Cibo Unitised SA5 125mm (5") Velcro Grip-Backed Finishing Disc

Cibo Unitised SA5 125mm (5") Velcro Grip-Backed Finishing Disc Unitised SA 125mm grip discs in grade 5. Velcro-backed discs which can be used in combination with velcro back up pads (SKU: 125VEL/VZ) . Use these discs for : Weld blueing removalCleaningVery fine / pre-polish finishingDeburringScratch removal.

Cibo KP950F 150MM (6") Zirconia Grit Orbital Sanding Discs

  KP950 150 mm diameter F weight zirconia paper discs and sheets with a grip backing give an excellent speed of cut and increased performance over aluminium oxide discs on hardwoods and steel when performance matters.  Ideal for fine grinding  Use for: Stainless steel and steel matt finishing and deburring and on difficult hardwoods which would ‘dull off’ aluminium oxide discs too quickly. 40Grit - Packed in 50's 60Grit - Packed in 50's 80G - 220G - Packed in 100's

Cibo CA330 Aluminium Oxide Grip Backed 150mm (6") Orbital Sanding Disc PK Of 100

Cibo CA330 Aluminium Oxide Velcro Backed Orbital Sanding Disc No Holes CA330 150 mm grip backed discs and sheets are made with a semi flexible backing and stearate coating which means that CA330 is ideal for sanding primary paint coatings and lacquers and for sanding of soft and resinous woods   Come in a pack of 100 discs 

Cibo Aluminium Oxide DA Sanding Pad With Holes Velcro Backed 5"(125mm) & 6"(150mm)

Applications:  Aluminium oxide grip discs are ideal for use on DA and rotary sanders for use on a wide range of materials including wood, paint lacquers and sealers. They are flexible and suitable for use on softer backing pads for use on shapes such as car panels.  These may be preferred for hand sanding using grip hand blocks. Specification: High quality aluminium oxide abrasive. Loop grip backing for suitable backing pads. Flexible C - weight paper. Ideal for curves. Open coat with grinding aids for cooler sanding and low clogging. Grades from 40 to 320 in stock. Finer grades available on special order. Backing pads in stock for DA and rotary sanders.

Cibo Trizact Grip Polishing Disc 5"(125mm) + 3"(75mm Inner)

Applications: These discs are made with 3M Trizact 237 synthetic abrasive laminated to a grip backing. In this form they are part of a process to rapidly blend TIG welds and improve stainless steel surfaces most of the way to a polish, in fewer stages than would be required with conventional abrasives. Trizact's uniform grain structure improves consistency on batches so that the first and last components finished have a high level of consistency.    In order to give maximum disc life, the disc centres will press-out for re-use on 75mm backing pads. Example: 115 + 75mm is a 115mm disc with 75mm press-out option. When outer edge is worn, the 75mm centre can be pressed out and re-used. Specification: Trizact 237 synthetic abrasive. Laminated to a loop grip (Velcro type) backing. For use with suitable backing pad. Inter-liner recommended for use on stainless flat. Centre press-out (choose +75mm) available for re-use (wear tends to be fastest around perimeter). Sold in packs of 10

Sia 6"(150MM) 1815 Blue Zirconia DA Sanding Disc Velcro Backed Packed In 50's

Sia 6"(150MM) 1815 Blue Zirconia DA Sanding Disc Velcro Backed Packed In 50's Price is for a box of 50 Applications – Removal of paint – Removal of rust – Weld preparation – Removing discolouration – Sanding down – Surface finishing – Deburring Materials Composite Technology siafast Product profile Grit type: Zirconia alumina  Backing: Fibre 24 – 40 f-wt paper 40 – P400 Coating: Closed Bonding: Resin over resin Special coating: Cooling top coat