Weld Star Weldstar FN55 E NiFe-Cl MIG Wire 15KG

Features and Applications Ferro-nickel solid wire used for welding cast iron and ductile iron. Suitable for dissimilar joints between cast iron, mild steel, low alloy and stainless steels. Recommended for welding high sulphur, phosphorous or lubricant-contaminated castings. Precision layer wound for superior wire feeding characteristics. Typically used for a range of repair and fabrication applications, including rebuilding shafts, wheels, critical joints between steel and cast iron etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Grey cast iron, malleable, nodular** Illustrative, not exhaustive list   Standards EN ISO 1071 - SC NiFe-1 AWS A5.15 - E NiFe-CI   Chemical Composition % C% Mn% Si% P% S%     max max max max max     2.00 0.80 0.20 0.03 0.03                   Fe% Ni% Cu% Al%       rem. 54.00 max max         56.00 2.50 1.00         Mechanical Properties Tensile Strength 400 - 579 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, Ar + 1-2% O2   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar Alloy 82 NiCr-3 MIG Wire 15KG

Features and Applications Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Precision layer wound for superior wire feeding characteristics. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF