Shindaiwa ECO 200 Diesel Generator Welder On Wheelbarrow Chassis

The Shindaiwa ECO 200 Diesel Generator Welder on Wheelbarrow Chassis is a professional 200A engine-driven MMA welding machine and 110V generator, designed for demanding on-site welding, construction, fabrication and industrial maintenance applications. Powered by a reliable Kubota Z482-B water-cooled diesel engine, the ECO 200 combines dependable DC welding performance with an integrated auxiliary power supply, making it an excellent solution for welders working in remote locations or on sites without a mains electricity supply. Delivering an adjustable 50–200A DC welding output, the Shindaiwa ECO 200 is suitable for MMA (Stick) welding using electrodes from 2.0mm to 5.0mm, including compatible cellulosic electrodes. In addition to its welding capabilities, the ECO 200 features a 110V centre-tapped earth (CTE) auxiliary generator, providing 3.0kVA continuous power at 50Hz. This allows operators to power suitable 110V site tools, including angle grinders and other equipment, while welding. The integrated fuel-saving automatic idling system helps reduce unnecessary fuel consumption during periods of inactivity, while RCD protection provides an additional electrical safety feature. Supplied on a wheelbarrow-style chassis, the machine is designed to offer improved manoeuvrability around construction sites, fabrication yards and industrial environments. Combining robust construction, dependable welding performance and practical site portability, the Shindaiwa ECO 200 Diesel Welder Generator is an excellent choice for professional welders, contractors and engineering companies requiring reliable mobile welding and auxiliary power. Key Features Genuine Shindaiwa ECO 200/UK diesel welder generator 200A maximum DC welding output Adjustable welding current from 50–200A Suitable for MMA / Stick welding Compatible with 2.0mm to 5.0mm welding electrodes Suitable for compatible cellulosic welding electrodes Reliable Kubota Z482-B water-cooled diesel engine 110V CTE auxiliary power supply 3.0kVA continuous generator output at 50Hz Simultaneous welding and auxiliary power operation Fuel-saving automatic idling system RCD electrical protection 15-litre diesel fuel tank Up to approximately 12 hours of operation, depending on load and conditions Wheelbarrow chassis for improved site mobility Ideal for demanding construction and industrial applications Typical Applications Ideal for: On-site MMA / Stick welding Construction and structural steelwork Mobile welding and fabrication Plant and machinery maintenance Agricultural equipment repairs Industrial engineering Pipework fabrication and repairs Remote welding locations Site maintenance and shutdown work Powering compatible 110V site tools General repair and fabrication work Technical Specification SpecificationDetails Brand Shindaiwa Model ECO 200/UK Product Type Diesel Welder Generator Welding Process MMA / Stick Welding Output 50–200A DC Electrode Capacity 2.0–5.0mm Auxiliary Voltage 110V CTE Auxiliary Output 3.0kVA at 50Hz / 3.3kVA at 60Hz Generator Phase Single Phase Engine Kubota Z482-B Engine Cooling Water-Cooled Fuel Type Diesel Fuel Tank Capacity 15 Litres Approximate Running Time Up to 12 Hours Automatic Idling Yes Electrical Protection RCD Breakers Chassis Wheelbarrow Length 1080mm Width 670mm Height 860mm Approximate Dry Weight 249kg Sound Power Level 94 dB LWA  

Instagrid Go 110V Battery Pack

Instagrid Go 110V Battery Pack  Experience the freedom from mains power with the Instagrid GO Portable Power Supply System. Engineered to redefine mobile energy, this cutting-edge system delivers powerful, clean, and silent energy wherever you need it. Thanks to innovative micro-level inverter technology, the Instagrid design is compact, lightweight (just 21kg), and portable enough to carry in one hand, yet powerful enough to rival 32A/110V construction site power. With a rated output of 3.6kW and an impressive peak power output of 18kW, Instagrid Go provides dependable energy for professionals working in remote locations, construction sites, or any off-grid environment. Say goodbye to noisy, polluting generators and hello to an emission-free revolution. Built to withstand outdoor and indoor conditions, the durable IP44-rated housing ensures reliability in any weather. Featuring a simple, plug-and-play design and adaptable power outputs, Instagrid makes powering your tools, welder, or devices effortless. Whether you’re powering heavy-duty tools or sensitive electronics, rest assured that the system generates a pure AC sine wave for stable, efficient energy delivery. Connect an optional link module to pair up to three Instagrid GO units for extended jobs or larger demands. Silent, lightweight, and eco-friendly, Instagrid is the portable power solution for modern professionals demanding high-performance energy on the go. Backed by a 4-year manufacturer’s warranty, you’ll enjoy peace of mind knowing this high-performance product is built to last.

Genset 200A Honda Petrol Engine Driven Welder

Compact and lightweight portable engine driven welder. Equipped with a stage 5, 3000 RPM Honda engine.  Asynchronous alternator for enhanced welding current quality, clean and distortion-free waveform.  Just like all the GenSet engine driven welders, it is designed to be used as both generator and welder  simultaneously, its simple and smart design allows a practical and easy use.

Genset 300A Yanmar Diesel Engine Driven Welder

Compact and resistant engine driven welder, thanks to the forklift pockets and the practical central lifting hook is suitable for frequent handling. Equipped with Yanmar 3000 RPM engine and on board control, it’s fitted for remote control operation. Asynchronous alternator for a better welding current quality, clean and distortion free wave form.

Genset 400A Yanmar Diesel Engine Driven Welder

Compact and durable, fitted by central top lifting hook and forklift pockets to make handling easy. Equipped with 3000 RPM Yanmar engine 3TNV80. Control panel with digital controller to check mechanical and electrical data.  Asynchronous alternator for a better welding process quality and a clean distortion for wave form. Designed to work simultaneously both as welder and generator.

Instagrid One 230V Battery Pack Includes 16A & 13A Outlets

Instagrid One 230V Battery Pack – Portable Power Without Limits The Instagrid One 230V Battery Pack is a high-performance, professional-grade portable power solution designed to deliver reliable, grid-quality electricity wherever you need it. Engineered for demanding environments, it provides a continuous 230V AC output, making it ideal for powering heavy-duty tools, equipment, and devices on construction sites, outdoor locations, or emergency situations. Equipped with both 16A and 13A outlets, the Instagrid One offers versatile connectivity for a wide range of applications, from industrial machinery to everyday electrical devices. Its advanced lithium-ion battery technology ensures consistent power delivery, while its robust design guarantees durability in tough working conditions. Unlike traditional generators, the Instagrid One operates silently and produces zero emissions, making it a cleaner, safer alternative for indoor and outdoor use. Its compact, portable form factor allows for easy transport and quick setup, helping you stay productive without the hassle of fuel, fumes, or noise.  

Kemppi Master M 353G Synergic Air Cooled MIG Welder 350A 415V

Kemppi Master M 353G Synergic Air-Cooled MIG Welder – 350A, 415V The Kemppi Master M 353G Synergic is a high-performance MIG/MAG welding power source engineered for demanding industrial environments. With a rugged design, advanced control features, and robust arc characteristics, this 350 A, 415 V air-cooled system delivers exceptional productivity and weld quality across a wide range of materials and applications. Built on Kemppi’s proven Master platform, the Master M 353G combines flexibility with ease of use. Its synergic control system automatically manages key welding parameters based on the selected wire type and diameter, simplifying setup and reducing the need for manual adjustments. This makes it ideal for high-output fabrication, structural steelwork, pressure vessels, and heavy engineering, where consistent results are critical. Precision Performance & Synergic Control At the heart of the Master M 353G is its advanced synergic technology, which dynamically adjusts voltage and wire feed speed in real time. Welders simply select the material and wire type, and the machine calculates optimal parameters — ensuring stable arcs, reduced spatter, and excellent bead appearance, even in challenging joint configurations. Industrial Durability & Compact Efficiency Designed for harsh workshop and production environments, the Master M 353G features a robust, air-cooled build with high-quality electrical components that withstand long operating cycles. Its efficient cooling system maintains performance during heavy use while reducing maintenance needs compared to more complex liquid-cooled units. Wide Application Range With a maximum output of 350 A, this unit handles thick-section welding with ease while offering the control needed for thinner materials. It supports a broad range of consumables and metal types — including mild steel, stainless steel, and aluminium — making it a versatile choice for everything from light fabrication to heavy structural work. Advanced Connectivity & Control Options The Master M 353G offers multiple control interfaces, including remote control panels and optional MIG guns with trigger switches. Integrated diagnostics and intuitive user settings enable fast setup, reduced downtime, and improved workflow efficiency on busy production floors. Key Features: Red Dot Product Design Award winner 2023 Versatile process selection for industrial welding: Manual, 1-MIG, Pulse MIG, DC TIG, and stick welding (MMA) Welding programs include Fe, Ss, Al, CuSi, CuAl, Fe Metal, Fe Rutil, FC-CrNiMo materials MAX and Wise welding processes for challenging steel, stainless steel, and aluminium welding applications Cobot-ready welding machine, fast and easy setup with a Digital Connectivity Module and Kemppi Cobotics app Weld Assist establishes guidance for welding parameters Self-charging LED work lights improve work safety Safe-lift grab handle for safe lifting Two and four-wheel carriage options for easy movement SuperSnake GTX sub-feeder enables maximum reach in challenging welding sites Reports welds and work orders to WeldEye software through the welding machine's user interface WeldEye ArcVision offers better insight into your welding production WeldEye Quality Management offers a 360-degree view and 100% traceability of every welding project Kinetic spool brake prevents wire spool overrun, automatically slowing and reversing the filler wire spool at the end of each weld Compatible with a generator and multi-voltage use Memory channels for saving the best welding parameter settings Weight 27 kg Ultimate welding comfort and long-lasting, high-quality consumables with Flexlite GXe welding guns Ideal For: Industrial fabrication and structural steelwork Shipbuilding and heavy engineering Pressure vessel and pipeline fabrication High-volume manufacturing environments Kit Includes: Kemppi Master M 353G Synergic Air Cooled MIG Welder Kemppi Flexlite GXe323G 3.5Mtr MIG Welding Torch The Kemppi Master M 353G is an investment in performance, reliability, and productivity — a welding platform that empowers operators to work faster, cleaner, and with confidence across the full spectrum of MIG/MAG applications.

Jasic EVO Power Arc 140 MMA Welder

Power Arc 140 Inverter – Tough, Reliable, and Built for Performance Engineered for demanding environments, the Power Arc 140 Inverter combines rugged durability with advanced welding control. Its ergonomic design makes it comfortable to handle, while intelligent synergic control delivers smooth, consistent welds across a wide range of applications. With Smart Lift TIG capability, the Power Arc 140 provides precise arc starts with minimal spatter. Adjustable Hot Start and Arc Force settings let you fine-tune performance for different jobs, while anti-stick protection prevents electrodes from fusing, helping maintain a cleaner, more efficient workflow. The innovative ABAP (Active Balancing Air Passage) system enhances cooling efficiency, supported by a fan-on-demand feature that reduces noise and extends component life. For added safety, the built-in Voltage Reduction Device (VRD) protects operators in low-voltage environments, while internal safeguards defend against overcurrent and overheating. Designed for reliability, the Power Arc 140 features robust 35–50 mm cable sockets, ensuring a secure, professional connection every time. Dependable, efficient, and built to last — it’s the perfect solution for professional welding performance wherever it’s needed. *** PLEASE NOTE MACHINE COMES WITHOUT LEAD SET *** Key Features Rugged ergonomic design Intelligent synergic control Smart Lift TIG Anti-Stick, adjustable hot start and arc force ABAP: Active Balancing Air Passage Fan on demand Voltage Reduction Device (VRD) Key power electronic component protection Overcurrent and overheat 35-50mm Cable sockets Backed by a 5-Year Warranty.

