Weld Star Weldstar Mild Steel MIG Wire SG2(G3Si1) ER70S-6 1KG Reel

Weldstar Mild Steel MIG Wire SG2(G3Si1) ER70S-6 1KG Reel Features and Applications A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Good mechanical properties at sub-zero temperatures down to -40ºC. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 <0.35             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 0.60 mm 50-100 15-20 0.80 mm 60-200 18-24 1.00 mm 80-300 18-28    Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Box Qty 0.60 mm 0.80 mm 1.00 mm 1 Kg 1 Kg 1 Kg D100 D100 D100 20 20 20 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star Weldstar ER316L Stainless Steel MIG Wire 5KG 200MM Reel

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. The presence of molybdenum provides creep resistance in a halide atmosphere. ER 316LSi is slightly magnetic and offers good corrosion resistance. Ideal for welding low-carbon molybdenum-bearing austenitic alloys, including joining and surfacing of stainless steels type 316, 316L and 316Ti. High temperature resistance up to 400°C. Precision layer wound for superior wire feeding characteristics. Typically used on applications where good corrosion resistance is required, such as in acid media a/o in chlorinated solutions, hot water tanks, architectural and roofing, food processing and chemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials All 300 series austenitic stainless steel, particularly 316 and 316L* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 19 12 3 L Si AWS A5.9 - ER 316LSi  

Weld Star Weldstar ER312 Stainless Steel Migwire 15KG 300MM Reel

Features and Applications Austenitic stainless steel wire originally designed to weld cast alloys of similar composition. It gives a two-phase weld deposit with substantial percentages of ferrite in austenite matrix. Ideal for welding dissimilar metals such as carbon steel to stainless steel, particularly those grades high in nickel. Due to its high ferrite level, ER 312 is very adapted to heterogeneous welding, especially when one of the components is fully austenitic. Good corrosion oxidation resistance at high temperature due to its high content of Cr. Service temperatures should be below 420°C to prevent formation of secondary brittle phases. Precision layer wound for superior wire feeding characteristics. Typically used on industrial furnaces, annealing chambers, fused salt treatment installations and boiler parts, as well as heat exchangers etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Mild and low alloy steels, stainless steel of similar composition, Buffer layers, armor plate, 409, 304, difficult to weld steels such as:, 25CrMo4, 42CrMo4, 50CrMo4, 42MnV7, 1.7218, 1.7225, 1.7228, 1.7223, AISI: 4130, 4140, 4150, C45, C60, tool steel repairs etc* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 29 9 AWS A5.9 - ER 312   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.091 1.59 0.46 0.004 0.021                   Ni% Cr% Mo% Cu%       20.68 26.65 0.040 0.21         Mechanical Properties Tensile Strength ≥650 MPa   Yield Strength ≥450 MPa   Elongation ≥15 %   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

Weld Star Weldstar E71T-GS Flux Cored Migwire 0.5KG 100MM Reel

Weldstar E71T-GS Flux Cored Migwire 0.5KG 100MM Reel Applications include auto body repairs, tanks, boiler and construction works, 100mm reel is designed for use on spool guns and smaller welders Features and Applications E71T-GS is a self-shielded all position flux cored welding wire for single pass applications. Designed for welding thin carbon and carbon-manganese steels. Offers smooth stable arc, low spatter, easy slag removal and excellent bead appearance. Vacuum-sealed aluminium foil packaging to prevent moisture absorption. Precision layer wound for superior wire feeding characteristics. Applications include auto body repairs, tanks, boiler and construction works. Test Certificates can be found online @wilkinsonstar247.com      Standards AWS A5.20 - E71T-GS   Chemical Composition % (Typical) C% S% Mn% P% Si% Ni % Al% 0.22 0.0010 0.91 0.012 0.25 0.011 1.78   Mechanical Properties (Typical) Tensile Strength ≥480 MPa   Yield Strength ≥400 MPa   Elongation -   Impact Strength -   Test Temperature -   Mechanical properties are approximate and may vary based on the heat, welding parameters and other factors.    Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star Weldstar Dual Core 70M Seamless MIG Wire 1.2MM 16KG 300MM Wire Reel

Weldstar Dual Core 70M Seamless MIG Wire 1.2MM 16KG 300MM Wire Reel Ideal for automated welding applications such as orbital Mag or robotic welding Typically used on steel structures, pipelines, shipbuilding, non-alloy and fine grain steels, pressure vessels, offshore, mechanical engineering, heavy transport and general fabrication etc. Features and Applications Seamless metal cored wire with remarkable stable arc and no spatter. Meets NACE (HIC & SSC) requirements for sour service welding application in oil & gas industry. Can also be used for constructions that needs post weld heat treatment after welding and still offers mechanical properties to grade 5Y46 class. Due to the seamless technology the typical diffusible hydrogen content is <3.0 ml 100 g. Test certificates supplied as 3.1 which is actual weld chemistry + mechanicals according EN 10204:2004. Precision layer wound for superior wire feeding characteristics.    Typical Base Materials Shipbuilding steelsStructural steelsBoiler steelsPipe steelsFine grain steelsSteel acc. API-standard A, B, D, AH 32 - EH 36S185 - S355, A 106 Gr.B, A 333 Gr. 6P235GH - P355GHP235T1/T2 - P460NL2; L210 - L445MBS235 - S460QL1X42 - X60 * Illustrative, not exhaustive list   Standards EN ISO 17632-A - T 46 (42) 6 (2) M M21 (C1) 1 (3) H5 AWS A5.18 - E70C-6M H4   Chemical Composition % (Typical) C% Si% Mn% P% S% Cr% Ni% 0.06 0.75 1.56 0.008 0.006 0.022 0.021               Mo% Cu% Al% V% Ti% Nb%   0.005 0.085 0.006 0.005 0.015 0.002     Mechanical Properties (Typical) Shielding Gas M21   Tensile Strength 600 MPa   Yield Strength 530 MPa   Elongation 27%   Impact Strength 140 J 100 J Test Temperature -40ºC -60ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 1.00 mm 70-220 14-26 1.20 mm 90-330 14-31 1.60 mm 180-420 25-38   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Dual Core 316L-T1 MIG Wire 1.2MM - 15KG

Weldstar Dual Core 316L-T1 MIG Wire 1.2MM - 15KG Features and Applications Rutile flux cored stainless steel wire for gas-shielded arc welding. 19% chromium - 12% nickel - 3% molybdenum - low carbon deposit. Attractive bead appearance, automatic slag release, very good penetration and high productivity. Excellent X-ray soundness. Specifically designed for out-of-position welding. Maximum productivity for completion of vertical welds. Precision layer wound for superior wire feeding characteristics. Suitable for welding stainless steels with an alloy content between 16 to 21% Cr, 6 to 13% Ni and up to 3% Mo, stabilised and un-stabilised types. Test Certificates can be found online @wilkinsonstar247.com     Typical Base Materials AISI 316 316L 316LN 316Ti 318 UNS S31600 S31603 S31653 S31635 S31640 EN Symbol X5 CrNiMo 17-12-2 X2 CrNiMo 17-13-2 X2 CrNiMoN 17-12-2 X6 CrNiMoTi 17-12-2 X10CrNiMoNb 18-12 * Illustrative, not exhaustive list   Standards EN ISO 17633-A - T 19 12 3 L P M21 1 / T 19 12 3 L P C1 1 AWS A5.22 - E316LT1-4 - E316LT1-1   Chemical Composition % (Typical) C% Mn% Si% Cr% Ni% Mo % S% P% 0.03 1.40 0.80 19.0 12.0 2.90 0.008 0.020   Mechanical Properties (Typical) Shielding Gas M21   Tensile Strength 600 MPa   Yield Strength 490 MPa   Elongation 35%   Impact Strength 50 J   Test Temperature -60ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 1.20 mm 130-270 22-35   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Dual Core HF600-G MIG Wire 1.2MM - 15KG

