BÖHLER Bohler 1.0MM Thermanit 2209 (ER2209) Duplex Stainless MIG Wire 15KG

Characteristics and typical fields of application Thermanit 2209 is primarily designed for welding the duplex grade 2205 and similar but it can also be used for SAF 2304 type of steels. Thermanit 2209 provides a ferritic-austenitic weldment that combines many of the good properties of both ferritic and austenitic stainless steels. The welding can be performed using short, spray or pulsed arc. Welding using pulsed arc provides good results in both horizontal and vertical-up positions. Structure: Austenite with 45 – 55 % ferrite. Scaling temperature: Approx. 850 °C (air). Corrosion resistance: Very good resistance to pitting and stress corrosion cracking in chloride containing environments.

BÖHLER Bohler Thermanit GE316L Stainless Steel MIG Wire 15KG 300MM Metal Reel

Bohler Thermanit GE316L Stainless Steel MIG Wire 15KG 300MM Metal Reel Böhler Thermanit GE316L is a premium-quality stainless steel solid MIG welding wire developed for welding and surfacing austenitic stainless steels such as 316, 316L and similar CrNiMo stainless steel grades. Manufactured to the highest standards by Böhler Welding, this low-carbon ER316LSi wire provides outstanding corrosion resistance, excellent weldability, and a smooth, stable arc for high-quality welds in demanding industrial applications. Featuring an increased silicon content (Si), Thermanit GE316L offers excellent wetting characteristics, reduced spatter, and a superior weld bead appearance, making it ideal for food processing equipment, pharmaceutical installations, chemical processing plant, marine fabrication, and architectural stainless steel applications. The low carbon composition helps minimise the risk of intergranular corrosion after welding, while maintaining excellent mechanical properties and resistance to temperatures up to 400°C. Supplied on a 15kg, 300mm metal reel, this wire is suitable for use with standard MIG/MAG welding equipment and is available in a range of wire diameters to suit a variety of fabrication requirements. Key Features: Premium Böhler Thermanit GE316L stainless steel MIG wire Low carbon ER316LSi composition for improved corrosion resistance Excellent arc stability with low spatter levels Increased silicon content for superior weld bead appearance Ideal for welding 316, 316L and similar CrNiMo stainless steels Suitable for joining and surfacing applications Excellent resistance to intergranular corrosion Maximum service temperature up to 400°C Supplied on a 15kg 300mm metal reel Manufactured to stringent Böhler Welding quality standards Specifications: Product: Böhler Thermanit GE316L Stainless Steel MIG Wire Wire Classification: ER316LSi Reel Weight: 15kg Reel Size: 300mm Metal Reel (D300) Wire Type: Solid Stainless Steel MIG Wire Applications: Food Processing, Chemical Plant, Marine, Pharmaceutical, Architectural Stainless Steel, Pressure Vessels and General Stainless Steel Fabrication Suitable Materials: 316, 316L and similar austenitic stainless steels Maximum Service Temperature: 400°C Characteristics and typical fields of application Solid wire of G 19 12 3 L Si / ER316LSi type for joining and surfacing application with matching and similar non-stabilized austenitic CrNi(N) and CrNiMo(N)-steels and cast steel grades. Corrosion resistance similar to matching low-carbon and stabilized austenitic 17Cr-12Ni-2Mo-steels and cast steel grades. The wire shows very good wetting and feeding characteristics, with excellent weld metal toughness down to –320°F. Application temperature max. 750°F. Classifications EN ISO 14343-A - G 19 12 3 L Si EN ISO 14343-B - SS316LSi AWS A5.9 -  ER316Si / ER316LSi   Available In:  0.8MM 1.0MM 1.2MM   15KG Metal Reels  

