety regulations working at height.

Fronius TTB 220P G F ML /70°/L65 Universal Parts Flexi TIG Torch Head

The modular construction of the new TIG Multilock welding torches means they can be individually adapted to almost any customer requirements. The torch hosepack can be equipped with the appropriate torch bodies in just a few steps, so it can be adjusted to the welder’s personal preferences as well as the relevant application. The torch bodies are available in various power categories from 160–300 A and with either screw or push-on type gas nozzles. This Is For The TIG Torch Flexi Head Only Torch Handle And Leads NOT Included 

Kemppi MasterTig 235 AC/DC TIG Welder Watercooled Package

Kemppi MasterTig 235 AC/DC TIG welder Water-cooled Package The Kemppi Mastertig range of AC/DC machines has set a new standard for weld quality, usability and power efficiency in AC and DC TIG welding. This machine is designed for professionals. This MIG welding machine is lightweight at only 20kg, and its modular design allows each individual to build a bespoke machine that fits their requirements, including alternative control panels, wireless remote control, or transport cart options.  These machines are stylish, practical and robust enough to be used every day. The Mastertig 235 AC/DC TIG is compact and has lightweight injection-moulded plastic parts (extra robust through the impact bridge protection structures). The TIG torches are flexible and durable, and fit Mastertig machines to maximise welding comfort.  Key Features: Choose from traditional touch-button control panels or a full-colour 7-inch TFT control panel, which includes weld assist and 99 memory channels per process. Weld Assist helps weld accurately and efficiently using the recommended settings.  Easy, quick and convenient coolant filling and cleaning Mastertig transport units, which have floor-level cylinder loading- no requirement to lift any cylinder. Compatible with Flexlite TX TIG torches Foot pedal, on-torch and hand remote controls available Can also connect to the WeldEye cloud service Water-cooled package Other Features in the Mastertig 235 AC/DC TIG welder: Double Pulse - Double Pulse combines alternative pulse cycles to deliver a 30% faster welding speed and a 20% lower heat input. Helping to lower distortion and weld costs. Idea for DC hand welding, and offers a superb weld seam appearance Optima AC - A customised AC TIG waveform that combines the best of the traditional sine and square waveforms - and adds a touch of magic for the optimal AC welding experience. Depending on the application, you are free to choose either sine, square, or Optima AC, the quiet option. MicroTack - this offers fast, accurate tacking with minimal heat input in both DC and AC TIG welding. Making it ideal for multiple, repetitive tacking in thin-sheet applications, where consistency and appearance are vital. MicroTack can be set to 1-5 repeat pulse cycles or continuous cycle mode. The welding current level is set independently, and the arc cycle timeis  selected between 1 and 200ms iTEC - engineered ignition technology for reliable arc starts. Particularly useful with long torch extensions for site welding or for precise thin materials and low-current applications, you can set the variable spark force energy. Auto Pulse - Easy and convenient; the only value to adjust is the welding current. Auto Pulse is ideal for DC current applications.

CK Worldwide CK TL26 Red Superflex Power Cable 3/8" Connection

CK TL26 Red Superflex Power Cable – 3/8" Connection The CK TL26 Red Superflex Power Cable is a high-performance, flexible welding cable designed to deliver maximum power transfer and durability in demanding welding environments. Featuring a 3/8" connection, this cable provides a secure and reliable fit for a wide range of welding machines and torches. Constructed with high-grade copper conductors, the Superflex cable offers exceptional conductivity while maintaining superior flexibility — even in cold or confined working conditions. The durable red rubber insulation provides excellent resistance to heat, oil, abrasion, and mechanical wear, ensuring long service life and consistent performance. Ideal for professional welders, fabrication shops, and industrial settings, the CK TL26 Superflex Power Cable combines strength, flexibility, and reliability for optimum welding efficiency. Key Features:   High-performance Superflex cable – provides maximum flexibility and power transfer 3/8" secure connection – compatible with a wide range of welding torches and machines High-quality copper conductors – ensure excellent electrical conductivity Durable red rubber insulation – resistant to heat, oil, and abrasion Professional-grade build – designed for heavy-duty industrial and workshop use

