Weld Star Weldstar Mild Steel MIG Wire SG2(G3Si1) ER70S-6 1KG Reel

Weldstar Mild Steel MIG Wire SG2(G3Si1) ER70S-6 1KG Reel Features and Applications A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Good mechanical properties at sub-zero temperatures down to -40ºC. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 <0.35             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 0.60 mm 50-100 15-20 0.80 mm 60-200 18-24 1.00 mm 80-300 18-28    Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Box Qty 0.60 mm 0.80 mm 1.00 mm 1 Kg 1 Kg 1 Kg D100 D100 D100 20 20 20 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star Weldstar SG3 G4Si1 Mild Steel MIG Wire 250KG Endurance Pac

Features and Applications Bulk wire drum system that offers a high productivity solution for continuous high volume welding applications. A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. The higher Si-Mn content increases the weld metal strength and leaves a good bead appearance. Designed for semi-automatic and full-automatic GMAW applications. Good mechanical properties at sub-zero temperatures down to -40ºC. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 46 4 M21 4Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.95 1.70 <0.020 <0.020 <.025             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.050 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 570 MPa 590 MPa Yield Strength 460 MPa 490 MPa Elongation 30% 28% Impact Strength 58 J 88 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star SG3 G4Si1 MIG Wire 15KG - 300MM Plastic Reel

Features and Applications A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. The higher Si-Mn content increases the weld metal strength and leaves a good bead appearance. Designed for semi-automatic and full-automatic GMAW applications. Good mechanical properties at sub-zero temperatures down to -40ºC. Vacuum-sealed aluminium foil packaging to prevent moisture absorption. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 46 4 M21 4Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.95 1.70 <0.020 <0.020 <.025             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.050 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 570 MPa 590 MPa Yield Strength 460 MPa 490 MPa Elongation 30% 28% Impact Strength 58 J 88 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg D300 D300 D300 72 72 72

Weld Star Copper Free (CF2) Mild Steel SG2 (G3Si1) MIG Wire 15/18KG

Features and Applications A non-copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Environmentally friendly when compared against traditional copper wires offering less fume and smoke in the working environment. Advantages of a stable arc when working with increased welding speeds that achieves high quality welds with almost no spatter. Good mechanical properties at sub-zero temperatures down to -40ºC. Vacuum-sealed plastic bag packaging to prevent moisture absorption. Fitted with alignment hole clip to ensure smooth feeding. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 0.010             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 18 Kg 18 Kg BS300 BS300 BS300 72 56 56 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance

Weld Star Weldstar ER80S-G Corten MIG Wire 15KG 300MM Reel

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Precision layer wound for superior wire feeding characteristics. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.         

Weld Star Mild Steel SG2 G3Si1 MIG Wire 250kg Marathon Bulk Pack

Features and Applications Bulk wire drum system that offers a high productivity solution for continuous high volume welding applications. A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Good mechanical properties at sub-zero temperatures down to -40ºC. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 <0.35             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG