Cibo FMLA PTX Cloth Flap Wheel 100 x 100 x 19MM Keyway 120 & 180Grit

FMLA PTX Cloth Flap Wheel 100 x 100 x 19MM Keyway 120 & 180Grit  100mm diameter 120 grit FMLA wheel is good for intermediate sanding, light damage removal & graining. FMLA Coated abrasive flap brushes are designed to fit the ‘barrel sander’ tools such as the Finimaster with a 19mm keyway fitting. The abrasive cloth wheels will clean, grain and put a textured surface on stainless steel and non-ferrous metals.”100mm diameter 120 grit FMLA wheel is good for intermediate sanding

Cibo FMTA Tex PTX Wheel 180 grit flap wheel 100mm x 50mm x 19mm keyway

  Tex flap brushes remove light damage and scratches and leave a fine satin finish FMTA 180 leaves is the ideal wheel for blending a 320 grit satin finish Use with Finimaster Basic machine or other 19mm key mounted satinising machines and drum sanders. Note: The 100 x 50mm keyway brushes can also be used with variable speed grinders such as the Cibo Finipower Plus. Ideal for narrower box section and strip satin finishing

Cibo FMCAC Ceramic 60 Grit PTX Combi Brush 100 x 100mm x 19mm Keyway

FMCAC Ceramic 60 Grit PTX Combi Brush 100 x 100mm x 19mm Keyway Also called ‘The Ginger Ninja’ our new 60 grit ceramic cloth and ‘scotchbrite’ combination flap wheels have a surprisingly high durability and cut rate. Use the Combi 60 grit ceramic wheels for edge shaping surface damage removal. The Ginger Ninja will even remove light scale on stainless steel bar to create a consistent grain finish. Dependent on the final finish required a fine satin finish can be achieved if the FMCM/60 is followed by either an FMCM/80 wheel or FMTM. Use with Finimaster Basic machine or other 19mm keyway driven satin polishing machines or drum sanders. size 100 mm x 100 mm x 19 mm keyway fixing

Beltit BG10 Airfile Fixed Arm 330mmx10mm

Beltit BG10 Airfile Fixed Arm- 330mmx10mm This is a powerful machine, it has a fixed speed motor but has plenty of power when it is required. The 110V motor can be used on mild steel or for general fabrication work. Dressing out welding spatter or deburring laser cut edges are easy with this handheld air driven sander.   Ideal for use on mild steel and in auto repair or steel fabrication work. For our full range of abrasive finishing systems click here.   BG10 Air Machine Specification: Pneumatic: Beltit BG10 Arm: 330 x 10mm Belt Length: 330mm Belt width: 10mm Weight: 0.3kg Power: 0.8hp   Best Belts: 40 grit: TZ59/40/330X10 60 grit: TZ59/60/330X10 80 grit: TZ59/80/330X10 120 grit: TZ59/120/330X10  

Beltit BG20 Powerfile 110V Fixed 520x20mm

Beltit BG20 Powerfile 110V Fixed Arm (520mmx20mm) The 110V GG20 Beltit Powerfile is a powerful motorised powerfile sander. The handheld sander is ideal for use on mild steel and during general fabrication work. The single speed motor is ideal for dressing out welding spatter or deburring laser cut edges. The BG20 is suitable for many environments; sheet metal fabricators or for light foundry work.   For our full range of abrasive finishing systems click here.   BG20 120V Machine specification: Power supply: Beltit BG 110 volt Arm for belt: 520mm Belt width: 20mm Weight: 2.4kg Power: 570 watt motor   Applications of this machine: Weld and splatter removal, dressing and finishing MIG welds in difficult areas   Best belts for this machine: 40 grit: FX87/40/520X20 60 grit: FX87/60/520X20 80 grit: FX87/80/520X20

Beltit BG20 Powerfile 240V Fixed Arm 520mmx20mm

Beltit BG20 240V Powerfile Fixed arm (520x20mm Arm) The Beltit 240V single speed powerfile is a powerful handheld sander which is good for use on mild steel and general fabrication work. This could be dressing out welding spatter or deburring laser cut edges. A slightly heavier alternative this handheld machine weighs 2.4kg, the power supply is 240V.   For our full range of abrasive finishing systems click here.   BG20 110v Machine Specification: Power supply: Beltit BG 110 volt Arm for belt: 520mm Belt width: 20mm Weight: 2.4kg Power: 570 watt motor   The best belts to use with the Beltit BG20 40 grit: FX87/40/520X20 60 grit: FX87/60/520X20 80 grit: FX87/80/520X20

Beltit BG30 Airfile Fixed Arm 540x30mm

Beltit BG30 Airfile Fixed Arm 540x30mm  A powerful machine with air driven motor, ideal for use on heavy steel and other fabrication work, also ideal for dressing out welding spatter or deburring laser cut edges. The BG30 is ideal for use in sheet metal fabrication and foundry environments. The power capabilities of this are 1100W. For our full range of abrasive finishing systems click here.     Specification: Power: 1100W Arm: 540x30mm Weight: 2.9kg   Applications of this handheld sander: Heavy duty machining Sheet metal fabricators Foundry work  Heavy steel work Grinding Fettling Dressing     

Beltit BG30 Powerfile 110V Fixed 540mmx30mm Arm

Beltit BG30 Powerfile Fixed Arm 540x30mm 110V  A powerful machine with air driven motor, ideal for use on heavy steel and other fabrication work, also ideal for dressing out welding spatter or deburring laser cut edges. The BG30 is ideal for use in sheet metal fabrication and foundry environments. The power capabilities of this are 1100W.  For our full range of abrasive finishing systems click here.     Specification: Power: 1100W Voltage: 110V Arm: 540x30mm Weight: 2.9kg   Applications of this handheld sander: Heavy duty machining Sheet metal fabricators Foundry work  Heavy steel work Grinding Fettling Dressing     

Beltit BG30 Powerfile 240V Fixed 540mmx30mm Arm

Beltit BG30 Powerfile 240V Fixed Arm (540mmx30mm) This Powerfile is a single speed motor, ideal for heavy duty steel and fabrication work, this could be dressing welding spatter or deburring laser cut edges. The BG30 can be used in sheet metal fabrication or foundry environment depending on machine choice. For our full range of abrasive finishing systems click here.     Specification: Power: 1100W Voltage: 240V Arm: 540x30mm Weight: 2.9kg   Applications of this handheld sander: Heavy duty machining Sheet metal fabricators Foundry work  Heavy steel work Grinding Fettling Dressing   

Beltit Finipower Inline sander 230V

Finipower Inline Sander 230V  The Finipower In line sander from Cibo is a variable speed handheld machine which has a reciprocating head which applies a satin grain finish on corners of box tubes and frame work. This is done by removing weld discolouration, removes scrathes and other damage, restores and blends with original finish. Motor is protected against dust, continuously adjustable RPM, overload protection.   The stroke frequency is between 2500-5250 a minute, the machine weights less than 2kg which means it is portable and light enough for everyday work.  Cibo have undertaken vibration and sound testing according to EN 60745 and EN 60745 respectively.    Vibration test:  5.1 m/s2 k+1.5m/s2   Sound Pressure  -79.5 dB (A) K=3dB 

Cibo TGR Tex Coarse A Grip sheet

Grip sheets Coarse A 60 mm x 40 mm for linear sander    Use P80 and A coarse sheets for P240 grain finish    Use P120 and A fine sheets for P320 grain finish

Cibo TGR Tex Fine A Grip Sheet

Grip sheets Coarse A 60 mm x 40 mm for linear sander    Use P80 and A coarse sheets for P240 grain finish    Use P120 and A fine sheets for P320 grain finish   Pack of 100

Cibo TGR Tex Fine S Grip Sheet

Grip sheets Fine S 60 mm x 40 mm for linear sander    Use P80 and A coarse sheets for P240 grain finish    Use P120 and A fine sheets for P320 grain finish   Pack of 100

Cibo SMFP Finipower 110V Polisher

Finipower 110V Polisher This 110v polisher is a 125mm variable speed sander which is great for use in any polishing process, including: stone, glass, brass, copper and automotive paints.  Vibration data: base test data was conducted and this depends on grade, density of the wheels used and the speed of the machine. Finipower-1.59m/s2.   This variable speed grinder is ideal for stainess steel due to: stainless steel heats quicker than steel therefore will work harden if operating at the normal grinder speed. 11000rpm is too high (standard UK grinders are around this) the variable speed means much more control so reduces any chance of damage.  increased heat causes the abrasive to glaze over due to heat or will increase consumable use, lower speeds prevent this.  Powerful variable speed grinder: This machine is heavier in weight to other grinders but it is higher powered. The higher torque means higher grinding and finishing quality.   Cibo RCD Rapid Combi Discs  Increased disc life, better finish and lower costs with the Finipower plus.  these discs operate at their best at 3500-4000 rpm so the Finipower Plus is ideal. 

