EWM Picotig 220 Puls DC 5P TIG Welder Power Source Only

EWM Picotig 220 Puls DC 5P Power Source Only  TIG DC inverter welding machine, portable, gas-cooled, 5-pole, with PFC module High-efficiency current draw thanks to integrated PFC (Power Factor Correction) technology TIG DC and TIG pulse Non-latched/latched operation spotmatic and spotArc® MMA, MMA pulse, MMA cel, MMA cel pulse Robust housing with impact-resistant plastic cover 5-pole, digital welding torch connection with X technology allows users to connect Retox XQ welding torches Comfort 3.0 mini control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters Splash-proof in line with IP23 Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed Generator-compatible, even with long mains leads High mains voltage tolerance Consumables box in the handle – consumables always safely stored and within reach Cable holder for holding mains cable as standard Protective cap provided as standard protects the control against water, dirt and impact Adjustable hot start current and hot start time Adjustable Arcforce Antistick function Energy-saving thanks to high efficiency and standby function 3.5 m mains supply lead with 16 A shock-proof plug Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

EWM Tetrix XQ 230 Puls AC/DC TIG 5P With Expert 3.0 Control Panel Package Builder

EWM Tetrix XQ 230 Puls AC/DC TIG 5P With Expert 3.0 Control Panel Package Builder This highly efficient TIG welder has standby functionality and is the latest generation EWM TIG AC/DC inverter machine, it features TIG AC, TIG DC and TIG pulse, MMA welding, MMA pulse welding, MMA Cel and MMA Cel Pulse. This is a modular machine which is capable of TIG AC/DC and TIG pulse, MMA welding and MMA Cel Pulse. It also has ActivArc and Spotarc technology.  Use the package uilder to spec your machine to your exact requirements   TIG Welding: Temperature and speed controlled fan for cooling which reduces contamination and noise emissions because the fan only is on when required. Remote control and function torch connection compatibility. Simple and tool free welding polarity reversal. IP23 splash proof standards. Robust case. Why we love the Tetrix XQ230 Puls AC/DC: Flexfit case system allows accessories and parts to be added using standard slot nuts. Expert 3.0 control with 7 inch screen- easy to see and use. LED information bar to show current status.  Optional connection to network through Wifi or LAN. High capacity cooling system using the 1500 W high performance centrifugal pump with 8 litre coolant tank- this saves money on consumable costs.  High mains voltage tolerance. Generator compatible. Consumables box in the handle. Description: Modular AC/DC TIG inverter welding machine of the latest generation TIG AC/DC, TIG DC and TIG pulse activArc® and spotArc® MMA, MMA pulse, MMA cel, MMA cel pulse Machine configuration ex works: Tetrix XQ 230 puls AC/DC with Comfort 3.0 DC machine control, 3.5 m mains cable including mains plug and 5-pole connection socket compatible with EWM X technology Tried-and-tested Comfort 3.0 control with two easy-to-read 7-segment displays for simple and fast selection of the most important parameters Robust housing with impact-resistant plastic cover Provided ex works ready for water block connection – guarantees ultimate flexibility in industry and trade Splash-proof in line with IP23 Temperature- and speed-controlled cooling fan – reduced contamination and less noise emissions as fan only runs when needed Generator-compatible, even with long mains leads High mains voltage tolerance Consumables box in the handle – consumables always safely stored and within reach LED status bar indicates the current operating status with colours Optional network connectivity with ewm Xnet software via LAN or WiFi gateway 3.5 m mains lead with 16 A earthed plug Controls: Popular, praised and simply indispensable 7" Digital Screen  Five favourites buttons Click wheel for convenient use with welder’s gloves Reliable push-button operation Direct access to all main functions All parameters at a glance AC and DC versions available   Welding process DC TIG   TIG AC   MMA DC   MMA AC   E-Hand cel Operating modes Non-latched 2T   Latched 4T   spotArc   spotmatic AC functions AC tungsten balling   AC sine   AC trapezoidal   AC rectangle   AC balance   AC amplitude balance   AC frequency: 30 Hz to 300 Hz   Automatic AC frequency   AC commutation optimisation for highest arc stability Ignition options HF   Liftarc Pulse type Average value pulsing (0.2 Hz–20 kHz) incl. waveform setting (soft, middle, hard)   Thermal pulsing (time pulsing)   AC special MMA functions Hotstart   Arcforce   Antistick   Average value pulse welding Functions activArc   Automatic gas post-flow function   Cable resistance alignment Job functions Number of freely definable Jobs 100 TIG, 8 MMA, 8 MMA Cel

Parweld XTM211DI-P2 Multi Process Welder Package

Parweld XTM 211Di P2 MIG, DC TIG or MMA machine; The Parweld XTM211Di MIG, AC/DC TIG or MMA welder is a multipurpose machine ideal for welding steel, stainless steel or aluminium. This machine is capable of 3 different processes- MIG, DC TIG and MMA welding. This lightweight machine is compact and is housed in a metal housing with added carry handle, the total weight of the machine is 27.5kg. The torch can be remote controlled, this allows for parameters to be changed and process adjusted quickly and easily. The Parweld XTM211i has a dual voltage of 110 and 240V, this means that the device is ideal for use with generators or on-site. The LED digital display is large and provides a high-quality resolution, it is simple and easy to use but allows for full control when required. The option of full synergic control allows for rookie welders to gain experience but also maintains full customisation of parameters for professionals. A 15kg reel capacity means that the Parweld XTM211i is ideal for heavy industrial work as minimal reel changes are required. Additional features not usually found on other similar multi-process welding machines increase the usability of this product, the AC and DC TIG welding functions plus the high frequency welding functions ensure that this product is worth the money. The ability to weld aluminium, mild steel and stainless steel means this machine stands out from the crowd with it’s lift TIG arc ignition function. High frequency ignition ensures less inclusions at the start of the weld run and a nicer arc start. The adjustable pulse frequency makes welds look better and use less heat, this prevents distortion of materials. Thick materials can be welded with ease using the 200A output allowing materials up to 15mm thick using a 4mm rod. This machine also has automatic polarity switching. In summary, this multi-process machine is a 4 in 1 welder which is easy to use for professionals and amateurs alike. It allows for full control of all parameters through both the torch remote control and LED digital display.   *This package comes with MIG, TIG and Stick lead, if you are looking for MIG only package click here.    Parweld XTM 211Di P2 Package Comes Ready To Weld With: XTM 211 Multi-Process Machine Earth lead 2 x gas hoses 1 x regulator 1 x set of 0.8/1.0mm rollers  MIG Torch  TIG Torch  Stick lead   Key Features Compact & Portable The XTM 211Di is an ideal welder for site work due to its compact and portable size.   Two Roll Wire Feeder The built-in two-roll wire feeder allows for a smooth, strong input wire feed into the welding gun.   2T/4T Control Functions The 2T/4T trigger latching function makes this the ideal welder for long welding jobs. Switching on the 4T functionality means that the torch trigger is switched on without you having to hold the torch down. This reduces ‘finger fatigue’ when welding and allows for smoother continuous welds.   Smart Switching The XTM 211Di comes with built-in smart switching functionality. The machine can automatically switch between 110V and 230V, making it very efficient.     Parweld XTM 211Di Features: 110V / 230V dual voltage Multi-process MIG/TIG/MMA Quick and easy selection of welding process, control type, material and wire size Synergic control 2T/4T trigger latching Real-time display of parameters and data on high quality digital display Pulse TIG functionality for superior arc control Rapid set up using synergic control Memory functionality for all processes to save and recall programs Supplied with MIG torch, TIG torch and Earth lead MIG weld materials from 0.9mm to 15mm Welds steel, stainless steel or aluminium