Stronghand Tools Stronghand EZ View Gas Cylinder Valve Indicator

Strong Hand EZ-View Gas Cylinder Valve Indicator Never accidentally leave a gas cylinder turned on again with the Strong Hand EZ-View Gas Cylinder Valve Indicator. Designed to provide a clear visual indication of whether a gas cylinder valve is open or closed, this simple yet highly effective safety accessory helps reduce gas wastage, improve workshop safety, and lower operating costs. The EZ-View indicator snaps securely onto the cylinder valve handwheel and can be recognised from a distance, allowing operators to instantly identify the valve status without needing to inspect it closely. Manufactured from durable ABS plastic, it is built to withstand the demands of busy fabrication workshops, welding bays, and industrial environments. Available to suit a range of common gas cylinder valve handwheel designs, the EZ-View Gas Cylinder Valve Indicator is an ideal addition to any MIG, TIG, or gas welding setup where safety and efficiency are a priority. Key Features: Provides an instant visual indication of gas valve open or closed status Helps prevent expensive shielding gas from being left on accidentally Improves workshop safety and promotes good operating practices Durable ABS plastic construction for long service life Quick, tool-free snap-on installation Visible from a distance for fast status checks Available to fit 3-star, 5-star and 8-star gas cylinder valve handwheels Ideal for welding workshops, fabrication facilities and industrial gas applications Specifications: Product Type: Gas Cylinder Valve Status Indicator Material: High-impact ABS Plastic Installation: Snap-on, tool-free fitting Compatibility: Available for 3-star, 5-star and 8-star cylinder valve handwheels Application: Suitable for shielding gas and industrial gas cylinders Manufacturer: Strong Hand Tools

Hi-Lo Gas Equipment Hi-Lo DGN Fuel Gas Non-Reset Flashback Arrestor Regulator Mounted

Hi-Lo DGN Fuel Gas Non-Reset Flashback Arrestor (Regulator Mounted) The Hi-Lo DGN Fuel Gas Non-Reset Flashback Arrestor is a critical safety device designed to protect gas equipment and operators from dangerous flashback incidents. Specifically engineered for regulator mounting, it provides reliable protection in fuel gas systems used in welding, cutting, and heating applications. Featuring a non-resettable design, this flashback arrestor ensures maximum safety by permanently shutting off gas flow in the event of a flashback, preventing flames from travelling back into the regulator or gas supply. Its high-quality construction and precision engineering deliver dependable performance under demanding industrial conditions. Compact and easy to install, it integrates seamlessly with compatible regulators, adding an essential layer of protection without complicating your setup. Built to meet stringent safety standards, it is an indispensable component for maintaining safe and compliant gas operations. Key Features: Designed for fuel gas systems in welding and cutting applications Regulator-mounted for convenient installation Non-resettable mechanism for maximum safety Prevents reverse gas flow and flashback hazards Durable, high-quality construction for long-term reliability Compact design for easy integration

Hi-Lo Gas Equipment Hi-Lo DGN Oxygen Non-Reset Flashback Arrestor Regulator Mounted

Hi-Lo DGN Oxygen Non-Reset Flashback Arrestor (Regulator Mounted) The Hi-Lo DGN Oxygen Non-Reset Flashback Arrestor is a critical safety device designed to protect gas equipment and operators from dangerous flashback incidents. Specifically engineered for regulator mounting, it provides reliable protection in oxygen systems used in welding, cutting, and heating applications. Featuring a non-resettable design, this flashback arrestor ensures maximum safety by permanently shutting off gas flow in the event of a flashback, preventing flames from travelling back into the regulator or gas supply. Its high-quality construction and precision engineering deliver dependable performance under demanding industrial conditions. Compact and easy to install, it integrates seamlessly with compatible regulators, adding an essential layer of protection without complicating your setup. Built to meet stringent safety standards, it is an indispensable component for maintaining safe and compliant gas operations. Key Features: Designed for oxygen systems in welding and cutting applications Regulator-mounted for convenient installation Non-resettable mechanism for maximum safety Prevents reverse gas flow and flashback hazards Durable, high-quality construction for long-term reliability Compact design for easy integration

Hi-Lo Gas Equipment Hi-Lo GG Fuel Gas Torch Side Flashback Arrestor

Hi-Lo GG Flashback Arrestor – Torch-Side Protection The Hi-Lo GG Flashback Arrestor provides reliable torch-side protection in accordance with DIN EN ISO 5175-1 standards. Designed for maximum safety, it features an integrated dust filter to protect the gas non-return valve from contamination, ensuring long-lasting, trouble-free operation. Constructed entirely from high-quality brass (2.0401) with a durable stainless-steel spring (1.4310), this device effectively stops flashbacks using a precision flame arrestor. Each flashback arrestor is 100% safety tested by a qualified and authorised technician at regular intervals, in compliance with strict regulations. Testing covers gas tightness, gas flow, and gas return, guaranteeing reliable performance in demanding environments. Key Features: Complies with DIN EN ISO 5175-1 safety standard. Stops flashback through an integrated flame arrestor. Built with all-metal brass and stainless-steel components for strength and durability. Dust filter protects the gas non-return valve from contamination. Individually tested for gas tightness, gas flow, and gas return by certified personnel. Product Numbers:   Fuel Gas – HL070371

Starparts Gas Cylinder 90° Adaptor Left Hand Threaded

Gas Cylinder 90° Adaptor Left Hand Threaded makes connecting the regulator easier when cylinders have a big guard round the tap on top

Starparts Gas Nut 3/8" BSP Left Hand Thread

Gas Nut – 3/8″ BSP Left Hand Thread This precision‑made 3/8″ BSP left hand thread gas nut is a reliable and essential component for welding gas delivery systems that require left‑handed connections. Designed for secure sealing and robust performance, it ensures gas‑tight joints between regulators, hoses and fittings in professional welding environments. Key Features & Benefits 3/8″ BSP left hand thread — standard left‑handed thread for applications that require reverse threading Precision machined — ensures accurate fit and reliable gas‑tight sealing Durable construction — engineered to withstand workshop conditions and repeated use Versatile use — ideal for TIG, MIG and gas‑shielded welding applications Applications Perfect for gas system installations or repairs where a left‑hand threaded gas connection is specified, such as on certain regulators, valves and welding equipment. Compatibility Fits gas fittings, regulators, valves and accessories with a 3/8″ BSP left hand threaded port, ensuring a secure and leak‑free connection.

Hi-Lo Gas Equipment Hi-Lo GG Oxygen Torch Side Flashback Arrestor

Hi-Lo GG Flashback Arrestor – Torch-Side Protection The Hi-Lo GG Flashback Arrestor provides reliable torch-side protection in accordance with DIN EN ISO 5175-1 standards. Designed for maximum safety, it features an integrated dust filter to protect the gas non-return valve from contamination, ensuring long-lasting, trouble-free operation. Constructed entirely from high-quality brass (2.0401) with a durable stainless-steel spring (1.4310), this device effectively stops flashbacks using a precision flame arrestor. Each flashback arrestor is 100% safety tested by a qualified and authorised technician at regular intervals, in compliance with strict regulations. Testing covers gas tightness, gas flow, and gas return, guaranteeing reliable performance in demanding environments. Key Features: Complies with DIN EN ISO 5175-1 safety standard. Stops flashback through an integrated flame arrestor. Built with all-metal brass and stainless-steel components for strength and durability. Dust filter protects the gas non-return valve from contamination. Individually tested for gas tightness, gas flow, and gas return by certified personnel. Product Numbers:   Oxygen – HL070370 Fuel Gas – HL070371

NMSH Heating Adaptor For NM Torches

NMSH Super Heating Adaptor The NMSH Super Heating Adaptor is a high-quality heating accessory designed to provide reliable, efficient performance for a wide range of industrial and fabrication applications. Built for use with compatible super-heating nozzles and equipment, this adaptor ensures a secure, leak-free connection, delivering maximum heat output for tasks such as heavy-duty brazing, metal pre-heating, flame straightening, and heat treatment. Constructed from durable, precision-machined brass, the NMSH adaptor offers excellent thermal resistance and long service life, even under high-temperature conditions. Its robust design allows for safe, consistent gas flow, giving operators the confidence to tackle demanding heating jobs with accuracy and control. Key Features: Precision-machined brass construction – exceptional strength, conductivity, and heat resistance. Secure fit – provides a tight, leak-free connection to compatible super-heating nozzles. High thermal performance – supports heavy-duty heating, brazing, and pre-heating tasks. Industrial-grade durability – built for frequent use in fabrication, welding, and maintenance environments. Easy installation – quick to fit and replace for minimal downtime.   Ideal for workshops, fabrication shops, and maintenance teams, the NMSH Super Heating Adaptor delivers safe, efficient performance wherever high-output heating is required.

Jasic EVO MIG 350S Multi Process Separate Water

Jasic EVO MIG 350S Multi Process Separate Water Cooled The Jasic EVO MIG 350S, a Separate Water-Cooled Model, is built for professionals who demand durability and accuracy in every weld. Powered by an advanced ARM and DSP dual microprocessor system, it regulates the arc output in real time, adapting instantly as conditions change across MIG/MAG, MMA, and DC Lift-TIG processes. The separate wire feed unit is equipped with a ClearVision HD digital display for enhanced visibility and control. Hollow rotary shaft encoders give precise adjustments, while 2T/4T, Cycle, and Spot trigger functions make it simple to adapt to your preferred welding style. With both synergic and manual modes available, you’ll achieve smooth droplet transfer and consistent bead quality no matter the application. For longer sessions, the integrated water-cooled technology keeps the torch running at peak performance. The dual drive wire feeder features 37.45mm rollers, ensuring reliable delivery even with demanding materials. An IP23S protection rating and robust component protection provide long-term reliability. Backed by Jasic’s 5-year warranty, it’s a machine built to last. Efficiency comes as standard. Smart cooling only runs when needed, while auto sleep mode reduces power draw to under 10W when idle, helping to lower running costs without affecting performance. Engineers Mode provides quick access to proven parameter settings, and built-in program memory stores your own configurations for repeat jobs. Connectivity is also taken further. Control the machine your way—via wired, wireless, or mobile app options. The USB-C port allows easy software updates and device charging, and with generator-friendly operation, the EVO MIG 350S is just as dependable on-site as it is in the workshop. What’s included in the Kit: MIG/Multi Process Welder Dual Drive Wire Feed Unity (4 Roll) Interconnections 5m Trolley Water Cooler Hard Core Water Cooled MIG Torch 4m Feedrolls Regulator Gas Hose & Earth Lead Why we love the EVO MIG 350S Multi Process Separate Air Cooled Rugged, ergonomic design Water Cooled Package Advanced inverter technology with ARM and DSP digital microprocessor control Separate wire feed unit with ClearVision digital display and full parameter control ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment 2T/4T/Cycle and Spot trigger control Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable Excellent welding characteristics with enhanced droplet transfer Crater fill setting On demand cooling and auto sleep mode ensures market leading energy efficiency with idle power consumption of less than 10W Key power electronic component protection Standard MIG, Push Pull or Spool Gun torch selection Enhanced dual drive wire feeder with 37.45mm rollers Program memory storage (10 per process) Welding Engineers Mode for default parameter selection IP23S protection class rating Flexible remote control solutions including wired, wireless and mobile app control USB Type-C port for software updates and device charging Generator friendly *must have AVR  

Jasic EVO MIG 350S Multi Process Separate Air

Jasic EVO MIG 350S Multi Process Separate Air Cooled Built to perform in the most demanding environments, the Jasic EVO MIG 350S Separate combines rugged industrial design with advanced digital control for a truly professional welding experience. Powered by ARM and DSP dual microprocessors, the machine adapts in real time to deliver a smooth, stable arc with exceptional precision, no matter the process. The separate wire feed unit is engineered for efficiency, featuring a ClearVision HD digital display with rotary encoders for effortless adjustment of every parameter. Even in challenging workshop conditions, settings remain easy to see and quick to control. With synergic MIG/MAG, MMA, and DC Lift-TIG capabilities, the EVO MIG 350S offers complete versatility. The dual drive wire feeder with precision 37.45mm rollers ensures consistent wire delivery, while advanced features such as crater fill, program memory storage, and Welding Engineers Mode give you full command of every weld. Efficiency is built in. The Smart Fan system runs only when required, reducing noise and dust intake, while auto sleep mode lowers idle consumption to less than 10W. Generator-friendly operation and IP23S protection mean this machine is just as reliable on site as it is in the workshop. Connectivity is equally flexible, with options for wired, wireless, and mobile app control, plus a USB Type-C port for software updates and device charging. Backed by Jasic’s industry-leading 5-year warranty, the EVO MIG 350S delivers the performance, reliability, and confidence professionals demand. What’s included in the Kit: 4 roll feed unit Trolley MIG Torch 4m Interconnections 5m Regulator Gas Hose & Earth Lead 3m Storage Toolbox Why we love the EVO MIG 350S Multi Process Separate Air Cooled Rugged, ergonomic design  Advanced inverter technology with ARM and DSP digital microprocessor control  Separate wire feed unit with ClearVision digital display and full parameter control  ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment  2T/4T/Cycle and Spot trigger control  Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable  Excellent welding characteristics with enhanced droplet transfer  Crater fill setting  On demand cooling and auto sleep mode ensures market leading energy efficiency with idle power consumption of less than 10W  Key power electronic component protection  Standard MIG, Push Pull or Spool Gun torch selection  Enhanced dual drive wire feeder with 37.45mm rollers  Program memory storage (10 per process)  Welding Engineers Mode for default parameter selection  IP23S protection class rating  Flexible remote control solutions including wired, wireless and mobile app control  USB Type-C port for software updates and device charging  Generator friendly *must have AVR 

Jasic Evo MIG 350CT Inverter MIG Welder

Jasic EVO MIG 350 CT Inverter Welder The design of the Jasic EVO MIG 350 CT Inverter is both rugged and ergonomically designed for professionals who demand precision without compromise. The 350 CT is powered by an ARM and DSP dual microprocessor system that instantly adapts to every moment of the weld. It regulates the arc output in real-time, even as conditions change. The digital display is slanted at 45° for improved visibility and an enhanced viewing area. Visible under direct sunlight, offering a clear reading all the time. Intelligent Synergic Control is built in, making setup for welds easier. Enter some basic information, and the welder will take care of the rest, selecting the optimal settings every time. It also comes fitted with Overheat and Overcurrent protection, which protect the machine from overheating and from the current getting too high. The machine will automatically switch off and reset, protecting the machine and the weld. Designed with today’s workshop in mind, the EVO MIG 350 sets a new standard for efficiency. Its smart cooling system only runs when needed, and the auto sleep mode cuts power use down to under 10W when idle. You’re in full control wherever you are, thanks to flexible remote options – whether that’s wired, wireless, or through the mobile app. A USB-C port makes it easy to keep the machine updated and your devices charged, while built-in program memory and generator-ready operation mean the welder is just as reliable on site as it is in the workshop. What’s Included in the Kit: EVO MIG 350 CT Welder Trolley MIG Torch 4m Regulator Hose Earth Lead Why We Love the Jasic EVO MIG 350 CT Inverter Welder: Rugged, ergonomic design  Advanced inverter technology with ARM and DSP digital microprocessor control  ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment  2T/4T/Cycle and Spot trigger control  Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable  Excellent welding characteristics with enhanced droplet transfer  Crater fill setting  On-demand cooling and auto sleep mode ensure market-leading energy efficiency with idle power consumption of less than 10W Key power electronic component protection  Standard MIG, Push Pull or Spool Gun torch selection  Enhanced dual drive wire feeder with 37.45mm rollers  Program memory storage  Welding Engineers Mode for default parameter selection  IP23S protection class rating  Flexible remote control solutions including wired, wireless and mobile app control  USB Type-C port for software updates and device charging  Generator friendly *must have AVR   

Jasic EVO MIG 500S Air-Cooled MIG Welder Package With 5Mtr Intercons

Jasic EVO MIG 500S Multi Process Separate Air Cooled c/w 5m Interconnection Cable Transform your welding projects with the EVO MIG 500, a professional-grade industrial welding machine that delivers precision, power, and peace of mind in one rugged package. Whether you're tackling heavy industrial fabrication or intricate metalwork, this advanced welder adapts to your needs with its intelligent ARM and DSP digital microprocessor control, ensuring flawless welds every time.  The separate wire feed unit features a crystal-clear ClearVision HD digital display with intuitive rotary encoders, making parameter adjustments effortless even in demanding work environments. From synergic MIG/MAG to MMA and DC Lift-TIG capabilities, you'll switch between welding processes seamlessly while the enhanced dual drive wire feeder with precision 37.45mm rollers guarantees smooth, consistent wire delivery. Built to withstand the toughest job sites with IP23S protection and designed for maximum efficiency with less than 10W idle power consumption, the EVO MIG 500 Separate keeps your productivity high and operating costs low.  Control your welding experience your way—whether through wired, wireless, or mobile app connectivity—and rest easy knowing your investment is protected by an industry-leading 5-year warranty that speaks to the uncompromising quality and reliability built into every machine. Key Features Rugged, ergonomic design  Advanced inverter technology with ARM and DSP digital microprocessor control  Separate wire feed unit with ClearVision digital display and complete parameter control  ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment  2T/4T/Cycle and Spot trigger control  Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable  Excellent welding characteristics with enhanced droplet transfer  Crater fill setting  On-demand cooling and auto sleep mode ensure market-leading energy efficiency with idle power consumption of less than 10W  Key power electronic component protection  Standard MIG, Push Pull or Spool Gun torch selection  Enhanced dual drive wire feeder with 37.45mm rollers  Program memory storage (10 per process) Welding Engineers Mode for default parameter selection  IP23S protection class rating  Flexible remote control solutions, including wired, wireless and mobile app control  USB Type-C port for software updates and device charging  Generator friendly *must have AVR  Package Includes:  MIG/Multi Process Inverter Power Source Dual Drive Wire Feed Unit (4 Roll) Interconnections 5m Trolley Integrated Toolbox Hard Core MIG Torch 4m Feedrolls Regulator Gas Hose & Earth Lead

