Weld Star ER2594 Super Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic wire for welding all grades of super duplex stainless steels. Provides matching chemistry and mechanical property characteristics to wrought super duplex alloys such as 2507 and Zeron 100. Excellent resistance to aggressive environments as well as to pitting and crevice corrosion in warm seawater applications. The presence of Cu and W provides superior resistance to sulphuric and hydrochloric acids when compared to similar alloys without these additions. Improved resistance over austenitic stainless to erosion corrosion and fatigue. Precision layer wound for superior wire feeding characteristics. Typically used in the oil and gas industries, seawater systems, petrochemical and pharmaceutical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32530, S32550, S32750, S32760, 1.4501** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G Z 25 9 4 N L W AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P% Ni%    <0.03 <1.00 <1.00 <0.020 <0.035 9.28                 Cr% Mo% Cu% N% W%     25.12 3.60 0.59 0.22 0.62       Mechanical Properties Tensile Strength ≥750 MPa   Yield Strength ≥550 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER2209 Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Precision layer wound for superior wire feeding characteristics. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF     Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER347Si Stainless Steel MIG Wire 15KG

Stainless Steel Grade ER347Si: ER347Si is a type of stainless steel MIG wire that is specifically designed for welding and joining stainless steel components. It belongs to the austenitic family of stainless steels and offers excellent corrosion resistance, high strength, and good formability. MIG Welding: ER347Si wire is used in the MIG (Metal Inert Gas) welding process, also known as Gas Metal Arc Welding (GMAW). MIG welding utilizes a consumable wire electrode and an inert gas, such as argon or a mixture of argon and carbon dioxide, to shield the weld pool from atmospheric contamination. ER347Si MIG Wire: ER347Si MIG wire is formulated with a specific composition suitable for welding stainless steel grade 347 or similar materials. The "ER" prefix indicates that it is an electrode or rod used for welding, and the "Si" signifies the addition of silicon in its composition. Low Carbon Content: ER347Si MIG wire contains a low carbon content to minimize the risk of carbide precipitation and intergranular corrosion during welding. This makes it well-suited for applications where the welded joints will be exposed to corrosive environments. Silicon Addition: The inclusion of silicon in ER347Si wire improves the fluidity of the weld pool, facilitating good wetting and penetration during welding. It also contributes to stable arc characteristics and reduced spatter. Welding Applications: ER347Si MIG wire is commonly used for welding stainless steel components in various industries, including petrochemical, power generation, food processing, and automotive. It is suitable for joining stainless steel pipes, tanks, and equipment exposed to high temperatures and corrosive environments. Compatibility: ER347Si MIG wire is typically used with stainless steel grade 347 base metal or similar stabilized austenitic stainless steels. Grade 347 stainless steel offers improved resistance to intergranular corrosion and sensitization due to the addition of niobium (columbium). Shielding Gas: When using ER347Si MIG wire, a shielding gas containing argon or a mixture of argon and carbon dioxide is commonly used to protect the weld from oxidation and atmospheric contamination. Remember to follow the manufacturer's recommendations and welding procedures to ensure proper welding results and performance when using ER347Si stainless steel MIG wire.

Weld Star ER316Lsi Stainless Steel MIG Wire 15KG

Weld Star ER316Lsi Stainless Steel MIG Wire 15KG   Features & Benefits Stainless Steel Grade 316LSi: Grade 316LSi is a low-carbon variation of stainless steel grade 316. It is an austenitic stainless steel, which means it is non-magnetic and offers excellent corrosion resistance, high strength, and good formability. MIG Welding: MIG (Metal Inert Gas) welding, also known as Gas Metal Arc Welding (GMAW), is a popular welding process that uses a consumable wire electrode and an inert gas, typically argon or argon mixtures, to shield the weld pool from atmospheric contamination. 316LSi MIG Wire: 316LSi MIG wire is specifically designed for MIG welding applications that involve stainless steel grade 316 or similar materials. The "LSi" in its name stands for "low carbon, silicon added," indicating its composition and improved weldability. Low Carbon Content: The low carbon content in 316LSi MIG wire helps to minimize carbide precipitation during welding, which can lead to intergranular corrosion. This makes it suitable for applications where post-welding exposure to corrosive environments is a concern. Silicon Addition: The addition of silicon to the wire enhances the fluidity of the weld pool and promotes good wetting and penetration characteristics. It also contributes to improved arc stability and reduced spatter during welding. Welding Applications: Grade 316LSi MIG wire is commonly used for welding stainless steel components in various industries, including chemical processing, food and beverage, pharmaceuticals, marine applications, and architectural structures. It is suitable for joining stainless steel plates, sheets, pipes, and fittings. Compatibility: 316LSi MIG wire is typically used with the same grade of base metal, such as 316 stainless steel or similar austenitic stainless steels. It provides good corrosion resistance in a wide range of environments, including those with exposure to acids, chlorides, and marine conditions. Shielding Gas: When using 316LSi MIG wire, a shielding gas containing argon or a mixture of argon and carbon dioxide is commonly used to protect the weld from oxidation and atmospheric contamination. It's important to follow the manufacturer's guidelines and welding procedures when using stainless steel MIG wire grade 316LSi to ensure proper weld quality and performance.

Weld Star ER307Si Stainless Steel MIG Wire 15KG Reel

Features and Applications Austenitic stainless steel wire with a significant amount of manganese, making the all weld metal in most cases fully austenitic. High mechanical strength and excellent crack resistance. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for dissimilar welding between steel and stainless steel, armour plate and exhaust systems etc. Suitable for depositing stress relaxing buffer layers on crack sensitive base metals including hardfacing. Precision layer wound for superior wire feeding characteristics. Typically used on applications subject to atmospheric and corrosive media’s. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Armour plate, exhaust systems (type 409, 304), high Manganese austenitic steel, difficult to weld steels such as 42CrMo4, C45, 42MnV7, tool steels, 1.3401, X120Mn12 etc.* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 18 8 Mn AWS A5.9 - ER 307Si   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.045 6.06 0.82 0.005 0.029                   Ni% Cr% Mo% Cu%       8.02 18.35 0.05 0.030         Mechanical Properties Tensile Strength ≥500 MPa   Yield Strength ≥350 MPa   Elongation ≥25 %   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters - M12 Ømm Current (A) Voltage (V) 0.80 mm 40-120 15-20 1.00 mm 80-160 16-22 1.20 mm 100-210 17-23   Welding Parameters - M13 Ømm Current (A) Voltage (V) 0.80 mm 160-210 24-28 1.00 mm 180-280 25-30 1.20 mm 200-300 26-32   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

BÖHLER Bohler 1.0MM Thermanit 2209 (ER2209) Duplex Stainless MIG Wire 15KG

Characteristics and typical fields of application Thermanit 2209 is primarily designed for welding the duplex grade 2205 and similar but it can also be used for SAF 2304 type of steels. Thermanit 2209 provides a ferritic-austenitic weldment that combines many of the good properties of both ferritic and austenitic stainless steels. The welding can be performed using short, spray or pulsed arc. Welding using pulsed arc provides good results in both horizontal and vertical-up positions. Structure: Austenite with 45 – 55 % ferrite. Scaling temperature: Approx. 850 °C (air). Corrosion resistance: Very good resistance to pitting and stress corrosion cracking in chloride containing environments.

BÖHLER Bohler Thermanit GE316L Stainless Steel MIG Wire 15KG 300MM Metal Reel

Bohler Thermanit GE316L Stainless Steel MIG Wire 15KG 300MM Metal Reel Böhler Thermanit GE316L is a premium-quality stainless steel solid MIG welding wire developed for welding and surfacing austenitic stainless steels such as 316, 316L and similar CrNiMo stainless steel grades. Manufactured to the highest standards by Böhler Welding, this low-carbon ER316LSi wire provides outstanding corrosion resistance, excellent weldability, and a smooth, stable arc for high-quality welds in demanding industrial applications. Featuring an increased silicon content (Si), Thermanit GE316L offers excellent wetting characteristics, reduced spatter, and a superior weld bead appearance, making it ideal for food processing equipment, pharmaceutical installations, chemical processing plant, marine fabrication, and architectural stainless steel applications. The low carbon composition helps minimise the risk of intergranular corrosion after welding, while maintaining excellent mechanical properties and resistance to temperatures up to 400°C. Supplied on a 15kg, 300mm metal reel, this wire is suitable for use with standard MIG/MAG welding equipment and is available in a range of wire diameters to suit a variety of fabrication requirements. Key Features: Premium Böhler Thermanit GE316L stainless steel MIG wire Low carbon ER316LSi composition for improved corrosion resistance Excellent arc stability with low spatter levels Increased silicon content for superior weld bead appearance Ideal for welding 316, 316L and similar CrNiMo stainless steels Suitable for joining and surfacing applications Excellent resistance to intergranular corrosion Maximum service temperature up to 400°C Supplied on a 15kg 300mm metal reel Manufactured to stringent Böhler Welding quality standards Specifications: Product: Böhler Thermanit GE316L Stainless Steel MIG Wire Wire Classification: ER316LSi Reel Weight: 15kg Reel Size: 300mm Metal Reel (D300) Wire Type: Solid Stainless Steel MIG Wire Applications: Food Processing, Chemical Plant, Marine, Pharmaceutical, Architectural Stainless Steel, Pressure Vessels and General Stainless Steel Fabrication Suitable Materials: 316, 316L and similar austenitic stainless steels Maximum Service Temperature: 400°C Characteristics and typical fields of application Solid wire of G 19 12 3 L Si / ER316LSi type for joining and surfacing application with matching and similar non-stabilized austenitic CrNi(N) and CrNiMo(N)-steels and cast steel grades. Corrosion resistance similar to matching low-carbon and stabilized austenitic 17Cr-12Ni-2Mo-steels and cast steel grades. The wire shows very good wetting and feeding characteristics, with excellent weld metal toughness down to –320°F. Application temperature max. 750°F. Classifications EN ISO 14343-A - G 19 12 3 L Si EN ISO 14343-B - SS316LSi AWS A5.9 -  ER316Si / ER316LSi   Available In:  0.8MM 1.0MM 1.2MM   15KG Metal Reels