Non Woven Scotch Roll 100MM x 10Mtrs

Non Woven Scotch Roll 100MM x 10Mtrs  Abracs Non-Woven Rolls provide consistent surface preparation. Ideal for cleaning a wide range of applications and specially designed to resist loading, prolonging product life. Tightly woven for consistent action without compromising durability. Flexible construction is ideal for grooves, scratch in channels and other hard to reach areas. Available in 3 different levels of coarseness for different applications. Coarse is Green In Colour Medium is Maroon In Colour Fine Is Grey In Colour

Pferd Polifan Strong CO-Freeze SGP 50Grit Stainless Ceramic Flap Disc 125mm (5")

Polifan® Strong CO-Freeze SGP Flap Disc – 125mm x 22.23mm – 50 Grit (Ceramic for Stainless Steel) Size: 125 mm (5") x 22.23 mm Grit: 50 Material: Ceramic oxide with CO-Freeze active grinding aid Application: Stainless steel, Inox, nickel alloys, high-temperature-resistant steels Product Overview The Polifan® Strong SGP CO-Freeze from PFERD is a premium-grade ceramic flap disc built for demanding stainless steel and exotic alloy grinding tasks. With a cool grinding aid (CO-Freeze) and aggressive ceramic grain, it delivers fast stock removal, extended service life, and significantly reduced heat build-up, making it ideal for stainless steel and heat-sensitive materials. Key Features Aggressive 50 Grit Ceramic Grain Optimized for fast material removal with a consistent, aggressive cut. CO-Freeze Grinding Aid A special coolant additive integrated into the flap design reduces heat buildup, preventing discoloration or warping on stainless steel and alloy workpieces. High Stock Removal Rate Especially effective for surface leveling, weld seam dressing, and edge work on stainless and exotic metals. Long Service Life Durable polycotton backing combined with top-tier ceramic abrasive provides extended usage per disc. Minimal Discolouration and Burr Formation The cool grinding effect preserves the finish and reduces post-processing. Consistent Performance Maintains cutting power throughout its lifespan due to uniform flap wear and ceramic self-sharpening effect. Technical Specifications PropertyValue Diameter 125 mm (5") Bore 22.23 mm Grit Size 50 (Medium Coarse) Abrasive Ceramic with CO-Freeze additive Max RPM ~12,200 Shape Flat (T27) or Conical (T29) Tool Compatibility Angle grinders Application Range Stainless steel, Inox, titanium, duplex, and nickel alloys Applications Weld seam removal and blending Surface grinding and leveling on stainless steel Edge deburring and prep work for TIG/MIG weld zones Grinding of nickel-based and heat-resistant alloys Use in fabrication, shipbuilding, food-grade stainless finishing, and pharma-grade fabrication Benefits High removal rates with minimal pressure Low heat generation – reduces risk of tempering colors Longer life than conventional flap discs Reduced disc changes during extended tasks Excellent for stainless steel surface protection and high finish requirements Compliance & Safety   Produced by PFERD to meet strict EN 13743 safety standards Marked for Inox compatibility Always wear appropriate PPE when grinding

Cibo QLSA Lockit SA7 Unitised 50MM x 6MM Disc Grade 7 Roloc Type

QLSA Lockit SA7 Unitised 50MM x 6MM Disc Grade 7 Roloc Type  Unitised quick change discs with a Lockit / Roloc type fixing.SA 7 50 mm diameter discWith a flexible finishing action unitised discs are great for deburring, finishing and pre-polishing. Grade 5: Light scratch removal and pre-polish finishingGrade 7: deburring and fine finishing (nominally 320 grit)Grade 8: heavier deburring and tig weld blending (nominally 240 grit)

Cibo QLSA Lockit SA5 Unitised 50MM x 6MM Disc Grade 5 Roloc Type

  Unitised quick change discs with a Lockit / Roloc type fixing.SA 5 50 mm diameter discWith a flexible finishing action unitised discs are great for deburring, finishing and pre-polishing.   Applications: Grade 5: Light scratch removal and pre-polish finishingGrade 7: deburring and fine finishing (nominally 320 grit)Grade 8: heavier deburring and tig weld blending (nominally 240 grit)

Norton Abrasives Norton Quantum 3 Ceramic Grinding Disc 4.5"(115mm), 5"(125mm), 7"(180mm) & 9"(230mm)

