Beltit BF Powerfile Air Tool M/C Only

Beltit BF Powerfile Air Tool M/C Only  All round powerfile which is ideal for general fabrication work, de-burring, roughing, blending or dressing as well as weld removal. This machine has the benefit of 360 degree rotation in the handle and motor. This machine has 0.5HP and weighs a total of 1.25kg so is lightweight and portable.  For our full range of abrasive finishing systems click here.   This Beltit Powerfile Air tool is machine only, the machine arms must be purchased additionally.    Applications of the Powerfile Air Tool  Deburring Weld removal Blending Dressing General fabrication work   

Beltit BG20 Powerfile 110V Fixed 520x20mm

Beltit BG20 Powerfile 110V Fixed Arm (520mmx20mm) The 110V GG20 Beltit Powerfile is a powerful motorised powerfile sander. The handheld sander is ideal for use on mild steel and during general fabrication work. The single speed motor is ideal for dressing out welding spatter or deburring laser cut edges. The BG20 is suitable for many environments; sheet metal fabricators or for light foundry work.   For our full range of abrasive finishing systems click here.   BG20 120V Machine specification: Power supply: Beltit BG 110 volt Arm for belt: 520mm Belt width: 20mm Weight: 2.4kg Power: 570 watt motor   Applications of this machine: Weld and splatter removal, dressing and finishing MIG welds in difficult areas   Best belts for this machine: 40 grit: FX87/40/520X20 60 grit: FX87/60/520X20 80 grit: FX87/80/520X20

Beltit SH Powerfile 110V + 1 Arm

Beltit SH Powerfile & 1 Arm- 110V  This 110V handheld machine is the ideal choice for polishing and finishing all stainless steel, the handle and arm can be rotated up to 270 Degrees. This handheld machine comes equipped with 1 arm but additional arms are available and easy to install. Variable speed allows the user to get the best finish and polish possible. Weighing in at 2.2kg this is a lightweight and portable handheld device.  For our full range of abrasive finishing systems click here.   Machine Specification: Model: Beltit SH5 Voltage:110V Power:1100w Weight: 2.2kg Belt size- 533x13mm  

Beltit SH Powerfile 110V +3 Arms

Beltit SH Powerfile 110V with 3 Arms This 110V handheld machine is the ideal choice for polishing and finishing all stainless steel, the handle and arm can be rotated up to 270 Degrees. This handheld machine comes equipped with 3 arms but additional arms are available and are easy to install. Variable speed allows the user to get the best finish and polish possible. Weighing in at 2.2kg this is a lightweight and portable handheld device.  For our full range of abrasive finishing systems click here.     Machine Specification: Model: Beltit SH5 Voltage:110V Power:1100w Weight: 2.2kg Belt sizes- 533x13mm, 533x3mm, 533x6mm   

Beltit Powerfile 110V M/C Only

Beltit SH Powerfile 110V Machine Only  This 110V handheld machine is the ideal choice for polishing and finishing all stainless steel, the handle and arm can be rotated up to 270 Degrees. This handheld machine comes with no arms but additional arms are available and are easy to install. Variable speed allows the user to get the best finish and polish possible. Weighing in at 2.2kg this is a lightweight and portable handheld device.  For our full range of abrasive finishing systems click here.     Machine Specification: Model: Beltit SH5 Voltage:110V Power:1100w Weight: 2.2kg Belt sizes- 533x13mm, 533x3mm, 533x6mm   

Beltit SH Powerfile 240V +1 Arm

Beltit SH Powerfile & 1 Arm- 240V  This 110V handheld machine is the ideal choice for polishing and finishing all stainless steel, the handle and arm can be rotated up to 270 Degrees. This handheld machine comes equipped with 1 arm but additional arms are available and easy to install. Variable speed allows the user to get the best finish and polish possible. Weighing in at 2.2kg this is a lightweight and portable handheld device.  For our full range of abrasive finishing systems click here.   Machine Specification: Model: Beltit SH5 Voltage:240V Power:1100w Weight: 2.2kg Belt size- 533x13mm  

Beltit SH Powerfile 240V +3 Arm

Beltit SH Powerfile & 1 Arm- 240V This 240V handheld machine is the ideal choice for polishing and finishing all stainless steel, the handle and arm can be rotated up to 270 Degrees. This handheld machine comes equipped with 3 arms but additional arms are available and easy to install. Variable speed allows the user to get the best finish and polish possible. Weighing in at 2.2kg this is a lightweight and portable handheld device.  For our full range of abrasive finishing systems click here.   Machine Specification: Model: Beltit SH5 Voltage:240V Power:1100w Weight: 2.2kg Belt size- 533×3, 533×6 & 533x13mm   

Beltit SH Powerfile 240V M/C

Beltit SH Powerfile 240V Machine Only This 110V handheld machine is the ideal choice for polishing and finishing all stainless steel, the handle and arm can be rotated up to 270 Degrees. This handheld machine comes with no arms but additional arms are available and are easy to install. Variable speed allows the user to get the best finish and polish possible. Weighing in at 2.2kg this is a lightweight and portable handheld device.  For our full range of abrasive finishing systems click here.     Machine Specification: Model: Beltit SH5 Voltage:240V Power:1100w Weight: 2.2kg Belt sizes- 533x13mm, 533x3mm, 533x6mm   

Beltit Sh Powerfile 240V Kit

Beltit SH Powerfile 240V Kit The Beltit SH Powerfile is a variable speed machine, polishing and finishing stainless steel is easy with this handheld machine. This is a kit package with carry case and a range of 80 belts included. The 240V machine has variable speed option. The interchangeable arms can be rotated through 270 degrees.    Machine Specification: Model: Beltit SH5 Voltage:110V Power:1100w Weight: 2.2kg Belt sizes- 533x13mm, 533x3mm, 533x6mm    For our full range of abrasive finishing systems click here.     The SH5K3B kit comes complete with machine plus… +3 arms for belts of size 533×3, 533×6 & 533x13mm (BF/ARM/50081RVB, BF/ARM/50051B, BF/ARM/50051BOB) 80 abrasive belts designed for stainless steel weld removal, sanding and finishing.  All the cloth abrasive belts are supplied with the top coated Cibo Ceramic abrasive grain to ensure premium performance and will include: 20 belts  60 grit,   533 x 13mm 20 belts  80 grit,   533 x 6mm 20 belts  120 grit, 533 x 13mm  10 belts  Medium grade conditioning belts, 533 x 6mm 10 belts  V Fine grade conditioning belts, 533 x 13mm

Beltit SH Powerfile Air Tool Kit

Beltit SH Powerfile Kit The Beltit SH Powerfile is a variable speed machine, polishing and finishing stainless steel is easy with this handheld machine. This is a kit package with carry case and a range of 80 belts included. This machine has variable speed option. The interchangeable arms can be rotated through 270 degrees.    Machine Specification: Model: Beltit SH5 Voltage:110V Power:1100w Weight: 2.2kg Belt sizes- 533x13mm, 533x3mm, 533x6mm    For our full range of abrasive finishing systems click here.     The SH5K3B kit comes complete with machine plus… The SH5K3B kit comes complete with machine plus… 3 arms for belts of size 533×3, 533×6 & 533x13m BF/ARM/50081RVB, BF/ARM/50051B, BF/ARM/50051BOB 80 abrasive belts designed for stainless steel weld removal, sanding and finishing.  All the cloth abrasive belts are supplied with the top coated Cibo Ceramic abrasive grain to ensure premium performance and will include: 20 belts  60 grit,   533 x 13mm 20 belts  80 grit,   533 x 6mm 20 belts  120 grit, 533 x 13mm 10 belts  Medium grade conditioning belts, 533 x 6mm 10 belts  V Fine grade conditioning belts, 533 x 13mm   The arms are easily interchangeable, this machine is ideal for stainless steel and balustrading work. 

Beltit Finipower Inline sander 230V

Finipower Inline Sander 230V  The Finipower In line sander from Cibo is a variable speed handheld machine which has a reciprocating head which applies a satin grain finish on corners of box tubes and frame work. This is done by removing weld discolouration, removes scrathes and other damage, restores and blends with original finish. Motor is protected against dust, continuously adjustable RPM, overload protection.   The stroke frequency is between 2500-5250 a minute, the machine weights less than 2kg which means it is portable and light enough for everyday work.  Cibo have undertaken vibration and sound testing according to EN 60745 and EN 60745 respectively.    Vibration test:  5.1 m/s2 k+1.5m/s2   Sound Pressure  -79.5 dB (A) K=3dB 

Cibo Finipower PTX Machine Stainless Steel Fabricator Kit-230V

Finipower Stainless Steel Fabricator Kit 230V This kit has all the products needed to begin stainless steel fabrication work, the variable speed grinder allows you to achieve a flawless high quality finish. The fabrication kit includes the 230V Finipower Plus 1700 Watt variable speed grinder, it also includes a range of tools which fit on this model.  Weld removal is easy on stainless steel box section, use the 80 grit ceramic fibre discs, this leaves a nice finish which can easily be blended. The FMCMC Ginger Ninja brush can be used to restore satin finish. To refine the finish even further use the FMTM 80 grit tex brush. For tube work the RCD discs will remove blend and fillet the tig weld to leave a 240 grit finish in one action. THe SAG 5 unitised disc will do a good job. Also included is the Med S handpads, this ensures a 240 grit satin finish.     

Cibo SMFP Finipower 110V Polisher

Finipower 110V Polisher This 110v polisher is a 125mm variable speed sander which is great for use in any polishing process, including: stone, glass, brass, copper and automotive paints.  Vibration data: base test data was conducted and this depends on grade, density of the wheels used and the speed of the machine. Finipower-1.59m/s2.   This variable speed grinder is ideal for stainess steel due to: stainless steel heats quicker than steel therefore will work harden if operating at the normal grinder speed. 11000rpm is too high (standard UK grinders are around this) the variable speed means much more control so reduces any chance of damage.  increased heat causes the abrasive to glaze over due to heat or will increase consumable use, lower speeds prevent this.  Powerful variable speed grinder: This machine is heavier in weight to other grinders but it is higher powered. The higher torque means higher grinding and finishing quality.   Cibo RCD Rapid Combi Discs  Increased disc life, better finish and lower costs with the Finipower plus.  these discs operate at their best at 3500-4000 rpm so the Finipower Plus is ideal. 

Cibo SMFP Finipower 230V Polisher

Finipower 230V Polisher This 230v polisher is a 125mm variable speed sander which is great for use in any polishing process, including: stone, glass, brass, copper and automotive paints.  Vibration data: base test data was conducted and this depends on grade, density of the wheels used and the speed of the machine. Finipower-1.59m/s2.   This variable speed grinder is ideal for stainless steel due to: stainless steel heats quicker than steel therefore will work harden if operating at the normal grinder speed. 11000rpm is too high (standard UK grinders are around this) the variable speed means much more control so reduces any chance of damage.  increased heat causes the abrasive to glaze over due to heat or will increase consumable use, lower speeds prevent this.  Powerful variable speed grinder: This machine is heavier in weight to other grinders but it is higher powered. The higher torque means higher grinding and finishing quality.   Cibo RCD Rapid Combi Discs  Increased disc life, better finish and lower costs with the Finipower plus.  these discs operate at their best at 3500-4000 rpm so the Finipower Plus is ideal.     