Jasic EVO MIG 500S Watercooled Seperate Wire Feeder MIG Welder Package

Jasic EVO MIG 500S Multi Process Separate Water Cooled Package - 5m Interconnecting Cable Transform your welding capabilities with the EVO MIG 500 Separate Water Cooled, a professional-grade welder engineered for those who demand precision and reliability in their craft. This powerhouse combines rugged durability with cutting-edge technology, featuring advanced inverter control powered by ARM and DSP digital microprocessors that deliver consistently superior welding performance across MIG/MAG, MMA, and DC Lift-TIG applications. Master Every Weld with Intelligent Control The separate wire feed unit equipped with ClearVision HD digital display puts total parameter control at your fingertips. Hollow rotary shaft encoders allow for precise adjustments, while the intuitive 2T/4T/Cycle and Spot trigger control adapts to your welding style. Whether you're working on delicate fabrication or heavy industrial projects, the synergic and manual modes ensure optimal droplet transfer and exceptional bead quality every time. Built for the Long Haul Water-cooled technology keeps your welding gun operating at peak performance during extended sessions, while the enhanced dual drive wire feeder with 37.45mm rollers handles even the most demanding materials with ease. The IP23S protection rating and key component protection safeguard your investment, backed by an industry-leading 5-year warranty for complete peace of mind. Efficiency That Works as Hard as You Do Smart features like on-demand cooling and auto sleep mode deliver market-leading energy efficiency, consuming less than 10W in idle mode—keeping your operating costs low without compromising performance. The Welding Engineers Mode provides instant access to proven parameter settings, while program memory storage saves your custom configurations for consistent results across multiple projects. Connected Control, Anywhere Take command with flexible remote control options including wired, wireless, and mobile app connectivity. The USB Type-C port enables seamless software updates and device charging, while generator-friendly operation (with AVR) ensures reliable performance wherever your work takes you. Package Includes:  MIG/Multi Process Inverter Power Source Dual Drive Wire Feed Unit (4 Roll) Interconnections 5m Trolley Water Cooler Hard Core Water Cooled MIG Torch 4m Feedrolls Regulator Gas Hose & Earth Lead

Hi-Lo Gas Equipment Hi-Lo UK Made 2 Stage 2 Gauge Argon/CO2 Regulator Bottom Entry 10 Bar

Two Stage Fabmaster Elite 2 gauge Argon 10 bar Regulator   Key Information: · 2 years warranty · 300 bar service · Manufactured under BS EN SO 9001 · Conforms to BS EN ISO 2503 · Alloy bonnet for high strength · High contrast easy to read gauges · Made In Britain  · Available in bottom or side entry

Hi-Lo Gas Equipment Hi-Lo UK Made 2 Stage 2 Gauge Argon/CO2 Regulator Bottom Entry 5 Bar

Two Stage Elite 2 gauge Argon 5 bar Regulator Hi-Lo UK industrial gas cutting and welding equipment have a full range of high-quality products. We pride ourselves in customer satisfaction and with extensive experience and knowledge, we work to help with your industrial gas and gas control equipment needs.    Key Information: · 2 years warranty · 300 bar service · Manufactured under BS EN SO 9001 · Conforms to BS EN ISO 2503 · Alloy bonnet for high strength · High contrast easy to read gauges · Made In Britain 

Jasic EVO TIG 320P AC/DC Water Cooled Package

Jasic EVO TIG 320P AC/DC Water Cooled Package The EVO TIG 320P AC/DC Water-Cooled redefines precision and versatility for welding professionals who demand the best. Whether you're tackling complex AC welding applications or seeking flawless results in DC modes, this state-of-the-art TIG welder is your ultimate companion. With its revolutionary multi and hybrid-wave control technology, you have unparalleled flexibility to handle any job with ease. Equipped with digital control, the EVO TIG 320P simplifies setup and operation, aided by its program memory storage that allows you to save your go-to settings for repeat jobs. Its ClearVision digital display and intuitive interface make navigating its features, like easy-set welding parameters and auto tungsten tip shaping, a seamless experience—even for intricate work. Meanwhile, the device's Dash-Arc technology ensures a virtually perfect arc strike rate of 99% or better. Versatility doesn’t stop there. The EVO TIG 320P supports MMA welding with advanced features like Hot Start, Anti-Stick, and Arc Force control, while the LC-40 Water Cooler ensures top-tier performance and reliability for extended projects. Its Smart Gas technology calculates optimal post-flow gas timing automatically, keeping costs and waste to a minimum. Flexible control options, including wired, wireless, and mobile app control, mean you’re always in command, no matter where the work takes you. Built with portability and efficiency in mind, the EVO TIG 320P comes with a robust trolley, intelligent fan and cooler control and auto sleep mode, delivering industry-leading energy savings. Plus, it’s an AVR generator-friendly for full compatibility in varied work environments. Every purchase is backed by a comprehensive 5-year warranty, guaranteeing peace of mind. From professional workshops to on-site applications, the EVO TIG 320P AC/DC offers unmatched precision, usability, and reliability to enhance your craftsmanship and workflow. Key Features TIG AC/DC Pulse with digital control Program memory storage Multi and hybrid-wave control technology offers ultimate flexibility for any AC welding application Microprocessor control of a wide range of functions HF and lift TIG VRD function Auto tungsten tip shaping simplifies tungsten preparation and ensures consistent AC arc start performance ClearVision digital display with hollow rotary shaft encoder Intelligent fan and cooler control Excellent welding characteristics AVR generator friendly 2T/4T/Cycle and Spot trigger control Dash-Arc technology – ensures 99+% arc striking success rate Smart Gas technology automatically calculates the optimum post-flow gas time MMA welding with Hot Start, Anti-Stick and Arc Force control Assisted spot welding mode Flexible remote control solutions, including wired, wireless and mobile app control Easy-Set – Simplifies welding parameter settings LC-40 Water cooler with enhanced usability and reliability Auto sleep mode with industry-leading energy efficiency Package Includes: EVO 320P AC/DC Inverter Water Cooler Trolley TIG Torch Earth Return Lead Gas Hose Regulator Flowmeter  

Jasic EVO TIG 320P AC/DC Package

Jasic EVO TIG 320P AC/DC Package The EVO TIG 320P AC/DC redefines precision and versatility for welding professionals who demand the best. Whether you're tackling complex AC welding applications or seeking flawless results in DC modes, this state-of-the-art TIG welder is your ultimate companion. With its revolutionary multi and hybrid-wave control technology, you have unparalleled flexibility to handle any job with ease. Equipped with digital control, the EVO TIG 320P simplifies setup and operation, aided by its program memory storage that allows you to save your go-to settings for repeat jobs. Its ClearVision digital display and intuitive interface make navigating its features, like easy-set welding parameters and auto tungsten tip shaping, a seamless experience—even for intricate work. Meanwhile, the device's Dash-Arc technology ensures a virtually perfect arc strike rate of 99% or better. Versatility doesn’t stop there. The EVO TIG 320P supports MMA welding with advanced features like Hot Start, Anti-Stick, and Arc Force control, while the optional LC-40 Water Cooler ensures top-tier performance and reliability for extended projects. Its Smart Gas technology calculates optimal post-flow gas timing automatically, keeping costs and waste to a minimum. Flexible control options, including wired, wireless, and mobile app control, mean you’re always in command, no matter where the work takes you. Built with efficiency in mind, the EVO TIG 320P comes with intelligent fan and cooler control and auto sleep mode, delivering industry-leading energy savings. Plus, it’s AVR generator friendly for full compatibility in varied work environments. Every purchase is backed by a comprehensive 5-year warranty, guaranteeing peace of mind. From professional workshops to on-site applications, the EVO TIG 320P AC/DC offers unmatched precision, usability, and reliability to enhance your craftsmanship and workflow. Package Includes: EVO 320P AC/DC Inverter,   TIG Torch, Earth Return Lead, Gas Hose, Regulator Flowmeter

Jasic Evo Power MIG 160 MIG Welder Package

Jasic EVO Power MIG 160 Welder Take your welding projects to the next level with the Power MIG 160. Designed with precision, durability, and convenience in mind, this rugged and ergonomic machine is built to perform under the toughest conditions. Whether you're an experienced fabricator or a beginner, its advanced inverter technology ensures consistent and efficient MIG and MMA performance every time. Navigate settings effortlessly with a digital display and precise parameter adjustments thanks to digital encoders. The Power MIG 160 makes every job smoother with smart features like a welding engineer mode, a quick factory reset option, and an auto sleep mode to save energy. Need to fine-tune? The variable inductance control lets you optimise settings for perfect results. Plus, the built-in LED wire feeder cabinet ensures visibility, while a handy storage slot keeps spare feedrolls organised and at your fingertips. With a Voltage Reduction Device (VRD) for extra safety MMA mode, overcurrent and overheat protection, and a fan-on-demand system, this machine is as safe as it is powerful. Whether you're tackling heavy-duty projects or precise spot welding, the Power MIG 160 delivers unparalleled control and efficiency. Built for reliability and versatility, this welding machine delivers professional results every time. What sets the Power MIG 160 apart is its industry-leading five-year warranty, giving you unmatched peace of mind while you weld with confidence. Package Includes: Power MIG 160 Inverter, MIG Torch 3m, Earth Return Lead, Gas Hose & Regulator, V Groove Feedrolls 0.6/0.8mm & 0.8/1.0mm. Key Features MIG and MMA Rugged, ergonomic design  Welding engineer mode  Consistent and efficient MIG spot welding performance  Quick factory reset; auto sleep mode  LED inside wire feeder cabinet; handy accessory storage slot  ABAP: Active Balancing Air Passage  Fan on demand  Voltage Reduction Device (VRD)  Key power electronic component protection  Overcurrent and overheat protection  Essential features for a straightforward setup  Advanced inverter technology  Digital display  Digital encoders for precise parameter adjustment  2T/4T trigger control  Variable inductance control  Gas check and wire inching buttons  IP23S ingress protection rating 

G-Tech Gas Equipment Gtech Lightweight Welding & Cutting Set In Case

Starparts G-Tech Lightweight Welding & Cutting Set Compact, Professional Oxy/Acetylene Kit for Welding, Cutting & Maintenance Work The Starparts G-Tech Lightweight Welding & Cutting Set offers a versatile and portable solution for professional gas welding and cutting applications, particularly suited for light-to-medium duty fabrication, repair, and maintenance tasks. Designed with user comfort and mobility in mind, this set features a lightweight handle, mixer, and cutting attachment, making it ideal for extended use without operator fatigue—perfect for workshop use or on-site tasks. Equipped with precision 2-gauge oxygen and acetylene regulators, reliable in-line flashback arrestors, and 6mm twin hoses with 1/4" check valves, the system ensures safe and consistent gas delivery. The set also includes a range of nozzles to cover both welding and cutting operations, along with essential accessories—all housed in a compact, organised kit. Kit Contents:

3M Speedglas G5-01 TW Auto Darkening Welding Helmet

3M G5-01 TW Speedglas Auto Darkening Welding Helmet  Product Details Variable dark shade 5, 8-14 and variable dark state colors (for shades 8-14). The big, 170 x 104 mm, clear protective visor is curved, with excellent views up, down and peripherally.   Speedglas Natural Colour technology makes the filter view seem lighter, more detailed and colourful.   For more control over your comfort, the innovative G5-01 helmet duct system lets you direct the airflow to either your face, visor or somewhere in-between.   Re-configure your helmet using our many additional accessories to just the right coverage for your head, neck, and shoulders.   The slim profile and ergonomic design makes it even more lightweight and easier to go into tight welding spaces .   The G5-01 ADFs are Bluetooth enabled: with the 3M Connected Equipment app, users get access to additional functionalities, statistics and documentation.   3M™ Speedglas™ Welding Helmet G5-01, with welding filter G5-01TW, 611120   Can offer For use with 3M™ Speedglas™ Welding Filter Series G5-01 (sold separately).   To be combined with 3M™ Adflo™ Powered Air Respirator or 3M™ Versaflo™ Supplied Air Regulator System.   Get comfortable, easy to use protection during welding applications with 3M™ Speedglas™ Welding Helmet G5-01 with welding filter G5-01TW, 611120   To be combined with 3M™ Adflo™ Powered Air Respirator or 3M™ Versaflo™ Supplied Air Regulator System. Our welding helmet has a flip-up front that gives you a large, 170 x 104 mm, clear view that’s excellent for precision grinding in low-light conditions.   Welding filter viewing area 73 x 109 mm. Auto-ON/OFF.   Variable dark shade 5, 8-14 and variable dark state colors (for shades 8-14).

Starparts Argon & Inert Welding Gas Black 6MM (1/4") Hose Per Metre

The Argon & Inert Welding Gas Black 6mm (1/4") Hose is designed for carrying compatible shielding gases used in professional MIG and TIG welding applications. Featuring a 6mm (1/4") internal bore, this black gas hose is ideal for creating replacement gas lines, extending existing installations or producing custom-length welding gas hose assemblies. Suitable for argon and compatible inert shielding gases, it is a useful workshop essential for welding equipment, gas regulators, flowmeters and other compatible gas supply installations. The hose is sold and priced per metre, allowing you to order the length required for your particular installation while minimising unnecessary waste. Key Features Suitable for argon and compatible inert welding gases 6mm (1/4") internal bore Black gas hose Ideal for MIG and TIG welding applications Suitable for replacement and custom gas hose assemblies Useful for workshop and fabrication gas installations Order the length required for your application Sold per metre Typical Applications Ideal for use with compatible: MIG welding equipment TIG welding equipment Argon shielding gas systems Inert gas supply lines Welding regulators and flowmeters Workshop gas installations Specification Product Type: Welding Gas HoseSuitable Gas: Argon & Compatible Inert GasesColour: BlackBore Size: 6mm (1/4")Sold As: Per MetreTypical Application: MIG & TIG Welding Ordering Information This product is sold per metre. Simply select the quantity required to order your desired length. For example, a quantity of 5 = 5 metres of hose. Please Note: Always ensure the hose is suitable for the specific gas, pressure, fittings and equipment being used. Popular alternative to the clear nylon brainded gas hose 

Nylon Reinforced Clear Gas Hose Per Metre

Nylon Reinforced Clear Gas Hose  Ideal for making up welder gas hoses from machine to regulators Comes per metre order the amount you need 

11-13MM Double Eared Hose O-clip

Jasic EPT-200 200A DC TIG Welder Package 230V

Jasic EPT-200 CD TIG Welder The Jasic EVO POWER TIG 200 PFC (EPT-200) is a DC TIG welder that handles Steel, Stainless Steel, and Titanium. It's the entry-level TIG machine in the Jasic EVO range and works great if you need a solid DC TIG welder that runs off 230V (generators included). Don't let "entry-level" fool you though—it's still packed with loads of the same parameter controls you'll find on its bigger sibling, the EVO TIG 200 PFC. Like the rest of the upgraded EVO range (which replaced the much-loved PRO series), you get a large, easy-to-read control panel wrapped in a tough shell that looks the business. You can also add optional foot controls, including a wireless pedal, if you want that extra control and freedom while welding. The ClearVision screen is a high-def LED display set at just the right angle so you can see what's going on without any eye strain. Despite all this, the machine's surprisingly light and easy to lug around. Switching between MMA and TIG mode is dead simple—just one button press and you're sorted. Comes with everything you need to get started: 4m WP26 TIG torch, earth return lead, argon regulator, protective carry case, and gas hose. Key Features: Rugged, ergonomic design Dash-Arc Smart Lift TIG Full-featured DC TIG parameters ABAP: Active Balancing Air Passage Smart gas for optimised shielding gas consumption Fan on demand Voltage Reduction Device (VRD) Key power electronic component protection Overcurrent and overheat protection Complete with protective case and TIG leads

Weldgas Single Stage 2 Gauge Propane Side Entry Regulator

Weldgas Single Stage 2 Gauge Propane Side Entry Regulator  3/8" BSP outlet thread connection

