Weld Aid Lube Matic Wire Kleener & Lubricant

WELD AID LUBE-MATIC WIRE KLEENER AND LUBRICANT A metal container of lube-matic wire kleener and lubricant (Approx 120ml).  This solution is used to re-lubricate the lube-matic black pads, which, when used helps to feed all mild steel, fabricated and core wires.  The lube-matic solution cuts rust and reduces wire drag by up to 60% to ensure smooth wire feeding through the MIG torch liner and contact tip.   PLEASE NOTE:  The black lube-matic pads are not suitable for use with Aluminium MIG wire (Red pads required for this).  For best results with steel wire, use the red pad for optimum cleaning, followed by these black pads for further cleaning and lubrication.  Pads are available separately

Weld Star Weldstar A15 ER70S-2 Mild Steel TIG Wire 5KG

Features and Applications Micro-alloyed steel, triple de-oxidised (Ti, Al, Zr) suitable for the welding of C-Mn and low-alloy steels. Ideal for use on greasy and oxidised surfaces subsequent to any coating processes. (i.e. galvanised steel) Works well at low temperatures. Typically used on tanks, containers, car industry, structural work, household appliances, pipelines, boilers, naval & petrochemical sectors etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A210, A234 S355J2, S380N, P235GH, GS 45, P295GH, P355GH, S355N** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 2Ti AWS A5.18 - ER 70S-2   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.06 0.60 1.20 <0.020 <0.020 <0.25             Cr% Ni% Mo% Al% V% Zr+Ti% <0.10 <0.10 <0.050 0.100 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 560 MPa   Yield Strength 480 MPa   Elongation 24%   Impact Strength 50 J   Test Temperature -30ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  

Weld Star Weldstar Corten ER80S-G TIG Filler Wire 5KG

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S235JRW, S235J2G3 ; Patinax 37, Alcodur50, Koralpin 52, ; S355J2G3Cu, 9CrNiCuP3-2-4 ; Corten A - B1 ; TsT52.3, S355K2W** Illustrative, not exhaustive list   Standards EN ISO 636-A - W Z3Ni1 AWS A5.28 - ER 80S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.80 1.40 <0.020 <0.020 <0.40             Cr% Ni% Mo% Al% V% Zr+Ti% 0.25 0.80 <0.05 <0.200 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 630 MPa   Yield Strength 550 MPa   Elongation 22%   Impact Strength 60 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star ER5556 AlMg5Mn Aluminium TIG Filler Wire 2.5KG

Product Overview The Weld Star ER5556 AlMg5Mn Aluminium TIG Filler Wire 2.5KG is a high-strength aluminium filler metal designed for TIG welding of aluminium-magnesium alloys. Manufactured to deliver reliable weld quality and consistent mechanical performance, ER5556 filler wire is widely used in fabrication where higher weld strength and good corrosion resistance are required. This filler wire contains approximately 5% magnesium with manganese additions, providing strong weld deposits with excellent toughness and resistance to corrosion, particularly in marine and outdoor environments. Supplied in a convenient 2.5 kg pack of TIG rods, it is suitable for both workshop fabrication and production welding applications.   Typical Base Materials 5xxx alloys, such as AlMg4.5Mn, AlMg5, AlMg5Mn, AlMg2.7Mn, AlMgSi1* * Illustrative, not exhaustive list   Standards EN ISO 18273 - S Al 5556 (AlMg5Mn1Ti) / Al5556A (AlMg5Mn) AWS A5.10 - ER 5556 / ER 5556A

Furick WP9/20 Pink Ceramic Cups Collet Body Mount

Furick WP9/20 Pink Ceramic Cups – Collet Body Mount Torch Compatibility: WP9 / WP20 / WP25 Mount Style: Standard Collet Body (non-gas lens) Material: High-strength pink ceramic Application: General TIG welding – steel, stainless, chromoly, aluminum Product Overview The Furick WP9/20 Pink Ceramic Cups – Collet Body Mount are designed for TIG welders using standard collet body setups (not gas lens). These high-quality cups offer excellent arc stability, good puddle visibility, and thermal durability, making them ideal for a variety of welding applications where gas lens performance is not required. These cups are perfect for welders who prefer or require a traditional collet body configuration on their WP9 or WP20 series torches. Key Features Standard Collet Body Mount Design Compatible with traditional collet and collet body setups—no gas lens required. Ideal for straightforward TIG welding operations or where gas lens kits are unavailable. Durable Pink Ceramic Manufactured from high-purity alumina ceramic with enhanced thermal resistance and mechanical strength, built to withstand regular use in shop or field conditions. Versatile Cup Sizes Typically available in #4 through #8 (1/4" to 1/2" orifice), giving you control over shielding gas coverage and access to different joint configurations. Reliable Arc Focus The ceramic structure helps channel shielding gas efficiently over the arc and weld zone, improving arc focus and reducing oxidation. Technical Specifications AttributeValue Material Alumina pink ceramic Mount Type Standard collet body (non-gas lens) Torch Series WP9 / WP20 / WP25 air-cooled Cup Sizes #4 to #8 (varies by kit/stock) Amperage Range Up to ~180 A (air-cooled torch) Applications TIG welding of mild steel, stainless steel, aluminum, and chromoly Fabrication shops, motorsport builds, exhaust and roll cage work Ideal for welders without a gas lens setup or where stubby kits aren't required Benefits   Easy installation with standard collet bodies—no torch modifications needed Durable and affordable for everyday welding tasks Allows consistent gas coverage for cleaner welds Compatible with multiple cup sizes for flexibility

Furick WP9/20 Pink Ceramic Gas Lens Cups

Furick WP9/20 Pink Ceramic Gas Lens Cups Compatible with: WP9, WP20, and other small-body TIG torches (9/20 series) Cup Type: Gas Lens Ceramic Color: Pink Application: Precision TIG welding – stainless steel, titanium, mild steel, chromoly, aluminum Product Overview The Furick WP9/20 Pink Ceramic Cups are high-performance gas lens cups designed for precision TIG welding applications. Known for their excellent gas coverage, thermal durability, and wide visibility of the weld puddle, these cups are a must-have for welders using WP9 or WP20 series torches—especially in stainless steel and exotic material work. Key Features Premium Pink Ceramic Construction Offers excellent thermal resistance and mechanical strength for long-lasting use under demanding TIG conditions. Optimized for Gas Lens Setups Designed specifically for use with gas lens collet bodies, enabling superior shielding gas flow and puddle coverage, especially in stainless and reactive metal welding. Enhanced Gas Coverage Helps achieve laminar gas flow across the weld zone—reducing oxidation, contamination, and improving overall weld quality. Stubby Gas Lens Compatibility These cups pair well with stubby gas lens kits, ideal for tight-access TIG applications and improved torch balance. Wide Range of Sizes Commonly available in cup sizes #4 through #8 (and sometimes larger), offering options based on joint access, amperage, and gas flow needs. Technical Specifications AttributeValue Material Alumina pink ceramic Cup Sizes #4, #5, #6, #7, #8 (varies by set) Torch Fitment WP9, WP20, WP25 (9/20 series) Use with 45V44, 45V43, 45V42, or stubby lens kits Max Amperage Up to 200 A (air-cooled systems) Applications TIG welding of stainless steel, titanium, Inconel, and mild steel Fabrication, exhaust work, aerospace, and food-grade pipe welding Ideal for low-current, precision work where clean welds and shielding are critical Benefits   Superior shielding gas control over standard cups Improved arc stability and puddle visibility Compatible with Furick and most universal stubby lens kits Helps reduce rework due to oxidation or arc wander Durable and cost-effective for daily professional use

Weld Star Weldstar ER80S-G Corten MIG Wire 15KG 300MM Reel

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Precision layer wound for superior wire feeding characteristics. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.         

Starparts Anti-Spatter 5Ltr Container

Starparts Anti-Spatter 5 Litre Keep your welding jobs clean and reduce post-weld clean-up with Starparts Anti-Spatter 5 Litre. This high-performance anti-spatter fluid is formulated to prevent weld spatter from adhering to surrounding surfaces, helping to maintain a cleaner finish while reducing the time and effort required for grinding, chipping and cleaning after welding. Suitable for use on MIG and MAG welding applications, Starparts Anti-Spatter provides effective protection for workpieces, fixtures, welding torches and nozzles without affecting weld quality when used correctly. The 5-litre container is ideal for busy workshops, fabrication facilities and industrial environments where anti-spatter fluid is used regularly. Easy to apply by spray bottle or compatible dispensing system, this economical solution helps extend the life of welding consumables while improving productivity and delivering a more professional finish. Features & Benefits High-performance anti-spatter fluid for welding applications. Helps prevent weld spatter from sticking to workpieces and equipment. Reduces post-weld cleaning and finishing time. Suitable for protecting welding torches, nozzles, fixtures and surrounding surfaces. Ideal for MIG and MAG welding processes. Can be applied using a spray bottle or dispensing system. Large 5-litre container, perfect for workshop and industrial use. Helps improve productivity and maintain a cleaner working environment. Whether you're carrying out fabrication, repair or production welding, Starparts Anti-Spatter 5 Litre is a reliable workshop essential for achieving cleaner welds, reducing downtime and protecting valuable welding equipment.

Tempilstik Temperature Indicator

Tempilstik Temperature Indicator The Tempilstik Temperature Indicator is a fast, accurate, and reliable method of measuring surface temperature before, during, and after welding, heat treatment, and fabrication processes. Trusted by welders, inspectors, and engineers worldwide, Tempilstik temperature crayons provide a simple visual indication when a specific temperature has been reached, helping to ensure compliance with welding procedures and quality standards. Each Tempilstik is formulated to melt instantly at its rated temperature, leaving a clear visual indication that the required surface temperature has been achieved. Unlike infrared thermometers, Tempilstik indicators are unaffected by surface finish, emissivity, or ambient conditions, making them ideal for use in demanding industrial environments. Available in a wide range of temperature ratings, Tempilstik indicators are widely used to verify preheat temperatures, interpass temperatures, post-weld heat treatment (PWHT), and equipment maintenance across fabrication, construction, power generation, oil & gas, shipbuilding, and heavy engineering industries. Key Features Accurate and reliable surface temperature indication. Instantly melts at the rated temperature for a clear visual result. Ideal for checking preheat, interpass, and post-weld heat treatment temperatures. No batteries or calibration required. Easy to apply directly to the workpiece. Unaffected by surface emissivity or lighting conditions. Available in a wide range of temperature ratings. Trusted by welding professionals and inspectors worldwide. Applications Welding preheat verification Interpass temperature monitoring Post-weld heat treatment (PWHT) Steel fabrication Pipe welding Structural engineering Pressure vessel manufacture Power generation Oil & Gas Shipbuilding Maintenance and repair Specifications Brand: Tempil Product Type: Temperature Indicator Stick (Tempilstik) Measurement Method: Melting point temperature indication Temperature Range: Available in multiple temperature ratings Application: Surface temperature verification Compliance: Widely used to support welding procedures and quality control requirements   Whether you're working to strict welding specifications or carrying out routine fabrication, the Tempilstik Temperature Indicator provides a dependable, easy-to-use solution for accurate surface temperature verification, helping ensure consistent weld quality and compliance with industry standards

SIF No.44 Nickel Aluminium Bronze TIG Brazing Rods

Nickel aluminium bronze for AB2 material and marine/corrosive applications and can be used for the assembly of cupro-aluminium materials of similar composition. Applications: ship propellers, parts for turbines, bearings, valves, sifters, pumps, pipe systems, apparatus engineering, containers. Overlay welding on steel and aluminium bronze including multicomponent alloys

Fronius Leather Welding Jacket Highend

The Fronius HighEnd leather welding jacket is made from a smooth, elastic calf leather and is manufactured to EN 11611: 2008-2-A1 standard. The button placket and stand-up collar can be closed with Velcro and the sleeves are equipped with elastic bands. The high-quality leather jacket is available in sizes S to XXXXXL.