Cibo FMCM Combi FPTX Flap Wheel 120 x 110MM x M14 Thread

Cibo FMCM Combi FPTX Flap Wheel 120 x 110MM x M14 Thread  120mm diameter and 110mm wide the combination flap brushes remove light damage and scratches and leave a fine satin finish Recommended operating speed: 2,400 – 3,000rpmMax operating speed: 4,200rpm FMCM 80 leaves is the ideal wheel for blending a 240 grit satin finish

Cibo FMCMC Combi Ceramic Interleaved PTX Flap Wheel 120x110MM xM14 Thread

Unofficially re-named ‘The Ginger Ninja’ our new 60 grit ceramic cloth wheels have a surprisingly high durability and cut rate. Use the Combi 60 grit ceramic wheels for edge shaping surface damage removal and even light scale removal on stainless steel to create a consistent grain finish. Dependent on the final finish required a fine satin finish can be achieved if the FMCM/60 is followed by either an FMCM/80 wheel or FMTM. Use with Finimaster Pro machine or M14 driven satin polishing machines. Recommended operating speed: 2,400 – 3,000rpmMax operating speed: 4,200rpm Cibo’s Ceramic Combi Grinding Wheels: The development of the ceramic combi wheel has created the first grinding wheel that combines an aggressive ceramic linen with a soft tex. This provides a wheel that has two functions.  Press hard and you have an aggressive wheel with a high grinding capacity.  Grind with less pressure and you can easily create a fine smooth finish with this wheel. Combining these two properties allows you to grind starting with a 2B finish through to a polished finish 220 in one go.  Furthermore, grinding with this wheel generates a much lower temperature due to the ceramic linen.  This also makes it possible to machine very thin plates without risking deformation caused by the generation of excessive heat. Applications: – Brush thin (curved) plates. – Clean up surfaces to be welded. – Remove damage or machine markings and refinish in one go. – Completely remove mill scale (cold rolled) and brush to industrial finish 220 in one go. – Prepare surfaces for paints and coatings.

Cibo FMTM Tex PTX Wheel 120 x 100 x M14 Thread

Cibo FMTM Tex PTX Wheel 120 x 100 x M14 Thread Tex nonwoven flap brushes remove light damage and scratches and leave a fine satin finish FMTM 180 leaves is the ideal wheel for blending a 320 grit satin finish Use with Finimaster Pro satin polishing machine Recommended operating speed: 2,400 – 3,000rpmMax operating speed: 4,200rpm

Cibo Surface Conditioning Material PTX Sleeve 280MM x 100MM (Pk OF 10)

Applications:  Surface conditioning belts are designed to give a consistent, smooth and burr free finish on stainless steel, aluminium and non-ferrous metals. For use on an inflatable wheel on machines such as FiniMaster or Poly PTX. Specification: Made with non-woven abrasive fleece. Needled to a low-stretch backing. Contains cooling agent. Check size. Length (circumference) is usually longer than coated abrasive sleeves due to thickness. Chose grades: Coarse (CO): For DP1 finish. Brushed finish. Medium (ME): 240-320 equivalent. V Fine (VF): Approx 400 finish.Satin finish.

Cibo Combination Flap PTX Brush Wheel With 19mm Keyway (FMCA) 60,80,180Grit

Applications:  Combination flap wheels have alternate flaps of coated and non-woven abrasive. The coated abrasive flaps give a little extra aggression to remove scratches, blemishes and even light coatings. They will re-grain leaving a brushed or satin finish, depending on the chosen grade. These wheels fit any metal burnisher machine with a 19mm keywayed shaft, such as Finimaster Basic, PTX, EDX, Fein and similar machines. The grade 60 ceramic wheel has much greater cutting ability and can remove mill-scale and harder coatings. Specification: Combination of non-woven and coated abrasive flaps. Aluminium oxide (standard) or grade 60 ceramic abrasive. Suits 19mm keyway shaft. Choice of 50mm or 100mm widths. Max 5,700rpm. (Use lower speeds for fine finishes.)

Cibo Felt Polishing Wheel For PTX Machine 100x50x19MM

Applications:  For polishing metal and other smooth surfaces using suitable hand-held polishers and satinisers. Items with 19mm keywayed holes fit FiniMaster Basic, PTX, EDX and similar 100mm metal polishing machines. Use felt and flannel to achieve fine finishes including mirror polishing stainless steel, in conjunction with a suitable polishing compound such as PV102 (pink).  Specification: Cotton-rich felt or flannel. For use with suitable polishing compounds. Speed ratings, 100mm Dia: 5,700rpm.

Cibo PTX Tex Brush 100mm x 100mm x 19mm Keyway 180 Grit

Applications:  FMTA 180 leaves is the ideal wheel for blending a 320 grit satin finish Use with Finimaster Basic machine or other 19mm key mounted satinising machines and drum sanders. Specification: Made with non-woven abrasive flaps. For mounting on 19mm keywayed shafts.   Max 5,700rpm.