Starparts Super Heating Pepperpot Nozzle 5

Starparts Super Heating Pepperpot Nozzle No. 5 The Starparts Super Heating Pepperpot Nozzle No. 5 is a high-performance oxy-acetylene heating nozzle designed to deliver an intense, evenly distributed flame for rapid and efficient heating of large metal sections. Featuring a multi-port "pepperpot" design, the nozzle produces multiple concentrated flame jets that provide fast, uniform heat distribution, making it ideal for heavy-duty industrial heating applications. Manufactured from high-quality copper for excellent thermal conductivity and long service life, the No. 5 pepperpot nozzle is suitable for use in fabrication, shipbuilding, foundries, structural steelwork, engineering workshops, and maintenance operations. It is ideal for pre-heating before welding, straightening steel, bending, shrinking, loosening seized fasteners, and other applications requiring controlled, high-output heating. Designed for compatibility with standard oxy-acetylene heating torches that accept Starparts-style super heating nozzles, this nozzle delivers reliable performance and excellent flame stability in demanding working environments. Key Features: High-performance oxy-acetylene super heating nozzle Multi-port "pepperpot" design for fast, even heat distribution Nozzle Size: No. 5 Manufactured from high-quality copper for durability Produces a stable, high-output heating flame Ideal for heating, bending, straightening and pre-heating steel Suitable for heavy-duty fabrication and industrial applications Precision engineered for reliable performance and long service life Specifications: Product Type: Super Heating Pepperpot Nozzle Brand: Starparts Size: No. 5 Fuel Gas: Acetylene Material: Copper Flame Type: Multi-Port Heating Flame Applications: Pre-heating, Steel Bending, Straightening, Shrinking, Heavy Fabrication, Maintenance, Shipbuilding and General Engineering BTU Output 250,000 - 618,000

Starparts Super Heating Pepperpot Nozzle 4

Starparts Super Heating Pepperpot Nozzle 4 BTU Output 236,000 - 406,000

Starparts Super Heating Pepperpot Nozzle No.3

Starparts Super Heating Pepperpot Nozzle 3 BTU Output 183,000 - 361,000

Starparts Super Heating Pepperpot Nozzle No.2

Starparts Super Heating Pepperpot Nozzle 2 BTU Output 102,000 - 188,000

Starparts Super Heating Pepperpot Nozzle No.1

Starparts Super Heating Pepperpot Nozzle 1 BTU Output 72,000 - 163,000

Starparts Gtech Propane Regulator Single Stage Plugged 25Bar

Starparts Gtech Propane Regulator – Single Stage Plugged 25 Bar The Starparts Gtech Propane Regulator is a high-quality, single-stage regulator designed to provide consistent and safe gas delivery for propane-based welding, cutting, and heating applications. Engineered for durability and reliability, it ensures stable pressure and efficient gas flow under demanding conditions. With a 25 Bar pressure rating and a robust, plugged design, this regulator is suitable for a wide range of industrial and workshop equipment. Its durable construction ensures long-term performance and safe operation, making it ideal for professional users requiring precision gas control. Key Features: Single-stage propane gas regulator 25 Bar maximum pressure for consistent gas delivery Robust plugged design for reliable operation Durable construction for long-lasting use Suitable for welding, cutting, and heating applications Typical Applications: Propane Gas Welding | Oxy-Fuel Cutting | Heating | Industrial Workshop Use   Brand: Starparts Type: Propane Gas Regulator Model: Gtech Single Stage Plugged 25 Bar

Starparts Gtech Type 5 Cutting Torch Shank

Starparts Gtech Type 5 Cutting Torch Shank Controls gas flow to the welding nozzle Conforms to ISO 5172 

Starparts Gtech Lightweight Cutting Torch Shank

Starparts Gtech Lightweight Cutting Torch Shank Controls gas flow to the lightweight welding nozzle Welds mild steel to 8mm (5/16”), cuts to 25mm (1”) 1/4” BSP fittings Suitable for lightweight swaged nozzles Conforms to ISO 5172 

Starparts Gtech Type 5 Welding Mixer

Type 5 Welding Mixer Mixer connects between a shank and a swaged nozzle.

Starparts Gtech Lightweight Mixer

Starparts Gtech Lightweight Mixer Mixer connects between a lightweight shank and a lightweight swaged nozzle

Starparts Gtech Type 5 Cutting Attachment

Type 5 Cutting Attachment Connects type 5 shank for cutting applications up to 150mm (6') For use with Oxygen and Acetylene Designed for the demands of modern welding/fabrication environments  

Starparts Gtech Lightweight Cutting Attachment

Lightweight Cutting Attachment Connects to lightweight shank for cutting applications up to 25mm (1") For use with Oxygen and Acetylene Lightweight range designed for automotive & light sheet metal work Suitable for AFNM cutting nozzles Starparts GTech

Starparts G Tech NM72/75 Extended Reach Cutting Torch

Starparts G Tech NM72/75 Extended Reach Cutting Torch  Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 75° Head 72" Length

Starparts G Tech NM36/75 Extended Reach Cutting Torch

Starparts G Tech NM36/75 Extended Reach Cutting Torch  Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 75° Head 36" Length

Starparts Gtech NM36/90 Gas Cutting Torch

Starparts Gtech NM36/90 Gas Cutting Torch The Starparts Gtech NM36/90 Gas Cutting Torch is a robust, professional-quality oxy-fuel cutting torch designed to deliver outstanding performance for cutting, gouging, and heating applications. Engineered for precision and reliability, the NM36/90 offers excellent balance, comfortable handling, and dependable operation, making it ideal for fabrication workshops, engineering companies, maintenance departments, and industrial environments. Manufactured from high-quality brass and stainless steel components, the torch is built to withstand the demands of daily use while providing accurate gas control and a stable cutting flame. The ergonomic handle and smooth-operating oxygen and fuel valves allow precise flame adjustment, helping to produce clean, accurate cuts across a wide range of steel thicknesses. The Starparts Gtech NM36/90 is compatible with both ANM pattern oxy-acetylene cutting nozzles and PNM pattern oxygen/propane cutting nozzles, giving users the flexibility to operate with either fuel gas depending on the application. Simply select the appropriate nozzle for the material thickness and fuel gas being used. This versatility makes the torch ideal for a wide range of fabrication, maintenance, demolition, agricultural, and industrial cutting applications. Key Features: Professional-grade oxy-fuel gas cutting torch Compatible with ANM pattern oxy-acetylene cutting nozzles Compatible with PNM pattern oxygen/propane cutting nozzles Suitable for use with both acetylene and propane fuel gases Durable brass and stainless steel construction Precision oxygen and fuel control valves Ergonomic handle for comfort and reduced operator fatigue Stable cutting flame for clean, accurate cuts Suitable for cutting, gouging and heating applications Ideal for fabrication, engineering, maintenance and industrial use Designed for long service life and dependable performance Specifications: Product Type: Oxy-Fuel Gas Cutting Torch Brand: Starparts Model: Gtech NM36/90 Fuel Gases: Acetylene or Propane (with the correct nozzle) Nozzle Compatibility: ANM Pattern Oxy-Acetylene Cutting Nozzles & PNM Pattern Oxygen/Propane Cutting Nozzles Construction: Brass and Stainless Steel Applications: Steel Cutting, Heating, Gouging, Fabrication, Construction, Agricultural Repairs and General Engineering Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 90° Head 36" Length

Starparts Gtech NM18/90 Premium Gas Cutting Torch

Starparts Gtech NM18/90 Premium Gas Cutting Torch – Precision Cutting with Professional Durability The Starparts Gtech NM18/90 Premium Gas Cutting Torch is a high-quality oxy-fuel cutting solution designed for precision, reliability, and long-term performance in demanding environments. Featuring an 18” body with a 90° angled head, it offers excellent access and control when cutting in tight or awkward positions. Engineered for use with both oxy-acetylene and oxy-propane setups, this versatile torch is suitable for a wide range of cutting applications, from thin sheet material to heavy-duty steel. Its robust brass and steel construction ensures durability under continuous use, while the ergonomic design provides balanced handling for improved operator comfort. () The integrated lever control enables smooth operation of the cutting oxygen, while dual valve controls allow precise adjustment of the gas mixture for optimal flame performance. Designed in line with industry standards, it delivers consistent, clean cuts and dependable operation across workshop and on-site tasks. () Key Features: 18” length with 90° head for improved access and control Compatible with oxy-acetylene and oxy-propane systems Heavy-duty brass and steel construction for durability Lever-operated cutting oxygen for smooth, responsive control Dual valves for precise gas flow adjustment Suitable for cutting a wide range of material thicknesses (up to approx. 300mm with correct nozzle) Conforms to ISO 5172 standards for safety and performance

Starparts Gtech NM36/75 Gas Cutting Torch

Starparts G Tech NM36/75 Extended Reach Cutting Torch  Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 75° Head 36" Length

Starparts Gtech NM27/90 Gas Cutting Torch

Starparts G Tech NM27/90 Extended Reach Cutting Torch  Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 90° Head 27" Length

Starparts Gtech NM27/75 Gas Cutting Torch

Starparts G Tech NM27/75 Extended Reach Cutting Torch  Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 75° Head 27" Length

Starparts Eco NM18/90 Gas Cutting Torch

Starparts G Tech NM18/90 Eco Cutting Torch  Cut up to 12" (300mm) Everyday Blowpipe Rugged Construction Conforms to ISO 5172 90° Head 18" Length

Starparts Gas Cylinder 90° Adaptor Right Hand Threaded

Gas Cylinder 90° Adaptor Right Hand Threaded makes connecting the regulator easier when cylinders have a big guard round the tap on top

Starparts Double Safety Check Valve 3/8" Right Hand Thread Nut To 3/8" Hosetail

The Double Safety Check Valve 3/8" Right Hand Thread Nut to 3/8" Hosetail is a specialist welding gas safety fitting designed to help prevent reverse gas flow in compatible oxy-fuel welding, cutting, brazing and heating systems. Featuring a 3/8" right-hand threaded nut connection and a 3/8" (10mm nominal) hose tail, this valve provides a practical connection between compatible gas equipment and flexible gas hose assemblies. The integrated non-return valve function allows gas to flow in the intended direction while helping prevent unwanted reverse flow. This is particularly important in oxy-fuel applications, where reverse gas flow can contribute to hazardous mixing of gases within the equipment. Commonly used in professional welding, fabrication and engineering environments, the Double Safety Check Valve is a useful replacement component for maintaining correctly configured gas hose connections. Its 3/8" hosetail fitting makes it suitable for compatible larger-bore gas hoses where the correct gas flow and connection arrangement are required. Key Features Double Safety Check Valve for compatible welding gas equipment 3/8" right-hand threaded nut connection 3/8" (10mm nominal) hosetail Designed to help prevent reverse gas flow Non-return valve functionality Suitable for correctly specified oxy-fuel gas systems Ideal for compatible oxygen hose assemblies Practical replacement gas safety fitting Suitable for professional welding and fabrication workshops Designed for connection to compatible flexible gas hoses Useful for engineering and industrial maintenance applications Typical Applications Suitable for appropriately specified: Oxy-acetylene welding equipment Oxy-fuel cutting systems Oxygen gas hose assemblies Industrial gas supply connections Brazing and heating equipment Welding and fabrication workshops Engineering maintenance Replacement gas hose connections Technical Specification Product Type: Double Safety Check ValveConnection Type: Threaded Nut to HosetailThread Size: 3/8"Thread Direction: Right Hand (RH)Hose Tail Size: 3/8" (10mm Nominal)Valve Function: Non-Return / Reverse Flow PreventionGas Compatibility: Must Be Confirmed for the Intended GasApplication: Compatible Oxy-Fuel Welding & Industrial Gas Equipment Why Use a Welding Gas Check Valve? A gas check valve, also known as a non-return valve, is designed to permit gas flow in one direction while restricting reverse flow. In oxy-fuel welding and cutting systems, reverse-flow protection helps reduce the risk of oxygen and fuel gases mixing within hoses or equipment. Using correctly specified gas safety fittings is an important part of maintaining safe and reliable welding gas equipment. 3/8" Right Hand Nut to 3/8" Hosetail The 3/8" right-hand threaded nut is designed to connect to a compatible gas fitting, while the 3/8" hosetail provides a connection for suitable flexible gas hose. This configuration is particularly useful for replacement hose assemblies where a 3/8" bore hose is required. Always ensure the fitting, hose, gas service and operating pressure are compatible before installation. The Double Safety Check Valve 3/8" RH Nut to 3/8" Hosetail is a practical replacement component for professional welders and engineers requiring reliable gas connections and reverse-flow protection. Important Safety Information: A non-return check valve is not automatically a flashback arrestor and must not be used as a substitute for a correctly specified flashback arrestor. Confirm the manufacturer's specification to establish whether the product provides any additional safety functions. Right-hand threads are commonly associated with oxygen fittings, but thread direction alone does not confirm gas compatibility. Installation and testing should be carried out by a competent person using approved components.

Starparts Double Safety Check Valve 3/8" Right Hand Thread Nut To 1/4" Hosetail

The Double Safety Check Valve 3/8" Right Hand Thread Nut to 1/4" Hosetail is a specialist gas fitting designed to help prevent reverse gas flow within compatible oxy-fuel welding, cutting, brazing and heating equipment. Featuring a 3/8" right-hand threaded nut connection and a 1/4" hose tail, this check valve provides a connection between compatible gas equipment and flexible gas hose. The integrated non-return valve arrangement is designed to allow gas to flow in the intended direction while helping prevent unwanted reverse flow, which can contribute to hazardous gas mixing within oxy-fuel equipment. This type of fitting is commonly used within professional welding and fabrication environments where suitable gas safety components are essential for maintaining a correctly configured gas supply system. The Double Safety Check Valve is a practical replacement component for engineers, welders and maintenance personnel working with compatible industrial gas equipment. Key Features Double Safety Check Valve 3/8" right-hand threaded nut connection 1/4" hose tail connection Designed to help prevent reverse gas flow Suitable for compatible industrial gas systems Non-return valve arrangement Designed for use with appropriate oxy-fuel equipment Useful replacement gas hose fitting Suitable for professional welding and fabrication Compact connection between gas equipment and flexible hose Ideal for engineering and maintenance applications Typical Applications Suitable for appropriately specified: Oxy-fuel welding equipment Oxygen gas hose assemblies Gas cutting equipment Brazing and heating systems Industrial gas supply connections Welding and fabrication workshops Engineering maintenance Replacement gas hose assemblies Technical Specification Product Type: Double Safety Check ValveConnection Type: Threaded Nut to HosetailThread Size: 3/8"Thread Direction: Right Hand (RH)Hose Tail Size: 1/4" (6mm nominal)Valve Function: Non-Return / Reverse Flow PreventionGas Compatibility: Must Be Confirmed for the Intended GasApplication: Compatible Industrial Gas Equipment Why Use a Gas Check Valve? A gas check valve, also known as a non-return valve, is designed to allow gas to travel in one direction while restricting reverse flow. Within oxy-fuel welding and cutting equipment, preventing reverse gas flow is important because it helps reduce the risk of gases mixing in parts of the system where they should remain separate. Correctly specified gas safety components are an essential part of maintaining a safe and reliable gas supply arrangement. 3/8" RH Nut to 1/4" Hosetail Connection The 3/8" right-hand threaded nut provides a connection to suitably matched gas equipment, while the 1/4" hosetail is intended for compatible flexible gas hose. Before installation, ensure the thread type, gas service, hose dimensions and operating pressure are suitable for the intended application. The Double Safety Check Valve 3/8" RH Nut to 1/4" Hosetail is a useful replacement fitting for professional welding and engineering workshops requiring dependable gas hose connections and reverse-flow protection. Important Safety Information: A non-return check valve is not automatically a flashback arrestor and must not be used as a substitute for a correctly specified flashback arrestor. Confirm whether this product provides any additional safety functions beyond reverse-flow prevention. Right-hand threads are commonly associated with oxygen connections, but the thread direction alone does not establish gas compatibility. Only use with the gases and pressures approved by the manufacturer. Installation and testing should be carried out by a competent person in accordance with applicable safety requirements.

Starparts Gas Y Piece Left Hand 3/8" BSP Connections Splitter

Left Hand Threaded Double Outlet Connector • Designed to split a single gas supply to 2 outlets • valve controlled

Starparts Gas 3/8" BSP To 3/8" BSP Equal Male Coupler Right Hand Thread

Gas 3/8" BSP To 3/8" BSP Equal Male Coupler Right Hand Thread Starparts G Tech

Starparts 1/4" BSP Male to 3/8" BSP Male Coupler

1/4" - 3/8" Male RH Coupler Starparts G Tech

Starparts Gas Hose Tail 3/8" BSP Nut To 1/4" Hosetail

Gas Hose Tail – 3/8″ BSP Nut to 1/4″ Hosetail This high‑quality gas hose tail adaptor provides a secure connection from a 3/8″ BSP female threaded gas fitting to a 1/4″ hosetail — ideal for welding gas systems requiring step‑down connections. Precision machined for reliable sealing and durability, it’s a versatile and essential component for professional gas‑shielded welding setups. Key Features & Benefits 3/8″ BSP nut to 1/4″ hosetail — standard sizing for smooth transition between threaded fittings and hose Leak‑resistant connection — precision threads and hosetail profile ensure tight sealing Rugged construction — built to withstand workshop environments and repeated use Multi‑application — suitable for TIG, MIG, plasma and general gas delivery systems Applications Used to connect gas hoses to regulators, gas mixers, welding machines or other components where a 3/8″ BSP female thread must interface with a 1/4″ flexible hose. Ideal for routing gas lines in tight spaces or where hose reductions are needed. Compatibility Fits welding gas systems and accessories that use standard 3/8″ BSP threaded gas ports and 1/4″ internal diameter gas hose.

