Beltit BG10 Airfile Fixed Arm 330mmx10mm

Beltit BG10 Airfile Fixed Arm- 330mmx10mm This is a powerful machine, it has a fixed speed motor but has plenty of power when it is required. The 110V motor can be used on mild steel or for general fabrication work. Dressing out welding spatter or deburring laser cut edges are easy with this handheld air driven sander.   Ideal for use on mild steel and in auto repair or steel fabrication work. For our full range of abrasive finishing systems click here.   BG10 Air Machine Specification: Pneumatic: Beltit BG10 Arm: 330 x 10mm Belt Length: 330mm Belt width: 10mm Weight: 0.3kg Power: 0.8hp   Best Belts: 40 grit: TZ59/40/330X10 60 grit: TZ59/60/330X10 80 grit: TZ59/80/330X10 120 grit: TZ59/120/330X10  

Beltit BG20 Airfile Fixed Arm 520x20mm

Beltit BG20 AirFile Fixed Arm (520x20mm) This Beltit BG20 Airfile with fixed arm is a single speed air driven machine which is powerful and great when using on mild steel or for general fabrication work. For our full range of abrasive finishing systems click here.     Applications of this include: General fabrication work light foundry work weld spatter removal finishing MIG welds in awkward places   Best Belts: 40 grit: FX87/40/520X20 60 grit: FX87/60/520X20 80 grit: FX87/80/520X20

Beltit SH Powerfile 110V + 1 Arm

Beltit SH Powerfile & 1 Arm- 110V  This 110V handheld machine is the ideal choice for polishing and finishing all stainless steel, the handle and arm can be rotated up to 270 Degrees. This handheld machine comes equipped with 1 arm but additional arms are available and easy to install. Variable speed allows the user to get the best finish and polish possible. Weighing in at 2.2kg this is a lightweight and portable handheld device.  For our full range of abrasive finishing systems click here.   Machine Specification: Model: Beltit SH5 Voltage:110V Power:1100w Weight: 2.2kg Belt size- 533x13mm  

Beltit Powerfile 110V M/C Only

Beltit SH Powerfile 110V Machine Only  This 110V handheld machine is the ideal choice for polishing and finishing all stainless steel, the handle and arm can be rotated up to 270 Degrees. This handheld machine comes with no arms but additional arms are available and are easy to install. Variable speed allows the user to get the best finish and polish possible. Weighing in at 2.2kg this is a lightweight and portable handheld device.  For our full range of abrasive finishing systems click here.     Machine Specification: Model: Beltit SH5 Voltage:110V Power:1100w Weight: 2.2kg Belt sizes- 533x13mm, 533x3mm, 533x6mm   

Beltit SH Powerfile 240V +1 Arm

Beltit SH Powerfile & 1 Arm- 240V  This 110V handheld machine is the ideal choice for polishing and finishing all stainless steel, the handle and arm can be rotated up to 270 Degrees. This handheld machine comes equipped with 1 arm but additional arms are available and easy to install. Variable speed allows the user to get the best finish and polish possible. Weighing in at 2.2kg this is a lightweight and portable handheld device.  For our full range of abrasive finishing systems click here.   Machine Specification: Model: Beltit SH5 Voltage:240V Power:1100w Weight: 2.2kg Belt size- 533x13mm  

Cibo SMFP Finipower 110V Polisher

Finipower 110V Polisher This 110v polisher is a 125mm variable speed sander which is great for use in any polishing process, including: stone, glass, brass, copper and automotive paints.  Vibration data: base test data was conducted and this depends on grade, density of the wheels used and the speed of the machine. Finipower-1.59m/s2.   This variable speed grinder is ideal for stainess steel due to: stainless steel heats quicker than steel therefore will work harden if operating at the normal grinder speed. 11000rpm is too high (standard UK grinders are around this) the variable speed means much more control so reduces any chance of damage.  increased heat causes the abrasive to glaze over due to heat or will increase consumable use, lower speeds prevent this.  Powerful variable speed grinder: This machine is heavier in weight to other grinders but it is higher powered. The higher torque means higher grinding and finishing quality.   Cibo RCD Rapid Combi Discs  Increased disc life, better finish and lower costs with the Finipower plus.  these discs operate at their best at 3500-4000 rpm so the Finipower Plus is ideal. 

Cibo SMFP Finipower 230V Polisher

Finipower 230V Polisher This 230v polisher is a 125mm variable speed sander which is great for use in any polishing process, including: stone, glass, brass, copper and automotive paints.  Vibration data: base test data was conducted and this depends on grade, density of the wheels used and the speed of the machine. Finipower-1.59m/s2.   This variable speed grinder is ideal for stainless steel due to: stainless steel heats quicker than steel therefore will work harden if operating at the normal grinder speed. 11000rpm is too high (standard UK grinders are around this) the variable speed means much more control so reduces any chance of damage.  increased heat causes the abrasive to glaze over due to heat or will increase consumable use, lower speeds prevent this.  Powerful variable speed grinder: This machine is heavier in weight to other grinders but it is higher powered. The higher torque means higher grinding and finishing quality.   Cibo RCD Rapid Combi Discs  Increased disc life, better finish and lower costs with the Finipower plus.  these discs operate at their best at 3500-4000 rpm so the Finipower Plus is ideal.     

Cibo FinitEasy 110V Fillet Weld Grinder set

Cibo FinitEasy 110V Set The CIBO FinitEeasy is the original and still the best fillet weld grinder. The 110 volt FinitEasy fillet weld grinder has flanges for 22mm and 25.4mm discs so it can be used with almost any abrasive product including cutting, grinding & flap discs as well as the more well known unitised discs for fillet weld grinding & polishing. Use the MA8 or the new GA7 and GA8 unitised discs for removing fillet welds and polishing stainless steel tig welds in one simple action. We stock a range of Cibo products, take a look here or get in touch for our full range.    FAQ's Can I use the FinitEasy on aluminium or brass? Most definitely. The unitised products work just as well on aluminium and brass as they do on stainless steel. If you like the GA8 disc on a stainless TIG weld then just drop down a grade or 2 to maintain control and ensure a great quality finish.   Contents of this package: 1x FinitEasy Fillet Weld Grinder 1x Abrasive File 2x FA Unitised Discs (FA3 & FA5) 3x SA Unitised Discs (SA5, SA6 & SA7) 1x MA Unitised Disc 1x TA Unitised Disc 2x GA Combi Unitised Discs (GA7 & GA8) 1x SAG Unitised Finishing Disc 1x RCD Flap Disc 1x Felt Finishing Disc 1x PV/102 Polishing Compound 1x Tex Open Belt 1x FORU Rubber Sanding Block 1x Inoxiclean Stainless Steel Cleaner   Use This handheld abrasive machine with: SA or MA unitised discs to remove TIG welds in corners and to satin finish or mirror polish in two or three steps Cutting and grinding discs where you need access in difficult to reach areas  Felt and cotton mops for mirror polishing CIBO Time Saving Kits set 2,3,5 or 6 for a complete process

Cibo FinitEasy 230V Fillet Weld Grinder set

Cibo FinitEasy 230V Set  The CIBO FinitEasy is the original and still the best fillet weld grinder. The 230 volt FinitEasy fillet weld grinder has flanges for 22mm and 25.4mm discs so it can be used with almost any abrasive product including cutting, grinding & flap discs as well as the more well known unitised discs for fillet weld grinding & polishing. Use the MA8 or the new GA7 and GA8 unitised discs on the FinitEasy for removing fillet welds and polishing stainless steel TIGwelds in one simple action.   FAQ's Can I use the FinitEasy on aluminium or brass? Most definitely. The unitised products work just as well on aluminium and brass as they do on stainless steel. If you like the GA8 disc on a stainless tig weld then just drop down a grade or 2 to maintain control and to ensure a great quality finish.  We now stock a range of Cibo products, take a look here or get in touch for our full range.    Contents: 1x FinitEasy Fillet Weld Grinder 1x Abrasive File 2x FA Unitised Discs (FA3 & FA5) 3x SA Unitised Discs (SA5, SA6 & SA7) 1x MA8 Unitised Disc 1x TA Unitised Disc 2x GA Combi Unitised Discs (GA7 & GA8) 1x SAG Unitised Finishing Disc 1x RCD Flap Disc 1x Felt Finishing Disc 1x PV/102 Polishing Compound 1x Tex Open Belt 1x FORU Rubber Sanding Block 1x Inoxiclean Stainless Steel Cleaner   Use the FinitEasy with: SA or MA unitised discs to remove tig welds in corners and to satin finish or mirror polish in two or three steps Cutting and grinding discs where you need access in difficult to reach areas Felt and cotton mops for mirror polishing  CIBO Time Saving Kits set 2,3,5 or 6 for a complete process