BÖHLER UTP AF Robotic 600 1.2mm Hardfacing Mig Wire 16kg

Bohler UTP AF ROBOTIC 600 is an example of an innovative, tailor-made product – developed to optimally fulfill requirements in the waste & recycling industry. It is a seamless, copper-coated, gas-shielded cored wire for the hardfacing of components subjected to extreme combinations of pressure, impact and abrasion wear, such as shredders. The wire can be used in all welding positions and has excellent characteristics for the robotic welding of new equipment, for example onto shredder teeth. It performs equally well in semi-automatic GMAW used for on-site-repair of worn components. When overlay welding onto S355 base material, a crack-free deposit with hardness of 55 HRC is already obtained in the first layer, increasing to a level of 57-62 HRC with the following layers. As such, the full weld overlay thickness will contribute to the wear resistance leading to a higher service life of the repaired components until next maintenance becomes necessary. With a record of hundreds of successful applications, UTP AF ROBOTIC 600 has proven to meet the growing demand within the recycling industry for efficient maintenance solutions to protect machinery against wear and prolong the life of shredder components. UTP AF ROBOTIC 600 Premium seamless gas-shielded cored wire for the hardfacing of shredders   Product Features:   Seamless copper-coated cored wire Excellent, smooth wire feeding Reduced contact tip wear Resistant to moisture and rust formation Controlled wire cast & helix Limited “dog tailing” at contact tip, promoting well positioned beads Wider window of applicable welding parameters than solid wire Significantly higher deposition rates and Welding productivity Easy setting of parameters Allows calm, spatter-free spray arc welding Weldable in all welding positions One wire for all hardfacing jobs, regardless position Available in drums with high filling content Less downtime for spool exchange Total product performance from above features Dependable and productive welding consumable for automated / robotic welding

Weld Star HF600 Solid Hard Facing MIG Wire 15kg 300MM Metal Reel

Features and Applications Copper coated high alloy solid wire for hardfacing and overlay of all C-Mn steels. This alloy deposits a martensitic structured weld metal with a hardness of about 54-60 HRC. Excellent abrasion resistance to moderate impact and high toughness. The weld metal has a Cr-Si structure and if not tempered can only be machined by grinding. Mostly used with semiautomatic and automatic procedures. A buffer layer is essential with hard to weld steels. Precision layer wound for superior wire feeding characteristics. Typically used on excavators in the mining industry, cylinder crushers, pneumatic hammers, knives, cutting and cold working tools, crumbling jaws, anvils, caterpillars, screws, guide rollers, etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials X45CrSi9-3, 4Xr9Si2, X45CrSi8, HNV1, HNV2, SUH11, X45CrSi 9-3, 401 S45, SUH 1, STR 1, 40Ch9S2** Illustrative, not exhaustive list   Standards EN ISO 14700 - S Fe 8 DIN 8555 - MSG 6-GZ-60-GP   Chemical Composition % (Typical) C% Mn% Si% S%       0.46 <0.60 3.05 <0.030                     Cu% P% Ni% Cr%       <0.25 <0.040 <0.50 9.10         Mechanical Properties Hardness (HRC) - 54 - 60 Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.