Starparts Gas Hose Tail 3/8" BSP Nut To 3/8" BSP Hosetail

Gas Hose Tail – 3/8″ BSP Nut to 3/8″ BSP Hosetail This robust 3/8″ BSP nut to 3/8″ BSP hosetail gas hose tail provides a secure and reliable connection between gas hoses and fittings in welding and gas delivery systems. Precision‑manufactured for tight sealing and long‑lasting performance, it’s an essential component for professional TIG, MIG and gas welding setups. Key Features & Benefits 3/8″ BSP nut to 3/8″ BSP hosetail — standard sizing for compatibility with most welding gas hoses and fittings Secure fit — precision machining ensures a tight, leak‑resistant connection Durable construction — built to withstand workshop conditions and repeated use Versatile application — ideal for connecting regulators, gas lines and welding equipment Applications Perfect for linking gas hoses to regulators, gas mixers, welding machines or other gas system components where a 3/8″ BSP connection and hosetail fitting are required.   Compatibility Suitable for use in TIG, MIG and other gas‑shielded welding applications that utilise 3/8″ BSP threaded connections and flexible gas hoses

Starparts Gas Nut 3/8" BSP Right Hand Thread

Gas Nut – 3/8″ BSP Right Hand Thread Ensure a secure and leak-free connection in your welding gas delivery system with this high-quality 3/8″ BSP right hand thread gas nut. Precision machined for consistent fitment and durability, it’s an essential consumable for any TIG, MIG or gas welding setup. Key Features & Benefits Standard 3/8″ BSP right hand thread – compatible with a wide range of regulators, hoses and fittings Precision machined – ensures reliable, tight sealing to prevent gas leaks Durable construction – designed to withstand workshop environments and repeated assembly Versatile use – suitable for TIG, MIG and other gas-shielded welding applications Applications Used to secure and seal gas line connections on welding machines, regulators, gas hoses and accessories where a 3/8″ BSP right hand thread is required. Compatibility Fits any 3/8″ BSP right hand threaded gas port or fitting commonly found on welding equipment and gas system components.

Starparts Propane Gas Hose 10MM(3/8") C/W Check Valves 3/8" Fittings

The Propane Gas Hose 10mm (3/8") is a robust gas hose designed for use with compatible oxy-propane cutting, heating and brazing equipment in professional workshop, fabrication and industrial environments. Featuring a 10mm (3/8") bore, the hose is supplied complete with check valves and 3/8" fittings, providing a convenient solution for replacing worn or damaged hoses or setting up compatible oxy-fuel equipment. The incorporated check valves help prevent reverse gas flow within the system, providing an important additional safety feature. The larger 10mm bore is particularly suited to applications requiring increased gas flow, subject to the requirements of the torch and associated equipment. Suitable for regular professional use, this propane hose is an excellent choice for fabrication shops, engineering companies, maintenance departments and other environments using propane-fuelled cutting and heating equipment. Key Features Designed for propane gas applications 10mm (3/8") bore Supplied complete with 3/8" fittings Check valves included Check valves help prevent reverse gas flow Suitable for compatible oxy-propane equipment Ideal for cutting, heating and brazing applications Suitable for professional workshop and industrial use Robust construction for regular use Typical Applications Ideal for oxy-propane cutting, pre-heating, brazing, fabrication, engineering, maintenance and repair applications where a 10mm bore propane hose is required. Specification Product Type: Propane Gas HoseGas: PropaneBore Size: 10mm (3/8")Fitting Size: 3/8"Check Valves: IncludedApplication: Cutting, Heating & Brazing Please Note: Always ensure the hose, fittings, check valves and associated gas safety equipment are compatible with the gas, operating pressure and equipment being used. • All rubber hose manufactured & tested in accordance with ISO 3821: 2010 • All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Oxygen Fitted Gas Hose 6MM(1/4") Bore C/W Check Valves & 1/4" Fittings

Oxygen Fitted Gas Hose 6MM(1/4") Bore C/W Check Valves & 1/4" Fittings Cutting & Welding Hose• All rubber hose manufactured & tested in accordance with ISO 3821: 2010• All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Oxygen Gas Hose 10MM(3/8") C/W Check Valves & 3/8" Fittings

Oxygen Fitted Gas Hose 10MM(3/8") C/W Check Valves • All rubber hose manufactured & tested in accordance with ISO 3821: 2010 • All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Acetylene Gas Hose 6MM(1/4") Bore C/W Check Valves & 1/4" Fittings

The Acetylene Gas Hose 6mm (1/4") Bore is designed for use with compatible oxy-fuel welding, cutting, brazing and heating equipment, providing a reliable connection between your acetylene gas equipment and torch setup. Featuring a 6mm (1/4") internal bore, the hose is supplied complete with check valves and 1/4" fittings, providing a convenient ready-to-use solution for replacing worn hoses or setting up compatible gas welding and cutting equipment. The incorporated check valves provide an additional safety feature by helping to prevent reverse gas flow within the system. Its robust construction makes this hose suitable for regular use in professional workshops, fabrication environments, maintenance departments and engineering applications. Key Features Designed for acetylene gas applications 6mm (1/4") bore Complete with 1/4" fittings Supplied with check valves Check valves help prevent reverse gas flow Suitable for compatible oxy-fuel equipment Ideal for welding, cutting, brazing and heating applications Suitable for professional workshop and fabrication use Convenient replacement for worn or damaged acetylene hoses Typical Applications Suitable for use with compatible equipment for: Oxy-acetylene welding Gas cutting Brazing Heating Fabrication and engineering Maintenance and repair work Specification Product Type: Acetylene Gas HoseGas: AcetyleneBore Size: 6mm (1/4")Fitting Size: 1/4"Check Valves: IncludedApplication: Oxy-Fuel Welding, Cutting, Brazing & Heating Please Note: Always ensure the hose, fittings and safety devices are compatible with your gas equipment and operating pressures before use. Cutting & Welding Hose• All rubber hose manufactured & tested in accordance with ISO 3821: 2010• All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Acetylene Fitted Gas Hose 10MM(3/8") C/W Check Valves 3/8" Fittings

The Acetylene Gas Hose 10mm (3/8") is a heavy-duty gas hose designed for use with compatible oxy-acetylene welding, cutting, brazing and heating equipment in professional workshop and industrial environments. Featuring a 10mm (3/8") bore, this hose is supplied complete with check valves and 3/8" BSP fittings, providing a convenient solution for replacing existing hoses or setting up compatible oxy-fuel equipment. The fitted check valves help prevent reverse gas flow, adding an important safety feature to the gas supply system. The larger 10mm bore makes this hose particularly suitable for applications requiring a higher gas flow, subject to the requirements of the equipment being used. Key Features Designed specifically for acetylene gas 10mm (3/8") bore Supplied with 3/8" BSP fittings Check valves included Check valves help prevent reverse gas flow Suitable for compatible oxy-acetylene equipment Ideal for welding, cutting, brazing and heating Suitable for professional workshop and industrial applications Robust construction for regular use Typical Applications Suitable for oxy-acetylene welding, gas cutting, brazing, heating, fabrication, engineering, maintenance and repair applications where a 10mm bore acetylene hose is required. Specification Product Type: Acetylene Gas HoseGas: AcetyleneBore Size: 10mm (3/8")Fitting Size: 3/8" BSPCheck Valves: IncludedApplication: Welding, Cutting, Brazing & Heating Please Note: Always ensure the hose, fittings, check valves and associated safety equipment are suitable for the gas, operating pressure and equipment being used. • All rubber hose manufactured & tested in accordance with ISO 3821: 2010 • All fitted hoses manufactured in accordance with & tested to EN1256 : 2006

Starparts Flashback Arrestor In-Line Oxygen Regulator Side

Starparts G Tech Flashback Arrestor In-Line Oxygen Conforms to EN 730-1, ISO 5175  Avoids dangerous gas mixtures by a gas non return valve (NV)  Stops flashback through flame arrestor (FA)  A temperature sensitive cut off valve stops the gas flow when a pre-determined temperature is exceeded (TV)  Every safety device is 100% tested  A dust filter protects the gas non return valve against contamination   

Starparts Flashback Arrestor In-Line Fuel/Gas Regulator Side

Starparts GTech Flashback Arrestor In-Line For Fuel Gas Ensure maximum safety in your gas welding and cutting operations with the GTech Flashback Arrestor In-Line for Fuel Gas. Designed to prevent dangerous flashbacks, this essential safety device protects both operators and equipment by stopping reverse gas flow and potential explosions. Key Features: Reliable Flashback Protection – Effectively stops reverse gas flow to prevent dangerous accidents. In-Line Design – Easy to install within your fuel gas system for seamless operation. High-Quality Construction – Built for durability and long-lasting performance. Enhanced Safety Compliance – Meets industry safety standards for peace of mind. Compatible with Fuel Gases – Ideal for use in oxy-fuel applications, welding, and cutting setups. Whether you’re a professional welder or a workshop operator, the GTech Flashback Arrestor is a crucial safety addition to your setup. Keep your work environment secure and compliant with this high-performance, easy-to-install solution. Tech Specs: Conforms to EN 730-1, ISO 5175 Avoids dangerous gas mixtures by a gas non return valve (NV) Stops flashback through flame arrestor (FA) A temperature sensitive cut off valve stops the gas flow when a pre-determined temperature is exceeded (TV)  Every safety device is 100% tested A dust filter protects the gas non return valve against contamination 

Jasic JM272S Separate Wire Feed Inverter MIG Welder Package - Water Cooled

Jasic MIG 272 Separate Inverter Welder - Water Cooled The Jasic MIG 272S Separate Inverter Welder represents the pinnacle of welding technology, offering a powerful, versatile solution for professionals seeking superior welding performance. Part of the esteemed Jasic 270 series, this machine is distinguished by its advanced IGBT welding components, designed to handle demanding and repetitive welding cycles with unparalleled reliability and efficiency. At the heart of the Jasic MIG 272S is state-of-the-art control circuitry complemented by a digital A/V display. This feature allows welders to monitor and adjust welding parameters precisely, ensuring optimal control over the welding process and enabling superior weld quality and consistency. This modular package boasts excellent welding characteristics and demonstrates an impressive duty cycle of 270A at 30%, running off a single-phase 230V input. This high-duty cycle increases productivity, allowing longer welding periods with less downtime. It is ideal for workshops, fabrication sites, and industrial applications where efficiency and reliability are paramount. The Jasic MIG 272S's versatility is evident in its ability to work with various wire sizes and types. It can smoothly handle solid steel wires up to 7.9mm, stainless steel solid wires up to 9.5mm, and aluminium solid wires up to 9.5mm. Furthermore, it can use flux-cored steel wire up to 6.4mm, offering a comprehensive range of welding solutions for different materials and thicknesses. This comprehensive package includes the MIG inverter machine power source, a robust 4-roll wire feed unit for consistent wire feeding, a 5-metre interconnecting cable for flexibility in setup, a high-quality MIG welding torch, a work return lead and clamp, and a gas hose with regulator for complete setup out of the box. The Jasic MIG 272S Separate Inverter Welder embodies advanced welding technology, offering unmatched performance, versatility, and reliability. Whether for industrial fabrication, automotive repairs, or construction projects, this machine is engineered to meet the highest standards of professional welding. Key Features: Single Phase IGBT MIG inverter welder High-powered 230V welding machine Digital amp and volt meters 4 Roll wire feed unit High duty cycle - single-phase inverter Advanced control circuitry Suitable for 0.6/0.8/1.0 and 1.2mm wires Burn back control & wire inching 2T/4T trigger function Power & status LED's Gas check function Variable inductance Inverter trolley takes a full-size gas cylinder AVR generator friendly  What is included in this package? MIG inverter machine power source 4 roll wire feed unit 5 metre interconnecting cable Water-cooled MIG welding torch Work return lead and clamp Gas hose and regulator.  Water Cooler Tank  

Nylon Reinforced Clear Gas Hose 30Mtr Reel

Nylon Reinforced Clear Gas Hose 30Mtr Reel Ideal for making up welder gas hoses from machine to regulators

3M Speedglas Heavy Duty Rubber Adflo Breathing Tube

3M Speedglas Heavy Duty Rubber Adflo Breathing Tube  Heavy duty breathing tube, recommended for use in harsh working environments Quick Release Swivel (QRS) for one handed connection and disconnection Robust rubber breathing tube, helping prevent damage caused by snagging and sharp edges Compatible with current program of welding helmets and face shields from 3M and 3M Adflo Powered Air Respirator or 3M Versaflo Supplied Air Regulator V-500E Extend the service life of your breathing tube by using a tube cover (834018)

Gas Y Piece Right Hand 3/8" BSP Thread For Oxygen / Argon Gas With Taps

The Double Safety Check Valve 3/8" Right Hand Thread Nut to 3/8" Hosetail is a specialist welding gas safety fitting designed to help prevent reverse gas flow in compatible oxy-fuel welding, cutting, brazing and heating systems. Featuring a 3/8" right-hand threaded nut connection and a 3/8" (10mm nominal) hose tail, this valve provides a practical connection between compatible gas equipment and flexible gas hose assemblies. The integrated non-return valve function allows gas to flow in the intended direction while helping prevent unwanted reverse flow. This is particularly important in oxy-fuel applications, where reverse gas flow can contribute to hazardous mixing of gases within the equipment. Commonly used in professional welding, fabrication and engineering environments, the Double Safety Check Valve is a useful replacement component for maintaining correctly configured gas hose connections. Its 3/8" hosetail fitting makes it suitable for compatible larger-bore gas hoses where the correct gas flow and connection arrangement are required. Key Features Double Safety Check Valve for compatible welding gas equipment 3/8" right-hand threaded nut connection 3/8" (10mm nominal) hosetail Designed to help prevent reverse gas flow Non-return valve functionality Suitable for correctly specified oxy-fuel gas systems Ideal for compatible oxygen hose assemblies Practical replacement gas safety fitting Suitable for professional welding and fabrication workshops Designed for connection to compatible flexible gas hoses Useful for engineering and industrial maintenance applications Typical Applications Suitable for appropriately specified: Oxy-acetylene welding equipment Oxy-fuel cutting systems Oxygen gas hose assemblies Industrial gas supply connections Brazing and heating equipment Welding and fabrication workshops Engineering maintenance Replacement gas hose connections Technical Specification Product Type: Double Safety Check ValveConnection Type: Threaded Nut to HosetailThread Size: 3/8"Thread Direction: Right Hand (RH)Hose Tail Size: 3/8" (10mm Nominal)Valve Function: Non-Return / Reverse Flow PreventionGas Compatibility: Must Be Confirmed for the Intended GasApplication: Compatible Oxy-Fuel Welding & Industrial Gas Equipment Why Use a Welding Gas Check Valve? A gas check valve, also known as a non-return valve, is designed to permit gas flow in one direction while restricting reverse flow. In oxy-fuel welding and cutting systems, reverse-flow protection helps reduce the risk of oxygen and fuel gases mixing within hoses or equipment. Using correctly specified gas safety fittings is an important part of maintaining safe and reliable welding gas equipment. 3/8" Right Hand Nut to 3/8" Hosetail The 3/8" right-hand threaded nut is designed to connect to a compatible gas fitting, while the 3/8" hosetail provides a connection for suitable flexible gas hose. This configuration is particularly useful for replacement hose assemblies where a 3/8" bore hose is required. Always ensure the fitting, hose, gas service and operating pressure are compatible before installation. The Double Safety Check Valve 3/8" RH Nut to 3/8" Hosetail is a practical replacement component for professional welders and engineers requiring reliable gas connections and reverse-flow protection. Important Safety Information: A non-return check valve is not automatically a flashback arrestor and must not be used as a substitute for a correctly specified flashback arrestor. Confirm the manufacturer's specification to establish whether the product provides any additional safety functions. Right-hand threads are commonly associated with oxygen fittings, but thread direction alone does not confirm gas compatibility. Installation and testing should be carried out by a competent person using approved components.

