BÖHLER Bohler Union ER5183 AlMg4.5Mn Aluminium TIG Filler Wire 1.6 & 2.4MM - 2.5KG Pack

Bohler Union ER5183 AlMg4.5Mn Aluminium TIG Filler Wire 1.6 & 2.4MM - 2.5KG Pack Classifications EN ISO 18273-A AWS A5.10 S Al 5183 (AlMg4,5Mn0,7(A)) ER5183 Characteristics and typical fields of application TIG-rod for welding of AlMg alloys. The weld metal is resistant against sea water. Base material should be cleaned near the seam. Pre-heating 150 °C for plates > 15 mm Base materials EN AW-5083 [AlMg4,5Mn0,7] AlMg4,5Mn 3.3547 EN AW-5086 [AlMg4] AlMg4Mn 3.3545 EN AW-5019 [AlMg5] AlMg5 3.3555 EN AW-6060 [AlMgSi] AlMgSi0,5 3.3206 EN AW-6005A [AlSiMg(A)] AlMgSi0,7 3.3210 EN AW-6082 [AlSi1MgMn] AlMgSi1 3.2315 EN AW-6061 [AlMg1SiCu] AlMg1SiCu 3.3211 EN AW-7020 [AlZn4,5Mg1] AlZn4,5Mg 3.4335 EN AC-51300 G-AlMg5 3.3561 EN AC-51400 G-AlMg5Si 3.3261 Typical analysis of TIG-rod (wt.-%) Al Mg Mn Cr Ti wt.-% bal. 4.3 – 5.2 0.6 – 1.0 0.05 – 0.25 < 0.15 Mechanical properties of all-weld metal Yield strength Rp0.2 Tensile strength Rm Elongation A (L0=5d0) MPa MPa % 125 275 17 Operating data Polarity: AC Shielding gases: (EN ISO 14175) I1 Marks: 3.3548 / AlMg4,5Mn ø mm 1.6 2.0 2.4 3.2 4.0 Approvals TÜV (02196), DB (61.132.03), CE