ESAB Exaton 25.10.4.L Super Duplex TIG Filler Wire 2.4MM - 5KG

Exaton 25.10.4.L Super Duplex TIG Filler Wire 2.4MM - 5KG Exaton 25.10.4.L is designed for gas shielded arc welding of superduplex stainless steels, such as UNS S32750 (e.g. SAF™ 2507), UNS S32760 and UNS S31803 / S32205 (e.g. SAF™ 2205). It combines high strength with excellent ductility. Exaton 25.10.4.L can also be used for joining UNS S32750 and S32760 to carbon steel or low-alloy steels. Exaton 25.10.4.L can also be used for welding duplex stainless steels when the highest possible corrosion resistance is required. The grade is characterized by excellent resistance to stress corrosion cracking in chloride-bearing environments and excellent resistance to pitting and crevice corrosion. Its corrosion resistance is equal to UNS S31254 (e.g. Alleima® 254SMO™) in most applications.

Weld Star Weldstar ER2594 Super Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by a PREN (Pitting Resistance Equivalent Number) at least 40, thereby allowing the weld metal to be called “super duplex stainless steel”. Provides excellent resistance to intergranular corrosion, pitting and stress corrosion cracking in chloride environments. Over-alloyed with nickel compared to the base material to ensure the optimum combination of microstructure, mechanical properties and corrosion resistance. This alloy is widely used in applications in which corrosion resistance is of the utmost importance. Typically used in the petrochemical and offshores industries, pulp and paper and in the production of pollution control equipment. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32750, S32760, J93380, J93404, S32550, J93370, J93372** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 25 9 4 N L AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 <2.00 <1.00 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     9.33 25.10 3.97 <1.50 0.24       Mechanical Properties Tensile Strength ≥620 MPa   Yield Strength ≥550 MPa   Elongation ≥18 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

BÖHLER Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG

Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG Bohler Thermanit GE-316L stainless steel tig wire is ideal for joining and surface applications with matching and similar, non-stabilized and stabilized, austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Classifications EN ISO 14343-A EN ISO 14343-B AWS A5.9 (Mat. No.) G 19 12 3 L Si SS316LSi ER316LSi (1.4430) Characteristics and typical fields of application Austenitic stainless steel wire electrode, resistant to inter-crystalline corrosion, wet corrosion resistant up to 400 °C (752 °F). Heat resistant and nonscaling up tp 800 °C (1472 °F). Corrosion-resistance similar to matching low-carbon and stabilized austenitic 17/12/2-CrNiMo steels / cast steel grades. For joining and surfacing application with matching and similar – non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Low temperature service down to –196 °C (-320 °F). Base materials TÜV-certified parent metal 1.4401 – X5CrNiMo17-12-2; 1.4404 – X2CrNiMo17-12-2; 1.4435 – X2CrNiMo18-14-3; 1.4436 – X3CrNiMo17-13-3; 1.4571 – X6CrNiMoTi17-12-2; 1.4580 – X6CrNiMoNb17-12-2; 1.4583 – X10CrNiMoNb18-12; 1.4409 – GX2CrNiMo19-11-2; UNS S31603, S31653; AISI 316L, 316Ti, 316Cb Typical analysis of solid wire (wt.-%) C Si Mn Cr Mo Ni wt-% 0.02 0.8 1.7 18.8 2.8 12.5 Structure: Austenite with part ferrite Mechanical properties of all-weld metal Heattreatment Yield strength Rp0.2 Yield strength Rp1.0 Tensile strength Rm Elongation A (L0=5d0) Impact work ISO-V CVN J MPa MPa MPa % +20 °C –196 °C aw 380 420 (≥ 320) 560 (≥ 510) 35 (≥ 25) 70 ≥ 32 Operating data Polarity: DC ( + ) Shielding gas: (EN ISO 14175) M12, M13 ø mm 0.8 1.0 1.2 Spool: BS300 B300 Drum Welding instruction Materials Preheating Postweld heat treatment Matching and similar non-stabilized and stabilized steels / cast steel grades None Mostly none. If necessary, solution annealing at 1050°C (1922°F) – pay attention to tendency to embrittlement Approvals TÜV (00489), DB (43.132.10), DNV·GL, CE