Right Lines Carbide Burr 5 Piece Set With 6MM Shank

Right Lines Carbide Burr 5 Piece Set    This kit provides a convenient set of different shapes of carbide burrs for use on hard metal. Ideal for any engineering workshop. This carbide burr set is for use on hard metals such as mild steel, cast iron, stainless steel and hard alloys. It would be a useful resource for any workshop or maintenance department. The contents are as below:  Ferrous (Hard) Metal Set Carbide Burr Set of 5 Shapes Shape Diameter (mm) Length (mm) Spindle (mm) Cylinder, Flat End 9.6 19.2 6 Ball End 12.5 11.4 6 Round Taper 12.5 25.4 6 Flame 8.0 19.2 6 Ball Nosed Cone 8.0 25.4 6

90deg Countersink Carbide Burr 16mm Diameter Diamond Cut

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 8 mm in length total overall length 57 mm

90deg Countersink Carbide Burr 12.7mm Diameter Diamond Cut

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 6.3 mm in length total overall length 54 mm

36mm Carbide Burr 16mm Diameter Diamond Cut Flame

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 36 mm total overall length 80 mm

32mm Carbide Burr 12.7mm Diameter Diamond Cut Flame

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 32 mm in length total overall length 76 mm

19mm Carbide Burr 8mm Diameter Diamond Cut Flame

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 8 mm diameter and 19 mm in length total overall length 64 mm

25mm Carbide Burr 16mm Diameter Diamond Cut Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 25 mm in length total overall length 70 mm

25mm Carbide Burr 12.7mm Diameter Diamond Cut Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 25 mm in length total overall length 70 mm

19mm Carbide Burr 9.5mm Diameter Diamond Cut Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 9.5 mm diameter and 19 mm in length total overall length 64 mm

19mm Carbide Burr 8mm Diameter Diamond Cut Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 8 mm diameter and 19 mm in length total overall length 64 mm

19mm Carbide Burr 12.7mm Diameter Diamond Cut Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 19 mm in length total overall length 64 mm

18mm Carbide Burr 6mm Diameter Diamond Cut Pointed Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 6 mm diameter and 16 mm in length total overall length 50 mm

13mm Diamond Cut Carbide Burr 6.3mm Diameter Pointed Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 6.3 mm diameter and 12.7 mm in length total overall length 50 mm

25mm Carbide Burr 16mm Diameter Diamond Cut Round Tree

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 25 mm in length total overall length 70 mm

25mm Carbide Burr 12.7mm Diameter Fluted Cut Round Tree

Long Fluted Cut: For non-ferrous metals, toughened plastic and low density fibreglass. Excellent for alloy wheel refurbishment work. The burr head is 12.7 mm diameter and 25 mm in length total overall length 70 mm

25mm Carbide Burr 12.7mm Diameter Diamond Cut Round Tree

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 25 mm in length total overall length 70 mm

20mm Carbide Burr 8mm Diameter Diamond Cut Round Tree

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 8 mm diameter and 19 mm in length, total overall length 64 mm

19mm Carbide Burr 9.5mm Dia Fluted Cut Round Tree

Long Fluted Cut: For non-ferrous metals, toughened plastic and low density fibreglass. Excellent for alloy wheel refurbishment work. The burr head is 9.5 mm diameter and 19 mm in length, total overall length 64 mm

19 mm Carbide Burr 12.7mm Diameter Diamond Cut Round Tree

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 19 mm in length, total overall length 70 mm

Carbide Burr diameter 5.5mm Diamond Cut Teardrop 3mm shaft

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 5.5 mm diameter and 3 mm in length total overall length 38 mm

25mm Carbide Burr 16mm Dia Diamond Cut Teardrop

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16mm diameter and 25mm in length, total overall length 70mm

22mm Carbide Burr 12.7mm Dia Diamond Cut Teardrop

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 22 mm in length, total overall length 66mm

15mm Carbide Burr 8mm Dia Diamond Cut Teardrop

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 8 mm diameter and 13 mm in length total overall length 58mm

Carbide Burr 9.5mm Fluted Cut Ball

Long Fluted Cut: For non-ferrous metals, toughened plastic and low density fibreglass. Excellent for alloy wheel refurbishment work. The burr head is 9.5 mm diameter and 8 mm in length, the total overall length is 52 mm

Carbide Burr 8mm Diameter Diamond Cut Ball

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 8 mm diameter and 6.4 mm in length, the total overall length is 50 mm

Carbide Burr 6mm Diameter Diamond Cut Ball

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 6mm diameter and 5mm in length

Carbide Burr 3mm Diameter Diamond Cut Ball – 3mm shaft

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 3 mm diameter and 2.5 mm in length the total overall length is 38 mm

Carbide Burr 16mm Diameter Diamond Cut Ball

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 14 mm in length, the total overall length is 58 mm

Carbide Burr 16mm Diameter Diamond Cut Ball – 8mm Shaft

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 14 mm in length. the total overall length is 58 mm Note: this carbide burr has an 8mm spindle

Carbide Burr 12.7mm Diameter Diamond Cut Ball

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 11 mm in length, the total overall length is 55 mm

25mm Carbide Burr 16mm Diameter Diamond Cut Domed Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 25 mm in length, the total overall length is 70 mm

25mm Carbide Burr 16mm Dia Diamond Cut Domed Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 25 mm in length, the total overall length is 70 mm

19mm Fluted Cut Carbide Burr 9.5mm Diameter Domed Cylinder

Long Fluted Cut: For non-ferrous metals, toughened plastic and low density fibreglass. Excellent for alloy wheel refurbishment work. The burr head is 9.5 mm diameter and 19 mm in length, the total overall length is 64 mm