Jasic EVO MIG 350S Multi Process Separate Water

Jasic EVO MIG 350S Multi Process Separate Water Cooled The Jasic EVO MIG 350S, a Separate Water-Cooled Model, is built for professionals who demand durability and accuracy in every weld. Powered by an advanced ARM and DSP dual microprocessor system, it regulates the arc output in real time, adapting instantly as conditions change across MIG/MAG, MMA, and DC Lift-TIG processes. The separate wire feed unit is equipped with a ClearVision HD digital display for enhanced visibility and control. Hollow rotary shaft encoders give precise adjustments, while 2T/4T, Cycle, and Spot trigger functions make it simple to adapt to your preferred welding style. With both synergic and manual modes available, you’ll achieve smooth droplet transfer and consistent bead quality no matter the application. For longer sessions, the integrated water-cooled technology keeps the torch running at peak performance. The dual drive wire feeder features 37.45mm rollers, ensuring reliable delivery even with demanding materials. An IP23S protection rating and robust component protection provide long-term reliability. Backed by Jasic’s 5-year warranty, it’s a machine built to last. Efficiency comes as standard. Smart cooling only runs when needed, while auto sleep mode reduces power draw to under 10W when idle, helping to lower running costs without affecting performance. Engineers Mode provides quick access to proven parameter settings, and built-in program memory stores your own configurations for repeat jobs. Connectivity is also taken further. Control the machine your way—via wired, wireless, or mobile app options. The USB-C port allows easy software updates and device charging, and with generator-friendly operation, the EVO MIG 350S is just as dependable on-site as it is in the workshop. What’s included in the Kit: MIG/Multi Process Welder Dual Drive Wire Feed Unity (4 Roll) Interconnections 5m Trolley Water Cooler Hard Core Water Cooled MIG Torch 4m Feedrolls Regulator Gas Hose & Earth Lead Why we love the EVO MIG 350S Multi Process Separate Air Cooled Rugged, ergonomic design Water Cooled Package Advanced inverter technology with ARM and DSP digital microprocessor control Separate wire feed unit with ClearVision digital display and full parameter control ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment 2T/4T/Cycle and Spot trigger control Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable Excellent welding characteristics with enhanced droplet transfer Crater fill setting On demand cooling and auto sleep mode ensures market leading energy efficiency with idle power consumption of less than 10W Key power electronic component protection Standard MIG, Push Pull or Spool Gun torch selection Enhanced dual drive wire feeder with 37.45mm rollers Program memory storage (10 per process) Welding Engineers Mode for default parameter selection IP23S protection class rating Flexible remote control solutions including wired, wireless and mobile app control USB Type-C port for software updates and device charging Generator friendly *must have AVR  

Jasic EVO MIG 350S Multi Process Separate Air

Jasic EVO MIG 350S Multi Process Separate Air Cooled Built to perform in the most demanding environments, the Jasic EVO MIG 350S Separate combines rugged industrial design with advanced digital control for a truly professional welding experience. Powered by ARM and DSP dual microprocessors, the machine adapts in real time to deliver a smooth, stable arc with exceptional precision, no matter the process. The separate wire feed unit is engineered for efficiency, featuring a ClearVision HD digital display with rotary encoders for effortless adjustment of every parameter. Even in challenging workshop conditions, settings remain easy to see and quick to control. With synergic MIG/MAG, MMA, and DC Lift-TIG capabilities, the EVO MIG 350S offers complete versatility. The dual drive wire feeder with precision 37.45mm rollers ensures consistent wire delivery, while advanced features such as crater fill, program memory storage, and Welding Engineers Mode give you full command of every weld. Efficiency is built in. The Smart Fan system runs only when required, reducing noise and dust intake, while auto sleep mode lowers idle consumption to less than 10W. Generator-friendly operation and IP23S protection mean this machine is just as reliable on site as it is in the workshop. Connectivity is equally flexible, with options for wired, wireless, and mobile app control, plus a USB Type-C port for software updates and device charging. Backed by Jasic’s industry-leading 5-year warranty, the EVO MIG 350S delivers the performance, reliability, and confidence professionals demand. What’s included in the Kit: 4 roll feed unit Trolley MIG Torch 4m Interconnections 5m Regulator Gas Hose & Earth Lead 3m Storage Toolbox Why we love the EVO MIG 350S Multi Process Separate Air Cooled Rugged, ergonomic design  Advanced inverter technology with ARM and DSP digital microprocessor control  Separate wire feed unit with ClearVision digital display and full parameter control  ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment  2T/4T/Cycle and Spot trigger control  Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable  Excellent welding characteristics with enhanced droplet transfer  Crater fill setting  On demand cooling and auto sleep mode ensures market leading energy efficiency with idle power consumption of less than 10W  Key power electronic component protection  Standard MIG, Push Pull or Spool Gun torch selection  Enhanced dual drive wire feeder with 37.45mm rollers  Program memory storage (10 per process)  Welding Engineers Mode for default parameter selection  IP23S protection class rating  Flexible remote control solutions including wired, wireless and mobile app control  USB Type-C port for software updates and device charging  Generator friendly *must have AVR 

Jasic Evo MIG 350CT Inverter MIG Welder

Jasic EVO MIG 350 CT Inverter Welder The design of the Jasic EVO MIG 350 CT Inverter is both rugged and ergonomically designed for professionals who demand precision without compromise. The 350 CT is powered by an ARM and DSP dual microprocessor system that instantly adapts to every moment of the weld. It regulates the arc output in real-time, even as conditions change. The digital display is slanted at 45° for improved visibility and an enhanced viewing area. Visible under direct sunlight, offering a clear reading all the time. Intelligent Synergic Control is built in, making setup for welds easier. Enter some basic information, and the welder will take care of the rest, selecting the optimal settings every time. It also comes fitted with Overheat and Overcurrent protection, which protect the machine from overheating and from the current getting too high. The machine will automatically switch off and reset, protecting the machine and the weld. Designed with today’s workshop in mind, the EVO MIG 350 sets a new standard for efficiency. Its smart cooling system only runs when needed, and the auto sleep mode cuts power use down to under 10W when idle. You’re in full control wherever you are, thanks to flexible remote options – whether that’s wired, wireless, or through the mobile app. A USB-C port makes it easy to keep the machine updated and your devices charged, while built-in program memory and generator-ready operation mean the welder is just as reliable on site as it is in the workshop. What’s Included in the Kit: EVO MIG 350 CT Welder Trolley MIG Torch 4m Regulator Hose Earth Lead Why We Love the Jasic EVO MIG 350 CT Inverter Welder: Rugged, ergonomic design  Advanced inverter technology with ARM and DSP digital microprocessor control  ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment  2T/4T/Cycle and Spot trigger control  Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable  Excellent welding characteristics with enhanced droplet transfer  Crater fill setting  On-demand cooling and auto sleep mode ensure market-leading energy efficiency with idle power consumption of less than 10W Key power electronic component protection  Standard MIG, Push Pull or Spool Gun torch selection  Enhanced dual drive wire feeder with 37.45mm rollers  Program memory storage  Welding Engineers Mode for default parameter selection  IP23S protection class rating  Flexible remote control solutions including wired, wireless and mobile app control  USB Type-C port for software updates and device charging  Generator friendly *must have AVR   

Jasic EVO MIG 500S Air-Cooled MIG Welder Package With 5Mtr Intercons

Jasic EVO MIG 500S Multi Process Separate Air Cooled c/w 5m Interconnection Cable Transform your welding projects with the EVO MIG 500, a professional-grade industrial welding machine that delivers precision, power, and peace of mind in one rugged package. Whether you're tackling heavy industrial fabrication or intricate metalwork, this advanced welder adapts to your needs with its intelligent ARM and DSP digital microprocessor control, ensuring flawless welds every time.  The separate wire feed unit features a crystal-clear ClearVision HD digital display with intuitive rotary encoders, making parameter adjustments effortless even in demanding work environments. From synergic MIG/MAG to MMA and DC Lift-TIG capabilities, you'll switch between welding processes seamlessly while the enhanced dual drive wire feeder with precision 37.45mm rollers guarantees smooth, consistent wire delivery. Built to withstand the toughest job sites with IP23S protection and designed for maximum efficiency with less than 10W idle power consumption, the EVO MIG 500 Separate keeps your productivity high and operating costs low.  Control your welding experience your way—whether through wired, wireless, or mobile app connectivity—and rest easy knowing your investment is protected by an industry-leading 5-year warranty that speaks to the uncompromising quality and reliability built into every machine. Key Features Rugged, ergonomic design  Advanced inverter technology with ARM and DSP digital microprocessor control  Separate wire feed unit with ClearVision digital display and complete parameter control  ClearVision HD digital display with hollow rotary shaft encoders for easy and precise parameter adjustment  2T/4T/Cycle and Spot trigger control  Synergic/manual MIG/MAG, MMA & DC Lift-TIG capable  Excellent welding characteristics with enhanced droplet transfer  Crater fill setting  On-demand cooling and auto sleep mode ensure market-leading energy efficiency with idle power consumption of less than 10W  Key power electronic component protection  Standard MIG, Push Pull or Spool Gun torch selection  Enhanced dual drive wire feeder with 37.45mm rollers  Program memory storage (10 per process) Welding Engineers Mode for default parameter selection  IP23S protection class rating  Flexible remote control solutions, including wired, wireless and mobile app control  USB Type-C port for software updates and device charging  Generator friendly *must have AVR  Package Includes:  MIG/Multi Process Inverter Power Source Dual Drive Wire Feed Unit (4 Roll) Interconnections 5m Trolley Integrated Toolbox Hard Core MIG Torch 4m Feedrolls Regulator Gas Hose & Earth Lead

Jasic EVO MIG 500S Watercooled Seperate Wire Feeder MIG Welder Package

Jasic EVO MIG 500S Multi Process Separate Water Cooled Package - 5m Interconnecting Cable Transform your welding capabilities with the EVO MIG 500 Separate Water Cooled, a professional-grade welder engineered for those who demand precision and reliability in their craft. This powerhouse combines rugged durability with cutting-edge technology, featuring advanced inverter control powered by ARM and DSP digital microprocessors that deliver consistently superior welding performance across MIG/MAG, MMA, and DC Lift-TIG applications. Master Every Weld with Intelligent Control The separate wire feed unit equipped with ClearVision HD digital display puts total parameter control at your fingertips. Hollow rotary shaft encoders allow for precise adjustments, while the intuitive 2T/4T/Cycle and Spot trigger control adapts to your welding style. Whether you're working on delicate fabrication or heavy industrial projects, the synergic and manual modes ensure optimal droplet transfer and exceptional bead quality every time. Built for the Long Haul Water-cooled technology keeps your welding gun operating at peak performance during extended sessions, while the enhanced dual drive wire feeder with 37.45mm rollers handles even the most demanding materials with ease. The IP23S protection rating and key component protection safeguard your investment, backed by an industry-leading 5-year warranty for complete peace of mind. Efficiency That Works as Hard as You Do Smart features like on-demand cooling and auto sleep mode deliver market-leading energy efficiency, consuming less than 10W in idle mode—keeping your operating costs low without compromising performance. The Welding Engineers Mode provides instant access to proven parameter settings, while program memory storage saves your custom configurations for consistent results across multiple projects. Connected Control, Anywhere Take command with flexible remote control options including wired, wireless, and mobile app connectivity. The USB Type-C port enables seamless software updates and device charging, while generator-friendly operation (with AVR) ensures reliable performance wherever your work takes you. Package Includes:  MIG/Multi Process Inverter Power Source Dual Drive Wire Feed Unit (4 Roll) Interconnections 5m Trolley Water Cooler Hard Core Water Cooled MIG Torch 4m Feedrolls Regulator Gas Hose & Earth Lead

