EWM Picotig 220 Puls DC 5P TIG Welder Power Source Only

EWM Picotig 220 Puls DC 5P Power Source Only  TIG DC inverter welding machine, portable, gas-cooled, 5-pole, with PFC module High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology TIG DC and TIG pulse Non-latched/latched operation spotmatic and spotArc® MMA, MMA pulse, MMA cel, MMA cel pulse Robust housing with impact-resistant plastic cover 5-pole, digital welding torch connection with X technology allows users to connect Retox XQ welding torches Comfort 3.0 mini control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters Splash-proof in line with IP23 Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed Generator-compatible, even with long mains leads High mains voltage tolerance Consumables box in the handle – consumables always safely stored and within reach Cable holder for holding mains cable as standard Protective cap provided as standard protects the control against water, dirt and impact Adjustable hot start current and hot start time Adjustable Arcforce Antistick function Energy-saving thanks to high efficiency and standby function 3.5 m mains supply lead with 16 A shock-proof plug Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

EWM Tetrix XQ 230 Puls AC/DC TIG 5P With Expert 3.0 Control Panel Package Builder

EWM Tetrix XQ 230 Puls AC/DC TIG 5P With Expert 3.0 Control Panel Package Builder This highly efficient TIG welder has standby functionality and is the latest generation EWM TIG AC/DC inverter machine, it features TIG AC, TIG DC and TIG pulse, MMA welding, MMA pulse welding, MMA Cel and MMA Cel Pulse. This is a modular machine which is capable of TIG AC/DC and TIG pulse, MMA welding and MMA Cel Pulse. It also has ActivArc and Spotarc technology.  Use the package uilder to spec your machine to your exact requirements   TIG Welding: Temperature and speed controlled fan for cooling which reduces contamination and noise emissions because the fan only is on when required. Remote control and function torch connection compatibility. Simple and tool free welding polarity reversal. IP23 splash proof standards. Robust case. Why we love the Tetrix XQ230 Puls AC/DC: Flexfit case system allows accessories and parts to be added using standard slot nuts. Expert 3.0 control with 7 inch screen- easy to see and use. LED information bar to show current status.  Optional connection to network through Wifi or LAN. High capacity cooling system using the 1500 W high performance centrifugal pump with 8 litre coolant tank- this saves money on consumable costs.  High mains voltage tolerance. Generator compatible. Consumables box in the handle. Description: Modular AC/DC TIG inverter welding machine of the latest generation TIG AC/DC, TIG DC and TIG pulse activArc® and spotArc® MMA, MMA pulse, MMA cel, MMA cel pulse Machine configuration ex works: Tetrix XQ 230 puls AC/DC with Comfort 3.0 DC machine control, 3.5 m mains cable including mains plug and 5-pole connection socket compatible with EWM X technology Tried-and-tested Comfort 3.0 control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters Robust housing with impact-resistant plastic cover Provided ex works ready for water block connection – guarantees ultimate flexibility in industry and trade Splash-proof in line with IP23 Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed Generator-compatible, even with long mains leads High mains voltage tolerance Consumables box in the handle – consumables always safely stored and within reach LED status bar indicates the current operating status with colours Optional network connectivity with ewm Xnet software via LAN or WiFi gateway 3.5 m mains lead with 16 A earthed plug Controls: Popular, praised and simply indispensable 7" Digital Screen  Five favourites buttons Click wheel for convenient use with welder’s gloves Reliable push-button operation Direct access to all main functions All parameters at a glance AC and DC versions available   Welding process DC TIG   TIG AC   MMA DC   MMA AC   E-Hand cel Operating modes Non-latched 2T   Latched 4T   spotArc   spotmatic AC functions AC tungsten balling   AC sine   AC trapezoidal   AC rectangle   AC balance   AC amplitude balance   AC frequency: 30 Hz to 300 Hz   Automatic AC frequency   AC commutation optimisation for highest arc stability Ignition options HF   Liftarc Pulse type Average value pulsing (0.2 Hz–20 kHz) incl. waveform setting (soft, middle, hard)   Thermal pulsing (time pulsing)   AC special MMA functions Hotstart   Arcforce   Antistick   Average value pulse welding Functions activArc   Automatic gas post-flow function   Cable resistance alignment Job functions Number of freely definable Jobs 100 TIG, 8 MMA, 8 MMA Cel