Norton Quantum 3 – The Grinding Solution Disc The newest innovation in grinding wheel technology, Norton Quantum 3 is made of proprietary ceramic grain and a tougher bond making it the fastest grinder around.   Features & Benefits of using Norton Quantum 3: Reduced Grinding Time  - There is significant reduced grinding time with the Norton Quantum 3 grinding disc. This is due to the increased throughput using a sharper wheel which will provide the highest metal removal and also reduced pressure from faster cutting action. Improved User Comfort Levels - Norton Quantum 3 ceramic grinding disc provides improved comfort levels. There is a reduction of hand fatigue due to less cutting vibration thanks to optimised positioning of ceramic grain for 3D grinding and to the unique mix of abrasive and bond. The low grinding pressure allows for an increased operator comfort from lower vibration.  The operator won’t have to apply excess pressure so will be able to finish the job quicker compared to using other standard / lower performing products.   Fewer Wheel Changes - Using Norton Quantum 3 produces less downtime and waste! As the disc is made from proprietary ceramic grain, it delivers consistent cuts with a better finish due to the continuous sharp edges the ceramic provides as the grains break down. Your process cost is improved with fewer wheel changes as the wheel life is much longer compared to other standard grinding wheels on the market. Throughout the wheel life a more uniformed cutting action is produced and therefore a better overall grinding experience. Smoother Grind at a Faster Rate - There is also a better control with the Norton Quantum 3. The wheels do not generate a ‘grabbing’ or ‘digging’ on the work piece when used in any direction. The wheels freely glide on the work piece whilst removing metal, thus produces a very smooth grind at a faster rate. 

Cibo SHS Spiraband Ceramic Grit 30 x 30MM

Cibo SHS Spiraband Ceramic Grit 30 x 30mm The Cibo SHS Spiraband with ceramic grit in 30 x 30mm size delivers exceptional performance for heavy-duty grinding, deburring, and finishing applications. Designed for use with SHS rubber holders, this spiraband offers powerful material removal with superior control—ideal for tackling larger surface areas while still accessing tighter contours. Made with premium ceramic abrasive grain, this spiraband ensures aggressive cutting action, reduced heat build-up, and extended service life. It's perfectly suited for demanding applications on stainless steel, heat-resistant alloys, and hard metals, commonly used in the fabrication, maintenance, and engineering sectors. Key Features: Size: 30mm diameter x 30mm length Abrasive Type: High-performance ceramic grit Aggressive Grinding: Rapid stock removal with a consistent finish Long-Lasting: Excellent durability even under high pressure Cooler Cutting: Helps prevent overheating and workpiece discoloration Ideal For: Surface preparation, weld blending, and finishing on tough metals   Whether you're working in tight spots or need reliable performance across larger areas, the Cibo SHS 30 x 30mm ceramic spiraband offers a perfect balance of power, control, and efficiency.

Cibo SHS Spiraband Ceramic Grit 15 x 30MM

Cibo SHS Spiraband Ceramic Grit 15 x 30mm The Cibo SHS Spiraband with ceramic grit is a high-performance abrasive solution designed for aggressive stock removal and consistent surface finishing. Measuring 15 x 30mm, this spiraband is ideal for use in tight or hard-to-reach areas, making it the perfect choice for precision grinding, deburring, and finishing tasks. Engineered with premium ceramic grain, the SHS Spiraband offers exceptional cutting power, longer lifespan, and cooler grinding performance compared to conventional abrasives. It’s especially effective on stainless steel, exotic alloys, and hardened materials—making it a popular choice in fabrication, aerospace, and heavy industry. Key Features: Size: 15mm diameter x 30mm length Abrasive Type: High-performance ceramic grit Excellent Durability: Long-lasting performance under high pressure Cool Cutting Action: Reduces heat build-up and material discoloration Versatile Use: Suitable for stainless steel, titanium, and other tough metals Ideal For: Weld removal, surface preparation, and deburring in confined areas Compatible with SHS rubber drum holders, the Cibo ceramic spiraband is the go-to abrasive for demanding applications where quality and consistency matter.

Cibo Finipower PTX Machine Stainless Steel Fabricator Kit-230V

Finipower Stainless Steel Fabricator Kit 230V This kit has all the products needed to begin stainless steel fabrication work, the variable speed grinder allows you to achieve a flawless high quality finish. The fabrication kit includes the 230V Finipower Plus 1700 Watt variable speed grinder, it also includes a range of tools which fit on this model.  Weld removal is easy on stainless steel box section, use the 80 grit ceramic fibre discs, this leaves a nice finish which can easily be blended. The FMCMC Ginger Ninja brush can be used to restore satin finish. To refine the finish even further use the FMTM 80 grit tex brush. For tube work the RCD discs will remove blend and fillet the tig weld to leave a 240 grit finish in one action. THe SAG 5 unitised disc will do a good job. Also included is the Med S handpads, this ensures a 240 grit satin finish.     

Cibo FinitEasy 110V Fillet Weld Grinder set

Cibo FinitEasy 110V Set The CIBO FinitEeasy is the original and still the best fillet weld grinder. The 110 volt FinitEasy fillet weld grinder has flanges for 22mm and 25.4mm discs so it can be used with almost any abrasive product including cutting, grinding & flap discs as well as the more well known unitised discs for fillet weld grinding & polishing. Use the MA8 or the new GA7 and GA8 unitised discs for removing fillet welds and polishing stainless steel tig welds in one simple action. We stock a range of Cibo products, take a look here or get in touch for our full range.    FAQ's Can I use the FinitEasy on aluminium or brass? Most definitely. The unitised products work just as well on aluminium and brass as they do on stainless steel. If you like the GA8 disc on a stainless TIG weld then just drop down a grade or 2 to maintain control and ensure a great quality finish.   Contents of this package: 1x FinitEasy Fillet Weld Grinder 1x Abrasive File 2x FA Unitised Discs (FA3 & FA5) 3x SA Unitised Discs (SA5, SA6 & SA7) 1x MA Unitised Disc 1x TA Unitised Disc 2x GA Combi Unitised Discs (GA7 & GA8) 1x SAG Unitised Finishing Disc 1x RCD Flap Disc 1x Felt Finishing Disc 1x PV/102 Polishing Compound 1x Tex Open Belt 1x FORU Rubber Sanding Block 1x Inoxiclean Stainless Steel Cleaner   Use This handheld abrasive machine with: SA or MA unitised discs to remove TIG welds in corners and to satin finish or mirror polish in two or three steps Cutting and grinding discs where you need access in difficult to reach areas  Felt and cotton mops for mirror polishing CIBO Time Saving Kits set 2,3,5 or 6 for a complete process

Cibo FinitEasy 230V Fillet Weld Grinder set

Cibo FinitEasy 230V Set  The CIBO FinitEasy is the original and still the best fillet weld grinder. The 230 volt FinitEasy fillet weld grinder has flanges for 22mm and 25.4mm discs so it can be used with almost any abrasive product including cutting, grinding & flap discs as well as the more well known unitised discs for fillet weld grinding & polishing. Use the MA8 or the new GA7 and GA8 unitised discs on the FinitEasy for removing fillet welds and polishing stainless steel TIGwelds in one simple action.   FAQ's Can I use the FinitEasy on aluminium or brass? Most definitely. The unitised products work just as well on aluminium and brass as they do on stainless steel. If you like the GA8 disc on a stainless tig weld then just drop down a grade or 2 to maintain control and to ensure a great quality finish.  We now stock a range of Cibo products, take a look here or get in touch for our full range.    Contents: 1x FinitEasy Fillet Weld Grinder 1x Abrasive File 2x FA Unitised Discs (FA3 & FA5) 3x SA Unitised Discs (SA5, SA6 & SA7) 1x MA8 Unitised Disc 1x TA Unitised Disc 2x GA Combi Unitised Discs (GA7 & GA8) 1x SAG Unitised Finishing Disc 1x RCD Flap Disc 1x Felt Finishing Disc 1x PV/102 Polishing Compound 1x Tex Open Belt 1x FORU Rubber Sanding Block 1x Inoxiclean Stainless Steel Cleaner   Use the FinitEasy with: SA or MA unitised discs to remove tig welds in corners and to satin finish or mirror polish in two or three steps Cutting and grinding discs where you need access in difficult to reach areas Felt and cotton mops for mirror polishing  CIBO Time Saving Kits set 2,3,5 or 6 for a complete process

Cibo Finimaster Pro 110V PTX Drum Sander machine

Cibo Finimaster Pro Drum Sander Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro  We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing  

Cibo Finimaster Pro 110V PTX Drum Sander Set 1 Kit

Cibo 110V Finimaster Pro Drum Sander (Set 1) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.  We stock a range of Cibo products, take a look here or get in touch for our full range.  Finimaster Drum Sander set 1 contents: FMCI 110v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5)   For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing    

