Weld Star HF600 Solid Hard Facing MIG Wire 15kg 300MM Metal Reel

Features and Applications Copper coated high alloy solid wire for hardfacing and overlay of all C-Mn steels. This alloy deposits a martensitic structured weld metal with a hardness of about 54-60 HRC. Excellent abrasion resistance to moderate impact and high toughness. The weld metal has a Cr-Si structure and if not tempered can only be machined by grinding. Mostly used with semiautomatic and automatic procedures. A buffer layer is essential with hard to weld steels. Precision layer wound for superior wire feeding characteristics. Typically used on excavators in the mining industry, cylinder crushers, pneumatic hammers, knives, cutting and cold working tools, crumbling jaws, anvils, caterpillars, screws, guide rollers, etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials X45CrSi9-3, 4Xr9Si2, X45CrSi8, HNV1, HNV2, SUH11, X45CrSi 9-3, 401 S45, SUH 1, STR 1, 40Ch9S2** Illustrative, not exhaustive list   Standards EN ISO 14700 - S Fe 8 DIN 8555 - MSG 6-GZ-60-GP   Chemical Composition % (Typical) C% Mn% Si% S%       0.46 <0.60 3.05 <0.030                     Cu% P% Ni% Cr%       <0.25 <0.040 <0.50 9.10         Mechanical Properties Hardness (HRC) - 54 - 60 Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.