Cibo FMLA PTX Cloth Flap Wheel 100 x 100 x 19MM Keyway 120 & 180Grit

FMLA PTX Cloth Flap Wheel 100 x 100 x 19MM Keyway 120 & 180Grit  100mm diameter 120 grit FMLA wheel is good for intermediate sanding, light damage removal & graining. FMLA Coated abrasive flap brushes are designed to fit the ‘barrel sander’ tools such as the Finimaster with a 19mm keyway fitting. The abrasive cloth wheels will clean, grain and put a textured surface on stainless steel and non-ferrous metals.”100mm diameter 120 grit FMLA wheel is good for intermediate sanding

Cibo FMTA Tex PTX Wheel 180 grit flap wheel 100mm x 50mm x 19mm keyway

  Tex flap brushes remove light damage and scratches and leave a fine satin finish FMTA 180 leaves is the ideal wheel for blending a 320 grit satin finish Use with Finimaster Basic machine or other 19mm key mounted satinising machines and drum sanders. Note: The 100 x 50mm keyway brushes can also be used with variable speed grinders such as the Cibo Finipower Plus. Ideal for narrower box section and strip satin finishing

Cibo FMCAC Ceramic 60 Grit PTX Combi Brush 100 x 100mm x 19mm Keyway

FMCAC Ceramic 60 Grit PTX Combi Brush 100 x 100mm x 19mm Keyway Also called ‘The Ginger Ninja’ our new 60 grit ceramic cloth and ‘scotchbrite’ combination flap wheels have a surprisingly high durability and cut rate. Use the Combi 60 grit ceramic wheels for edge shaping surface damage removal. The Ginger Ninja will even remove light scale on stainless steel bar to create a consistent grain finish. Dependent on the final finish required a fine satin finish can be achieved if the FMCM/60 is followed by either an FMCM/80 wheel or FMTM. Use with Finimaster Basic machine or other 19mm keyway driven satin polishing machines or drum sanders. size 100 mm x 100 mm x 19 mm keyway fixing

Cibo PTX Tex Brush 100mm x 100mm x 19mm Keyway 180 Grit

Applications:  FMTA 180 leaves is the ideal wheel for blending a 320 grit satin finish Use with Finimaster Basic machine or other 19mm key mounted satinising machines and drum sanders. Specification: Made with non-woven abrasive flaps. For mounting on 19mm keywayed shafts.   Max 5,700rpm.