Weldstar Dual Core HF600-G MIG Wire 1.2MM - 15KG Features and Applications Seamless high fill copper coated tubular wire for semi-automatic applications. Ideal for hardfacing components subject to abrasion and moderate impact. Unique welder appeal. Deposition rate increased by up to 20% when compared to solid wire. Martensitic weld metal contains finely dispersed hard carbides ensuring an optimal balance between abrasion, friction and impact resistance. Abrasion resistance at service temperatures up to 450°C. Preheat will be determined by the application and whether micro cracking in the deposit is acceptable. According to the base material preheating in the range 150°C - 300°C may be necessary. Precision layer wound for superior wire feeding characteristics. Typically used on bucket teeth, bucket lips, bulldozer blades, crusher jaws, scraper blades, chutes, pump housings, conveyor screws, slide plates, gear teeth, crusher hammers, drilling bits, ploughshares, reamers etc. Test Certificates can be found online @wilkinsonstar247.com    Standards EN ISO 14700 - T Fe2   Chemical Composition % (Typical) C% Mn% Si% P% S% Cr%  Ni% 0.5 1.2 0.6 0.010 0.013 5.7 0.05               Mo% Cu% Fe% Co% V% W%   0.80 0.10 Bal 0.006 0.010 <0.09     Hardness (HRC) Current Type Hardness - First Layer Hardness - Third Layer DC+ 52-55 54-57 DC- 55-57 57-60 Peak hardness in the range 50-62 HRC could be achieved in three layers. Direct polarity negative reduces dilution and favours higher hardness. Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Wear Type Suitability   Welding Parameters Ømm Current (A) Voltage (V) 1.20 mm 110-300 16-32   Shielding Gases EN ISO 14175 - M12, M20, M21   Welding Positions EN ISO 6947 - PA, PB

Weld Star Aluminium ER4043 AlSi5 MIG Wire 7KG Reel 300MM Reel

Aluminium ER4043 AlSi5 MIG Wire 7KG Reel 300MM Spool Diameter  Why use 4043 grade Aluminium wire?   General Purpose Welding: 4043 is often chosen as a general-purpose aluminum welding wire because it can be used for a wide range of aluminum alloys. It's suitable for welding 3003, 3004, 5052, 6061, and other common aluminum alloys. Good Fluidity: 4043 wire has good fluidity during welding, which means it flows smoothly and creates clean and aesthetically pleasing welds. Low Melting Point: It has a lower melting point compared to some other aluminum welding wires, making it suitable for thin aluminum materials and reducing the risk of burn-through. Low Hot Cracking Sensitivity: 4043 wire has relatively low hot cracking sensitivity, which means it is less likely to crack during the welding process, especially when used on aluminum alloys with a high thermal expansion coefficient. Corrosion Resistance: While not as corrosion-resistant as 5356 aluminum welding wire, 4043 still offers reasonable corrosion resistance, making it suitable for many applications. Heat-Treatable Alloys: It is commonly used for welding heat-treatable aluminum alloys because it minimizes the risk of affecting the heat treatment properties of the base metal. Marine and Automotive Applications: 4043 wire is often used in marine and automotive industries for tasks such as repairing aluminum boats or welding components in automotive applications.

Weld Star Weldstar Dual Core HF55-0 MIG Wire 15KG

Features and Applications Metal cored tubular wire for self-shielded metal arc hardfacing. High chromium cast iron deposit containing a high proportion of hard primary chromium carbides in a tough austenitic matrix. The deposit is suitable for hardfacing components subject to extremely severe abrasive wear and moderate impact. Relief checking is normal and does not affect the properties of the deposit. However it is recommended putting down only two layers unless impact loading is small. Multi-layer deposits are possible in specific applications. Precision layer wound for superior wire feeding characteristics. Typically used on gyratory crusher cones and mantles, catalyst pipes and valves, slurry pipes and valve bodies, dredge pump bodies, sand dredge parts, extruder screws, “barmac” crushers, mining and earthmoving equipment, blast furnace bells, brick muller tyres, crusher hammers and rolls, riddle plates, wear plates, drag line components, screw conveyors for cement, cone knives and shredders, etc Test Certificates can be found online @wilkinsonstar247.com    Standards EN ISO 14700 - T Fe15   Chemical Composition % (Typical) C% Mn% Si% P% S% 5.5 1.2 1.7 0.008 0.010           Cr% Ni% Mo% Fe% Nb% 28.0 0.15 0.04 Bal 0.020 Structure is primary carbides and eutectic carbides of the M7C3 type in an austenitic matrix.   Hardness (HRC) Current Type Hardness - Third Layer DC+ 58-64 Mechanical properties are approximate and may vary based on the heat, welding parameters and other factors.   Wear Type Suitability   Welding Parameters Ømm Current (A) Voltage (V) 1.20 mm 100-250 21-28 1.60 mm 160-320 24-30   Welding Positions EN ISO 6947 - PA

Weld Star Endurance Bulk Pack Wire Feed Conduit With Quick Release

Quick connect conduit to suit our decoiling Endurance Pac dome. High wear resistance with low coefficient of friction at the same time. Excellent durability even under extreme conditions. Suitable for unalloyed, low alloyed and high alloy wires.   This set includes: 1 x conduit with quick connect fittings. 1 x wire feeder inlet guide 12mm with quick connect. 1 x dome base plate with quick connect.   DOME NOT INCLUDED

Weld Star Weldstar FN55 E NiFe-Cl MIG Wire 15KG

Features and Applications Ferro-nickel solid wire used for welding cast iron and ductile iron. Suitable for dissimilar joints between cast iron, mild steel, low alloy and stainless steels. Recommended for welding high sulphur, phosphorous or lubricant-contaminated castings. Precision layer wound for superior wire feeding characteristics. Typically used for a range of repair and fabrication applications, including rebuilding shafts, wheels, critical joints between steel and cast iron etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Grey cast iron, malleable, nodular** Illustrative, not exhaustive list   Standards EN ISO 1071 - SC NiFe-1 AWS A5.15 - E NiFe-CI   Chemical Composition % C% Mn% Si% P% S%     max max max max max     2.00 0.80 0.20 0.03 0.03                   Fe% Ni% Cu% Al%       rem. 54.00 max max         56.00 2.50 1.00         Mechanical Properties Tensile Strength 400 - 579 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, Ar + 1-2% O2   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar Alloy 625 NiCrMo-3 MIG Wire 15KG

Features and Applications High nickel alloy wire developed for welding and cladding nickel-based alloys such as 625 or similar material. Solid drawn in a very special way to obtain cleaner and higher quality welds with a bright seam and excellent ductility. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion. Recommended working temperature ranges from cryogenic to 540°C. Precision layer wound for superior wire feeding characteristics. Typically used in the chemical process industry, marine engineering, nuclear reactor components, aerospace and within pollution control equipment etc.    Typical Base Materials Inconel 601, Incoloy 800, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6625 - NiCr22Mo9Nb AWS A5.14 - ER NiCrMo-3   Chemical Composition % C% Mn% Fe%  P% S% Si%  Cu% max max max max max max max 0.10 0.50 0.50 0.015 0.015 0.50 0.50               Ni%  Co% Al% Ti% Cr%  Nb+Ta% Mo% 60.00 max max max 20.00 3.15 8.00 min 1.0 0.40 0.40 23.00 4.15 10.00   Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength ≥415 MPa   Elongation ≥35%   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar Alloy 82 NiCr-3 MIG Wire 15KG

Features and Applications Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Precision layer wound for superior wire feeding characteristics. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER310 Stainless Steel MIG Wire 15KG

Features and Applications Austenitic stainless steel wire most often used to weld base metals of similar composition. Excellent resistance to oxidation, especially at high working temperatures (lower than 1000°C) due to its high Cr content. Fully austenitic and therefore sensitive to hot cracking. Ideal for welding and overlay of stainless steels of similar chemical composition including dissimilar welding. Precision layer wound for superior wire feeding characteristics. Typically used on industrial furnaces, annealing chambers, fused salt treatment installations and boiler parts, as well as heat exchangers etc.    Typical Base Materials 300 series austenitic stainless steel for welding (e.g. AISI 310, 304); mild and carbon steels for overlay works* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 25 20 AWS A5.9 - ER 310

Weld Star Weldstar ER309LSi Stainless Steel MIG Wire 15KG

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. High temperature oxidation and corrosion resistance up to 300°C. Ideal for joining and overlay of stainless steels of similar composition, such as AISI 309 castings and for joining of 3Cr12. Good performance under carburising atmospheres. Precision layer wound for superior wire feeding characteristics. Typically used on buffer layers before hardfacing, dissimilar joints between ferritic and austenitic steels and or difficult to weld steels etc.    Typical Base Materials 42CrMo4, C45, 42MnV7, tool steels etc, 1.2780, 1.4541, 1.4550, 1.4710, 1.4712, 1.4713, 1.4724, 1.4729, 1.4740, 1.4741, 1.4742, 1.4746, 1.4762, 1.4745, 1.4825, 1.4826, 1.4828, 1.4832, 1.4878, X15CrNiSi20 12, G-X 40 CrNiSi209, AISI 446, AISI442, AISI309, UNS S30900, UNS S44200, UNS S4460* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 23 12 L Si AWS A5.9 - ER 309LSi

Weld Star Weldstar ER308LSi Stainless Steel MIG Wire 15KG

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation. ER 308LSi is used to weld base metals of a similar chemical composition such as 304, 305 and 347 etc. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for applications requiring atmospheric corrosion resistance typically in urban and rural media’s. Good mechanical strength at sub-zero temperatures down to -196°C. Precision layer wound for superior wire feeding characteristics. Typically used on a wide range of applications including pipe work, plate fabrication and vessel production etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials W.Nr:   1.4306, 1.4301, 1.4541, 1.4550, 1.4311, 1.4546, 1.4312, 1.4300, 1.4312, 1.4371, 1.4541, 1.4543, 1.4550, 1.4452* DIN: X2CrNi 19 11 (TP), X4CrNi 18 10 (TP), X6CrNiTi 18 10 (TP), X6CrNiNb 18 10 (TP), X2CrNiN 18 10 (TP), X5CrNiNb 18 10, G-X10CrNi 18 8 (TP)* AISI: 202, 302, 304L, 304, 305, 321, 347, 304 LN, ASTM A320 Grade B8C/D, 302* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 19 9 LSi AWS A5.9 - ER 308LSi   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.023 1.86 0.89 0.001 0.025                   Ni% Cr% Mo% Cu%       9.30 19.68 0.027 0.041         Mechanical Properties Tensile Strength ≥510 MPa   Yield Strength ≥320 MPa   Elongation ≥25 %   Impact Strength ≥80 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters - M12 Ømm Current (A) Voltage (V) 0.80 mm 40-120 15-20 1.00 mm 80-160 16-22 1.20 mm 100-210 17-23   Welding Parameters - M13 Ømm Current (A) Voltage (V) 0.80 mm 160-210 24-28 1.00 mm 180-280 25-30 1.20 mm 200-300 26-32   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar SG3 G4Si1 Mild Steel MIG Wire 250KG Endurance Pac

Features and Applications Bulk wire drum system that offers a high productivity solution for continuous high volume welding applications. A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. The higher Si-Mn content increases the weld metal strength and leaves a good bead appearance. Designed for semi-automatic and full-automatic GMAW applications. Good mechanical properties at sub-zero temperatures down to -40ºC. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 46 4 M21 4Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.95 1.70 <0.020 <0.020 <.025             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.050 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 570 MPa 590 MPa Yield Strength 460 MPa 490 MPa Elongation 30% 28% Impact Strength 58 J 88 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Gas Shielded Dual Core 71R Seamless Wire 1.2MM 16KG

Features and Applications Seamless rutile flux cored wire with rapidly solidifying slag. Excellent welding properties combined with extreme impact toughness down to -40ºC. The wire is all positional and runs with a very stable soft arc producing excellent weld bead finish with negligible spatter. Ideal for root welding on ceramic backing. Due to the seamless technology the typical diffusible hydrogen content is <3.0 ml 100 g. Test certificates supplied as 3.1 which is actual weld chemistry + mechanicals according EN 10204:2004. Precision layer wound for superior wire feeding characteristics. Typically used on steel structures, pipelines, shipbuilding, non-alloy and fine grain steels, pressure vessels, offshore, mechanical engineering, heavy transport and general fabrication etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Shipbuilding steelsStructural steelsBoiler steelsPipe steelsFine grain steelsSteel acc. API-standard A, B, D, AH 32 - EH 36S185 - S355P235GH - P355GHP235T1/T2 - P460NL2 L210 - L445MBS235 - S460QL1X42 - X60 * Illustrative, not exhaustive list   Standards EN ISO 17632-A - T 46 4 (2) P M21 (C1) 1 H5 AWS A5.20 - E71T-1M (C1) J H4   Chemical Composition % (Typical) C% Si% Mn% P% S% Cr% Ni% 0.03 0.41 1.29 0.012 0.006 0.030 0.013               Mo% Cu% Al% V% Ti% Nb%   0.004 0.145 0.002 0.020 0.044 0.012     Mechanical Properties (Typical) Shielding Gas M21   Tensile Strength 600 MPa   Yield Strength 530 MPa   Elongation 26%   Impact Strength 100 J 70 J Test Temperature -40ºC -20ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 1.00 mm 140-230 19-25 1.20 mm 160-280 21-29 1.60 mm 190-350 23-32   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star SG3 G4Si1 MIG Wire 15KG - 300MM Plastic Reel