BÖHLER Bohler 1.2MM DiamondSpark 46 RC Flux Cored MIG Wire 16KG 300MM Metal Reel

DiamondSpark 46 RC Seamless cored wire Low hydrogen all-positional seamless rutile flux cored wire for welding carbon-manganese and fine grain steels using Argon-CO2 or pure CO2 shielding gas. DiamondSpark 46 RC is a seamless copper-coated rutile flux-cored wire, developed for modern shipyard requirements and daily construction challenges. The wire has excellent weldability, productivity for welding of low and medium alloyed steels using Argon-CO2 shielding gas or pure CO2. The weld deposit has excellent mechanical properties till -30°C in mix gas and till -20°C in pure CO2 shielding gas. DiamondSark 46 RC is approved with both shielding gases in the grade 3YSH5 and the hydrogen level guarantee is below 4 ml/100 g, tested at 27°C , 80%HR for 12 weeks without any increase.   Product Features: Seamless design Extremely clean manufacturing process Ultra-low-hydrogen weld metal Total resistance against moisture absorption during storage and use Optimal protection against hydrogen cracking No porosities observed Faster painting process Fast freezing rutile slag system Enhancing travel speed and arc stability in positional welding Productive positional welding Automatic slag detachability Wide parameter window More spray arc welding Easy arc setting Easy welding in overhead position Excellent feedability Low contact tip wear Trustable performance with long welding cable Less down-time for maintenance No wire breaks Stable arc Sharp arc Low spatter Good weldability Good wetting Less post-weld cleaning Very flat root pass No undercut Copper coated Excellent current transfer Rust resistance Easy handling Safer storage Designed chemistry Excellent CVN impact toughness down to –30°C mix gas and to -20°C in pure CO2 Highest welding performance in welding travel speed in particular in PF position Low fume emission Wide margin to cover both strength and CVN impact requirements Faster weld execution Healthy working place   Typical Applications: General construction Shipbuilding  

BÖHLER UTP AF Robotic 600 1.2mm Hardfacing Mig Wire 16kg

Bohler UTP AF ROBOTIC 600 is an example of an innovative, tailor-made product – developed to optimally fulfill requirements in the waste & recycling industry. It is a seamless, copper-coated, gas-shielded cored wire for the hardfacing of components subjected to extreme combinations of pressure, impact and abrasion wear, such as shredders. The wire can be used in all welding positions and has excellent characteristics for the robotic welding of new equipment, for example onto shredder teeth. It performs equally well in semi-automatic GMAW used for on-site-repair of worn components. When overlay welding onto S355 base material, a crack-free deposit with hardness of 55 HRC is already obtained in the first layer, increasing to a level of 57-62 HRC with the following layers. As such, the full weld overlay thickness will contribute to the wear resistance leading to a higher service life of the repaired components until next maintenance becomes necessary. With a record of hundreds of successful applications, UTP AF ROBOTIC 600 has proven to meet the growing demand within the recycling industry for efficient maintenance solutions to protect machinery against wear and prolong the life of shredder components. UTP AF ROBOTIC 600 Premium seamless gas-shielded cored wire for the hardfacing of shredders   Product Features:   Seamless copper-coated cored wire Excellent, smooth wire feeding Reduced contact tip wear Resistant to moisture and rust formation Controlled wire cast & helix Limited “dog tailing” at contact tip, promoting well positioned beads Wider window of applicable welding parameters than solid wire Significantly higher deposition rates and Welding productivity Easy setting of parameters Allows calm, spatter-free spray arc welding Weldable in all welding positions One wire for all hardfacing jobs, regardless position Available in drums with high filling content Less downtime for spool exchange Total product performance from above features Dependable and productive welding consumable for automated / robotic welding

BÖHLER Bohler Mild Steel SG2 Migwire A18 ER70S-6 G3Si1 - 15KG Plastic Reel

Experience top-quality welding with our Premium Bohler QG 3 SG2 copper-coated solid MIG welding wire, designed for gas metal arc welding (GMAW). This wire is a go-to choice for professionals working in boiler and vessel fabrication. It's also perfectly suited for structural and engineering projects involving unalloyed and low-alloyed carbon-manganese steels, making it a versatile addition to your welding toolkit. Key Specifications: Complies with EN ISO 14341-A G 42 3 M21 3Si1 / G 42 3C1 3Si1 and AWS A5.18: ER70S-6 standards. Compatible with an Argon/CO2 gas mix or pure CO2 as the shielding gas, offering flexibility in various welding scenarios.