Cibo SMFP Finipower 230V Polisher

Finipower 230V Polisher This 230v polisher is a 125mm variable speed sander which is great for use in any polishing process, including: stone, glass, brass, copper and automotive paints.  Vibration data: base test data was conducted and this depends on grade, density of the wheels used and the speed of the machine. Finipower-1.59m/s2.   This variable speed grinder is ideal for stainless steel due to: stainless steel heats quicker than steel therefore will work harden if operating at the normal grinder speed. 11000rpm is too high (standard UK grinders are around this) the variable speed means much more control so reduces any chance of damage.  increased heat causes the abrasive to glaze over due to heat or will increase consumable use, lower speeds prevent this.  Powerful variable speed grinder: This machine is heavier in weight to other grinders but it is higher powered. The higher torque means higher grinding and finishing quality.   Cibo RCD Rapid Combi Discs  Increased disc life, better finish and lower costs with the Finipower plus.  these discs operate at their best at 3500-4000 rpm so the Finipower Plus is ideal.     

Cibo Finimaster Pro 110V PTX Drum Sander machine

Cibo Finimaster Pro Drum Sander Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro  We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing  

Cibo Finimaster Pro 110V PTX Drum Sander Set 1 Kit

Cibo 110V Finimaster Pro Drum Sander (Set 1) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.  We stock a range of Cibo products, take a look here or get in touch for our full range.  Finimaster Drum Sander set 1 contents: FMCI 110v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5)   For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing    

Cibo Finimaster Pro PTX Sander 110V Set 2 Drum

Cibo Finimaster Pro 110V Drum Sander Set 2 The 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro  We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    We stock a range of Cibo products, take a look here or get in touch for our full range.    This Cibo Finimaster Drum Sander Set 2 Contains: FMCI 110v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMCM Combi Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5) Inoxiclean Stainless Steel Cleaner (x1 can) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m) Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing Grain finishing: Use the Finimaster Pro with abrasive sleeve on inflatable tyre, then a wide range of tex and combination wheels to get the desired finish.  Tube finishing: Use the drive roller with grip fixing belts to allow best satin finishing in the tightest locations.   This Cibo Drum stander is the ideal machine for sheet, round tube, square tube, square tube and box section finishing. Finimaster Pro Drum Sander has 5 inch diameter to give best quality, no mark, chatter free surface finish. 

Cibo Finimaster Pro 230V Drum Sander Machine only in case

Cibo Finimaster Pro Drum Sander  This is the 230V, machine only option for the Finimaster Pro Drum sander, it is designed for high quality satin polishing as well as sheet metal fabrication graining. The large diameter wheels ensure a chatter free experience making it easier to get the high quality satin finish desired.  M14 thread ensures that wheel changes are efficient and allow the sander to get into the edges. Cast iron handle ensures an ergonomic grip and high level of visibility when working with flat and rounded surfaces. Reduction in consumable cost due to larger wheels and sleeves.  Better access + larger wheels + longer life + higher quality finish = Finimaster Pro When grain finishing use the abrasive sleeves and inflatable tyre followed by a wide range of tex and combination wheels to achieve the desired finish. Tube finishing require a switch over to the drive roller with the grip fixing belts to allow higher quality finish even in tight locations.    Use the Cibo Finimaster Pro Drum Sander with:  – The FMSB/M drive wheels for satin finishing and mirror polishing round rubes– Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre– Tex /combi flap brushes for satin finishing– Sisal / cotton / flannel polishing wheels for high quality mirror polishing  

Cibo Finimaster Pro 230V PTX Drum Sander Set 1

Cibo Finimaster Pro Drum Sander (Set 1) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Contents of Set 1: FMCI 230v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5)   We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing    

Cibo Finimaster Pro 230V Drum Sander Set 2

  Cibo Finimaster Pro Drum Sander (Set 2) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Contents of Set 2: FMCI 230v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMCM Combi Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5) Inoxiclean Stainless Steel Cleaner (x1 can) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m)   We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing The Finimaster Pro is the best satin polishing machine for sheet, rounded, square tubing and box section finishing. This machine operates with 5 inch diameter wheels prevents chatter and high quality surface finish each time. 

Cibo Finimaster+Keyway Shaft 110V Machine only

Cibo Finmaster + Keymaster Shaft 110V machine only  This is the original 110V drum sander from Cibo, the 19mm keyway fixing fits all wheels, sleeves and drums. The Finimaster Keyway allows for sheet, round and square tubing as well as box section polishing. The keyway uses a 4 inch/100mm diameter wheel to allow for efficient and consistent satin or mirror finish. The wheels quickly can be changes using the 19mm keyway.  Use this machine with: Abrasive belts and sleeves (p36 to felts) with a large footprint inflatable tyre. tex/combi and abrasive cloth flap brushes for satin finishes Sisal/cotton/flannel polishing wheels for high quality mirror polishing the FMSB/1 drive wheels for satin finishing and mirror polishing of round tubes.  

Cibo Finimaster+Keyway Wheels 110V Set 2

110 volt Cibo Finimaster Keyway drum sander: This Cibo drum sander is the best for polishing sheet metal, round rube, square tube and box section. It is ideal to graining, satin finishing and polishing. The second set contains a wide range of abrasive belts or sleeves which will mount on the 19mm keyway shaft.    Why we love the Cibo Finimaster Keyway drum sander: – The FMNU inflatable wheel (supplied in set 2) can be used with a wide range of abrasive sleeves (from 36 grit to mirror polishing) – FMTA & FMCA wheels are ideal for satin polishing – The FMSB drive wheel means you can even polish and grain tubes with the Finimaster keyway   This set contains: FMBA Finimaster Basic Machine (x1) FMTA Tex Wheel (x1) FMCA Combi Wheel (x1) FMSB Drive Wheel For Belts (x1) FMNU Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x2) Inoxiclean Stainless Steel Cleaner (x1) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m)   Finimaster Keyway wheels connect directly onto the 19mm keyway.

Cibo Finimaster+Keyway Wheels 230V Set 2

230V Cibo Finimaster Keyway drum sander: This Cibo drum sander is the best for polishing sheet metal, round rube, square tube and box section. It is ideal to graining, satin finishing and polishing. The second set contains a wide range of abrasive belts or sleeves which will mount on the 19mm keyway shaft.    Why we love the Cibo Finimaster Keyway drum sander: – The FMNU inflatable wheel (supplied in set 2) can be used with a wide range of abrasive sleeves (from 36 grit to mirror polishing) – FMTA & FMCA wheels are ideal for satin polishing – The FMSB drive wheel means you can even polish and grain tubes with the Finimaster keyway   This set contains: FMBA Finimaster Basic Machine (x1) FMTA Tex Wheel (x1) FMCA Combi Wheel (x1) FMSB Drive Wheel For Belts (x1) FMNU Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x2) Inoxiclean Stainless Steel Cleaner (x1) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m)   Finimaster Keyway wheels connect directly onto the 19mm keyway.

Cibo TZ59 Zirc Sanding Belt 330MM x 10MM - 36Grit

Cibo TZ59 Zirconium Sanding Belt – 330mm x 10mm, 36 Grit The Cibo TZ59 Zirconium Sanding Belt is a high-performance abrasive belt designed for fast material removal and long-lasting durability. Measuring 330mm x 10mm with a 36 grit abrasive surface, this belt delivers aggressive cutting action ideal for heavy grinding, deburring, and surface preparation on metal surfaces. Constructed with premium zirconium abrasive grains, the TZ59 provides superior cutting efficiency and consistent performance, even under high pressure. The resin-over-resin bonding and flexible backing ensure excellent wear resistance and smooth operation on both flat and contoured surfaces. Engineered for use with file belt sanders and power tools, the Cibo TZ59 offers professional results across a wide range of metalworking applications, including stainless steel and mild steel fabrication. Key Features: High-quality zirconium abrasive – provides aggressive and efficient material removal 36 grit – ideal for coarse grinding and heavy stock removal Durable resin bond and flexible backing – ensures longevity and smooth performance Size: 330mm x 10mm – suitable for file belt sanders Consistent cutting action – maintains efficiency throughout the belt’s lifespan Applications: Metal grinding and deburring Weld seam cleaning and blending Stainless steel and mild steel fabrication General surface preparation and shaping

Cibo Zirconium HZ72 Linishing Machine Sanding Belts - Pack Of 10

Zirconium HZ72 Linishing Machine Sanding Belts - Pack Of 10 Applications:  These zirconium HZ72 belts are our most popular grinding belt for stainless steel and steel. The high purity zirconia aluminum abrasive gives top performance levels compared to most zirconium belts The backing is heavy duty polyester giving much less risk of  being gouged when grinding or tube notching. We list popular sizes here, but many others are made to order. Please enquire if the size you are looking for is not listed. Use grade 36 or 40 for tube notching. Specification: Premium zirconium abrasive for high performance. Ideal for all ferrous metals including stainless steel. Heavy duty polyester backing. Well made angled, ground and taped joints. Available in coarse and medium grades up to 120. Sold in packs of 10 belt

Cibo Surface Conditioning (SCM) Flap Discs 4,5"(115mm) & 5"(125mm) Pk Of 10

Cibo Surface Conditioning (SCM) Flap Discs  Applications:  Surface conditioning flap discs are ideal for cleaning, removing light oxidation and surface finishing stainless steel and other metals. Surface conditioning material (SCM) is based on non-woven abrasive fleece and gives a more controlled and consistent sanding action than coated abrasive discs. They are capable of operating on fixed speed angle grinders, but life and performance are much improved if used on variable speed grinders, polishers or rotary sanders. Specification: Uses flaps of non-woven abrasive fleece needled to a backing scrim for durability. Cooler running and more consistent finish than coated abrasives. Select Grade 1 Coarse (approx 80-150 finish), Grade 2 Medium (approx 150-180 finish) or Grade 3 Very Fine (approx 220-320 finish). Colour coded: coarse = brown, medium = maroon, very fine = blue-grey. Max RPM: 115mm 13,300rpm. 125mm 12,200rpm. Advised speed: 3,000-6,000rpm. Sold in packs of 10, but 115mm can be ordered singly.

Cibo Aluminium Oxide DA Sanding Pad With Holes Velcro Backed 5"(125mm) & 6"(150mm)

Applications:  Aluminium oxide grip discs are ideal for use on DA and rotary sanders for use on a wide range of materials including wood, paint lacquers and sealers. They are flexible and suitable for use on softer backing pads for use on shapes such as car panels.  These may be preferred for hand sanding using grip hand blocks. Specification: High quality aluminium oxide abrasive. Loop grip backing for suitable backing pads. Flexible C - weight paper. Ideal for curves. Open coat with grinding aids for cooler sanding and low clogging. Grades from 40 to 320 in stock. Finer grades available on special order. Backing pads in stock for DA and rotary sanders.

Cibo PTX Tex Brush 100mm x 100mm x 19mm Keyway 180 Grit

Applications:  FMTA 180 leaves is the ideal wheel for blending a 320 grit satin finish Use with Finimaster Basic machine or other 19mm key mounted satinising machines and drum sanders. Specification: Made with non-woven abrasive flaps. For mounting on 19mm keywayed shafts.   Max 5,700rpm.  

Portwest A790 Anti Vibration Glove in Black

Portwest A790 Anti-Vibration Glove – Black The Portwest A790 Anti-Vibration Glove is designed to reduce the impact of vibration and shock from power tools and machinery, helping to prevent hand fatigue and vibration-related injuries. Certified to EN ISO 10819:2013, these gloves provide reliable protection for workers in construction, engineering, and industrial environments. Featuring multiple shock-absorbing pods in the palm, fingers, and thumb areas, the A790 offers superior comfort and control when operating tools such as grinders, drills, and sanders. The high-grip synthetic leather palm enhances tool handling, while the breathable spandex back ensures flexibility and all-day comfort. Finished in professional black with red accents, these gloves combine safety, durability, and performance for demanding work conditions. Key Features: Certified anti-vibration protection – conforms to EN ISO 10819:2013 Shock-absorbing padded zones – reduce vibration and impact fatigue Durable synthetic leather palm – provides excellent grip and abrasion resistance Breathable spandex back – enhances comfort and flexibility Adjustable wrist strap – ensures a secure, comfortable fit Colour: Black with red trim Ideal for power tool and machinery use Applications:   Construction and engineering work Metal fabrication and workshop use Power tool operation (grinders, sanders, breakers, drills) Maintenance and industrial environments