ESAB MW2000 Welding Overalls Flame Resistant

The ESAB MW2000 Flame Resistant Welding Overalls are professional protective workwear designed specifically for welding, fabrication and associated industrial applications where protection against heat, flame and welding hazards is required. Designed with the demands of professional welders in mind, the MW2000 provides full-body coverage while maintaining the comfort and freedom of movement required for everyday workshop use. The flame-resistant construction helps protect the wearer against brief contact with flame, heat and welding-related hazards, while the overall design helps reduce exposed areas compared with separate jacket and trouser combinations. Practical pockets provide convenient storage for everyday workplace essentials, while the durable construction makes the MW2000 well suited to fabrication shops, engineering facilities, maintenance departments and other demanding industrial environments. Backed by the trusted ESAB name, the MW2000 is an excellent choice for professional welders looking for dependable protective clothing designed around the requirements of welding and fabrication. Key Features Genuine ESAB MW2000 welding overalls Flame-resistant protective workwear Designed specifically for welding and fabrication Full-body overall design Helps protect against heat and brief contact with flame Protection against welding-related hazards Durable construction for professional use Designed to provide good freedom of movement Practical storage pockets Suitable for extended workshop use Ideal for welders, fabricators and maintenance professionals Safety Standards & Specification Codes The MW2000 range is designed as protective clothing for welding and associated industrial applications. EN ISO 11611 – Protective clothing for use in welding and allied processes. EN ISO 11612 – Protective clothing providing protection against heat and flame. Always refer to the certification and garment label supplied with the product for the exact class and performance levels applicable to the specific MW2000 garment. Typical Applications Ideal for: MIG/MAG welding TIG welding MMA/Stick welding General fabrication Engineering Metalworking Maintenance and repair Industrial welding environments Specification Brand: ESABModel: MW2000Product Type: Welding Overalls / CoverallsProtection: Flame ResistantStandards: EN ISO 11611 & EN ISO 11612Application: Welding, Fabrication & Industrial Work The ESAB MW2000 Flame Resistant Welding Overalls provide professional welders and fabricators with a practical combination of protection, durability and everyday working comfort. Please Note: Welding PPE should always be selected according to the welding process, workplace risk assessment and level of heat, flame, spatter and other hazards present.

Furick 17 ICK Insulator Bush For CK Torches

Furick 17 ICK Insulator Bush – For CK Torches The Furick 17 ICK Insulator Bush is a precision replacement component designed for use with CK 17 series TIG torches. Engineered to provide proper electrical insulation and secure fitment, this insulator bush ensures reliable torch performance and safe operation during welding applications. Manufactured from high-quality, heat-resistant materials, the Furick 17 ICK insulator bush helps maintain correct component alignment while protecting internal torch parts from electrical contact and heat exposure. Ideal for professional TIG welders and fabrication workshops, it supports consistent arc performance and long-term durability. Key Features: Genuine Furick 17 ICK insulator bush Compatible with CK 17/18/26 series TIG torches Provides reliable electrical insulation Heat-resistant and durable construction Ensures secure fit and proper torch assembly Ideal for professional TIG welding applications

Starparts WP20 Rigid Head Water Cooled Replacement TIG Torch Body

WP20 Rigid Head Water-Cooled Replacement TIG Torch Body The Starparts WP20 Rigid Head TIG Torch Body is a premium water-cooled TIG solution designed for precision welding at higher amperages. Featuring a rigid head, this torch body gives welders exceptional control and comfort when working in tight spaces or on intricate joints. Its robust construction and efficient water-cooling system make it ideal for demanding, long-duration welding applications. Key Features Water-Cooled Design – Keeps the torch cooler for extended use at higher amperages, reducing operator fatigue. Compact & Lightweight – Provides excellent maneuverability without compromising durability. WP20 Series Compatible – Direct replacement for standard WP20 TIG torch setups. Professional Quality – Manufactured by Starparts, ensuring reliability and long service life. Applications Stainless steel TIG welding High-duty cycle applications Pipework and tube welding Aerospace, fabrication, and heavy-duty production welding  What’s Included 1 × WP20 Rigid Head Water-Cooled TIG Torch Body (handle, consumables, and accessories sold separately) Why Choose the WP20? Designed for welders who demand high performance and flexibility, the WP20 delivers control and dependable cooling. Whether you’re working on stainless steel, thin sheet, or heavy-duty projects, this torch body is engineered to perform.

Starparts WP20FX Flexi Head Water Cooled Replacement TIG Torch Body

WP20FX Flexi Head Water-Cooled Replacement TIG Torch Body The Starparts WP20FX Flexi Head TIG Torch Body is a premium water-cooled TIG solution designed for precision welding at higher amperages. Featuring a flexible head, this torch body gives welders exceptional control and comfort when working in tight spaces or on intricate joints. Its robust construction and efficient water-cooling system make it ideal for demanding, long-duration welding applications. Key Features Flexible Head – Adjusts effortlessly for improved torch positioning in confined or awkward areas. Water-Cooled Design – Keeps the torch cooler for extended use at higher amperages, reducing operator fatigue. Compact & Lightweight – Provides excellent maneuverability without compromising durability. WP20 Series Compatible – Direct replacement for standard WP20 TIG torch setups. Professional Quality – Manufactured by Starparts, ensuring reliability and long service life. Applications Stainless steel TIG welding High-duty cycle applications Pipework and tube welding Aerospace, fabrication, and heavy-duty production welding  What’s Included 1 × WP20FX Flexi Head Water-Cooled TIG Torch Body (handle, consumables, and accessories sold separately) Why Choose the WP20FX? Designed for welders who demand high performance and flexibility, the WP20FX delivers precise control and dependable cooling. Whether you’re working on stainless steel, thin sheet, or heavy-duty projects, this torch body is engineered to perform.

Starparts Black Premium Leather Hood

Starparts Black Premium Leather Welding Hood The Starparts Black Premium Leather Hood is a heavy-duty protective hood designed to shield the head, neck, and shoulders from heat, sparks, and spatter during welding, cutting, and grinding operations. Made from premium-grade split cowhide leather, this hood offers excellent flame and heat resistance, making it ideal for overhead or out-of-position welding tasks. Designed with comfort and durability in mind, the hood features reinforced stitching, a secure fit, and an open-face design to accommodate a welding helmet or safety goggles. It’s the perfect solution for welders working in confined spaces or hazardous environments where enhanced protection is essential. Key Features: Material: Premium split cowhide leather Colour: Black Coverage: Protects head, neck, shoulders, and upper chest Heat & Flame Resistant: Ideal for high-risk welding and cutting jobs Comfort Fit: Designed to be worn with welding helmets or goggles Durable Construction: Reinforced seams for long-lasting performance Ideal For: Overhead welding, confined spaces, and heavy-duty applications   When standard PPE isn’t enough, the Starparts Black Premium Leather Hood provides that extra layer of protection you can rely on in the toughest welding environments.

Starparts Black Premium Leather Trousers

Starparts Black Premium Leather Welding Trousers The Starparts Black Premium Leather Trousers are designed to provide superior lower-body protection in high-risk welding and metalworking environments. Constructed from durable, premium-grade split cowhide leather, these trousers deliver excellent resistance to heat, sparks, and abrasion—ensuring both safety and longevity on the job. Featuring a comfortable, practical design, the trousers include secure buckle fastenings and reinforced seams for heavy-duty use. Ideal for use alongside welding jackets or aprons, they are a trusted choice for professional welders and fabricators working in demanding conditions. Key Features: Material: Premium split cowhide leather Colour: Black Flame & Heat Resistant: Reliable protection from sparks and spatter Durable Construction: Reinforced stitching for extended wear life Adjustable Fit: Buckle or strap fastenings for a secure and comfortable fit Ideal For: MIG, TIG, stick welding, grinding, and general fabrication tasks   When safety and durability matter most, the Starparts Black Premium Leather Trousers are the dependable choice for full-leg protection in any welding environment.

Starparts Black Premium Leather TIG Gloves

Starparts Black Premium Leather TIG Gloves The Starparts Black Premium Leather TIG Gloves are engineered for precision, protection, and comfort—tailored specifically for the demands of TIG welding. Crafted from soft, high-grade goatskin leather, these gloves offer excellent dexterity and touch sensitivity, allowing for precise control during intricate welding tasks. Lightweight yet durable, the gloves are designed to protect against heat, sparks, and abrasion without compromising feel or flexibility. Reinforced stitching and a snug, ergonomic fit make them ideal for professional welders who require both protection and finesse. Key Features: Material: Premium black goatskin leather Welding Type: Ideal for TIG welding and precision work Superior Dexterity: Thin, supple leather for excellent control Comfort Fit: Soft lining with ergonomic shaping Durability: Reinforced seams for extended wear Heat & Spark Resistant: Suitable for low-heat applications   Perfect for workshop or site use, the Starparts Black Premium Leather TIG Gloves combine lightweight protection with premium feel—making them a must-have for serious TIG welders.

Starparts Black Premium Leather Welders Gauntlets 16"

Starparts Black Premium Leather Welders Gauntlets 16" The Starparts Black Premium Leather Welders Gauntlets – 16" are heavy-duty gloves designed to deliver superior protection, comfort, and durability in demanding welding environments. Made from high-quality split cowhide leather with a soft, heat-resistant lining, these gauntlets provide extended coverage for hands and forearms—making them ideal for MIG, stick, and general welding tasks. With reinforced stitching and a 16-inch length, these gloves offer excellent resistance to heat, sparks, and abrasion while allowing for good flexibility and control. The sleek black finish adds a professional look, suitable for both workshop and site use. Key Features: Length: 16" (long cuff for added forearm protection) Material: Premium split cowhide leather Lining: Soft, heat-resistant inner lining for comfort and insulation Heavy-Duty Construction: Reinforced seams and durable design Heat & Flame Resistant: Suitable for MIG, stick, and fabrication work Professional Appearance: Smart black finish with rugged build quality   Built for tradespeople who demand high-quality hand protection, the Starparts Premium Gauntlets combine strength, comfort, and reliability in one essential piece of PPE.

Starparts Black Premium Leather Jacket

Starparts Black Premium Leather Jacket – The Starparts Black Premium Leather Jacket – is a durable and stylish protective garment designed for serious welders and metalworkers. Crafted from high-quality, premium-grade split cowhide leather, this jacket offers exceptional resistance to heat, sparks, and abrasion—ensuring both safety and comfort in demanding work environments. With reinforced stitching and a robust front closure, the jacket provides reliable upper-body protection without sacrificing flexibility or movement. The smart black finish also gives it a professional appearance, suitable for workshop or site use. Key Features: Material: Premium split cowhide leather Heat & Flame Resistant: Ideal for MIG, TIG, and arc welding tasks Heavy-Duty Construction: Reinforced seams and secure press-stud closure Comfort & Fit: Ergonomic design with freedom of movement Professional Look: Smart black leather finish with rugged appeal   Whether you're on the shop floor or out on-site, the Starparts Premium Leather Jacket offers the protection and durability you need to get the job done safely and comfortably.

ESAB T2000 TIG Gauntlet Gloves

ESAB T2000 TIG Welding Gloves Precision Handling and Premium Protection for Professional TIG Welders The ESAB T2000 TIG Gloves are purpose-built for high-precision TIG welding applications, where dexterity, comfort, and sensitivity are critical. Engineered with professional welders in mind, these gloves offer exceptional feel and fingertip control, making them ideal for intricate welds on thin materials, stainless steel, or non-ferrous metals. Crafted from high-grade goatskin leather, the T2000 gloves provide a soft, supple feel while maintaining excellent resistance to heat, abrasion, and general wear. Goatskin is known for its fine grain and natural flexibility, which enhances the welder's tactile feedback—essential for maintaining steady torch control during long or delicate welds. The glove interior features a lightweight, unlined design to maximise touch sensitivity, allowing precise manipulation of filler wire and torch controls. The ergonomic cut and straight-thumb design promote comfort during extended welding sessions, while Kevlar® stitching ensures durability under high-heat conditions. Key Features: Premium Goatskin Leather: Soft and flexible for superior fingertip control and dexterity Unlined Interior: Enhances feel and control, perfect for fine TIG work Long Cuff Design: Provides additional forearm protection from radiant heat and spatter Ergonomic Fit: Tailored cut for reduced hand fatigue and improved torch handling Kevlar® Thread Stitching: High-temperature resistance for extended glove life Lightweight Construction: Ideal for extended wear without compromising performance Applications: TIG welding (DC and AC) Precision welding of stainless steel, aluminum, and exotic alloys Pipe and tube welding Automotive, aerospace, and stainless fabrication work Specifications: Material: Premium goatskin outer Lining: Unlined for maximum tactile sensitivity Stitching: Kevlar® thread for enhanced durability Compliance: EN 12477 (Type B), EN 388, EN 407 Sizes Available: Commonly sizes M–XL (availability may vary) The ESAB T2000 TIG Gloves are an excellent choice for welders who need reliable protection without sacrificing precision. Whether you’re on a production line or executing fine TIG work in the field, these gloves help you maintain control, comfort, and confidence.

ESAB Mig Welding Gloves M3050

ESAB M3050 MIG Welding Gloves - Professional-Grade Protection and Comfort for High-Performance MIG Welding The ESAB M3050 MIG Gloves are engineered to meet the rigorous demands of professional MIG welders, offering a blend of durability, comfort, and tactile control. Designed for extended welding sessions and high-heat environments, these premium gloves provide reliable protection without compromising on flexibility or fit. Constructed from high-quality cow split leather, the M3050 gloves offer excellent heat and abrasion resistance, making them ideal for heavy-duty MIG welding applications. Reinforced with additional leather in high-wear areas, they’re built to withstand daily use in demanding fabrication and industrial settings. Inside, the gloves are lined with a soft, flame-resistant cotton fleece, providing insulation against heat while ensuring wearer comfort. The ergonomic design allows for improved dexterity and hand movement, helping reduce fatigue and improve weld precision—especially during repetitive or complex tasks. Key Features: Durable Cow Split Leather: Tough exterior resists heat, sparks, and mechanical wear for long-term performance Fully Lined Interior: Soft, flame-retardant cotton fleece lining for comfort and thermal protection Reinforced Palm and Thumb: Added leather layers in critical areas for enhanced durability and grip Extended Cuff Length: Provides added forearm protection against spatter and radiant heat Ergonomic Fit: Pre-curved fingers and natural hand shape for better flexibility and control Stitched with Kevlar® Thread: Heat-resistant stitching ensures longer glove life under high-temperature conditions Applications: MIG/MAG welding General fabrication Industrial metalworking Workshop or on-site welding Specifications: Material: Cow split leather outer, cotton fleece inner Stitching: Kevlar® thread Size Range: M - XXL Standards Compliance: EN 12477 (Type A), EN 388, EN 407 Designed with the professional welder in mind, the ESAB M3050 MIG Gloves offer robust protection and superior comfort, making them an excellent choice for both workshop and field applications where reliability and feel are paramount.

Nylon Reinforced Clear Gas Hose Per Metre

Nylon Reinforced Clear Gas Hose  Ideal for making up welder gas hoses from machine to regulators Comes per metre order the amount you need 

Right Lines 6 Piece Welders Magnet Set

Right Lines Magnetic Set The welding magnets replace a third hand, help with simple, precise attachment and positioning, make welding work particularly convenient and clean. Contains 2 x 90 ° & 45° magnets with a lifting capacity weight of 11.KG 2 x 135° - 120° - 105° magnets with a lifting capacity weight of 11.KG 2 x 90° - 45° - 135° magnets with a lifting capacity weight of 4 KG This kit includes six powerful magnets that are perfect for your daily work needs. The magnets have a strong suction that allows you to work hands-free, making it fast, safe, and easy to clean. The angled design of the magnets can hold the blade and tube at 45°, 90°, 105°, 120° and 135° angles. The compact and small appearance of the magnets makes them easy to hold and store. These magnets are suitable for welding, marking, bracing, and positioning in pipe installation, among other scenarios.  

Starparts Welder's Chipping Hammer With Wooden Handle

Wooden Handle Chipping Hammer A durable chipping hammer with a wooden handle and double ended chipping head. Features a chisel end and a pointed tip to efficiently remove slag after welding.

Welder's Steel Chipping Hammer

Welders Chipping Hammer This tubular handled chipping hammer is ideal for chipping away any slag deposits after welding. It comes with a plastic stopper in the bottom of the hammer to protect the inside of the tube.

Dakota Chrome Leather Welders Jacket

Dakota Leather Welders Jacket • High quality leather 1.3mm thick split cow hide • Stand up collar • Outside pocket • Velcro & button fastening Order Code CJMED Medium 40” – 41” 100cm – 104cm CJLGE Large 42” – 44” 108cm – 112cm CJXLGE X-Large 46” – 48” 116cm – 120cm

Starparts Premium Gold Welding Gauntlets (16")

Starparts Premium Gold Welders Gauntlets 16" Features: Premium cow split leather Double kevlar stitched Reinforced palm and thumb Fully lined and fully welted Extra length cuff (16")

TIG Brush Spare Brush With Stainless Steel Ferrule M6 Thread Pack Of 10

TIG Brush Spare Brush – Stainless Steel Ferrule, M6 Thread (Pack of 10) The TIG Brush Spare Brush is a premium replacement accessory designed for TIG welding applications, providing precise cleaning and surface preparation for stainless steel, aluminum, and other non-ferrous metals. Each brush features a durable stainless steel ferrule and M6 threaded shank for secure attachment to compatible TIG brushes or welding tools. Supplied in a pack of 10, these spare brushes are ideal for workshops and fabrication environments, ensuring consistent performance and extended service life of your TIG cleaning tools. The stainless steel bristles deliver efficient oxide and contamination removal while preserving the integrity of the workpiece. Key Features: Pack of 10 TIG spare brushes – convenient for workshops and production Stainless steel ferrule – strong, durable, and resistant to corrosion M6 threaded shank – secure and easy attachment to TIG brushes High-quality bristles – efficiently remove oxide, scale, and contamination Maintains workpiece surface integrity – ideal for stainless steel and aluminum Applications: TIG welding surface preparation Oxide removal and cleaning of stainless steel and non-ferrous metals Workshop and industrial fabrication use Maintenance and tool replacement in welding environments

Furick Silicon Carbide #8 Gas Lens Body Cup Extreme Heat Rated

Furick Silicon Carbide #8 Gas Lens Body Cup – Extreme Heat Rated The Furick Silicon Carbide #8 Gas Lens Body Cup is designed for professional TIG welders who require superior heat resistance, excellent shielding gas coverage, and long-lasting performance. Manufactured from premium silicon carbide, this cup is built to withstand extreme temperatures and repeated thermal cycling, making it ideal for demanding welding applications where standard ceramic cups can fail. Designed specifically for use with gas lens collet bodies, the #8 cup provides a wider, more stable shielding gas envelope, allowing for improved weld quality, better visibility of the weld pool, and greater tungsten stick-out. This makes it an excellent choice for precision fabrication, stainless steel, titanium, and high-end TIG welding applications. Its durable silicon carbide construction offers exceptional resistance to thermal shock and cracking, ensuring a longer service life even during prolonged, high-amperage welding. Key Features Premium silicon carbide construction for exceptional durability. Extreme heat rated for prolonged high-amperage TIG welding. Designed for gas lens collet bodies. #8 cup provides enhanced shielding gas coverage. Allows increased tungsten stick-out for improved access and visibility. Superior resistance to thermal shock and cracking compared with standard ceramic cups. Ideal for precision, professional, and industrial TIG welding applications. Applications Stainless steel fabrication Titanium welding Mild steel welding Aluminium TIG welding Motorsport fabrication Aerospace engineering Pipe welding Precision fabrication Specifications Brand: Furick Material: Silicon Carbide Cup Size: #8 Type: Gas Lens Body Cup Heat Rating: Extreme Heat Rated Compatibility: Standard TIG gas lens collet bodies The Furick Silicon Carbide #8 Gas Lens Body Cup delivers exceptional durability, outstanding heat resistance, and superior gas coverage, making it the ideal choice for welders who demand consistent, high-quality results in the most challenging TIG welding environments.    

Furick Silicon Carbide #5 Collet Body Cup Extreme Heat Rated

Furick Silicon Carbide #5 Collet Body Cup – Extreme Heat Rated The Furick Silicon Carbide #5 Collet Body Cup is engineered for welders who demand exceptional heat resistance and consistent TIG welding performance. Manufactured from premium silicon carbide, this cup is designed to withstand significantly higher temperatures than traditional ceramic cups, making it ideal for high-amperage applications and prolonged welding sessions. Its compact #5 size provides excellent access to confined areas while delivering stable shielding gas coverage for clean, high-quality welds. The durable silicon carbide construction also offers superior resistance to thermal shock, helping to reduce cracking and extend the life of the cup in demanding workshop environments. Perfect for professional fabricators, pipe welders, motorsport, aerospace, and precision TIG welding applications. Key Features Premium silicon carbide construction for outstanding durability. Extreme heat rated for high-amperage TIG welding. Greater resistance to cracking and thermal shock than standard ceramic cups. Compact #5 cup size for improved access in tight spaces. Provides consistent shielding gas coverage for high-quality welds. Designed for use with standard TIG collet bodies. Ideal for professional and industrial TIG welding applications. Applications Stainless steel fabrication Mild steel welding Chromoly fabrication Motorsport and race fabrication Pipe welding Aerospace and precision engineering Specifications Brand: Furick Material: Silicon Carbide Cup Size: #5 Type: Collet Body Cup Heat Rating: Extreme Heat Rated Compatibility: Standard TIG collet bodies  

Portwest Navy FR53 Flame Resistant Anti-Static Winter Welders Overalls

This Winter FR Coverall is perfect for the demands of the offshore industry. Constructed with the same outer fabric as the FR50 and combined with a layer of insulation and FR cotton lining for extra warmth. Meeting all the required standards, features include triple stitched seams, concealed 2-way front brass zip and two front slant chest pockets with concealed brass zips.  The garment also has knee pad pockets designed with an innovative two tier adjustable system.   Features Protection against radiant, convective and contact heat FR cotton lined for added warmth and comfort Concealed brass zips on chest pockets Two back patch pockets Action back for extra freedom of movement Durable, strong and long lasting brass zip Concealed zip opening for added security Hook and loop cuffs for a secure fit Sleeve pocket Triple-stitched seams for extra durability Rule pocket CE certified Knee pad pockets to facilitate knee pads Premium sew on flame resistant reflective tape Two-way zip for quick and easy access Radio loops for easy clipping of a radio 40+ UPF rated fabric to block 98% of UV rays 10 pockets for ample storage Detachable hood CE-CAT III     Shell Fabric :   Bizflame Work: 99% Cotton, 1% Carbon Fibre 350g     Lining Fabric :   100% Cotton Flame Resistant Lining 170g     Filling Fabric :   100% Polyester Flame Resistant Filling 150g

Weld Star Weldstar E71T-GS Flux Cored Migwire 0.5KG 100MM Reel

Weldstar E71T-GS Flux Cored Migwire 0.5KG 100MM Reel Applications include auto body repairs, tanks, boiler and construction works, 100mm reel is designed for use on spool guns and smaller welders Features and Applications E71T-GS is a self-shielded all position flux cored welding wire for single pass applications. Designed for welding thin carbon and carbon-manganese steels. Offers smooth stable arc, low spatter, easy slag removal and excellent bead appearance. Vacuum-sealed aluminium foil packaging to prevent moisture absorption. Precision layer wound for superior wire feeding characteristics. Applications include auto body repairs, tanks, boiler and construction works. Test Certificates can be found online @wilkinsonstar247.com      Standards AWS A5.20 - E71T-GS   Chemical Composition % (Typical) C% S% Mn% P% Si% Ni % Al% 0.22 0.0010 0.91 0.012 0.25 0.011 1.78   Mechanical Properties (Typical) Tensile Strength ≥480 MPa   Yield Strength ≥400 MPa   Elongation -   Impact Strength -   Test Temperature -   Mechanical properties are approximate and may vary based on the heat, welding parameters and other factors.    Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

BÖHLER Bohler Phoenix Blau 30 E6013 Mild Steel Welding Electrodes

Skip to the beginning of the images gallery Bohler Phoenix Blau 30 6013 Mild Steel Welding Electrodes The Böhler Phoenix Blau 30 6013 is a versatile and reliable general-purpose mild steel electrode designed to deliver excellent results in a wide range of welding applications. These electrodes are particularly valued for their ease of use and exceptional performance, even in challenging conditions. Below are the key product benefits: Key Benefits Smooth and Stable Arc Delivers a consistent and smooth arc, making it easier to achieve high-quality welds with minimal spatter. Ideal for welders of all skill levels, from beginners to seasoned professionals. Excellent Weld Appearance Produces clean, visually appealing weld beads with uniform deposition. Minimal slag coverage that is easy to remove, saving time during post-weld cleanup. Versatile Application Suitable for welding mild steel in a variety of positions, including flat, horizontal, vertical, and overhead. Performs well on both AC and DC power sources, offering flexibility in different setups. High Efficiency Designed for high deposition rates, ensuring efficient use of electrodes and faster project completion. Ideal for light to medium fabrication work, including sheet metal welding and general repairs. Reliability in Challenging Conditions Capable of maintaining excellent performance on less-than-perfect surfaces, such as rusted or slightly dirty steel. Provides consistent results in varying conditions, ensuring reliability across different applications. Ease of Use Known for its user-friendly operation, making it a go-to electrode for workshops and fieldwork alike. Reduced operator fatigue due to its smooth arc and ease of handling. Applications General fabrication Automotive repairs Construction and maintenance Light structural welding Conformance: AWS A5.1-04: E6013En ISO 2560-A: E 42 0 RC 11Approvals: TÜV (00425.), DB (10.132.19), ABS, BV, LR, GL (2Y), DNV

Furick White & Black Shocker/TIG Nasty Glove With Velcro Cuff

Furick White & Black Shocker/TIG Nasty Glove With Velcro Cuff Furick White & Black Shocker / TIG Nasty Glove with Velcro Cuff The Furick White & Black Shocker / TIG Nasty Glove is designed by welders, for welders, delivering the perfect balance of comfort, protection, and dexterity. Ideal for TIG welding, this premium glove offers superior feel and control, allowing precise torch handling without sacrificing safety. Constructed from high-quality leather, it provides excellent durability and heat resistance, while the Velcro cuff closure ensures a secure, adjustable fit that stays comfortable during long welding sessions. The lightweight, flexible design reduces hand fatigue and makes it a go-to choice for professional fabricators and hobby welders alike. Key Features: Premium white & black leather construction – durable, heat-resistant, and built to last. Designed for TIG welding – superior fingertip control and sensitivity. Velcro cuff closure – secure, adjustable fit for all-day comfort. Lightweight and flexible – reduces fatigue and improves movement. Ideal for professional welders, fabricators, and workshop use.   The Furick TIG Nasty Glove with Velcro Cuff is the perfect choice for welders who demand high performance, maximum comfort, and reliability in every job. We Recommend this glove for your delicate Tig work being that it is nice and thin for ultimate dexterity. The Shocker series allows the welder to feel his work inputs as he strives for welding perfection

Nylon Reinforced Clear Gas Hose 30Mtr Reel

Nylon Reinforced Clear Gas Hose 30Mtr Reel Ideal for making up welder gas hoses from machine to regulators

Weld Star Weldstar Dual Core HF600-G MIG Wire 1.2MM - 15KG

Weldstar Dual Core HF600-G MIG Wire 1.2MM - 15KG Features and Applications Seamless high fill copper coated tubular wire for semi-automatic applications. Ideal for hardfacing components subject to abrasion and moderate impact. Unique welder appeal. Deposition rate increased by up to 20% when compared to solid wire. Martensitic weld metal contains finely dispersed hard carbides ensuring an optimal balance between abrasion, friction and impact resistance. Abrasion resistance at service temperatures up to 450°C. Preheat will be determined by the application and whether micro cracking in the deposit is acceptable. According to the base material preheating in the range 150°C - 300°C may be necessary. Precision layer wound for superior wire feeding characteristics. Typically used on bucket teeth, bucket lips, bulldozer blades, crusher jaws, scraper blades, chutes, pump housings, conveyor screws, slide plates, gear teeth, crusher hammers, drilling bits, ploughshares, reamers etc. Test Certificates can be found online @wilkinsonstar247.com    Standards EN ISO 14700 - T Fe2   Chemical Composition % (Typical) C% Mn% Si% P% S% Cr%  Ni% 0.5 1.2 0.6 0.010 0.013 5.7 0.05               Mo% Cu% Fe% Co% V% W%   0.80 0.10 Bal 0.006 0.010 <0.09     Hardness (HRC) Current Type Hardness - First Layer Hardness - Third Layer DC+ 52-55 54-57 DC- 55-57 57-60 Peak hardness in the range 50-62 HRC could be achieved in three layers. Direct polarity negative reduces dilution and favours higher hardness. Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Wear Type Suitability   Welding Parameters Ømm Current (A) Voltage (V) 1.20 mm 110-300 16-32   Shielding Gases EN ISO 14175 - M12, M20, M21   Welding Positions EN ISO 6947 - PA, PB

Starparts Gold Leather Welders Jacket

Starparts Gold Leather Welders Jacket Starparts leather protective clothing offers the welder stylish workwear which gives maximum comfort, fit and durablity for daily work demand

Parweld Panther Black Short TIG Glove

PARWELD Panther Black Short TIG Glove Raise your TIG welding with the PARWELD Panther Black Short TIG Glove, a premium hand protection solution crafted for welders who prioritize precision and comfort. Designed to meet the rigorous demands of welding and industrial applications, these gloves combine the durability of goat skin soft leather with the protection of a split leather cowhide cuff, all in a compact, short design that enhances control and flexibility. Supreme Comfort and Control The PARWELD Panther Black Short TIG Gloves are manufactured from high-quality goat skin soft leather, providing a supple feel for added comfort without sacrificing durability. The split leather cowhide cuff ensures robust protection for your wrists, while the glove’s overall soft leather construction allows for a close fit. This ensures maximum control over your welding equipment, enabling superior fingertip and positional control that is essential for precision TIG welding. Designed for the Professional Welder Available in sizes 7, 8, 9, and 10, these black TIG gloves are tailored to fit most hand sizes, offering an ideal solution for welders seeking a glove that supports fine work with excellent manoeuvrability. Whether you're working on intricate welds or require enhanced dexterity for long welding sessions, the PARWELD Panther Black Short TIG Glove delivers on both performance and comfort. Conformance to High Standards Adhering to the highest safety and quality standards, the PARWELD Panther Black Short TIG Glove meets BS EN 388:2016, A1:2018, BS EN 407:2020, BS EN 2477:2001, and BS EN ISO 21420:2020. These certifications assure welders of the gloves' capability to provide hand protection against mechanical risks, thermal risks, and more, making them a reliable choice for professional welding applications. Features and Benefits: Crafted from goat skin soft leather and split leather cowhide cuff for durability and wrist protection. Available in multiple sizes for a perfect fit, ensuring maximum control and comfort. Designed specifically for TIG welding, offering superior fingertip and positional control. Conforms to multiple European Standards, providing assured protection and quality. Ideal for welders who demand precision and comfort in their welding gloves.

Parweld Panther Black MIG Glove

Enhance Your Welding Precision with PARWELD Panther Black MIG Glove Step into the world of professional welding with the PARWELD Panther Black MIG Glove, a pinnacle of protection and performance for welders seeking the ultimate in hand safety and control. Designed for the rigors of MIG welding and industrial applications, these gloves combine advanced materials and ergonomic design to offer unparalleled comfort, durability, and control. Premium Materials for Superior Comfort and Protection Crafted from the finest goat skin soft leather, the PARWELD Panther Black MIG Gloves provide a soft, comfortable fit that doesn't compromise on protection. The addition of a split leather cowhide cuff extends the gloves' protective capabilities, shielding the wrist and lower arm from sparks and spatter. These gloves are not just protective gear; they're an extension of the welder's hand, allowing for precise control and finesse in welding tasks. Designed for Optimal Welding Performance With sizes ranging from 8 to 11, there's a perfect fit for every welder, ensuring close fit for maximum control over the welding gun. The gloves' superior fingertip and positional control enhance handling and manipulation of welding equipment, allowing for precise, clean welds every time. Whether you're a professional welder or a hobbyist, the PARWELD Panther Black MIG Gloves offer the control and protection you need to tackle any project. Conformance to Safety Standards Adhering to stringent safety standards, including BS EN 388:2016, A1:2018, BS EN 407:2020, BS EN 2477:2001, and BS EN ISO 21420:2020, the PARWELD Panther Black MIG Gloves are certified to protect against mechanical hazards, thermal risks, and more. These certifications underscore the gloves' reliability and safety, making them a trusted choice for welders in various environments. Features and Benefits: Manufactured from premium goat skin soft leather and split leather cowhide cuff for enhanced comfort and protection. Available in sizes 8, 9, 10, or 11, ensuring a perfect fit for every welder. Superior fingertip and positional control for precision welding. Conforms to multiple safety standards, offering comprehensive hand protection. Ideal for MIG welding and various industrial applications. Conforms To Standards: BS EN 388:2016 A1:2018 BS EN 407:2020 BS EN 2477:2001 BS EN ISO 21420:2020

Starparts Premium TIG Welders Glove With Fingertip Sensitivity

Precision Meets Protection: STARPARTS Premium TIG Welders Glove Elevate your TIG welding with the STARPARTS Premium TIG Welders Glove With Fingertip Sensitivity, designed for welders who prioritize precision and protection. Crafted from supple goat skin and featuring a 15cm cow split extra-long leather cuff, these gloves offer the perfect combination of dexterity and safety. The reinforced thumb and wrist patch provide additional durability and support, making these gloves an indispensable tool for professional welders. Unmatched Fingertip Sensitivity for Detailed Work The STARPARTS Premium TIG Welders Glove is engineered to enhance your control and sensitivity, allowing for meticulous welding work. The goat skin material not only ensures superior comfort but also gives you the tactile feedback necessary for precise welds. This makes them ideal for TIG welding, where precision is paramount. Extended Protection with Extra-Long Cuff Understanding the risks involved in TIG welding, these gloves come with a 15cm cow split leather cuff, extending the protective barrier well beyond the wrist. This extra length ensures your arms are safeguarded against sparks, spatter, and heat, providing peace of mind during welding operations. Enhanced Durability Where It Matters Most With reinforcements in critical areas such as the thumb and wrist, the STARPARTS Premium TIG Welders Glove is built to withstand the demands of welding work. These enhancements not only increase the glove's lifespan but also ensure consistent protection and performance over time. Features and Benefits: Made from premium goat skin for superior comfort and dexterity. 15cm extra-long cow split leather cuff for extended arm protection. Reinforced thumb and wrist patch for added durability and support. Designed specifically for TIG welding, offering exceptional fingertip sensitivity. It is ideal for welders seeking a balance of precision and safety in their welding gloves.

Furick Tri-Wave 2.4MM Rare Earth Tungsten Electrodes

Furick Tri-Wave 2.4mm Rare Earth Tungsten Electrodes Achieve exceptional arc stability and superior welding performance with Furick Tri-Wave 2.4mm Rare Earth Tungsten Electrodes. Developed for professional TIG welders, these premium rare earth electrodes deliver outstanding ignition, excellent arc control and long service life across a wide range of welding applications. Designed for use on both AC and DC TIG welding, Furick Tri-Wave electrodes provide reliable performance on mild steel, stainless steel, aluminium, titanium, nickel alloys and other weldable materials. Their advanced rare earth composition offers excellent current-carrying capacity, reduced tip degradation and consistent arc characteristics, making them an ideal all-purpose tungsten for fabrication, motorsport, aerospace, pipe welding and precision engineering. The 2.4mm diameter is one of the most versatile sizes available, suitable for medium to high amperage welding while maintaining precise arc control. Furick Tri-Wave electrodes are engineered to resist contamination and retain their point for longer, helping to reduce regrinding time, improve productivity and produce cleaner, more consistent welds. Trusted by professional welders worldwide, Furick products are renowned for their innovation and performance, making Tri-Wave electrodes an excellent choice for those demanding the highest standards of TIG welding. Features & Benefits Premium 2.4mm Rare Earth TIG tungsten electrodes. Suitable for both AC and DC TIG welding. Excellent arc starting and re-ignition characteristics. Stable, focused arc for improved weld quality. Reduced tip wear for longer electrode life. Performs exceptionally on aluminium, stainless steel, mild steel, titanium and nickel alloys. High resistance to contamination. Ideal for precision, fabrication and production welding. Suitable for professional workshop and industrial applications. Ideal Applications Aluminium TIG welding Stainless steel fabrication Mild steel fabrication Titanium welding Pipe welding Motorsport fabrication Aerospace engineering General fabrication and manufacturing Whether you're producing precision TIG welds or tackling demanding fabrication projects, Furick Tri-Wave 2.4mm Rare Earth Tungsten Electrodes provide the arc stability, durability and consistent performance needed to achieve professional-quality results every time.

Furick WP9/20 Pink Ceramic Cups Collet Body Mount

Furick WP9/20 Pink Ceramic Cups – Collet Body Mount Torch Compatibility: WP9 / WP20 / WP25 Mount Style: Standard Collet Body (non-gas lens) Material: High-strength pink ceramic Application: General TIG welding – steel, stainless, chromoly, aluminum Product Overview The Furick WP9/20 Pink Ceramic Cups – Collet Body Mount are designed for TIG welders using standard collet body setups (not gas lens). These high-quality cups offer excellent arc stability, good puddle visibility, and thermal durability, making them ideal for a variety of welding applications where gas lens performance is not required. These cups are perfect for welders who prefer or require a traditional collet body configuration on their WP9 or WP20 series torches. Key Features Standard Collet Body Mount Design Compatible with traditional collet and collet body setups—no gas lens required. Ideal for straightforward TIG welding operations or where gas lens kits are unavailable. Durable Pink Ceramic Manufactured from high-purity alumina ceramic with enhanced thermal resistance and mechanical strength, built to withstand regular use in shop or field conditions. Versatile Cup Sizes Typically available in #4 through #8 (1/4" to 1/2" orifice), giving you control over shielding gas coverage and access to different joint configurations. Reliable Arc Focus The ceramic structure helps channel shielding gas efficiently over the arc and weld zone, improving arc focus and reducing oxidation. Technical Specifications AttributeValue Material Alumina pink ceramic Mount Type Standard collet body (non-gas lens) Torch Series WP9 / WP20 / WP25 air-cooled Cup Sizes #4 to #8 (varies by kit/stock) Amperage Range Up to ~180 A (air-cooled torch) Applications TIG welding of mild steel, stainless steel, aluminum, and chromoly Fabrication shops, motorsport builds, exhaust and roll cage work Ideal for welders without a gas lens setup or where stubby kits aren't required Benefits   Easy installation with standard collet bodies—no torch modifications needed Durable and affordable for everyday welding tasks Allows consistent gas coverage for cleaner welds Compatible with multiple cup sizes for flexibility

Furick WP9/20 Pink Ceramic Gas Lens Cups

Furick WP9/20 Pink Ceramic Gas Lens Cups Compatible with: WP9, WP20, and other small-body TIG torches (9/20 series) Cup Type: Gas Lens Ceramic Color: Pink Application: Precision TIG welding – stainless steel, titanium, mild steel, chromoly, aluminum Product Overview The Furick WP9/20 Pink Ceramic Cups are high-performance gas lens cups designed for precision TIG welding applications. Known for their excellent gas coverage, thermal durability, and wide visibility of the weld puddle, these cups are a must-have for welders using WP9 or WP20 series torches—especially in stainless steel and exotic material work. Key Features Premium Pink Ceramic Construction Offers excellent thermal resistance and mechanical strength for long-lasting use under demanding TIG conditions. Optimized for Gas Lens Setups Designed specifically for use with gas lens collet bodies, enabling superior shielding gas flow and puddle coverage, especially in stainless and reactive metal welding. Enhanced Gas Coverage Helps achieve laminar gas flow across the weld zone—reducing oxidation, contamination, and improving overall weld quality. Stubby Gas Lens Compatibility These cups pair well with stubby gas lens kits, ideal for tight-access TIG applications and improved torch balance. Wide Range of Sizes Commonly available in cup sizes #4 through #8 (and sometimes larger), offering options based on joint access, amperage, and gas flow needs. Technical Specifications AttributeValue Material Alumina pink ceramic Cup Sizes #4, #5, #6, #7, #8 (varies by set) Torch Fitment WP9, WP20, WP25 (9/20 series) Use with 45V44, 45V43, 45V42, or stubby lens kits Max Amperage Up to 200 A (air-cooled systems) Applications TIG welding of stainless steel, titanium, Inconel, and mild steel Fabrication, exhaust work, aerospace, and food-grade pipe welding Ideal for low-current, precision work where clean welds and shielding are critical Benefits   Superior shielding gas control over standard cups Improved arc stability and puddle visibility Compatible with Furick and most universal stubby lens kits Helps reduce rework due to oxidation or arc wander Durable and cost-effective for daily professional use

Blue Demon Welding Products Blue Demon Gamechanger Multi Pad

Transform Your Welding Experience with Blue Demon Gamechanger Multi Pad Introducing the Blue Demon Gamechanger Multi Pad, a versatile and innovative solution designed to enhance the protection and comfort of welders across the globe. This multi-functional pad, crafted from the proprietary Kagan fabric known for its extreme heat resistance, is a testament to Blue Demon's commitment to safety and innovation. Whether you're looking to upgrade your non-Gamechanger gloves or need additional protection for various parts of your hand and arm, the Gamechanger Multi Pad is your go-to accessory. Versatile Design for Comprehensive Protection The Blue Demon Gamechanger Multi Pad is engineered to adapt to your specific needs, featuring three integrated pockets that allow for varied uses. Whether you need to shield one finger, two fingers, your whole hand, the side of your hand, or even your under elbow, this pad provides the flexibility to protect against extreme heat in any situation. Its one-size-fits-most design ensures that every welder can benefit from this exceptional level of protection. Unmatched Heat Resistance Made entirely from 100% Kagan heat shield fabric and reinforced with Kevlar stitching, the Gamechanger Multi Pad offers unparalleled resistance to the intense heat encountered during welding. This innovative material not only protects against heat but also enhances the longevity and durability of whatever glove it is paired with, making it an essential tool for welders who face high-temperature environments regularly. Features and Benefits: Proprietary Kagan fabric construction for extreme heat protection. Versatile design with three integrated pockets for multiple protective uses. Kevlar stitching for enhanced durability and heat resistance. One size fits most, ensuring wide accessibility and usability. It can be added to any non-Gamechanger glove, transforming it into a heat-resistant fortress.

Furick Shocker/TIG Nasty TIG Gloves Short Velcro Cuff

Precision Meets Durability: FURICK Shocker/TIG Nasty TIG Gloves Elevate your TIG welding with the FURICK Shocker/TIG Nasty TIG Gloves Short Velcro Cuff, a masterpiece of design and functionality. Tailored for welders who demand both precision and durability, these gloves combine the best of FURICK's innovative engineering with the needs of the welding professional. Experience unmatched dexterity and protection, allowing you to focus on the finesse of feeding filler rod and executing perfect welds. Premium Construction for Enhanced Performance Crafted entirely from full goatskin leather, the FURICK Shocker/TIG Nasty series gloves boast superior softness and flexibility without sacrificing strength. The use of Kevlar stitching not only adds to the durability but also ensures the gloves can withstand the high temperatures and rigorous demands of TIG welding. The addition of a Velcro strap provides a secure fit, while the padded palm and doublers in key areas offer both comfort and extra protection where it's needed most. Designed for Dexterity and Comfort These gloves are engineered to enhance your welding precision. The dexterous design and the tactile feel through the fingertips make them ideal for delicate tasks such as feeling and feeding filler rod. Whether you're working on intricate projects or need reliable protection for long welding sessions, the FURICK Shocker/TIG Nasty gloves are up to the task. Features and Benefits: Constructed with premium goat leather for maximum flexibility and durability. Kevlar stitching for superior heat resistance and longevity. Velcro cuff for a secure and adjustable fit. Padded palm and doublers in key areas for added protection. Designed for optimal dexterity, perfect for precise control and filler rod feeding. Available in sizes XS to XXL to fit every welder.

Furick SSBBW Ceramic TIG Cup Size #19

Furick SSBBW Ceramic TIG Cup Size #19 The Furick SSBBW Ceramic TIG Cup Size #19 is a premium large-diameter ceramic nozzle designed to provide exceptional shielding gas coverage for high-quality TIG welding applications. Engineered for use with Furick gas lens systems, the #19 cup delivers an expansive gas envelope, making it ideal for welding stainless steel, aluminium, titanium and other materials where superior weld appearance and contamination protection are essential. Manufactured from high-quality, heat-resistant ceramic, the SSBBW cup is built to withstand the demands of professional fabrication while maintaining excellent durability and consistent performance. Its large bore design allows greater shielding gas coverage, helping to minimise atmospheric contamination, improve weld quality and produce clean, aesthetically pleasing welds, particularly on critical joints and high-specification fabrications. Favoured by professional TIG welders, motorsport fabricators and precision engineers, the Furick SSBBW Ceramic TIG Cup Size #19 is particularly suited to applications requiring extended tungsten stick-out and improved visibility of the weld pool when used with a compatible gas lens setup. Features & Benefits Premium #19 ceramic TIG cup. Designed for use with compatible Furick gas lens systems. Provides exceptional shielding gas coverage. Large bore design for improved weld protection. Ideal for extended tungsten stick-out applications. Manufactured from durable, heat-resistant ceramic. Produces cleaner welds with reduced risk of contamination. Excellent visibility of the weld pool for improved control. Suitable for stainless steel, aluminium, titanium and other TIG weldable materials. Ideal for professional fabrication, motorsport and precision welding. Ideal Applications Stainless steel TIG welding Aluminium fabrication Titanium welding Food-grade and hygienic fabrication Pipe welding Motorsport fabrication Aerospace engineering Precision TIG welding Whether you're fabricating stainless steel pipework, welding aluminium components or producing high-end TIG welds, the Furick SSBBW Ceramic TIG Cup Size #19 delivers the superior gas coverage and weld quality trusted by professional welders around the world. THE SSBBW  will need 35-50 CFH of Argon Recomended for Titanium , Inconel and Stainless Steel Mounts on a 45V44  for a 9/20  size Torch or 17 Torch Mount Kit  for a 17 Torch

Blue Demon Welding Products Blue Demon Ace-Wipes Industrial Acetone Wipes PK Of 20

Blue Demon Ace-Wipes – Industrial Acetone Wipes (Pack of 20) Fast-Acting, Heavy-Duty Cleaning Wipes for Welding, Fabrication & Surface Prep The Blue Demon Ace-Wipes are powerful, pre-saturated industrial wipes formulated with high-purity acetone to deliver fast and effective cleaning in demanding welding and fabrication environments. Supplied in a convenient pack of 20, these heavy-duty wipes are ideal for preparing metal surfaces before welding, removing oils, adhesives, ink, paint, or resin, and cleaning tools or components on the go. Engineered for professionals, each Ace-Wipe is low-linting, tear-resistant, and saturated with just the right amount of acetone to ensure maximum cleaning power without excessive wetness or streaking. Their compact format makes them ideal for on-site use, toolboxes, welding bays, or mobile service vehicles—ensuring you're always prepared for quick, efficient surface prep or cleanup. Whether you're degreasing stainless steel before TIG welding or cleaning down equipment at the end of the day, Blue Demon Ace-Wipes help maintain high standards of cleanliness and weld quality. Key Features: Industrial Strength Acetone Formula: Removes oils, adhesives, ink, paint, grease, resin, and more Low-Lint, Tear-Resistant Wipes: Durable and clean for critical surface preparation Ready-to-Use Format: No need for bottles, sprays, or loose cloths—just grab and wipe Compact & Portable: Ideal for welders, engineers, and technicians working on-site or in workshops Quick Evaporation: Leaves minimal residue; perfect for prep before welding, painting, or bonding Pack Size: 20 pre-saturated wipes per resealable pack to maintain freshness and effectiveness Applications: Surface cleaning before welding, bonding, or finishing Removal of grease, ink, paint, adhesives, or marker lines Cleaning tools, stainless steel, workpieces, and jigs Ideal for fabrication shops, maintenance crews, and fieldwork Important Note: Always use in a well-ventilated area. Acetone is flammable—keep away from sparks, heat, and open flames. Wear gloves when appropriate and follow your site’s safety protocols. For welders and fabricators who value speed, precision, and cleanliness, Blue Demon Ace-Wipes are a must-have addition to any workshop or welding kit

Blue Demon Welding Products Blue Demon Gamechangers Shorties TIG Welding Glove

Revolutionize Your Welding Experience with Blue Demon Gamechangers Shorties Step into the future of welding protection with the Blue Demon Gamechangers Shorties TIG Welding Glove. Crafted for welders who demand both precision and protection, these gloves are lauded as "Quite possibly the best welding glove ever made!™". The Gamechangers Shorties are designed to transform your welding sessions into an experience of unparalleled comfort, dexterity, and safety. Premium Construction for Ultimate Protection Made from 100% premium goat leather and stitched with Kevlar®, the Blue Demon Gamechangers Shorties offer a robust defense against the hazards of TIG welding. The gloves feature a short, elastic cuff, ensuring they are easy to slip on and off while providing a secure fit that keeps sparks and heat at bay. This design choice maximizes your efficiency and safety, making glove changes quick and effortless. Enhanced Dexterity and Heat Resistance Liner-free for maximum dexterity, these gloves allow for intricate work without compromise. The dual layer of proprietary Kagan™ fabric on the pinky and side of the hand offers extreme heat protection, enabling you to handle high temperatures with confidence. This advanced material combination ensures that your hands are protected from heat, sparks, and abrasion, all while maintaining the tactile sensitivity crucial for TIG welding. Features and Benefits: Crafted from 100% premium goat leather for durability and comfort. Kevlar® stitched for superior strength and heat resistance. Short, elastic cuff for ease of use and optimal fit. Liner-free design for enhanced dexterity and control. Dual layer of Kagan™ fabric for unmatched heat protection in critical areas.

Blue Demon Welding Products Blue Demon Gamechangers Heavy-D's TIG Welding Gloves

Elevate Your Welding with Blue Demon Gamechangers Heavy-D's TIG Gloves Discover the pinnacle of welding glove innovation with the Blue Demon Gamechangers Heavy-D's TIG Welding Gloves. Engineered for the elite welder who seeks unparalleled protection, dexterity, and durability, these gloves are celebrated as "Quite possibly the best welding glove ever made!™". Embrace the craftsmanship and technology of the Blue Demon Gamechangers Heavy-D's and transform your welding experience. Unmatched Protection with Premium Materials The Blue Demon Gamechangers Heavy-D's are meticulously crafted from 100% premium goat leather, offering a perfect balance of softness and strength. The gloves are fortified with a Kevlar® stitched cuff, creating a formidable barrier against sparks and heat intrusion. This, combined with the added heat protection of the Kevlar® cuff and A6 lining, ensures your hands are shielded from the intense temperatures of TIG welding. Advanced Heat Defense System Equipped with a dual layer of proprietary Kagan™ fabric on the pinky and side of the hand, the Blue Demon Gamechangers Heavy-D's offer extreme heat protection where you need it most. This innovative feature ensures that even in the most demanding welding conditions, your hands remain cool and protected, enabling you to focus on precision welding without distraction. Features and Benefits: Crafted from 100% premium goat leather for superior durability and comfort. Kevlar® stitched cuff to prevent sparks and heat from entering the glove. Enhanced wrist protection with a Kevlar® cuff for added heat resistance. Kevlar® A6 lining for comprehensive heat protection throughout. Dual layer of Kagan™ fabric for unparalleled heat defense on critical areas.      

Parweld Panther Fingertip Sensitivity TIG Welding Glove

Precision Welding with PARWELD Panther Fingertip Sensitivity TIG Welding Glove Unlock the potential of precision TIG welding with the PARWELD Panther Fingertip Sensitivity TIG Welding Glove, a premium choice for welders who value both protection and precision. Crafted from the finest goat skin leather, these gloves offer unparalleled flexibility and sensitivity, allowing for meticulous control over your welding work. Part of the esteemed Panther range and available in size 10, these gloves are designed to meet the needs of professional welders demanding the highest standards of safety and performance. Superior Material for Enhanced Dexterity The use of goat skin leather in the PARWELD Panther TIG Welding Gloves ensures a superior level of dexterity and comfort. This material is not only soft and flexible but also provides excellent resistance to heat, making it ideal for TIG welding applications where precision is paramount. The natural properties of goat skin allow for enhanced fingertip sensitivity, enabling welders to perform detailed work with greater accuracy and control. Optimized for TIG Welding TIG welding requires a fine touch and precise control over the welding equipment, and the PARWELD Panther Fingertip Sensitivity TIG Welding Glove is specifically designed to support this requirement. The glove's construction focuses on maximizing the welder's ability to handle welding rods and adjust settings with precision, ensuring that each weld is performed with the utmost accuracy. Features and Benefits: Made from high-quality goat skin leather for exceptional flexibility and heat resistance. Designed for TIG welding, offering superior fingertip sensitivity for precision work. Part of the Panther range, signifying premium quality and durability. Size 10 for a comfortable fit that accommodates most hand sizes. It is ideal for professional welders who require the best in safety and dexterity.

Parweld Panther MIG Gauntlet

Starparts Red Welders MIG Gauntlet

Starparts Red Welders MIG Gauntlet The Starparts Red Welders MIG Gauntlet is a durable, heavy-duty welding glove designed to provide excellent protection, comfort, and flexibility during MIG welding and general fabrication work. Manufactured from premium split cowhide leather, these gauntlets offer outstanding resistance to heat, sparks, spatter, and abrasion, making them ideal for demanding workshop and industrial environments. Featuring a soft cotton-lined interior for enhanced comfort, the gloves provide excellent insulation against heat while remaining flexible enough for improved torch control and handling of materials. Reinforced stitching with heat-resistant Kevlar® thread ensures long-lasting durability, even under frequent use in harsh welding conditions. The extended gauntlet cuff offers additional protection to the wrists and lower forearms from sparks, molten metal spatter, and radiant heat, making these gloves suitable for MIG welding, MMA (Stick) welding, grinding, fabrication, and general engineering tasks. Key Features: Premium split cowhide leather construction Excellent protection against heat, sparks and weld spatter Comfortable cotton-lined interior for all-day wear Reinforced with heat-resistant Kevlar® stitching Extended gauntlet cuff protects wrists and forearms Durable construction for long service life Excellent balance of protection, comfort and flexibility Ideal for MIG welding, MMA (Stick), grinding and fabrication work Specifications: Product Type: Welding Gauntlets Brand: Starparts Colour: Red Material: Split Cowhide Leather Lining: Cotton Stitching: Heat-Resistant Kevlar® Thread Cuff Style: Extended Gauntlet Applications: MIG Welding, MMA (Stick) Welding, Fabrication, Grinding, Engineering and General Workshop Use

Parweld Mesh Back Drivers Glove

Drive with Comfort and Protection: PARWELD Mesh Back Driver Glove Introducing the PARWELD Mesh Back Drivers Glove from the esteemed Panther brand, a perfect blend of durability, comfort, and breathability for professional drivers and operators. Designed with the demands of driving and operating machinery in mind, these gloves are crafted from premium cow grain leather, offering a superior grip and protection without sacrificing tactile sensitivity. Size 10 ensures a fit that is both secure and comfortable for most hands, making it an ideal choice for long hours behind the wheel or at the controls. Breathable Design for Enhanced Comfort Featuring a mesh back, the PARWELD Mesh Back Drivers Glove provides exceptional breathability, keeping your hands cool and comfortable even in warm conditions. This design allows for air circulation, reducing sweat and discomfort during extended use. Whether you're driving on the open road or operating heavy machinery, these gloves ensure your hands remain dry and comfortable throughout the day. Durable Cow Grain Leather for Optimal Protection Constructed with high-quality cow grain leather, the gloves offer excellent durability and protection. The material is chosen for its balance between flexibility and resistance to wear and tear, ensuring your gloves can withstand the rigours of daily use while providing a soft, comfortable fit. Cow grain leather also offers excellent grip, making it easier to control your vehicle or machinery with precision and confidence. Features and Benefits: Premium cow grain leather construction for durability and comfort. Mesh back design for superior breathability and comfort in warm conditions. Size 10 for a comfortable fit that suits most hand sizes. Excellent grip and tactile sensitivity for precise control. Ideal for drivers and machine operators in various industries.

