Right Lines Carbide Burr 5 Piece Set With 6MM Shank

Right Lines Carbide Burr 5 Piece Set    This kit provides a convenient set of different shapes of carbide burrs for use on hard metal. Ideal for any engineering workshop. This carbide burr set is for use on hard metals such as mild steel, cast iron, stainless steel and hard alloys. It would be a useful resource for any workshop or maintenance department. The contents are as below:  Ferrous (Hard) Metal Set Carbide Burr Set of 5 Shapes Shape Diameter (mm) Length (mm) Spindle (mm) Cylinder, Flat End 9.6 19.2 6 Ball End 12.5 11.4 6 Round Taper 12.5 25.4 6 Flame 8.0 19.2 6 Ball Nosed Cone 8.0 25.4 6

25mm Carbide Burr 16mm Diameter Diamond Cut Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 25 mm in length total overall length 70 mm

25mm Carbide Burr 12.7mm Diameter Diamond Cut Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 25 mm in length total overall length 70 mm

19mm Carbide Burr 9.5mm Diameter Diamond Cut Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 9.5 mm diameter and 19 mm in length total overall length 64 mm

19mm Carbide Burr 8mm Diameter Diamond Cut Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 8 mm diameter and 19 mm in length total overall length 64 mm

19mm Carbide Burr 12.7mm Diameter Diamond Cut Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 19 mm in length total overall length 64 mm

18mm Carbide Burr 6mm Diameter Diamond Cut Pointed Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 6 mm diameter and 16 mm in length total overall length 50 mm

13mm Diamond Cut Carbide Burr 6.3mm Diameter Pointed Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 6.3 mm diameter and 12.7 mm in length total overall length 50 mm