Right Lines Carbide Burr 5 Piece Set With 6MM Shank

Right Lines Carbide Burr 5 Piece Set    This kit provides a convenient set of different shapes of carbide burrs for use on hard metal. Ideal for any engineering workshop. This carbide burr set is for use on hard metals such as mild steel, cast iron, stainless steel and hard alloys. It would be a useful resource for any workshop or maintenance department. The contents are as below:  Ferrous (Hard) Metal Set Carbide Burr Set of 5 Shapes Shape Diameter (mm) Length (mm) Spindle (mm) Cylinder, Flat End 9.6 19.2 6 Ball End 12.5 11.4 6 Round Taper 12.5 25.4 6 Flame 8.0 19.2 6 Ball Nosed Cone 8.0 25.4 6

22mm Carbide Burr 12.7mm Diameter Diamond Cut Pointed Cone

Carbide Burr - Diamond Cut - Cone to pointSpindle - 6 mm, Overall length 70 mmBurr size (length 22 mm dia= 12.7 mm)

20mm Carbide Burr 9.5mm Diameter Diamond Cut Pointed Cone

Carbide Burr - Diamond Cut - Cone to pointSpindle - 6 mm, Overall length 64 mmBurr size (length 20 mm dia= 9.5 mm)

36mm Carbide Burr 16mm Diameter Diamond Cut Flame

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 36 mm total overall length 80 mm

19mm Carbide Burr 12.7mm Diameter Diamond Cut Taper

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 19 mm in length total overall length 64 mm

25mm Carbide Burr 16mm Diameter Diamond Cut Round Tree

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 25 mm in length total overall length 70 mm

25mm Carbide Burr 16mm Dia Diamond Cut Teardrop

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16mm diameter and 25mm in length, total overall length 70mm

16mm Carbide Burr 9.5mm Dia Diamond Cut Teardrop

Carbide Burr – Ball – 6mm spindle – Extra Long

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. Long Fluted Cut: For non-ferrous metals, toughened plastic and low density fibreglass Extra long carbide burr ball shape, 8 mm x 9.5 mm overall length 169 mm spindle 6 mm

25mm Carbide Burr 16mm Dia Diamond Cut Domed Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 25 mm in length, the total overall length is 70 mm

19mm Fluted Cut Carbide Burr 9.5mm Diameter Domed Cylinder

Long Fluted Cut: For non-ferrous metals, toughened plastic and low density fibreglass. Excellent for alloy wheel refurbishment work. The burr head is 9.5 mm diameter and 19 mm in length, the total overall length is 64 mm

25mm Carbide Burr 16mm Diameter Diamond + End Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 16 mm diameter and 25 mm in length, the total overall length is 70 mm

19mm Carbide Burr 9.5mm Diameter Diamond + End Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 9.5 mm diameter and 19 mm in length, the total overall length is 64 mm

14mm Carbide Burr 3mm Diameter Diamond + End Cut Cylinder

25mm Carbide Burr 12.7mm Diameter Fluted Cut Cylinder

Long Fluted Cut: For non-ferrous metals, toughened plastic and low density fibreglass. Excellent for alloy wheel refurbishment work. The burr head is 12.7 mm diameter and 25 mm in length total overall length 70 mm

25mm Carbide Burr 12.7mm Diameter Diamond Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 12.7 mm diameter and 25 mm in length total overall length 70 mm

19mm Carbide Burr 8mm Diameter Diamond Cut Cylinder

Diamond Cut Burrs: For cast iron, carbon steel, stainless steel, Ti and Co alloys, composites and high density fibreglass. The burr head is 8 mm diameter and 19 mm in length overall length 64 mm