Weld Star Weldstar ER2594 Super Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by a PREN (Pitting Resistance Equivalent Number) at least 40, thereby allowing the weld metal to be called “super duplex stainless steel”. Provides excellent resistance to intergranular corrosion, pitting and stress corrosion cracking in chloride environments. Over-alloyed with nickel compared to the base material to ensure the optimum combination of microstructure, mechanical properties and corrosion resistance. This alloy is widely used in applications in which corrosion resistance is of the utmost importance. Typically used in the petrochemical and offshores industries, pulp and paper and in the production of pollution control equipment. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32750, S32760, J93380, J93404, S32550, J93370, J93372** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 25 9 4 N L AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 <2.00 <1.00 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     9.33 25.10 3.97 <1.50 0.24       Mechanical Properties Tensile Strength ≥620 MPa   Yield Strength ≥550 MPa   Elongation ≥18 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER2209 Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER410 Stainless Steel TIG Filler Wire 5KG

Weldstar ER410 Stainless Steel TIG Filler Wire 5KG Features and Applications Stainless steel wire designed to weld stainless steels of similar composition, including deposition of overlays on carbon steels to resist corrosion, erosion and abrasion. ER 410 contains sufficient carbon to enable air-hardening transformation of the weld metal to a predominately martensitic microstructure. Preheat and postweld heat treatments are required to achieve welds of adequate ductility for many  engineering purposes. Ideal for welding or repairing 12% Cr air-hardenable stainless steels like types 410, 416, 420, 431 and cast C-15. Typically used on applications for heat furnaces and turbine part production etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Wrought or cast martensitic, types 403, 405, 410, and 416 stainless steel* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 13 AWS A5.9 - ER 410   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.015 0.55 0.48 0.004 0.028                   Ni% Cr% Mo% Cu%       0.37 12.90 0.08 0.15         Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥250 MPa   Elongation ≥15 %

Weld Star Weldstar ER385 Stainless steel TIG Filler Wire 5KG

Features and Applications Super austenitic stainless steel wire characterised by its high resistance to stress corrosion cracking. High Ni content in conjunction with the addition of Cu also results in excellent resistance in sulphuric solutions. Ideal for environments subject to pitting and crevice corrosion attacks. The microstructure is fully austenitic and is less sensitive to ferrite and sigma phase precipitation than conventional grades with high molybdenum contents. Typically used in the phosphoric acid and chemical fertiliser industries, hydrometallurgy, paper industry and applications subject to seawater etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS N08904, ASTM B625, B673, B674, B677** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 20 25 5 Cu L AWS A5.9 - ER 385   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.025 1.72 <0.50 <0.020 <0.020                   Ni% Cr% Mo% Cu%       24.87 19.79 4.24 1.36         Mechanical Properties Tensile Strength ≥510 MPa   Yield Strength ≥320 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER307Si Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire with a significant amount of manganese, making the all weld metal in most cases fully austenitic. High mechanical strength and excellent crack resistance. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for dissimilar welding between steel and stainless steel, armour plate and exhaust systems etc. Suitable for depositing stress relaxing buffer layers on crack sensitive base metals including hardfacing. Typically used on applications subject to atmospheric and corrosive media’s. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Armour plate, exhaust systems (type 409, 304), high Manganese austenitic steel, difficult to weld steels such as 42CrMo4, C45, 42MnV7, tool steels, 1.3401, X120Mn12 etc.* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 18 8 Mn AWS A5.9 - ER 307Si   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.045 6.06 0.82 0.005 0.029                   Ni% Cr% Mo% Cu%       8.02 18.35 0.05 0.030         Mechanical Properties Tensile Strength ≥500 MPa   Yield Strength ≥350 MPa   Elongation ≥25 %   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF