ESAB MW2000 Welding Overalls Flame Resistant

The ESAB MW2000 Flame Resistant Welding Overalls are professional protective workwear designed specifically for welding, fabrication and associated industrial applications where protection against heat, flame and welding hazards is required. Designed with the demands of professional welders in mind, the MW2000 provides full-body coverage while maintaining the comfort and freedom of movement required for everyday workshop use. The flame-resistant construction helps protect the wearer against brief contact with flame, heat and welding-related hazards, while the overall design helps reduce exposed areas compared with separate jacket and trouser combinations. Practical pockets provide convenient storage for everyday workplace essentials, while the durable construction makes the MW2000 well suited to fabrication shops, engineering facilities, maintenance departments and other demanding industrial environments. Backed by the trusted ESAB name, the MW2000 is an excellent choice for professional welders looking for dependable protective clothing designed around the requirements of welding and fabrication. Key Features Genuine ESAB MW2000 welding overalls Flame-resistant protective workwear Designed specifically for welding and fabrication Full-body overall design Helps protect against heat and brief contact with flame Protection against welding-related hazards Durable construction for professional use Designed to provide good freedom of movement Practical storage pockets Suitable for extended workshop use Ideal for welders, fabricators and maintenance professionals Safety Standards & Specification Codes The MW2000 range is designed as protective clothing for welding and associated industrial applications. EN ISO 11611 – Protective clothing for use in welding and allied processes. EN ISO 11612 – Protective clothing providing protection against heat and flame. Always refer to the certification and garment label supplied with the product for the exact class and performance levels applicable to the specific MW2000 garment. Typical Applications Ideal for: MIG/MAG welding TIG welding MMA/Stick welding General fabrication Engineering Metalworking Maintenance and repair Industrial welding environments Specification Brand: ESABModel: MW2000Product Type: Welding Overalls / CoverallsProtection: Flame ResistantStandards: EN ISO 11611 & EN ISO 11612Application: Welding, Fabrication & Industrial Work The ESAB MW2000 Flame Resistant Welding Overalls provide professional welders and fabricators with a practical combination of protection, durability and everyday working comfort. Please Note: Welding PPE should always be selected according to the welding process, workplace risk assessment and level of heat, flame, spatter and other hazards present.

ESAB Autrodur 56 G M Hardfacing MIG Wire 1.0MM 15KG

ESAB Autrodur 56 G M Hardfacing MIG Wire 1.0mm 15kg The ESAB Autrodur 56 G M Hardfacing MIG Wire is a high-quality solid wire designed for hardfacing and wear-resistant applications where components are subjected to demanding service conditions. Supplied in 1.0mm diameter on a 15kg spool, Autrodur 56 G M provides an efficient solution for building up and hardfacing steel components using the MIG/MAG welding process. It is particularly suited to the repair and maintenance of parts where increased resistance to abrasive wear is required. Ideal for professional repair, maintenance, engineering and fabrication environments, this ESAB hardfacing wire can help extend the service life of worn components, reducing the need for frequent replacement of expensive parts. Key Features Premium ESAB hardfacing MIG/MAG wire Autrodur 56 G M grade 1.0mm wire diameter Supplied on a 15kg spool Designed for producing hard, wear-resistant deposits Excellent choice for components exposed to abrasive wear Suitable for repair, maintenance and component rebuilding Helps extend the working life of worn steel components Ideal for professional engineering and industrial applications Consistent ESAB quality and welding performance Typical Applications Suitable for hardfacing and rebuilding a variety of wear-prone steel components, particularly within maintenance, repair, agricultural, engineering and heavy industrial environments. Typical applications can include wear plates, edges, rollers and other components subjected to abrasive service conditions, subject to the suitability of the base material and required finished properties. Specification Brand: ESABProduct Range: AutrodurGrade: 56 G MProduct Type: Hardfacing MIG/MAG WireWire Diameter: 1.0mmSpool Weight: 15kgProcess: MIG/MAG Hardfacing For best results, the correct welding parameters, shielding gas and preparation should be selected according to the base material and required hardfacing properties.

Starparts WP20 Rigid Head Water Cooled Replacement TIG Torch Body

WP20 Rigid Head Water-Cooled Replacement TIG Torch Body The Starparts WP20 Rigid Head TIG Torch Body is a premium water-cooled TIG solution designed for precision welding at higher amperages. Featuring a rigid head, this torch body gives welders exceptional control and comfort when working in tight spaces or on intricate joints. Its robust construction and efficient water-cooling system make it ideal for demanding, long-duration welding applications. Key Features Water-Cooled Design – Keeps the torch cooler for extended use at higher amperages, reducing operator fatigue. Compact & Lightweight – Provides excellent maneuverability without compromising durability. WP20 Series Compatible – Direct replacement for standard WP20 TIG torch setups. Professional Quality – Manufactured by Starparts, ensuring reliability and long service life. Applications Stainless steel TIG welding High-duty cycle applications Pipework and tube welding Aerospace, fabrication, and heavy-duty production welding  What’s Included 1 × WP20 Rigid Head Water-Cooled TIG Torch Body (handle, consumables, and accessories sold separately) Why Choose the WP20? Designed for welders who demand high performance and flexibility, the WP20 delivers control and dependable cooling. Whether you’re working on stainless steel, thin sheet, or heavy-duty projects, this torch body is engineered to perform.

Starparts WP20FX Flexi Head Water Cooled Replacement TIG Torch Body

WP20FX Flexi Head Water-Cooled Replacement TIG Torch Body The Starparts WP20FX Flexi Head TIG Torch Body is a premium water-cooled TIG solution designed for precision welding at higher amperages. Featuring a flexible head, this torch body gives welders exceptional control and comfort when working in tight spaces or on intricate joints. Its robust construction and efficient water-cooling system make it ideal for demanding, long-duration welding applications. Key Features Flexible Head – Adjusts effortlessly for improved torch positioning in confined or awkward areas. Water-Cooled Design – Keeps the torch cooler for extended use at higher amperages, reducing operator fatigue. Compact & Lightweight – Provides excellent maneuverability without compromising durability. WP20 Series Compatible – Direct replacement for standard WP20 TIG torch setups. Professional Quality – Manufactured by Starparts, ensuring reliability and long service life. Applications Stainless steel TIG welding High-duty cycle applications Pipework and tube welding Aerospace, fabrication, and heavy-duty production welding  What’s Included 1 × WP20FX Flexi Head Water-Cooled TIG Torch Body (handle, consumables, and accessories sold separately) Why Choose the WP20FX? Designed for welders who demand high performance and flexibility, the WP20FX delivers precise control and dependable cooling. Whether you’re working on stainless steel, thin sheet, or heavy-duty projects, this torch body is engineered to perform.

ESAB T2000 TIG Gauntlet Gloves

ESAB T2000 TIG Welding Gloves Precision Handling and Premium Protection for Professional TIG Welders The ESAB T2000 TIG Gloves are purpose-built for high-precision TIG welding applications, where dexterity, comfort, and sensitivity are critical. Engineered with professional welders in mind, these gloves offer exceptional feel and fingertip control, making them ideal for intricate welds on thin materials, stainless steel, or non-ferrous metals. Crafted from high-grade goatskin leather, the T2000 gloves provide a soft, supple feel while maintaining excellent resistance to heat, abrasion, and general wear. Goatskin is known for its fine grain and natural flexibility, which enhances the welder's tactile feedback—essential for maintaining steady torch control during long or delicate welds. The glove interior features a lightweight, unlined design to maximise touch sensitivity, allowing precise manipulation of filler wire and torch controls. The ergonomic cut and straight-thumb design promote comfort during extended welding sessions, while Kevlar® stitching ensures durability under high-heat conditions. Key Features: Premium Goatskin Leather: Soft and flexible for superior fingertip control and dexterity Unlined Interior: Enhances feel and control, perfect for fine TIG work Long Cuff Design: Provides additional forearm protection from radiant heat and spatter Ergonomic Fit: Tailored cut for reduced hand fatigue and improved torch handling Kevlar® Thread Stitching: High-temperature resistance for extended glove life Lightweight Construction: Ideal for extended wear without compromising performance Applications: TIG welding (DC and AC) Precision welding of stainless steel, aluminum, and exotic alloys Pipe and tube welding Automotive, aerospace, and stainless fabrication work Specifications: Material: Premium goatskin outer Lining: Unlined for maximum tactile sensitivity Stitching: Kevlar® thread for enhanced durability Compliance: EN 12477 (Type B), EN 388, EN 407 Sizes Available: Commonly sizes M–XL (availability may vary) The ESAB T2000 TIG Gloves are an excellent choice for welders who need reliable protection without sacrificing precision. Whether you’re on a production line or executing fine TIG work in the field, these gloves help you maintain control, comfort, and confidence.

Mild Steel MIG Wire ER70S-6 SG2 3GSi1 Pallet Of 72 15KG Boxes

HARD CORE SG2 (G3Si1) – Premium Mild Steel MIG Welding Wire HARD CORE SG2 is a high-quality copper-coated solid wire designed for single pass or multi-pass MIG/MAG welding of unalloyed and low-alloyed carbon-manganese steels. It delivers excellent mechanical properties even in sub-zero environments, ensuring consistent performance across a wide range of structural and industrial applications. Key Features Versatile Performance: Suitable for single and multipass welds on a wide variety of carbon-manganese steels. Sub-Zero Toughness: Maintains mechanical properties down to -40°C, making it ideal for demanding environments. Precision Layer Wound: Engineered for smooth and stable wire feeding for superior weld quality. Industrial Applications: Commonly used in boiler fabrication, shipbuilding, automotive, bridges, rail, machinery, and structural steel projects. Reliable Raw Material Source: Produced using premium virgin raw materials for consistent quality and performance. Standards & Classifications EN/ISO Standard: ISO 14341-A AWS Standard: A5.18 EN/ISO Classification: G 42 3 C1 / G 42 4 M21 3Si1 AWS Classification: ER70S-6 Typical Applications Compatible with a wide range of base materials including: Steels: S185, S235, S275, S355 (Grades A, B, D), AH32 to DH36, L210–L360, P235T1–P275T2, etc. Pipes & Tubes: L210, L240, L290, L360, L415MB, X42, X46, X52, X60, etc. Plates & Structures: P235NH, P265GH, S275J2W, S355NL, S420ML, and more (List includes illustrative, not exhaustive, grades) Welding Parameters Wire DiameterVoltage (V)Current (A) 0.8 mm 18–22 V 60–180 A 1.0 mm 18–32 V 80–300 A 1.2 mm 18–34 V 120–380 A Polarity: DC (+) Shielding Gases: EN ISO 14175 – C1, M21 Welding Positions: PA, PB, PC, PD, PE, PF, PG (all positional) Mechanical Properties (Typical) With C1 Gas: Tensile Strength: 540 N/mm² Yield Strength: 440 N/mm² Elongation: 30% Impact Strength: 70 J @ -30°C With M21 Gas: Tensile Strength: 580 N/mm² Yield Strength: 460 N/mm² Elongation: 26% Impact Strength: 90 J @ -40°C Typical Chemical Composition (%)   CSiMnPSCuCrNiMoAlVZr+Ti 0.08 0.95 1.45 ≤0.025 ≤0.025 ≤0.35 ≤0.15 ≤0.15 ≤0.15 ≤0.020 ≤0.030 ≤0.15

ESAB OK GoldRox E6013 Mild Steel Stick Welding Electrodes

ESAB OK GoldRox E6013 Mild Steel Electrodes – Reliable Performance, Clean Results The ESAB OK GoldRox E6013 is a premium-quality rutile-coated electrode designed for MMA (stick) welding on mild steel. It delivers consistent, clean welds with minimal spatter and superior usability, even on low open circuit voltage (OCV) machines. Whether you're welding on-site, in a fabrication shop, or tackling maintenance and repair tasks, GoldRox offers the versatility and reliability professionals demand. Key Features Excellent Arc Striking and Re-Ignition Smooth and dependable arc initiation, even with lower OCV machines such as smaller inverters or older transformers. This ensures fewer false starts and improved weld continuity. Stable Arc with Minimal Spatter Produces a steady arc that’s easy to control, reducing spatter and helping achieve a smooth weld bead with a clean finish — ideal for projects where appearance matters. Self-Releasing Slag The rutile covering allows for excellent slag detachability, often peeling off on its own. This reduces post-weld cleaning time, increases productivity, and improves weld quality. All-Position Welding Engineered for reliable performance in all positions — flat, horizontal, vertical, and overhead — giving you flexibility across a range of welding jobs and environments. Rutile Coating (E6013 Classification) The rutile-based flux coating enhances arc stability and bead appearance, while also reducing the likelihood of porosity and defects, making it a forgiving rod for newer welders but trusted by professionals. Operates on AC and DC Offers outstanding performance on both alternating current (AC) and direct current (DC±), making it compatible with virtually all welding power sources. Applications General fabrication and structural steelwork Sheet metal welding and thin material fabrication Maintenance and repair operations Light to medium construction work Agricultural and domestic welding projects DIY and home welding use Technical Details   Classification: SFA/AWS A5.1 E6013 Alloy Type: Carbon manganese Coating Type: Rutile Current Range: AC or DC± Typical Rod Diameters: 2.5mm, 3.2mm, 4.0mm Typical Operating Parameters: 2.5mm: 60–90 A 3.2mm: 90–130 A 4.0mm: 130–180 A Reposition Rate: ~0.7kg/h