Cibo SMFP PLUS Finipower 110V Variable Speed Grinder

SMFP Plus Finipower 110V Variable Speed Grinder This 110v handheld machine is the ideal solution to grinding and polishing stainless steel and non-ferrous metals, maximum torque ensures a flawless finish, we recommend you use this with the Cibo time saving kits found here.   This machine has a minimum speed of 2,000rpm and a maximum of 7200rpm. In order to save on consumables (by up to 6x), use the recommended speed. These are outlined below:  Grinding with coarse flap discs: 6-7,000 rpm Fibre/sanding discs and RCD type: 4-5000 rpm Finishing and pre-polishing: 3-4,000 rpm        

Cibo SMFP PLUS Finipower 230V Variable Speed Grinder

SMFP Plus Finipower 230V Variable Speed Grinder This 110v handheld machine is the ideal solution to grinding and polishing stainless steel and non-ferrous metals, maximum torque ensures a flawless finish, we recommend you use this with the Cibo time saving kits found here.   This machine has a minimum speed of 2,000rpm and a maximum of 7200rpm. In order to save on consumables (by up to 6x), use the recommended speed. These are outlined below:  Grinding with coarse flap discs: 6-7,000 rpm Fibre/sanding discs and RCD type: 4-5000 rpm Finishing and pre-polishing: 3-4,000 rpm

Cibo Finitube-110V- hand held tube polisher kit

Cibo Finitube Handheld Tube Polisher Kit This handheld tube polisher from CIBO is capable of high quality satin finishing and polishing tubes as well as balastrades and handrails. This is a 110V machine, TEC Products also stock the 230V option, click here for more options. The handheld polisher has a flexible arm which easily wraps around tubes- 270 degrees can be covered in one action on 50mm tube. This creates a smooth and consistent finish. Cibo have created the Finitube to have a unique action which allows the tube to be used as additional contact wheel for abrasive belts, this means that you can finish bends as easily as straight sections. The handheld abrasive finishing machine is supplied in a strong metal case with a range of abrasives, see below for full range of contents.   Hints for high quality finish: For a standard 240 grit satin grain use the Medium conditioning belt as your final finishing belt. Looking to match to a Q-Rail type finish? The blue very fine conditioning belt is normally a great option for blending and restoring the finish   This package from TEC Products offers: Finitube Tube Polishing Machine Coarse Surface Conditioning Belt (x1) Medium Surface Conditioning Belt (x2) Very Fine Surface Conditioning Belt (x1) FF87 Ceramic Belts (120, 240 & 320 Grit) (x6) Trizact Finishing Belts (A30 & A45 Grit) (x2) Tex Sheets (x8) FORU Rubber Sanding Block (x1) Inoxiclean Stainless Steel Cleaner (x1)

Cibo Finitube-230V-Hand Held Tube Polisher kit

Cibo Finitube Hand Held Tube Polisher Kit This handheld tube polisher from CIBO is capable of high quality satin finishing and polishing tubes as well as balastrades and handrails. This is a 230V machine, TEC Products also stock the 110V option, click here for more options. This handheld polisher has a flexible arm which easily wraps around tubes. 270 degrees can be covered in one action on 50mm tube. This creates a smooth and consistent finish. The Cibo Finitube has a unique action which allows the tube to be used as additional contact wheel for abrasive belts, this means that you can finish bends as easily as straight sections. The handheld abrasive finishing machine is supplied in a strong metal case with a range of abrasives, see below for full range of contents. The hand held polisher is easy to use due to the well positioned ergonomic handball which means all tube types can be clamped perfectly.   Hints for high quality finish: For a standard 240 grit satin grain use the Medium conditioning belt as your final finishing belt. Want to match to a Q-Rail type finish? The blue very fine conditioning belt is normally a great option for blending and restoring the finish   This package from TEC Products offers: Finitube Tube Polishing Machine Coarse Surface Conditioning Belt (x1) Medium Surface Conditioning Belt (x2) Very Fine Surface Conditioning Belt (x1) FF87 Ceramic Belts (120, 240 & 320 Grit) (x6) Trizact Finishing Belts (A30 & A45 Grit) (x2) Tex Sheets (x8) FORU Rubber Sanding Block (x1) Inoxiclean Stainless Steel Cleaner (x1)

Cibo FinitEasy 110V Fillet Weld Grinder set

Cibo FinitEasy 110V Set The CIBO FinitEeasy is the original and still the best fillet weld grinder. The 110 volt FinitEasy fillet weld grinder has flanges for 22mm and 25.4mm discs so it can be used with almost any abrasive product including cutting, grinding & flap discs as well as the more well known unitised discs for fillet weld grinding & polishing. Use the MA8 or the new GA7 and GA8 unitised discs for removing fillet welds and polishing stainless steel tig welds in one simple action. We stock a range of Cibo products, take a look here or get in touch for our full range.    FAQ's Can I use the FinitEasy on aluminium or brass? Most definitely. The unitised products work just as well on aluminium and brass as they do on stainless steel. If you like the GA8 disc on a stainless TIG weld then just drop down a grade or 2 to maintain control and ensure a great quality finish.   Contents of this package: 1x FinitEasy Fillet Weld Grinder 1x Abrasive File 2x FA Unitised Discs (FA3 & FA5) 3x SA Unitised Discs (SA5, SA6 & SA7) 1x MA Unitised Disc 1x TA Unitised Disc 2x GA Combi Unitised Discs (GA7 & GA8) 1x SAG Unitised Finishing Disc 1x RCD Flap Disc 1x Felt Finishing Disc 1x PV/102 Polishing Compound 1x Tex Open Belt 1x FORU Rubber Sanding Block 1x Inoxiclean Stainless Steel Cleaner   Use This handheld abrasive machine with: SA or MA unitised discs to remove TIG welds in corners and to satin finish or mirror polish in two or three steps Cutting and grinding discs where you need access in difficult to reach areas  Felt and cotton mops for mirror polishing CIBO Time Saving Kits set 2,3,5 or 6 for a complete process

Cibo FinitEasy 230V Fillet Weld Grinder set

Cibo FinitEasy 230V Set  The CIBO FinitEasy is the original and still the best fillet weld grinder. The 230 volt FinitEasy fillet weld grinder has flanges for 22mm and 25.4mm discs so it can be used with almost any abrasive product including cutting, grinding & flap discs as well as the more well known unitised discs for fillet weld grinding & polishing. Use the MA8 or the new GA7 and GA8 unitised discs on the FinitEasy for removing fillet welds and polishing stainless steel TIGwelds in one simple action.   FAQ's Can I use the FinitEasy on aluminium or brass? Most definitely. The unitised products work just as well on aluminium and brass as they do on stainless steel. If you like the GA8 disc on a stainless tig weld then just drop down a grade or 2 to maintain control and to ensure a great quality finish.  We now stock a range of Cibo products, take a look here or get in touch for our full range.    Contents: 1x FinitEasy Fillet Weld Grinder 1x Abrasive File 2x FA Unitised Discs (FA3 & FA5) 3x SA Unitised Discs (SA5, SA6 & SA7) 1x MA8 Unitised Disc 1x TA Unitised Disc 2x GA Combi Unitised Discs (GA7 & GA8) 1x SAG Unitised Finishing Disc 1x RCD Flap Disc 1x Felt Finishing Disc 1x PV/102 Polishing Compound 1x Tex Open Belt 1x FORU Rubber Sanding Block 1x Inoxiclean Stainless Steel Cleaner   Use the FinitEasy with: SA or MA unitised discs to remove tig welds in corners and to satin finish or mirror polish in two or three steps Cutting and grinding discs where you need access in difficult to reach areas Felt and cotton mops for mirror polishing  CIBO Time Saving Kits set 2,3,5 or 6 for a complete process

