BÖHLER Bohler 1.2MM DiamondSpark 46 RC Flux Cored MIG Wire 16KG 300MM Metal Reel

DiamondSpark 46 RC Seamless cored wire Low hydrogen all-positional seamless rutile flux cored wire for welding carbon-manganese and fine grain steels using Argon-CO2 or pure CO2 shielding gas. DiamondSpark 46 RC is a seamless copper-coated rutile flux-cored wire, developed for modern shipyard requirements and daily construction challenges. The wire has excellent weldability, productivity for welding of low and medium alloyed steels using Argon-CO2 shielding gas or pure CO2. The weld deposit has excellent mechanical properties till -30°C in mix gas and till -20°C in pure CO2 shielding gas. DiamondSark 46 RC is approved with both shielding gases in the grade 3YSH5 and the hydrogen level guarantee is below 4 ml/100 g, tested at 27°C , 80%HR for 12 weeks without any increase.   Product Features: Seamless design Extremely clean manufacturing process Ultra-low-hydrogen weld metal Total resistance against moisture absorption during storage and use Optimal protection against hydrogen cracking No porosities observed Faster painting process Fast freezing rutile slag system Enhancing travel speed and arc stability in positional welding Productive positional welding Automatic slag detachability Wide parameter window More spray arc welding Easy arc setting Easy welding in overhead position Excellent feedability Low contact tip wear Trustable performance with long welding cable Less down-time for maintenance No wire breaks Stable arc Sharp arc Low spatter Good weldability Good wetting Less post-weld cleaning Very flat root pass No undercut Copper coated Excellent current transfer Rust resistance Easy handling Safer storage Designed chemistry Excellent CVN impact toughness down to –30°C mix gas and to -20°C in pure CO2 Highest welding performance in welding travel speed in particular in PF position Low fume emission Wide margin to cover both strength and CVN impact requirements Faster weld execution Healthy working place   Typical Applications: General construction Shipbuilding  

BÖHLER Bohler Phoenix CEL 70 6010 Welding Electrodes

This cellulosic welding rod is for vertical down circumferential welds in pipeline constructions. Ideal for root runs including vertical up. It has excellent weldability in root pass welding (DC ±); also in the vertical up position. It is also CTOD, HIC and HSCC tested.

BÖHLER Bohler FOX CEL Cellulosic Electrodes 6010

Cellulose electrode for vertical-down welding of large diameter pipelines; suitable for root runs (vertical down and vertical up), hot passes, filler and cover layers. Especially recommended for root run welding. Highly economical compared with vertical-up welding. Apart from its excellent welding and gap bridging characteristics FOX CEL offers a weld deposit with outstanding impact strength values and thus offers the benefit of still more safety in field welding of pipelines. BÖHLER FOX CEL can be used in sour gas applications (HIC-Test acc. NACE TM-02-84). Classifications: EN ISO 2560-A - E 38 3 C 2 1 EN ISO 2560-B - E 43 10 A U AWS A5.1 - E6010 AWS A5.1M - E4310

BÖHLER Bohler FOX EV50 E7018 VacPac Low Hydrogen Welding Electrodes

Bohler Fox EV50 7018 Welding Electrode In A Vac-Pack Unalloyed basic coated stick electrode Main benefit Basic coated stick electrode for high quality welds for unalloyed steels up to 420 MPa yield strength. User Benefits: Basic coated Pure, cryogenic weld metal Big field of applications for higher demands Suitable for service temperatures down to -50 °C Moisture resistant coating Low hydrogen content Very low hydrogen content in the all weld metal Avoids hydrogen induced cracking Electrodes can be used up to 9h after opening a Dry System packaging or a hermetical tin without re-drying NACE TM-02-84 approved » Suitable for sour gas applications Safer welding, CTOD tested Designed for high demand welds Many 3rd party approvals Welding for high demanding industries with required approvals Available in Dry System vacuum packs Welding directly out of the package without re-drying Less time for preparation, always safe packed, fresh stick electrodes  Typical Applications: Steel constructions Ship building Pressure vessels Offshore industry Approvals: TÜV (00426), DB (10.014.02), ABS, BV, DNV GL, LR, RMR, RINA, CRS, CWB ( Ø 3,2-6,0 mm), CE

BÖHLER Bohler Mild Steel TIG Filler Rod EMK 6 - 5KG

Bohler EMK 6 Mild Steel TIG Filler Rod - 5KG ER70S-6 Mild Steel Filler Rod GTAW rod with high silicon content. The welding rod is suited for joints in boiler and vessel fabrication as well as in structural steel engineering. Böhler EMK 6 can be used in sour gas applications (HIC-Test acc. to NACE TM-02-84). Test values for SSC-test are available too. Spec: AWS A5.18 ER70S-6 Rod Diameter: 1.6mm, 2.0mm, 2.4mm, 3.2mm Approvals: TÜV (09717.), LTSS, SEPROZ, CE