Jasic Evo EM160C PFC Compact Inverter MIG Welder Package

Jasic EVO MIG 160 PFC Compact Inverter Introducing the Jasic EVO MIG 160 PFC Compact Inverter, which comes with a comprehensive 5-year warranty and delivers professional-grade welding performance with reliability you can trust. This package includes essential components: the Inverter Power Source, a 3-meter MIG Torch, a 3-meter Earth Cable and clamp, an Argon Regulator, and a Gas Hose, ensuring you have everything you need to get started right away. Designed for durability and ease of use, the Jasic EVO MIG 160 boasts a rugged, ergonomic design that enhances operational comfort and efficiency. Equipped with Clearvision Technology, welders can enjoy enhanced visibility, promoting precision and accuracy in their work. Experience intelligent welding with the integrated Synergic Control, which automatically adjusts parameters for optimal performance, streamlining the welding process. Thanks to its adaptable wide voltage range, this inverter easily caters to various welding needs. The inclusion of Welding Engineer Mode and Smart Lift TIG functionality further extends this machine's versatility, allowing for precise control and customization to suit specific welding tasks. Expect consistent and efficient MIG spot welding performance, ensuring high-quality welds every time. For added convenience, flexible remote control solutions are available as an optional feature, enhancing usability and adaptability. Featuring Power Factor Correction (PFC) and generator-friendly design, the Jasic EVO MIG 160 operates efficiently while minimizing energy consumption, making it an environmentally conscious choice. Quick factory reset capability and ultra-efficient auto sleep mode enhance operational efficiency, while compatibility with MIG digital torches and spool guns ensures versatility and adaptability to evolving welding needs. LED lighting inside the wire feeder cabinet, Active Balancing Air Passage (ABAP), and Fan-on-Demand cooling create a comfortable and productive working environment. Safety is paramount, and this inverter is equipped with a Voltage Reduction Device (VRD), key power component protection, and overcurrent and overheat protection, ensuring a secure and reliable welding experience. Elevate your welding capabilities with the Jasic EVO MIG 160 PFC Compact Inverter, a professional-grade solution designed to meet the demands of modern welding applications. Key Features: Rugged, ergonomic design Clearvision Technology Intelligent Synergic COntrol Adaptable wide voltage Welding engineer mode Smart lift TIG Consistent & efficient MIG spot welding  performance Flexible remote control solutions(optional) Power factor correction(PFC) Generator friendly Quick factory reset  Ultra efficient auto sleep mode Compatible with MIG digital torch & spool guns LED inside wire feeder cabinet ABAP- active balancing air passage Fan on demand cooling Voltage reduction device (VRD) Key power component protection Overcurrent & overheat protection

G-Tech Gas Equipment Starparts G-Tech NM48/75 Gas Cutting Torch

Starparts G Tech NM48/75 Extended Reach Cutting Torch    Cut up to 12" (300mm) Premium Quality Blowpipe Rugged Construction Conforms to ISO 5172 75° Head 48" Length

Vortex Mapp Gas MAP-X Gas

Vortex Mapp-X Gas (VG1) – 400g Canister High-Performance Fuel for Soldering & Brazing Applications The Vortex Mapp-X Gas (VG1) is a premium-grade fuel designed for professionals requiring high-temperature capabilities in soldering and brazing tasks. Contained in a 400g non-refillable canister, this gas mixture delivers a consistent and intense flame, making it suitable for various industrial applications. Key Features: High-Temperature Performance: Burns up to 10% hotter than standard Map-style gases, ensuring efficient heat application for demanding tasks. Optimized Mixture: Composed primarily of propylene and propane, providing a stable and powerful flame. Compatibility: Designed for use with most CGA600 threaded torches, offering versatility across different equipment. Safety Compliance: Manufactured to meet stringent safety standards, ensuring reliable and secure usage. Typical Applications: Soldering & Brazing: Ideal for joining metals in plumbing, HVAC, and automotive industries. Metalworking: Suitable for tasks requiring precise heat application, such as heat treating and surface preparation. DIY Projects: Perfect for home improvement tasks involving metal components. Specifications: Product Code: VG1 Weight: 400g Type: Non-refillable canister Gas Composition: Propylene and propane mixture Thread Type: CGA600 Safety Classification: Flammable gas, under pressure Usage Instructions: Preparation: Ensure the work area is well-ventilated and free from flammable materials. Connection: Attach the canister securely to a compatible CGA600 threaded torch. Operation: Ignite the torch according to the manufacturer's instructions, adjusting the flame as needed for the task. Storage: After use, close the valve and store the canister in a cool, dry place away from direct sunlight and heat sources.

Jasic EVO EM250 PFC MIG Welder Package On Trolley 110/230V

Jasic EVO MIG 250 CT Inverter Welder The EVO MIG 250 CT from Jasic features a rugged and ergonomic design that not only looks the part but is designed to make welding more efficient and straightforward, from its slanted control panel, which provides enhanced visibility with ClearVision technology offering a crisp and clear reading even in direct sunlight to the sloped front grill that provides a perfect balance between heat dissipation and ingress protection. The built-in Intelligent Synergic Control enables you to set up your welder faster than ever before. With built-in synergic programs, all you have to do is input some basic information, and the machine does the rest for you, picking the optimal settings for your weld. Whether you are MIG, TIG or MMA welding, the Jasic EVO MIG 250 CT PFC Inverter has you covered with a High arc ignition response rate for excellent consistency, delivering 60+ manual weld spots per minute for ultimate MIG spot welding performance. The trigger-controlled DC Lift Arc ignition enables the arc to be started easily by touching the tungsten to the workpiece and lifting it back up. This stops the tungsten from sticking to the workpiece and breaking the tip. It also features Anti-Stick technology, Arc Force, and Hot Start functionalities designed to improve weld quality and ease of use whilst MMA welding. Not only is it designed to streamline welding, but it is also designed to be energy-efficient, with features such as auto-sleep mode and an energy-saving smart fan, both of which are designed to save power and reduce energy costs. The Jasic EVO MIG 250 CT PFC Inverter welder has you covered, offering a wide range of features and technical specifications. Have a look at the list below to find out more. What's Included in the Kit: Jasic EVO MIG 250 CT PFC Inverter Trolley MIG Torch 4m Regulator Hose Earth Lead Why We Love The New Jasic Evo 2.0 MIG250 PFC Dual Voltage Package  ClearVision technology Intelligent synergic control Adaptable wide input voltage range: 110/230V Welding engineer mode allows more in-depth parameter changes Smart DC lift TIG Consistent and efficient MIG spot welding performance. Flexible remote control solutions. Generator friendly. Auto sleep mode for improved energy efficiency. Compatible with digital control MIG torch, as well as spool gun. LED light inside wire feed cabinet for improved vision. Cooling fan on demand. Voltage reduction device for improved safety. Overcurrent and overheat protection.

Jasic Evo MIG EM200C PFC Compact MIG Welder Package 110/230V

Jasic EVO MIG 200 PFC Inverter Welder The Jasic EVO MIG 200 PFC Inverter Welder features a rugged and ergonomic design. The handle elevates the overall aesthetic of the welder whilst also providing a comfortable and firm grip that is glove-friendly. The control panel features a 45 ° angle for enhanced visibility even under direct sunlight, and the front grille also features a slanted design that offers a perfect balance between heat dissipation and ingress protection. Featuring the latest technology, the 200 PFC welder comes with Intelligent Synergic Control, which means that setting up for a weld has never been faster. Input the correct information, and the machine will do the rest. It will pick the optimal settings for your weld. Built-in power factor correction improves the overall efficiency and enables compatibility with AVR generators. Welding engineer mode provides access to adjust in-depth parameters, allowing for greater freedom in parameter customisation. With features such as auto-sleep mode and an energy-saving smart fan, you can be assured that this welder is not only a great choice but also a sustainable one. The auto sleep mode saves energy by automatically putting the device into sleep mode after 10 minutes of inactivity, and the energy-saving smart fan helps reduce energy costs and conserve power. What's Included in the Kit: Jasic EVO MIG 200 PFC Inverter MIG Torch 3m Regulator Hose Earth Lead Why We Love The New Jasic Evo MIG 200 PFC Inverter Welder  Rugged, ergonomic design ClearVision technology Intelligent synergic control Adaptable wide voltage range Welding engineer mode Smart Lift TIG Consistent and efficient MIG spot welding performance Flexible remote control solutions (optional) Power factor correction (PFC), generator-friendly Quick factory reset; auto sleep mode Compatible with MIG digital torch and spool gun LED inside wire feed unit; handy accessory storage slot ABAP: Active Balancing Air Passage Fan on demand Voltage Reduction Device (VRD) Key power electronic component protection Overcurrent and overheat protection  

Jasic EVO TIG ET200P PFC Pulse Air-Cooled DC TIG Welder Package 110/230V

Jasic EVO 2.0 TIG 200P DC TIG Welder The Jasic EVO 2.0 TIG 200P is a next-generation DC TIG inverter built for welders who demand precision, reliability, and modern control in a compact, industrial package. Part of the new EVO 2.0 series, this machine combines a rugged, ergonomic design with an intuitive human-machine interface, delivering outstanding performance in workshop and site environments alike. Engineered with Dash-Arc high-frequency ignition and Smart Lift-TIG technology, the TIG 200P delivers fast, reliable arc starts with excellent control. Full DC pulse TIG functionality allows fine adjustment of pulse parameters, helping you manage heat input, improve bead appearance, and achieve consistent results on thin or heat-sensitive materials. Smart Gas technology further enhances efficiency by automatically optimising post-flow gas times, reducing waste without compromising weld quality. Designed for real-world conditions, the EVO 2.0 TIG 200P features power factor correction (PFC) for improved energy efficiency and generator compatibility, along with a wide input voltage range for dependable performance wherever you’re working. ABAP (Active Balancing Air Passage) cooling and a fan-on-demand system protect key components while reducing noise and power consumption, supported by auto sleep mode for maximum efficiency. Safety and durability are built in as standard, with VRD, overcurrent and overheat protection, and comprehensive electronic safeguarding. Optional remote control solutions provide added flexibility, while quick factory reset ensures simple recovery from incorrect settings. Supplied complete with TIG torch, earth lead, gas hose, and regulator, the EVO 2.0 TIG 200P is ready to work straight out of the box. Backed by a 5-year warranty, the Jasic EVO 2.0 TIG 200P DC TIG Welder delivers modern technology, dependable performance, and long-term peace of mind—engineered to perform today and built to last. Key Features 5 Years Warranty  Rugged, robust, and industrial look with ergonomic design Clear Vision technology Adaptable wide voltage range Dash-Arc Smart Lift TIG Full-featured DC pulse TIG parameters Flexible remote control solutions (Optional) Power factor correction (PFC), Generator friendly Quick factory reset; auto sleep mode ABAP: Active Balancing Air Passage Smart Gas for optimised shielding gas consumption Fan cooling on demand Voltage Reduction Device (VRD) Key power electronic component protection Over current and overheat protection Complete with tig torch, earth lead, gas hose and regulator

Jasic JM500P Pulse 500A Seperate Watercooled MIG Welder

Jasic JM500P Pulse 500A MIG Welder The Jasic MIG 500P is a high quality digital MIG/MAG power source. It provides low spatter consistent welding with minimal rework on a wide range of materials. The Jasic MIG 500P provides multi process pulsed MIG, synergic MIG, TIG and MMA options for a wide range of applications KEY FEATURES IGBT multi process inverter Pulsed MIG, MIG/MAG, TIG and DC MMA Synergic or standard operating modes Smart fan and water control Job storage system 4 roll wire feed unit Suitable for 0.8, 1.0, 1.2 and 1.6mm welding wire Easy parameter settings for the operator Synergic curves for common materials & wire diameters Self diagnostic system Encoder feedback control of wire feed system Power & status LED’s Inverter trolley takes full size gas bottle

Weld Star Weldstar Infinium Multi-Process Pulse Welder 4 In 1 200A MIG, AC/DC TIG & MMA

Weld Star 4 in 1 Multi Process Welder 200 Amp Package The Weld Star Infinium inverter multi process machine has been designed to incorporate the most advanced features and technology offering the operator a user friendly interface via the 5”LCD screen. Advanced IGBT multi-process inverter technology which is compact andlightweight at only 20KG PFC technology offering multiple advantages such as energy efficiencyand wide range input voltage from 95Vac – 265Vac Generator friendly Automatic dual voltage input detection Smart fan – reduces power consumption and intake of dust and fumes IP23 protection Built to EN-60974-1 and is fully compliant with the European CommissionRegulation 2019/1784, CE and UKCA With synergic MIG/MAG, welding parameters can be automatically selectedbased on material thickness and voltage with synergic curves for commonmaterials and wires Built in TIG welding features such as HF or Lift TIG, pre/post flow gastimes, 2T/4T, slope up/down and pulse, all to ensure excellent TIG weldingcharacteristics in both AC and DC Smart TIG function with advanced TIG welding features such as multi-wave,Q start and hybrid TIG, whilst still maintaining ease of set up for the user DC and AC MMA suitable for a wide range of electrodes Advanced MMA features such as pulse and automatic current regulationbased on electrode diameter Built in hot start arc ignition function which ensures excellent arc ignition inMMA for easier and more reliable arc starting with built in self adaptive arcforce technology which maintains the optimum MMA arc conditions duringoperation even with long welding cables In-built VRD (MMA and TIG mode only) Ability to save up to 10 stored programmes for quick set up Advanced error code menu for ease of fault and troubleshooting diagnosis Panel mounted USB connection for quick and easy firmware updates

EWM Phoenix XQ350 Compact Water-Cooled MIG Welder With Expert Panel

Phoenix XQ350 Compact Water-Cooled MIG Welder With Expert Panel MIG/MAG inverter welding machine, with Expert 2.0 technology, pulse and separate wire feeder. This EWM welder is a decompact, demodular- all round welder with all the characteristics expected of a professional welding machine, included in this package is main machine, drive xq wire feeder, drive XQ HP, wire spool adapter, MIG/MAG welding torch (Water cooled, 4m), Workpiece lead with clamp (70mm^2) Gas hose (2M), pressure regulator, coolant and mains plug. Why we love the EWM Phoenix XQ350 Puls CW EX: MIG/MAG inverter welding machine including Expert XQ 2.0 control, pulse, with separate wire feeder Supplied with: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling and 5 m mains connection lead. Ideal for perfect MIG/MAG weld seams even with long welding leads. Seamless synergic control with one-knob operation. No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works. Has innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld for aluminium. Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium. Fully manual operation for Non Synergic operation where requiried. Suitable for MIG/MAG, MMA welding, TIG welding and gouging. Individually configurable programmes for each welding task (JOB). Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires. Start and end-crater function fully adjustable. Infinitely adjustable arc dynamics (choke effect). Accessories and optional extras fit the flexFit casing system: Parts available to purchase and then fixed to the welding machine using conventional slot nuts. LED information bar: Indicates the current operating status. High efficiency and standby function. Connection capability for remote control and function torch. Easy, tool-free change of welding polarity. Earth fault monitoring (PE protection). IP23 spray water protected. Network connectivity with the ewm Xnet software via an integrated or external gateway is optional. PC interface for PC300 XQ software. The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables. Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355. The price shown includes the following components:   Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Phoenix-XQ350-PULS-DW-EX

EWM Phoenix XQ350 Puls DW EX:  MIG/MAG inverter welding machine, with Expert 2.0 technology, pulse and separate wire feeder. This EWM welder is a decompact, demodular- all round welder with all the characteristics expected of a professional welding machine, included in this package is main machine, drive xq wire feeder, drive XQ HP, wire spool adapter, MIG/MAG welding torch (Water cooled, 4m), Workpiece lead with clamp (70mm^2) Gas hose (2M), pressure regulator, coolant and mains plug.  Why we love the EWM Phoenix XQ350 Puls DW EX: MIG/MAG inverter welding machine including Expert XQ 2.0 control, pulse, with separate wire feeder Supplied with: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling, 8-pole interface for scanner + scanner holder, and 5 m mains connection lead Ideal for perfect MIG/MAG weld seams even with long welding leads Seamless synergic control with one-knob operation No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery.  Has innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld for aluminium Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium Fully manual operation for Non Synergic operation where required Suitable for MIG/MAG, MMA welding, TIG welding and gouging Individually configurable programmes for each welding task (JOB) Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires Start and end-crater function fully adjustable Infinitely adjustable arc dynamics (choke effect) Accessories and optional extras fit the flexFit casing system: Parts available to purchase and then fixed to the welding machine using conventional slot nuts LED information bar: Indicates the current operating status High efficiency and standby function Connection capability for remote control and function torch Easy, tool-free change of welding polarity Earth fault monitoring (PE protection) IP23 spray water protected Network connectivity with the ewm Xnet software via an integrated or external gateway is optional PC interface for PC300 XQ software The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S35

EWM Phoenix XQ400 PULS Seperate Water-Cooled MIG Welder 415V

Phoenix XQ400 PULS Seperate Water-Cooled MIG Welder 415V MIG/MAG inverter welding machine, pulse and separate wire feeder. This EWM welder is a decompact, demodular- all round welder with all the characteristics expected of a professional welding machine, included in this package is main machine, drive xq wire feeder, drive XQ HP, wire spool adapter, MIG/MAG welding torch (Water cooled, 4m), Workpiece lead with clamp (70mm^2) Gas hose (2M), pressure regulator, coolant and mains plug. This machine is not capable of Expert 2.0 technology, it does not have controls on the machine but it is controlled exclusively through the wire feeder selected.  Why we love the EWM Phoenix XQ600 Puls DW: MIG/MAG inverter welding machine including Expert XQ 2.0 control, pulse, with separate wire feeder Supplied with: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling and 5 m mains connection lead Ideal for perfect MIG/MAG weld seams even with long welding leads Seamless synergic control with one-knob operation No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Has innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld for aluminium Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium Fully manual operation for Non Synergic operation where requiried Suitable for MIG/MAG, MMA welding, TIG welding and gouging Individually configurable programmes for each welding task (JOB) Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires Start and end-crater function fully adjustable Infinitely adjustable arc dynamics (choke effect) Accessories and optional extras fit the flexFit casing system: Parts available to purchase and then fixed to the welding machine using conventional slot nuts LED information bar: Indicates the current operating status High efficiency and standby function Connection capability for remote control and function torch Easy, tool-free change of welding polarity Earth fault monitoring (PE protection) IP23 spray water protected Network connectivity with the ewm Xnet software via an integrated or external gateway is optional PC interface for PC300 XQ software The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 The price shown includes the following components:   Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Titan XQ400 Puls Expert Panel Seperate Digital Water-Cooled MIG Welder 415V

Titan XQ400 Puls Seperate Digital Water-Cooled MIG Welder 415V MIG/MAG inverter welding machine with expert XQ 2.0 Control, Pulse and separate wire feeder. This EWM welder is a decompact, all round welder with all the characteristics expected of a professional welder, included in this package is: Drive XQ wire feeder with Drive XQ HP, pivot support for wire feeder, water cooled, 14 pol 1.8m intermediate hose package, wire spool adaptor, MIG torch with OLED screen which is water cooled, has X technology and is 4m in length, workpiece clamp, pressure regulator, coolant and mains plug. Why we love the EWM Titan XQ400 Puls DW EX MIG/MAG inverter welding machine includes Expert XQ 2.0 Control, pulse and separate wire feeder. Equipment Provided: Welding machine with Expert XQ 2.0 Control, including wheel kit with single cylinder bracket, water cooling and 5m mains connection lead Perfect MIG/MAG weld seams even with long welding leads Synergic control with one-knob operation No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld Has Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium Manual setting of welding parameters is available using Non-Synergic operation. Suitable for MIG/MAG, MMA welding, TIG welding and gouging Individually configurable programmes for each welding task (JOB) Start and end-crater functions adjustable Forever adjustable arc dynamics (choke effect) Accessories and optional extras fit with flexFit casing system: Using conventional slot nuts LED information bar: Indicates the current operating status Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires High efficiency and standby function available Connection capability for remote control and function torch No tools needed for change of welding polarity Monitoring of Earth fault available (PE protection) IP23 spray water protected Optional network connectivity with the ewm Xnet software via an integrated or external gateway PC interface for PC300 XQ software The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 The price shown includes the following components:   Titan XQ 400 puls decompact, including all characteristics and welding processes Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Titan XQ 350 Pulse Seperate Watercooled MIG Welder With Expert Panel

EWM Titan XQ 350 Puls DW EX MIG/MAG inverter welding machine with expert XQ 2.0 Control, Pulse and separate wire feeder. This EWM welder is a decompact, all round welder with all the characteristics expected of a professional welder, included in this package is: Drive XQ wire feeder with Drive XQ HP, pivot support for wire feeder, water cooled, 14 pol 1.8m intermediate hose package, wire spool adaptor, MIG torch with OLED screen which is water cooled, has X technology and is 4m in length, workpiece clamp, pressure regulator, coolant and mains plug. The welding machine has intuitive XQ Expert control which allows user to set all parameters easily, switch between processes and procedures such as ForceArc/ForceArc Puls to RootArc/RootArc Puls or Standard/pulse. This Expert machine with OLED screen also features; arc length correction, adjustment of arc dynamics (the choke effect), standby function, kilowatt display and effective arc power for calculating the energy per unit length. Why we love the EWM Titan XQ350 Puls DW EX Perfect for creating MIG/MAG seams, even with long welding leads. Innovative EWM Synergic characteristics- Rootarc XQ/Rootarc PulsXQ, Cold arcXQ/Coldarc PulsXQ, Forcearc/Forcearc PulsXQ, Wiredarc XQ/WiredarcPuls XQ, Puls/Superpuls and Positionweld. Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/Aluminium. Non-synergic operation for manual setting of weld parameters. Also suitable for MMA welding, TIG welding and gouging Adjustable start and end-crater functions Infinitely adjustable arc dynamics (choke effect) flexFit casing system: Many accessory parts and options can be fixed to the welding machine using conventional slot nutse Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumablesg Adjustable hot start current and hot start time Optional network connectivity with the ewm Xnet software via an integrated or external gateway IP23 spray water protected Connection capability for remote control and function torch Energy-saving thanks to high efficiency and standby function Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires Equipment as supplied: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, 1.8Mtr Interconnecting Cables, water cooling and 5m mains connection lead The price shown includes the following components:   Titan XQ 350 puls decompact, including all characteristics and welding processes Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

Parweld XTM211DI-P2 Multi Process Welder Package

Parweld XTM 211Di P2 MIG, DC TIG or MMA machine; The Parweld XTM211Di MIG, AC/DC TIG or MMA welder is a multipurpose machine ideal for welding steel, stainless steel or aluminium. This machine is capable of 3 different processes- MIG, DC TIG and MMA welding. This lightweight machine is compact and is housed in a metal housing with added carry handle, the total weight of the machine is 27.5kg. The torch can be remote controlled, this allows for parameters to be changed and process adjusted quickly and easily. The Parweld XTM211i has a dual voltage of 110 and 240V, this means that the device is ideal for use with generators or on-site. The LED digital display is large and provides a high-quality resolution, it is simple and easy to use but allows for full control when required. The option of full synergic control allows for rookie welders to gain experience but also maintains full customisation of parameters for professionals. A 15kg reel capacity means that the Parweld XTM211i is ideal for heavy industrial work as minimal reel changes are required. Additional features not usually found on other similar multi-process welding machines increase the usability of this product, the AC and DC TIG welding functions plus the high frequency welding functions ensure that this product is worth the money. The ability to weld aluminium, mild steel and stainless steel means this machine stands out from the crowd with it’s lift TIG arc ignition function. High frequency ignition ensures less inclusions at the start of the weld run and a nicer arc start. The adjustable pulse frequency makes welds look better and use less heat, this prevents distortion of materials. Thick materials can be welded with ease using the 200A output allowing materials up to 15mm thick using a 4mm rod. This machine also has automatic polarity switching. In summary, this multi-process machine is a 4 in 1 welder which is easy to use for professionals and amateurs alike. It allows for full control of all parameters through both the torch remote control and LED digital display.   *This package comes with MIG, TIG and Stick lead, if you are looking for MIG only package click here.    Parweld XTM 211Di P2 Package Comes Ready To Weld With: XTM 211 Multi-Process Machine Earth lead 2 x gas hoses 1 x regulator 1 x set of 0.8/1.0mm rollers  MIG Torch  TIG Torch  Stick lead   Key Features Compact & Portable The XTM 211Di is an ideal welder for site work due to its compact and portable size.   Two Roll Wire Feeder The built-in two-roll wire feeder allows for a smooth, strong input wire feed into the welding gun.   2T/4T Control Functions The 2T/4T trigger latching function makes this the ideal welder for long welding jobs. Switching on the 4T functionality means that the torch trigger is switched on without you having to hold the torch down. This reduces ‘finger fatigue’ when welding and allows for smoother continuous welds.   Smart Switching The XTM 211Di comes with built-in smart switching functionality. The machine can automatically switch between 110V and 230V, making it very efficient.     Parweld XTM 211Di Features: 110V / 230V dual voltage Multi-process MIG/TIG/MMA Quick and easy selection of welding process, control type, material and wire size Synergic control 2T/4T trigger latching Real-time display of parameters and data on high quality digital display Pulse TIG functionality for superior arc control Rapid set up using synergic control Memory functionality for all processes to save and recall programs Supplied with MIG torch, TIG torch and Earth lead MIG weld materials from 0.9mm to 15mm Welds steel, stainless steel or aluminium

G-Tech Gas Equipment Gtec Single Flint Lighter With 5 Flints

The GTEC Single Flint Lighter with 5 Flints is a practical and reliable welding spark igniter designed for safely and conveniently lighting compatible oxy-fuel welding, cutting, brazing and heating torches. Featuring a traditional single flint striker design, this handheld gas torch lighter generates sparks through a simple mechanical action, providing a dependable ignition source without the need for matches, disposable gas lighters or batteries. Supplied with 5 replacement flints, the GTEC lighter offers excellent convenience for professional welders, fabricators, engineers and maintenance personnel who regularly work with oxy-acetylene and oxy-propane equipment. Its straightforward design makes it an essential workshop accessory for lighting gas torches used in welding, brazing, heating and metal cutting operations. Compact, easy to operate and suitable for everyday workshop use, the GTEC Single Flint Lighter is a useful addition to any professional welding or gas cutting equipment setup. Key Features Genuine GTEC Single Flint Lighter Supplied with 5 flints Traditional mechanical spark ignition Designed for lighting compatible oxy-fuel gas torches Suitable for oxy-acetylene welding and cutting equipment Suitable for compatible oxy-propane torches No batteries or lighter fuel required Simple and convenient handheld operation Replaceable flint design Ideal for professional welding and fabrication workshops Suitable for engineering and maintenance applications Compact and practical workshop accessory Typical Applications Ideal for: Oxy-acetylene welding torches Oxy-fuel cutting torches Gas brazing equipment Gas heating torches Oxy-propane cutting equipment Welding and fabrication workshops Engineering and maintenance Automotive repair workshops Industrial metalworking General gas torch ignition Technical Specification Brand: GTECProduct Type: Single Flint Spark LighterIgnition Type: Mechanical Flint StrikerFlint Configuration: Single FlintFlints Supplied: 5Fuel Required: NoBattery Required: NoApplication: Oxy-Fuel Welding, Cutting, Brazing & Heating Torch IgnitionReplacement Flints: Yes Reliable Ignition for Oxy-Fuel Equipment A flint spark lighter is a commonly used accessory for lighting oxy-fuel welding and cutting torches. Unlike conventional disposable lighters, the GTEC Single Flint Lighter produces sparks mechanically, removing the need for a separate fuel source or batteries. This makes it a convenient ignition tool for welding and fabrication environments where gas torches are used regularly. Supplied with 5 Flints The GTEC Single Flint Lighter is supplied with five flints, providing convenient replacements when the existing flint becomes worn. The replaceable flint design allows the lighter to remain in service without replacing the complete tool each time the flint wears out. Why Choose the GTEC Single Flint Lighter? The GTEC Single Flint Lighter with 5 Flints is a practical workshop accessory for professional welders, fabricators and engineers who require a simple, dependable method of igniting compatible gas torches. Its traditional spark striker design, replaceable flints and convenient handheld operation make it ideal for everyday oxy-acetylene welding, gas cutting, brazing and heating applications. Please Note: Use only with suitable gas torch equipment and follow the torch manufacturer's ignition procedures. Ensure gas connections are secure and leak-free before operation. Keep hands and the lighter clear of the torch nozzle during ignition. This product is a spark igniter only and does not include a gas torch or gas supply.

G-Tech Gas Equipment Gtec MIG Tip Nozzle Cleaner In Metal Case

Gtec MIG Tip Cleaner in Metal Case Essential Maintenance Tool for Prolonged MIG Torch Life and Consistent Weld Quality The Gtec MIG Tip Cleaner is a compact, reliable tool designed for cleaning and maintaining MIG welding contact tips. Housed in a durable metal case, this cleaner ensures your MIG tips remain free from spatter build-up, oxidation, and debris—improving electrical conductivity and ensuring stable arc performance. The rugged metal case keeps the reamers neatly stored and protected, while also doubling as a convenient handle for improved grip during cleaning. This is an essential tool for any welder looking to extend tip life, reduce downtime, and maintain optimal MIG torch performance. Key Features: Improves Arc Stability: Ensures smooth wire feed and consistent electrical contact Durable Metal Storage Case: Protects tools and provides a stable grip during use Compact and Portable: Fits easily into a toolbox or welding station drawer Extends Tip Life: Reduces spatter-related damage and helps maintain tip shape Easy to Use: Simple manual operation—no power or complex setup required Applications: MIG welding tip maintenance Cleaning contact tips in industrial, automotive, or fabrication settings Suitable for steel, stainless, and aluminum welding operations Typical Users: Professional welders Maintenance engineers Fabricators Workshop technicians   The Gtec MIG Tip Cleaner in Metal Case is a must-have addition to any welder’s toolkit—keeping your equipment in top condition and ensuring every weld starts clean and finishes strong.

G-Tech Gas Equipment Spindle Key

Starparts G Tech Spindle Key The Spindle key (cylinder key) is designed for the easy opening and closure of cylinder valves.To open a cylinder valve, simply rotate the spindle anti-clockwise using this spindle key. Turn clockwise to securely close the cylinder. Easy and safe opening and closure of cylinders  Fits square valve cylinders

G-Tech Gas Equipment Gtech Type 5 Gas Welding & Cutting Set In Carry Case

Starparts G-Tech Type 5 Welding & Cutting Set Versatile, Professional-Grade Oxy/Acetylene Kit for Welding, Cutting & Heating Operations The Starparts G-Tech Type 5 Welding & Cutting Set is a complete, heavy-duty gas welding and cutting kit designed for the demanding needs of modern fabrication, engineering, and maintenance environments. Engineered with durability, flexibility, and safety in mind, this set features Type 5 connections, allowing quick adaptation between welding, cutting, and heating tasks using the same ergonomic handle and mixer system. At the core of the kit is the Type 5 shank, a robust handle compatible with the included cutting attachment, welding mixer, and swaged welding nozzles. Combined with high-quality twin-gauge G-Tech regulators for precise gas control, 5m fitted hoses, flashback arrestors, and a full accessory set, this kit delivers everything needed for a wide range of oxy/acetylene gas processes. Neatly packaged in a stainless steel tool case, the set is portable, protective, and easy to transport—ideal for mobile welders, fabrication shops, and on-site maintenance teams. Kit Contents:

G-Tech Gas Equipment Gtech Oxy/Propane 18/90 Cutting Set In Carry Case

Starparts G-Tech Oxy/Propane 18/90 Cutting Set Complete, Heavy-Duty Gas Cutting Kit with Stainless Steel Tool Case The Starparts G-Tech Oxy/Propane 18/90 Cutting Set is a premium, all-in-one gas cutting solution designed for professional metalworkers, fabricators, and site engineers. Housed in a durable stainless steel tool case, this complete kit is ready for immediate use with everything required for oxy/propane flame cutting operations—ideal for cutting ferrous metals with precision, safety, and efficiency. At the heart of the set is the trusted NM 18/90 cutting torch, known for its robust design, high flow rate, and reliable performance. Paired with single-stage, high-quality G-Tech regulators for both oxygen (300 bar) and propane (25 bar), the system ensures consistent and safe gas delivery under demanding conditions. This comprehensive kit also includes oxygen and fuel flashback arrestors, pre-fitted 10m hoses with 3/8" check valves, and two PNM cutting nozzles for different material thicknesses. A flint lighter and combination spanner add convenience, making the kit truly ready for action on arrival. Kit Contents:

G-Tech Gas Equipment Gtech Oxy/Acetylene 18/90 Cutting Set In Carry Case

Starparts G-Tech Oxy/Acetylene 18/90 Cutting Set Complete Industrial-Grade Flame Cutting Kit with Stainless Steel Tool Case The Starparts G-Tech Oxy/Acetylene 18/90 Cutting Set is a fully equipped, high-performance gas cutting solution designed for industrial fabricators, engineers, and mobile welders. Built to handle demanding cutting tasks with speed and precision, this all-in-one kit provides everything required for professional oxy/acetylene cutting—neatly packed in a rugged stainless steel tool case. At the core of the set is the dependable NM 18/90 cutting torch, a proven industry standard renowned for its balanced design, powerful flame profile, and durability in tough environments. The kit includes G-Tech single-stage oxygen and acetylene regulators, delivering stable pressure control up to 300 bar (oxygen) and 25 bar (acetylene), ideal for precise flame adjustment. Also included are in-line flashback arrestors, 10m fitted hoses, and two ANM cutting nozzles to cover a range of material thicknesses. A flint lighter and combination spanner round out the kit, offering true "ready-to-go" functionality. Kit Contents:

G-Tech Gas Equipment Gtech Oxygen Re-Settable Flashback Arrestor Regulator Mounted

Starparts GTech Flashback Arrestor Resettable Oxygen Conforms to EN 730-1, ISO 5175 Stops flashback through flame arrestor (FA) Avoids dangerous gas mixtures by a gas non return valve (NV) A temperature sensitive cut off valve stops the gas flow when a pre-determined temperature is exceeded (TV) Interrupts the further gas flow on pressure shocks by a resettable pressure sensitive cut-off valve (PV) Every safety device is 100% tested A dust filter protects the gas non return valve against contamination  

G-Tech Gas Equipment G-tech Fuel Flashback Arrestor Re-settable Regulator Mounted

Starparts G Tech Flashback Arrestor Resettable Fuel Gas Conforms to EN 730-1, ISO 5175  Stops flashback through flame arrestor (FA)  Avoids dangerous gas mixtures by a gas non return valve (NV)  A temperature sensitive cut off valve stops the gas flow when a pre-determined temperature is exceeded (TV)  Interrupts the further gas flow on pressure shocks by a resettable pressure sensitive cut-off valve (PV)  Every safety device is 100% tested  A dust filter protects the gas non return valve against contamination   

Starparts Argon/Co2 Gas Flow Meter With 3/8" BSP Fittings

Argon/CO₂ Gas Flow Meter – 3/8" BSP Fittings The Argon/CO₂ Gas Flow Meter is a precision instrument designed for accurate monitoring and regulation of shielding gas flow in MIG, TIG, and MAG welding applications. Ideal for both professional and workshop use, it ensures optimal gas coverage, improving weld quality and reducing porosity. Constructed from durable materials, this flow meter features a clear, easy-to-read scale and a stable rotameter for precise flow measurement. With 3/8" BSP fittings, it is compatible with a wide range of standard gas cylinders and welding setups, making it a versatile choice for controlling argon, CO₂, or mixed gases. Key Features: Accurate argon/CO₂ gas flow measurement for MIG/TIG welding Clear rotameter scale for easy reading Durable construction for long-lasting use 3/8" BSP fittings for universal compatibility Improves shielding gas efficiency and weld quality Typical Applications: MIG Welding | TIG Welding | MAG Welding | Workshop Use | Industrial Fabrication Type: Gas Flow Meter Gas Compatibility: Argon, CO₂, and Mixed Gases Fittings: 3/8" BSP Ranges Available: 0-14LPM 0-25LPM 0-40LPM

Harris 6290 VVC Cutting Nozzle

Harris 6290 VVC Cutting Nozzle The Harris 6290 VVC Cutting Nozzle is a high-performance, precision-engineered consumable designed for oxy-fuel cutting applications. Manufactured by Harris, it provides clean, accurate cuts and consistent flame control, making it ideal for professional welders, fabricators, and maintenance technicians. Constructed from durable, heat-resistant materials, the 6290 VVC nozzle ensures long service life even under frequent, high-temperature use. Its robust design delivers reliable performance across a wide range of mild steel and ferrous metal cutting tasks in industrial and workshop environments. Key Features: Precision-engineered Harris cutting nozzle Provides clean, controlled cutting performance Durable, heat-resistant construction for long-lasting use Compatible with standard oxy-fuel cutting equipment Ideal for fabrication, industrial workshops, and maintenance applications Typical Applications: Oxy-Fuel Cutting | Fabrication | Maintenance | Metalworking | Workshop Use Brand: Harris Model: 6290 VVC Type: Cutting Nozzle Features: Minimizes kerf Increases Cutting Speed Reduces Heat Input High Quality Machine Cuts Reduces Afterwork Used with Low-cost Fuel Gases

3 Wheels Tyre Oxygen/Propane Cylinder Trolley

Solid Tyre Single Propane Cylinder Trolley

Solid Tyre Single Propane Cylinder Trolley Propane single cylinder trolley used for the safe transport and handling of size E propane gas bottles. Features include solid tyre wheels, chain and rubber grips. Dimensions: 850 x 340 x 290mm Weight approximately 11kg

Solid Tyre Y-Type Oxygen/Acetylene Cylinder Trolley

Solid tyre Y-type oxygen / acetylene cylinder trolley Key Features:  Designed to take half size bottles Cylinder Types: Oxygen Y and Acetylene J   Trolley Dimensions: 660mm x 470mm x 190mm  

Solid Tyre Heavy Duty Oxygen/Acetylene Midi Flame Pack Cylinder Trolley

Solid tyre heavy duty oxygen/ acetylene midi-flame cylinder trolley

Solid Tyre Oxygen/Acetylene Cylinder Trolley

Solid Tyre Oxygen/Acetylene Cylinder Trolley Twin cylinder oxy/acetylene trolley for transporting industrial gas bottles. Cylinder Types:Oxygen W and Acetylene F G H Trolley Dimensions:850mm x 590mm x 250mm

16" Pneumatic Tyre Oxygen/Acetylene Cylinder Trolley

16” pneumatic tyre oxygen/acetylene cylinder trolley

Solid Tyre Oxygen/Propane Cylinder Trolley

Solid Tyre Oxygen/Propane Cylinder Trolley Oxy/acetylene or oxy/propane twin cylinder trolley with 16″ pneumatic tyres ideally suited for transporting cylinders over rough or uneven ground. Oxy/Acetylene Trolley:Cylinder Types: Oxygen W and Acetylene F G HTrolley Dimensions: 890mm x 590mm x 250mm Oxy/Propane Trolley:Cylinder Types: Oxygen W and Propane ETrolley Dimensions: 850mm x 690mm x 310mm

Weldgas Light Weight Cutting & Welding Kit In Carry Case

Kit includes: • S/S 2g Oxygen regulator • S/S 2g Acetylene regulator • Oxygen FBA • Fuel gas FBA • Lightweight shank • Lightweight cutting attachment • Lightweight mixer • Lightweight swaged nozzles: 1,3,5,10,13 • Nozzle cleaners • Triple flint lighter • AFN 1/32 and 3/64 nozzle • DF combi spanner 28-21mm UK type

Weldgas Type 5 Cutting & Welding Kit In Carry Case

Kit includes: • S/S 2g Oxygen regulator • S/S 2g Acetylene regulator • Oxygen Flashback Arrestor • Fuel gas Flashback Arrestor • Type 5 shank • Type 5 cutting attachment • Type 5 mixer chamber • Type 5 swaged nozzles: 1,3,5,10,13 • Nozzle cleaners • Triple flint lighter • ANMS 3/64 and 1/16 nozzles, • DF combi spanner 28-21mm UK type

3M Speedglas G5-01 VC Auto Darkening Welding Helmet

3M G5-01 VC Speedglas Auto Darkening Welding Helmet  Product Details Variable dark shade 5, 8-14 and variable dark state colors (for shades 8-14). The big, 170 x 104 mm, clear protective visor is curved, with excellent views up, down and peripherally.   Speedglas Natural Colour technology makes the filter view seem lighter, more detailed and colourful.   For more control over your comfort, the innovative G5-01 helmet duct system lets you direct the airflow to either your face, visor or somewhere in-between.   Re-configure your helmet using our many additional accessories to just the right coverage for your head, neck, and shoulders.   The slim profile and ergonomic design makes it even more lightweight and easier to go into tight welding spaces .   The G5-01 ADFs are Bluetooth enabled: with the 3M Connected Equipment app, users get access to additional functionalities, statistics and documentation.   3M™ Speedglas™ Welding Helmet G5-01, with welding filter G5-01VC, 611130 can offer eye, face and respiratory protection with a flip-up welding filter in most welding applications.   Can offer For use with 3M™ Speedglas™ Welding Filter Series G5-01 (sold separately).   To be combined with 3M™ Adflo™ Powered Air Respirator or 3M™ Versaflo™ Supplied Air Regulator System.   Get comfortable, easy to use protection during welding applications with 3M™ Speedglas™ Welding Helmet G5-01 with welding filter G5-01VC, 611130.   To be combined with 3M™ Adflo™ Powered Air Respirator or 3M™ Versaflo™ Supplied Air Regulator System. Our welding helmet has a flip-up front that gives you a large, 170 x 104 mm, clear view that’s excellent for precision grinding in low-light conditions.   Welding filter viewing area 73 x 109 mm. Auto-ON/OFF.   Variable dark shade 5, 8-14 and variable dark state colors (for shades 8-14).

Gas Bottle Cylinder Key

The UK Spec Gas Bottle Cylinder Key is a simple and essential workshop tool designed for opening and closing compatible industrial gas cylinder valves. Ideal for welding, fabrication, engineering and maintenance environments, the cylinder key provides a convenient way to operate compatible gas bottle valves without relying on unsuitable tools. Its compact design makes it easy to keep alongside welding equipment, regulators and gas bottles, ensuring a suitable cylinder key is readily available when changing bottles or shutting down equipment. A useful addition to any professional fabrication shop, welding workshop, mobile welding setup or engineering department using compatible UK industrial gas cylinders. Key Features UK specification gas bottle cylinder key Designed for compatible industrial gas cylinder valves Quick and easy to use Compact and convenient workshop tool Ideal for keeping with welding and gas equipment Suitable for professional and industrial environments Useful for welding, fabrication and maintenance applications Ideal as a replacement or spare cylinder key Typical Applications Ideal for welding workshops, fabrication shops, engineering departments, maintenance teams and mobile welding setups using compatible industrial gas cylinders. Specification Product Type: Gas Bottle / Cylinder KeySpecification: UK SpecApplication: Opening & Closing Compatible Gas Cylinder ValvesSuitable For: Welding, Fabrication, Engineering & Industrial Use Please Note: Gas cylinder valve designs can vary. Always check that the key is compatible with your specific cylinder valve before use. Also Fits Most Regulator Nuts 

Milwaukee M18 Cordless Fuel 18V Air Compressor

Our M18 FUEL™ 2 Gallon Compact Quiet Compressor is designed for the professional carpenter and remodeler. This quiet air compressor is only 68dB(A), making it the quietest cordless compressor on the market and quieter than most corded options. We’ve designed this 2-gallon air compressor to be high performing while reducing the noise professionals deal with on jobsites. Its low profile and stackable design allow our portable air compressor to be easily stored and transported on, around, and back off the jobsite. It has run-time professionals need to stay productive, giving you up to 1,600 18ga brad nails per charge. It is compatible with all MILWAUKEE® M18™ REDLITHIUM™ batteries making it easy to swap packs and keep running to finish your job. Features: The quietest cordless compressor available at only 68dB(A) Compact for easy carrying & less fatigue while transporting Part of the M18™ System, featuring 200+ solutions Specifications Sound Level 68 dB(a) Tank Capacity 2 Gallons Max PSI 135 SCFM 1.2 @ 90 PSI Pump Type Oil Free Regulator Single Turn Length 16.25" Width 18.62" Weight 31.2lbs Height 10.62" Power Source Cordless

EWM Picomig 180 Synergic MIG Welder Package

Product Features No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Multiprocess inverter welding machine in set Easy Synergic one-knob operation and integrated wire feeder Set comprising: Picomig 180 Synergic, MT221G welding torch, flux cored wire spool (FCW 71T Selfshield 2 kg, 0.9 mm dia.), steel wire spool (SW 70S G3 2 kg, 0.8 mm dia.), workpiece lead, gas hose, pressure regulator and flux cored nozzle Welding procedures and functions Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 GMAW standard welding Synergic characteristics for steel, CrNi, aluminium and flux cored wires MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Synergic or manual welding operation Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time Your benefits  Portable, compact Robust casing suitable for construction site use High open circuit voltage for excellent ignition characteristics 4-roll drive Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Earth fault monitoring (PE protection) 3.5 m mains supply lead with 16 A shock-proof plug Tech Specs Operation mode Synergic operation Welding process MIG/MAGTIGMMA Operating modes Non-latched Parameters in display Welding currentWire feed speedPlate thicknessJOB numberError codePolarity display Number of JOBs 35 MMA functions HotstartArcforceAntistick Setting range for welding current 5 A - 180 A Duty cycle 40 °C 180 A / 25%120 A / 60%100 A / 100% Open circuit voltage 80 V Mains voltage 1 x 230 V Tolerances -40 % up to +15 % Mains frequency 50 Hz / 60 Hz Recommended generator power 8 kVA Wire feed speed 1 m/min - 15 m/min39.37 ipm - 590.55 ipm Factory-installed roll equipment 0,8 + 1,0 mm / Stahl Spool diameter D200 Torch connection Eurozentralanschluss Protection classification IP23 EMC class A Dimensions (L x B x H) 559 mm x 276 mm x 340 mm22.008 Zoll x 10.866 Zoll x 13.386 Zoll Weight 16 kg35.28 lbs Standards IEC 60974-1, -5, -10 CL.A

G-Tech Gas Equipment Gtech Argon/CO2 Regulator 2 Stage 2 Gauge 300Bar Bottom Entry

Gtech Argon/CO₂ Regulator – 2 Stage, 2 Gauge, 300 Bar Bottom Entry The Gtech Argon/CO₂ 2 Stage Regulator (2 Gauge, 300 Bar, Bottom Entry) is a premium gas control regulator designed to deliver exceptionally stable pressure and flow for critical MIG/MAG and TIG welding applications. Its two-stage design provides superior performance by reducing cylinder pressure in two steps, ensuring a constant outlet pressure even as the cylinder pressure drops—perfect for precision welding and long-duration jobs. Built from high-quality brass for strength and corrosion resistance, this regulator features a bottom-entry configuration, making it ideal for use with 300 Bar cylinders in tight or vertical setups. The dual gauges offer clear, at-a-glance readings of cylinder pressure and working/flow pressure, giving welders precise control over shielding gas delivery. Key Features: Two-stage regulation – delivers consistent outlet pressure throughout the cylinder’s life. Dual gauge display – easy monitoring of both cylinder pressure and outlet/flow pressure. Rated for 300 Bar cylinders – suitable for high-pressure Argon and Argon/CO₂ mixes. Bottom-entry design – ideal for vertical cylinder setups or confined spaces. Precision-machined brass construction – excellent durability and corrosion resistance. Fine adjustment control – ensures accurate gas flow for optimum weld quality and gas economy. Safety relief valve – protects against over-pressurisation.   Perfect for fabrication shops, industrial welding, and high-pressure applications, the Gtech Argon/CO₂ Regulator – 2 Stage, 2 Gauge, 300 Bar Bottom Entry provides the reliability and accuracy professionals demand for critical welding operations.

G-Tech Gas Equipment Gtech Oxygen Regulator 2 Stage 2 Gauge

Gtec Bottom Entry Two Stage 2 Gauge Oxygen Regulator 300 Bar Two-Gauge Bottom Entry Oxygen Regulator. Designed for professional use, this robust and reliable regulator ensures optimal performance for welding, cutting, and other oxygen-based applications. Key Features: Two-Stage Regulation: Delivers consistent output pressure, even as cylinder pressure drops, ensuring a stable flow for precision tasks. Dual Gauges: Clear, easy-to-read gauges display both cylinder pressure and output pressure, providing full control and monitoring at a glance. Bottom Entry Design: Compact and ergonomic configuration for streamlined cylinder attachment and enhanced workspace efficiency. Durable Construction: Engineered with high-quality materials for long-lasting performance, even in demanding environments. Safety Focused: Built-in safety features meet industry standards for peace of mind during use. Whether you're a seasoned professional or an occasional user, the GTech Two-Stage Oxygen Regulator is a dependable addition to your toolkit, delivering efficiency and reliability every time.

G-Tech Gas Equipment Gtech Acetylene Regulator 2 Stage 2 Gauge

Gtec Bottom Entry Two Stage 2 Gauge Acetylene Regulator 25 Bar

G-Tech Gas Equipment Gtech Oxygen Regulator Single Stage 2 Gauge 300 Bar Side Entry

Gtec Single Stage 2 Gauge Oxygen Regulator 300 Bar Side Entry The G-Tech Single Stage Oxygen Regulator is designed for precise and reliable gas control in welding, cutting, and industrial applications. Built for durability and performance, this regulator features a side-entry design, making it ideal for setups where space and orientation are key factors. Key Features: Single-Stage Design – Ensures a steady and controlled oxygen flow for optimal performance. Dual Gauge Display – Provides clear readings of both cylinder pressure and outlet pressure for easy monitoring. 300 Bar Pressure Capacity – Suitable for high-pressure oxygen cylinders, delivering efficiency and reliability. Side Entry Connection – Designed for compatibility with various cylinder configurations. Robust & Durable Build – Manufactured with high-quality materials for long-lasting performance. Safety Compliant – Meets industry safety standards for secure and efficient gas regulation.   Ideal for professional welders, fabricators, and industrial users, the G-Tech Oxygen Regulator ensures precise pressure control and maximum safety, making it a trusted choice for all oxy-fuel applications.