Weldas Kevlar TIG Finger

Elevate Your Welding Precision with Weldas TIG Kevlar Finger Weldas TIG Kevlar Finger is an innovative accessory designed to enhance your welding experience by providing extra protection and stability during position welding. Perfect for professionals who demand precision and safety, this TIG finger is crafted from durable silica fabric and features a Kevlar construction for unbeatable heat resistance and durability. Whether tackling intricate welds or enduring long welding sessions, the Weldas TIG Kevlar Finger ensures your fingers are shielded from extreme heat and sparks. Advanced Protection and Stability The Weldas TIG Kevlar Finger is engineered to offer not just protection but also added stability for your welding tasks. Its design allows for a comfortable fit over your existing gloves, providing an extra layer of insulation against heat without sacrificing dexterity or control. The inclusion of a hook and loop feature ensures a secure fit, allowing you to maintain the precision of your welds in various positions without compromise. Durable Silica Fabric for High Heat Resistance Constructed with high-quality silica fabric known for its high heat resistance, this TIG finger protector is an essential tool for any welder working with TIG welding processes. The robust material withstands extreme temperatures, ensuring your skin is protected from the hazards of welding. Its durability and heat-resistant properties make it a reliable addition to your welding gear, designed to last through countless welding projects. Features and Benefits: Made from durable silica fabric with Kevlar construction for superior heat resistance. Provides extra protection and stability during position welding, enhancing safety and precision. Easy to use with a hook and loop feature for a secure, adjustable fit over welding gloves. Enhances the longevity of your welding gloves by acting as a protective barrier against heat and wear. This is essential for welders seeking to improve their welding technique and safety without compromising on control.

CK Worldwide CK 3 Series Complete Pyrex Gas Saver Cup Front End Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 3 series (CK17, CK18, CK26) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

CK Worldwide CK 3 Series Complete Pink Ceramic Cup Gas Saver Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 3 series (CK17, CK18, CK26) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

CK Worldwide CK 2 Series Complete Pyrex Large Diameter Cup Gas Saver Kit

The CK Large Diameter Gas Saver front end is used to provide an inert atmosphere for the welding of reactive metals such as titanium, molybdenum, nickel-based and aluminum based alloys, as well as non-reactive metals like stainless steel. This design is lightweight, allowing for operator comfort and accurate control. The front end also uses a clear Pyrex cup creating excellent visibility of the weld puddle. The clear cup features an inside diameter of 1 1/8" (28.57mm) which is the largest cup orifice available on the market today. This design offers a replaceable, interchangeable tungsten adapter; and a universal collet body, creating less inventory, and allowing inexpensive screen replacement. Tungsten stick-out can be up to 2" (50.8mm) in certain conditions. This kit allows welders to weld low amperage Titanium without a trailing shield. Great for tack welding outside of an inert chamber and repairs of small cracks. 2 Series Fits 9 & 20 Torch Models.

CK Worldwide CK 2 Series Complete Pyrex Cup Front End Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available.   Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 2 series (CK9, CK20) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body. Part # Description Quantity 2P8GS CK #8 Pyrex Cup - 2/3 Series Gas Saver, 12.7mm bore x 32.6mm length 1 2C040GS CK Wedge Collet - 2 Series Gas Saver, 1.0mm 1 2HSGS CK Standard Heatshield - 2 Series Gas Saver 1 2CBGS CK Standard Collet Body - 2 Series Gas Saver, One Size Fits All 1 TAS040GS CK Tungsten Adapter - 2/3 Series Gas Saver, 1.0mm 1

CK Worldwide CK 2 Series Complete Pink Ceramic Front End Gas Saver Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 2 series (CK9, CK20) or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

CK Worldwide CK230 Flexi Head TIG Torch Body 300A Watercooled

CK230 Flexi Head TIG Torch Body – 300A Water-Cooled The CK230 Flexi Head TIG Torch Body is a premium 300 amp, water-cooled TIG torch designed to deliver maximum performance and comfort in demanding welding applications. Part of CK Worldwide’s industry-leading TIG range, the CK230 combines high amperage capability with a flexible head design, giving welders exceptional control and access in tight or awkward spaces. Its flex-head allows the torch to be adjusted to the ideal angle for every joint, reducing operator fatigue and improving weld precision. The water-cooled design provides excellent heat dissipation, enabling continuous high-amperage welding without overheating or premature wear of consumables. Key Features: 300 A rating (DC) – reliable high-current performance for stainless steel, aluminium, and exotic alloys. Water-cooled construction – maintains lower operating temperatures for extended duty cycles and longer consumable life. Flexi head design – easily bends to reach difficult angles and confined weld areas. Lightweight and ergonomic – reduces operator fatigue during long weld runs. Compatible with a wide range of CK Worldwide accessories and consumables. Industry-standard connections for easy integration with most TIG welding setups. Ideal for professional fabricators, stainless specialists, and precision welding applications, the CK230 Flexi Head 300A Water-Cooled TIG Torch Body offers superior manoeuvrability, cooling efficiency, and weld quality.

Bessey Tools Bessey Welders Angle Mitre Clamp 120MM x 2 Box Section Max Input

Bessey Welders angle clamps WSM12 Automatic adjustment to workpieces of various thicknessesSturdy jaws and base plate made from high-quality cast ironThe copper-plated spindle prevents welding splatter from stickingPrecise 90 degrees -angles   Specs Weight (kg) 7.80 Current passage max. (mm) 100 Jaw height (mm) 61 Jaw length (mm) 120 Opening min/max (mm) 2 x 120

Bessey Tools Bessey Welders Angle Clamp 90MM x 2 Capacity

Bessey WSM-9 Welder’s Angle Clamp – 90° Precision Clamping for Welding & Fabrication Accurate and Secure Corner Clamping for Right-Angle Joints The Bessey WSM-9 Welder’s Angle Clamp is specifically designed to deliver fast, precise, and repeatable 90° clamping for a wide range of welding and fabrication applications. Engineered with professional welders and metalworkers in mind, this heavy-duty clamp allows for accurate alignment of materials at right angles, while keeping workpieces clear for welding thanks to its open corner design. Ideal for T-joints, miter joints, and box frame assemblies, the WSM-9 is a reliable and rugged workholding solution that increases efficiency, improves weld quality, and enhances repeatability during fabrication. Key Features: Precise 90° Clamping Perfect for creating square corners and right-angled joints with high accuracy in steel fabrication and welding setups. Open Corner Design Provides unobstructed access to the joint for tack or full welding without removing the clamp—ideal for efficiency and clean weld seams. Independently Adjustable Spindles Each clamping arm has its own spindle, allowing for secure clamping of different material thicknesses on both sides of the corner. Heavy-Duty Construction Made from durable cast iron and steel components, ensuring long service life in tough industrial environments. Self-Centering Action Automatically aligns workpieces with symmetrical clamping force, reducing the need for time-consuming setup adjustments. Technical Specifications: Clamping Angle: 90° Clamping Capacity: Up to 100mm (3.94”) Throat Depth: 75mm Material Compatibility: Round, square, or flat stock Spindles: Two independently adjustable screw spindles Material: Cast iron frame with precision steel spindles Weight: Approx. 4.5 kg Applications: Welding and metal fabrication Frame construction and square assembly Fixture building and structural alignment Suitable for steel, stainless, and aluminium components Perfect for workshops, maintenance teams, and production environments Why Choose the Bessey WSM-9 Angle Clamp? When precision and access matter, the WSM-9 is a game-changer. Designed to keep corners square while offering open access for welding, this clamp saves time, reduces material movement, and improves finished results. Whether you're working on frames, boxes, or structural components, the Bessey WSM-9 delivers strength, control, and accuracy every time.

Bessey Tools Bessey All Steel GS Classix Screw F Clamp

Bessey GS Classix All Steel Screw F Clamp Robust, Reliable Clamping Power for Everyday Workshop Use The Bessey GS Classix Screw F Clamp delivers dependable, high-strength clamping performance in a durable and ergonomic design. Engineered for demanding fabrication, welding, woodworking, and general workshop applications, this versatile clamp is constructed from fully tempered steel, providing excellent resilience, wear resistance, and long-lasting service life. With a clamping force of up to 5000N, the GS Classix ensures secure, slip-free holding for a wide range of materials and projects. Its fixed jaw and sliding arm are built for precision and strength, while the tommy bar handle allows easy, controlled application of clamping pressure without excessive effort. Key Features: High Clamping Force – Up to 5000N Delivers strong, secure clamping pressure ideal for demanding fabrication or assembly tasks. All-Steel Construction Fixed jaw and sliding arm are made from fully tempered steel for maximum strength and long service life under heavy use. Durable Surface Finish Zinc-coated parts resist rust and wear, even in tough shop conditions. Tommy Bar Handle Classic sliding pin design offers simple and efficient torque transfer, even in tight spaces. Ribbed Profile Rail Provides enhanced stability and helps prevent slippage under pressure. Non-Slip Pressure Pad Swivelling pressure pad adjusts to uneven surfaces and materials, enhancing versatility and grip. Technical Specifications (Typical Range): Clamping Force: Up to 5000N Clamping Capacity: Various sizes available (e.g. 200mm, 300mm, 500mm etc.) Throat Depth: Typically 100mm Material: Tempered steel Handle Type: Tommy bar Rail Profile: Ribbed for extra grip and alignment Ideal For: Welding and fabrication setups Joinery and woodworking Assembly and maintenance tasks Metal and plastic work Workshop and industrial use Why Choose the Bessey GS Classix? Backed by Bessey’s reputation for German engineering and quality, the GS Classix series combines affordability with exceptional performance and durability. Whether you're clamping during tack welding, gluing in carpentry, or holding components in place during assembly, this clamp offers reliable grip, easy handling, and rugged construction—making it a staple tool for professionals and DIY users alike.

Bessey Tools Bessey Clamp Quick Ratchet Lever Clamp

Bessey All Steel Lever Clamp Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy to handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GSH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.

Parweld Ski Type Welding Goggle Shade 5

Parweld Ski Type Welding Goggle Shade 5 – P3310 The Parweld P3310 Ski Type Welding Goggle is a lightweight and comfortable eye protection solution designed for light welding, brazing, gas welding, and oxy-fuel cutting applications. Featuring a wide-view, one-piece design with a soft moulded body, these goggles provide an excellent fit while offering reliable protection from sparks, spatter, and harmful optical radiation. Fitted with a Shade 5 spatter-resistant acetate lens, the P3310 offers clear visibility while reducing glare during gas welding and cutting operations. The panoramic "ski goggle" style design provides an exceptionally wide field of vision, allowing greater awareness of the work area without compromising protection. The soft PVC body forms a comfortable seal against the face, making the goggles suitable for extended periods of use in fabrication, maintenance, and engineering environments. Manufactured to meet BS EN 166:2002 and BS EN 169:2002 safety standards, the Parweld P3310 delivers dependable eye protection for professional tradespeople and DIY users alike. Key Features: Genuine Parweld Ski Type Welding Goggle Part Number: P3310 Shade 5 spatter-resistant acetate lens Wide panoramic field of vision Soft one-piece moulded PVC body for enhanced comfort Lightweight design for all-day wear Protects against sparks, spatter and optical radiation Ideal for gas welding, brazing and oxy-fuel cutting Manufactured to BS EN 166:2002 and BS EN 169:2002 standards Specifications: Product Type: Welding Goggles Manufacturer: Parweld Part Number: P3310 Lens Shade: Shade 5 Lens Material: Spatter-Resistant Acetate Frame Material: Soft PVC Standards: BS EN 166:2002, BS EN 169:2002 Applications: Gas Welding, Oxy-Fuel Cutting, Brazing, Heating and Light Welding Operations

Multi-Angle Welding Magnet (Pair)

Multi-Angle Welding Magnet (Pair) (Code: MISC0141) The Multi-Angle Welding Magnet Pair is an essential accessory for welders, fabricators, and DIY enthusiasts, offering secure and versatile support for holding materials in place. Designed for multi-angle applications, these magnets provide precise alignment and hands-free convenience, making them ideal for welding, soldering, and assembly tasks. Key features include: Multi-Angle Capability: Supports 30°, 45°, and 60° angles for various projects. Powerful Magnetic Hold: Ensures stability and accuracy during use. Durable Construction: Built to withstand tough workshop and industrial conditions. Convenient Pair: Includes two magnets for added versatility and efficiency

Flat French Chalk Stick Holder

The Soapstone Flat French Chalk Holder is a practical and durable tool designed to hold flat soapstone chalk securely, making it an essential accessory for welders, fabricators, and metalworkers. This holder ensures precision and convenience when marking metals for cutting, welding, or fabrication tasks. Key features include: Secure Grip: Holds flat soapstone chalk firmly in place for accurate markings. Durable Construction: Made from robust materials to withstand tough workshop conditions. Ergonomic Design: Easy to handle and use, improving workflow efficiency. Universal Compatibility: Fits standard flat French chalk for versatile use.

Markal Silver-Streak Welder's Pencil

Silver-Streak Welder's Pencil Introducing the Silver Streak Welder's Pencil: Precision Marking for Welding Professionals Precision and accuracy are the keystones of every successful weld, and the Silver Streak Welder's Pencil is designed to ensure just that. Crafted with the expertise of seasoned welders, this pencil is a must-have tool for any welding professional or enthusiast. Features: Durable Construction: Built to withstand the rigors of the welding environment, the Silver Streak Welder's Pencil features a rugged design that ensures longevity even in the toughest conditions. High-Visibility Marking: The bright silver color of the pencil ensures excellent visibility against various metal surfaces, allowing for precise marking and accurate alignment. Fine Point Lead: Equipped with a fine point lead, this pencil enables users to create sharp, clear lines with utmost precision, ensuring accurate cuts and welds every time. Versatile Usage: Whether marking metal sheets, pipes, or other welding materials, the Silver Streak Welder's Pencil delivers consistent performance across a wide range of applications. Comfortable Grip: Designed with ergonomics in mind, the pencil features a comfortable grip that reduces fatigue during prolonged use, enhancing overall efficiency and productivity. Applications: Welding layout and fabrication Metal cutting and shaping Pipe fitting and assembly Structural steel construction Automotive and marine fabrication HVAC installation and repair

Markal Red-Riter Welder's Pencil

Red Writers Welders Pencil The Red Writers Welders Pencil is the perfect tool for precise marking on metal surfaces. Designed specifically for welders and fabricators, this pencil provides a high-visibility mark that withstands heat, ensuring your guidelines remain intact during welding, cutting, or grinding processes. Key Features: High-Visibility Marking: The red lead creates sharp, clear lines on metal, making it easy to follow cutting or welding paths. Heat Resistant: Marks remain visible even under high temperatures, ideal for welding and fabrication work. Durable Construction: Built to withstand the rigors of industrial environments, ensuring consistent performance.

Tempilstik Temperature Indicator

Tempilstik Temperature Indicator The Tempilstik Temperature Indicator is a fast, accurate, and reliable method of measuring surface temperature before, during, and after welding, heat treatment, and fabrication processes. Trusted by welders, inspectors, and engineers worldwide, Tempilstik temperature crayons provide a simple visual indication when a specific temperature has been reached, helping to ensure compliance with welding procedures and quality standards. Each Tempilstik is formulated to melt instantly at its rated temperature, leaving a clear visual indication that the required surface temperature has been achieved. Unlike infrared thermometers, Tempilstik indicators are unaffected by surface finish, emissivity, or ambient conditions, making them ideal for use in demanding industrial environments. Available in a wide range of temperature ratings, Tempilstik indicators are widely used to verify preheat temperatures, interpass temperatures, post-weld heat treatment (PWHT), and equipment maintenance across fabrication, construction, power generation, oil & gas, shipbuilding, and heavy engineering industries. Key Features Accurate and reliable surface temperature indication. Instantly melts at the rated temperature for a clear visual result. Ideal for checking preheat, interpass, and post-weld heat treatment temperatures. No batteries or calibration required. Easy to apply directly to the workpiece. Unaffected by surface emissivity or lighting conditions. Available in a wide range of temperature ratings. Trusted by welding professionals and inspectors worldwide. Applications Welding preheat verification Interpass temperature monitoring Post-weld heat treatment (PWHT) Steel fabrication Pipe welding Structural engineering Pressure vessel manufacture Power generation Oil & Gas Shipbuilding Maintenance and repair Specifications Brand: Tempil Product Type: Temperature Indicator Stick (Tempilstik) Measurement Method: Melting point temperature indication Temperature Range: Available in multiple temperature ratings Application: Surface temperature verification Compliance: Widely used to support welding procedures and quality control requirements   Whether you're working to strict welding specifications or carrying out routine fabrication, the Tempilstik Temperature Indicator provides a dependable, easy-to-use solution for accurate surface temperature verification, helping ensure consistent weld quality and compliance with industry standards

Lincoln Electric Weldline TIG Flex Sensitive TIG Gloves

Achieve Precision with LINCOLN ELECTRIC Weldline TIG Flex Sensitive TIG Gloves Experience unparalleled dexterity and protection with the LINCOLN ELECTRIC Weldline TIG Flex Sensitive TIG Gloves, expertly crafted for welders who demand precision and safety in every weld. These gloves are designed to shield against the diverse risks associated with welding operations, including intense heat, electrical hazards, and molten metal splashes. Embrace the fusion of comfort, sensitivity, and durability for TIG and flame welding techniques, ensuring your hands are safeguarded while maintaining the tactile feedback essential for meticulous work. Advanced Protection Tailored for Welders Constructed from specially tested leather, these gloves offer robust thermal and electrical risk protection, classified as heat resistant. They boast the ability to withstand contact with a 100-degree hot object for up to 15 seconds, providing peace of mind in high-temperature conditions. The gloves achieve a perfect balance of safety features rated according to European Standards, including heat resistance (level 2), dexterity (level 5), abrasion resistance (level 2), and protection against molten metal splashes (level 3). Designed for Optimal Performance and Comfort The LINCOLN ELECTRIC Weldline TIG Flex Sensitive TIG Gloves are tailored for manual welding techniques that generate significant splashes and drops, specifically TIG and flame welding. Their construction adheres to the highest standards of personal protection equipment (CLASS 2), ensuring each pair of gloves meets rigorous criteria for thermal and electrical safety, as outlined by UNI EN 420: 2013+A1:2009, UNI EN 388: 2016, UNI EN 407: 2004, and UNI EN 12477: 2001+A1:2005. Features and Benefits: Superior heat and electrical risk protection, ensuring safety in extreme conditions. Unmatched dexterity (level 5) for precise control and tactile sensitivity during welding. Robust against abrasion and molten metal splashes, offering comprehensive hand protection. Adheres to European Standards for personal protection equipment, guaranteeing quality and reliability. Specially designed for TIG and flame welding, enhancing performance and safety.

Furick Stubby Wedge Collet For WP17,18,26 TIG Torches

Furick Stubby Wedge Collet for WP17, WP18 & WP26 TIG Torches The Furick Stubby Wedge Collet is precision-engineered to improve tungsten grip, electrical conductivity and arc stability in TIG welding applications. Designed specifically for WP17, WP18 and WP26 TIG torches, this high-performance collet offers superior reliability compared to standard split collets. Key Features & Benefits Wedge-style design for stronger, more consistent tungsten clamping Improved electrical contact for enhanced arc stability Stubby format allows better access in tight or restricted welding areas Reduces tungsten movement and vibration during welding Ideal for precision and high-amperage TIG applications Compatibility Suitable for WP17, WP18 and WP26 TIG torches Designed to work with Furick stubby TIG consumable systems Performance & Quality Manufactured to exacting standards, the Furick Stubby Wedge Collet provides repeatable performance and long service life. Its robust construction ensures dependable operation in demanding workshop and site conditions, making it a trusted choice for professional TIG welders. Applications   Stainless steel TIG welding Mild and carbon steel TIG welding Aluminium TIG welding *** For Use With Furick 17 Adaptor Kit Gas Lens Bodies ***

Furick BBW KOKN Ceramic TIG Cup Kit

Furick BBW Ceramic Cup Kit for 2.4mm The Furick BBW KOKN Ceramic TIG Cup Kit is a premium accessory set designed to deliver superior gas coverage and arc stability for precision TIG welding. Made from high-quality ceramic, the BBW (Big Bore Window) cup provides excellent durability, thermal resistance, and visibility, making it ideal for critical welds on stainless steel, titanium, and other sensitive materials.   Perfect for professional fabricators, stainless steel specialists, and those working in industries requiring ultra-clean welds, the Furick BBW KOKN Ceramic TIG Cup Kit ensures consistent performance, improved shielding, and extended service life. The Furick BBW ceramic cup threads on 45v44 gas lens if a welder has a 9, 20 torch and/or if one has 17, 18, 26 torches. Please purchase the adapter kit if the latter applies. This cup is recommended for DC applications and 3/32 tungsten only. This will provide excellent results with 30 CFH of argon flow.

Furick TIG Welding Starter Cup Kit for 9/20 Torches

Furick TIG Starter Kit for 9 and 20 Torches The Furick TIG starter kit is the ideal first stop for TIG welders who want to start using glass or ceramic cups, it includes a range of lenses, collets and cups including the Jazzy 10, Fupa 12 in ceramic and glass as well as a 10 pack of O-rings. This 29 piece kit is perfect for those who use the 9 and 20 torches. We also have 17,18 and 26 starter kits available here. 

CK Worldwide CK Standard 3 Series TIG Standard Collet Body Fits WP17,18 & 20 Torches

CK Standard 3 Series TIG Collet Body – Fits WP17, WP18 & WP26 The CK Standard 3 Series TIG Collet Body is a precision-engineered component designed to deliver reliable performance and optimal gas flow in TIG welding applications. Manufactured from high-quality copper alloy, it ensures excellent conductivity and heat dissipation for stable arc performance and extended consumable life. Compatible with WP17, WP18, and WP26 torch series, this standard collet body works with matching CK 3 Series collets and cups to provide a secure, consistent electrode setup. Ideal for professional TIG welders seeking dependable, high-performance consumables. Key Features: Genuine CK Worldwide replacement part Precision-machined copper alloy for maximum conductivity and durability Ensures stable gas flow and superior arc control Compatible with WP17, WP18 & WP26 TIG torches Works with all CK 3 Series collets and alumina cups Built for professional TIG welding applications Typical Applications: TIG Welding | Stainless Steel | Mild Steel | Aluminium | Exotic Alloys   Brand: CK Worldwide Series: 3 Series Fits: WP17, WP18, WP26 Torches Sold Singularly - If Packs Are Required Please Order In Quantities Of 5

Blue Demon Welding Products Blue Demon TIG Filler Rod Storage Holder

Blue Demon 36" TIG Rod Storage Tubes Keep your TIG filler rods organised, protected and easy to identify with Blue Demon 36" TIG Rod Storage Tubes. Designed to safely store 36-inch (914mm) TIG welding rods, these durable storage tubes help protect filler metals from moisture, dirt and contamination, ensuring they remain in optimum condition for high-quality welding applications. Manufactured from robust, impact-resistant plastic, Blue Demon storage tubes are ideal for workshop, fabrication and site use. The secure push-fit cap helps keep rods clean and dry during storage and transport, while the clear labelling area allows welders to easily identify filler rod types and grades, reducing the risk of material mix-ups. Suitable for storing a wide range of TIG filler materials, including stainless steel, mild steel, aluminium, nickel alloys and other specialist welding rods, these storage tubes are an essential accessory for maintaining an organised welding workspace. Features & Benefits Designed for storing 36" (914mm) TIG filler rods. Protects welding rods from moisture, dust and contamination. Durable, impact-resistant plastic construction. Secure push-fit end cap keeps contents safe during storage and transport. Clear labelling area for quick identification of filler rod type and grade. Helps prevent material mix-ups and cross-contamination. Ideal for workshop, fabrication, maintenance and site use. Suitable for stainless steel, mild steel, aluminium and specialist TIG filler rods. Lightweight and easy to carry. Ideal Applications TIG welding workshops Fabrication and manufacturing Pipe welding Stainless steel fabrication Aluminium welding Maintenance and repair Mobile welding engineers Whether you're storing fresh filler rods or transporting them between jobs, Blue Demon 36" TIG Rod Storage Tubes provide a simple and effective solution for protecting valuable TIG consumables and keeping your welding equipment organised ***These Come Complete With The Extension Piece For Use With UK Metric Length 1000mm(39")Filler Rod*** Order with our custom Tec Products filler wire tube divider to hold multiple thickness rods, click here for more information. 

CK Worldwide CK Standard Split Collet 3 Series Fits WP17, 18 & 26

CK Standard Split Collet 3 Series – Fits WP17, WP18 & WP26 The CK Standard Split Collet 3 Series is engineered for precision, durability, and optimal performance in TIG welding applications. Manufactured by CK Worldwide, these high-quality collets are designed to provide a secure grip on the tungsten electrode, ensuring stable arc performance and excellent current transfer. Compatible with WP17, WP18, and WP26 torch series, the split design allows for easy installation and consistent clamping pressure, reducing heat build-up and extending both collet and torch life. Ideal for professional TIG welders demanding reliability and consistency across a wide range of materials and applications. Key Features: Genuine CK Worldwide replacement part Standard split design for consistent electrode grip and easy fitment Provides excellent current transfer and arc stability Precision-machined copper alloy for superior conductivity and durability Compatible with WP17, WP18, and WP26 TIG torches Available in all common tungsten diameters Typical Applications: TIG Welding | Stainless Steel | Mild Steel | Aluminium | Exotic Alloys   Brand: CK Worldwide Series: 3 Series Fits: WP17, WP18, WP26 Torches   Available in the following sizes: 0.5MM 1.0MM 1.6MM 2.4MM 3.2MM 4.0MM Sold Singularly - If Packs Are Required Please Order In Quantities Of 5

CK Worldwide CK 3 Series TIG Standard Collet Body Alumina Cup WP17,18 & 26 Fitment

The CK 3 Series TIG Standard Collet Body Alumina Cup is a high-quality replacement TIG torch consumable designed for use with WP17, WP18 and WP26 series TIG torches fitted with a standard collet body setup. Manufactured from durable alumina ceramic, the cup is designed to withstand the high temperatures generated during TIG welding while directing the shielding gas around the tungsten electrode and into the weld area. Correct shielding gas coverage is essential for protecting the molten weld pool and tungsten electrode from atmospheric contamination. Replacing worn, cracked or damaged ceramic cups helps maintain reliable gas coverage and consistent TIG welding performance. The CK 3 Series fitment makes these cups suitable for the widely used WP17 air-cooled, WP18 water-cooled and WP26 air-cooled TIG torch platforms, making them an essential consumable for professional welding and fabrication workshops. Available in a range of cup sizes to suit different tungsten sizes, joint configurations, gas flow requirements and welding applications. Key Features Genuine CK Worldwide 3 Series TIG consumable Standard collet body alumina ceramic cup Compatible with WP17, WP18 and WP26 TIG torches Durable high-temperature alumina construction Directs shielding gas around the tungsten and weld pool Helps maintain consistent shielding gas coverage Suitable for standard collet body TIG torch setups Available in multiple cup sizes Quick and straightforward replacement Ideal for professional TIG welding and fabrication Useful replacement or workshop spare Torch Compatibility Suitable for compatible: WP17 TIG Torches WP18 TIG Torches WP26 TIG Torches CK Worldwide 3 Series compatible torch setups Typical Applications Ideal for: Mild steel TIG welding Stainless steel TIG welding Aluminium TIG welding Pipe and tube fabrication Automotive fabrication General engineering Maintenance and repair Precision TIG welding Specification Brand: CK WorldwideSeries: 3 SeriesProduct Type: TIG Torch Alumina CupMaterial: Alumina CeramicTorch Fitment: WP17, WP18 & WP26Configuration: Standard Collet BodyAvailable Sizes: Various Cup SizesApplication: TIG / GTAW Welding  

CK Worldwide CK Standard Split Collet CK 2 Series - Fits WP9 & 20 Torches

CK Standard Split Collet 2 Series – Fits WP9 & WP20 Torches The CK Standard Split Collet 2 Series is a high-quality, precision-engineered TIG consumable from CK Worldwide, designed to provide a secure grip and consistent electrical contact with the tungsten electrode. Its split design ensures even clamping pressure and reliable current transfer, resulting in a stable arc and improved weld quality. Manufactured from premium copper alloy for excellent conductivity and durability, this collet is compatible with all WP9 and WP20 torch series, as well as equivalent 2 Series TIG torches. Ideal for professional TIG welders requiring dependable performance and long service life. Key Features: Genuine CK Worldwide replacement collet Standard split design for secure tungsten clamping Ensures consistent current transfer and arc stability Precision-machined copper alloy for durability and conductivity Compatible with WP9 & WP20 TIG torches Works with all CK 2 Series collet bodies and cups Typical Applications: TIG Welding | Stainless Steel | Mild Steel | Aluminium | Titanium | Precision Fabrication   Brand: CK Worldwide Series: 2 Series Fits: WP9, WP20 Torches Fits All Standard WP9 & 20 TIG Torches Aswell As CK Branded Ones 0.5MM - 13N20 1.0MM - 13N21 1.6MM - 13N22 2.4MM - 13N23 3.2MM - 13N24  Sold Singularly - If Pack Sizes Are Wanted Please Order In Quantities Of 5