Weld Star Weldstar Mild Steel MIG Wire SG2(G3Si1) ER70S-6 1KG Reel

Weldstar Mild Steel MIG Wire SG2(G3Si1) ER70S-6 1KG Reel Features and Applications A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Good mechanical properties at sub-zero temperatures down to -40ºC. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 <0.35             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 0.60 mm 50-100 15-20 0.80 mm 60-200 18-24 1.00 mm 80-300 18-28    Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Box Qty 0.60 mm 0.80 mm 1.00 mm 1 Kg 1 Kg 1 Kg D100 D100 D100 20 20 20 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star Weldstar ER316L Stainless Steel MIG Wire 5KG 200MM Reel

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. The presence of molybdenum provides creep resistance in a halide atmosphere. ER 316LSi is slightly magnetic and offers good corrosion resistance. Ideal for welding low-carbon molybdenum-bearing austenitic alloys, including joining and surfacing of stainless steels type 316, 316L and 316Ti. High temperature resistance up to 400°C. Precision layer wound for superior wire feeding characteristics. Typically used on applications where good corrosion resistance is required, such as in acid media a/o in chlorinated solutions, hot water tanks, architectural and roofing, food processing and chemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials All 300 series austenitic stainless steel, particularly 316 and 316L* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 19 12 3 L Si AWS A5.9 - ER 316LSi  

Right Lines 6 Piece Welders Magnet Set

Right Lines Magnetic Set The welding magnets replace a third hand, help with simple, precise attachment and positioning, make welding work particularly convenient and clean. Contains 2 x 90 ° & 45° magnets with a lifting capacity weight of 11.KG 2 x 135° - 120° - 105° magnets with a lifting capacity weight of 11.KG 2 x 90° - 45° - 135° magnets with a lifting capacity weight of 4 KG This kit includes six powerful magnets that are perfect for your daily work needs. The magnets have a strong suction that allows you to work hands-free, making it fast, safe, and easy to clean. The angled design of the magnets can hold the blade and tube at 45°, 90°, 105°, 120° and 135° angles. The compact and small appearance of the magnets makes them easy to hold and store. These magnets are suitable for welding, marking, bracing, and positioning in pipe installation, among other scenarios.  

Weld Star Weldstar A32 ER0S-B2 Low Alloy TIG Filler Wire 5KG

Features and Applications Low alloy copper coated wire with 1.25% Cr and 1% Mo content used for the welding of heat-resistant steels. Suitable for welding 0.9% Cr and 0.5% Mo steels. Designed for high temperature power generation applications. Recommended working temperatures of up to 550°C. Typically used on equipment for the chemical and ammonia synthesis process, heat exchangers, boilers, pipes, pressure vessels, petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.    Typical Base Materials 13CrMo4-5, G17CrMo55, A387:2,11,12, A200: T11, T12, GS 25CrMo4, GS 18CrMo910, 10CrMo910, 10CrSiMoV7, 10CrV63, 12CrSiMo8** Illustrative, not exhaustive list   Standards EN ISO 21952-B - 1CM AWS A5.28 - ER 80S-B2   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.55 0.60 <0.012 <0.015 <0.25             Cr% Ni% Mo% Al% V% Fx ppm 1.30 <0.20 0.50 <0.020 <0.010 <15

Weld Star Weldstar E71T-GS Flux Cored Migwire 0.5KG 100MM Reel

Weldstar E71T-GS Flux Cored Migwire 0.5KG 100MM Reel Applications include auto body repairs, tanks, boiler and construction works, 100mm reel is designed for use on spool guns and smaller welders Features and Applications E71T-GS is a self-shielded all position flux cored welding wire for single pass applications. Designed for welding thin carbon and carbon-manganese steels. Offers smooth stable arc, low spatter, easy slag removal and excellent bead appearance. Vacuum-sealed aluminium foil packaging to prevent moisture absorption. Precision layer wound for superior wire feeding characteristics. Applications include auto body repairs, tanks, boiler and construction works. Test Certificates can be found online @wilkinsonstar247.com      Standards AWS A5.20 - E71T-GS   Chemical Composition % (Typical) C% S% Mn% P% Si% Ni % Al% 0.22 0.0010 0.91 0.012 0.25 0.011 1.78   Mechanical Properties (Typical) Tensile Strength ≥480 MPa   Yield Strength ≥400 MPa   Elongation -   Impact Strength -   Test Temperature -   Mechanical properties are approximate and may vary based on the heat, welding parameters and other factors.    Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star Weldstar Dual Core 70M Seamless MIG Wire 1.2MM 16KG 300MM Wire Reel

Weldstar Dual Core 70M Seamless MIG Wire 1.2MM 16KG 300MM Wire Reel Ideal for automated welding applications such as orbital Mag or robotic welding Typically used on steel structures, pipelines, shipbuilding, non-alloy and fine grain steels, pressure vessels, offshore, mechanical engineering, heavy transport and general fabrication etc. Features and Applications Seamless metal cored wire with remarkable stable arc and no spatter. Meets NACE (HIC & SSC) requirements for sour service welding application in oil & gas industry. Can also be used for constructions that needs post weld heat treatment after welding and still offers mechanical properties to grade 5Y46 class. Due to the seamless technology the typical diffusible hydrogen content is <3.0 ml 100 g. Test certificates supplied as 3.1 which is actual weld chemistry + mechanicals according EN 10204:2004. Precision layer wound for superior wire feeding characteristics.    Typical Base Materials Shipbuilding steelsStructural steelsBoiler steelsPipe steelsFine grain steelsSteel acc. API-standard A, B, D, AH 32 - EH 36S185 - S355, A 106 Gr.B, A 333 Gr. 6P235GH - P355GHP235T1/T2 - P460NL2; L210 - L445MBS235 - S460QL1X42 - X60 * Illustrative, not exhaustive list   Standards EN ISO 17632-A - T 46 (42) 6 (2) M M21 (C1) 1 (3) H5 AWS A5.18 - E70C-6M H4   Chemical Composition % (Typical) C% Si% Mn% P% S% Cr% Ni% 0.06 0.75 1.56 0.008 0.006 0.022 0.021               Mo% Cu% Al% V% Ti% Nb%   0.005 0.085 0.006 0.005 0.015 0.002     Mechanical Properties (Typical) Shielding Gas M21   Tensile Strength 600 MPa   Yield Strength 530 MPa   Elongation 27%   Impact Strength 140 J 100 J Test Temperature -40ºC -60ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 1.00 mm 70-220 14-26 1.20 mm 90-330 14-31 1.60 mm 180-420 25-38   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

BÖHLER Bohler Phoenix Blau 30 E6013 Mild Steel Welding Electrodes

Skip to the beginning of the images gallery Bohler Phoenix Blau 30 6013 Mild Steel Welding Electrodes The Böhler Phoenix Blau 30 6013 is a versatile and reliable general-purpose mild steel electrode designed to deliver excellent results in a wide range of welding applications. These electrodes are particularly valued for their ease of use and exceptional performance, even in challenging conditions. Below are the key product benefits: Key Benefits Smooth and Stable Arc Delivers a consistent and smooth arc, making it easier to achieve high-quality welds with minimal spatter. Ideal for welders of all skill levels, from beginners to seasoned professionals. Excellent Weld Appearance Produces clean, visually appealing weld beads with uniform deposition. Minimal slag coverage that is easy to remove, saving time during post-weld cleanup. Versatile Application Suitable for welding mild steel in a variety of positions, including flat, horizontal, vertical, and overhead. Performs well on both AC and DC power sources, offering flexibility in different setups. High Efficiency Designed for high deposition rates, ensuring efficient use of electrodes and faster project completion. Ideal for light to medium fabrication work, including sheet metal welding and general repairs. Reliability in Challenging Conditions Capable of maintaining excellent performance on less-than-perfect surfaces, such as rusted or slightly dirty steel. Provides consistent results in varying conditions, ensuring reliability across different applications. Ease of Use Known for its user-friendly operation, making it a go-to electrode for workshops and fieldwork alike. Reduced operator fatigue due to its smooth arc and ease of handling. Applications General fabrication Automotive repairs Construction and maintenance Light structural welding Conformance: AWS A5.1-04: E6013En ISO 2560-A: E 42 0 RC 11Approvals: TÜV (00425.), DB (10.132.19), ABS, BV, LR, GL (2Y), DNV

Weldstar Dual Core 81R Seamless MIG Wire 16KG

Weldstar Dual Core 81R Seamless MIG Wire 16KG Features and Applications Seamless rutile flux cored wire suitable for applications where low temperature notch toughness is required. The wire has excellent weld puddle manipulation and superior out-of-position weldability. Provides low spatter and an easy slag removal for single or multiple pass applications. Due to the seamless technology the typical diffusible hydrogen content is <3.0 ml 100 g. Extremely low hydrogen levels giving more resistance to cracking. Test certificates supplied as 3.1 which is actual weld chemistry + mechanicals according EN 10204:2004. Precision layer wound for superior wire feeding characteristics. Typically used on steel structures, pipelines, shipbuilding, non-alloy and fine grain steels, pressure vessels, offshore, mechanical engineering, heavy transport and general fabrication etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Shipbuilding steelsStructural steelsBoiler steelsPipe steelsFine grain steelsSteel acc. API-standard A, B, D, AH 32 - EH 36185 - S355, A 106 Gr.B, A 333 Gr. 6P235GH - P485GH up to A516; A537, A455P235T1/T2 - P485NL2; L210 - L485MB up to A 572S235 - S500 (NL1,2) up to A 572X42 - X70 * Illustrative, not exhaustive list   Standards EN ISO 17632-A - T 50 (46) 6 (4) 1Ni P M21 (C1) 1 H5 AWS A5.29 - E81T1-Ni1M(C1)-J H4   Chemical Composition % (Typical) C% Si% Mn% P% S% Cr% Ni% 0.03 0.35 1.09 0.009 0.015 0.033 0.806               Mo% Cu% Al% V% Ti% Nb%   0.006 0.133 0.006 0.015 0.034 0.015     Mechanical Properties (Typical) Shielding Gas M21   Tensile Strength 620 MPa   Yield Strength 550 MPa   Elongation 26%   Impact Strength 90 J 60 J Test Temperature -40ºC -60ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters 1.20 mm 160-280 21-29 1.60 mm 190-350 23-32   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Stronghand Tools Stronghand Mini Angle Magnet Squares Twin Pack

  Stronghand Mini Magnet Squares Twin Pack Strong Hand Tools MS346AT Mini Magnet Squares provide low profile holding of stock in tight, hard to reach places. Use as many Mini Magnet Squares as needed for light duty holding of stock at multiple points for greater accuracy in fixturing with odd-shaped stock. Perfect for use around the shop and compact enough to carry along for use out in the field. Dimensions: 59 x 50 x 16mmMax Pull Force: 10kgAngles: 30°, 60°, 45°,90° magnetic force is based on the longest side of the magnet on 10mm thick steel

CK Worldwide Fronius Gas Through Fitting Watercooled Safe-Loc CK Torch Adaptor

Fronius Gas Through Water-Cooled Safe-Loc CK Torch Adaptor The Fronius Gas Through Water-Cooled Safe-Loc CK Torch Adaptor is a precision-engineered interface that allows you to connect water-cooled TIG torches with Safe-Loc fittings to Fronius welding machines. Designed to ensure reliable delivery of both power and shielding gas while maintaining efficient water cooling, this adaptor is ideal for professional TIG welding setups where durability and performance matter. Key Features & Benefits Secure Safe-Loc connection compatible with Fronius twist-lock style power receptacles. Gas-through design ensures consistent shielding gas flow directly to the torch. Water-cooled capability helps maintain lower operating temperatures for prolonged welding performance. Rugged construction suited for workshop or industrial TIG applications. Compatibility Connects water-cooled TIG torches (with Safe-Loc fittings) to Fronius TIG welding power sources using a 35 mm twist-lock connection. Typically used with high-performance TIG torch systems where water cooling and gas-through capability are required. Application Perfect for professionals seeking a dependable adaptor that maintains efficient cooling and gas delivery between Fronius machines and compatible water-cooled TIG torch assemblies

Weld Star Weldstar FN55 E NiFe-Cl MIG Wire 15KG

Features and Applications Ferro-nickel solid wire used for welding cast iron and ductile iron. Suitable for dissimilar joints between cast iron, mild steel, low alloy and stainless steels. Recommended for welding high sulphur, phosphorous or lubricant-contaminated castings. Precision layer wound for superior wire feeding characteristics. Typically used for a range of repair and fabrication applications, including rebuilding shafts, wheels, critical joints between steel and cast iron etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Grey cast iron, malleable, nodular** Illustrative, not exhaustive list   Standards EN ISO 1071 - SC NiFe-1 AWS A5.15 - E NiFe-CI   Chemical Composition % C% Mn% Si% P% S%     max max max max max     2.00 0.80 0.20 0.03 0.03                   Fe% Ni% Cu% Al%       rem. 54.00 max max         56.00 2.50 1.00         Mechanical Properties Tensile Strength 400 - 579 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, Ar + 1-2% O2   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar Alloy 625 NiCrMo-3 MIG Wire 15KG

Features and Applications High nickel alloy wire developed for welding and cladding nickel-based alloys such as 625 or similar material. Solid drawn in a very special way to obtain cleaner and higher quality welds with a bright seam and excellent ductility. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion. Recommended working temperature ranges from cryogenic to 540°C. Precision layer wound for superior wire feeding characteristics. Typically used in the chemical process industry, marine engineering, nuclear reactor components, aerospace and within pollution control equipment etc.    Typical Base Materials Inconel 601, Incoloy 800, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6625 - NiCr22Mo9Nb AWS A5.14 - ER NiCrMo-3   Chemical Composition % C% Mn% Fe%  P% S% Si%  Cu% max max max max max max max 0.10 0.50 0.50 0.015 0.015 0.50 0.50               Ni%  Co% Al% Ti% Cr%  Nb+Ta% Mo% 60.00 max max max 20.00 3.15 8.00 min 1.0 0.40 0.40 23.00 4.15 10.00   Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength ≥415 MPa   Elongation ≥35%   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar Alloy 82 NiCr-3 MIG Wire 15KG

Features and Applications Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Precision layer wound for superior wire feeding characteristics. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar SG3 G4Si1 Mild Steel MIG Wire 250KG Endurance Pac

Features and Applications Bulk wire drum system that offers a high productivity solution for continuous high volume welding applications. A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. The higher Si-Mn content increases the weld metal strength and leaves a good bead appearance. Designed for semi-automatic and full-automatic GMAW applications. Good mechanical properties at sub-zero temperatures down to -40ºC. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 46 4 M21 4Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.95 1.70 <0.020 <0.020 <.025             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.050 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 570 MPa 590 MPa Yield Strength 460 MPa 490 MPa Elongation 30% 28% Impact Strength 58 J 88 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Monel 400 NiCu-7 TIG Filler Wire 5KG

Features and Applications Nickel-copper alloy designed for welding Monel. Good bead appearance and excellent corrosion resistance in saline solutions. The weld metal has an excellent resistance to a large amount of corrosive media’s. This alloy is also used for weld overlay. Typically used in marine construction, especially offshore, heat exchangers, pipelines, desalination plants, chemical, petrochemical and energy engineering industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Monel alloys 400 and 404** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 4060 - NiCu30Mn3Ti AWS A5.14 - ER NiCu-7   Chemical Composition % C% Mn% Fe% P% S% Si%   max 3.00 0.50 max max max   0.15 4.00 2.50 0.020 0.015 1.00                 Cu% Ni% Co% Ti% Al% Nb+Ta%   28.00 62.00 max 1.50 max max   32.00 69.00 1.00 3.00 1.00 0.50     Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥180 MPa   Elongation ≥30%   Impact Strength ≥80 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 59 NiCrMo-13 TIG Filler Wire 5KG

Features and Applications Alloy 59 is a nickel-chromium-molybdenum alloy with an extra low carbon and silicon content. Versatile alloy with excellent wet corrosion resistance for the most demanding applications. The high level of Mo is similar to alloy C276 but performs better in a wider range of oxidising media’s. Typically used in the welding of aggressively corrosive media’s, including scrubbers for flue gas desulphurisation, digesters and papermaking equipment, chemical process plants, corrosion resistant overlays and in severe offshore and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 22, Alloy 625, Alloy 276, Alloy 686** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6059 - NiCr23Mo16 AWS A5.14 - ER NiCrMo-13   Chemical Composition % C% Mn% Fe% P% S% Si%   max max max  max max max   0.010 0.50 1.50  0.020 0.005 0.08                 Ni% Co% Al% Cr% Mo%     56.00 max 0.10 22.00 15.00     min 0.30 0.40 24.00 16.50       Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  

Weld Star Weldstar Alloy C22 NiCrMo10 TIG Filler Wire

Features and Applications Nickel-chromium-molybdenum alloy designed for joining C22, 625, 825 or combinations of these alloys. Provides a tough Nb-free weld metal for dissimilar welds in super austenitic and super duplex stainless steels. Offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Extensively used for overlays and cladding of lower alloy steels. Typically used in the welding of aggressively corrosive media in chemical processing plants, corrosion resistant overlays and in severe offshore and petrochemical environments etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 22, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6022 - NiCr21Mo13Fe4W3 AWS A5.14 - ER NiCrMo-10   Chemical Composition % C% Mn% Fe% P% S% Si% Cu% max max 2.00 max max max  max 0.010 0.50 6.00 0.020 0.010 0.08  0.50               Ni% Co% Cr% Mo% V% W%   49.00 max 20.00 12.50 max 2.50   min 2.50 22.50 14.50 0.30 3.50     Mechanical Properties Tensile Strength ≥690 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star Weldstar Alloy C276 NiCrMo-4 TIG Filler Wire 5KG

Features and Applications ER-NiCrMo-4 is used for the welding of alloys that have similar chemical compositions, this includes dissimilar materials of nickel-base alloys, steels and stainless steels. Due to the high molybdenum content, this alloy offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Typically used on pipelines, pressure vessels, chemical processing plants, offshore oil platforms, gas facilities, power generation and marine environments etc. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials N10276, W.Nr: 2.4819, NiMo16Cr15W, Alloy C4, Alloy C276** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6276 - NiCr15Mo16Fe6W4 AWS A5.14 - ER NiCrMo-4   Chemical Composition % C% Mn% Fe% P% S% Si%   max max max max max max   0.05 0.80 0.70 0.030 0.010 0.75                 Cu% Ni% Co% Ti% Al%     max 93.00 max 2.00 max     0.20 min 1.00 3.50 1.00       Mechanical Properties Tensile Strength ≥690 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 82 NiCr-3 TIG Filler Wire 5KG

Features and Applications Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 625 NiCrMo-3 TIG Filler Wire 5KG

Features and Applications High nickel alloy wire developed for welding and cladding nickel-based alloys such as 625 or similar material. Solid drawn in a very special way to obtain cleaner and higher quality welds with a bright seam and excellent ductility. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion. Recommended working temperature ranges from cryogenic to 540°C. Typically used in the chemical process industry, marine engineering, nuclear reactor components, aerospace and within pollution control equipment etc.    Typical Base Materials Inconel 601, Incoloy 800, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6625 - NiCr22Mo9Nb AWS A5.14 - ER NiCrMo-3   Chemical Composition % C% Mn% Fe% P% S% Si% Cu% max max max max max max max 0.10 0.50 0.50 0.015 0.015 0.50 0.50               Ni% Co% Al% Ti% Cr% Nb+Ta% Mo% 60.00 max max max 20.00 3.15 8.00 min 1.0 0.40 0.40 23.00 4.15 10.00   Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength ≥415 MPa   Elongation ≥35%   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Arctrode E6013 Kratos M Welding Electrodes 5KG

Weldstar Arctrode E6013 Kratos M Welding Electrodes 5KG Features and Applications Rutile-cellulosic electrode with good weldability in all positions. Exceptional arc stability and reduced spatter for decreased cleaning time. Suitable for low open circuit voltage transformers (min. OCV 42V). Typical applications include assembly, workshop and repair welding of mild and low-alloyed steels. Re-drying not generally required. If necessary 100-110°C for 1 hour.    Typical Base Materials 235JR-S355JR, S235JO-S355JO, P195TR1-P265TR1, P195GH-P265GH, L245NB-L360NB, L245MB-L360MB, shipbuilding steels: A, B, D ASTM A 106 Gr. A, B; A 283 Gr. A, C; A 285 Gr. A, B, C; A 501 Gr. B; A 573 Gr. 58, 65; A 633 Gr. A, C; A 711 Gr. 1013 API 5 L Gr. B, X42, X52** Illustrative, not exhaustive list   Standards EN ISO 2560-A - E 42 0 RC 11 AWS A5.1 - E6013   Analysis of all-weld metal % (Typical) C% Si% Mn% P% S% 0.08 0.40 0.45 0.020 0.015   Mechanical Properties (Typical) Tensile Strength 535 MPa   Yield Strength 445 MPa   Elongation 24%   Impact Strength ≥50 J   Test Temperature 0ºC   Mechanical properties are approximate and may vary based on the heat, welding parameters and other factors.   Welding Parameters Ømm Current (A) 2.50 mm 50-90 3.20 mm 80-130 4.00 mm 140-190   Polarity AC; DC (+)(-)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER80S-Ni1 Low Temp Mild Steel TIG Filler Wire 5KG

Features and Applications Copper coated, Ni-alloy (1,0% Ni), solid wire for low temperature, fine grained and austempering steels. Excellent impact toughness due to the addition of Nickel. Good mechanical properties at sub-zero temperatures down to -50°C. Especially suitable for use in the offshore industry. Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 3Ni1 AWS A5.28 - ER 80S-Ni1   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.09 0.70 1.20 <0.150 <0.150 <0.25             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 1.00 <0.15 <0.200 <0.030 <0.50   Mechanical Properties (Typical) Tensile Strength 600 MPa   Yield Strength 480 MPa   Elongation 26%   Impact Strength 100 J   Test Temperature -50ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar A15 ER70S-2 Mild Steel TIG Wire 5KG

Features and Applications Micro-alloyed steel, triple de-oxidised (Ti, Al, Zr) suitable for the welding of C-Mn and low-alloy steels. Ideal for use on greasy and oxidised surfaces subsequent to any coating processes. (i.e. galvanised steel) Works well at low temperatures. Typically used on tanks, containers, car industry, structural work, household appliances, pipelines, boilers, naval & petrochemical sectors etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A210, A234 S355J2, S380N, P235GH, GS 45, P295GH, P355GH, S355N** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 2Ti AWS A5.18 - ER 70S-2   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.06 0.60 1.20 <0.020 <0.020 <0.25             Cr% Ni% Mo% Al% V% Zr+Ti% <0.10 <0.10 <0.050 0.100 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 560 MPa   Yield Strength 480 MPa   Elongation 24%   Impact Strength 50 J   Test Temperature -30ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  

Weld Star Weldstar ER2594 Super Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by a PREN (Pitting Resistance Equivalent Number) at least 40, thereby allowing the weld metal to be called “super duplex stainless steel”. Provides excellent resistance to intergranular corrosion, pitting and stress corrosion cracking in chloride environments. Over-alloyed with nickel compared to the base material to ensure the optimum combination of microstructure, mechanical properties and corrosion resistance. This alloy is widely used in applications in which corrosion resistance is of the utmost importance. Typically used in the petrochemical and offshores industries, pulp and paper and in the production of pollution control equipment. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32750, S32760, J93380, J93404, S32550, J93370, J93372** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 25 9 4 N L AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 <2.00 <1.00 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     9.33 25.10 3.97 <1.50 0.24       Mechanical Properties Tensile Strength ≥620 MPa   Yield Strength ≥550 MPa   Elongation ≥18 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER2209 Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER385 Stainless steel TIG Filler Wire 5KG

Features and Applications Super austenitic stainless steel wire characterised by its high resistance to stress corrosion cracking. High Ni content in conjunction with the addition of Cu also results in excellent resistance in sulphuric solutions. Ideal for environments subject to pitting and crevice corrosion attacks. The microstructure is fully austenitic and is less sensitive to ferrite and sigma phase precipitation than conventional grades with high molybdenum contents. Typically used in the phosphoric acid and chemical fertiliser industries, hydrometallurgy, paper industry and applications subject to seawater etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS N08904, ASTM B625, B673, B674, B677** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 20 25 5 Cu L AWS A5.9 - ER 385   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.025 1.72 <0.50 <0.020 <0.020                   Ni% Cr% Mo% Cu%       24.87 19.79 4.24 1.36         Mechanical Properties Tensile Strength ≥510 MPa   Yield Strength ≥320 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER317L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire used for welding alloys of a similar chemical composition. Ideal for severely corrosive environments where crevice and pitting corrosion are of concern. Low carbon content reduces the possibilities of intergranular carbide precipitation. Not suitable for structural service above 400°C or for cryogenic applications. Weld deposit is similar to 316L with high molybdenum content for increased corrosion resistance. Typically used in the chemical and petrochemical industries, marine environments, papermaking and food processing industries etc.    Typical Base Materials Stainless CrNiMo steels e.g. 317L or similar** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 18 15 3 L AWS A5.9 - ER 317 / 317L   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.43 0.45 <0.030 <0.030                   Ni% Cr% Mo% Cu%       13.60 18.82 3.55 <0.75         Mechanical Properties Tensile Strength ≥480 MPa   Yield Strength ≥300 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Corten ER80S-G TIG Filler Wire 5KG