Cibo Finimaster Pro PTX Sander 110V Set 2 Drum

Cibo Finimaster Pro 110V Drum Sander Set 2 The 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro  We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    We stock a range of Cibo products, take a look here or get in touch for our full range.    This Cibo Finimaster Drum Sander Set 2 Contains: FMCI 110v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMCM Combi Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5) Inoxiclean Stainless Steel Cleaner (x1 can) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m) Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing Grain finishing: Use the Finimaster Pro with abrasive sleeve on inflatable tyre, then a wide range of tex and combination wheels to get the desired finish.  Tube finishing: Use the drive roller with grip fixing belts to allow best satin finishing in the tightest locations.   This Cibo Drum stander is the ideal machine for sheet, round tube, square tube, square tube and box section finishing. Finimaster Pro Drum Sander has 5 inch diameter to give best quality, no mark, chatter free surface finish. 

Cibo Finimaster Pro 230V Drum Sander Machine only in case

Cibo Finimaster Pro Drum Sander  This is the 230V, machine only option for the Finimaster Pro Drum sander, it is designed for high quality satin polishing as well as sheet metal fabrication graining. The large diameter wheels ensure a chatter free experience making it easier to get the high quality satin finish desired.  M14 thread ensures that wheel changes are efficient and allow the sander to get into the edges. Cast iron handle ensures an ergonomic grip and high level of visibility when working with flat and rounded surfaces. Reduction in consumable cost due to larger wheels and sleeves.  Better access + larger wheels + longer life + higher quality finish = Finimaster Pro When grain finishing use the abrasive sleeves and inflatable tyre followed by a wide range of tex and combination wheels to achieve the desired finish. Tube finishing require a switch over to the drive roller with the grip fixing belts to allow higher quality finish even in tight locations.    Use the Cibo Finimaster Pro Drum Sander with:  – The FMSB/M drive wheels for satin finishing and mirror polishing round rubes– Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre– Tex /combi flap brushes for satin finishing– Sisal / cotton / flannel polishing wheels for high quality mirror polishing  

Cibo Finimaster Pro 230V PTX Drum Sander Set 1

Cibo Finimaster Pro Drum Sander (Set 1) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Contents of Set 1: FMCI 230v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5)   We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing    

Cibo Finimaster Pro 230V Drum Sander Set 2

  Cibo Finimaster Pro Drum Sander (Set 2) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Contents of Set 2: FMCI 230v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMCM Combi Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5) Inoxiclean Stainless Steel Cleaner (x1 can) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m)   We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing The Finimaster Pro is the best satin polishing machine for sheet, rounded, square tubing and box section finishing. This machine operates with 5 inch diameter wheels prevents chatter and high quality surface finish each time. 

Time Saving Kit For Mirror Polishing Stainless Steel Box

  Weld Removal and Mirror Polishing Stainless Steel Sheet TSK04 contains all the product you need to: Grind stainless steel tig weldsRemove all grind marksCreate a high reflection mirror polish finish. For detailed guidance and tips, take a look at our Time Saving Kit 04 blog. TSK04 – Instructions – Full stainless steel abrasive and polishing instructions come inside the box. The basic process includes: Grind stainless steel tig weld with the FX87GR discRefine the finish with Trizact and unitised discsMirror polish with felt and cotton products and our PV/101 and PV/102 soaps. TSK04 – Videos – You will receive a web-link to the full TSK04 videos which gives you a detailed breakdown of the complete process. From weld grindingHow to refine the grind linesCorrect machine speedsThe right abrasives for each stepAbrasive techniquesCreating the perfect mirror polish finish Use the right speed: For optimum performance the TSK04 kit is best used with a variable speed grinder

Cibo Time Saving Kit For Satin Finish Stainless Mitre Corners

Brush Finishing of Flat Stainless Steel and Mitre cornersTSK01 contains all the products you need to: Remove a stainless steel tig weld.Refine the grind lines.Restore a high quality satin finish and create perfect mitre corners. For detailed guidance and tips, take a look at our Time Saving Kit 01 blog. TSK01 – Instructions – Full stainless steel finishing instructions inside every box. The basic process includes: Remove the stainless tig weld with a FX87GR Cibo Ceramic disc.Refine the finish with 3M Trizact grip discs.Use the Cibo Inoxitape to create a perfect mitre finish.Use our FMCM abrasive combi brushes for the satin finish. TSK01 – Videos – You will receive a web-link to the full TSK01 video which gives you a detailed breakdown of the complete process: How to remove the weld.How to refine the grind lines.Correct machine speeds.The right abrasives for each step.Abrasive techniques.Creating a professional brush finish. Use the right speed: For optimum performance the TSK01 kit is best used with a variable speed grinder

HMC Carbide Burr Set 5 Piece 5 shapes for Welding Preparation

HMC Carbide Burr Set – 5 Piece (5 Shapes) for Welding Preparation SET04 – Versatile Metal Shaping & Finishing The HMC Carbide Burr Set SET04 is a high-quality, professional-grade 5-piece kit designed specifically for welding preparation, metal shaping, and finishing applications. Featuring five essential burr shapes, this set provides the versatility needed to tackle a wide range of fabrication tasks with precision and efficiency. Manufactured from durable tungsten carbide with a diamond cut profile, each burr delivers fast material removal with smooth control, making it ideal for use on steel, stainless steel, titanium, and cobalt alloys. The selection of shapes allows for effective access to tight areas, enabling users to open up cracks, clean weld roots, and refine fillet welds with ease. () Each burr is fitted with a standard 6mm shank, ensuring compatibility with most die grinders and rotary tools, while the robust construction ensures long service life even under demanding workshop conditions. Included Shapes: Bull nose (rounded cylinder) for general shaping Teardrop for contouring and access Rounded tree for curved surfaces Pointed tree for precision work in tight areas Flame shape for blending and finishing Key Features: 5-piece set with essential burr shapes for versatility Diamond cut tungsten carbide for efficient cutting performance Suitable for steel, stainless steel, titanium, and cobalt alloys Ideal for weld prep, deburring, shaping, and finishing 6mm shank compatible with standard die grinders Durable construction for long-lasting use Designed for welders and metal fabricators, the HMC SET04 Carbide Burr Set provides the flexibility and performance needed to achieve clean, precise results across a wide range of applications. Includes: Burr 1: Bull Nose burr, 9.5 mm diameter, x 19 mm length, shape CBurr 2: Teardrop shape, 9.5 mm diameter, shape EBurr 3: Rounded tree shape, 9.5 mm diameter x 19 mm length, shape FBurr 4: Pointed Tree shape burr, 12.7 mm diameter, 19 mm length, shape GBurr 5: Flame shape,12.7 mm diameter, 32mm length, shape H

Cibo Rebel One Unitised Metal Polishing Discs (SAG Range) 4.5(115mm) & 5"(125mm)

Applications: These unitised discs are mounted on a backing disc for directly fitting onto the flanges of angle grinders (preferably variable speed) and metal polishers. Unitised material is re-processed non-woven abrasive. By varying the hardness, formulation and abrasive mix different performance characteristics are achieved.  At their softest, FAG 4 discs are ideal for stripping paint and coatings due to their conformity. They also work well on aluminium, leaving a better finish than may be obtained with a conventional stripping disc. SAG grades 5 & 7 are ideal for surface improvement and are often known as pre-polishing discs. Use grade 5 for polishing and grade 7 where a little more aggression is required, such as in blending ground off TIG welds. MAG discs are more aggressive still and will leave light swirl marks. The grade MAG5 is also great on aluminium and brass, with low clogging properties. MAG will grind off small amounts of metal, leaving a fine swirl finish. Specification: Made with non-woven abrasive material blend. Mounted on a fibreglass backing plate with 22.2mm fixing. No backing pad required. Free from iron contamination - ideal for stainless steel. Advised speed: 4,000-5,000rpm. Max speed 115mm: 10,000rpm, 125mm:8,000rpm. For use on cool metal. 

Cibo 5"(125mm) Rapid Combi Flap Disc

Cibo 125mm(5") Rapid Combi Flap Disc Applications:  Designed and patented by Cibo Abrasives, specialists in stainless steel finishing products, Rapid Combi-Discs (RCDs) will remove a TIG weld and leave a fine brushed or satin finish in one operation. They are also useful for finishing angles, improving rough surfaces and refining coarse grinding lines. They are most effective on metal polishers, set at around 6,000rpm, but they can also be used on full speed angle grinders. They give much more controlled material removal than standard flap discs and low heat generation. Specification: Alternate layers of selected coated abrasives and non-woven surface conditioning material. Available in ultra-coarse (controlled grinding), coarse (brushed finish), medium and very fine (satin finish). Recommended speed: 6,000rpm. Max speed: 115mm 13,300rpm, 125mm 12,200rpm. Complete with backing plate - no backing pad required.

