Blue Demon Welding Products Blue Demon 2% Ceriated Grey Tungsten Electrodes

Blue Demon 2% Cerium Welding Tungsten (EWCe-2) These electrodes contain about 2% cerium oxide, referred to as ceria. The EWCe-2 electrodes were first introduced into the US market in 1987. Several other grades of this type of electrode are commercially practical, including electrodes containing 1% ceria, but only one grade, EWCe-2, has been incorporated in this specification as having commercial significance. The advantages of tungsten electrodes containing ceria, compared to pure tungsten, include increased ease of starting, improved arc stability, and reduced rate of vaporization or burn-off. Unlike thoria, ceria is not a radioactive material. These advantages increase with increased ceria content. These electrodes operate successfully with AC or DC polarity.

Blue Demon Welding Products Blue Demon True Flex Bendable Tungsten 10 Pack

Blue Demon True Flex Bendable Tungsten 10 Pack Blue Demon True Flex, the welding industry’s ONLY bendable tungsten at room temperature, is a great choice for applications with difficult torch angles and tight spaces.  It works well on both AC and DC current, starts easily, re-starts easily, and has excellent arc stability.  This electrode also works on both transformer and inverter power sources.  Can be identified by a light blue tip color.  To maintain proper gas coverage you may have to increase your CFH.  A bend of greater than 20 degrees is possible but not recommended. AWS Class EWG Contains 1.80-2.20% proprietary blend of one or more of the following oxides:  CeO2, La2O3, ThO2, ZrO2, & Y2O3 AWS Specification A5.12 Color Code Light Blue

Blue Demon Welding Products Blue Demon True Flex Bendable Tungsten 3 Pack

Blue Demon True Flex, the welding industry’s ONLY bendable tungsten at room temperature, is a great choice for applications with difficult torch angles and tight spaces.  It works well on both AC and DC current, starts easily, re-starts easily, and has excellent arc stability.  This electrode also works on both transformer and inverter power sources.  Can be identified by a light blue tip color.  To maintain proper gas coverage you may have to increase your CFH.  A bend of greater than 20 degrees is possible but not recommended. AWS Class EWG Contains 1.80-2.20% proprietary blend of one or more of the following oxides:  CeO2, La2O3, ThO2, ZrO2, & Y2O3 AWS Specification A5.12 Color Code Light Blue

CK Worldwide CK 2% Ceriated Grey Tungsten Electrodes Pack Of 10

CK 2% Ceriated Grey Tungsten Electrodes Pack Of 10 EWCe-2/WC20 Principal Oxide: 1.8-2.2% Cerium Oxide NON-RADIOACTIVE. Best for use in Alternative Current (A/C) or Direct Current (D/C) applications using inverter or transformer based constant current power sources. Good for low-alloyed steels, non-corroding steels, aluminium alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Good ignition and re-ignition properties, long service life, excellent arc stability. Low erosion rate, best at low amperage range, no spitting. Good D/C arc starts and stability

Blue Demon Welding Products Tungsten Electrode Storage Tube

Blue Demon Tungsten Electrode Storage Tubes– RED, GREEN, BLUE, PINK, YELLOW, GRAY, LT BLUE   Store your new or used tungsten electrodes by color that match their AWS Class: 2% Thoriated, Pure, 2% Lanthanated, Multi-Mix, 1.5% Lanthanated, 2% ceriated, and True Flex Bendable.   Each tube holds up to 10 standard pcs of tungsten 1/8” dia and smaller. Will hold approximately 5-7 pieces of 5/32”, 3/16”, and 1/4” tungsten electrodes. Made of polyethylene. Eyelet on each tube allows you to consolidate on large key ring as well.   Order with our Tec Products tungsten tube divider, click here for more information. 

CK Worldwide CK Green LAaYZR (Chartreuse) Tungsten Electrodes Pack of 10

LaYZr (CHARTREUSE) EWG Principal Oxides: 1.5% Lanthanum, 0.08% Zirconium, 0.08% Yttrium Oxides This non-radioactive tungsten is best for automated or robotic uses in AC or DC, it can tolerate a low voltage and uses inverter or transformer based constant current power sources.  These tungsten's are good for low alloyed steels, non-corroding steels and alloys of aluminium, magnesium, titanium, nickel and copper. The geometry of the tips are very stable and they run cooler than the 2% Thoriated and have a longer lifespan. Use these in the low to medium amp range.  This pack of ten is the best way always to have tungsten's on hand. 

CK Worldwide CK Blue 2% Lanthanated Tungsten Electrode Pack Of 10

CK Blue 2% LANTHANATED (BLUE) EWLa-2/WL20 Principal Oxide: 1.8-2.2% Lanthanum Oxide NON-RADIOACTIVE. Best general-purpose electrode for both Alternating Current (A/C) or Direct Current (D/C) using inverter or transformer based constant current power sources. Good for low-alloyed steels, non-corroding steels, aluminium alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Good arc starts and stability, medium to high amperage range, low erosion rate.

CK Worldwide CK 1.5% Lantanated Gold Tungsten Pack Of 10

CK Worldwide 1.5% LANTHANATED (GOLD) EWLa-1.5/WU5 Principal Oxide: 1.3-1.7% Lanthanum Oxide Lanthanated: Best for use in Direct Current (D/C) as an alternative to 2% Thoriated using inverter or transformer based constant current power sources. Best for non corroding steels, titanium alloys, nickel alloys, copper alloys. Best D/C arc starts and stability, low erosion rate, wide amperage range, no splitting.    In sizes: 0.5mmx175mm to 4.0x 175mm Comes in pack of 10. 

CK Worldwide CK 0.8% Zirconiated White Tungsten Pack Of 10

0.8% ZIRCONIATED (WHITE) EWZr-8/WZ8 Principal Oxide: 0.7-0.9% Zirconium Oxide 0.8% Zirconiated (White). Best for use in Alternating Current (A/C) for aluminium alloys and magnesium alloys using inverter or transformer based constant current power sources. Balls well, handles higher amperage than pure tungsten with less pitting, better arc starts and arc stability than pure tungsten.

CK Worldwide CK 2% Thoriated Red Tungsten Electrode Pack Of 10

CK 2% THORIATED (RED) EWTh-2/WT20 Principal Oxide: 1.7-2.2% Thorium Oxide Best for use in Direct Current (D/C) applications using transformer based constant current power sources. Best for use on non corroding steels, titanium alloys, nickel alloys, copper alloys. Good D/C arc starts and stability, medium erosion rate, medium amperage range, medium tendency to spit.