G-Tech Gas Equipment Gtech Oxygen Regulator Single Stage 2 Gauge 300 Bar

Gtech Oxygen Regulator – Single Stage, 2 Gauge, 300 Bar The Gtech Oxygen Regulator is a high-quality, single-stage regulator designed for precise control of oxygen flow in welding, cutting, and industrial applications. Built for reliability and safety, it ensures consistent pressure delivery up to 300 Bar, making it ideal for both workshop and professional use. Featuring dual gauges for inlet and outlet pressure monitoring, this regulator allows accurate adjustment and control of oxygen flow. Its durable construction provides long-lasting performance and safe operation under demanding conditions, ensuring optimal efficiency for all oxy-fuel equipment. Key Features: Single-stage oxygen gas regulator Maximum pressure: 300 Bar Dual gauges for inlet and outlet pressure monitoring Durable construction for long-lasting use Ensures consistent and precise oxygen flow for welding and cutting Typical Applications: Oxy-Fuel Welding | Oxy-Acetylene Cutting | Industrial Fabrication | Workshop Use   Key Features • 50mm gauges conforming to ISO 5171 • Forged brass body & bonnet • Colour coded knobs for ease of use & clear identification of gas type • 300 bar capacity • Conform to ISO 2503 Brand: Gtech Type: Oxygen Regulator Model: Single Stage, 2 Gauge, 300 Bar

G-Tech Gas Equipment Gtech Argon Regulator Single Stage 2 Gauge With Nevoc Fitting

Single Stage 2 Gauge Argon Regulator with NEVOC Female threaded Connection For Energas 300Bar Bottles 

G-Tech Gas Equipment Gtech Argon/CO2 Regulator Single Stage 2 Gauge

Gtech Argon/CO₂ Regulator – Single Stage, 2 Gauge The Gtech Argon/CO₂ Regulator (Single Stage, 2 Gauge) is a high-quality gas control regulator designed for MIG, TIG, and general welding applications. Built for precision and reliability, this regulator ensures accurate gas flow and stable pressure, delivering clean, consistent shielding for superior weld quality. The two-gauge design provides clear, easy-to-read information: one gauge monitors cylinder pressure, while the second displays working/flow pressure, allowing precise adjustment for a variety of welding processes. Its single-stage construction ensures smooth and consistent output, even as cylinder pressure drops, making it ideal for professional and workshop use. Key Features: Single-stage regulator – delivers stable and consistent outlet pressure. Dual gauge design – monitors both cylinder pressure and outlet/flow pressure at a glance. Compatible with Argon, Argon/CO₂ mixes, and pure CO₂ – perfect for MIG/MAG and TIG welding. Precision brass body – durable, corrosion-resistant construction for long service life. Easy adjustment control – fine-tune gas flow for optimum weld quality and gas economy. Safety relief valve – protects against over-pressurisation.   Designed for reliability and ease of use, the Gtech Argon/CO₂ Regulator Single Stage 2 Gauge is the ideal choice for professional welders, fabrication shops, and maintenance teams requiring accurate gas control and consistent welding performance.

G-Tech Gas Equipment Gtech Acetylene Regulator Single Stage 2 Gauge

Single Stage 2 Gauge Acetylene Regulator 25 Bar Side Entry

G-Tech Gas Equipment G-tech Acetylene Regulator Single Stage 2 Gauge

Achieve precise gas control with the G-Tech Acetylene Regulator, designed for reliable performance in welding, cutting, and heating applications. This single-stage regulator ensures a steady and controlled gas flow, while the bottom entry design allows for easy connection in various setups. 25 Bar rated Key Features: Single-Stage Regulation – Provides consistent pressure control for smooth operation.Dual Gauge Display – Clearly indicates both cylinder pressure and working pressure for easy monitoring.Bottom Entry Design – Ideal for setups where space and hose routing require a bottom-mounted connection.High-Quality Construction – Built for durability and safety in demanding workshop environments.Compatible with Acetylene Gas – Suitable for a wide range of oxy-fuel welding and cutting applications.Safety Compliant – Meets industry standards for secure and efficient gas regulation. Whether you're a professional fabricator or a workshop operator, the G-Tech Acetylene Regulator delivers the precision and reliability you need for high-quality results.

Jasic Cut 160 Plasma Inverter Package

Jasic Plasma Cut 160 Inverter The Jasic Plasma Cut 160 Inverter is a high-performance, professional plasma cutting machine designed to deliver smooth, precise, and reliable results on even the most demanding cutting tasks. Built using the latest IGBT inverter technology, it provides excellent cutting stability, efficiency, and long-term reliability, making it an ideal choice for industrial fabrication, maintenance, and production environments. With variable cutting control, operators can fine-tune performance to suit the material and application, achieving consistently clean, accurate cuts with minimal dross. The Plasma Cut 160 delivers an impressive clean-cut capacity of up to 45mm and severance cuts of up to 50mm, ensuring it can handle thick materials with ease. High-frequency arc ignition ensures fast, reliable starts, while the clear LED display and intuitive controls make the machine easy to operate. Designed with practicality in mind, the unit is supplied trolley-mounted for easy manoeuvrability, allowing it to move effortlessly around the workshop or job site. An in-built pressure regulator ensures consistent airflow at all times, helping maintain consistent cut quality and prolong consumable life. For automated cutting applications, the machine is CNC-ready when fitted with the appropriate interface and also generator-friendly when used with regulated-output generators. Reliable, powerful, and easy to use, the Jasic Plasma Cut 160 Inverter is a versatile cutting solution for professionals who demand precision, performance, and durability. Why we love this Plasma Cutting Inverter: IGBT powerful components Trolley mounted for easy manoeuvring Variable control for cutting  High-frequency ignition LED display Smooth and precise cutting  Simple to use In-built pressure regulator Automated cutting can be done- requires the CNC interface Generator-friendly- with generators which have a regulated output. 45mm clean cut capacity 50mm severance capacity  What is included in the Jasic Plasma Cut 160 package: Inverter power source Wheel-mounted Plasma torch Earth return lead Operating instructions 5-year extended warranty

Jasic JM272S Separate Wire Feed Inverter MIG Welder Package - Gas-Cooled

Jasic MIG 272 Separate Inverter Welder - Gas-Cooled The Jasic MIG 272S Separate Inverter Welder represents the pinnacle of welding technology, offering a powerful, versatile solution for professionals seeking superior welding performance. Part of the esteemed Jasic 270 series, this machine is distinguished by its advanced IGBT welding components, which are designed to handle demanding, repetitive welding cycles with unparalleled reliability and efficiency. At the heart of the Jasic MIG 272S is state-of-the-art control circuitry complemented by a digital A/V display. This feature allows welders to precisely monitor and adjust welding parameters, ensuring optimal control of the welding process and enabling superior weld quality and consistency. This modular package boasts excellent welding performance and an impressive 270A duty cycle at 30%, running on a single-phase 230V input. This high-duty cycle increases productivity, enabling longer welding periods with less downtime. It is ideal for workshops, fabrication sites, and industrial applications where efficiency and reliability are paramount. The Jasic MIG 272S's versatility is evident in its ability to work with a wide range of wire sizes and types. It can smoothly handle solid steel wires up to 7.9mm, stainless steel solid wires up to 9.5mm, and aluminium solid wires up to 9.5mm. Furthermore, it can use flux-cored steel wire up to 6.4mm, offering a comprehensive range of welding solutions for different materials and thicknesses. This comprehensive package includes the MIG inverter machine power source, a robust 4-roll wire feed unit for consistent wire feeding, a 5-metre interconnecting cable for flexibility in setup, a high-quality MIG welding torch, a work return lead and clamp, and a gas hose with regulator for complete setup out of the box. The Jasic MIG 272S Separate Inverter Welder embodies advanced welding technology, offering unmatched performance, versatility, and reliability. Whether for industrial fabrication, automotive repairs, or construction projects, this machine is engineered to meet the highest professional welding standards. Why we love the Jasic 270S machine: High-performance machine Advanced control circuitry Digital interface amps and voltage  High duty cycle- increased productivity Suitable for wire sizes- 0.6/0.8/1.0mm  Stable and reliable arc Burn back control Spool gun interface Compact machine  Wire inching feature What is included in this package? MIG inverter machine power source 4-roll wire feed unit 5 metre interconnecting cable MIG welding torch Work return lead and clamp Gas hose and regulator.   

Jasic JT500D Pulse AC/DC Water-Cooled TIG Welder Package

Jasic TIG 500 Pulse AC/DC Water-Cooled Package The JASIC TIG 500 Pulse AC/DC Water-Cooled Welder is a high-performance, three-phase inverter power source engineered for medium- to large-scale production environments where precision, control, and reliability are essential. Designed with professional TIG welders in mind, the intuitive digital control panel provides complete command over every welding parameter, allowing operators to fine-tune settings with ease. Advanced AC/DC pulse functionality delivers outstanding arc stability and weld quality across a wide range of materials, making the TIG 500 equally capable of handling aluminium and aluminium alloys in AC mode, as well as carbon steel, stainless steel, copper and other non-ferrous metals in DC TIG mode. Comprehensive pulse control options—including pulse frequency, duty cycle, arc force and cleaning width—enable exceptional control over heat input, penetration and bead appearance. Features such as adjustable pre- and post-flow gas control, up-slope and down-slope settings, and program memory storage ensure repeatable, high-quality results on even the most demanding jobs. The water-cooled design is complemented by intelligent fan-on and cooler-on-demand technology (2023 models), improving performance and energy-saving options. With a smooth, stable arc and remote control interface for added flexibility, the JASIC TIG 500 Pulse AC/DC is a dependable choice for professionals who demand uncompromising performance in production TIG welding applications. Key Features: TIG Pulse AC/DC with digital control Program memory storage Easy to use, intuitive control panel Pre-post flow time, up/down slope Pulse adjustment Pulse frequency, pulse duty, arc force, clean width Remote control interface AC function for aluminium and aluminium alloys DC TIG function for carbon steel, stainless steel and non-ferrous metals Smooth arc and stable welding performance Water cooled Fan-on and Cooler-on demand (2023 models) What is included in this water-cooled package: Inverter power source Water cooler Trolley TIG torch and adaptor Gas regulator Earth return lead Operating Instructions  

Jasic TIG 400P DC Water-Cooled TIG Welder Package 415V 3Phase

Jasic TIG 400P Pulse Inverter (Water-cooled) Package: Take control of demanding welding tasks with the TIG 400 Pulse, a high-performance machine built for both DC TIG and DC MMA applications. Featuring a modern, intuitive control panel and a modular design, it comes supplied with a trolley and water cooler to support efficient, uninterrupted working on even the toughest jobs. Powered by advanced IGBT inverter technology running at 40kHz, the TIG 400 Pulse delivers excellent efficiency and outstanding current stability, producing clean, consistent welds with professional-quality results. 2T/4T trigger modes reduce operator fatigue, while adjustable upslope, downslope, and pre- and post-gas flow settings allow fine-tuned control for smooth, repeatable welds. Designed to perform reliably in challenging conditions, the machine includes automatic mains voltage compensation, AVR generator compatibility, and hot start and arc force control for dependable arc ignition and stable MMA welding. With eight programmable memory channels and advanced DC TIG pulse functionality, complex welding operations become simpler and more precise. A durable, high-quality tactile finish, front-mounted remote control connections, and intelligent fan-on-demand and water cooling systems ensure long-term reliability and performance. Supported by a comprehensive 5-year warranty, the TIG 400 Pulse delivers the versatility, precision, and build quality professionals can rely on—day after day. Key Features: Industrial-grade IGBT Inverter technology DC pulse TIG and MMA machine with VRD functionality The MCU chip improves the accuracy and consistency.  High-frequency or lift-arc ignition, 2T and 4T, and spot-time features are included. Digital, user-friendly interface Up and down slope, pre- and post-flow, crater/initial/weld current. Gas test function in the DC TIG mode Modular design with everything included (trolley and water cooler).  8-channel storage, which is automatic On-demand fan for cooling as well as water cooling Generator (regulated output) friendly. The foot pedal is optional. What is included in this package: Inverter power source Trolley  Water Cooler TIG torch and adaptor Gas regulator  Earth return lead  

Parweld PNME Gas Cutting Nozzle

PNM Cutting Nozzle   Parweld offers a wide range of gas cutting and welding equipment including regulators, torches and accessories for a variety of applications. Safety is always the focus, and all of our products are extensively tested and manufactured to the highest standards. • General Purpose Hand Cutting Propane Nozzle.• Longer than Standard PNM Nozzles to Give Improved Backfire Resistance and Accessibility.• Used with a Type 5 Cutting / Welding and Heating Torch.

Starparts Propane PNM Gas Cutting Nozzle

Starparts Propane PNM Gas Cutting Nozzle The Starparts Propane PNM Gas Cutting Nozzle is a precision-engineered consumable designed for reliable and efficient propane-based oxy-fuel cutting. Constructed from high-quality, heat-resistant materials, this nozzle ensures consistent flame performance, accurate cuts, and long service life, making it ideal for professional welders, fabricators, and maintenance technicians. Compatible with standard propane oxy-fuel cutting equipment, the PNM nozzle delivers clean, controlled cuts on mild steel and other ferrous metals. Its robust construction withstands high temperatures and frequent use, providing dependable performance in both workshop and industrial environments. Key Features: Precision-engineered Starparts cutting nozzle for propane Provides clean, controlled cutting performance Durable, heat-resistant construction for long-lasting use Compatible with standard propane oxy-fuel cutting equipment Ideal for fabrication, maintenance, and industrial workshops Typical Applications: Propane Oxy-Fuel Cutting | Fabrication | Maintenance | Metalworking | Workshop Use Brand: Starparts Type: Propane Gas Cutting Nozzle Model: PNM

Parweld ANME Cutting Nozzle

ANME Cutting Nozzle Parweld offers a wide range of gas cutting and welding equipment including regulators, torches and accessories for a variety of applications. Safety is always the focus, and all of our products are extensively tested and manufactured to the highest standards. • General Purpose Hand Cutting Acetylene Nozzle • Promotes Improved Economy of Gases. • Used with a Type 5 18/90 Cutting / Welding and Heating Torch. Longer than standard ANM nozzles to give improved backfire resistance and accessibility 

Starparts Acetylene ANM Gas Cutting Nozzle

Starparts Gas Acetylene ANM Cutting Nozzle The Starparts Gas Acetylene ANM Cutting Nozzle is a durable, precision-engineered consumable designed for efficient and accurate oxy-acetylene cutting. Manufactured from high-quality materials, it ensures consistent flame performance and long service life, making it ideal for professional fabricators, welders, and maintenance technicians. Compatible with standard oxy-acetylene cutting equipment, this nozzle delivers clean, controlled cuts on mild steel and other ferrous metals. Its robust design withstands high temperatures and frequent use, providing reliable performance in industrial and workshop settings. Key Features: Precision-engineered Starparts cutting nozzle Compatible with acetylene gas and standard oxy-fuel cutting equipment Provides clean, controlled cutting performance Durable construction for long service life Suitable for industrial, workshop, and maintenance applications Material Thickness Gutting Guide Nozzle Selection:   1/32" 0.8mm 3–6mm 3/64" 1.2mm 5–12mm 1/16" 1.6mm 10–75mm 5/64" 2.0mm 70–100mm 3/32" 2.4mm 90–150mm 7/64" 2.8mm 140–200mm 1/8" 3.2mm 190–300mm Typical Applications: Oxy-Acetylene Cutting | Fabrication | Maintenance | Workshop Use | Metalworking   Brand: Starparts Type: Gas Acetylene Cutting Nozzle Model: ANM

Weldgas Single Stage 2 Gauge Argon/Co2 Bottom Entry Regulator

Weldgas Argon/Co2 single stage 2 gauge regulator 10Bar bottom entry  Comes with male thread fitting to go into the bottle standard for BOC, SGS, hobbyweld type Gas bottles etc  Used for MIG & TIG welding gas Spec: Description - Single stage 2 gauge argon/Co2 0-35L/min base entry Inlet Connection - BS341 No.3 (G5/8 BSP right hand) Outlet Connection - G3/8 BSP right hand Part No. 

EWM Picomig 180A 230V Pulse MIG Welder Package

Product Features Multiprocess inverter welding machine and pulse set Easy Synergic one-knob operation and integrated wire feeder MIG, TIG & MMA MIG Pulse Welding Synergic & Manual Operation 4 Roll Wire Feed Drive Inverter based machine DC Current Gas-cooled Robust plastic casing with no corners or edges Polarity selection and display - Perfect for welding with flux cored wire 3.5M mains supply lead with 16A shock proof plug Overvoltage protection - No damage to machine caused if inadvertently connected to 400V mains voltage Included In This Price: Picomig 180 puls, MT221G welding torch, flux cored wire spool (FCW 71T Selfshield 2 kg, 0.9 mm dia.), steel wire spool (SW 70S G3 2 kg, 0.8 mm dia.), workpiece lead, gas hose, pressure regulator and flux cored nozzle Welding procedures and functions GMAW pulsed welding and GMAW standard welding Synergic characteristics for steel, CrNi and aluminium MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Synergic or manual welding operation Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time Your benefits Portable, compact Saves power through highly efficient performance Robust casing suitable for construction site use Easy, tool-free change of welding polarity IP23 spray water protected Wire spool diameter up to 200 mm/D200 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage Tech Specs Setting range for welding current 5 A - 180 A Duty cycle 40 °C 180 A / 25%120 A / 60%100 A / 100% Open circuit voltage 80 V Mains voltage 1 x 230 V Tolerances -40 % up to +15 % Mains frequency 50 Hz / 60 Hz Recommended generator power 8 kVA Wire feed speed 1 m/min - 15 m/min39.37 ipm - 590.55 ipm Factory-installed roll equipment 0,8 + 1,0 mm / Stahl Spool diameter D200 Torch connection Eurozentralanschluss Protection classification IP23    EMC class A Dimensions (L x B x H) 559 mm x 276 mm x 340 mm22.008 Zoll x 10.866 Zoll x 13.386 Zoll Weight 16 kg35.28 lbs Standards IEC 60974-1, -5, -10 CL.A