Cibo Finimaster Pro 110V PTX Drum Sander machine

Cibo Finimaster Pro Drum Sander Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro  We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing  

Cibo Finimaster Pro 110V PTX Drum Sander Set 1 Kit

Cibo 110V Finimaster Pro Drum Sander (Set 1) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.  We stock a range of Cibo products, take a look here or get in touch for our full range.  Finimaster Drum Sander set 1 contents: FMCI 110v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5)   For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing    

Cibo Finimaster Pro PTX Sander 110V Set 2 Drum

Cibo Finimaster Pro 110V Drum Sander Set 2 The 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Better Access + Larger Wheels + Longer Life + Higher Quality Finish = Finimaster Pro  We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    We stock a range of Cibo products, take a look here or get in touch for our full range.    This Cibo Finimaster Drum Sander Set 2 Contains: FMCI 110v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMCM Combi Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5) Inoxiclean Stainless Steel Cleaner (x1 can) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m) Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing Grain finishing: Use the Finimaster Pro with abrasive sleeve on inflatable tyre, then a wide range of tex and combination wheels to get the desired finish.  Tube finishing: Use the drive roller with grip fixing belts to allow best satin finishing in the tightest locations.   This Cibo Drum stander is the ideal machine for sheet, round tube, square tube, square tube and box section finishing. Finimaster Pro Drum Sander has 5 inch diameter to give best quality, no mark, chatter free surface finish. 

Cibo Finimaster Pro 230V Drum Sander Machine only in case

Cibo Finimaster Pro Drum Sander  This is the 230V, machine only option for the Finimaster Pro Drum sander, it is designed for high quality satin polishing as well as sheet metal fabrication graining. The large diameter wheels ensure a chatter free experience making it easier to get the high quality satin finish desired.  M14 thread ensures that wheel changes are efficient and allow the sander to get into the edges. Cast iron handle ensures an ergonomic grip and high level of visibility when working with flat and rounded surfaces. Reduction in consumable cost due to larger wheels and sleeves.  Better access + larger wheels + longer life + higher quality finish = Finimaster Pro When grain finishing use the abrasive sleeves and inflatable tyre followed by a wide range of tex and combination wheels to achieve the desired finish. Tube finishing require a switch over to the drive roller with the grip fixing belts to allow higher quality finish even in tight locations.    Use the Cibo Finimaster Pro Drum Sander with:  – The FMSB/M drive wheels for satin finishing and mirror polishing round rubes– Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre– Tex /combi flap brushes for satin finishing– Sisal / cotton / flannel polishing wheels for high quality mirror polishing  

Cibo Finimaster Pro 230V PTX Drum Sander Set 1

Cibo Finimaster Pro Drum Sander (Set 1) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Contents of Set 1: FMCI 230v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5)   We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing    

Cibo Finimaster Pro 230V Drum Sander Set 2

  Cibo Finimaster Pro Drum Sander (Set 2) Cibo 110V Finimaster Pro Drum Sander is an excellent satin polisher and grain fabrication. The large diameter wheels ensures chatter free graining and allows for high quality finish. The M14 thread allows the wheels to be fitted efficiently and allows access to the edges. The cast aluminium handle ensures the machine is held comfortably and allows for total control and good visibility. The consumable costs are reduced due to larger wheels and sleeves.  Contents of Set 2: FMCI 230v Finimaster Pro Machine (x1) FMTM Tex Wheel (x1) FMCM Combi Wheel (x1) FMSBM Drive Wheel For Belts (x1) FMNUM Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x5) Inoxiclean Stainless Steel Cleaner (x1 can) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m)   We stock a range of Cibo products, take a look here or get in touch for our full range.  For the best grain finish use the Finimaster Pro with the abrasive sleeve on the inflatable type and then use tex and combination wheels to achieve the desired finish. When tube finishing use the drive roller with grip fixing belts, this allows the product to get into the tightest corners.    Drum Sander can be used with: FMSB/M drive wheels for satin finishing and mirror polishing round rubes Abrasive belts, from P36 up to non-abrasive scm belts for mirror polishing on the large footprint inflatable tyre Tex /combi flap brushes for satin finishing Sisal / cotton /flannel polishing wheels for high quality mirror polishing The Finimaster Pro is the best satin polishing machine for sheet, rounded, square tubing and box section finishing. This machine operates with 5 inch diameter wheels prevents chatter and high quality surface finish each time. 