CK Worldwide CK 2 Series Standard Gas Lens Ceramic Cup

The CK Worldwide 2 Series Standard Gas Lens Ceramic Cup is a high-quality replacement TIG torch consumable designed for use with CK 2 Series, WP9 and WP20 TIG torches fitted with a compatible standard gas lens assembly. Manufactured from durable, heat-resistant alumina ceramic, these TIG cups are designed to withstand the demanding temperatures associated with TIG welding while helping direct shielding gas around the tungsten electrode and weld pool. When used with a suitable TIG gas lens collet body, the ceramic cup forms part of a shielding gas system that produces a smoother, more evenly distributed gas flow compared with a conventional standard collet body arrangement. This improved gas coverage can help protect the tungsten electrode and molten weld pool from atmospheric contamination, supporting cleaner welds and more consistent welding results. The CK 2 Series Gas Lens Ceramic Cup is particularly suitable for precision TIG welding applications where effective shielding gas coverage is essential, including stainless steel fabrication, pipe welding, automotive fabrication and general engineering. Available in a range of cup sizes to suit different welding applications, joint configurations and shielding gas requirements. Key Features Genuine CK Worldwide 2 Series TIG consumable Standard gas lens ceramic cup Compatible with WP9 and WP20 TIG torches using a suitable gas lens setup Manufactured from heat-resistant alumina ceramic Designed for use with standard 2 Series gas lens collet bodies Helps provide consistent shielding gas coverage Supports smoother gas distribution when used with a gas lens Helps protect the tungsten electrode and weld pool Suitable for precision TIG welding applications Available in various ceramic cup sizes Ideal replacement for worn, cracked or damaged TIG cups Suitable for professional welding and fabrication workshops Torch Compatibility Suitable for compatible: WP9 TIG Torches WP20 TIG Torches CK Worldwide 2 Series TIG Torches Other TIG torches using compatible 2 Series standard gas lens consumables Important: These cups are designed for standard gas lens configurations and are not necessarily interchangeable with standard collet body cups or larger-diameter gas lens systems. Typical Applications Ideal for: Stainless steel TIG welding Mild steel TIG welding Aluminium TIG welding Precision welding Pipe and tube fabrication Automotive fabrication Thin sheet metal welding General engineering Maintenance and repair Professional TIG fabrication Technical Specification Brand: CK WorldwideSeries: 2 SeriesProduct Type: TIG Gas Lens Ceramic CupMaterial: Alumina CeramicTorch Compatibility: WP9, WP20 & Compatible 2 Series TIG TorchesConsumable Configuration: Standard Gas LensAvailable Cup Sizes: Various, Depending on Selected OptionWelding Process: TIG / GTAWApplication: Shielding Gas Distribution & Weld Pool Protection

CK Worldwide CK 9 & 20 Medium Backcap With O-Ring

CK 2 Series - CK9 & 20 Medium Length Backcap Common Part Code - 41V35 The CK 9 / 20 Medium Backcap With O-Ring is a high-quality replacement component designed for TIG welding torches, ensuring a secure and reliable seal while protecting the tungsten electrode. Manufactured to precise industry standards, this backcap provides durability, heat resistance, and a tight fit for optimal performance. Key Features: Durable Construction – Made from high-quality heat-resistant materials for long-lasting performance in demanding welding applications. Secure O-Ring Seal – Includes a precision-fit O-ring to ensure an airtight seal, preventing gas leaks and enhancing torch efficiency. Medium-Length Design – Offers a balance between accessibility and control, making it suitable for a wide range of TIG welding applications. Compatible with CK 9 & CK 20 Series Torches – Designed to fit CK Worldwide 9 and 20 series TIG torches, ensuring a seamless replacement. Easy Installation – Simply screws into place for quick and hassle-free replacement, minimizing downtime. Ideal For: Professional welders and fabricators Industrial and precision TIG welding applications Automotive and aerospace welding DIY welding enthusiasts Why Choose CK Worldwide?   CK Worldwide is a trusted name in premium TIG welding equipment, known for innovation, quality, and precision. The CK 9 / 20 Medium Backcap With O-Ring ensures a reliable, leak-free fit, helping you achieve consistent and high-quality welds every time.

CK Worldwide CK17 TIG Torch With Superflex Cable

Introducing the CK17 Gas-Cooled 150amp TIG Torch: Your Ultimate Welding Companion The CK17 Gas-Cooled TIG Torch is a top-tier welding tool designed to meet your welding needs with precision and efficiency. Whether you're working with ACHF or DCSP at 100%, this torch delivers outstanding performance and versatility. Plus, it seamlessly accommodates all 3 Series torch head accessories (WP17, WP18, WP26), making it a must-have for any professional welder.   Why choose the CK17 TIG Torch? Worldwide Popularity: Renowned as the most favoured TIG torch globally, the CK17 is trusted by welders everywhere. Enhanced Heat Dissipation: The torch head is engineered with added mass, ensuring superior heat dissipation. This design enables you to work longer without overheating. Durable Brass Alloy Head: Crafted from a rugged brass alloy, the torch head minimises thread damage and resists galling and seizing compared to copper heads. Maximum Cooling: The torch features the largest metal head insert, guaranteeing maximum cooling and prolonging its lifespan. Heavy-Duty Construction: Built for endurance, this torch allows for extended welding sessions at 150 amps, making it perfect for demanding projects.   Experience Unparalleled Flexibility with CK's Superflex Cable: The CK17 TIG Torch comes fitted with CK's Superflex Cable, offering unparalleled benefits: Lightweight and Flexible: It boasts the lightest and most flexible cable assemblies available in the market. Say goodbye to cumbersome cables and enjoy increased manoeuvrability. Versatile Compatibility: Designed to fit both gas-cooled and water-cooled torches, this cable is a versatile solution for your welding setup. Durable Construction: The cable features a lightweight silicon rubber hose with nylon over braid protection, ensuring resistance to abrasion and longevity. Improved Range of Motion: Replacing heavy, stiff cables, the Superflex Cable lets you work comfortably and with precision, even in intricate welding applications. Cold Weather Resilience: No matter the temperature, this cable remains flexible, ensuring reliable performance even in the coldest environments.   Available in two length options, 4 meters (12 feet) and 8 meters (25 feet), both configurations come standard with a universal 3/8" connection for hassle-free setup. Elevate your welding experience with the CK17 Gas-Cooled TIG Torch and Superflex Cable – the perfect combination for achieving exceptional welding results.   ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch    Please note: There is no warranty on TIG welding torches unless there is a manufacturing defect.

Weld Test Plate Coupons

Weld Test Plate Coupons 200 x 30MM Perfect for setting up new welding plant, practice/training sessions or new welders learning the trade  these test plates are available in Mild steel, Stainless Steel and 1050 Grade Aluminium and are in packs of 10 Plates  the plates measure 200MM Long and 30MM High in either 2MM or 3MM thick 

Starparts Red 2% Thoriated Tungsten Electrodes

Starparts Red 2% Thoriated Tungsten Electrodes Starparts Red 2% Thoriated Tungsten Electrodes are premium-quality TIG welding electrodes designed to deliver excellent arc starting, superior arc stability, and long service life. Alloyed with 2% thorium oxide (ThO₂), these electrodes are ideal for DC TIG welding applications, offering outstanding performance when welding carbon steel, stainless steel, nickel alloys, titanium, copper, and other ferrous metals. Known for their excellent current-carrying capacity and resistance to contamination, 2% thoriated tungsten electrodes maintain a sharp point for longer, providing precise arc control and consistent weld quality. Their reliable performance makes them a popular choice for professional fabricators, maintenance engineers, pipe welders, and general engineering applications. Available in a range of diameters and supplied in convenient storage packs, Starparts Red 2% Thoriated Tungsten Electrodes are suitable for use with most DC TIG welding machines and are trusted for demanding industrial welding applications. Key Features: Premium 2% thoriated tungsten electrodes Colour coded red for easy identification Excellent arc starting and stability Ideal for DC TIG welding applications High current-carrying capacity Maintains a sharp point for precise arc control Long service life with excellent resistance to contamination Suitable for carbon steel, stainless steel, nickel alloys, titanium and copper Ideal for fabrication, pipe welding, maintenance and general engineering Specifications: Product Type: TIG Tungsten Electrode Brand: Starparts Tungsten Type: 2% Thoriated (ThO₂) Colour Code: Red Welding Current: DC Available Diameters: Various sizes available Applications: Carbon Steel, Stainless Steel, Nickel Alloys, Titanium, Copper and General Fabrication Important Safety Information:These electrodes contain thorium oxide, a naturally radioactive material. When grinding tungsten electrodes, always use suitable extraction or local exhaust ventilation (LEV) and wear appropriate respiratory protection to minimise exposure to grinding dust. Dispose of used electrodes in accordance with local regulations Ideally Suited To DC TIG Welding Applications Pack Of 10

Parweld Panther Pro Tig Glove

Parweld 600A Cast Brass Screw Type Earth Clamp

Parweld 600A Cast Brass Screw Type Earth Clamp The Parweld 600A Cast Brass Screw Type Earth Clamp is a heavy-duty welding earth clamp designed to provide a secure electrical connection for high-current welding applications. Manufactured from robust cast brass, this premium earth clamp offers excellent electrical conductivity, outstanding durability, and dependable performance in demanding industrial and fabrication environments. The screw-type design ensures a firm, reliable grip on the workpiece, helping to maintain consistent current flow while reducing electrical resistance and minimising arc instability. Its heavy-duty construction makes it ideal for use with MIG, TIG, MMA (Stick), and submerged arc welding equipment where high current capacity and a secure earth connection are essential. Suitable for professional welders, fabrication workshops, shipbuilding, structural steelwork, and general engineering, the Parweld 600A Earth Clamp is built to withstand daily use in the toughest working conditions. Key Features: Heavy-duty 600A current rating Durable cast brass construction for excellent conductivity Screw-type clamping mechanism for a secure electrical connection Provides reliable current transfer and improved arc stability Heavy-duty design for demanding industrial applications Suitable for MIG, TIG, MMA (Stick), and other welding processes Corrosion-resistant construction for long service life Ideal for fabrication, structural steelwork, maintenance, and general engineering Specifications: Product Type: Welding Earth Clamp Manufacturer: Parweld Current Rating: 600 Amps Material: Cast Brass Clamp Type: Screw Type Connection: Suitable for welding earth cables Applications: MIG, TIG, MMA (Stick), fabrication, construction, shipbuilding, heavy engineering and industrial welding

Parweld 400A Cast Steel Screw Type Earth Clamp

Parweld 400A Cast Steel Screw Type Earth Clamp The Parweld 400A Cast Steel Screw Type Earth Clamp is a heavy-duty grounding solution designed for reliable performance in demanding welding applications. Rated at 400 amps, this robust clamp ensures a secure and stable earth connection, helping to maintain consistent arc performance and welding quality. Manufactured from durable cast steel, the screw-type design provides a firm grip on the workpiece, reducing the risk of poor contact and electrical resistance. Ideal for workshop, site, and industrial use, this earth clamp is built to withstand tough working environments while delivering dependable conductivity. Key Features: 400 Amp rated earth clamp Heavy-duty cast steel construction Screw-type mechanism for secure attachment Provides stable and reliable grounding Suitable for MIG, TIG, and MMA welding applications Ideal for workshop and industrial use    

Parweld Flat Engineers French Chalk Stick Box Of 144

Box of French Chalk Stick Perfect for marking steel and all metal fabrication projects 144 Pcs  

Magnetic Multi-Angle - Large 5"(50Lb Capacity)

Large 5" Magnetic Welders Multi-Angle (Code: MISC0021) The Large 5" Magnetic Welder's Multi-Angle is a robust and versatile tool designed to securely hold workpieces in place during welding, cutting, or assembly tasks. With its powerful magnets and multi-angle functionality, it ensures precise alignment and hands-free operation for large-scale projects. Key features include: Powerful Magnetic Force: Provides a strong and reliable hold for heavy materials. Multi-Angle Support: Accommodates 45°, 90°, and 135° angles for versatile applications. Large and Durable Design: Built to handle demanding workshop and industrial tasks. User-Friendly: Easy to position and adjust for maximum efficiency.

Magnetic Multi-Angle - Small (25lb capacity)

Small 3" Magnetic Welders Angle The Small 3" Magnetic Welder's Angle is a versatile and reliable tool designed to hold materials securely in place during welding, cutting, or assembly tasks. Its compact 3-inch size and powerful magnetic force make it ideal for small to medium-sized projects, ensuring precise angles and hands-free operation. Key features include: Strong Magnetic Hold: Ensures stability and accuracy while working. Multi-Angle Support: Provides 45°, 90°, and 135° angles for various applications. Compact and Lightweight: Easy to position and store, perfect for tight spaces. Durable Construction: Built to withstand the demands of workshop and industrial use.  

Parweld Galvanising Spray 400ML

Parweld Galvanising Spray – 400ml Protective Zinc-Rich Coating for Rust Prevention and Metal Repair The Parweld Galvanising Spray (400ml) is a high-quality, fast-drying spray designed to provide a durable, zinc-rich protective coating on bare or rusted steel surfaces. Ideal for touch-ups, repairs, and maintenance, this spray mimics the galvanised finish, helping to prevent corrosion and extend the life of metal structures and components. Perfect for use in workshops, fabrication, construction, and maintenance, the spray forms a tough barrier that withstands harsh environmental conditions, including moisture and salt exposure. Key Features: Zinc-rich formula for effective corrosion protection Fast drying to touch in minutes and fully dry in hours Provides a smooth, galvanised finish similar to hot-dip galvanising Suitable for use on steel surfaces, welds, and metal repairs Resists moisture, rust, and weathering Convenient 400ml aerosol for easy application and precise coverage Typical Applications: Steel structures and frameworks Weld seams and joints Metal fences and gates Fabrication touch-ups and repairs Industrial maintenance and refurbishment Usage Instructions:   Shake can vigorously before use. Ensure the surface is clean, dry, and free from loose rust or contaminants. Spray from 20–30cm distance using even, sweeping motions. Apply multiple light coats if necessary, allowing drying time between coats. Allow full cure before handling or exposure to harsh environments.