Jasic EVO TIG 320P AC/DC Water Cooled Package

Jasic EVO TIG 320P AC/DC Water Cooled Package The EVO TIG 320P AC/DC Water-Cooled redefines precision and versatility for welding professionals who demand the best. Whether you're tackling complex AC welding applications or seeking flawless results in DC modes, this state-of-the-art TIG welder is your ultimate companion. With its revolutionary multi and hybrid-wave control technology, you have unparalleled flexibility to handle any job with ease. Equipped with digital control, the EVO TIG 320P simplifies setup and operation, aided by its program memory storage that allows you to save your go-to settings for repeat jobs. Its ClearVision digital display and intuitive interface make navigating its features, like easy-set welding parameters and auto tungsten tip shaping, a seamless experience—even for intricate work. Meanwhile, the device's Dash-Arc technology ensures a virtually perfect arc strike rate of 99% or better. Versatility doesn’t stop there. The EVO TIG 320P supports MMA welding with advanced features like Hot Start, Anti-Stick, and Arc Force control, while the LC-40 Water Cooler ensures top-tier performance and reliability for extended projects. Its Smart Gas technology calculates optimal post-flow gas timing automatically, keeping costs and waste to a minimum. Flexible control options, including wired, wireless, and mobile app control, mean you’re always in command, no matter where the work takes you. Built with portability and efficiency in mind, the EVO TIG 320P comes with a robust trolley, intelligent fan and cooler control and auto sleep mode, delivering industry-leading energy savings. Plus, it’s an AVR generator-friendly for full compatibility in varied work environments. Every purchase is backed by a comprehensive 5-year warranty, guaranteeing peace of mind. From professional workshops to on-site applications, the EVO TIG 320P AC/DC offers unmatched precision, usability, and reliability to enhance your craftsmanship and workflow. Key Features TIG AC/DC Pulse with digital control Program memory storage Multi and hybrid-wave control technology offers ultimate flexibility for any AC welding application Microprocessor control of a wide range of functions HF and lift TIG VRD function Auto tungsten tip shaping simplifies tungsten preparation and ensures consistent AC arc start performance ClearVision digital display with hollow rotary shaft encoder Intelligent fan and cooler control Excellent welding characteristics AVR generator friendly 2T/4T/Cycle and Spot trigger control Dash-Arc technology – ensures 99+% arc striking success rate Smart Gas technology automatically calculates the optimum post-flow gas time MMA welding with Hot Start, Anti-Stick and Arc Force control Assisted spot welding mode Flexible remote control solutions, including wired, wireless and mobile app control Easy-Set – Simplifies welding parameter settings LC-40 Water cooler with enhanced usability and reliability Auto sleep mode with industry-leading energy efficiency Package Includes: EVO 320P AC/DC Inverter Water Cooler Trolley TIG Torch Earth Return Lead Gas Hose Regulator Flowmeter  

Jasic EVO TIG 320P AC/DC Package

Jasic EVO TIG 320P AC/DC Package The EVO TIG 320P AC/DC redefines precision and versatility for welding professionals who demand the best. Whether you're tackling complex AC welding applications or seeking flawless results in DC modes, this state-of-the-art TIG welder is your ultimate companion. With its revolutionary multi and hybrid-wave control technology, you have unparalleled flexibility to handle any job with ease. Equipped with digital control, the EVO TIG 320P simplifies setup and operation, aided by its program memory storage that allows you to save your go-to settings for repeat jobs. Its ClearVision digital display and intuitive interface make navigating its features, like easy-set welding parameters and auto tungsten tip shaping, a seamless experience—even for intricate work. Meanwhile, the device's Dash-Arc technology ensures a virtually perfect arc strike rate of 99% or better. Versatility doesn’t stop there. The EVO TIG 320P supports MMA welding with advanced features like Hot Start, Anti-Stick, and Arc Force control, while the optional LC-40 Water Cooler ensures top-tier performance and reliability for extended projects. Its Smart Gas technology calculates optimal post-flow gas timing automatically, keeping costs and waste to a minimum. Flexible control options, including wired, wireless, and mobile app control, mean you’re always in command, no matter where the work takes you. Built with efficiency in mind, the EVO TIG 320P comes with intelligent fan and cooler control and auto sleep mode, delivering industry-leading energy savings. Plus, it’s AVR generator friendly for full compatibility in varied work environments. Every purchase is backed by a comprehensive 5-year warranty, guaranteeing peace of mind. From professional workshops to on-site applications, the EVO TIG 320P AC/DC offers unmatched precision, usability, and reliability to enhance your craftsmanship and workflow. Package Includes: EVO 320P AC/DC Inverter,   TIG Torch, Earth Return Lead, Gas Hose, Regulator Flowmeter

Jasic EVO TIG 300P DC Water Cooled Package

Jasic EVO TIG 300P Water Cooled Welder Introducing the NEW Jasic ET-300P – the DC Pulse TIG inverter engineered for professionals who demand uncompromising performance, flexibility and reliability. Designed with the latest in advanced inverter technology, the ET-300P delivers industry-leading energy efficiency, precision arc control, and rugged durability that stands up to the toughest welding environments. The clear vision HD digital display ensures clear visibility in any light condition, so whether you're fabricating in the workshop or tackling site work, this welder is built to keep you going. The ET-300P offers total control and flexibility with modular air- and water-cooled options available. Choose the control that suits you, with wired and wireless foot pedals, handheld remotes and even mobile app connectivity available – putting the power of precision right at your fingertips.  With a rugged and ergonomic design and an IP23S-rated casing, its intelligently designed internal structure features dust-free air passages around critical components, backed with our industry-leading 5-year no-cost warranty – giving you peace of mind and performance you can trust. Built to weld. Designed to adapt. Backed to last. Discover more and be among the first to experience the future of TIG welding. Key Features TIG DC Pulse with digital control Program memory storage Microprocessor control of a wide range of functions HF and lift TIG VRD function ClearVision digital display with hollow rotary shaft encoder Intelligent fan and cooler control Excellent welding characteristic AVR generator friendly 2T/4T/Cycle and Spot trigger control Dash-Arc technology – ensures 99+% arc striking success rate Smart Gas technology automatically calculates the optimum post flow gas time MMA welding with Hot Start, Anti-Stick and Arc Force control Assisted spot welding mode Flexible remote control solutions including wired, wireless and mobile app control Easy-Set – Simplifies welding parameter settings LC-40 Water cooler with enhanced usability and reliability Auto sleep mode with industry-leading energy efficiency

Jasic EVO TIG 300P DC Package

Jasic EVO ET 300P Pulse TIG Inverter Introducing the NEW Jasic ET-300P – the DC Pulse TIG inverter engineered for professionals who demand uncompromising performance, flexibility and reliability. Designed with the latest in advanced inverter technology, the ET-300P delivers industry-leading energy efficiency, precision arc control, and rugged durability that stands up to the toughest welding environments. The clear vision HD digital display ensures clear visibility in any light condition, so whether you're fabricating in the workshop or tackling site work, this welder is built to keep you going. The ET-300P offers total control and flexibility with modular air- and water-cooled options available. Choose the control that suits you, with wired and wireless foot pedals, hand held remotes and even mobile app connectivity available – putting the power of precision right at your fingertips.  With a rugged and ergonomic design and a IP23S rated casing, Its intelligently designed internal structure features dust-free air passages around critical components, backed with our industry leading 5 year no cost warranty – giving you peace of mind and performance you can trust. Built to weld. Designed to adapt. Backed to last. Discover more and be among the first to experience the future of TIG welding.

Jasic Evo Cut 100 Plasma Inverter Package

Jasic EVO Cut 100 3-Phase Plasma Cutter Unleash powerful cutting precision with the Jasic EVO CUT 100 (3-phase) plasma inverter, the ultimate tool for professionals who demand consistency, reliability, and efficiency. Built with a rugged ergonomic design, this inverter is crafted to withstand challenging work environments while ensuring ease of use. Its ClearVision technology guarantees excellent visibility and control for the operator, while SurePlasma technology ensures consistent arc ignition performance, even when dealing with varying torch lengths. The EVO 100 offers features like mesh cutting, 2T/4T functionality, and non-HF arc ignition, making it versatile for complex tasks. Slice through the toughest materials with precision and ease using the EVO CUT 100 Inverter. Designed to deliver clean, professional cuts, it handles carbon steel effortlessly at 30mm with speeds of up to 400mm per minute. Need heavier-duty results? The machine makes severance cuts at 40mm and pieced cuts at 22mm, tackling even the most demanding projects with accuracy. Engineered for convenience, it boasts ABAP (Active Balancing Air Passage) to dissipate internal heat, fan-on-demand, and easy postflow time settings to ensure durability and efficiency. Compatible with AVR generators and equipped with overcurrent and overheat protection, it’s ready to tackle any job site or remote project. Need software updates on the go? The integrated USB Type-C port allows for seamless upgrades and on-device charging, while the 14-pin CNC interface enables precision-driven automation. Whether you're taking on heavy-duty industrial tasks or intricate cutting jobs, the optional integrated AP-150 compressor and inverter trolley make the EVO CUT 100 truly adaptable. It’s more than just a plasma cutter; it’s a cutting-edge solution tailored for professionals who value performance and innovation. Experience unparalleled reliability with the EVO 100 Inverter, a cutting solution built to exceed expectations. Engineered for durability and long-lasting performance, this inverter comes backed with a comprehensive 5-year warranty, giving you peace of mind for years to come. Package Includes: EVO CUT 100 Plasma Inverter UPH-125 Cutting Torch (6m) Earth Clamp & Lead (3m) Package does not include plug for CNC Key Features Rugged, ergonomic design ClearVision technology HF stabilising technology SurePlasma technology for consistent arc ignition performance with different torch lengths Mesh cutting, 2T/4T, non HF arc ignition and pilot arc Gas check, postflow time setting, cutting torch length setting Generator friendly Quick factory reset; auto sleep mode ABAP: Active Balancing Air Passage Fan on demand Key power electronic component protection Overcurrent and overheat protection USB Type-C port for software updates and device charging 14 Pin CNC interface Optional integrated compressor *** Can have an optional compressor tank which bolts to the bottom of the unit  - Please enquire for the pricing on this extra ***

Jasic Evo Cut 80 Plasma Inverter Package

Jasic EVO CUT 80 (3-Phase) Plasma Inverter Unleash powerful cutting precision with the Jasic EVO CUT 80 (3-phase) plasma inverter, the ultimate tool for professionals who demand consistency, reliability, and efficiency. Built with a rugged ergonomic design, this inverter is crafted to withstand challenging work environments while ensuring ease of use. Its ClearVision technology guarantees excellent control and visibility for the operator, while SurePlasma technology ensures consistent arc ignition performance, even when dealing with varying torch lengths. The EVO 80 offers features like mesh cutting, 2T/4T functionality, and non-HF arc ignition, making it versatile for complex tasks. Slice through the toughest materials with precision and ease using the EVO CUT 80 Inverter. Designed to deliver clean, professional cuts, it handles carbon steel effortlessly at 25mm with speeds of up to 400mm per minute. Need heavier-duty results? The machine makes severance cuts at 35mm and pieced cuts at 20mm, tackling even the most demanding projects with accuracy. Engineered for convenience, it boasts ABAP (Active Balancing Air Passage) to dissipate internal heat, fan-on-demand, and easy postflow time settings to ensure durability and efficiency. Compatible with AVR generators and equipped with overcurrent and overheat protection, it’s ready to tackle any job site or remote project. Need software updates on the go? The integrated USB Type-C port allows for seamless upgrades and on-device charging, while the 14-pin CNC interface enables precision-driven automation. Whether you're taking on heavy-duty industrial tasks or intricate cutting jobs, the optional integrated AP-140 compressor and inverter trolley feature makes the EVO 80 truly adaptable. It’s more than just a plasma cutter; it’s a cutting-edge solution tailored for professionals who value performance and innovation. Experience unparalleled reliability with the EVO CUT 80 Inverter, a cutting solution built to exceed expectations. Engineered for durability and long-lasting performance, this inverter comes backed with a comprehensive 5-year warranty, giving you peace of mind for years to come. Package Includes: EVO CUT 80 Plasma Inverter UPH-125 Cutting Torch (6m) Earth Clamp & Lead (3m) Key Features Rugged, ergonomic design ClearVision technology HF stabilising technology SurePlasma technology for consistent arc ignition performance with different torch lengths Mesh cutting, 2T/4T, non-HF arc ignition and pilot arc Gas check, postflow time setting, cutting torch length setting Generator friendly Quick factory reset; auto sleep mode ABAP: Active Balancing Air Passage Fan on demand Key power electronic component protection Overcurrent and overheat protection USB Type-C port for software updates and device charging 14 Pin CNC interface

ESAB Rogue EM 180 MIG Welder Package

ESAB Rogue EM 180 – Versatile & Portable MIG Welding System The ESAB Rogue EM 180 is an inverter-based MIG welding system designed to tackle a wide range of applications, from light fabrication to repair and maintenance. With industrial-grade arc performance and advanced controls, this machine allows welders to fine-tune arc characteristics for optimal results on various materials. Weighing only 16.2 kg and operating on a 230V single-phase input, the Rogue EM 180 is both highly portable and generator-compatible, making it ideal for workshop and on-site use. Key Features Large 14-Segment Display – Provides instant feedback on voltage and wire feed speed for easy monitoring. Synergic Weld Programs – Offers a full range of welding parameters (0.5 – 8.0 mm) with single-knob control for effortless adjustments. Power Factor Correction (PFC) – Ensures a stable arc, even when using long extension cables (up to 100m), and provides resistance to power fluctuations. Rugged Industrial Design – Built for durability with multiple lift points and integrated cable management. Arc Dynamics Control – Allows fine-tuning for different materials: a crisp/stiff arc for carbon steel or a smooth/soft arc for stainless steel. Spool Gun Ready – Automatically configures settings when a spool gun is connected for seamless operation. IP23S-Rated – Suitable for both indoor and outdoor use. What’s Included? MXL 201 MIG Torch (Euro connector, 3m) Earth return cable Electrode holder Gas hose with quick connector ESAB OK AristoRod 12.50 (0.8mm, 1kg) ESAB GoldRox Electrodes (2.5mm x 350mm, 1kg) Feed Rolls (0.6/0.8 mm V – fitted) Additional Feed Rolls (0.8/0.9 mm V & 0.8/0.9 mm VK) Safety instructions The ESAB Rogue EM 180 combines performance, portability, and ease of use, making it the perfect solution for professionals and hobbyists alike. Please note: This item is a special order item that needs to be ordered from the manufacturer.  

ArcStar 200 HBM Petrol Welder Generator Site Ready Package

  The ArcStar 200 HBM Petrol Welder is a high-performance, portable welding machine designed for professional welders who need reliability and power on the go. With its robust petrol engine and 200A welding output, this welder is perfect for outdoor and remote welding applications, delivering consistent and stable arc performance. Key Features: ✅ Powerful 200A Output: Delivers smooth and stable welding performance for a variety of applications.✅ Petrol Engine Driven: Provides independence from mains power, making it ideal for on-site and remote locations.✅ Dual Functionality: Acts as both a welder and a generator, offering added versatility on the job.✅ Durable & Portable: Built with a rugged frame and handles for easy transportation in tough environments.✅ Multi-Process Capability: Suitable for MMA (Stick) welding and compatible with a range of electrodes. Specifications: Model: ArcStar 200 HBM Welding Output: 200A Power Source: Petrol Engine Processes: MMA (Stick) Welding Portability: Compact and easy to transport The ArcStar 200 HBM Petrol Welder is the ideal solution for mobile welders, construction sites, and maintenance teams who need a reliable welding power source wherever they go.

Jasic EPT-200 200A DC TIG Welder Package 230V

Jasic EPT-200 CD TIG Welder The Jasic EVO POWER TIG 200 PFC (EPT-200) is a DC TIG welder that handles Steel, Stainless Steel, and Titanium. It's the entry-level TIG machine in the Jasic EVO range and works great if you need a solid DC TIG welder that runs off 230V (generators included). Don't let "entry-level" fool you though—it's still packed with loads of the same parameter controls you'll find on its bigger sibling, the EVO TIG 200 PFC. Like the rest of the upgraded EVO range (which replaced the much-loved PRO series), you get a large, easy-to-read control panel wrapped in a tough shell that looks the business. You can also add optional foot controls, including a wireless pedal, if you want that extra control and freedom while welding. The ClearVision screen is a high-def LED display set at just the right angle so you can see what's going on without any eye strain. Despite all this, the machine's surprisingly light and easy to lug around. Switching between MMA and TIG mode is dead simple—just one button press and you're sorted. Comes with everything you need to get started: 4m WP26 TIG torch, earth return lead, argon regulator, protective carry case, and gas hose. Key Features: Rugged, ergonomic design Dash-Arc Smart Lift TIG Full-featured DC TIG parameters ABAP: Active Balancing Air Passage Smart gas for optimised shielding gas consumption Fan on demand Voltage Reduction Device (VRD) Key power electronic component protection Overcurrent and overheat protection Complete with protective case and TIG leads

Jasic Evolve MIG 200P Multi-Purpose Pulse Inverter Welder MIG/TIG/ARC

EVOLVE 200 Multi Process Inverter Welder The EVOLVE 200 Multi Process Inverter is a next-generation, fully digital welding platform designed for modern fabrication environments where flexibility, control and future-proof technology matter. Ideally suited to light industrial fabrication, this powerful yet compact machine delivers outstanding MIG, TIG and MMA performance, backed by advanced digital control and cloud connectivity. At its core, the EVOLVE 200 features an ARM Cortex-M4 microprocessor with full digital HMI, enabling highly precise arc control across single and double pulse synergic MIG, high-frequency DC pulse TIG, and MMA welding modes. With over 100 synergic programs and 100 job memory slots, setup is fast and repeatable—simply select your material, wire size and gas, and the machine automatically optimises the parameters for consistent, high-quality welds. The integrated 4-roll wire feed system ensures smooth, reliable wire delivery, while the supplied Hard Core MIG torch with 4-button digital control allows real-time adjustment of welding parameters directly from the torch. Features such as inductance control, GLICK heat trim function, 2T/4T/Spot trigger modes and single or double pulse MIG provide exceptional control over heat input, arc behaviour and bead appearance—making it ideal for thin materials such as aluminium as well as more demanding steel applications. Designed with efficiency and longevity in mind, the EVOLVE 200 incorporates Active Balancing Air Passage (ABAP) cooling, fan-on-demand operation, IP23S protection and generator compatibility (AVR required). On-demand smart cooling reduces noise, energy consumption and internal contamination, helping extend machine life in workshop and site conditions. Connectivity sets the EVOLVE range apart. With built-in Wi-Fi and app control, users can adjust parameters remotely, manage multiple machines, and receive over-the-air firmware updates to keep the machine evolving alongside changing welding requirements. Optional accessories such as a foot control unit further expand capability, while the modular EVOLVE ecosystem supports future expansion. Powerful, intelligent and built to adapt, the EVOLVE 200 delivers professional multi-process welding performance with the digital control and connectivity demanded by today’s fabrication industry. Key Features Single and double pulse synergic MIG High frequency LIFT DC pulse TIG Hard Core MIG Torch with 4-button digital control MMA mode 4 roll wire feeder Wi-Fi-enabled firmware updates App control Digital control MIG torch 100+ synergic programs 100 job memory storage 2T/4T Spot trigger control IP23S On-demand cooling ABAP: Active Balancing Air Passage Fan on demand Ideally suited for light industrial fabrication work Generator friendly * must have AVR

Jasic JM272S Separate Wire Feed Inverter MIG Welder Package - Water Cooled

Jasic MIG 272 Separate Inverter Welder - Water Cooled The Jasic MIG 272S Separate Inverter Welder represents the pinnacle of welding technology, offering a powerful, versatile solution for professionals seeking superior welding performance. Part of the esteemed Jasic 270 series, this machine is distinguished by its advanced IGBT welding components, designed to handle demanding and repetitive welding cycles with unparalleled reliability and efficiency. At the heart of the Jasic MIG 272S is state-of-the-art control circuitry complemented by a digital A/V display. This feature allows welders to monitor and adjust welding parameters precisely, ensuring optimal control over the welding process and enabling superior weld quality and consistency. This modular package boasts excellent welding characteristics and demonstrates an impressive duty cycle of 270A at 30%, running off a single-phase 230V input. This high-duty cycle increases productivity, allowing longer welding periods with less downtime. It is ideal for workshops, fabrication sites, and industrial applications where efficiency and reliability are paramount. The Jasic MIG 272S's versatility is evident in its ability to work with various wire sizes and types. It can smoothly handle solid steel wires up to 7.9mm, stainless steel solid wires up to 9.5mm, and aluminium solid wires up to 9.5mm. Furthermore, it can use flux-cored steel wire up to 6.4mm, offering a comprehensive range of welding solutions for different materials and thicknesses. This comprehensive package includes the MIG inverter machine power source, a robust 4-roll wire feed unit for consistent wire feeding, a 5-metre interconnecting cable for flexibility in setup, a high-quality MIG welding torch, a work return lead and clamp, and a gas hose with regulator for complete setup out of the box. The Jasic MIG 272S Separate Inverter Welder embodies advanced welding technology, offering unmatched performance, versatility, and reliability. Whether for industrial fabrication, automotive repairs, or construction projects, this machine is engineered to meet the highest standards of professional welding. Key Features: Single Phase IGBT MIG inverter welder High-powered 230V welding machine Digital amp and volt meters 4 Roll wire feed unit High duty cycle - single-phase inverter Advanced control circuitry Suitable for 0.6/0.8/1.0 and 1.2mm wires Burn back control & wire inching 2T/4T trigger function Power & status LED's Gas check function Variable inductance Inverter trolley takes a full-size gas cylinder AVR generator friendly  What is included in this package? MIG inverter machine power source 4 roll wire feed unit 5 metre interconnecting cable Water-cooled MIG welding torch Work return lead and clamp Gas hose and regulator.  Water Cooler Tank  

ESAB Renegade VOLT ES 200i Dewalt Battery Powered Arc Stick Welder

ESAB Renegade VOLT ES 200i Battery Powered Welder The ESAB Renegade VOLT™ ES 200i is a true game-changer for welders who need power on the go. This compact, cordless Stick (SMAW) and Live TIG (GTAW) welder can run on battery, mains power, or a clever AMP+ Hybrid Mode — giving you total flexibility wherever the job takes you. Powered by DEWALT® FLEXVOLT® batteries (6 Ah, 9 Ah, or 12 Ah), the Renegade VOLT delivers serious performance. With four 12 Ah batteries, you can burn through up to 33 E6013 electrodes on a single charge, and those batteries come included.* Whether you’re working offsite, in a remote location, or somewhere mains power is limited, this machine is built to keep up. In AMP+ Hybrid Mode, it combines mains and battery power, which helps stop smaller breakers (like 10A or 16A) from tripping — and gives you an extra boost when running on 120V input.   The Renegade VOLT isn’t just powerful — it’s designed to take a beating. It features a tough, impact-resistant housing and multiple lift points, making it easy to move around the site. The bright, full-colour display is made for outdoor use, even in direct sunlight, and gives you useful info like battery status and estimated arc time at a glance.   Performance-wise, it delivers a smooth, stable arc with handy functions such as hot start, arc force, memory storage, and a dedicated cellulosic mode (6010), letting you fine-tune settings to suit the job. *Based on standard operating conditions. Features: 200 A output on AC mains (230V) Up to 140 A output on battery power Includes (4) DEWALT FLEXVOLT 20V/60V max 12 Ah batteries AMP+ Hybrid Mode for extra power Lightweight and portable battery powered welder Durable, impact-resistant housing Sun-friendly, intuitive user interface Memory storage for welding parameters Industries:  Agricultural Equipment Civil Construction Food and Beverage Marine and Offshore Mining Power Generation Repair and Maintenance Railcars Ship and Offshore Yards Transportation Processes:  SMAW/MMA (Stick) GTAW (TIG) Please note: This item is a special order item that needs to be ordered from the manufacturer.