Sia 50mm(2") 2820 Siamet Quick Lock Zirc Sanding Disc

Sia 50mm (2") 2820 Siamet Quick Lock Zirconia Sanding Disc The Sia 50mm (2") 2820 Siamet Quick Lock Zirconia Sanding Disc is a high-performance abrasive designed for fast material removal and long service life. Featuring premium zirconia grain, this disc delivers aggressive cutting action and excellent durability, making it ideal for heavy-duty grinding and surface preparation tasks. The convenient quick lock fastening system allows for fast, secure disc changes, reducing downtime and improving efficiency in workshop and production environments. Engineered for consistent performance, the 2820 Siamet disc performs exceptionally well on steel, stainless steel, and other hard metals. Perfect for fabrication, automotive, and industrial applications, this compact 50mm (2") disc provides precision control in tight or detailed working areas. Key Features:   50mm (2") diameter 2820 Siamet series abrasive Premium zirconia grain for aggressive cutting Quick lock system for rapid disc changes Long-lasting performance and consistent finish Suitable for steel, stainless steel, and other metals Materials Unalloyed / low-alloy steel; Non-ferrous metal 

Cibo Trizact Grip Polishing Disc 5"(125mm) + 3"(75mm Inner)

Applications: These discs are made with 3M Trizact 237 synthetic abrasive laminated to a grip backing. In this form they are part of a process to rapidly blend TIG welds and improve stainless steel surfaces most of the way to a polish, in fewer stages than would be required with conventional abrasives. Trizact's uniform grain structure improves consistency on batches so that the first and last components finished have a high level of consistency.    In order to give maximum disc life, the disc centres will press-out for re-use on 75mm backing pads. Example: 115 + 75mm is a 115mm disc with 75mm press-out option. When outer edge is worn, the 75mm centre can be pressed out and re-used. Specification: Trizact 237 synthetic abrasive. Laminated to a loop grip (Velcro type) backing. For use with suitable backing pad. Inter-liner recommended for use on stainless flat. Centre press-out (choose +75mm) available for re-use (wear tends to be fastest around perimeter). Sold in packs of 10

Pegatec Professional Line Metal Cutting Disc 12"(300mm)

Pegatec Professional Line 12" (300 mm) Metal Cutting Disc Part of the Pegatec Professional Series Size: 12" (300 mm) x 3.0 mm x 25.4 mm Application: Mild steel, carbon steel, structural metals, and general ferrous materials Tool Compatibility: Chop saws, stationary cutting machines Product Overview The Pegatec Professional Line 12" Cutting Disc is a high-performance abrasive wheel designed for fast, clean, and reliable cutting of metal materials using chop saws or stationary cut-off machines. Engineered with premium grain and a reinforced bond structure, this disc ensures high cutting efficiency with minimal wheel wear and user fatigue. Key Features Heavy-Duty Construction A 3 mm thick profile provides excellent durability and stability, particularly during prolonged or deep cuts. Premium Aluminium Oxide Grain Fast-cutting and wear-resistant, ideal for tough metal cutting applications including solid bar, pipe, angle, and channel. Reinforced Safety Mesh Dual fiberglass mesh layers enhance wheel strength and reduce the risk of breakage during high-speed operation. Optimised for Stationary Machines Perfect for use with chop saws and bench-mounted cutting tools operating at standard RPMs for 300 mm discs. Smooth & Accurate Cutting Performance Designed for minimal vibration, clean cut edges, and reduced heat generation during operation. Technical Specifications PropertyValue Diameter 300 mm (12") Thickness 3.0 mm Bore Size 25.4 mm Max Speed 5,100 RPM Operating Speed Up to 80 m/s Abrasive Type Aluminium Oxide Bond Type Resin-bonded, reinforced Applications Cutting of solid steel sections and pipe Fabrication and metalworking shops Construction sites Engineering workshops Maintenance and repair operations Benefits Long service life under heavy workloads Consistent cutting performance throughout the disc’s lifespan Cost-effective for volume cutting applications Suitable for ferrous metals including carbon steel and rebar Safety & Compliance Manufactured under ISO 9001 quality systems Fully compliant with EN 12413 standards Fiberglass-reinforced for added user safety Always use appropriate PPE and ensure machine compatibility