Weld Star Weldstar ER312 Stainless Steel Migwire 15KG 300MM Reel

Features and Applications Austenitic stainless steel wire originally designed to weld cast alloys of similar composition. It gives a two-phase weld deposit with substantial percentages of ferrite in austenite matrix. Ideal for welding dissimilar metals such as carbon steel to stainless steel, particularly those grades high in nickel. Due to its high ferrite level, ER 312 is very adapted to heterogeneous welding, especially when one of the components is fully austenitic. Good corrosion oxidation resistance at high temperature due to its high content of Cr. Service temperatures should be below 420°C to prevent formation of secondary brittle phases. Precision layer wound for superior wire feeding characteristics. Typically used on industrial furnaces, annealing chambers, fused salt treatment installations and boiler parts, as well as heat exchangers etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Mild and low alloy steels, stainless steel of similar composition, Buffer layers, armor plate, 409, 304, difficult to weld steels such as:, 25CrMo4, 42CrMo4, 50CrMo4, 42MnV7, 1.7218, 1.7225, 1.7228, 1.7223, AISI: 4130, 4140, 4150, C45, C60, tool steel repairs etc* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 29 9 AWS A5.9 - ER 312   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.091 1.59 0.46 0.004 0.021                   Ni% Cr% Mo% Cu%       20.68 26.65 0.040 0.21         Mechanical Properties Tensile Strength ≥650 MPa   Yield Strength ≥450 MPa   Elongation ≥15 %   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

Weld Star Weldstar Arctrode E7018-1 MMA Welding Electrodes 5KG

Weldstar Arctrode E7018-1 MMA Welding Electrodes 5KG Strong and tough, this electrode is suitable for steel construction, machine manufacturing and shipbuilding including low purity and high carbon steels. Produces tough and crack free joints, even on steels with a carbon content of up to 0.40%. Good for out of position welding except for vertical down. Weld deposit with low hydrogen content. Weld metal recovery of about 120%. Requires a minimum of 2 hours re-drying time at 300°C and 350°C.

Weld Star Weldstar ER4043 AlSi5 Aluminium TIG Filler Wire 1.6, 2.4 & 3.2MM - 2.5KG Pack

Weldstar 4043 AlSi5 Aluminium TIG Filler Wire 1.6, 2.4 & 3.2MM - 2.5KG Pack Aluminium TIG Filler wire for welding aluminium alloys with a maximum 2% alloying elements. Including aluminium alloys containing up to 7% Si. Features and Applications: The silicon addition results in improved fluidity (wetting action), making the alloy the preferred choice for welders. ER 4043 is not sensitive to weld cracking and produces bright, almost smut-free welds. Not recommended for anodizing. Thicker sections should be preheated to (150°C) prior to welding. Typically used on many industrial manufacturing sectors, such as automotive, production of mobile equipment and shipbuilding etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials AlMgSi 0, AlSiMg (A), AlSi 1 MgMn, AlMg1SiCu, 3.3206, 3.3210, 3.2315, 3.3211, EN AW 6060, EN AW 6005A, EN AW 6082, EN AW 6061, EN AC 45000* * Illustrative, not exhaustive list   Standards EN ISO 18273 - S Al 4043 (AlSi5) AWS A5.10 - ER 4043   Chemical Composition % (Typical) Si% Fe% Cu% Mn% Mg%     5.0198 0.1578 0.0124 0.0035 0.0051                   Zn% Ti% Be% Al%       0.0036 0.0177 <0.0001 Rem.         Mechanical Properties Tensile Strength ≥120 MPa   Yield Strength ≥40 MPa   Elongation ≥8 %   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Dual Core HF600-G MIG Wire 1.2MM - 15KG

Weldstar Dual Core HF600-G MIG Wire 1.2MM - 15KG Features and Applications Seamless high fill copper coated tubular wire for semi-automatic applications. Ideal for hardfacing components subject to abrasion and moderate impact. Unique welder appeal. Deposition rate increased by up to 20% when compared to solid wire. Martensitic weld metal contains finely dispersed hard carbides ensuring an optimal balance between abrasion, friction and impact resistance. Abrasion resistance at service temperatures up to 450°C. Preheat will be determined by the application and whether micro cracking in the deposit is acceptable. According to the base material preheating in the range 150°C - 300°C may be necessary. Precision layer wound for superior wire feeding characteristics. Typically used on bucket teeth, bucket lips, bulldozer blades, crusher jaws, scraper blades, chutes, pump housings, conveyor screws, slide plates, gear teeth, crusher hammers, drilling bits, ploughshares, reamers etc. Test Certificates can be found online @wilkinsonstar247.com    Standards EN ISO 14700 - T Fe2   Chemical Composition % (Typical) C% Mn% Si% P% S% Cr%  Ni% 0.5 1.2 0.6 0.010 0.013 5.7 0.05               Mo% Cu% Fe% Co% V% W%   0.80 0.10 Bal 0.006 0.010 <0.09     Hardness (HRC) Current Type Hardness - First Layer Hardness - Third Layer DC+ 52-55 54-57 DC- 55-57 57-60 Peak hardness in the range 50-62 HRC could be achieved in three layers. Direct polarity negative reduces dilution and favours higher hardness. Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Wear Type Suitability   Welding Parameters Ømm Current (A) Voltage (V) 1.20 mm 110-300 16-32   Shielding Gases EN ISO 14175 - M12, M20, M21   Welding Positions EN ISO 6947 - PA, PB

Weld Star Weldstar Monel 400 NiCu-7 TIG Filler Wire 5KG

Features and Applications Nickel-copper alloy designed for welding Monel. Good bead appearance and excellent corrosion resistance in saline solutions. The weld metal has an excellent resistance to a large amount of corrosive media’s. This alloy is also used for weld overlay. Typically used in marine construction, especially offshore, heat exchangers, pipelines, desalination plants, chemical, petrochemical and energy engineering industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Monel alloys 400 and 404** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 4060 - NiCu30Mn3Ti AWS A5.14 - ER NiCu-7   Chemical Composition % C% Mn% Fe% P% S% Si%   max 3.00 0.50 max max max   0.15 4.00 2.50 0.020 0.015 1.00                 Cu% Ni% Co% Ti% Al% Nb+Ta%   28.00 62.00 max 1.50 max max   32.00 69.00 1.00 3.00 1.00 0.50     Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥180 MPa   Elongation ≥30%   Impact Strength ≥80 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy C22 NiCrMo10 TIG Filler Wire

Features and Applications Nickel-chromium-molybdenum alloy designed for joining C22, 625, 825 or combinations of these alloys. Provides a tough Nb-free weld metal for dissimilar welds in super austenitic and super duplex stainless steels. Offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Extensively used for overlays and cladding of lower alloy steels. Typically used in the welding of aggressively corrosive media in chemical processing plants, corrosion resistant overlays and in severe offshore and petrochemical environments etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 22, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6022 - NiCr21Mo13Fe4W3 AWS A5.14 - ER NiCrMo-10   Chemical Composition % C% Mn% Fe% P% S% Si% Cu% max max 2.00 max max max  max 0.010 0.50 6.00 0.020 0.010 0.08  0.50               Ni% Co% Cr% Mo% V% W%   49.00 max 20.00 12.50 max 2.50   min 2.50 22.50 14.50 0.30 3.50     Mechanical Properties Tensile Strength ≥690 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star Weldstar ER2209 Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER410 Stainless Steel TIG Filler Wire 5KG

Weldstar ER410 Stainless Steel TIG Filler Wire 5KG Features and Applications Stainless steel wire designed to weld stainless steels of similar composition, including deposition of overlays on carbon steels to resist corrosion, erosion and abrasion. ER 410 contains sufficient carbon to enable air-hardening transformation of the weld metal to a predominately martensitic microstructure. Preheat and postweld heat treatments are required to achieve welds of adequate ductility for many  engineering purposes. Ideal for welding or repairing 12% Cr air-hardenable stainless steels like types 410, 416, 420, 431 and cast C-15. Typically used on applications for heat furnaces and turbine part production etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Wrought or cast martensitic, types 403, 405, 410, and 416 stainless steel* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 13 AWS A5.9 - ER 410   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.015 0.55 0.48 0.004 0.028                   Ni% Cr% Mo% Cu%       0.37 12.90 0.08 0.15         Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥250 MPa   Elongation ≥15 %

Weld Star Weldstar A18 ER70S-6 Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. The high silicon content increases the fluidity of the weld pool, creating a smoother bead appearance and resulting in minimal post-weld grinding. Good mechanical properties at sub-zero temperatures down to -40°C. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 42 4 3Si1 AWS A5.18 - ER 70S-6  

Weld Star ER2594 Super Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic wire for welding all grades of super duplex stainless steels. Provides matching chemistry and mechanical property characteristics to wrought super duplex alloys such as 2507 and Zeron 100. Excellent resistance to aggressive environments as well as to pitting and crevice corrosion in warm seawater applications. The presence of Cu and W provides superior resistance to sulphuric and hydrochloric acids when compared to similar alloys without these additions. Improved resistance over austenitic stainless to erosion corrosion and fatigue. Precision layer wound for superior wire feeding characteristics. Typically used in the oil and gas industries, seawater systems, petrochemical and pharmaceutical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32530, S32550, S32750, S32760, 1.4501** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G Z 25 9 4 N L W AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P% Ni%    <0.03 <1.00 <1.00 <0.020 <0.035 9.28                 Cr% Mo% Cu% N% W%     25.12 3.60 0.59 0.22 0.62       Mechanical Properties Tensile Strength ≥750 MPa   Yield Strength ≥550 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER2209 Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Precision layer wound for superior wire feeding characteristics. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF     Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.