EWM Picotig 220 Puls DC 5P TIG Welder Power Source Only

EWM Picotig 220 Puls DC 5P Power Source Only  TIG DC inverter welding machine, portable, gas-cooled, 5-pole, with PFC module High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology TIG DC and TIG pulse Non-latched/latched operation spotmatic and spotArc® MMA, MMA pulse, MMA cel, MMA cel pulse Robust housing with impact-resistant plastic cover 5-pole, digital welding torch connection with X technology allows users to connect Retox XQ welding torches Comfort 3.0 mini control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters Splash-proof in line with IP23 Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed Generator-compatible, even with long mains leads High mains voltage tolerance Consumables box in the handle – consumables always safely stored and within reach Cable holder for holding mains cable as standard Protective cap provided as standard protects the control against water, dirt and impact Adjustable hot start current and hot start time Adjustable Arcforce Antistick function Energy-saving thanks to high efficiency and standby function 3.5 m mains supply lead with 16 A shock-proof plug Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

EWM Picomig 220 Synergic TKG 230V MIG Welder Ready To Weld Package

EWM Picomig 220 Synergic TKG 230V MIG Welder Package Multiprocess MIG/MAG welding machine, compact, portable, Euro torch connector, with PFC module, for 5 kg D200 spools High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology Welding procedures and functions GMAW standard welding Characteristics for steel, CrNi, CuSi, aluminium and flux cored wires MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time Your benefits Portable, compact No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Robust casing suitable for construction site use High open circuit voltage for excellent ignition characteristics 4-roll drive Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Insulated wire space 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

EWM Picomig 225 Synergic TKG 230V MIG Welder Package

EWM Picomig 225 Synergic TKG 230V MIG Welder  Multi-process MIG/MAG synergic welding machine, compact, portable, Euro torch connector, with PFC module, for 15 kg D300 spools High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology Welding procedures and functions Characteristics for steel, CrNi, CuSi, aluminium and flux cored wire MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time Your benefits No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Portable or can be carried on a trolley High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires High open circuit voltage for excellent ignition characteristics Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Insulated wire space Delivery includes practical torch holder 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

EWM Picomig 225 Puls TKG 230V Pulse MIG Welder Package

EWM Picomig 225 Puls TKG 230V Pulse MIG Welder  Multi-process MIG/MAG pulse welding machine, compact, portable, Euro torch connector, with PFC module, for 15 kg D300 spools High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology Welding procedures and functions GMAW pulsed welding and GMAW standard welding Significantly less spatter formation and therefore less finishing work, all thanks to the pulse function GMAW pulse welding of aluminium and aluminium alloys Characteristics for steel, CrNi, CuSi, aluminium and flux cored wire MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time Your benefits No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Portable or can be carried on a trolley High-precision, powerful EWM eFeed 4-roll wire feed mechanism for secure feeding of all solid and flux cored wires High open circuit voltage for excellent ignition characteristics Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Insulated wire space Delivery includes practical torch holder 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

EWM Tetrix XQ 230 Puls AC/DC TIG 5P With Expert 3.0 Control Panel Package Builder

EWM Tetrix XQ 230 Puls AC/DC TIG 5P With Expert 3.0 Control Panel Package Builder This highly efficient TIG welder has standby functionality and is the latest generation EWM TIG AC/DC inverter machine, it features TIG AC, TIG DC and TIG pulse, MMA welding, MMA pulse welding, MMA Cel and MMA Cel Pulse. This is a modular machine which is capable of TIG AC/DC and TIG pulse, MMA welding and MMA Cel Pulse. It also has ActivArc and Spotarc technology.  Use the package uilder to spec your machine to your exact requirements   TIG Welding: Temperature and speed controlled fan for cooling which reduces contamination and noise emissions because the fan only is on when required. Remote control and function torch connection compatibility. Simple and tool free welding polarity reversal. IP23 splash proof standards. Robust case. Why we love the Tetrix XQ230 Puls AC/DC: Flexfit case system allows accessories and parts to be added using standard slot nuts. Expert 3.0 control with 7 inch screen- easy to see and use. LED information bar to show current status.  Optional connection to network through Wifi or LAN. High capacity cooling system using the 1500 W high performance centrifugal pump with 8 litre coolant tank- this saves money on consumable costs.  High mains voltage tolerance. Generator compatible. Consumables box in the handle. Description: Modular AC/DC TIG inverter welding machine of the latest generation TIG AC/DC, TIG DC and TIG pulse activArc® and spotArc® MMA, MMA pulse, MMA cel, MMA cel pulse Machine configuration ex works: Tetrix XQ 230 puls AC/DC with Comfort 3.0 DC machine control, 3.5 m mains cable including mains plug and 5-pole connection socket compatible with EWM X technology Tried-and-tested Comfort 3.0 control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters Robust housing with impact-resistant plastic cover Provided ex works ready for water block connection – guarantees ultimate flexibility in industry and trade Splash-proof in line with IP23 Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed Generator-compatible, even with long mains leads High mains voltage tolerance Consumables box in the handle – consumables always safely stored and within reach LED status bar indicates the current operating status with colours Optional network connectivity with ewm Xnet software via LAN or WiFi gateway 3.5 m mains lead with 16 A earthed plug Controls: Popular, praised and simply indispensable 7" Digital Screen  Five favourites buttons Click wheel for convenient use with welder’s gloves Reliable push-button operation Direct access to all main functions All parameters at a glance AC and DC versions available   Welding process DC TIG   TIG AC   MMA DC   MMA AC   E-Hand cel Operating modes Non-latched 2T   Latched 4T   spotArc   spotmatic AC functions AC tungsten balling   AC sine   AC trapezoidal   AC rectangle   AC balance   AC amplitude balance   AC frequency: 30 Hz to 300 Hz   Automatic AC frequency   AC commutation optimisation for highest arc stability Ignition options HF   Liftarc Pulse type Average value pulsing (0.2 Hz–20 kHz) incl. waveform setting (soft, middle, hard)   Thermal pulsing (time pulsing)   AC special MMA functions Hotstart   Arcforce   Antistick   Average value pulse welding Functions activArc   Automatic gas post-flow function   Cable resistance alignment Job functions Number of freely definable Jobs 100 TIG, 8 MMA, 8 MMA Cel

EWM Picomig 220 Puls TKG 230V Pulse MIG Welder Package

EWM Picomig 220 Pulse MIG Welder Why we love the EWM Picomig 220 Puls TKG MIG Welder Multiprocess MIG/MAG pulse welding machine, compact, portable, Euro torch connector, with PFC module, for 5 kg D200 spools High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology Welding procedures and functions GMAW pulsed welding and GMAW standard welding Significantly less spatter formation and therefore less finishing work, all thanks to the pulse function GMAW pulse welding of aluminium and aluminium alloys Characteristics for steel, CrNi, CuSi, aluminium and flux cored wires MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Robust casing suitable for construction site use High open circuit voltage for excellent ignition characteristics 4-roll drive Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Insulated wire space 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage  

Jasic Evo EM160C PFC Compact Inverter MIG Welder Package

Jasic EVO MIG 160 PFC Compact Inverter Introducing the Jasic EVO MIG 160 PFC Compact Inverter, which comes with a comprehensive 5-year warranty and delivers professional-grade welding performance with reliability you can trust. This package includes essential components: the Inverter Power Source, a 3-meter MIG Torch, a 3-meter Earth Cable and clamp, an Argon Regulator, and a Gas Hose, ensuring you have everything you need to get started right away. Designed for durability and ease of use, the Jasic EVO MIG 160 boasts a rugged, ergonomic design that enhances operational comfort and efficiency. Equipped with Clearvision Technology, welders can enjoy enhanced visibility, promoting precision and accuracy in their work. Experience intelligent welding with the integrated Synergic Control, which automatically adjusts parameters for optimal performance, streamlining the welding process. Thanks to its adaptable wide voltage range, this inverter easily caters to various welding needs. The inclusion of Welding Engineer Mode and Smart Lift TIG functionality further extends this machine's versatility, allowing for precise control and customization to suit specific welding tasks. Expect consistent and efficient MIG spot welding performance, ensuring high-quality welds every time. For added convenience, flexible remote control solutions are available as an optional feature, enhancing usability and adaptability. Featuring Power Factor Correction (PFC) and generator-friendly design, the Jasic EVO MIG 160 operates efficiently while minimizing energy consumption, making it an environmentally conscious choice. Quick factory reset capability and ultra-efficient auto sleep mode enhance operational efficiency, while compatibility with MIG digital torches and spool guns ensures versatility and adaptability to evolving welding needs. LED lighting inside the wire feeder cabinet, Active Balancing Air Passage (ABAP), and Fan-on-Demand cooling create a comfortable and productive working environment. Safety is paramount, and this inverter is equipped with a Voltage Reduction Device (VRD), key power component protection, and overcurrent and overheat protection, ensuring a secure and reliable welding experience. Elevate your welding capabilities with the Jasic EVO MIG 160 PFC Compact Inverter, a professional-grade solution designed to meet the demands of modern welding applications. Key Features: Rugged, ergonomic design Clearvision Technology Intelligent Synergic COntrol Adaptable wide voltage Welding engineer mode Smart lift TIG Consistent & efficient MIG spot welding  performance Flexible remote control solutions(optional) Power factor correction(PFC) Generator friendly Quick factory reset  Ultra efficient auto sleep mode Compatible with MIG digital torch & spool guns LED inside wire feeder cabinet ABAP- active balancing air passage Fan on demand cooling Voltage reduction device (VRD) Key power component protection Overcurrent & overheat protection

Kemppi Master M 205 Pulse MIG Watercooled MIG Welder Package With 3.5Mtr

Kemppi Master M 205 Water-cooled welder The Master M 205 sets new standards for power and performance in a portable MIG welding machine. With a portable, lightweight design that's easy to carry, you'll enjoy having a portable MIG welder that can be moved wherever you need it. If you're working in tight spaces, the 5" LCD screen is bright and easy to read, while self-charging LED lights can be turned on to improve safety. They work with or without mains power. The Master M 205 is also easy to use. Both portable MIG welding machines come with Weld Assist, which automatically sets parameters to help you start welding quickly. It's a simple solution that welders can also use with minimal experience. Just select the material thickness, joint type, and welding position, then start welding. The Master M 205 is a portable pulse MIG welder with 200 amps of power at a 40% duty cycle. Take on a wider range of materials with pulse welding and do your best work anywhere with the convenience of a 1-phase power supply. Save time and take welding to the next level with 37 built-in MIG/MAG welding programs for Fe, Ss, AlMg5, AlSi5, CuSi3, and CuAl8 filler materials. The Master M 205 comes with 17 pulse-MIG programs and 20 1-MIG programs. If you're looking for a portable MIG welder that can complete high-quality welds in challenging environments, the Master M 205 should be on top of your list. Key Features Versatile process selection with premium MIG/MAG, DC TIG, and stick welding options Master M 205 includes a pulse MIG welding option with a 1-phase power supply Lightweight and portable welders that are easy to carry anywhere Ideal for tight workspaces Master M 205: 17 pulse MIG welding programs and 20 1-MIG welding programs as a standard Self-charging LED work lights for better worksite safety Designed to be lifted with a crane Weld Assist feature for fast parameter setting 6 memory channels 40% duty cycle Compatible with a generator Multivoltage as a standard feature Alternative transport cart options  

Kemppi Master M 205 Pulse Air Cooled MIG Welder With 5Mtr MIG Torch

Why we love the Kemppi Master M 205 Pulse MIG Welder The Master M 205 sets new standards for power and performance in a portable MIG welding machine. With a portable, lightweight design that's easy to carry, you'll enjoy having a portable MIG welder that can be moved wherever you need it. If you're working in tight spaces, the 5" LCD screen is bright and easy to read, while self-charging LED lights can be turned on to improve safety. They work with or without mains power. The Master M 205 is also easy to use. These portable MIG welding machines come with Weld Assist, which automatically sets parameters to help you start welding quickly. It's a simple solution that welders can also use with minimal experience. Just select the material thickness, joint type, and welding position, and start welding. The Master M 205 is a portable pulse MIG welder with 200 amps of power at a 40% duty cycle. Take on a wider range of materials with pulse welding and do your best work anywhere with the convenience of a 1-phase power supply. Save time and take welding to the next level with 37 built-in MIG/MAG welding programs for Fe, Ss, AlMg5, AlSi5, CuSi3, and CuAl8 filler materials. The Master M 205 comes with 17 pulse-MIG programs and 20 1-MIG programs. If you're looking for a portable MIG welder that can complete high-quality welds in challenging environments, the Master M 205 should be at the top of your list Key Features Versatile process selection with premium MIG/MAG, DC TIG, and stick welding options Master M 205 includes a pulse MIG welding option with a 1-phase power supply Lightweight and portable welders that are easy to carry anywhere Ideal for tight workspaces Master M 205: 17 pulse MIG welding programs and 20 1-MIG welding programs as a standard Root pass welding, thin sheet welding, and gap bridging with MAX Cool arc welding process as a standard in Master M 323 Self-charging LED work lights for better worksite safety Designed to be lifted with a crane Weld Assist feature for fast parameter setting 6 memory channels 40 % duty cycle Compatible with a generator Multivoltage as a standard feature Alternative transport cart options Kit Includes: Kemppi Master M 205 Pulse MIG Welder Kemppi Flexlite GXe305G MIG Torch ***Please Note Feed Rollers Need To Be Ordered Separately ***

Jasic EVO TIG AC/DC ET200P PFC Water Cooled TIG Package 110/230V

Why we love the Jasic EVO 2.0 AC/DC TIG 200P Water-cooled Package 110/230V The Evo TIG 200P AC/DC inverter welding machine represents a pinnacle of welding technology. It is designed to deliver exceptional performance and user experience in a durable and robust package suitable for various welding applications. This advanced machine incorporates cutting-edge technology to enhance welding capabilities and operator comfort, making it an indispensable tool for professionals and enthusiasts. One of the key features of the Evo TIG 200P AC/DC is its unique electrical structure and air passage design, which significantly improves the duty cycle and reliability of the equipment. This innovation ensures consistent performance even during demanding welding tasks, reducing downtime and enhancing productivity for the operator. The ClearVision display on the Evo TIG 200P AC/DC provides clear and informative data for the welding processes, offering operators real-time feedback and control over welding parameters. An optional TFT-LCD version is also available, providing enhanced visibility and additional functionality for precise adjustments.   Key Features of the Evo TIG 200P AC/DC Inverter Welding Machine: Rugged, Ergonomic Design: Built to withstand tough working conditions, ensuring durability and ease of use. ClearVision Technology: Provides operators with clear and informative data on welding processes for optimal control and precision. Adaptable Wide Voltage Range: Compatible with various power supply conditions, ensuring stable performance. HF Stabilising Technology: Ensures consistent high-frequency arc starting for reliable weld initiation. Dash-Arc: Enhances arc stability and control, facilitating smooth and clean welds. Smart Lift TIG: Enables easy and efficient TIG arc starting without high-frequency ignition. Full-Featured Pulse TIG Parameters: Allows precise control over pulse frequency, pulse duty cycle, and other parameters for tailored welding. Multiple AC Waveforms: Supports various AC waveforms for welding aluminium and other non-ferrous metals. Mixed Waveform, Mixed Waveform Frequency, Mixed Waveform Duty Cycle: Offers advanced waveform options for versatile welding applications. Flexible Remote Control Solutions (Optional): Provides additional control options for enhanced flexibility and convenience. Power Factor Correction (PFC), Generator Friendly: Energy-efficient design compatible with different power sources. Quick Factory Reset; Auto Sleep Mode: Enhances user convenience and energy savings during idle periods. Water-Cooled Option Available: Allows extended welding sessions with optimal cooling for the torch and equipment. ABAP (Active Balancing Air Passage): Optimizes air flow to improve machine performance and reliability. Smart Gas for Optimized Shielding Gas Consumption: Reduces gas consumption while maintaining optimal shielding gas coverage. On-Demand Fan: Ensures efficient cooling and reduces noise levels, enhancing overall user experience. Voltage Reduction Device (VRD): Enhances safety by reducing the open-circuit voltage when the welding machine is not in use. Key Power Electronic Component Protection: Safeguards critical components for long-term reliability and performance. Overcurrent and Overheat Protection: Protects the machine from potential damage due to excessive current or heat. TFT Screen (Optional): Provides enhanced visibility and user interface for intuitive operation and control.   Overall, the Evo TIG 200P AC/DC inverter welding machine combines advanced technology with ergonomic design and comprehensive features to deliver exceptional welding performance and user satisfaction. Whether used in industrial settings, fabrication workshops, or automotive repair environments, this machine offers versatility, reliability, and precision for various welding applications.

Jasic Cut 45 EVO Plasma Cutter PFC 110/230V

Jasic EVO Cut 45 PFC Inverter Plasma Cutter Designed to be both rugged and ergonomic, the EVO Cut 45 PFC Plasma cutter is packed with features, including Jasic's ClearVision technology, which improves visibility. The HD digital panel, angled at 45°, delivers crisp, clear readings, even in direct sunlight. The streamlined handle not only enhances the machine's overall aesthetic but also provides a comfortable, firm, and glove-friendly grip for easy carrying. Advanced SurePlasma technology ensures consistent plasma arc ignition for non-high-frequency cutting applications. It also comes with a choice of cutting modes, 2T/4T latch or mesh cutting and pilot arc, as well as non-HF arc ignition. Mesh mode eliminates the need to repeatedly press the torch trigger, making cutting much easier. The Jasic EVO Cut 45 can clean cut up to 15mm in carbon steel and severance cut up to 25mm. This is based on running a 230V supply; reduced cutting thicknesses are achievable off a 115V supply. What’s included in the kit: EVO Cut 45 PFC Inverter Plasma Cutting Torch 6m Earth Return Lead 3m Why We Love The Jasic EVO Cut 45 PFC Inverter Rugged, ergonomic design ClearVision technology Adaptable wide voltage 110/230V HF stabilising technology SurePlasma technology for consistent arc ignition performance with different torch lengths Mesh cutting, 2T/4T non HF arc ignition & pilot arc Gas check, postflow time setting, cutting torch length setting Power factor correction(PFC), generator friendly Quick factory reset & Auto sleep mode ABAP - Active balancing air passage Fan-on-demand cooling Key power electric component protection Overcurrent & overheat protection TFT screen(optional upgrade)  

Jasic EVO EM200CT PFC 110/230V MIG Welder Package With Trolley

Jasic EVO 2.0 200PFC 110/230V MIG Welder With Trolley Package The Jasic EVO MIG 200CT is built for serious welders who want industrial performance in a rugged, easy-to-use package. With a tough ergonomic design, advanced digital controls and an impressive range of intelligent features, this compact MIG welder delivers outstanding results across fabrication, automotive, agricultural and on-site work. Featuring ClearVision HD digital display technology and a 45° slanted control panel, the 200CT offers exceptional visibility—even in bright workshop lighting—making setup quicker and more accurate. Its intelligent synergic control selects the ideal welding parameters automatically: simply choose your wire type, wire size, gas and material thickness, and you’re ready to weld. Built to perform in demanding environments, the unit includes Power Factor Correction (PFC) for generator-friendly operation, wide voltage adaptability (95–265V), and Active Balancing Air Passage (ABAP) cooling for improved reliability. Inside the wire-feed cabinet, you’ll find LED convenience lighting and a handy feed roll storage slot, with spool-gun compatibility for fast aluminium changeovers. Extra features like Smart Lift TIG, advanced MMA functions, VRD safety, fan-on-demand, overheat/overcurrent protection, and a quick factory reset make this a truly versatile multi-process machine. Optional remote controls, digital torches and TFT screens further enhance usability for professional fabricators who want total control at their fingertips. Whether you're tackling precision fabrication or consistent spot welding, the Jasic EVO MIG 200CT is engineered to deliver reliability, flexibility and exceptional weld quality—every time. Key Features ClearVision technology Intelligent synergic control Adaptable wide input voltage range Welding engineer mode Smart DC lift TIG Consistent and efficient MIG spot welding performance. Flexible remote control solutions. Generator friendly. Auto sleep mode for improved energy efficiency. Compatible with digital control MIG torch, as well as spool gun. LED light inside wire feed cabinet for improved vision. Fan cooling on demand. Voltage reduction device(VDR) Ovecurrent and overheat protection

Jasic EVO EA200 PFC MMA (Stick) Welder 110/230V

Why we love the Jasic EVO 2.0 200PFC ARC/MMA Welder  Introducing the Evo Arc 200, a cutting-edge digital inverter DC manual welder renowned for its exceptional performance. The Jasic EVO ARC 200 PFC is the uprated version of the popular Jasic PRO ARC series, featuring a new large-format display that is clear to see from a distance, as well as a heavier-duty, more rugged shell casing with aggressive looks. Crafted with advanced technology, this resilient machine caters to a diverse array of applications, making it indispensable for precise welding across various materials. The Evo Arc 200 enhances the machine's duty cycle by boasting a unique electrical structure and air passage design, significantly elevating its reliability. Moreover, incorporating the ClearVision display provides operators with comprehensive and informative data, enhancing the welding process experience. Experience unparalleled welding proficiency with the Evo Arc 200, where innovation meets durability for seamless welding operations across various materials. ClearVision technology Adaptable wide input voltage range Flexible remote control solutions. Smart DC lift TIG. Anti stick, adjustable hot start and arc force. Generator friendly. Auto sleep mode for improved energy efficiency. Fan on demand. Voltage reduction device for improved safety. Overcurrent and overheat protection. Supplied with a durable protective case and MMA lead set with twist type electrode holder. Runs from 110 and 230V power supplies Latest Features Following extensive research and development, the EVO Arc 200 PFC (EA-200) Inverter Welder emerges with various innovative features. Among its highlights is the Intelligent Synergic Control, which facilitates hassle-free operation and setup through pre-programmed electrode size settings. Users benefit from a convenient selection option for electrode sizes, streamlining the welding process. The inclusion of Smart Lift TIG technology ensures precise control of short circuit current at ignition, effectively preventing tungsten contamination. Additionally, the system swiftly detects accidental short circuits, ensuring uninterrupted welding operations. The arc length cut-off feature eliminates undesirable arc wandering, enhancing welding precision. Efficiency is further enhanced with a sleep function designed to conserve power during idle periods. Upon activation with a simple push of a button, the machine swiftly reawakens, primed for the next welding task. Additionally, a fan-on-demand mechanism optimises working temperature by activating when necessary and deactivating when idle, reducing energy consumption and noise emissions. Integrating a voltage reduction device (VRD) in the Jasic EVO Arc 200 PFC (EA-200) remains paramount for safety. This device mitigates potential hazards by lowering the open circuit voltage (OCV) to a safer level, thus minimising risks associated with accidental contact with the welding holder or electrode during machine operation. Furthermore, built-in overcurrent and overheat protection mechanisms safeguard the machine from potential damage, ensuring prolonged reliability and performance. The Jasic EVO Arc 200 PFC (EA-200) is a testament to safety and efficiency, offering a comprehensive solution for welding tasks with unmatched precision and reliability.

Jasic EVO Arc 160 PFC MMA (Stick) Welder 110/230V

Jasic EVO ARC 160 Inverter Welding Machine The Jasic EVO ARC 160 PFC (EA-160) is basically the beefed-up version of the wildly popular Jasic PRO Arc series. It's got a big new display that you can actually read from across the room, plus a tougher shell that looks pretty mean too. These EVO ARC machines come with PFC built in, which helps save on energy costs. They're also smart enough to work out what voltage you've got—plug them into either 110V or 230V, and they'll even run off generators. What's really handy is they'll handle anything from 96V right up to 265V, so you can use long extension leads without worrying about voltage drop causing problems. The ClearVision screen is a nice touch—it's a high-def LED display angled so you can see it properly without straining your neck. Despite all these features, the machine's surprisingly light and easy to move around. You can flip between MMA mode and Smart Lift TIG mode with just one button. Comes with a solid protective case and MMA lead included. Why we love the Jasic EVO 2.0 160 PFC Arc/MMA Welder ClearVision technology Adaptable wide input voltage range Flexible remote control solutions. Smart DC lift TIG. Anti stick, adjustable hot start and arc force. Generator friendly. Auto sleep mode for greater energy efficiency. Fan cooling on demand Voltage reduction device(VDR) for improved safety. Overcurrent and overheat protection.

Jasic EVO AC/DC ET200P PFC 110/230V Pulse TIG Welder

Jasic EVO 2.0 AC/DC TIG200P Air Cooled Welder – Precision, Performance, and Versatility The Jasic EVO 2.0 AC/DC TIG200P Air Cooled Welder delivers professional-grade welding performance with unmatched precision and flexibility. Engineered for both AC and DC TIG applications, this welder is ideal for aluminium, stainless steel, mild steel, and other metals, making it perfect for fabrication, maintenance, and professional workshop use. Equipped with ClearVision technology and intelligent synergic control, setup and welding have never been easier. The welder offers multiple AC waveforms, mixed waveform frequency and duty cycle control, and a Welding Engineer Mode for in-depth parameter adjustments. Smart features like optimized gas consumption, generator compatibility, and auto sleep mode ensure efficiency, while fan-on-demand reduces energy use and noise. Safety and durability are at the core, with a Voltage Reduction Device (VRD), overcurrent and overheat protection. The EVO 2.0 also supports optional upgrades like a TFT digital screen and flexible remote control solutions. Backed by a 5-year warranty, the Jasic EVO 2.0 TIG200P offers reliable, high-quality welding performance you can count on every time. Key Features 5 Year Warranty ClearVision technology Intelligent synergic control Adaptable wide input voltage range Welding engineer mode: Allows access to the sub-menu to change more in-depth parameters. Multiple AC waveforms available Mixed waveform, mixed waveform frequency & mixed waveform duty cycle. Smart gas for optimised shielding gas consumption. Flexible remote control solutions. Generator friendly. Auto sleep mode for improved energy efficiency. Fan on demand. Voltage reduction device (VRD) Overcurrent and overheat protection. An optional TFT screen is available as an upgrade 

Jasic EVO EM250 PFC MIG Welder Package On Trolley 110/230V

Jasic EVO MIG 250 CT Inverter Welder The EVO MIG 250 CT from Jasic features a rugged and ergonomic design that not only looks the part but is designed to make welding more efficient and straightforward, from its slanted control panel, which provides enhanced visibility with ClearVision technology offering a crisp and clear reading even in direct sunlight to the sloped front grill that provides a perfect balance between heat dissipation and ingress protection. The built-in Intelligent Synergic Control enables you to set up your welder faster than ever before. With built-in synergic programs, all you have to do is input some basic information, and the machine does the rest for you, picking the optimal settings for your weld. Whether you are MIG, TIG or MMA welding, the Jasic EVO MIG 250 CT PFC Inverter has you covered with a High arc ignition response rate for excellent consistency, delivering 60+ manual weld spots per minute for ultimate MIG spot welding performance. The trigger-controlled DC Lift Arc ignition enables the arc to be started easily by touching the tungsten to the workpiece and lifting it back up. This stops the tungsten from sticking to the workpiece and breaking the tip. It also features Anti-Stick technology, Arc Force, and Hot Start functionalities designed to improve weld quality and ease of use whilst MMA welding. Not only is it designed to streamline welding, but it is also designed to be energy-efficient, with features such as auto-sleep mode and an energy-saving smart fan, both of which are designed to save power and reduce energy costs. The Jasic EVO MIG 250 CT PFC Inverter welder has you covered, offering a wide range of features and technical specifications. Have a look at the list below to find out more. What's Included in the Kit: Jasic EVO MIG 250 CT PFC Inverter Trolley MIG Torch 4m Regulator Hose Earth Lead Why We Love The New Jasic Evo 2.0 MIG250 PFC Dual Voltage Package  ClearVision technology Intelligent synergic control Adaptable wide input voltage range: 110/230V Welding engineer mode allows more in-depth parameter changes Smart DC lift TIG Consistent and efficient MIG spot welding performance. Flexible remote control solutions. Generator friendly. Auto sleep mode for improved energy efficiency. Compatible with digital control MIG torch, as well as spool gun. LED light inside wire feed cabinet for improved vision. Cooling fan on demand. Voltage reduction device for improved safety. Overcurrent and overheat protection.

Jasic Evo MIG EM200C PFC Compact MIG Welder Package 110/230V

Jasic EVO MIG 200 PFC Inverter Welder The Jasic EVO MIG 200 PFC Inverter Welder features a rugged and ergonomic design. The handle elevates the overall aesthetic of the welder whilst also providing a comfortable and firm grip that is glove-friendly. The control panel features a 45 ° angle for enhanced visibility even under direct sunlight, and the front grille also features a slanted design that offers a perfect balance between heat dissipation and ingress protection. Featuring the latest technology, the 200 PFC welder comes with Intelligent Synergic Control, which means that setting up for a weld has never been faster. Input the correct information, and the machine will do the rest. It will pick the optimal settings for your weld. Built-in power factor correction improves the overall efficiency and enables compatibility with AVR generators. Welding engineer mode provides access to adjust in-depth parameters, allowing for greater freedom in parameter customisation. With features such as auto-sleep mode and an energy-saving smart fan, you can be assured that this welder is not only a great choice but also a sustainable one. The auto sleep mode saves energy by automatically putting the device into sleep mode after 10 minutes of inactivity, and the energy-saving smart fan helps reduce energy costs and conserve power. What's Included in the Kit: Jasic EVO MIG 200 PFC Inverter MIG Torch 3m Regulator Hose Earth Lead Why We Love The New Jasic Evo MIG 200 PFC Inverter Welder  Rugged, ergonomic design ClearVision technology Intelligent synergic control Adaptable wide voltage range Welding engineer mode Smart Lift TIG Consistent and efficient MIG spot welding performance Flexible remote control solutions (optional) Power factor correction (PFC), generator-friendly Quick factory reset; auto sleep mode Compatible with MIG digital torch and spool gun LED inside wire feed unit; handy accessory storage slot ABAP: Active Balancing Air Passage Fan on demand Voltage Reduction Device (VRD) Key power electronic component protection Overcurrent and overheat protection  

Jasic EVO TIG ET200P PFC Pulse Air-Cooled DC TIG Welder Package 110/230V

Jasic EVO 2.0 TIG 200P DC TIG Welder The Jasic EVO 2.0 TIG 200P is a next-generation DC TIG inverter built for welders who demand precision, reliability, and modern control in a compact, industrial package. Part of the new EVO 2.0 series, this machine combines a rugged, ergonomic design with an intuitive human-machine interface, delivering outstanding performance in workshop and site environments alike. Engineered with Dash-Arc high-frequency ignition and Smart Lift-TIG technology, the TIG 200P delivers fast, reliable arc starts with excellent control. Full DC pulse TIG functionality allows fine adjustment of pulse parameters, helping you manage heat input, improve bead appearance, and achieve consistent results on thin or heat-sensitive materials. Smart Gas technology further enhances efficiency by automatically optimising post-flow gas times, reducing waste without compromising weld quality. Designed for real-world conditions, the EVO 2.0 TIG 200P features power factor correction (PFC) for improved energy efficiency and generator compatibility, along with a wide input voltage range for dependable performance wherever you’re working. ABAP (Active Balancing Air Passage) cooling and a fan-on-demand system protect key components while reducing noise and power consumption, supported by auto sleep mode for maximum efficiency. Safety and durability are built in as standard, with VRD, overcurrent and overheat protection, and comprehensive electronic safeguarding. Optional remote control solutions provide added flexibility, while quick factory reset ensures simple recovery from incorrect settings. Supplied complete with TIG torch, earth lead, gas hose, and regulator, the EVO 2.0 TIG 200P is ready to work straight out of the box. Backed by a 5-year warranty, the Jasic EVO 2.0 TIG 200P DC TIG Welder delivers modern technology, dependable performance, and long-term peace of mind—engineered to perform today and built to last. Key Features 5 Years Warranty  Rugged, robust, and industrial look with ergonomic design Clear Vision technology Adaptable wide voltage range Dash-Arc Smart Lift TIG Full-featured DC pulse TIG parameters Flexible remote control solutions (Optional) Power factor correction (PFC), Generator friendly Quick factory reset; auto sleep mode ABAP: Active Balancing Air Passage Smart Gas for optimised shielding gas consumption Fan cooling on demand Voltage Reduction Device (VRD) Key power electronic component protection Over current and overheat protection Complete with tig torch, earth lead, gas hose and regulator

Weld Star Weldstar Infinium Multi-Process Pulse Welder 4 In 1 200A MIG, AC/DC TIG & MMA

Weld Star 4 in 1 Multi Process Welder 200 Amp Package The Weld Star Infinium inverter multi process machine has been designed to incorporate the most advanced features and technology offering the operator a user friendly interface via the 5”LCD screen. Advanced IGBT multi-process inverter technology which is compact andlightweight at only 20KG PFC technology offering multiple advantages such as energy efficiencyand wide range input voltage from 95Vac – 265Vac Generator friendly Automatic dual voltage input detection Smart fan – reduces power consumption and intake of dust and fumes IP23 protection Built to EN-60974-1 and is fully compliant with the European CommissionRegulation 2019/1784, CE and UKCA With synergic MIG/MAG, welding parameters can be automatically selectedbased on material thickness and voltage with synergic curves for commonmaterials and wires Built in TIG welding features such as HF or Lift TIG, pre/post flow gastimes, 2T/4T, slope up/down and pulse, all to ensure excellent TIG weldingcharacteristics in both AC and DC Smart TIG function with advanced TIG welding features such as multi-wave,Q start and hybrid TIG, whilst still maintaining ease of set up for the user DC and AC MMA suitable for a wide range of electrodes Advanced MMA features such as pulse and automatic current regulationbased on electrode diameter Built in hot start arc ignition function which ensures excellent arc ignition inMMA for easier and more reliable arc starting with built in self adaptive arcforce technology which maintains the optimum MMA arc conditions duringoperation even with long welding cables In-built VRD (MMA and TIG mode only) Ability to save up to 10 stored programmes for quick set up Advanced error code menu for ease of fault and troubleshooting diagnosis Panel mounted USB connection for quick and easy firmware updates

EWM Tetrix XQ 230 Puls AC/DC TIG Welder With Expert Front Panel 3.0 5P

EWM Tetrix XQ230 Puls AC/DC W Expert 5 Pole This highly efficient TIG welder has standby functionality and is the latest generation TIG AC/DC inverter machine, it features TIG AC/DC, TIG DC and TIG pulse, MMA welding, MMA pulse welding, MMA Cel and MMA Cel Pulse. This is a demodular machine which is capable of TIG DC and TIG pulse, MMA welding and MMA Cel Pulse. It also has ActivArc and Spotarc technology.  *This TIG AC/DC pulse welding machine comes with Expert 3.0 control with a 7 inch high resolution graphic display where all parameters can be set and controlled.  TIG Welding: Temperature and speed controlled fan for cooling which reduces contamination and noise emissions because the fan only is on when required. Remote control and function torch connection compatibility. Simple and tool free welding polarity reversal. IP23 splash proof standards. Robust case. Why we love the Tetrix XQ230 Puls AC/DC: Expert 3.0 control with 7 inch screen- easy to see and use. LED information bar to show current status.  Optional connection to network through Wifi or LAN. High capacity cooling system using the 1500 W high performance centrifugal pump with 8 litre coolant tank- this saves money on consumable costs.  High mains voltage tolerance. Generator compatible. Consumables box in the handle.

Parweld XTM211DI-P2 Multi Process Welder Package

Parweld XTM 211Di P2 MIG, DC TIG or MMA machine; The Parweld XTM211Di MIG, AC/DC TIG or MMA welder is a multipurpose machine ideal for welding steel, stainless steel or aluminium. This machine is capable of 3 different processes- MIG, DC TIG and MMA welding. This lightweight machine is compact and is housed in a metal housing with added carry handle, the total weight of the machine is 27.5kg. The torch can be remote controlled, this allows for parameters to be changed and process adjusted quickly and easily. The Parweld XTM211i has a dual voltage of 110 and 240V, this means that the device is ideal for use with generators or on-site. The LED digital display is large and provides a high-quality resolution, it is simple and easy to use but allows for full control when required. The option of full synergic control allows for rookie welders to gain experience but also maintains full customisation of parameters for professionals. A 15kg reel capacity means that the Parweld XTM211i is ideal for heavy industrial work as minimal reel changes are required. Additional features not usually found on other similar multi-process welding machines increase the usability of this product, the AC and DC TIG welding functions plus the high frequency welding functions ensure that this product is worth the money. The ability to weld aluminium, mild steel and stainless steel means this machine stands out from the crowd with it’s lift TIG arc ignition function. High frequency ignition ensures less inclusions at the start of the weld run and a nicer arc start. The adjustable pulse frequency makes welds look better and use less heat, this prevents distortion of materials. Thick materials can be welded with ease using the 200A output allowing materials up to 15mm thick using a 4mm rod. This machine also has automatic polarity switching. In summary, this multi-process machine is a 4 in 1 welder which is easy to use for professionals and amateurs alike. It allows for full control of all parameters through both the torch remote control and LED digital display.   *This package comes with MIG, TIG and Stick lead, if you are looking for MIG only package click here.    Parweld XTM 211Di P2 Package Comes Ready To Weld With: XTM 211 Multi-Process Machine Earth lead 2 x gas hoses 1 x regulator 1 x set of 0.8/1.0mm rollers  MIG Torch  TIG Torch  Stick lead   Key Features Compact & Portable The XTM 211Di is an ideal welder for site work due to its compact and portable size.   Two Roll Wire Feeder The built-in two-roll wire feeder allows for a smooth, strong input wire feed into the welding gun.   2T/4T Control Functions The 2T/4T trigger latching function makes this the ideal welder for long welding jobs. Switching on the 4T functionality means that the torch trigger is switched on without you having to hold the torch down. This reduces ‘finger fatigue’ when welding and allows for smoother continuous welds.   Smart Switching The XTM 211Di comes with built-in smart switching functionality. The machine can automatically switch between 110V and 230V, making it very efficient.     Parweld XTM 211Di Features: 110V / 230V dual voltage Multi-process MIG/TIG/MMA Quick and easy selection of welding process, control type, material and wire size Synergic control 2T/4T trigger latching Real-time display of parameters and data on high quality digital display Pulse TIG functionality for superior arc control Rapid set up using synergic control Memory functionality for all processes to save and recall programs Supplied with MIG torch, TIG torch and Earth lead MIG weld materials from 0.9mm to 15mm Welds steel, stainless steel or aluminium

Kemppi Minarc Evo 180 Stick Welder Set 230V

Kemppi Minarc EVO Stick Welder Package If you need a welder that keeps up with you, the Minarc Evo 180 delivers. Built with mobility in mind, it combines serious welding power with a compact, easy-to-carry design—ideal for site work where you don’t want to be dragging heavy equipment around. Despite its size, this machine punches well above its weight. It offers consistently high-quality welds across a wide range of electrode types, making it a reliable choice whether you’re tackling quick repairs or more demanding jobs. It also performs smoothly on both mains and generator power, even when using longer supply cables—so you’re not limited by your setup. Everything about the Minarc Evo 180 is designed to make your job easier. It’s lightweight enough to carry in one go, tough enough to handle site conditions, and efficient thanks to advanced PFC technology that helps maximise energy use. This Package includes: earth return and welding cables (3 m) and a shoulder strap. Key Features: Premium welding performance Use with all electrode types Use with long supply cables PFC technology for ultimate energy efficiency High current output and duty cycle Lightweight and portable Robust and durable Precise lift TIG technology Mains network or generator use Optional remote control Kemppi 3-year warranty for parts and labour

EWM Picomig 180 Synergic MIG Welder Package

Product Features No need to purchase additional characteristics – all characteristics for this machine type are included in the scope of delivery ex works Multiprocess inverter welding machine in set Easy Synergic one-knob operation and integrated wire feeder Set comprising: Picomig 180 Synergic, MT221G welding torch, flux cored wire spool (FCW 71T Selfshield 2 kg, 0.9 mm dia.), steel wire spool (SW 70S G3 2 kg, 0.8 mm dia.), workpiece lead, gas hose, pressure regulator and flux cored nozzle Welding procedures and functions Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 GMAW standard welding Synergic characteristics for steel, CrNi, aluminium and flux cored wires MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Synergic or manual welding operation Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time Your benefits  Portable, compact Robust casing suitable for construction site use High open circuit voltage for excellent ignition characteristics 4-roll drive Energy-saving thanks to high efficiency and standby function Easy, tool-free change of welding polarity Earth fault monitoring (PE protection) 3.5 m mains supply lead with 16 A shock-proof plug Tech Specs Operation mode Synergic operation Welding process MIG/MAGTIGMMA Operating modes Non-latched Parameters in display Welding currentWire feed speedPlate thicknessJOB numberError codePolarity display Number of JOBs 35 MMA functions HotstartArcforceAntistick Setting range for welding current 5 A - 180 A Duty cycle 40 °C 180 A / 25%120 A / 60%100 A / 100% Open circuit voltage 80 V Mains voltage 1 x 230 V Tolerances -40 % up to +15 % Mains frequency 50 Hz / 60 Hz Recommended generator power 8 kVA Wire feed speed 1 m/min - 15 m/min39.37 ipm - 590.55 ipm Factory-installed roll equipment 0,8 + 1,0 mm / Stahl Spool diameter D200 Torch connection Eurozentralanschluss Protection classification IP23 EMC class A Dimensions (L x B x H) 559 mm x 276 mm x 340 mm22.008 Zoll x 10.866 Zoll x 13.386 Zoll Weight 16 kg35.28 lbs Standards IEC 60974-1, -5, -10 CL.A

Jasic Cut 160 Plasma Inverter Package

Jasic Plasma Cut 160 Inverter The Jasic Plasma Cut 160 Inverter is a high-performance, professional plasma cutting machine designed to deliver smooth, precise, and reliable results on even the most demanding cutting tasks. Built using the latest IGBT inverter technology, it provides excellent cutting stability, efficiency, and long-term reliability, making it an ideal choice for industrial fabrication, maintenance, and production environments. With variable cutting control, operators can fine-tune performance to suit the material and application, achieving consistently clean, accurate cuts with minimal dross. The Plasma Cut 160 delivers an impressive clean-cut capacity of up to 45mm and severance cuts of up to 50mm, ensuring it can handle thick materials with ease. High-frequency arc ignition ensures fast, reliable starts, while the clear LED display and intuitive controls make the machine easy to operate. Designed with practicality in mind, the unit is supplied trolley-mounted for easy manoeuvrability, allowing it to move effortlessly around the workshop or job site. An in-built pressure regulator ensures consistent airflow at all times, helping maintain consistent cut quality and prolong consumable life. For automated cutting applications, the machine is CNC-ready when fitted with the appropriate interface and also generator-friendly when used with regulated-output generators. Reliable, powerful, and easy to use, the Jasic Plasma Cut 160 Inverter is a versatile cutting solution for professionals who demand precision, performance, and durability. Why we love this Plasma Cutting Inverter: IGBT powerful components Trolley mounted for easy manoeuvring Variable control for cutting  High-frequency ignition LED display Smooth and precise cutting  Simple to use In-built pressure regulator Automated cutting can be done- requires the CNC interface Generator-friendly- with generators which have a regulated output. 45mm clean cut capacity 50mm severance capacity  What is included in the Jasic Plasma Cut 160 package: Inverter power source Wheel-mounted Plasma torch Earth return lead Operating instructions 5-year extended warranty

Jasic TIG 400P DC Water-Cooled TIG Welder Package 415V 3Phase

Jasic TIG 400P Pulse Inverter (Water-cooled) Package: Take control of demanding welding tasks with the TIG 400 Pulse, a high-performance machine built for both DC TIG and DC MMA applications. Featuring a modern, intuitive control panel and a modular design, it comes supplied with a trolley and water cooler to support efficient, uninterrupted working on even the toughest jobs. Powered by advanced IGBT inverter technology running at 40kHz, the TIG 400 Pulse delivers excellent efficiency and outstanding current stability, producing clean, consistent welds with professional-quality results. 2T/4T trigger modes reduce operator fatigue, while adjustable upslope, downslope, and pre- and post-gas flow settings allow fine-tuned control for smooth, repeatable welds. Designed to perform reliably in challenging conditions, the machine includes automatic mains voltage compensation, AVR generator compatibility, and hot start and arc force control for dependable arc ignition and stable MMA welding. With eight programmable memory channels and advanced DC TIG pulse functionality, complex welding operations become simpler and more precise. A durable, high-quality tactile finish, front-mounted remote control connections, and intelligent fan-on-demand and water cooling systems ensure long-term reliability and performance. Supported by a comprehensive 5-year warranty, the TIG 400 Pulse delivers the versatility, precision, and build quality professionals can rely on—day after day. Key Features: Industrial-grade IGBT Inverter technology DC pulse TIG and MMA machine with VRD functionality The MCU chip improves the accuracy and consistency.  High-frequency or lift-arc ignition, 2T and 4T, and spot-time features are included. Digital, user-friendly interface Up and down slope, pre- and post-flow, crater/initial/weld current. Gas test function in the DC TIG mode Modular design with everything included (trolley and water cooler).  8-channel storage, which is automatic On-demand fan for cooling as well as water cooling Generator (regulated output) friendly. The foot pedal is optional. What is included in this package: Inverter power source Trolley  Water Cooler TIG torch and adaptor Gas regulator  Earth return lead  

EWM Picomig 180A 230V Pulse MIG Welder Package

Product Features Multiprocess inverter welding machine and pulse set Easy Synergic one-knob operation and integrated wire feeder MIG, TIG & MMA MIG Pulse Welding Synergic & Manual Operation 4 Roll Wire Feed Drive Inverter based machine DC Current Gas-cooled Robust plastic casing with no corners or edges Polarity selection and display - Perfect for welding with flux cored wire 3.5M mains supply lead with 16A shock proof plug Overvoltage protection - No damage to machine caused if inadvertently connected to 400V mains voltage Included In This Price: Picomig 180 puls, MT221G welding torch, flux cored wire spool (FCW 71T Selfshield 2 kg, 0.9 mm dia.), steel wire spool (SW 70S G3 2 kg, 0.8 mm dia.), workpiece lead, gas hose, pressure regulator and flux cored nozzle Welding procedures and functions GMAW pulsed welding and GMAW standard welding Synergic characteristics for steel, CrNi and aluminium MMA welding and TIG lift arc welding Perfect for welding self-shielding flux cored wires Infinitely adjustable arc dynamics (choke effect) Synergic or manual welding operation Non-latched/latched operation Interval welding Adjustable gas pre- and post-flow time Your benefits Portable, compact Saves power through highly efficient performance Robust casing suitable for construction site use Easy, tool-free change of welding polarity IP23 spray water protected Wire spool diameter up to 200 mm/D200 3.5 m mains supply lead with 16 A shock-proof plug Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355 Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage Tech Specs Setting range for welding current 5 A - 180 A Duty cycle 40 °C 180 A / 25%120 A / 60%100 A / 100% Open circuit voltage 80 V Mains voltage 1 x 230 V Tolerances -40 % up to +15 % Mains frequency 50 Hz / 60 Hz Recommended generator power 8 kVA Wire feed speed 1 m/min - 15 m/min39.37 ipm - 590.55 ipm Factory-installed roll equipment 0,8 + 1,0 mm / Stahl Spool diameter D200 Torch connection Eurozentralanschluss Protection classification IP23    EMC class A Dimensions (L x B x H) 559 mm x 276 mm x 340 mm22.008 Zoll x 10.866 Zoll x 13.386 Zoll Weight 16 kg35.28 lbs Standards IEC 60974-1, -5, -10 CL.A