19mm Carbide Burr 9.5mm Diameter Diamond Cut Domed Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 9.5 mm diameter and 19 mm in length, the total overall length is 64 mm

19mm Carbide Burr 8mm Diameter Diamond Cut Domed Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 8 mm diameter and 19 mm in length, the total overall length is 64 mm

19mm Carbide Burr 12.7mm Dia Diamond Cut Domed Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 19 mm in length, the total overall length is 64 mm

16mm Carbide Burr 6mm Diameter Diamond Cut Domed Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 6 mm diameter and 16 mm in length, the total overall length is 50 mm  

14mm Carbide Burr 3mm Diameter Diamond Cut Domed Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 3 mm diameter and 14 mm in length, the total overall length is 38 mm

12.7mm Carbide Burr 6.3mm Dia Diamond Cut Dome Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 6.3 mm diameter and 12.7 mm in length, the total overall length is 50 mm

25mm Carbide Burr 16mm Diameter Diamond + End Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 25 mm in length, the total overall length is 70 mm

25mm Carbide Burr 16mm Dia Diamond End Cut Cylinder 8mm sp

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 25 mm in length, the total overall length is 70 mm

25mm Carbide Burr 12.7mm Diameter Diamond +End Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 25 mm in length, total overall length is 70 mm

19mm Carbide Burr 9.5mm Diameter Diamond + End Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 9.5 mm diameter and 19 mm in length, the total overall length is 64 mm

19mm Carbide Burr 8mm Diameter Diamond + End Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 8 mm diameter and 19 mm in length, the total overall length is 64 mm

19mm Carbide Burr 12.7mm Diameter Diamond +End Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 19 mm in length, the total overall length is 64 mm

16mm Carbide Burr 6mm Diameter Diamond + End Cut Cylinder

Diamond Cut Tungsten Carbide Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The carbide burr head is 6 mm diameter and 16 mm in length, the total overall spindle length = 50 mm

HMC Carbide Burr Set 5 Piece 5 shapes for Welding Preparation

HMC Carbide Burr Set – 5 Piece (5 Shapes) for Welding Preparation SET04 – Versatile Metal Shaping & Finishing The HMC Carbide Burr Set SET04 is a high-quality, professional-grade 5-piece kit designed specifically for welding preparation, metal shaping, and finishing applications. Featuring five essential burr shapes, this set provides the versatility needed to tackle a wide range of fabrication tasks with precision and efficiency. Manufactured from durable tungsten carbide with a diamond cut profile, each burr delivers fast material removal with smooth control, making it ideal for use on steel, stainless steel, titanium, and cobalt alloys. The selection of shapes allows for effective access to tight areas, enabling users to open up cracks, clean weld roots, and refine fillet welds with ease. () Each burr is fitted with a standard 6mm shank, ensuring compatibility with most die grinders and rotary tools, while the robust construction ensures long service life even under demanding workshop conditions. Included Shapes: Bull nose (rounded cylinder) for general shaping Teardrop for contouring and access Rounded tree for curved surfaces Pointed tree for precision work in tight areas Flame shape for blending and finishing Key Features: 5-piece set with essential burr shapes for versatility Diamond cut tungsten carbide for efficient cutting performance Suitable for steel, stainless steel, titanium, and cobalt alloys Ideal for weld prep, deburring, shaping, and finishing 6mm shank compatible with standard die grinders Durable construction for long-lasting use Designed for welders and metal fabricators, the HMC SET04 Carbide Burr Set provides the flexibility and performance needed to achieve clean, precise results across a wide range of applications. Includes: Burr 1: Bull Nose burr, 9.5 mm diameter, x 19 mm length, shape CBurr 2: Teardrop shape, 9.5 mm diameter, shape EBurr 3: Rounded tree shape, 9.5 mm diameter x 19 mm length, shape FBurr 4: Pointed Tree shape burr, 12.7 mm diameter, 19 mm length, shape GBurr 5: Flame shape,12.7 mm diameter, 32mm length, shape H

25mm Carbide Burr 16mm Diameter Fluted Cut Cylinder

Long Fluted Cut: For non-ferrous metals, toughened plastic and low density fibreglass. Excellent for alloy wheel refurbishment work. The burr head is 16 mm diameter and 25 mm in length total overall length 70 mm

25mm Carbide Burr 16mm Diameter Diamond Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 25 mm in length, the total overall length is 70 mm

25mm Carbide Burr 12.7mm Diameter Fluted Cut Cylinder

Long Fluted Cut: For non-ferrous metals, toughened plastic and low density fibreglass. Excellent for alloy wheel refurbishment work. The burr head is 12.7 mm diameter and 25 mm in length total overall length 70 mm

25mm Carbide Burr 12.7mm Diameter Diamond Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 25 mm in length total overall length 70 mm

19mm Carbide Burr 9.5mm Diameter Fluted Cut Cylinder

Long Fluted Cut: For non-ferrous metals, toughened plastic and low density fibreglass. Excellent for alloy wheel refurbishment work. The burr head is 9.5 mm diameter and 19 mm in length total length 64 mm

19mm Carbide Burr 9.5mm Diameter Diamond Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 9.5 mm diameter and 19 mm in length total burr length 64 mm

19mm Carbide Burr 8mm Diameter Diamond Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 8 mm diameter and 19 mm in length overall length 64 mm

19mm Carbide Burr 12.7mm Diameter Diamond Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 19 mm in length total length 64 mm

16mm Carbide Burr 6mm Diameter Diamond Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 6 mm diameter and 16 mm in length