Cibo FMCMC Combi Ceramic Interleaved PTX Flap Wheel 120x110MM xM14 Thread

Unofficially re-named ‘The Ginger Ninja’ our new 60 grit ceramic cloth wheels have a surprisingly high durability and cut rate. Use the Combi 60 grit ceramic wheels for edge shaping surface damage removal and even light scale removal on stainless steel to create a consistent grain finish. Dependent on the final finish required a fine satin finish can be achieved if the FMCM/60 is followed by either an FMCM/80 wheel or FMTM. Use with Finimaster Pro machine or M14 driven satin polishing machines. Recommended operating speed: 2,400 – 3,000rpmMax operating speed: 4,200rpm Cibo’s Ceramic Combi Grinding Wheels: The development of the ceramic combi wheel has created the first grinding wheel that combines an aggressive ceramic linen with a soft tex. This provides a wheel that has two functions.  Press hard and you have an aggressive wheel with a high grinding capacity.  Grind with less pressure and you can easily create a fine smooth finish with this wheel. Combining these two properties allows you to grind starting with a 2B finish through to a polished finish 220 in one go.  Furthermore, grinding with this wheel generates a much lower temperature due to the ceramic linen.  This also makes it possible to machine very thin plates without risking deformation caused by the generation of excessive heat. Applications: – Brush thin (curved) plates. – Clean up surfaces to be welded. – Remove damage or machine markings and refinish in one go. – Completely remove mill scale (cold rolled) and brush to industrial finish 220 in one go. – Prepare surfaces for paints and coatings.