Features and Applications A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. The higher Si-Mn content increases the weld metal strength and leaves a good bead appearance. Designed for semi-automatic and full-automatic GMAW applications. Good mechanical properties at sub-zero temperatures down to -40ºC. Vacuum-sealed aluminium foil packaging to prevent moisture absorption. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 46 4 M21 4Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.95 1.70 <0.020 <0.020 <.025             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.050 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 570 MPa 590 MPa Yield Strength 460 MPa 490 MPa Elongation 30% 28% Impact Strength 58 J 88 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg D300 D300 D300 72 72 72

Weld Star Copper Free (CF2) Mild Steel SG2 (G3Si1) MIG Wire 15/18KG

Features and Applications A non-copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Environmentally friendly when compared against traditional copper wires offering less fume and smoke in the working environment. Advantages of a stable arc when working with increased welding speeds that achieves high quality welds with almost no spatter. Good mechanical properties at sub-zero temperatures down to -40ºC. Vacuum-sealed plastic bag packaging to prevent moisture absorption. Fitted with alignment hole clip to ensure smooth feeding. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 0.010             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 18 Kg 18 Kg BS300 BS300 BS300 72 56 56 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance

Weld Star Alloy 82 (NiCr-3) MIG Wire 15KG

Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Precision layer wound for superior wire feeding characteristics. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star Nickel Alloy 625 (NiCrMo-3) MIG Wire 15KG

Features and Applications High nickel alloy wire developed for welding and cladding nickel-based alloys such as 625 or similar material. Solid drawn in a very special way to obtain cleaner and higher quality welds with a bright seam and excellent ductility. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion. Recommended working temperature ranges from cryogenic to 540°C. Precision layer wound for superior wire feeding characteristics. Typically used in the chemical process industry, marine engineering, nuclear reactor components, aerospace and within pollution control equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Inconel 601, Incoloy 800, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6625 - NiCr22Mo9Nb AWS A5.14 - ER NiCrMo-3   Chemical Composition % C% Mn% Fe%  P% S% Si%  Cu% max max max max max max max 0.10 0.50 0.50 0.015 0.015 0.50 0.50               Ni%  Co% Al% Ti% Cr%  Nb+Ta% Mo% 60.00 max max max 20.00 3.15 8.00 min 1.0 0.40 0.40 23.00 4.15 10.00   Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength ≥415 MPa   Elongation ≥35%   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER2594 Super Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic wire for welding all grades of super duplex stainless steels. Provides matching chemistry and mechanical property characteristics to wrought super duplex alloys such as 2507 and Zeron 100. Excellent resistance to aggressive environments as well as to pitting and crevice corrosion in warm seawater applications. The presence of Cu and W provides superior resistance to sulphuric and hydrochloric acids when compared to similar alloys without these additions. Improved resistance over austenitic stainless to erosion corrosion and fatigue. Precision layer wound for superior wire feeding characteristics. Typically used in the oil and gas industries, seawater systems, petrochemical and pharmaceutical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32530, S32550, S32750, S32760, 1.4501** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G Z 25 9 4 N L W AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P% Ni%    <0.03 <1.00 <1.00 <0.020 <0.035 9.28                 Cr% Mo% Cu% N% W%     25.12 3.60 0.59 0.22 0.62       Mechanical Properties Tensile Strength ≥750 MPa   Yield Strength ≥550 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER2209 Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Precision layer wound for superior wire feeding characteristics. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF     Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER347Si Stainless Steel MIG Wire 15KG