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S235JRW, S235J2G3 ; Patinax 37, Alcodur50, Koralpin 52, ; S355J2G3Cu, 9CrNiCuP3-2-4 ; Corten A - B1 ; TsT52.3, S355K2W** Illustrative, not exhaustive list   Standards EN ISO 636-A - W Z3Ni1 AWS A5.28 - ER 80S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.80 1.40 <0.020 <0.020 <0.40             Cr% Ni% Mo% Al% V% Zr+Ti% 0.25 0.80 <0.05 <0.200 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 630 MPa   Yield Strength 550 MPa   Elongation 22%   Impact Strength 60 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER120S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing NiCrMo for welding ultra-high tensile strength steels. Designed for fine grain steels exceeding 890 MPa yield strengths. High impact strength at low temperatures with exceptional plasticity of the weld deposit. Typically used on lifting and handling machinery, bridges, tanks, transport, shipbuilding, railway, mines, cranes, frames, etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S890QL, S960Q ; P460NH, P460NL1 ; Weldox 900, Weldox 960, Strenx 960** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn4Ni2,5CrMo AWS A5.28 - ER 120S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.110 0.70 1.90 <0.015 <0.015 <0.25 0.50               Ni% Mo% Al% V% Ti% Zr%   2.50 0.50 <0.010 <0.030 0.08 <0.050     Mechanical Properties (Typical) Tensile Strength 1040 MPa   Yield Strength 960 MPa   Elongation 16%   Impact Strength 60 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER110S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing NiCrMo for single pass or multipass welding of low alloy steels. Designed for welding high yield strength steels with a minimum tensile strength of 770 MPa. Excellent impact strength at low temperatures down to -40°C. Ideal for steels requiring tough weld metal for critical applications. Typically used in the metal working industry, offshore fabrication, chemical & petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700 etc.** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn3Ni1CrMo AWS A5.28 - ER 110S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.080 0.60 1.60 <0.015 <0.015 <0.25 0.30               Ni% Mo% Al% V% Ti% Zr%   1.50 0.30 <0.030 0.10 <0.050 <0.050     Mechanical Properties (Typical) Tensile Strength 800 MPa   Yield Strength 750 MPa   Elongation 19%   Impact Strength 70 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER100S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications NiCrMo fine-grained steels for low temperature high strength applications. Extreme crack resistant alloy with high mechanical properties and excellent welding characteristics. High impact strength at sub-zero temperatures down to -50°C. Typically used in the industrial sectors of means of transport and ground movement, building industry, bridges, tanks, railway transport, mining industry, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials T1, T1A, T1B, StE 460, StE590, X60, X65, X70, X80, S460, S500, S550, S620, Weldox 500** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn3NiCrMo AWS A5.28 - ER 100S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.08 0.75 1.40 <0.015 <0.015 <0.25 0.55               Ni% Mo% Al% V% Ti% Zr%   0.60 0.25 <0.020 <0.020 <0.050 <0.050     Mechanical Properties (Typical) Tensile Strength 730 MPa   Yield Strength 640 MPa   Elongation 20%   Impact Strength 50 J   Test Temperature -50ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar A18 ER70S-6 Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. The high silicon content increases the fluidity of the weld pool, creating a smoother bead appearance and resulting in minimal post-weld grinding. Good mechanical properties at sub-zero temperatures down to -40°C. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 42 4 3Si1 AWS A5.18 - ER 70S-6  

Weld Star Gas Shielded Dual Core 71R Seamless Wire 1.2MM 16KG

Features and Applications Seamless rutile flux cored wire with rapidly solidifying slag. Excellent welding properties combined with extreme impact toughness down to -40ºC. The wire is all positional and runs with a very stable soft arc producing excellent weld bead finish with negligible spatter. Ideal for root welding on ceramic backing. Due to the seamless technology the typical diffusible hydrogen content is <3.0 ml 100 g. Test certificates supplied as 3.1 which is actual weld chemistry + mechanicals according EN 10204:2004. Precision layer wound for superior wire feeding characteristics. Typically used on steel structures, pipelines, shipbuilding, non-alloy and fine grain steels, pressure vessels, offshore, mechanical engineering, heavy transport and general fabrication etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Shipbuilding steelsStructural steelsBoiler steelsPipe steelsFine grain steelsSteel acc. API-standard A, B, D, AH 32 - EH 36S185 - S355P235GH - P355GHP235T1/T2 - P460NL2 L210 - L445MBS235 - S460QL1X42 - X60 * Illustrative, not exhaustive list   Standards EN ISO 17632-A - T 46 4 (2) P M21 (C1) 1 H5 AWS A5.20 - E71T-1M (C1) J H4   Chemical Composition % (Typical) C% Si% Mn% P% S% Cr% Ni% 0.03 0.41 1.29 0.012 0.006 0.030 0.013               Mo% Cu% Al% V% Ti% Nb%   0.004 0.145 0.002 0.020 0.044 0.012     Mechanical Properties (Typical) Shielding Gas M21   Tensile Strength 600 MPa   Yield Strength 530 MPa   Elongation 26%   Impact Strength 100 J 70 J Test Temperature -40ºC -20ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 1.00 mm 140-230 19-25 1.20 mm 160-280 21-29 1.60 mm 190-350 23-32   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star SG3 G4Si1 MIG Wire 15KG - 300MM Plastic Reel

Features and Applications A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. The higher Si-Mn content increases the weld metal strength and leaves a good bead appearance. Designed for semi-automatic and full-automatic GMAW applications. Good mechanical properties at sub-zero temperatures down to -40ºC. Vacuum-sealed aluminium foil packaging to prevent moisture absorption. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 46 4 M21 4Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.95 1.70 <0.020 <0.020 <.025             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.050 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 570 MPa 590 MPa Yield Strength 460 MPa 490 MPa Elongation 30% 28% Impact Strength 58 J 88 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg D300 D300 D300 72 72 72

Weld Star Copper Free (CF2) Mild Steel SG2 (G3Si1) MIG Wire 15/18KG

Features and Applications A non-copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Environmentally friendly when compared against traditional copper wires offering less fume and smoke in the working environment. Advantages of a stable arc when working with increased welding speeds that achieves high quality welds with almost no spatter. Good mechanical properties at sub-zero temperatures down to -40ºC. Vacuum-sealed plastic bag packaging to prevent moisture absorption. Fitted with alignment hole clip to ensure smooth feeding. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 0.010             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 18 Kg 18 Kg BS300 BS300 BS300 72 56 56 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance

Weld Star Alloy 82 (NiCr-3) MIG Wire 15KG

Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Precision layer wound for superior wire feeding characteristics. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star Nickel Alloy 625 (NiCrMo-3) MIG Wire 15KG

Features and Applications High nickel alloy wire developed for welding and cladding nickel-based alloys such as 625 or similar material. Solid drawn in a very special way to obtain cleaner and higher quality welds with a bright seam and excellent ductility. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion. Recommended working temperature ranges from cryogenic to 540°C. Precision layer wound for superior wire feeding characteristics. Typically used in the chemical process industry, marine engineering, nuclear reactor components, aerospace and within pollution control equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Inconel 601, Incoloy 800, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6625 - NiCr22Mo9Nb AWS A5.14 - ER NiCrMo-3   Chemical Composition % C% Mn% Fe%  P% S% Si%  Cu% max max max max max max max 0.10 0.50 0.50 0.015 0.015 0.50 0.50               Ni%  Co% Al% Ti% Cr%  Nb+Ta% Mo% 60.00 max max max 20.00 3.15 8.00 min 1.0 0.40 0.40 23.00 4.15 10.00   Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength ≥415 MPa   Elongation ≥35%   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER2594 Super Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic wire for welding all grades of super duplex stainless steels. Provides matching chemistry and mechanical property characteristics to wrought super duplex alloys such as 2507 and Zeron 100. Excellent resistance to aggressive environments as well as to pitting and crevice corrosion in warm seawater applications. The presence of Cu and W provides superior resistance to sulphuric and hydrochloric acids when compared to similar alloys without these additions. Improved resistance over austenitic stainless to erosion corrosion and fatigue. Precision layer wound for superior wire feeding characteristics. Typically used in the oil and gas industries, seawater systems, petrochemical and pharmaceutical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32530, S32550, S32750, S32760, 1.4501** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G Z 25 9 4 N L W AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P% Ni%    <0.03 <1.00 <1.00 <0.020 <0.035 9.28                 Cr% Mo% Cu% N% W%     25.12 3.60 0.59 0.22 0.62       Mechanical Properties Tensile Strength ≥750 MPa   Yield Strength ≥550 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER2209 Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Precision layer wound for superior wire feeding characteristics. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF     Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Furick WP9/20 Pink Ceramic Cups Collet Body Mount

Furick WP9/20 Pink Ceramic Cups – Collet Body Mount Torch Compatibility: WP9 / WP20 / WP25 Mount Style: Standard Collet Body (non-gas lens) Material: High-strength pink ceramic Application: General TIG welding – steel, stainless, chromoly, aluminum Product Overview The Furick WP9/20 Pink Ceramic Cups – Collet Body Mount are designed for TIG welders using standard collet body setups (not gas lens). These high-quality cups offer excellent arc stability, good puddle visibility, and thermal durability, making them ideal for a variety of welding applications where gas lens performance is not required. These cups are perfect for welders who prefer or require a traditional collet body configuration on their WP9 or WP20 series torches. Key Features Standard Collet Body Mount Design Compatible with traditional collet and collet body setups—no gas lens required. Ideal for straightforward TIG welding operations or where gas lens kits are unavailable. Durable Pink Ceramic Manufactured from high-purity alumina ceramic with enhanced thermal resistance and mechanical strength, built to withstand regular use in shop or field conditions. Versatile Cup Sizes Typically available in #4 through #8 (1/4" to 1/2" orifice), giving you control over shielding gas coverage and access to different joint configurations. Reliable Arc Focus The ceramic structure helps channel shielding gas efficiently over the arc and weld zone, improving arc focus and reducing oxidation. Technical Specifications AttributeValue Material Alumina pink ceramic Mount Type Standard collet body (non-gas lens) Torch Series WP9 / WP20 / WP25 air-cooled Cup Sizes #4 to #8 (varies by kit/stock) Amperage Range Up to ~180 A (air-cooled torch) Applications TIG welding of mild steel, stainless steel, aluminum, and chromoly Fabrication shops, motorsport builds, exhaust and roll cage work Ideal for welders without a gas lens setup or where stubby kits aren't required Benefits   Easy installation with standard collet bodies—no torch modifications needed Durable and affordable for everyday welding tasks Allows consistent gas coverage for cleaner welds Compatible with multiple cup sizes for flexibility

Furick WP9/20 Pink Ceramic Gas Lens Cups

Furick WP9/20 Pink Ceramic Gas Lens Cups Compatible with: WP9, WP20, and other small-body TIG torches (9/20 series) Cup Type: Gas Lens Ceramic Color: Pink Application: Precision TIG welding – stainless steel, titanium, mild steel, chromoly, aluminum Product Overview The Furick WP9/20 Pink Ceramic Cups are high-performance gas lens cups designed for precision TIG welding applications. Known for their excellent gas coverage, thermal durability, and wide visibility of the weld puddle, these cups are a must-have for welders using WP9 or WP20 series torches—especially in stainless steel and exotic material work. Key Features Premium Pink Ceramic Construction Offers excellent thermal resistance and mechanical strength for long-lasting use under demanding TIG conditions. Optimized for Gas Lens Setups Designed specifically for use with gas lens collet bodies, enabling superior shielding gas flow and puddle coverage, especially in stainless and reactive metal welding. Enhanced Gas Coverage Helps achieve laminar gas flow across the weld zone—reducing oxidation, contamination, and improving overall weld quality. Stubby Gas Lens Compatibility These cups pair well with stubby gas lens kits, ideal for tight-access TIG applications and improved torch balance. Wide Range of Sizes Commonly available in cup sizes #4 through #8 (and sometimes larger), offering options based on joint access, amperage, and gas flow needs. Technical Specifications AttributeValue Material Alumina pink ceramic Cup Sizes #4, #5, #6, #7, #8 (varies by set) Torch Fitment WP9, WP20, WP25 (9/20 series) Use with 45V44, 45V43, 45V42, or stubby lens kits Max Amperage Up to 200 A (air-cooled systems) Applications TIG welding of stainless steel, titanium, Inconel, and mild steel Fabrication, exhaust work, aerospace, and food-grade pipe welding Ideal for low-current, precision work where clean welds and shielding are critical Benefits   Superior shielding gas control over standard cups Improved arc stability and puddle visibility Compatible with Furick and most universal stubby lens kits Helps reduce rework due to oxidation or arc wander Durable and cost-effective for daily professional use

Weld Star Weldstar ER80S-G Corten MIG Wire 15KG 300MM Reel

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Precision layer wound for superior wire feeding characteristics. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.         

TP Weld Tables TIG Storage Tube Filler Rod Divider

TEC Products Custom Made(In-House) Divider For TIG Filler Rod Storage Tubes 50MM Comes In Options Of 2Way, 3Way & 4Way Splits The Perfect Solution To Keep Your Different Sized Filler Rod Organized    Designed For Use With The Blue Demon TIG Storage Tubes (Will fit other makes with a 50mm diameter)

Furick BBW CIPPY Thermoplastic TIG Cup Kit 2.4MM

FULL VERSION BBW CIPPY With Brass Gas lens installed THERMOPLASTIC VERSION Eliminate accidental smashed cups with these fantastic thermoplastic Furick Cippy cups ** DO NOT Rest On A Hot Workpiece As The Cup Will Melt ** 

Furick Markout Pro Mandrel Bend Markout System

Furick Markout Pro Mandrel bend system is the industries First all in 1 Patent Pending system that allows the user to make accurate and repeatable cut lines on your mandrel bends ranging from 3/4 inch to 4 inch in diameter in all Centerline radiuses from 1D up to 7 inch.