Fronius Basic Leather Welding Jacket

BASIC LEATHER JACKET The functional leather welding jacket is made from split calf leather and manufactured in accordance with EN 11611: 2008-2-A1. The jacket features a button facing with Velcro fasteners.

BÖHLER Bohler Union 5356 ALMG5 Aluminium Tig Filler Rod 2.5KG

Böhler Union ALMG5(5356) Aluminium Magnesium TIG Filler Rods 5KG TIG welding rod for AlMg alloys containing up to 5 % Mg. High Strength: 5356 wire has relatively high tensile strength, making it suitable for applications where strength is a primary concern, such as in boat and shipbuilding, aerospace, and structural welding. Good Corrosion Resistance: This alloy offers good resistance to corrosion, which is vital for applications exposed to harsh environments, like marine or outdoor structures. Weldability: 5356 wire is known for its ease of use and smooth arc characteristics, making it suitable for both beginner and experienced welders. Low Melting Point: It has a lower melting point compared to some other aluminum alloys, which can help reduce the risk of burn-through or warping when welding thin aluminum materials. Anodizing Compatibility: 5356 aluminum is compatible with anodizing, which is a surface treatment process often used in various applications. Versatility: It can be used to weld various aluminum alloys, including 5052, 5083, 5086, 5154, and 6061. Spec: AWS A5.10 ER5356 Rod Diameter: 1.6mm, 2.4mm, 3.2mm Approvals: TÜV (2198.), DB (61.132.01)

BÖHLER Bohler QE 6013 RC Mild Steel Welding Electrode (Stick Rods) 5KG

Bohler QE 6013 Mild Steel Welding Rods 5KG The Böhler Q E 6013 RC Mild Steel Welding Electrodes are versatile E6013 rutile-cellulosic stick electrodes designed for general-purpose MMA welding of mild and unalloyed steels. Offering excellent weldability and reliable arc striking, these electrodes are an excellent everyday choice for fabrication, repair, maintenance, assembly and workshop welding. Their excellent gap-bridging characteristics also make them particularly useful for tack welding and joints with less-than-perfect fit-up.  

Parweld Panther Leather Welder's Jacket

PARWELD PANTHER LEATHER WELDERS JACKET Worn Over Garments To Protect Body and Arms From Sparks and Spatter Stand Up Collar Adjustable Wrists Inside Pocket Side Take Up Straps, Kevlar® Stitched 1.2mm Thick Cow Hide Parwelds Premium Leatherwear Range Split Cow Hide

Fronius Leather Welding Jacket Highend

The Fronius HighEnd leather welding jacket is made from a smooth, elastic calf leather and is manufactured to EN 11611: 2008-2-A1 standard. The button placket and stand-up collar can be closed with Velcro and the sleeves are equipped with elastic bands. The high-quality leather jacket is available in sizes S to XXXXXL.  

Parweld Canadian Rigger Gloves

Robust Protection with PARWELD Canadian Rigger Gloves Introducing the PARWELD Canadian Rigger Gloves from the Panther Premium Glove Range, a synthesis of durability, comfort, and safety for professionals in rigorous industries. Crafted from premium split pigskin with thoughtful reinforcements, these gloves are designed to withstand the demands of rigger work, providing superior hand protection without compromising on flexibility or comfort. Premium Split Pigskin for Enhanced Durability The choice of premium split pigskin for the main construction of the gloves offers exceptional durability and resistance to wear and tear. This material ensures longevity and consistent protection, making the PARWELD Canadian Rigger Gloves an ideal choice for handling heavy materials and equipment. Advanced Features for Comprehensive Protection Featuring a 50mm reinforced cuff with an incorporated vein patch, these gloves offer extended protection to the wrist and lower forearm, safeguarding against abrasions and impacts. The minimum palm thickness of 1.2mm ensures a robust barrier against hazards while maintaining dexterity. Additionally, the hi-viz strip on the knuckle protection enhances visibility and safety in low-light conditions, and the extra reinforcement around the thumb area provides increased support and durability where it's needed most. Comfort Meets Functionality Understanding the importance of comfort in work gloves, the PARWELD Canadian Rigger Gloves include cotton materials in their design for breathability and moisture absorption. This blend of pigskin and cotton ensures that the gloves are not only protective but also comfortable for all-day wear, even in challenging working conditions. Features and Benefits: Constructed from premium split pigskin for superior durability. 50mm reinforced cuff with vein patch for extended wrist protection. A hi-viz strip on knuckle protection for increased safety and visibility. Additional reinforcement around the thumb for enhanced durability. Part of Parweld's Premium Glove Range, symbolizing quality and reliability. It is ideal for rigger work and other demanding industrial applications.

Parweld Round Welding Goggles Flip Up

Parweld Flip Up Welding Goggles

Flip Up Welding Goggle Parweld’s range of protective eyewear offers the user a lightweight range whilst ensuring maximum comfort.

Parweld Panther Pro MIG Welding Gauntlet

PARWELD Panther Pro Mig Welding Gauntlet Introducing the PARWELD Panther MIG Gauntlet, a cornerstone of the Panther PRO Glove Range, designed for welders who require the utmost in safety, durability, and comfort. These gauntlets are engineered to withstand the rigours of the workshop, providing comprehensive hand protection for MIG welding applications. Crafted from A-grade cow grain leather, the Panther MIG Gauntlets offer a blend of toughness and dexterity, ensuring your hands stay protected without sacrificing the control needed for precise welding. Enhanced Protection for Welding Professionals Every aspect of the PARWELD Panther MIG Gauntlet is designed with the welder's safety in mind. The fully reinforced palm and thumb, along with reinforced fingers, offer superior protection against heat, sparks, and abrasion. The gloves are fully lined for additional insulation and comfort, featuring a minimum palm thickness of 1.2mm for durable yet flexible wear. The extra-length cuff (180mm) provides extended protection to the wrist and lower arm, further enhancing the glove's defensive capabilities. Premium Materials for Maximum Performance Manufactured from A-grade cow grain leather, the Panther MIG Gauntlets are not only durable but also provide a comfortable fit. This high-quality material ensures the gloves can endure the demands of daily welding, offering a reliable barrier against the hazards of the welding environment. The Panther PRO Glove Range is synonymous with quality and performance, making these gauntlets a trusted choice for professional welders. Features and Benefits: Fully reinforced palm and thumb for enhanced protection. Reinforced fingers for added durability against wear and tear. The fully lined interior provides heat protection and comfort during use. Extra-length cuff for superior protection of the wrist and lower arm. Crafted from A-grade cow grain leather for longevity and flexibility. It is ideal for MIG welding, offering a perfect combination of safety and dexterity.

Parweld Aluminised Hand Shield

Enhance Your Welding Safety with PARWELD Aluminised Hand Shield Introduce an extra layer of protection to your welding gear with the PARWELD Aluminised Hand Shield, a crucial addition for welders seeking comprehensive safety in intense working environments. This shield is part of Parweld's esteemed Panther Glove Range, designed to complement your welding gloves with added defence against reflected heat. Ideal for workshop use, the Aluminised Hand Shield is crafted to meet the high standards of hard-wearing welding safety equipment that Parweld is known for. Optimal Protection Against Reflected Heat The PARWELD Aluminised Hand Shield is specifically engineered to provide welders with additional protection from the hazards of reflected heat. Its aluminised surface reflects heat away, ensuring your hands and lower arms remain safe from the intense temperatures typically encountered during welding tasks. This shield is an indispensable tool for enhancing your safety and comfort, allowing you to focus on precision welding without the worry of heat-related discomfort or injury. Designed for Comfort and Ease of Use Featuring elasticated straps, the Aluminised Hand Shield offers a secure and comfortable fit for all users. These adjustable straps ensure the shield stays in place, providing reliable protection throughout your welding sessions. The ease of attachment and removal makes this shield a convenient and practical choice for welders who need to adapt to different tasks and environments quickly. Durable Construction for Long-Lasting Use Crafted with synthetic leather and an aluminised coating, the PARWELD Aluminised Hand Shield is built to withstand the demands of welding work. The durable materials ensure that the shield not only offers optimal protection but also maintains its integrity and protective qualities over time, making it a valuable investment for any welder. Features and Benefits: It provides additional protection against reflected heat, enhancing safety during welding. Elasticated straps ensure a comfortable, secure fit for all users. Part of the Parweld Panther Glove Range, designed for compatibility and enhanced protection. Made with synthetic leather and an aluminised coating for durability and heat resistance. It is ideal for workshop use, offering a practical solution for welders seeking extra heat protection.

Parweld Reversible MIG Gauntlets

Double the Durability with PARWELD Reversible MIG Gauntlets Unlock a new level of practicality and protection in your welding projects with the PARWELD Reversible MIG Gauntlets. Crafted for welders who demand both safety and efficiency in their gear, these gauntlets stand out with their innovative reversible design. Ideal for workshop use, PARWELD's dedication to durable welding safety equipment shines through with this versatile addition to any welder's arsenal. Innovative Reversible Design for Cost Efficiency The PARWELD Reversible MIG Gauntlets feature a unique reversible design, effectively doubling the life of the gloves and significantly reducing costs associated with frequent replacements. This thoughtful feature ensures that welders can maintain optimal protection and comfort without compromise, even in the most demanding welding environments. Uncompromised Protection with Double Kevlar® Stitching Constructed with double Kevlar® stitching, these gauntlets offer superior durability and resistance to heat and sparks. The minimum palm thickness of 1.2mm provides a robust barrier against the hazards of MIG welding while ensuring flexibility and control. Fully lined and welted, these gloves offer enhanced comfort and protection, making them a reliable choice for prolonged use. Durable Cow Split Leather Material Made from high-quality cow split leather, the PARWELD Reversible MIG Gauntlets are designed to withstand the rigours of welding work. The material's natural resistance to heat, abrasion, and wear ensures that welders are adequately protected, while the gloves' overall design promotes a comfortable fit. Features and Benefits: Reversible design for extended usability and cost efficiency. Double Kevlar® stitching for enhanced durability and heat resistance. Minimum palm thickness of 1.2mm for optimal protection without sacrificing dexterity. Fully lined and welted for added comfort and longevity. Crafted from durable cow split leather, it is ideal for MIG welding and workshop use.

Parweld Aluminised MIG Gauntlet

Ultimate Protection with Parweld Aluminised MIG Gauntlet Discover the pinnacle of welding safety with the Parweld Aluminised MIG Gauntlet, a key component of the renowned Parweld Panther Glove Range. Designed for welders who demand high-level protection without compromising on comfort, these gauntlets offer advanced features to keep you safe in the demanding workshop environment. Embrace the blend of innovation and durability that Parweld is known for, and ensure your hands are shielded against the hazards of welding. Enhanced Radiated Heat Protection The Parweld Aluminised MIG Gauntlet features an aluminium backing meticulously engineered to reflect radiated heat away from your hands, providing an added layer of protection during intense welding sessions. This innovative approach to heat defence ensures that you can work closer to the heat source without discomfort, enhancing your welding precision and safety. Durable Construction for Long-lasting Use Constructed with resilience in mind, these gauntlets are stitched with Kevlar® thread, offering exceptional strength and durability. The fully lined interior not only contributes to the glove's structural integrity but also ensures a comfortable fit, allowing for extended use in any workshop setting. The Parweld Aluminised MIG Gauntlet is a testament to the brand's commitment to quality, designed to withstand the rigours of daily welding tasks. Premium Materials for Superior Comfort Crafted from premium cow grain leather, part of the Panther Glove Range, these gauntlets strike the perfect balance between tough protection and soft comfort. The leather's natural properties provide excellent flexibility and dexterity, enabling precise control over your welding tools while ensuring your hands are well-protected. Features and Benefits: Aluminium backing for superior protection against radiated heat. Kevlar® stitching for enhanced durability and longevity. Fully lined for increased comfort and heat resistance. Part of the Parweld Panther Glove Range, known for premium quality. Crafted from cow grain leather for optimal protection and flexibility.

CK Worldwide CK 2 Series WP9 & 20 Long Backcap With O-Ring 41V24

CK 2 Series WP9 & 20 Long Backcap With O-Ring 41V24 Also Fits All Generic WP9/20 TIG Torches Standard And Is An Upgrade For Generic Part Number 41V24 The CK 2 Series WP9 & 20 Long Backcap With O-Ring (41V24) is a high-quality replacement component designed for TIG welding torches, providing a secure seal and optimal tungsten electrode protection. Manufactured for precision and durability, this long backcap offers enhanced control and extended electrode reach, making it ideal for professional and industrial applications. Key Features: Durable, Heat-Resistant Construction – Built from high-quality materials to withstand the high temperatures and demanding conditions of TIG welding. Secure O-Ring Seal – Comes with a precision-fit O-ring, ensuring an airtight seal to prevent gas leaks and maintain welding performance. Long Backcap Design – Provides extended tungsten electrode reach, offering greater flexibility for deep, precision welds. Compatible with CK 2 Series WP9 & WP20 Torches – Specifically designed to fit CK Worldwide 9 and 20 series TIG torches, ensuring a perfect replacement. Quick & Easy Installation – Screws in effortlessly for fast replacement and minimal downtime. Ideal For: Professional welders and fabricators Aerospace, automotive, and precision welding applications Industrial TIG welding projects DIY enthusiasts needing a reliable replacement part Why Choose CK Worldwide? CK Worldwide is a trusted leader in high-quality TIG welding equipment, known for precision engineering, durability, and superior performance. The CK 2 Series WP9 & 20 Long Backcap With O-Ring (41V24) ensures secure tungsten positioning, leak-free operation, and enhanced welding efficiency.

Furick Fupa 12 Ceramic KOKN Cup Kit Twin Pack

Furick Fupa 12 Ceramic Cup Kit The Fupa 12 Ceramic kit comes with two ceramic plans and a spare diffuser, these are designed to perform the same as the glass cups but be more durable. This kit is made to thread onto the 45V44 or the 17 conversion kit. This version only comes in a 2.4mm (3/32) tungsten size and does not require any o-rings.  This ceramic cup from Furick is made to handle up to 200 Amps non-continuance, it is recommended to only use this in DC applications. Please note that the diffuser mesh which comes with the cups are designed to only work with the Furick branded cups- it would be ideal to have a few of these to hand to replace when required. If you require more of these you can find them here please ensure you have selected the correct diffuser mesh.