Cibo SMFP Finipower 110V Polisher

Finipower 110V Polisher This 110v polisher is a 125mm variable speed sander which is great for use in any polishing process, including: stone, glass, brass, copper and automotive paints.  Vibration data: base test data was conducted and this depends on grade, density of the wheels used and the speed of the machine. Finipower-1.59m/s2.   This variable speed grinder is ideal for stainess steel due to: stainless steel heats quicker than steel therefore will work harden if operating at the normal grinder speed. 11000rpm is too high (standard UK grinders are around this) the variable speed means much more control so reduces any chance of damage.  increased heat causes the abrasive to glaze over due to heat or will increase consumable use, lower speeds prevent this.  Powerful variable speed grinder: This machine is heavier in weight to other grinders but it is higher powered. The higher torque means higher grinding and finishing quality.   Cibo RCD Rapid Combi Discs  Increased disc life, better finish and lower costs with the Finipower plus.  these discs operate at their best at 3500-4000 rpm so the Finipower Plus is ideal. 

Cibo SMFP Finipower 230V Polisher

Finipower 230V Polisher This 230v polisher is a 125mm variable speed sander which is great for use in any polishing process, including: stone, glass, brass, copper and automotive paints.  Vibration data: base test data was conducted and this depends on grade, density of the wheels used and the speed of the machine. Finipower-1.59m/s2.   This variable speed grinder is ideal for stainless steel due to: stainless steel heats quicker than steel therefore will work harden if operating at the normal grinder speed. 11000rpm is too high (standard UK grinders are around this) the variable speed means much more control so reduces any chance of damage.  increased heat causes the abrasive to glaze over due to heat or will increase consumable use, lower speeds prevent this.  Powerful variable speed grinder: This machine is heavier in weight to other grinders but it is higher powered. The higher torque means higher grinding and finishing quality.   Cibo RCD Rapid Combi Discs  Increased disc life, better finish and lower costs with the Finipower plus.  these discs operate at their best at 3500-4000 rpm so the Finipower Plus is ideal.     

Cibo Finimaster Pro 110V PTX Drum Sander machine

Cibo Finimaster Pro Drum Sander Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro  We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing  

Cibo Finimaster Pro 110V PTX Drum Sander Set 1 Kit

Cibo 110V Finimaster Pro Drum Sander (Set 1) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.  We stock a range of Cibo products, take a look here or get in touch for our full range.  Finimaster Drum Sander set 1 contents: FMCI 110v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5)   For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing    

Cibo Finimaster Pro PTX Sander 110V Set 2 Drum

Cibo Finimaster Pro 110V Drum Sander Set 2 The 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro  We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    We stock a range of Cibo products, take a look here or get in touch for our full range.    This Cibo Finimaster Drum Sander Set 2 Contains: FMCI 110v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMCM Combi Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5) Inoxiclean Stainless Steel Cleaner (x1 can) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m) Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing Grain finishing: Use the Finimaster Pro with abrasive sleeve on inflatable tyre, then a wide range of tex and combination wheels to get the desired finish.  Tube finishing: Use the drive roller with grip fixing belts to allow best satin finishing in the tightest locations.   This Cibo Drum stander is the ideal machine for sheet, round tube, square tube, square tube and box section finishing. Finimaster Pro Drum Sander has 5 inch diameter to give best quality, no mark, chatter free surface finish. 

Cibo Finimaster Pro 230V PTX Drum Sander Set 1

Cibo Finimaster Pro Drum Sander (Set 1) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Contents of Set 1: FMCI 230v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5)   We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing    

Cibo Finimaster Pro 230V Drum Sander Set 2

  Cibo Finimaster Pro Drum Sander (Set 2) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Contents of Set 2: FMCI 230v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMCM Combi Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5) Inoxiclean Stainless Steel Cleaner (x1 can) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m)   We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing The Finimaster Pro is the best satin polishing machine for sheet, rounded, square tubing and box section finishing. This machine operates with 5 inch diameter wheels prevents chatter and high quality surface finish each time. 

Cibo Rebel One Unitised Metal Polishing Discs (SAG Range) 4.5(115mm) & 5"(125mm)

Applications: These unitised discs are mounted on a backing disc for directly fitting onto the flanges of angle grinders (preferably variable speed) and metal polishers. Unitised material is re-processed non-woven abrasive. By varying the hardness, formulation and abrasive mix different performance characteristics are achieved.  At their softest, FAG 4 discs are ideal for stripping paint and coatings due to their conformity. They also work well on aluminium, leaving a better finish than may be obtained with a conventional stripping disc. SAG grades 5 & 7 are ideal for surface improvement and are often known as pre-polishing discs. Use grade 5 for polishing and grade 7 where a little more aggression is required, such as in blending ground off TIG welds. MAG discs are more aggressive still and will leave light swirl marks. The grade MAG5 is also great on aluminium and brass, with low clogging properties. MAG will grind off small amounts of metal, leaving a fine swirl finish. Specification: Made with non-woven abrasive material blend. Mounted on a fibreglass backing plate with 22.2mm fixing. No backing pad required. Free from iron contamination - ideal for stainless steel. Advised speed: 4,000-5,000rpm. Max speed 115mm: 10,000rpm, 125mm:8,000rpm. For use on cool metal. 

TEC Products Cibo Stainless Steel Polishing Kit 4.5"(115mm)

TEC Products Own Put Together Stainless Polishing Kit, Tried & Tested By Many Of Our Customers To Give Top Results  Kit Consists Of: 1 x Cibo 4.5"(115mm) Unitised Grade 5 SAG Discs 1 x Cibo 4.5"(115mm) Felt Grinder Discs  1 x Pink Polish/Buffing Compound Bar  When used together this kit gives the ultimate mirror polish finish on stainless steel 

Cibo Trizact Grip Polishing Disc 5"(125mm) + 3"(75mm Inner)

Applications: These discs are made with 3M Trizact 237 synthetic abrasive laminated to a grip backing. In this form they are part of a process to rapidly blend TIG welds and improve stainless steel surfaces most of the way to a polish, in fewer stages than would be required with conventional abrasives. Trizact's uniform grain structure improves consistency on batches so that the first and last components finished have a high level of consistency.    In order to give maximum disc life, the disc centres will press-out for re-use on 75mm backing pads. Example: 115 + 75mm is a 115mm disc with 75mm press-out option. When outer edge is worn, the 75mm centre can be pressed out and re-used. Specification: Trizact 237 synthetic abrasive. Laminated to a loop grip (Velcro type) backing. For use with suitable backing pad. Inter-liner recommended for use on stainless flat. Centre press-out (choose +75mm) available for re-use (wear tends to be fastest around perimeter). Sold in packs of 10