Wilkinson Star Weld Star ER120S-G High Strength MIG Wire 15KG

Features and Applications A copper coated wire containing NiCrMo for welding ultra-high tensile strength steels. Designed for fine grain steels exceeding 890 MPa yield strengths. High impact strength at low temperatures with exceptional plasticity of the weld deposit. Precision layer wound for superior wire feeding characteristics. Typically used on lifting and handling machinery, bridges, tanks, transport, shipbuilding, railway, mines, cranes, frames, etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S890QL, S960Q ; P460NH, P460NL1 ; Weldox 900, Weldox 960, Strenx 960** Illustrative, not exhaustive list   Standards EN ISO 16834-A - G 89 4 M21 Mn4Ni2,5CrMo AWS A5.28 - ER 120S-G

Wilkinson Star Weld Star ER110S-G High Strength MIG Wire 15KG

Features and Applications A copper coated wire containing NiCrMo for single pass or multipass welding of low alloy steels. Designed for welding high yield strength steels with a minimum tensile strength of 770 MPa. Excellent impact strength at low temperatures down to -40°C. Ideal for steels requiring tough weld metal for critical applications. Precision layer wound for superior wire feeding characteristics. Typically used in the metal working industry, offshore fabrication, chemical & petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.    Typical Base Materials T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700 etc.** Illustrative, not exhaustive list

Wilkinson Star Weld Star ER80S-Ni1 Low Temp MIG Wire 15KG 300MM Reel

Features and Applications Copper coated, Ni-alloy (1,0% Ni), solid wire for low temperature, fine grained and austempering steels. Excellent impact toughness due to the addition of Nickel. Good mechanical properties at sub-zero temperatures down to -50°C. Especially suitable for use in the offshore industry. Precision layer wound for superior wire feeding characteristics. Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 3Ni1 AWS A5.28 - ER 80S-Ni1

BÖHLER Bohler Spezial D Premium 7016 Welding Electrodes Vac-Packed

Premium quality, Premium low hydrogen 7016 welding electrode. The Böhler Spezial D Premium 7016 Welding Electrodes are a high-performance solution designed for demanding welding applications. Engineered for reliability and precision, these low-hydrogen electrodes deliver exceptional results in structural steel and high-strength welding tasks. Key Features: Low Hydrogen Content: Minimizes the risk of hydrogen-induced cracking, ensuring high-integrity welds in critical applications. Exceptional Arc Stability: Provides a smooth and stable arc for precise control, even in challenging conditions. Vacuum-Packed for Freshness: Electrodes are vac-packed to protect against moisture absorption, ensuring optimal performance straight out of the package. All-Position Welding: Designed for use in all positions, including vertical and overhead, making them versatile for various welding projects. High-Quality Weld Deposits: Produces clean, strong welds with excellent mechanical properties, meeting the demands of rigorous applications. Wide Material Compatibility: Suitable for welding mild steels, structural steels, and high-strength materials. Applications: Construction and infrastructure projects Pressure vessels and boiler fabrication Heavy-duty structural steel welding Shipbuilding and offshore industries Main Features: Special coating technology provides a flat regular and finely rippled surface Stable arc characteristics  Exceptional slag detachability Notch-free wetting behavior Can be welded in DC and AC mode Length, 2.5MM - 350MM, 3.2 & 4.0MM -450MM Classification, AWS A5.1: E7016 Current: 70 to 130 amps. Weight:2.5MM - 18KG CARTON (9 x 2KG PACKS) Weight:3.2MM - 27KG CARTON (9 x 3KG PACKS)  

BÖHLER Bohler Thermanit 308L TIG Filler Wire 5KG Pack

Bohler Thermanit E308L TIG Filler Wire 5KG Stainless; resistant to intercrystalline corrosion and wet corrosion up to 350 °C (662 °F). Corrosion-resistant similar to matching low-carbon and stabilized austenitic 18/8 CrNi(N) steels/cast steel grades. High toughness at subzero temperatures as low as –196 °C (–321 °F). For joning and surfacing applications with matching and similar – stabilized and non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels/cast steel grades. For joining and surfacing work on cryogenic matching / similar austenitic CrNi(N) steels / cast steel grades.ClassificationsAWS A5.9: ER308LEN ISO 14343-B: SS308LEN ISO 14343-A: W 19 9 L

CK Worldwide CK 3 Series Complete Pyrex Gas Saver Cup Front End Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 3 series (CK17, CK18, CK26) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

CK Worldwide CK 3 Series Complete Pink Ceramic Cup Gas Saver Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 3 series (CK17, CK18, CK26) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

CK Worldwide CK 2 Series Complete Pyrex Cup Front End Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available.   Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 2 series (CK9, CK20) torches or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body. Part # Description Quantity 2P8GS CK #8 Pyrex Cup - 2/3 Series Gas Saver, 12.7mm bore x 32.6mm length 1 2C040GS CK Wedge Collet - 2 Series Gas Saver, 1.0mm 1 2HSGS CK Standard Heatshield - 2 Series Gas Saver 1 2CBGS CK Standard Collet Body - 2 Series Gas Saver, One Size Fits All 1 TAS040GS CK Tungsten Adapter - 2/3 Series Gas Saver, 1.0mm 1

CK Worldwide CK 2 Series Complete Pink Ceramic Front End Gas Saver Kit

Ck Worldwide's Gas Saver™ front-end kit allows the users to save up to 40% of shield gas consumption while providing better shield gas coverage patterns. With better shielding gas coverage patterns the welder can extend the tungsten up to 6 x the diameter of the electrode beyond the edge of the gas cup. (This is achieved in draft free areas using argon gas.)Alumina push on or Pyrex high temperature glass cups are available. Alumina cups are durable, impact resistant and handle high temperature welding applications. Pyrex glass cups are used in applications where visibility is an issue such as inside corners, inside pipe, around tubing, etc.The Gas Saver kits will retrofit 2 series (CK9, CK20) or competitive brand equivalents using a replaceable white Teflon heat shield on a silicon rubber torch body.

Bessey Tools Bessey Welders Angle Mitre Clamp 120MM x 2 Box Section Max Input

Bessey Welders angle clamps WSM12 Automatic adjustment to workpieces of various thicknessesSturdy jaws and base plate made from high-quality cast ironThe copper-plated spindle prevents welding splatter from stickingPrecise 90 degrees -angles   Specs Weight (kg) 7.80 Current passage max. (mm) 100 Jaw height (mm) 61 Jaw length (mm) 120 Opening min/max (mm) 2 x 120

Bessey Tools Bessey Welders Angle Clamp 90MM x 2 Capacity

Bessey WSM-9 Welder’s Angle Clamp – 90° Precision Clamping for Welding & Fabrication Accurate and Secure Corner Clamping for Right-Angle Joints The Bessey WSM-9 Welder’s Angle Clamp is specifically designed to deliver fast, precise, and repeatable 90° clamping for a wide range of welding and fabrication applications. Engineered with professional welders and metalworkers in mind, this heavy-duty clamp allows for accurate alignment of materials at right angles, while keeping workpieces clear for welding thanks to its open corner design. Ideal for T-joints, miter joints, and box frame assemblies, the WSM-9 is a reliable and rugged workholding solution that increases efficiency, improves weld quality, and enhances repeatability during fabrication. Key Features: Precise 90° Clamping Perfect for creating square corners and right-angled joints with high accuracy in steel fabrication and welding setups. Open Corner Design Provides unobstructed access to the joint for tack or full welding without removing the clamp—ideal for efficiency and clean weld seams. Independently Adjustable Spindles Each clamping arm has its own spindle, allowing for secure clamping of different material thicknesses on both sides of the corner. Heavy-Duty Construction Made from durable cast iron and steel components, ensuring long service life in tough industrial environments. Self-Centering Action Automatically aligns workpieces with symmetrical clamping force, reducing the need for time-consuming setup adjustments. Technical Specifications: Clamping Angle: 90° Clamping Capacity: Up to 100mm (3.94”) Throat Depth: 75mm Material Compatibility: Round, square, or flat stock Spindles: Two independently adjustable screw spindles Material: Cast iron frame with precision steel spindles Weight: Approx. 4.5 kg Applications: Welding and metal fabrication Frame construction and square assembly Fixture building and structural alignment Suitable for steel, stainless, and aluminium components Perfect for workshops, maintenance teams, and production environments Why Choose the Bessey WSM-9 Angle Clamp? When precision and access matter, the WSM-9 is a game-changer. Designed to keep corners square while offering open access for welding, this clamp saves time, reduces material movement, and improves finished results. Whether you're working on frames, boxes, or structural components, the Bessey WSM-9 delivers strength, control, and accuracy every time.

Bessey Tools Bessey All Steel GS Classix Screw F Clamp

Bessey GS Classix All Steel Screw F Clamp Robust, Reliable Clamping Power for Everyday Workshop Use The Bessey GS Classix Screw F Clamp delivers dependable, high-strength clamping performance in a durable and ergonomic design. Engineered for demanding fabrication, welding, woodworking, and general workshop applications, this versatile clamp is constructed from fully tempered steel, providing excellent resilience, wear resistance, and long-lasting service life. With a clamping force of up to 5000N, the GS Classix ensures secure, slip-free holding for a wide range of materials and projects. Its fixed jaw and sliding arm are built for precision and strength, while the tommy bar handle allows easy, controlled application of clamping pressure without excessive effort. Key Features: High Clamping Force – Up to 5000N Delivers strong, secure clamping pressure ideal for demanding fabrication or assembly tasks. All-Steel Construction Fixed jaw and sliding arm are made from fully tempered steel for maximum strength and long service life under heavy use. Durable Surface Finish Zinc-coated parts resist rust and wear, even in tough shop conditions. Tommy Bar Handle Classic sliding pin design offers simple and efficient torque transfer, even in tight spaces. Ribbed Profile Rail Provides enhanced stability and helps prevent slippage under pressure. Non-Slip Pressure Pad Swivelling pressure pad adjusts to uneven surfaces and materials, enhancing versatility and grip. Technical Specifications (Typical Range): Clamping Force: Up to 5000N Clamping Capacity: Various sizes available (e.g. 200mm, 300mm, 500mm etc.) Throat Depth: Typically 100mm Material: Tempered steel Handle Type: Tommy bar Rail Profile: Ribbed for extra grip and alignment Ideal For: Welding and fabrication setups Joinery and woodworking Assembly and maintenance tasks Metal and plastic work Workshop and industrial use Why Choose the Bessey GS Classix? Backed by Bessey’s reputation for German engineering and quality, the GS Classix series combines affordability with exceptional performance and durability. Whether you're clamping during tack welding, gluing in carpentry, or holding components in place during assembly, this clamp offers reliable grip, easy handling, and rugged construction—making it a staple tool for professionals and DIY users alike.

Bessey Tools Bessey CDFC Forged G Clamp

Clamp Features: Bessey C-clamp CDF403C 75/60 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF404C 105/85 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF406C 150/100 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF408C 205/125 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF410C 245/150 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking

Hycote Aluminium Coat Spray Paint 400ML

WHERE TO USE On all types of metallic and rigid plastics surfaces when used in conjunction with the appropriate primers. WHERE NOT TO USE On surfaces treated with primers of unknown composition, without first ascertaining suitability of use. BENEFITS   Excellent covering power Excellent durability Excellent resistance to sunlight and colour fade Excellent adhesion to primed surfaces   Product Code:Aluminium XUK035

BÖHLER Bohler 1.0MM Thermanit 2209 (ER2209) Duplex Stainless MIG Wire 15KG

Characteristics and typical fields of application Thermanit 2209 is primarily designed for welding the duplex grade 2205 and similar but it can also be used for SAF 2304 type of steels. Thermanit 2209 provides a ferritic-austenitic weldment that combines many of the good properties of both ferritic and austenitic stainless steels. The welding can be performed using short, spray or pulsed arc. Welding using pulsed arc provides good results in both horizontal and vertical-up positions. Structure: Austenite with 45 – 55 % ferrite. Scaling temperature: Approx. 850 °C (air). Corrosion resistance: Very good resistance to pitting and stress corrosion cracking in chloride containing environments.

BÖHLER Bohler AWS E7018-1 Low Hydrogen Welding Electrodes

Bohler AWS E7018-1 Low Hydrogen Welding Electrodes – High-Strength, Low-Hydrogen Performance Bohler AWS E7018-1 Low Hydrogen Welding Electrodes are premium basic-coated stick electrodes designed for high-integrity welding applications where strength, toughness, and crack resistance are critical. Suitable for structural steels and demanding fabrication work, these electrodes deliver reliable performance across a wide range of industries. Formulated with a low hydrogen coating, they minimise the risk of hydrogen-induced cracking, making them ideal for thick sections, restrained joints, and high-strength steels. The “-1” classification indicates enhanced impact toughness at low temperatures, ensuring dependable weld performance even in harsh environments. These electrodes provide smooth arc characteristics, easy slag removal, and excellent weld bead appearance, with consistent mechanical properties and high metal recovery rates. They are suitable for use in all positions (except vertical down), offering flexibility for a variety of welding tasks. Key Features: Low hydrogen basic coating reduces risk of cracking AWS classification: E7018-1 (enhanced low-temperature toughness) Suitable for AC and DC+ welding Excellent arc stability and smooth running characteristics High-quality weld deposits with easy slag removal All-position welding capability (except vertical down) High metal recovery (>110%) for efficient welding () Applications: Structural steel fabrication Shipbuilding and offshore construction Pressure vessels and boiler work Pipeline welding and heavy engineering Machinery and general fabrication Why Choose These Electrodes? Enhanced low-temperature toughness – The “-1” classification ensures strong, reliable welds even in cold or demanding service conditions. () Reduced risk of hydrogen cracking – Ideal for critical welds on thick or high-strength materials. Consistent, high-quality results – Smooth arc, clean slag release, and excellent bead appearance improve productivity and finish. Versatile and industry-approved – Widely used across structural, offshore, and heavy fabrication sectors with multiple certifications. () Professional-grade reliability – Designed for applications where weld integrity and performance cannot be compromised. Dependable, durable, and engineered for demanding environments, Bohler AWS E7018-1 electrodes are the go-to choice for high-strength, low-hydrogen welding applications. ConformanceEN ISO 2560-A: E 42 5 B 42 H5AWS A5.1: E7018-1H4ApprovalsTÜV (12451.),ABS, BV, DNV,GL, CE

Weld Star HF600 Solid Hard Facing MIG Wire 15kg 300MM Metal Reel

Features and Applications Copper coated high alloy solid wire for hardfacing and overlay of all C-Mn steels. This alloy deposits a martensitic structured weld metal with a hardness of about 54-60 HRC. Excellent abrasion resistance to moderate impact and high toughness. The weld metal has a Cr-Si structure and if not tempered can only be machined by grinding. Mostly used with semiautomatic and automatic procedures. A buffer layer is essential with hard to weld steels. Precision layer wound for superior wire feeding characteristics. Typically used on excavators in the mining industry, cylinder crushers, pneumatic hammers, knives, cutting and cold working tools, crumbling jaws, anvils, caterpillars, screws, guide rollers, etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials X45CrSi9-3, 4Xr9Si2, X45CrSi8, HNV1, HNV2, SUH11, X45CrSi 9-3, 401 S45, SUH 1, STR 1, 40Ch9S2** Illustrative, not exhaustive list   Standards EN ISO 14700 - S Fe 8 DIN 8555 - MSG 6-GZ-60-GP   Chemical Composition % (Typical) C% Mn% Si% S%       0.46 <0.60 3.05 <0.030                     Cu% P% Ni% Cr%       <0.25 <0.040 <0.50 9.10         Mechanical Properties Hardness (HRC) - 54 - 60 Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.  

Weld Star Mild Steel SG2 G3Si1 MIG Wire 250kg Marathon Bulk Pack

Features and Applications Bulk wire drum system that offers a high productivity solution for continuous high volume welding applications. A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Good mechanical properties at sub-zero temperatures down to -40ºC. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 <0.35             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Bessey Tools Bessey Clamp Quick Ratchet Lever Clamp

Bessey All Steel Lever Clamp Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy to handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GSH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.

Bessey Tools Bessey High Performance All Steel Screw Clamp

Bessey High Performance All Steel Screw Clamp Increasingly high clamping pressures, with larger throat depths and wider openings. Clamping force up to 12,000N with a tightening torque of 40Nm, These are the demands that original BESSEY high-performance clamps need to fulfil on a daily basis.     Used in general fabrication, steel and boiler construction, shipbuilding and automotive engineering. Also in heavy timber construction, laminated wood beam construction and carpentry. In other words, wherever sturdy or heavy parts need to be clamped very securely, with a very high clamping pressure. Developed on the basis of the tried-and-tested BESSEY all-steel screw clamp, the original BESSEY high-performance clamps fulfil all requirements with panache... again and again! The high-performance clamp. Your benefits at a glance: Extremely sturdy. Fixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Special tilting pressure plate.The heat-resistant pressure plate is replaceable and can be tilted up to 35° so it can even clamp on angled or sloping surfaces. Tempered spindle.The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability. Sturdy tommy bar.The sturdy tommy bar has special rounded hand-friendly ends, as well as a hexagonal bolt. This allows powerful, controlled clamping.  

Irwin Vise-Grip 7R Straight Jaw Locking Pliers

The IRWIN Vise-Grip straight Jaw Locking Pliers are suitable for general purpose and provide maximum strength and gripping capacity. Adjusting screw that tightens to draw materials closer together and also provides controlled release. Adjusts to various sizes. Straight serrated jaws with quick-release lever. 7RC: Length: 178mm, Capacity: 38mm10RC: Length: 254mm, Capacity: 48mm These Irwin Vise-Grip Straight Jaw Locking Pliers have the following specification: Length: 178mm (7in)Capacity: 38mm

Irwin Vise-Grip 10CR Curved Jaw Locking Pliers

The IRWIN Vise-Grip Curved Jaw (CR) Locking Pliers feature a unique self-energising lower jaw that delivers 3x more gripping power than traditional locking pliers, with absolutely no slipping or stripping. The slotted geometry of the new ‘self-energising’ Vise-Grip CR locking pliers exponentially increases torque for more secure clamping. The Vise-Grip CR Plies can establish multiple contact points, guaranteeing a significantly tighter grip. As a result, the CR range is especially well-suited for performing in greasy work environments and for manoeuvring in tight spaces where a worker cannot easily get two hands on a tool. The patented curved jaw securely grips multiple surface shapes including round pipes, square or hex bolts and more. These Irwin Vise-Grip Curved Jaw Locking Pliers have the following specification: Length: 254mm (10in).Capacity: 48mm.

Irwin Vise-Grip 7CR Curved Jaw Locking Pliers

The IRWIN Vise-Grip Curved Jaw (CR) Locking Pliers feature a unique self-energising lower jaw that delivers 3x more gripping power than traditional locking pliers, with absolutely no slipping or stripping. The slotted geometry of the new ‘self-energising’ Vise-Grip CR locking pliers exponentially increases torque for more secure clamping. The Vise-Grip CR Plies can establish multiple contact points, guaranteeing a significantly tighter grip. As a result, the CR range is especially well-suited for performing in greasy work environments and for manoeuvring in tight spaces where a worker cannot easily get two hands on a tool. The patented curved jaw securely grips multiple surface shapes including round pipes, square or hex bolts and more. These Irwin Vise-Grip Curved Jaw Locking Pliers have the following specification: Length: 178mm (7in)Capacity: 38mm

Irwin Vise-Grip 6SP 150MM Swivel Pad Locking C-Clamp

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used. Swivel pads are fitted to prevent damage to soft materials and are designed to hold irregular or tapered work. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Visegrip Irwin 6SP Locking C-Clamp Swivel Pad. Length: 150mm (6in)Throat Diameter: 32mm (1 1/4in)Capacity: 50mm (2in)

Welding Shelter Frame Only

The SAFE2072 Welding Shelter Frame Only provides a practical framework for creating a designated welding area or welding bay within fabrication workshops, engineering facilities and industrial environments. Designed to support a compatible welding shelter covering, the frame provides the structural foundation for establishing a dedicated workspace where welding and fabrication activities can be carried out. A welding shelter can help separate welding operations from surrounding workshop activities, particularly where suitable welding curtains or protective screens are installed to help reduce exposure to welding arc radiation and sparks. The SAFE2072 Welding Shelter Frame is ideal for businesses looking to establish a new welding bay, replace an existing shelter frame or improve the organisation of their welding and fabrication workspace. Please note: This product is supplied as the FRAME ONLY. Welding curtains, shelter covers and other accessories are not included unless specifically stated. Key Features SAFE2072 Welding Shelter Frame Frame-only configuration Designed for use with a compatible welding shelter covering Ideal for creating designated welding bays Suitable for professional welding and fabrication workshops Provides a framework for welding area separation Suitable for new welding bay installations Practical replacement for a compatible existing shelter frame Helps organise welding operations within industrial environments Suitable for engineering, maintenance and fabrication applications Typical Applications Ideal for: Welding and fabrication workshops Designated MIG welding bays TIG welding work areas MMA / Stick welding stations Engineering workshops Industrial maintenance facilities Training and educational welding facilities Workshop welding area separation Replacement welding shelter installations Specification Product Code: SAFE2072Product Type: Welding Shelter FrameConfiguration: Frame OnlyApplication: Welding Bay / Welding ShelterSuitable For: Welding, Fabrication & Engineering WorkshopsCurtains / Covers Included: NoCompatibility: Suitable welding shelter covering required  

Markal 'B' Solid Paint Marker Stick

Markel Type B Paintstik Paint Marker are designed for a wide range applications. The lead free formula combines the durability of paint with the ease of use of a crayon. Weather and UV resistant, it easily marks on rough or smooth surfaces and even on dirty and rusted components. Its water and oil resistant properties make it suitable for marking wet and oil saturated surfaces. Features and Benefits • Lead free non-toxic paint in solid marker form• Easy application for added convenience on all tasks• Durable weatherproof, water and oil resistant properties• Suitable for marking smooth, rough, rusty and soiled surfaces• Wide operating temperature range from -46 degrees to +66 degrees• Available in a range of colours

CK Worldwide CK Flexloc FL230 2 Series Water Cooled TIG Torch

The Flex-Loc™ series torch is a variable angle torch that locks into any position within a 360 degree rotation. Interchangeable heads allow different size tungsten and head sizes to be quickly and efficiently changed. The patented Flex-Loc™ TIG Torch is available in water cooled and gas cooled models. Great for applications requiring a unique angle yet allowing the user a rigid torch. Ergonomically designed to help eliminate fatigue.Applications: Cup walking on pipe root welds, welds that require a mirror to access weldment, welds requiring different tungsten sizes. 360 degree variable angle torch head Locks in any position Interchangeable head allows different configurations and head sizes Great for “walking the cup” on open root welds for pipe cutting Access hard to reach welds ergonomically Helps prevent carpal tunnel syndrome Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications CK Colour Coded Superflex Cable   3/8" gas fittings Colour coded leads for quick identification Black argon hose Blue water hose Red power cable

CK Worldwide CK AK-4 TIG Torch Accessory Kit For 2 Series Torch

CK TIG Torch Accessory Kit AK4 Suitable for CK 2 Series Torches: CK9, CK20, CK25, CK100, CK110, CK130, CK200, CK230, CKM200, CKM230, CKPF130, CKPF200, CWH230, CWM230, FL130, FL230. Also Fits Generic WP9 & 20 Torches  This Kit Contains The Following: Part # Description Quantity 200L (41V24) Long Backup 1 2C116 (13N22) 1.6mm (1/16") Collet 1 2C332 (13N23) 2.4mm (3/32") Collet 1 2C418 (13N24) 3.2mm (1/8") Collet 1 2CB116 (13N27) 1.6mm (1/16") Collet Body 1 2CB332 (13N28) 2.4mm (3/32") Collet Body 1 2CB418 (13N29) 3.2mm (1/8") Collet Body 1 2A5 (13N09) 8.0mm (5/16") #5 Alumina Cup 1 2A6 (13N10) 9.6mm (3/8") #6 Alumina Cup 1 2A8 (13N12) 12.8mm (1/2") #8 Alumina Cup 1 T1167GC2 1.6mm (1/16") x 175mm (7") 2% Ceriated Tungsten 1 T3327GC2 2.4mm (3/32") x 175mm (7") 2% Ceriated Tungsten 1 T187GC2 3.2mm (1/8") x 175mm (7") 2% Ceriated Tungsten 1

CK Worldwide CK Complete Gas Saver Kit For 3 Series Torches

Suitable for CK 3 Series Torches: CK17, CK18, CK26, CK150, CK210, CK300, CK510, CKC150, CKM210, CKM350, CWH350, CWHTL300, CWM350, FL150, FL250, TL18, TL26, TL210, TL300. The Kit Contains The Following: Part # Description Quantity 300S (57Y04) Short Backup 1 3C116GS 1.6mm (1/16") Collet 1 3C332GS 2.4mm (3/32") Collet 1 3C418GS 3.2mm (1/8") Collet 1 TAS116GS 1.6mm (1/16") Tungsten Adaptor 1 TAS332GS 2.4mm (3/32") Tungsten Adaptor 1 TAS418GS 3.2mm (1/8") Tungsten Adaptor 1 3CBGS Collet Body 1 3HSGS Heatshield 1 3A5GS 8.0mm (5/16") #5 Alumina Cup 1 3A6GS 9.6mm (3/8") #6 Alumina Cup 1 3A8GS 12.8mm (1/2") #8 Pyrex Cup 1 T1167GC2 1.6mm (1/16") x 175mm (7") 2% Ceriated Tungsten 1 T3327GC2 2.4mm (3/32") x 175mm (7") 2% Ceriated Tungsten 1 T187GC2 3.2mm (1/8") x 175mm (7") 2% Ceriated Tungsten 1

CK Worldwide CK AK-3 Accessory Kit For 3 Series Torches

Suitable for CK 3 Series Torches: CK17, CK18, CK26, CK150, CK210, CK300, CK510, CKC150, CKM210, CKM350, CWH350, CWHTL300, CWM350, FL150, FL250, TL18, TL26, TL210, TL300. The Accessory Kit Contains The Following: Part # Description Quantity 300L (57Y02) Long Backup  1 300S (57Y04) Short Backup 1 3C116 (10N23) 1.6mm (1/16") Collet 1 3C332 (10N24) 2.4mm (3/32") Collet 1 3C418 (10N25) 3.2mm (1/8") Collet 1 3CB116 (10N31) 1.6mm (1/16") Collet Body 1 3CB332 (10N32) 2.4mm (3/32") Collet Body 1 3CB418 (10N28) 3.2mm (1/8") Collet Body 1 3A5 (10N49) 8.0mm (5/16") #5 Alumina Cup 1 3A6 (10N48) 9.6mm (3/8") #6 Alumina Cup 1 3A8 (10N46) 12.8mm (1/2") #8 Alumina Cup 1 T1167GC2 1.6mm (1/16") x 175mm (7") 2% Ceriated Tungsten 1 T3327GC2 2.4mm (3/32") x 175mm (7") 2% Ceriated Tungsten 1 T187GC2 3.2mm (1/8") x 175mm (7") 2% Ceriated Tungsten 1

CK AK-2 Starter Kit For 3 Series Torches CK17, 18, 26

Suitable for CK 3 Series Torches: CK17, CK18, CK26, CK150, CK210, CK300, CK510, CKC150, CKM210, CKM350, CWH350, CWHTL300, CWM350, FL150, FL250, TL18, TL26, TL210, TL300. Kit Contains the following: Part # Description Quantity 300S (57Y04) Short Backup 1 3C40 (10N22) 1.0mm (.040") Collet 1 3C116 (10N23) 1.6mm (1/16") Collet 1 3C332 (10N24) 2.4mm (3/32") Collet 1 3CB40 (10N30) 1.0mm (.040") Collet Body 1 3CB116 (10N31) 1.6mm (1.16") Collet Body 1 3CB332 (10N32) 2.4mm (3/32") Collet Body 1 3A4 (10N50) 6.4mm (1/4") #4 Alumina Cup 1 3A5 (10N49) 8.0mm (5/16") #5 Alumina Cup 1 3A6 (10N48) 9.6mm (3/8") #6 Alumina Cup 1 T0407GC2 1.0mm (.040") x 175mm (7") 2% Ceriated Tungsten 1 T1167GC2 1.6mm (1/16") x 175mm (7") 2% Ceriated Tungsten 1 T3327GC2 2.4mm (3/32") x 175mm (7") 2% Ceriated Tungsten 1

CK Worldwide CK AK-1 Starter Kit For 2 Series Torches (CK9,CK20)

Suitable for CK 2 Series Torches: CK9, CK20, CK25, CK100, CK110, CK130, CK200, CK230, CKM200, CKM230, CKPF130, CKPF200, CWH230, CWM230, FL130, FL230. Includes the Following Parts: Part # Description Quantity 200L (41V24) Long Backup 1 2C40 (13N21) 1.0mm (.040") Collet 1 2C116 (13N22) 1.6mm (1/16") Collet 1 2CB40 (13N26) 1.0mm (.040") Collet Body 1 2CB116 (13N27) 1.6mm (1/16") Collet Body 1 2A4 (13N08) 6.4mm (1/4") #4 Alumina Cup 1 2A5 (13N09) 8.0mm (5/16") #5 Alumina Cup 1 2A6 (13N10) 9.6mm (3/8") #6 Alumina Cup 1 T0407GC2 1.0mm (.040") x 175mm (7") 2% Ceriated Tungsten 1 T1167GC2 1.6mm (1/16") x 175mm (7") 2% Ceriated Tungsten 1

Furick Stubby Wedge Collet For WP17,18,26 TIG Torches

Furick Stubby Wedge Collet for WP17, WP18 & WP26 TIG Torches The Furick Stubby Wedge Collet is precision-engineered to improve tungsten grip, electrical conductivity and arc stability in TIG welding applications. Designed specifically for WP17, WP18 and WP26 TIG torches, this high-performance collet offers superior reliability compared to standard split collets. Key Features & Benefits Wedge-style design for stronger, more consistent tungsten clamping Improved electrical contact for enhanced arc stability Stubby format allows better access in tight or restricted welding areas Reduces tungsten movement and vibration during welding Ideal for precision and high-amperage TIG applications Compatibility Suitable for WP17, WP18 and WP26 TIG torches Designed to work with Furick stubby TIG consumable systems Performance & Quality Manufactured to exacting standards, the Furick Stubby Wedge Collet provides repeatable performance and long service life. Its robust construction ensures dependable operation in demanding workshop and site conditions, making it a trusted choice for professional TIG welders. Applications   Stainless steel TIG welding Mild and carbon steel TIG welding Aluminium TIG welding *** For Use With Furick 17 Adaptor Kit Gas Lens Bodies ***

CK Worldwide CK Series 3 Backcap Long 57Y02 Fits WP17,18 & 26 Torches

CK Series 3 Back Cap Long 57Y02 – Fits WP17, WP18 & WP26 Torches The CK Series 3 Long Back Cap (57Y02) is a genuine CK Worldwide replacement part designed for use with WP17, WP18, and WP26 TIG torch series. This long back cap securely holds the tungsten electrode in place, maintaining proper alignment and electrical contact during welding. Manufactured from high-quality, heat-resistant materials, it ensures long service life even under demanding conditions. The long design allows for the use of extended tungsten electrodes, providing greater reach and visibility for precision welding applications. Key Features: Genuine CK Worldwide TIG torch component Long back cap (57Y02) – for use with extended tungsten electrodes Ensures secure electrode hold and stable arc performance Heat-resistant construction for long life and durability Compatible with WP17, WP18 & WP26 TIG torches Interchangeable with standard 3 Series TIG torch consumables Typical Applications: TIG Welding | Stainless Steel | Aluminium | Mild Steel | Fabrication | Maintenance Brand: CK Worldwide Part Number: 57Y02 Series: 3 Series Fits: WP17, WP18, WP26 Torches

CK Worldwide CK TIG Torch Gas Lens Body Standard 3 Series CK17,18 & 26

CK Standard 3 Series TIG Torch Gas Lens Body – Fits CK17, CK18 & CK26 The CK Standard 3 Series TIG Torch Gas Lens Body delivers superior shielding gas coverage and improved weld quality in all TIG applications. Precision-engineered by CK Worldwide, this gas lens body replaces the standard collet body to provide a more laminar gas flow, reducing turbulence and improving protection of the weld pool. Constructed from high-conductivity copper alloy, it ensures excellent current transfer and heat dissipation, helping extend tungsten and consumable life. Compatible with CK17, CK18, and CK26 torch series, this gas lens body is ideal for precision welding on stainless steel, aluminium, and other sensitive materials. Key Features: Genuine CK Worldwide replacement part Provides improved shielding gas coverage for cleaner welds High-quality copper alloy for superior conductivity and durability Enhances tungsten and consumable life Compatible with CK17, CK18 & CK26 TIG torches Works with all CK 3 Series gas lens collets and cups Typical Applications: TIG Welding | Stainless Steel | Aluminium | Titanium | Precision Fabrication   Brand: CK Worldwide Series: 3 Series Fits: CK17, CK18, CK26 Torches Sold Singularly - If packs Are Required Please Order In Quantities Of 10

CK Worldwide CK Standard 3 Series TIG Standard Collet Body Fits WP17,18 & 20 Torches

CK Standard 3 Series TIG Collet Body – Fits WP17, WP18 & WP26 The CK Standard 3 Series TIG Collet Body is a precision-engineered component designed to deliver reliable performance and optimal gas flow in TIG welding applications. Manufactured from high-quality copper alloy, it ensures excellent conductivity and heat dissipation for stable arc performance and extended consumable life. Compatible with WP17, WP18, and WP26 torch series, this standard collet body works with matching CK 3 Series collets and cups to provide a secure, consistent electrode setup. Ideal for professional TIG welders seeking dependable, high-performance consumables. Key Features: Genuine CK Worldwide replacement part Precision-machined copper alloy for maximum conductivity and durability Ensures stable gas flow and superior arc control Compatible with WP17, WP18 & WP26 TIG torches Works with all CK 3 Series collets and alumina cups Built for professional TIG welding applications Typical Applications: TIG Welding | Stainless Steel | Mild Steel | Aluminium | Exotic Alloys   Brand: CK Worldwide Series: 3 Series Fits: WP17, WP18, WP26 Torches Sold Singularly - If Packs Are Required Please Order In Quantities Of 5

CK Worldwide CK Standard Split Collet 3 Series Fits WP17, 18 & 26

CK Standard Split Collet 3 Series – Fits WP17, WP18 & WP26 The CK Standard Split Collet 3 Series is engineered for precision, durability, and optimal performance in TIG welding applications. Manufactured by CK Worldwide, these high-quality collets are designed to provide a secure grip on the tungsten electrode, ensuring stable arc performance and excellent current transfer. Compatible with WP17, WP18, and WP26 torch series, the split design allows for easy installation and consistent clamping pressure, reducing heat build-up and extending both collet and torch life. Ideal for professional TIG welders demanding reliability and consistency across a wide range of materials and applications. Key Features: Genuine CK Worldwide replacement part Standard split design for consistent electrode grip and easy fitment Provides excellent current transfer and arc stability Precision-machined copper alloy for superior conductivity and durability Compatible with WP17, WP18, and WP26 TIG torches Available in all common tungsten diameters Typical Applications: TIG Welding | Stainless Steel | Mild Steel | Aluminium | Exotic Alloys   Brand: CK Worldwide Series: 3 Series Fits: WP17, WP18, WP26 Torches   Available in the following sizes: 0.5MM 1.0MM 1.6MM 2.4MM 3.2MM 4.0MM Sold Singularly - If Packs Are Required Please Order In Quantities Of 5

CK Worldwide CK 3 Series TIG Standard Collet Body Alumina Cup WP17,18 & 26 Fitment

The CK 3 Series TIG Standard Collet Body Alumina Cup is a high-quality replacement TIG torch consumable designed for use with WP17, WP18 and WP26 series TIG torches fitted with a standard collet body setup. Manufactured from durable alumina ceramic, the cup is designed to withstand the high temperatures generated during TIG welding while directing the shielding gas around the tungsten electrode and into the weld area. Correct shielding gas coverage is essential for protecting the molten weld pool and tungsten electrode from atmospheric contamination. Replacing worn, cracked or damaged ceramic cups helps maintain reliable gas coverage and consistent TIG welding performance. The CK 3 Series fitment makes these cups suitable for the widely used WP17 air-cooled, WP18 water-cooled and WP26 air-cooled TIG torch platforms, making them an essential consumable for professional welding and fabrication workshops. Available in a range of cup sizes to suit different tungsten sizes, joint configurations, gas flow requirements and welding applications. Key Features Genuine CK Worldwide 3 Series TIG consumable Standard collet body alumina ceramic cup Compatible with WP17, WP18 and WP26 TIG torches Durable high-temperature alumina construction Directs shielding gas around the tungsten and weld pool Helps maintain consistent shielding gas coverage Suitable for standard collet body TIG torch setups Available in multiple cup sizes Quick and straightforward replacement Ideal for professional TIG welding and fabrication Useful replacement or workshop spare Torch Compatibility Suitable for compatible: WP17 TIG Torches WP18 TIG Torches WP26 TIG Torches CK Worldwide 3 Series compatible torch setups Typical Applications Ideal for: Mild steel TIG welding Stainless steel TIG welding Aluminium TIG welding Pipe and tube fabrication Automotive fabrication General engineering Maintenance and repair Precision TIG welding Specification Brand: CK WorldwideSeries: 3 SeriesProduct Type: TIG Torch Alumina CupMaterial: Alumina CeramicTorch Fitment: WP17, WP18 & WP26Configuration: Standard Collet BodyAvailable Sizes: Various Cup SizesApplication: TIG / GTAW Welding  

CK Worldwide CK Standard Split Collet CK 2 Series - Fits WP9 & 20 Torches

CK Standard Split Collet 2 Series – Fits WP9 & WP20 Torches The CK Standard Split Collet 2 Series is a high-quality, precision-engineered TIG consumable from CK Worldwide, designed to provide a secure grip and consistent electrical contact with the tungsten electrode. Its split design ensures even clamping pressure and reliable current transfer, resulting in a stable arc and improved weld quality. Manufactured from premium copper alloy for excellent conductivity and durability, this collet is compatible with all WP9 and WP20 torch series, as well as equivalent 2 Series TIG torches. Ideal for professional TIG welders requiring dependable performance and long service life. Key Features: Genuine CK Worldwide replacement collet Standard split design for secure tungsten clamping Ensures consistent current transfer and arc stability Precision-machined copper alloy for durability and conductivity Compatible with WP9 & WP20 TIG torches Works with all CK 2 Series collet bodies and cups Typical Applications: TIG Welding | Stainless Steel | Mild Steel | Aluminium | Titanium | Precision Fabrication   Brand: CK Worldwide Series: 2 Series Fits: WP9, WP20 Torches Fits All Standard WP9 & 20 TIG Torches Aswell As CK Branded Ones 0.5MM - 13N20 1.0MM - 13N21 1.6MM - 13N22 2.4MM - 13N23 3.2MM - 13N24  Sold Singularly - If Pack Sizes Are Wanted Please Order In Quantities Of 5

CK Worldwide CK 2 Series Standard Gas Lens Ceramic Cup

The CK Worldwide 2 Series Standard Gas Lens Ceramic Cup is a high-quality replacement TIG torch consumable designed for use with CK 2 Series, WP9 and WP20 TIG torches fitted with a compatible standard gas lens assembly. Manufactured from durable, heat-resistant alumina ceramic, these TIG cups are designed to withstand the demanding temperatures associated with TIG welding while helping direct shielding gas around the tungsten electrode and weld pool. When used with a suitable TIG gas lens collet body, the ceramic cup forms part of a shielding gas system that produces a smoother, more evenly distributed gas flow compared with a conventional standard collet body arrangement. This improved gas coverage can help protect the tungsten electrode and molten weld pool from atmospheric contamination, supporting cleaner welds and more consistent welding results. The CK 2 Series Gas Lens Ceramic Cup is particularly suitable for precision TIG welding applications where effective shielding gas coverage is essential, including stainless steel fabrication, pipe welding, automotive fabrication and general engineering. Available in a range of cup sizes to suit different welding applications, joint configurations and shielding gas requirements. Key Features Genuine CK Worldwide 2 Series TIG consumable Standard gas lens ceramic cup Compatible with WP9 and WP20 TIG torches using a suitable gas lens setup Manufactured from heat-resistant alumina ceramic Designed for use with standard 2 Series gas lens collet bodies Helps provide consistent shielding gas coverage Supports smoother gas distribution when used with a gas lens Helps protect the tungsten electrode and weld pool Suitable for precision TIG welding applications Available in various ceramic cup sizes Ideal replacement for worn, cracked or damaged TIG cups Suitable for professional welding and fabrication workshops Torch Compatibility Suitable for compatible: WP9 TIG Torches WP20 TIG Torches CK Worldwide 2 Series TIG Torches Other TIG torches using compatible 2 Series standard gas lens consumables Important: These cups are designed for standard gas lens configurations and are not necessarily interchangeable with standard collet body cups or larger-diameter gas lens systems. Typical Applications Ideal for: Stainless steel TIG welding Mild steel TIG welding Aluminium TIG welding Precision welding Pipe and tube fabrication Automotive fabrication Thin sheet metal welding General engineering Maintenance and repair Professional TIG fabrication Technical Specification Brand: CK WorldwideSeries: 2 SeriesProduct Type: TIG Gas Lens Ceramic CupMaterial: Alumina CeramicTorch Compatibility: WP9, WP20 & Compatible 2 Series TIG TorchesConsumable Configuration: Standard Gas LensAvailable Cup Sizes: Various, Depending on Selected OptionWelding Process: TIG / GTAWApplication: Shielding Gas Distribution & Weld Pool Protection

CK Worldwide CK 9 & 20 Medium Backcap With O-Ring

CK 2 Series - CK9 & 20 Medium Length Backcap Common Part Code - 41V35 The CK 9 / 20 Medium Backcap With O-Ring is a high-quality replacement component designed for TIG welding torches, ensuring a secure and reliable seal while protecting the tungsten electrode. Manufactured to precise industry standards, this backcap provides durability, heat resistance, and a tight fit for optimal performance. Key Features: Durable Construction – Made from high-quality heat-resistant materials for long-lasting performance in demanding welding applications. Secure O-Ring Seal – Includes a precision-fit O-ring to ensure an airtight seal, preventing gas leaks and enhancing torch efficiency. Medium-Length Design – Offers a balance between accessibility and control, making it suitable for a wide range of TIG welding applications. Compatible with CK 9 & CK 20 Series Torches – Designed to fit CK Worldwide 9 and 20 series TIG torches, ensuring a seamless replacement. Easy Installation – Simply screws into place for quick and hassle-free replacement, minimizing downtime. Ideal For: Professional welders and fabricators Industrial and precision TIG welding applications Automotive and aerospace welding DIY welding enthusiasts Why Choose CK Worldwide?   CK Worldwide is a trusted name in premium TIG welding equipment, known for innovation, quality, and precision. The CK 9 / 20 Medium Backcap With O-Ring ensures a reliable, leak-free fit, helping you achieve consistent and high-quality welds every time.

CK Worldwide CK Flexloc FL150 TIG Torch With Swivel Head & Superflex Cable

The Flex-Loc™ series torch is a variable angle torch that locks into any position within a 360 degree rotation. Interchangeable heads allow different size tungsten and head sizes to be quickly and efficiently changed. The patented Flex-Loc™ TIG Torch is available in water cooled and gas cooled models. Great for applications requiring a unique angle yet allowing the user a rigid torch. Ergonomically designed to help eliminate fatigue.Applications: Cup walking on pipe root welds, welds that require a mirror to access weldment, welds requiring different tungsten sizes.   Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch 

CK Worldwide CK Flexloc FL130 TIG Torch With Swivel Head & Superflex Cable

The Flex-Loc™ series torch is a variable angle torch that locks into any position within a 360 degree rotation. Interchangeable heads allow different size tungsten and head sizes to be quickly and efficiently changed. The patented Flex-Loc™ TIG Torch is available in water cooled and gas cooled models. Great for applications requiring a unique angle yet allowing the user a rigid torch. Ergonomically designed to help eliminate fatigue.Applications: Cup walking on pipe root welds, welds that require a mirror to access weldment, welds requiring different tungsten sizes   ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch 

CK Worldwide CK Trimline TL26 3 Series TIG Torch With Superflex Cable

CK Trimline TL26 TIG Torch With Superflex Cable The CK Trim-Line™ TL26 Tig torch offers the same current ratings as the standard 26 models they replace while providing a smaller, lighter design for greater comfort and ease of use. Engineered for high amperage, air-cooled applications Trim-Line™ series TIG torches take advantage of a stream-lined torch body and handle design for a more comfortable fit in you hand, allowing you to do more welding per hour with less stress and strain. The gas cooled TL26 is rated for 200A at 100% duty cycle on AC. Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch 

Starparts Red 2% Thoriated Tungsten Electrodes

Starparts Red 2% Thoriated Tungsten Electrodes Starparts Red 2% Thoriated Tungsten Electrodes are premium-quality TIG welding electrodes designed to deliver excellent arc starting, superior arc stability, and long service life. Alloyed with 2% thorium oxide (ThO₂), these electrodes are ideal for DC TIG welding applications, offering outstanding performance when welding carbon steel, stainless steel, nickel alloys, titanium, copper, and other ferrous metals. Known for their excellent current-carrying capacity and resistance to contamination, 2% thoriated tungsten electrodes maintain a sharp point for longer, providing precise arc control and consistent weld quality. Their reliable performance makes them a popular choice for professional fabricators, maintenance engineers, pipe welders, and general engineering applications. Available in a range of diameters and supplied in convenient storage packs, Starparts Red 2% Thoriated Tungsten Electrodes are suitable for use with most DC TIG welding machines and are trusted for demanding industrial welding applications. Key Features: Premium 2% thoriated tungsten electrodes Colour coded red for easy identification Excellent arc starting and stability Ideal for DC TIG welding applications High current-carrying capacity Maintains a sharp point for precise arc control Long service life with excellent resistance to contamination Suitable for carbon steel, stainless steel, nickel alloys, titanium and copper Ideal for fabrication, pipe welding, maintenance and general engineering Specifications: Product Type: TIG Tungsten Electrode Brand: Starparts Tungsten Type: 2% Thoriated (ThO₂) Colour Code: Red Welding Current: DC Available Diameters: Various sizes available Applications: Carbon Steel, Stainless Steel, Nickel Alloys, Titanium, Copper and General Fabrication Important Safety Information:These electrodes contain thorium oxide, a naturally radioactive material. When grinding tungsten electrodes, always use suitable extraction or local exhaust ventilation (LEV) and wear appropriate respiratory protection to minimise exposure to grinding dust. Dispose of used electrodes in accordance with local regulations Ideally Suited To DC TIG Welding Applications Pack Of 10

SIF No. 968 Silicon Copper TIG Brazing Rods

A copper rod, containing 3% silicon and 1% manganese used for fusion welding materials of similar composition, copper alloys (brass) and for TIG brazing steels. It is also suitable for surfacing steel and dissimilar metal applications. Excellent performance on galvanized steel and provides good corrosion-resistance. Suitable for use in the ship building/offshore industries as well as the heating and ventilation industries for corrosion resistance, and tubular product fabrication. Can also be used for sculpture repair.  popularly used in TIG for brazing steel and cast iron to copper, brass and bronze. 

SIF No.44 Nickel Aluminium Bronze TIG Brazing Rods

Nickel aluminium bronze for AB2 material and marine/corrosive applications and can be used for the assembly of cupro-aluminium materials of similar composition. Applications: ship propellers, parts for turbines, bearings, valves, sifters, pumps, pipe systems, apparatus engineering, containers. Overlay welding on steel and aluminium bronze including multicomponent alloys

SIF No.32 Aluminium Bronze TIG Brazing Rods

This is a 90/10 aluminium bronze rod suitable for welding materials of a similar composition. br / It is used for surfacing and dissimilar metal joints br / Also TIG brazing on ferrous and dissimilar metals. Suitable for use in ship-building, offshore power generation, and the repair and maintenance process industry. An excellent alloy for building up or over-lapping for wearresistance and corrosion-resistance. 

Nevada Style Welding Crocodile Earth Clamp

Nevada Style Earth Clamps – 200A, 350A & 500A Our Nevada Style Earth Clamps are designed for superior conductivity and durability, making them ideal for welding and industrial applications. Built with high-quality materials, these robust clamps ensure a secure and efficient connection to the workpiece, minimizing resistance and maximizing performance. Key Features: High Conductivity – Ensures reliable current transfer for optimal welding performance. Heavy-Duty Construction – Made from durable materials to withstand tough working conditions. Secure Grip – Strong spring mechanism provides a firm connection for safety and efficiency. Versatile Options – Available in 200A, 350A, and 500A to suit different power requirements. Amperage Options: 200A – Suitable for light to medium-duty welding applications. 350A – Ideal for professional and industrial use with moderate power demands. 500A – Heavy-duty performance for high-power welding and fabrication work. Perfect for workshops, fabrication, and industrial welding setups, our Nevada Style Earth Clamps deliver reliability and performance where it matters most. Upgrade your welding setup today with the right amperage clamp for your needs!

Furick Mooseknuckle 14 Ceramic Cup Kit

Same great #14 as the glass version. This full ceramic model comes with and spare screen and this model threads on your 45V44 gas lens if you have a 9 or 20 torch. If you have a 17,18 or 26 torch you will need the adapter kit. This cup is recommended for DC only and 3/32 tungsten. It will give best results with 25-30 CFH of argon flow.

Supercast Ultima Cast Electrodes - 2KG

SUPER CAST ULTIMA AWS A 5.15 : ENi-C1  Excellent Weldability Easy Slag Removel Crack Resistant Excellent For Joining and Repairing of Grey Cast Iron Description Super Cast Ultima is a Nickel electrode for welding of grey cast iron, malleable iron, cast iron and for welding on fatigued cast parts. For rectification of castings. Super Cast ultima gives perfect welding results even at low amperage's. The arc is smooth and intensive, with low spatter, easy removal of slag. The weld is soft machinable, also in the fusion zone.  Typical weld metal Chemical composition (%) C Si Mn Ni Fe 1.00 0.50 .0.35 97.50 REM All weld metal mechanical properties(typical): Tensile strength N/mm2 Hardness HB  450  165 approx.  Welding guide. Clean welding area carefully and remove cast skin from base material. Low heat input during welding is required. On thicker material preheating up 150°C is recommended. Weld bead width is not to be lager than twice of electrode diameter, maximum length 10 times diameter,in a single pass. To reduce the tension the weld should be penned just after welding. Allow the work piece to cool slowly on completion of welding. Weld deposits are fully machinable.

BÖHLER Bohler QE 6013 RC Mild Steel Welding Electrode (Stick Rods) 5KG

Bohler QE 6013 Mild Steel Welding Rods 5KG The Böhler Q E 6013 RC Mild Steel Welding Electrodes are versatile E6013 rutile-cellulosic stick electrodes designed for general-purpose MMA welding of mild and unalloyed steels. Offering excellent weldability and reliable arc striking, these electrodes are an excellent everyday choice for fabrication, repair, maintenance, assembly and workshop welding. Their excellent gap-bridging characteristics also make them particularly useful for tack welding and joints with less-than-perfect fit-up.  

Fronius Leather Welding Jacket Highend

The Fronius HighEnd leather welding jacket is made from a smooth, elastic calf leather and is manufactured to EN 11611: 2008-2-A1 standard. The button placket and stand-up collar can be closed with Velcro and the sleeves are equipped with elastic bands. The high-quality leather jacket is available in sizes S to XXXXXL.  

Parweld Round Welding Goggles Flip Up

Parweld Flip Up Welding Goggles

Flip Up Welding Goggle Parweld’s range of protective eyewear offers the user a lightweight range whilst ensuring maximum comfort.

CK Worldwide CK20 (250A) 2 Series Watercooled TIG Torch With Superflex Cables

2 Series CK20 Water Cooled 250amp Rated TIG Torch Most popular water-cooled torch Largest water jacket available: 300% more cooling Largest metal mass insert More mass in the head of the torch equals more efficient heat dissipation Constructed with a hardened brass alloy head to reduce thread damage Fail-safe hose connections eliminates wire ties for a positive seal   Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications   CK Colour Coded Superflex Cable 3/8" gas fittings Colour coded leads for quick identification Black argon hose Blue water hose Red power cable ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch 

CK Worldwide CK9FX TIG Torch Set With Flexi Head & Superflex Cable Gas-Cooled 125A Rated

CK 9 Flex Head, Gas Cooled 125amp TIG Torch With Superflex Cable Light weight, light duty torch Constructed with a hardened brass alloy head to reduce thread damage Silicon rubber insulation provides best protection against high frequency leakage Fitted with CK's Superflex Cable Lightest most flexible cable assemblies available Available for all gas-cooled or water-cooled torches Lightweight silicon rubber hose with nylon overbraid protection to resist abrasion Replaces heavy, stiff cables increasing range of motion Stays flexible even in the coldest environments Great for intricate precise welding applications ***Please note all CK torches come with a 3/8" BSP Female Nut Connection only, you WILL need a power adaptor for all the torch range and a button switch and switch plug to suit your specific machine should you require the use of a switch 

CK Worldwide CK 0.8% Zirconiated White Tungsten Pack Of 10

0.8% ZIRCONIATED (WHITE) EWZr-8/WZ8 Principal Oxide: 0.7-0.9% Zirconium Oxide 0.8% Zirconiated (White). Best for use in Alternating Current (A/C) for aluminium alloys and magnesium alloys using inverter or transformer based constant current power sources. Balls well, handles higher amperage than pure tungsten with less pitting, better arc starts and arc stability than pure tungsten.