Weld Star Weldstar E71T-GS Flux Cored Migwire 0.5KG 100MM Reel

Weldstar E71T-GS Flux Cored Migwire 0.5KG 100MM Reel Applications include auto body repairs, tanks, boiler and construction works, 100mm reel is designed for use on spool guns and smaller welders Features and Applications E71T-GS is a self-shielded all position flux cored welding wire for single pass applications. Designed for welding thin carbon and carbon-manganese steels. Offers smooth stable arc, low spatter, easy slag removal and excellent bead appearance. Vacuum-sealed aluminium foil packaging to prevent moisture absorption. Precision layer wound for superior wire feeding characteristics. Applications include auto body repairs, tanks, boiler and construction works. Test Certificates can be found online @wilkinsonstar247.com      Standards AWS A5.20 - E71T-GS   Chemical Composition % (Typical) C% S% Mn% P% Si% Ni % Al% 0.22 0.0010 0.91 0.012 0.25 0.011 1.78   Mechanical Properties (Typical) Tensile Strength ≥480 MPa   Yield Strength ≥400 MPa   Elongation -   Impact Strength -   Test Temperature -   Mechanical properties are approximate and may vary based on the heat, welding parameters and other factors.    Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star Weldstar Dual Core HF600-G MIG Wire 1.2MM - 15KG

Weldstar Dual Core HF600-G MIG Wire 1.2MM - 15KG Features and Applications Seamless high fill copper coated tubular wire for semi-automatic applications. Ideal for hardfacing components subject to abrasion and moderate impact. Unique welder appeal. Deposition rate increased by up to 20% when compared to solid wire. Martensitic weld metal contains finely dispersed hard carbides ensuring an optimal balance between abrasion, friction and impact resistance. Abrasion resistance at service temperatures up to 450°C. Preheat will be determined by the application and whether micro cracking in the deposit is acceptable. According to the base material preheating in the range 150°C - 300°C may be necessary. Precision layer wound for superior wire feeding characteristics. Typically used on bucket teeth, bucket lips, bulldozer blades, crusher jaws, scraper blades, chutes, pump housings, conveyor screws, slide plates, gear teeth, crusher hammers, drilling bits, ploughshares, reamers etc. Test Certificates can be found online @wilkinsonstar247.com    Standards EN ISO 14700 - T Fe2   Chemical Composition % (Typical) C% Mn% Si% P% S% Cr%  Ni% 0.5 1.2 0.6 0.010 0.013 5.7 0.05               Mo% Cu% Fe% Co% V% W%   0.80 0.10 Bal 0.006 0.010 <0.09     Hardness (HRC) Current Type Hardness - First Layer Hardness - Third Layer DC+ 52-55 54-57 DC- 55-57 57-60 Peak hardness in the range 50-62 HRC could be achieved in three layers. Direct polarity negative reduces dilution and favours higher hardness. Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Wear Type Suitability   Welding Parameters Ømm Current (A) Voltage (V) 1.20 mm 110-300 16-32   Shielding Gases EN ISO 14175 - M12, M20, M21   Welding Positions EN ISO 6947 - PA, PB