BÖHLER Bohler Union ER5183 AlMg4.5Mn Aluminium TIG Filler Wire 1.6 & 2.4MM - 2.5KG Pack

Bohler Union ER5183 AlMg4.5Mn Aluminium TIG Filler Wire 1.6 & 2.4MM - 2.5KG Pack Classifications EN ISO 18273-A AWS A5.10 S Al 5183 (AlMg4,5Mn0,7(A)) ER5183 Characteristics and typical fields of application TIG-rod for welding of AlMg alloys. The weld metal is resistant against sea water. Base material should be cleaned near the seam. Pre-heating 150 °C for plates > 15 mm Base materials EN AW-5083 [AlMg4,5Mn0,7] AlMg4,5Mn 3.3547 EN AW-5086 [AlMg4] AlMg4Mn 3.3545 EN AW-5019 [AlMg5] AlMg5 3.3555 EN AW-6060 [AlMgSi] AlMgSi0,5 3.3206 EN AW-6005A [AlSiMg(A)] AlMgSi0,7 3.3210 EN AW-6082 [AlSi1MgMn] AlMgSi1 3.2315 EN AW-6061 [AlMg1SiCu] AlMg1SiCu 3.3211 EN AW-7020 [AlZn4,5Mg1] AlZn4,5Mg 3.4335 EN AC-51300 G-AlMg5 3.3561 EN AC-51400 G-AlMg5Si 3.3261 Typical analysis of TIG-rod (wt.-%) Al Mg Mn Cr Ti wt.-% bal. 4.3 – 5.2 0.6 – 1.0 0.05 – 0.25 < 0.15 Mechanical properties of all-weld metal Yield strength Rp0.2 Tensile strength Rm Elongation A (L0=5d0) MPa MPa % 125 275 17 Operating data Polarity: AC Shielding gases: (EN ISO 14175) I1 Marks: 3.3548 / AlMg4,5Mn ø mm 1.6 2.0 2.4 3.2 4.0 Approvals TÜV (02196), DB (61.132.03), CE

BÖHLER Bohler Union 5356 ALMG5 Aluminium Tig Filler Rod 2.5KG

Böhler Union ALMG5(5356) Aluminium Magnesium TIG Filler Rods 5KG TIG welding rod for AlMg alloys containing up to 5 % Mg. High Strength: 5356 wire has relatively high tensile strength, making it suitable for applications where strength is a primary concern, such as in boat and shipbuilding, aerospace, and structural welding. Good Corrosion Resistance: This alloy offers good resistance to corrosion, which is vital for applications exposed to harsh environments, like marine or outdoor structures. Weldability: 5356 wire is known for its ease of use and smooth arc characteristics, making it suitable for both beginner and experienced welders. Low Melting Point: It has a lower melting point compared to some other aluminum alloys, which can help reduce the risk of burn-through or warping when welding thin aluminum materials. Anodizing Compatibility: 5356 aluminum is compatible with anodizing, which is a surface treatment process often used in various applications. Versatility: It can be used to weld various aluminum alloys, including 5052, 5083, 5086, 5154, and 6061. Spec: AWS A5.10 ER5356 Rod Diameter: 1.6mm, 2.4mm, 3.2mm Approvals: TÜV (2198.), DB (61.132.01)