Cibo Finimaster+Keyway Shaft 110V Machine only

Cibo Finmaster + Keymaster Shaft 110V machine only  This is the original 110V drum sander from Cibo, the 19mm keyway fixing fits all wheels, sleeves and drums. The Finimaster Keyway allows for sheet, round and square tubing as well as box section polishing. The keyway uses a 4 inch/100mm diameter wheel to allow for efficient and consistent satin or mirror finish. The wheels quickly can be changes using the 19mm keyway.  Use this machine with: Abrasive belts and sleeves (p36 to felts) with a large footprint inflatable tyre. tex/combi and abrasive cloth flap brushes for satin finishes Sisal/cotton/flannel polishing wheels for high quality mirror polishing the FMSB/1 drive wheels for satin finishing and mirror polishing of round tubes.  

Cibo Finimaster+Keyway Wheels 110V Set 2

110 volt Cibo Finimaster Keyway drum sander: This Cibo drum sander is the best for polishing sheet metal, round rube, square tube and box section. It is ideal to graining, satin finishing and polishing. The second set contains a wide range of abrasive belts or sleeves which will mount on the 19mm keyway shaft.    Why we love the Cibo Finimaster Keyway drum sander: – The FMNU inflatable wheel (supplied in set 2) can be used with a wide range of abrasive sleeves (from 36 grit to mirror polishing) – FMTA & FMCA wheels are ideal for satin polishing – The FMSB drive wheel means you can even polish and grain tubes with the Finimaster keyway   This set contains: FMBA Finimaster Basic Machine (x1) FMTA Tex Wheel (x1) FMCA Combi Wheel (x1) FMSB Drive Wheel For Belts (x1) FMNU Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x2) Inoxiclean Stainless Steel Cleaner (x1) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m)   Finimaster Keyway wheels connect directly onto the 19mm keyway.

Cibo Finimaster+Keyway Wheels 230V Set 2

230V Cibo Finimaster Keyway drum sander: This Cibo drum sander is the best for polishing sheet metal, round rube, square tube and box section. It is ideal to graining, satin finishing and polishing. The second set contains a wide range of abrasive belts or sleeves which will mount on the 19mm keyway shaft.    Why we love the Cibo Finimaster Keyway drum sander: – The FMNU inflatable wheel (supplied in set 2) can be used with a wide range of abrasive sleeves (from 36 grit to mirror polishing) – FMTA & FMCA wheels are ideal for satin polishing – The FMSB drive wheel means you can even polish and grain tubes with the Finimaster keyway   This set contains: FMBA Finimaster Basic Machine (x1) FMTA Tex Wheel (x1) FMCA Combi Wheel (x1) FMSB Drive Wheel For Belts (x1) FMNU Inflatable Wheel (x1) Surface Conditioning Belts (Coarse, Medium & Very Fine) (x4) Ceramic Abrasive Belts (40, 80 & 120 Grit) (x3) Trizact A300 Abrasive Belts (x2) FF87 Ceramic Abrasive Belts (80 & 120 Grit) (x2) Open Belts (x2) Inoxiclean Stainless Steel Cleaner (x1) FORU Rubber Sanding Block (x1) MHIT Stainless Steel Inoxitape (x1m)   Finimaster Keyway wheels connect directly onto the 19mm keyway.