Bessey Tools Bessey All Steel GS Classix Screw F Clamp

Bessey GS Classix All Steel Screw F Clamp Robust, Reliable Clamping Power for Everyday Workshop Use The Bessey GS Classix Screw F Clamp delivers dependable, high-strength clamping performance in a durable and ergonomic design. Engineered for demanding fabrication, welding, woodworking, and general workshop applications, this versatile clamp is constructed from fully tempered steel, providing excellent resilience, wear resistance, and long-lasting service life. With a clamping force of up to 5000N, the GS Classix ensures secure, slip-free holding for a wide range of materials and projects. Its fixed jaw and sliding arm are built for precision and strength, while the tommy bar handle allows easy, controlled application of clamping pressure without excessive effort. Key Features: High Clamping Force – Up to 5000N Delivers strong, secure clamping pressure ideal for demanding fabrication or assembly tasks. All-Steel Construction Fixed jaw and sliding arm are made from fully tempered steel for maximum strength and long service life under heavy use. Durable Surface Finish Zinc-coated parts resist rust and wear, even in tough shop conditions. Tommy Bar Handle Classic sliding pin design offers simple and efficient torque transfer, even in tight spaces. Ribbed Profile Rail Provides enhanced stability and helps prevent slippage under pressure. Non-Slip Pressure Pad Swivelling pressure pad adjusts to uneven surfaces and materials, enhancing versatility and grip. Technical Specifications (Typical Range): Clamping Force: Up to 5000N Clamping Capacity: Various sizes available (e.g. 200mm, 300mm, 500mm etc.) Throat Depth: Typically 100mm Material: Tempered steel Handle Type: Tommy bar Rail Profile: Ribbed for extra grip and alignment Ideal For: Welding and fabrication setups Joinery and woodworking Assembly and maintenance tasks Metal and plastic work Workshop and industrial use Why Choose the Bessey GS Classix? Backed by Bessey’s reputation for German engineering and quality, the GS Classix series combines affordability with exceptional performance and durability. Whether you're clamping during tack welding, gluing in carpentry, or holding components in place during assembly, this clamp offers reliable grip, easy handling, and rugged construction—making it a staple tool for professionals and DIY users alike.

Hypertherm 220990 Powermax 105 Plasma Nozzle PK Of 5

Product description Hypertherm Powermax 105 Max 100 Amp Nozzle For Duramax 105 Plasma Torch Supplied in a Pack Of 5

Hypertherm 220819 Powermax 65/85 65A Nozzle Pkt Of 5

Product description Genuine Hypertherm 220819 65amp cutting nozzle used on the powermax 65, 85 and 105 for handheld and mechanzied plasma cutting, Packed In 5's

Hypertherm 220817 Powermax 65/85 Shield

Product description Genuine Hypertherm shield for Mechanized(not hand cut)Powermax 65-85 Machines 

Hypertherm 220816 Powermax 85 Nozzle Pkt Of 5

Product description Genuine hypertherm powermax 85 hand and machine plasma cutting nozzle 85 amp

Hypertherm 220671 Powermax 45 Nozzle Pkt Of 5

Hypertherm 220671 Powermax 45 Nozzle – Pack of 5 Genuine Consumables Maintain outstanding cutting performance with this genuine Hypertherm 220671 Nozzle Pack. Designed for use with Hypertherm Powermax® 45 plasma cutting systems fitted with T45v and T45m torches, these 45A nozzles deliver precise arc control, clean cuts, and long consumable life for professional fabrication, maintenance, and industrial applications. Manufactured to Hypertherm's exacting standards, these OEM replacement nozzles provide consistent cut quality while helping to maximise torch performance and reduce downtime. Supplied in a convenient pack of five, they're ideal for workshops that require a reliable stock of genuine plasma cutting consumables. Key Features: Genuine Hypertherm OEM consumables Manufacturer Part Number: 220671 Pack of 5 cutting nozzles Rated for 45A plasma cutting applications Delivers clean, accurate cuts with excellent arc stability Designed for extended consumable life and consistent performance Ideal for professional fabrication, maintenance, and production environments Compatibility: Hypertherm Powermax® 45 T45v Hand Torch T45m Machine Torch Specifications: Part Number: 220671 Product Type: Plasma Cutting Nozzle Amperage: 45A (15–45A operating range) Quantity: 5 Nozzles Genuine Hypertherm replacement consumables

Hypertherm 220669 Powermax 45 Electrode Pkt Of 5

Hypertherm 220669 Powermax 45 Electrode Pkt Of 5 The electrode is one of the main replacement components in the plasma cutting torch and should be inspected and changed periodically as required 

Hypertherm Fine Cut Nozzle Powermax 45/65/85 Pk Of 5 220930

Hypertherm 220930 Powermax 65/85 Fine Cut Nozzle – Pack of 5 Enhance the precision of your plasma cutting with the Hypertherm 220930 Fine Cut Nozzle, specially designed for Powermax 45XP, 65 and 85 systems. This genuine OEM nozzle delivers superior cut quality on thin materials, producing cleaner edges, tighter kerfs, and minimal dross — perfect for detailed work and fine-feature cuts. Key Features: Compatible with Powermax 65 & Powermax 85: Designed for seamless integration and optimal performance. Fine Cut Precision: Ideal for thin metals and intricate cutting jobs requiring accuracy and detail. Reduced Dross & Narrower Kerf: Minimizes post-cut cleanup and material waste. Durable OEM Quality: Manufactured by Hypertherm for consistent performance and longer consumable life. Pack of 5: Convenient multi-pack for regular use and stocking spares. Whether you're in fabrication, automotive repair, or artistic metalworking, the 220930 Fine Cut Nozzle is your go-to choice for high-quality, precise cuts on thinner materials.

Hypertherm Powermax 45XP Plasma Torch Retaining Cap

Product description. Replacement Retaining cap for consistency of cut and long life buy the Hypertherm Powermax 45XP

Hypertherm Powermax 45XP Plasma Torch Cutting Shield 220818

Hypertherm 220818 Cutting Shield for Powermax 45XP Protect your torch and maintain cut quality with the Hypertherm 220818 Cutting Shield, designed for the Powermax 45XP plasma cutting system. This accessory helps stabilize the arc during drag-style cutting and shields the nozzle from contact with the workpiece — ideal for high-speed, low-clearance applications. Key Features: Compatible With Powermax 45XP: Engineered to fit seamlessly with the Powermax 45XP torch head. Arc Stabilization: Helps maintain consistent arc height and reduces dross by keeping the nozzle from contacting the work surface. Durable Design: Crafted from robust materials to withstand high heat, sparks, and abrasive environments. Easy to Install & Replace: Simple mounting design lets you install or swap shields quickly, minimizing downtime. Drag-Cutting Capability: Enables drag-style cutting (sliding the shield across the work surface), helpful for tight corners and tight-tolerance jobs. Hypertherm 220818 Cutting Shield For use with Powermax 45XP/65/85/105

Hypertherm Powermax 45XP Plasma Torch Electrode Pack Of 5

Product Description The Hypertherm Powermax 45XP Electrode (Pack of 5) offers premium performance and reliability for your plasma cutting needs. Crafted with precision and using high-quality materials, this electrode is designed to deliver consistent arc stability, long life, and clean cuts—even in tough industrial applications. Key Features & Benefits: High Durability & Longevity Each electrode is manufactured from high-grade copper alloy, optimized for thermal and electrical conductivity. This ensures the electrode can endure prolonged use and resist degradation under intense conditions. Consistent Arc Quality These electrodes maintain a stable arc, which contributes to cleaner cuts, reduced dross, and less secondary finishing. Reliable performance helps increase throughput and reduce waste. Optimized for Powermax 45XP Designed specifically for use with Hypertherm’s Powermax 45XP plasma cutting system, these electrodes align perfectly with your torch’s geometry and power requirements. That compatibility helps ensure optimum cutting speeds and precision. Ease of Replacement The electrode design allows for quick swaps in the field. Minimizing downtime is critical in industrial and fabrication settings, and this pack-of-5 supply gives you on‑hand spares ready to go. Cost-Effective Pack Solution Buying in a 5-pack offers cost savings over buying singles, giving you better value and ensuring you always have spares available. Technical Specifications (Typical / Approximate) SpecificationValue / Range Compatible Torch Hypertherm Powermax 45XP Material High-conductivity copper alloy Pack Quantity 5 electrodes Part / Model Number 220842 (or equivalent) Operating Environment Industrial, workshop, fabrication, sheet and plate cutting Suitable for the following models: Powermax 45XP Powermax 65 Powermax 85 Powermax 105   * Supplied In A pack of 5  

