Weld Star Weldstar ER316L Stainless Steel MIG Wire 5KG 200MM Reel

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. The presence of molybdenum provides creep resistance in a halide atmosphere. ER 316LSi is slightly magnetic and offers good corrosion resistance. Ideal for welding low-carbon molybdenum-bearing austenitic alloys, including joining and surfacing of stainless steels type 316, 316L and 316Ti. High temperature resistance up to 400°C. Precision layer wound for superior wire feeding characteristics. Typically used on applications where good corrosion resistance is required, such as in acid media a/o in chlorinated solutions, hot water tanks, architectural and roofing, food processing and chemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials All 300 series austenitic stainless steel, particularly 316 and 316L* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 19 12 3 L Si AWS A5.9 - ER 316LSi  

Weld Star ER2594 Super Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic wire for welding all grades of super duplex stainless steels. Provides matching chemistry and mechanical property characteristics to wrought super duplex alloys such as 2507 and Zeron 100. Excellent resistance to aggressive environments as well as to pitting and crevice corrosion in warm seawater applications. The presence of Cu and W provides superior resistance to sulphuric and hydrochloric acids when compared to similar alloys without these additions. Improved resistance over austenitic stainless to erosion corrosion and fatigue. Precision layer wound for superior wire feeding characteristics. Typically used in the oil and gas industries, seawater systems, petrochemical and pharmaceutical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32530, S32550, S32750, S32760, 1.4501** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G Z 25 9 4 N L W AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P% Ni%    <0.03 <1.00 <1.00 <0.020 <0.035 9.28                 Cr% Mo% Cu% N% W%     25.12 3.60 0.59 0.22 0.62       Mechanical Properties Tensile Strength ≥750 MPa   Yield Strength ≥550 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER2209 Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Precision layer wound for superior wire feeding characteristics. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF     Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.