EWM Picomig 220 Synergic TKG 230V MIG Welder Ready To Weld Package

EWM Picomig 220 Synergic TKG 230V MIG Welder Package Multiprocess MIG/MAG welding machine, compact, portable, Euro torch connector, with PFC module, for 5 kg D200 spools High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology Welding procedures and functions GMAW standard welding Characteristics for steel, CrNi, CuSi, aluminium and flux cored wires MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time Your benefits Portable, compact No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Robust casing suitable for construction site use High open circuit voltage for excellent ignition characteristics 4-roll drive Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Insulated wire space 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

EWM Phoenix XQ350 Compact Water-Cooled MIG Welder With Expert Panel

Phoenix XQ350 Compact Water-Cooled MIG Welder With Expert Panel MIG/MAG inverter welding machine, with Expert 2.0 technology, pulse and separate wire feeder. This EWM welder is a decompact, demodular- all round welder with all the characteristics expected of a professional welding machine, included in this package is main machine, drive xq wire feeder, drive XQ HP, wire spool adapter, MIG/MAG welding torch (Water cooled, 4m), Workpiece lead with clamp (70mm^2) Gas hose (2M), pressure regulator, coolant and mains plug. Why we love the EWM Phoenix XQ350 Puls CW EX: MIG/MAG inverter welding machine including Expert XQ 2.0 control, pulse, with separate wire feeder Supplied with: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling and 5 m mains connection lead. Ideal for perfect MIG/MAG weld seams even with long welding leads. Seamless synergic control with one-knob operation. No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works. Has innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld for aluminium. Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium. Fully manual operation for Non Synergic operation where requiried. Suitable for MIG/MAG, MMA welding, TIG welding and gouging. Individually configurable programmes for each welding task (JOB). Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires. Start and end-crater function fully adjustable. Infinitely adjustable arc dynamics (choke effect). Accessories and optional extras fit the flexFit casing system: Parts available to purchase and then fixed to the welding machine using conventional slot nuts. LED information bar: Indicates the current operating status. High efficiency and standby function. Connection capability for remote control and function torch. Easy, tool-free change of welding polarity. Earth fault monitoring (PE protection). IP23 spray water protected. Network connectivity with the ewm Xnet software via an integrated or external gateway is optional. PC interface for PC300 XQ software. The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables. Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355. The price shown includes the following components:   Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Phoenix-XQ350-PULS-DW-EX

EWM Phoenix XQ350 Puls DW EX:  MIG/MAG inverter welding machine, with Expert 2.0 technology, pulse and separate wire feeder. This EWM welder is a decompact, demodular- all round welder with all the characteristics expected of a professional welding machine, included in this package is main machine, drive xq wire feeder, drive XQ HP, wire spool adapter, MIG/MAG welding torch (Water cooled, 4m), Workpiece lead with clamp (70mm^2) Gas hose (2M), pressure regulator, coolant and mains plug.  Why we love the EWM Phoenix XQ350 Puls DW EX: MIG/MAG inverter welding machine including Expert XQ 2.0 control, pulse, with separate wire feeder Supplied with: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling, 8-pole interface for scanner + scanner holder, and 5 m mains connection lead Ideal for perfect MIG/MAG weld seams even with long welding leads Seamless synergic control with one-knob operation No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery.  Has innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld for aluminium Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium Fully manual operation for Non Synergic operation where required Suitable for MIG/MAG, MMA welding, TIG welding and gouging Individually configurable programmes for each welding task (JOB) Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires Start and end-crater function fully adjustable Infinitely adjustable arc dynamics (choke effect) Accessories and optional extras fit the flexFit casing system: Parts available to purchase and then fixed to the welding machine using conventional slot nuts LED information bar: Indicates the current operating status High efficiency and standby function Connection capability for remote control and function torch Easy, tool-free change of welding polarity Earth fault monitoring (PE protection) IP23 spray water protected Network connectivity with the ewm Xnet software via an integrated or external gateway is optional PC interface for PC300 XQ software The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S35

EWM Phoenix XQ400 PULS Seperate Water-Cooled MIG Welder 415V

Phoenix XQ400 PULS Seperate Water-Cooled MIG Welder 415V MIG/MAG inverter welding machine, pulse and separate wire feeder. This EWM welder is a decompact, demodular- all round welder with all the characteristics expected of a professional welding machine, included in this package is main machine, drive xq wire feeder, drive XQ HP, wire spool adapter, MIG/MAG welding torch (Water cooled, 4m), Workpiece lead with clamp (70mm^2) Gas hose (2M), pressure regulator, coolant and mains plug. This machine is not capable of Expert 2.0 technology, it does not have controls on the machine but it is controlled exclusively through the wire feeder selected.  Why we love the EWM Phoenix XQ600 Puls DW: MIG/MAG inverter welding machine including Expert XQ 2.0 control, pulse, with separate wire feeder Supplied with: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, water cooling and 5 m mains connection lead Ideal for perfect MIG/MAG weld seams even with long welding leads Seamless synergic control with one-knob operation No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Has innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld for aluminium Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium Fully manual operation for Non Synergic operation where requiried Suitable for MIG/MAG, MMA welding, TIG welding and gouging Individually configurable programmes for each welding task (JOB) Powerful, high-precision EWM eFeed 4-roll wire feeder to reliably feed all solid and flux cored wires Start and end-crater function fully adjustable Infinitely adjustable arc dynamics (choke effect) Accessories and optional extras fit the flexFit casing system: Parts available to purchase and then fixed to the welding machine using conventional slot nuts LED information bar: Indicates the current operating status High efficiency and standby function Connection capability for remote control and function torch Easy, tool-free change of welding polarity Earth fault monitoring (PE protection) IP23 spray water protected Network connectivity with the ewm Xnet software via an integrated or external gateway is optional PC interface for PC300 XQ software The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 The price shown includes the following components:   Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Titan XQ400 Puls Expert Panel Seperate Digital Water-Cooled MIG Welder 415V

Titan XQ400 Puls Seperate Digital Water-Cooled MIG Welder 415V MIG/MAG inverter welding machine with expert XQ 2.0 Control, Pulse and separate wire feeder. This EWM welder is a decompact, all round welder with all the characteristics expected of a professional welder, included in this package is: Drive XQ wire feeder with Drive XQ HP, pivot support for wire feeder, water cooled, 14 pol 1.8m intermediate hose package, wire spool adaptor, MIG torch with OLED screen which is water cooled, has X technology and is 4m in length, workpiece clamp, pressure regulator, coolant and mains plug. Why we love the EWM Titan XQ400 Puls DW EX MIG/MAG inverter welding machine includes Expert XQ 2.0 Control, pulse and separate wire feeder. Equipment Provided: Welding machine with Expert XQ 2.0 Control, including wheel kit with single cylinder bracket, water cooling and 5m mains connection lead Perfect MIG/MAG weld seams even with long welding leads Synergic control with one-knob operation No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Innovative EWM Synergic characteristics rootArc® XQ/rootArc® puls XQ, coldArc® XQ/coldArc® puls XQ, forceArc® XQ/forceArc® puls XQ, wiredArc XQ/wiredArc puls XQ, pulse/superPuls and Positionweld Has Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/aluminium Manual setting of welding parameters is available using Non-Synergic operation. Suitable for MIG/MAG, MMA welding, TIG welding and gouging Individually configurable programmes for each welding task (JOB) Start and end-crater functions adjustable Forever adjustable arc dynamics (choke effect) Accessories and optional extras fit with flexFit casing system: Using conventional slot nuts LED information bar: Indicates the current operating status Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires High efficiency and standby function available Connection capability for remote control and function torch No tools needed for change of welding polarity Monitoring of Earth fault available (PE protection) IP23 spray water protected Optional network connectivity with the ewm Xnet software via an integrated or external gateway PC interface for PC300 XQ software The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumables Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 The price shown includes the following components:   Titan XQ 400 puls decompact, including all characteristics and welding processes Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,

EWM Titan XQ 350 Pulse Seperate Watercooled MIG Welder With Expert Panel

EWM Titan XQ 350 Puls DW EX MIG/MAG inverter welding machine with expert XQ 2.0 Control, Pulse and separate wire feeder. This EWM welder is a decompact, all round welder with all the characteristics expected of a professional welder, included in this package is: Drive XQ wire feeder with Drive XQ HP, pivot support for wire feeder, water cooled, 14 pol 1.8m intermediate hose package, wire spool adaptor, MIG torch with OLED screen which is water cooled, has X technology and is 4m in length, workpiece clamp, pressure regulator, coolant and mains plug. The welding machine has intuitive XQ Expert control which allows user to set all parameters easily, switch between processes and procedures such as ForceArc/ForceArc Puls to RootArc/RootArc Puls or Standard/pulse. This Expert machine with OLED screen also features; arc length correction, adjustment of arc dynamics (the choke effect), standby function, kilowatt display and effective arc power for calculating the energy per unit length. Why we love the EWM Titan XQ350 Puls DW EX Perfect for creating MIG/MAG seams, even with long welding leads. Innovative EWM Synergic characteristics- Rootarc XQ/Rootarc PulsXQ, Cold arcXQ/Coldarc PulsXQ, Forcearc/Forcearc PulsXQ, Wiredarc XQ/WiredarcPuls XQ, Puls/Superpuls and Positionweld. Synergic characteristics for GMAW standard or pulsed welding for steel/CrNi/Aluminium. Non-synergic operation for manual setting of weld parameters. Also suitable for MMA welding, TIG welding and gouging Adjustable start and end-crater functions Infinitely adjustable arc dynamics (choke effect) flexFit casing system: Many accessory parts and options can be fixed to the welding machine using conventional slot nutse Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires The high 1500 W cooling capacity, high-performance centrifugal pump and 8-litre coolant tank make for excellent torch cooling, resulting in cost savings on consumablesg Adjustable hot start current and hot start time Optional network connectivity with the ewm Xnet software via an integrated or external gateway IP23 spray water protected Connection capability for remote control and function torch Energy-saving thanks to high efficiency and standby function Drive XQ / Drive XQ IC 200 with high-precision, powerful EWM eFeed 4-roll drive to reliably feed all solid and flux cored wires Equipment as supplied: Welding machine with Expert XQ 2.0 control, including wheel kit with single cylinder bracket, 1.8Mtr Interconnecting Cables, water cooling and 5m mains connection lead The price shown includes the following components:   Titan XQ 350 puls decompact, including all characteristics and welding processes Drive XQ wire feeder, Drive XQ HP Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 450 A / 60 %, 70 mm² Pressure regulator with manometer, 30 l Mains plug, assembled,