Weld Star Weldstar 5356 AlMg5 Aluminium TIG Filler Rod 1.6, 2.4 & 3.2MM - 2.5KG Pack

Weldstar 5356 AlMg5 Aluminium TIG Filler Rod 1.6, 2.4 & 3.2MM - 2.5KG Pack Aluminium wire for welding aluminium alloys with a maximum 5% Magnesium. Features and Applications Excellent weldabillity and good mechanical strength, combined with good corrosion resistance in seawater conditions. AlMg5 is one of the most popular types of aluminium alloys. ER 5356 can also be used for welding components that need to be anodized. Thicker sections should be preheated to (150°C) prior to welding. Typically used on applications in the construction of boats, bicycles, trucks, pressure vessels, storage tanks, railways and automotive industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials AlMg3, AlMg4, AlMg5,AlMgSi0.5, AlMgSi1; AlMgMn, AlZnMg1, G-AlMg3Si, G-AlMg5Si, G-AlMg10, AlMg1SiCu, AlMgSi0,7, AlZn4,5Mg1, AlSi1MgMn, AlSiMg(A), 3.3545, 3.3206, 3.3210, 3.2315, 3.3211, 3.4335, EN AW 5086, EN AW 6060, EN AW 6005A, EN AW , EN AW 6061, EN AW 7020, EN AC 51400, EN AC 51300, EN AC 51100, EN AW 5454* * Illustrative, not exhaustive list   Standards EN ISO 18273 - S Al 5356 (AlMg5Cr(A)) AWS A5.10 - ER 5356   Chemical Composition % (Typical) Si% Fe% Cu% Mn% Mg%     0.0401 0.1561 0.0014 0.1140 4.8277                   Cr% Zn% Ti% Be% Al%     0.1383 0.0048 0.0939 <0.0001 Rem.       Mechanical Properties Tensile Strength ≥235 MPa   Yield Strength ≥110 MPa   Elongation ≥17 %   Impact Strength ≥16 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER1070 Al99.7 Aluminium TIG Filler Wire 2.5KG

Features and Applications High purity aluminium wire for welding pure aluminium. Highly resistant to weathering and chemical attack. Good resistance to atmospheric conditions in a wide range of corrosive media, particular alkaline environments. ER 1070 wire offers excellent weldability when properly cleaned prior to welding. Heavy parts and thicker plates should be pre-heated to (150°C) prior to welding. Typically used on applications for chemistry, electronics, construction and food industries etc.

Weld Star Weldstar ER5183 AlMg4.5Mn Aluminium TIG Filler Wire 2.5KG

Features and Applications Aluminium wire designed to meet the tensile strength requirements of high magnesium alloys. Excellent weldabillity and good mechanical strength, combined with good corrosion resistance in seawater conditions. Ideal for applications demanding high fracture toughness and impact. Not recommended for elevated temperature applications. Thicker sections should be preheated to (150°C) prior to welding. Typically used on applications in shipyards, automotive, railway, tanks and marine component fabrication etc