Rotabroach Element 75 Magnetic Drill Cutter

ELEMENT 75 Powerful 1800w motor with a two speed mechanical gearbox. 23.5kg: Lighter and more compact than other heavy-duty drills. Suitable for drilling up to 75mm diameter by 75mm depth. CutSmart Technology – designed to protect your motor and cutter, prolonging tool life. Quick release interchangeable handle – allowing you to operate the mag drill from either side and improving accessibility. Internal cabling reduces the risk of damage and downtime for your magdrill. Internal cooling – keeping your mag drill cool and allowing you to drill for longer. Features a swivel base. Twist drill, threading and countersinking capabilities. Dual motor protection, minimising wear and downtime of this magdrill

Rotabroach Element 50 Low Profile Mag Drill Cutter

1200W motor with variable, 6-speed setting. Extremely lightweight for ease-of-use at just 11kg. Cutting diameter and depth of cut to 50mm- The largest capacity of any Low Profile drill on the market. CutSmart Technology – designed to protect your motor and cutter, prolonging tool life. Quick release interchangeable handle – allowing you to operate the mag drill from either side and improving accessibility. Internal cabling reduces the risk of damage and downtime for your magdrill. Internal cooling – keeping your mag drill cool and allowing you to drill for longer. The smallest magdrill in the Element range at just 179mm in height, capable of reaching tighter spaces than ever before. Can be used to countersink up to 30mm. Dual motor protection, minimising wear and downtime of this magdrill.

Stronghand Tools Stronghand Inserta Locking Pliers For 16D Holes

Stronghand Inserta Pliers - Fits All 16mm hole Welding Tables Insert into Ø16 mm for fast hold-down clamping. Mount on the Right Angle Bracket, Riser Block, or Clamping Squares for push down clamping at an elevated height for taller workpieces. The patented rear crank handle allows clamp pressure adjustment while the clamp is in locked position. Use the crank handle to pre-set the clamp opening in repetitious clamping applications

Stealth XG Flip Up Airfed Welding & Grinding PAPR Helmet Package

Stealth XG Flip UP Welding & Grinding PAPR Helmet Package This comprehensive package includes an auto-darkening helmet, a high-performance blower unit, filters, and a long-lasting battery, all neatly packed in a sleek carrying bag for your convenience. Key Features: Auto-Darkening Helmet: Offers superior protection and visibility, adjusting seamlessly to varying light conditions. Advanced Blower Unit: Delivers a steady flow of clean air over your head and face, effectively preventing welding fumes and grinding dust from entering the mask. Ergonomic Design: The flip-up welding screen allows for easy transitions between welding, grinding, fitting, and measuring without needing to remove the helmet. Portable Convenience: The stylish carrying bag ensures you can transport and store your equipment 2 Year warranty Helmet Features     CE Classification 1/1/1/1   View size 100 x 60mm   Arc sensors 4   Shade range 4/5-9/9-13EW   Delay range 0.1-0.9s   Power on/off fully automatic   Switching time 6Kg 0.8ms   Grinding function yes   Cutting function yes,shade 5 and 8 adjustable   Low amperage TIG rated 3A   Power supply Li-ion rechargeable PAPR Features     EN12941/TH3 PR SL approval     Automatically variable air flow control - 170-200 -230 l/min     Auto shutdown in standby mode if unused for 30. minutes     LCD Air flow level and data   LCD Battery life   LCD Filter condition   Warning light and audio alarms with vibration for: Filter block,low battery and over heating   Noise Max 73dB   Dimensions 240 x 165 x 70mm (LxWxH)   Weight 1370g Inc belt,battery and filter   Battery operating time Up to 8 hours