Hypertherm 220941 Powermax 45XP Plasma Torch Nozzle Pack Of 5

Hypertherm 220941 Powermax 45XP Plasma Torch Nozzle – Pack of 5 Keep your plasma cutting system performing at its best with the Hypertherm 220941 Nozzle Pack, designed specifically for the Powermax 45XP. These genuine OEM nozzles ensure precision cuts, consistent arc quality, and extended consumable life — all essential for maintaining productivity in demanding metal fabrication environments. Key Features: Compatible with Powermax 45XP: Engineered for perfect fit and performance with the Powermax 45XP plasma torch. Precision Cutting: Delivers narrow kerf, clean edges, and high cut quality across a wide range of metals. Durable Construction: Made from high-quality materials to withstand intense heat and prolong service life. Pack of 5: Convenient multi-pack for workshop use or spares inventory. OEM Quality: Genuine Hypertherm product ensures optimal system performance and reliability. Ideal for professionals who demand consistent results, the 220941 nozzle is an essential consumable for anyone using the Powermax 45XP in automotive, metalworking, HVAC, or fabrication industries. * Supplied In A Pack Of 5

Hypertherm Duramax LT Finecut Nozzle 15-30A

Product description   Hypertherm Duramax LT Finecut Nozzle With Operating Range Of 15-30A  

Hypertherm Duramax 75 Degree Hand Torch For Powermax 65/85/105

Product description   Hypertherm Duramax  hand cutting plasma torch for Powermax 65, 85, 105 plasma cutter, part number 059473.Designed for durability and reliability with Spring Start™ technology. Duramax torches are available in two hand torch styles, two machine torch styles and three robotic torch styles and can be used for applications up to 105 amps.   75 degree head, used in plasma cutting and gouging applications, including quick fit connector.All Torch Lengths are supplied without consumables.

Hypertherm Duramax 15 Degree Hand Torch For Powermax 65/85/105

Hypertherm Replacement Duramax hand cut plasma torch for Powermax 65, 85, 105 plasma cutter, with 15 degree head  Hypertherm duramax plasma cutting torches are fitted with a snap in quick connector for easy install and removal. Designed for durability and reliability with Spring Start™ technology. Duramax torches are available in two hand torch styles, two machine torch styles and three robotic torch styles and can be used for applications up to 105 amps.   This torch has a 15 degree head , used in plasma cutting and gouging applications, including quick fit connector, available in 3 lengths supplied without consumables. 7.6Mtr   part number 059470 15.2Mtr part number 059471 22.8Mtr part number 059472   All torch lengths are supplied without consumables

Hypertherm Duramax Lock 75 Degree Hand Torch For Powermax 45 XP

Product description Hypertherm® Duramax™ Lock Hand Torch Assembly features 75 deg head.Torch is compatible with Powermax45 XP.Does not include consumables. Available In 6.1Mtr & 15.2Mtr Lengths

Hypertherm Durmax LT Hand Torch for Powermax 30XP - 4.6m

Hypertherm Powermax 30 xp plasma cutting torch package Duramax LT torch 428174 4.6 metre long 75 degree neck Rugged manufacture design to withstand impact & resist heat Use Duramax torch consumables for extended life

Hypertherm Air T30 Plasma Hand Torch 4.5Mtr

Product description AIR T30 Replacement hand torch assembly with 4.5 m (15 foot) lead For use with the Powermax30® AIR  

Ultima / Neutra Replacement Tungsten Grinder Liquid

Ultima & Neutra Replacement Coolant Liquid 250ML For Tungsten Grinder Machines

Inelco Sump Bottle For Ultima Tungsten Grinders Complete With Liquid

Inelco Sump Bottle for Ultima Tungsten Grinders (Complete with Liquid) – Clean, Efficient Grinding Support The Inelco Sump Bottle for Ultima Tungsten Grinders is an essential accessory designed to maintain optimal performance and cleanliness during tungsten electrode grinding. Supplied complete with liquid, it ensures effective cooling and efficient collection of grinding residue, helping to extend the life of both the electrode and grinding equipment. Specifically engineered for compatibility with Inelco Ultima tungsten grinders, this sump bottle supports a clean and controlled grinding process by capturing particles and reducing airborne contaminants. The integrated liquid system aids in cooling the electrode during grinding, resulting in improved precision and a higher-quality finish. Easy to install and replace, it provides a convenient solution for maintaining a safe and tidy workspace, particularly in professional welding environments where accuracy and cleanliness are critical. Key Features: Designed for use with Inelco Ultima tungsten grinders Supplied complete with liquid for immediate use Helps cool electrodes during grinding Efficiently collects grinding residue and particles Supports cleaner, safer working conditions Simple installation and maintenance