Stainless Steel Grade ER347Si: ER347Si is a type of stainless steel MIG wire that is specifically designed for welding and joining stainless steel components. It belongs to the austenitic family of stainless steels and offers excellent corrosion resistance, high strength, and good formability. MIG Welding: ER347Si wire is used in the MIG (Metal Inert Gas) welding process, also known as Gas Metal Arc Welding (GMAW). MIG welding utilizes a consumable wire electrode and an inert gas, such as argon or a mixture of argon and carbon dioxide, to shield the weld pool from atmospheric contamination. ER347Si MIG Wire: ER347Si MIG wire is formulated with a specific composition suitable for welding stainless steel grade 347 or similar materials. The "ER" prefix indicates that it is an electrode or rod used for welding, and the "Si" signifies the addition of silicon in its composition. Low Carbon Content: ER347Si MIG wire contains a low carbon content to minimize the risk of carbide precipitation and intergranular corrosion during welding. This makes it well-suited for applications where the welded joints will be exposed to corrosive environments. Silicon Addition: The inclusion of silicon in ER347Si wire improves the fluidity of the weld pool, facilitating good wetting and penetration during welding. It also contributes to stable arc characteristics and reduced spatter. Welding Applications: ER347Si MIG wire is commonly used for welding stainless steel components in various industries, including petrochemical, power generation, food processing, and automotive. It is suitable for joining stainless steel pipes, tanks, and equipment exposed to high temperatures and corrosive environments. Compatibility: ER347Si MIG wire is typically used with stainless steel grade 347 base metal or similar stabilized austenitic stainless steels. Grade 347 stainless steel offers improved resistance to intergranular corrosion and sensitization due to the addition of niobium (columbium). Shielding Gas: When using ER347Si MIG wire, a shielding gas containing argon or a mixture of argon and carbon dioxide is commonly used to protect the weld from oxidation and atmospheric contamination. Remember to follow the manufacturer's recommendations and welding procedures to ensure proper welding results and performance when using ER347Si stainless steel MIG wire.

Weld Star ER316Lsi Stainless Steel MIG Wire 15KG

Weld Star ER316Lsi Stainless Steel MIG Wire 15KG   Features & Benefits Stainless Steel Grade 316LSi: Grade 316LSi is a low-carbon variation of stainless steel grade 316. It is an austenitic stainless steel, which means it is non-magnetic and offers excellent corrosion resistance, high strength, and good formability. MIG Welding: MIG (Metal Inert Gas) welding, also known as Gas Metal Arc Welding (GMAW), is a popular welding process that uses a consumable wire electrode and an inert gas, typically argon or argon mixtures, to shield the weld pool from atmospheric contamination. 316LSi MIG Wire: 316LSi MIG wire is specifically designed for MIG welding applications that involve stainless steel grade 316 or similar materials. The "LSi" in its name stands for "low carbon, silicon added," indicating its composition and improved weldability. Low Carbon Content: The low carbon content in 316LSi MIG wire helps to minimize carbide precipitation during welding, which can lead to intergranular corrosion. This makes it suitable for applications where post-welding exposure to corrosive environments is a concern. Silicon Addition: The addition of silicon to the wire enhances the fluidity of the weld pool and promotes good wetting and penetration characteristics. It also contributes to improved arc stability and reduced spatter during welding. Welding Applications: Grade 316LSi MIG wire is commonly used for welding stainless steel components in various industries, including chemical processing, food and beverage, pharmaceuticals, marine applications, and architectural structures. It is suitable for joining stainless steel plates, sheets, pipes, and fittings. Compatibility: 316LSi MIG wire is typically used with the same grade of base metal, such as 316 stainless steel or similar austenitic stainless steels. It provides good corrosion resistance in a wide range of environments, including those with exposure to acids, chlorides, and marine conditions. Shielding Gas: When using 316LSi MIG wire, a shielding gas containing argon or a mixture of argon and carbon dioxide is commonly used to protect the weld from oxidation and atmospheric contamination. It's important to follow the manufacturer's guidelines and welding procedures when using stainless steel MIG wire grade 316LSi to ensure proper weld quality and performance.

Weld Star ER307Si Stainless Steel MIG Wire 15KG Reel

Features and Applications Austenitic stainless steel wire with a significant amount of manganese, making the all weld metal in most cases fully austenitic. High mechanical strength and excellent crack resistance. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for dissimilar welding between steel and stainless steel, armour plate and exhaust systems etc. Suitable for depositing stress relaxing buffer layers on crack sensitive base metals including hardfacing. Precision layer wound for superior wire feeding characteristics. Typically used on applications subject to atmospheric and corrosive media’s. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Armour plate, exhaust systems (type 409, 304), high Manganese austenitic steel, difficult to weld steels such as 42CrMo4, C45, 42MnV7, tool steels, 1.3401, X120Mn12 etc.* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 18 8 Mn AWS A5.9 - ER 307Si   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.045 6.06 0.82 0.005 0.029                   Ni% Cr% Mo% Cu%       8.02 18.35 0.05 0.030         Mechanical Properties Tensile Strength ≥500 MPa   Yield Strength ≥350 MPa   Elongation ≥25 %   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters - M12 Ømm Current (A) Voltage (V) 0.80 mm 40-120 15-20 1.00 mm 80-160 16-22 1.20 mm 100-210 17-23   Welding Parameters - M13 Ømm Current (A) Voltage (V) 0.80 mm 160-210 24-28 1.00 mm 180-280 25-30 1.20 mm 200-300 26-32   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star Aluminium ER4043 AlSi5 MIG Wire 2KG Reel

Aluminium ER4043 AlSi5 MIG Wire 2KG Reel 200MM Spool Diameter  Why use 4043 grade Aluminium wire?   General Purpose Welding: 4043 is often chosen as a general-purpose aluminum welding wire because it can be used for a wide range of aluminum alloys. It's suitable for welding 3003, 3004, 5052, 6061, and other common aluminum alloys. Good Fluidity: 4043 wire has good fluidity during welding, which means it flows smoothly and creates clean and aesthetically pleasing welds. Low Melting Point: It has a lower melting point compared to some other aluminum welding wires, making it suitable for thin aluminum materials and reducing the risk of burn-through. Low Hot Cracking Sensitivity: 4043 wire has relatively low hot cracking sensitivity, which means it is less likely to crack during the welding process, especially when used on aluminum alloys with a high thermal expansion coefficient. Corrosion Resistance: While not as corrosion-resistant as 5356 aluminum welding wire, 4043 still offers reasonable corrosion resistance, making it suitable for many applications. Heat-Treatable Alloys: It is commonly used for welding heat-treatable aluminum alloys because it minimizes the risk of affecting the heat treatment properties of the base metal. Marine and Automotive Applications: 4043 wire is often used in marine and automotive industries for tasks such as repairing aluminum boats or welding components in automotive applications.

Weld Star Weldstar ER80S-G Corten MIG Wire 15KG 300MM Reel

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Precision layer wound for superior wire feeding characteristics. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.         

Weld Star HF600 Solid Hard Facing MIG Wire 15kg 300MM Metal Reel

Features and Applications Copper coated high alloy solid wire for hardfacing and overlay of all C-Mn steels. This alloy deposits a martensitic structured weld metal with a hardness of about 54-60 HRC. Excellent abrasion resistance to moderate impact and high toughness. The weld metal has a Cr-Si structure and if not tempered can only be machined by grinding. Mostly used with semiautomatic and automatic procedures. A buffer layer is essential with hard to weld steels. Precision layer wound for superior wire feeding characteristics. Typically used on excavators in the mining industry, cylinder crushers, pneumatic hammers, knives, cutting and cold working tools, crumbling jaws, anvils, caterpillars, screws, guide rollers, etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials X45CrSi9-3, 4Xr9Si2, X45CrSi8, HNV1, HNV2, SUH11, X45CrSi 9-3, 401 S45, SUH 1, STR 1, 40Ch9S2** Illustrative, not exhaustive list   Standards EN ISO 14700 - S Fe 8 DIN 8555 - MSG 6-GZ-60-GP   Chemical Composition % (Typical) C% Mn% Si% S%       0.46 <0.60 3.05 <0.030                     Cu% P% Ni% Cr%       <0.25 <0.040 <0.50 9.10         Mechanical Properties Hardness (HRC) - 54 - 60 Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.  

Weld Star Mild Steel SG2 G3Si1 MIG Wire 250kg Marathon Bulk Pack

Features and Applications Bulk wire drum system that offers a high productivity solution for continuous high volume welding applications. A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Good mechanical properties at sub-zero temperatures down to -40ºC. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 <0.35             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG