Endurance Bulk Marathon Pack Feed Conduit Kit

Endurance Bulk Marathon Pack Feed Conduit Kit  Quick connect conduit to suit our decoiling Endurance Pac dome. High wear resistance with low coefficient of friction at the same time. Excellent durability even under extreme conditions. Suitable for unalloyed, low alloyed and high alloy wires.   This set includes: 1 x conduit with quick connect fittings. 1 x wire feeder inlet guide 12mm with quick connect. 1 x dome base plate with quick connect.   DOME NOT INCLUDED

Weld Star Endurance Bulk Pack Wire Feed Conduit With Quick Release

Quick connect conduit to suit our decoiling Endurance Pac dome. High wear resistance with low coefficient of friction at the same time. Excellent durability even under extreme conditions. Suitable for unalloyed, low alloyed and high alloy wires.   This set includes: 1 x conduit with quick connect fittings. 1 x wire feeder inlet guide 12mm with quick connect. 1 x dome base plate with quick connect.   DOME NOT INCLUDED

Weldmig Aluminium MIG Wire ER5356 AlMg5 0.5KG Spool Gun Reel

Good For Welding Of the following Parent Metals: 5000 series alloys (AlMg) with Mg<4%, 6000 (AlMgSi) alloys when anodised. Cast alloys of AlSi -Mg type. In practice the most versatile & universally used filler metal Welding Process: MIG Shielding Gas: Argon Anodising Quality: Excellent Corrosion Resistance: Excellent (Very good in marine applications)

Weldmig Aluminium MIG Wire ER4043 AlSi5 0.5KG Spool Gun Reel

Good For Welding Of the following Parent Metals: AlMgSi (6000 series) alloys e.g. 6063, 6082 cast alloys of aluminium silicon type Welding Process: MIG Shielding Gas: Argon Anodising Quality: Poor Corrosion Resistance: Good (Depending on parent alloy)

Weld Star Gas Shielded Dual Core 71R Seamless Wire 1.2MM 16KG

Features and Applications Seamless rutile flux cored wire with rapidly solidifying slag. Excellent welding properties combined with extreme impact toughness down to -40ºC. The wire is all positional and runs with a very stable soft arc producing excellent weld bead finish with negligible spatter. Ideal for root welding on ceramic backing. Due to the seamless technology the typical diffusible hydrogen content is <3.0 ml 100 g. Test certificates supplied as 3.1 which is actual weld chemistry + mechanicals according EN 10204:2004. Precision layer wound for superior wire feeding characteristics. Typically used on steel structures, pipelines, shipbuilding, non-alloy and fine grain steels, pressure vessels, offshore, mechanical engineering, heavy transport and general fabrication etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Shipbuilding steelsStructural steelsBoiler steelsPipe steelsFine grain steelsSteel acc. API-standard A, B, D, AH 32 - EH 36S185 - S355P235GH - P355GHP235T1/T2 - P460NL2 L210 - L445MBS235 - S460QL1X42 - X60 * Illustrative, not exhaustive list   Standards EN ISO 17632-A - T 46 4 (2) P M21 (C1) 1 H5 AWS A5.20 - E71T-1M (C1) J H4   Chemical Composition % (Typical) C% Si% Mn% P% S% Cr% Ni% 0.03 0.41 1.29 0.012 0.006 0.030 0.013               Mo% Cu% Al% V% Ti% Nb%   0.004 0.145 0.002 0.020 0.044 0.012     Mechanical Properties (Typical) Shielding Gas M21   Tensile Strength 600 MPa   Yield Strength 530 MPa   Elongation 26%   Impact Strength 100 J 70 J Test Temperature -40ºC -20ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters Ømm Current (A) Voltage (V) 1.00 mm 140-230 19-25 1.20 mm 160-280 21-29 1.60 mm 190-350 23-32   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star SG3 G4Si1 MIG Wire 15KG - 300MM Plastic Reel

Features and Applications A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. The higher Si-Mn content increases the weld metal strength and leaves a good bead appearance. Designed for semi-automatic and full-automatic GMAW applications. Good mechanical properties at sub-zero temperatures down to -40ºC. Vacuum-sealed aluminium foil packaging to prevent moisture absorption. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 46 4 M21 4Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.95 1.70 <0.020 <0.020 <.025             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.050 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 570 MPa 590 MPa Yield Strength 460 MPa 490 MPa Elongation 30% 28% Impact Strength 58 J 88 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg D300 D300 D300 72 72 72

Wilkinson Star 250KG MIG Wire Bulk / Endurance / Marathon Pack Plastic Dome

Plastic decoiling dome to suit our Endurance Pac bulk drums. The base plate to attach the conduits are sold separately. These can be purchased as part of the conduit sets only

Weld Star Copper Free (CF2) Mild Steel SG2 (G3Si1) MIG Wire 15/18KG

Features and Applications A non-copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Environmentally friendly when compared against traditional copper wires offering less fume and smoke in the working environment. Advantages of a stable arc when working with increased welding speeds that achieves high quality welds with almost no spatter. Good mechanical properties at sub-zero temperatures down to -40ºC. Vacuum-sealed plastic bag packaging to prevent moisture absorption. Fitted with alignment hole clip to ensure smooth feeding. Precision layer wound for superior wire feeding characteristics. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 0.010             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 18 Kg 18 Kg BS300 BS300 BS300 72 56 56 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance

Weld Star Alloy 82 (NiCr-3) MIG Wire 15KG

Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Precision layer wound for superior wire feeding characteristics. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star Nickel Alloy 625 (NiCrMo-3) MIG Wire 15KG

Features and Applications High nickel alloy wire developed for welding and cladding nickel-based alloys such as 625 or similar material. Solid drawn in a very special way to obtain cleaner and higher quality welds with a bright seam and excellent ductility. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to pitting and stress corrosion. Recommended working temperature ranges from cryogenic to 540°C. Precision layer wound for superior wire feeding characteristics. Typically used in the chemical process industry, marine engineering, nuclear reactor components, aerospace and within pollution control equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Inconel 601, Incoloy 800, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6625 - NiCr22Mo9Nb AWS A5.14 - ER NiCrMo-3   Chemical Composition % C% Mn% Fe%  P% S% Si%  Cu% max max max max max max max 0.10 0.50 0.50 0.015 0.015 0.50 0.50               Ni%  Co% Al% Ti% Cr%  Nb+Ta% Mo% 60.00 max max max 20.00 3.15 8.00 min 1.0 0.40 0.40 23.00 4.15 10.00   Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength ≥415 MPa   Elongation ≥35%   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER2594 Super Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic wire for welding all grades of super duplex stainless steels. Provides matching chemistry and mechanical property characteristics to wrought super duplex alloys such as 2507 and Zeron 100. Excellent resistance to aggressive environments as well as to pitting and crevice corrosion in warm seawater applications. The presence of Cu and W provides superior resistance to sulphuric and hydrochloric acids when compared to similar alloys without these additions. Improved resistance over austenitic stainless to erosion corrosion and fatigue. Precision layer wound for superior wire feeding characteristics. Typically used in the oil and gas industries, seawater systems, petrochemical and pharmaceutical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32530, S32550, S32750, S32760, 1.4501** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G Z 25 9 4 N L W AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P% Ni%    <0.03 <1.00 <1.00 <0.020 <0.035 9.28                 Cr% Mo% Cu% N% W%     25.12 3.60 0.59 0.22 0.62       Mechanical Properties Tensile Strength ≥750 MPa   Yield Strength ≥550 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG   Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER2209 Duplex Stainless Steel MIG Wire 15KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Precision layer wound for superior wire feeding characteristics. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF     Packaging Data Diameter Weight Spool Pallet Qty 0.80 mm 1.00 mm 1.20 mm 15 Kg 15 Kg 15 Kg BS300 BS300 BS300 72 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star ER347Si Stainless Steel MIG Wire 15KG

Stainless Steel Grade ER347Si: ER347Si is a type of stainless steel MIG wire that is specifically designed for welding and joining stainless steel components. It belongs to the austenitic family of stainless steels and offers excellent corrosion resistance, high strength, and good formability. MIG Welding: ER347Si wire is used in the MIG (Metal Inert Gas) welding process, also known as Gas Metal Arc Welding (GMAW). MIG welding utilizes a consumable wire electrode and an inert gas, such as argon or a mixture of argon and carbon dioxide, to shield the weld pool from atmospheric contamination. ER347Si MIG Wire: ER347Si MIG wire is formulated with a specific composition suitable for welding stainless steel grade 347 or similar materials. The "ER" prefix indicates that it is an electrode or rod used for welding, and the "Si" signifies the addition of silicon in its composition. Low Carbon Content: ER347Si MIG wire contains a low carbon content to minimize the risk of carbide precipitation and intergranular corrosion during welding. This makes it well-suited for applications where the welded joints will be exposed to corrosive environments. Silicon Addition: The inclusion of silicon in ER347Si wire improves the fluidity of the weld pool, facilitating good wetting and penetration during welding. It also contributes to stable arc characteristics and reduced spatter. Welding Applications: ER347Si MIG wire is commonly used for welding stainless steel components in various industries, including petrochemical, power generation, food processing, and automotive. It is suitable for joining stainless steel pipes, tanks, and equipment exposed to high temperatures and corrosive environments. Compatibility: ER347Si MIG wire is typically used with stainless steel grade 347 base metal or similar stabilized austenitic stainless steels. Grade 347 stainless steel offers improved resistance to intergranular corrosion and sensitization due to the addition of niobium (columbium). Shielding Gas: When using ER347Si MIG wire, a shielding gas containing argon or a mixture of argon and carbon dioxide is commonly used to protect the weld from oxidation and atmospheric contamination. Remember to follow the manufacturer's recommendations and welding procedures to ensure proper welding results and performance when using ER347Si stainless steel MIG wire.

Weld Star ER316Lsi Stainless Steel MIG Wire 15KG

Weld Star ER316Lsi Stainless Steel MIG Wire 15KG   Features & Benefits Stainless Steel Grade 316LSi: Grade 316LSi is a low-carbon variation of stainless steel grade 316. It is an austenitic stainless steel, which means it is non-magnetic and offers excellent corrosion resistance, high strength, and good formability. MIG Welding: MIG (Metal Inert Gas) welding, also known as Gas Metal Arc Welding (GMAW), is a popular welding process that uses a consumable wire electrode and an inert gas, typically argon or argon mixtures, to shield the weld pool from atmospheric contamination. 316LSi MIG Wire: 316LSi MIG wire is specifically designed for MIG welding applications that involve stainless steel grade 316 or similar materials. The "LSi" in its name stands for "low carbon, silicon added," indicating its composition and improved weldability. Low Carbon Content: The low carbon content in 316LSi MIG wire helps to minimize carbide precipitation during welding, which can lead to intergranular corrosion. This makes it suitable for applications where post-welding exposure to corrosive environments is a concern. Silicon Addition: The addition of silicon to the wire enhances the fluidity of the weld pool and promotes good wetting and penetration characteristics. It also contributes to improved arc stability and reduced spatter during welding. Welding Applications: Grade 316LSi MIG wire is commonly used for welding stainless steel components in various industries, including chemical processing, food and beverage, pharmaceuticals, marine applications, and architectural structures. It is suitable for joining stainless steel plates, sheets, pipes, and fittings. Compatibility: 316LSi MIG wire is typically used with the same grade of base metal, such as 316 stainless steel or similar austenitic stainless steels. It provides good corrosion resistance in a wide range of environments, including those with exposure to acids, chlorides, and marine conditions. Shielding Gas: When using 316LSi MIG wire, a shielding gas containing argon or a mixture of argon and carbon dioxide is commonly used to protect the weld from oxidation and atmospheric contamination. It's important to follow the manufacturer's guidelines and welding procedures when using stainless steel MIG wire grade 316LSi to ensure proper weld quality and performance.

Weld Star ER307Si Stainless Steel MIG Wire 15KG Reel

Features and Applications Austenitic stainless steel wire with a significant amount of manganese, making the all weld metal in most cases fully austenitic. High mechanical strength and excellent crack resistance. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for dissimilar welding between steel and stainless steel, armour plate and exhaust systems etc. Suitable for depositing stress relaxing buffer layers on crack sensitive base metals including hardfacing. Precision layer wound for superior wire feeding characteristics. Typically used on applications subject to atmospheric and corrosive media’s. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Armour plate, exhaust systems (type 409, 304), high Manganese austenitic steel, difficult to weld steels such as 42CrMo4, C45, 42MnV7, tool steels, 1.3401, X120Mn12 etc.* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 18 8 Mn AWS A5.9 - ER 307Si   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.045 6.06 0.82 0.005 0.029                   Ni% Cr% Mo% Cu%       8.02 18.35 0.05 0.030         Mechanical Properties Tensile Strength ≥500 MPa   Yield Strength ≥350 MPa   Elongation ≥25 %   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters - M12 Ømm Current (A) Voltage (V) 0.80 mm 40-120 15-20 1.00 mm 80-160 16-22 1.20 mm 100-210 17-23   Welding Parameters - M13 Ømm Current (A) Voltage (V) 0.80 mm 160-210 24-28 1.00 mm 180-280 25-30 1.20 mm 200-300 26-32   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.

Weld Star Aluminium ER4043 AlSi5 MIG Wire 2KG Reel

Aluminium ER4043 AlSi5 MIG Wire 2KG Reel 200MM Spool Diameter  Why use 4043 grade Aluminium wire?   General Purpose Welding: 4043 is often chosen as a general-purpose aluminum welding wire because it can be used for a wide range of aluminum alloys. It's suitable for welding 3003, 3004, 5052, 6061, and other common aluminum alloys. Good Fluidity: 4043 wire has good fluidity during welding, which means it flows smoothly and creates clean and aesthetically pleasing welds. Low Melting Point: It has a lower melting point compared to some other aluminum welding wires, making it suitable for thin aluminum materials and reducing the risk of burn-through. Low Hot Cracking Sensitivity: 4043 wire has relatively low hot cracking sensitivity, which means it is less likely to crack during the welding process, especially when used on aluminum alloys with a high thermal expansion coefficient. Corrosion Resistance: While not as corrosion-resistant as 5356 aluminum welding wire, 4043 still offers reasonable corrosion resistance, making it suitable for many applications. Heat-Treatable Alloys: It is commonly used for welding heat-treatable aluminum alloys because it minimizes the risk of affecting the heat treatment properties of the base metal. Marine and Automotive Applications: 4043 wire is often used in marine and automotive industries for tasks such as repairing aluminum boats or welding components in automotive applications.

Weld Star Weldstar ER80S-G Corten MIG Wire 15KG 300MM Reel

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Precision layer wound for superior wire feeding characteristics. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.         

Wilkinson Star Weld Star ER120S-G High Strength MIG Wire 15KG

Features and Applications A copper coated wire containing NiCrMo for welding ultra-high tensile strength steels. Designed for fine grain steels exceeding 890 MPa yield strengths. High impact strength at low temperatures with exceptional plasticity of the weld deposit. Precision layer wound for superior wire feeding characteristics. Typically used on lifting and handling machinery, bridges, tanks, transport, shipbuilding, railway, mines, cranes, frames, etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S890QL, S960Q ; P460NH, P460NL1 ; Weldox 900, Weldox 960, Strenx 960** Illustrative, not exhaustive list   Standards EN ISO 16834-A - G 89 4 M21 Mn4Ni2,5CrMo AWS A5.28 - ER 120S-G

Wilkinson Star Weld Star ER110S-G High Strength MIG Wire 15KG

Features and Applications A copper coated wire containing NiCrMo for single pass or multipass welding of low alloy steels. Designed for welding high yield strength steels with a minimum tensile strength of 770 MPa. Excellent impact strength at low temperatures down to -40°C. Ideal for steels requiring tough weld metal for critical applications. Precision layer wound for superior wire feeding characteristics. Typically used in the metal working industry, offshore fabrication, chemical & petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.    Typical Base Materials T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700 etc.** Illustrative, not exhaustive list

Wilkinson Star Weld Star ER80S-Ni1 Low Temp MIG Wire 15KG 300MM Reel

Features and Applications Copper coated, Ni-alloy (1,0% Ni), solid wire for low temperature, fine grained and austempering steels. Excellent impact toughness due to the addition of Nickel. Good mechanical properties at sub-zero temperatures down to -50°C. Especially suitable for use in the offshore industry. Precision layer wound for superior wire feeding characteristics. Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 3Ni1 AWS A5.28 - ER 80S-Ni1

Weldmig SG2 G3Si1 Mild Steel Welding Wire 5KG 200MM Reel

Weldmig ER70S-6 SG2 is a copper coated mild steel MIG welding wire on 5KG 200MM plastic reels   

BÖHLER Bohler Thermanit GE316L Stainless Steel MIG Wire 15KG 300MM Metal Reel

Bohler Thermanit GE316L Stainless Steel MIG Wire 15KG 300MM Metal Reel Böhler Thermanit GE316L is a premium-quality stainless steel solid MIG welding wire developed for welding and surfacing austenitic stainless steels such as 316, 316L and similar CrNiMo stainless steel grades. Manufactured to the highest standards by Böhler Welding, this low-carbon ER316LSi wire provides outstanding corrosion resistance, excellent weldability, and a smooth, stable arc for high-quality welds in demanding industrial applications. Featuring an increased silicon content (Si), Thermanit GE316L offers excellent wetting characteristics, reduced spatter, and a superior weld bead appearance, making it ideal for food processing equipment, pharmaceutical installations, chemical processing plant, marine fabrication, and architectural stainless steel applications. The low carbon composition helps minimise the risk of intergranular corrosion after welding, while maintaining excellent mechanical properties and resistance to temperatures up to 400°C. Supplied on a 15kg, 300mm metal reel, this wire is suitable for use with standard MIG/MAG welding equipment and is available in a range of wire diameters to suit a variety of fabrication requirements. Key Features: Premium Böhler Thermanit GE316L stainless steel MIG wire Low carbon ER316LSi composition for improved corrosion resistance Excellent arc stability with low spatter levels Increased silicon content for superior weld bead appearance Ideal for welding 316, 316L and similar CrNiMo stainless steels Suitable for joining and surfacing applications Excellent resistance to intergranular corrosion Maximum service temperature up to 400°C Supplied on a 15kg 300mm metal reel Manufactured to stringent Böhler Welding quality standards Specifications: Product: Böhler Thermanit GE316L Stainless Steel MIG Wire Wire Classification: ER316LSi Reel Weight: 15kg Reel Size: 300mm Metal Reel (D300) Wire Type: Solid Stainless Steel MIG Wire Applications: Food Processing, Chemical Plant, Marine, Pharmaceutical, Architectural Stainless Steel, Pressure Vessels and General Stainless Steel Fabrication Suitable Materials: 316, 316L and similar austenitic stainless steels Maximum Service Temperature: 400°C Characteristics and typical fields of application Solid wire of G 19 12 3 L Si / ER316LSi type for joining and surfacing application with matching and similar non-stabilized austenitic CrNi(N) and CrNiMo(N)-steels and cast steel grades. Corrosion resistance similar to matching low-carbon and stabilized austenitic 17Cr-12Ni-2Mo-steels and cast steel grades. The wire shows very good wetting and feeding characteristics, with excellent weld metal toughness down to –320°F. Application temperature max. 750°F. Classifications EN ISO 14343-A - G 19 12 3 L Si EN ISO 14343-B - SS316LSi AWS A5.9 -  ER316Si / ER316LSi   Available In:  0.8MM 1.0MM 1.2MM   15KG Metal Reels  

BÖHLER Bohler 1.2MM DiamondSpark 46 RC Flux Cored MIG Wire 16KG 300MM Metal Reel

DiamondSpark 46 RC Seamless cored wire Low hydrogen all-positional seamless rutile flux cored wire for welding carbon-manganese and fine grain steels using Argon-CO2 or pure CO2 shielding gas. DiamondSpark 46 RC is a seamless copper-coated rutile flux-cored wire, developed for modern shipyard requirements and daily construction challenges. The wire has excellent weldability, productivity for welding of low and medium alloyed steels using Argon-CO2 shielding gas or pure CO2. The weld deposit has excellent mechanical properties till -30°C in mix gas and till -20°C in pure CO2 shielding gas. DiamondSark 46 RC is approved with both shielding gases in the grade 3YSH5 and the hydrogen level guarantee is below 4 ml/100 g, tested at 27°C , 80%HR for 12 weeks without any increase.   Product Features: Seamless design Extremely clean manufacturing process Ultra-low-hydrogen weld metal Total resistance against moisture absorption during storage and use Optimal protection against hydrogen cracking No porosities observed Faster painting process Fast freezing rutile slag system Enhancing travel speed and arc stability in positional welding Productive positional welding Automatic slag detachability Wide parameter window More spray arc welding Easy arc setting Easy welding in overhead position Excellent feedability Low contact tip wear Trustable performance with long welding cable Less down-time for maintenance No wire breaks Stable arc Sharp arc Low spatter Good weldability Good wetting Less post-weld cleaning Very flat root pass No undercut Copper coated Excellent current transfer Rust resistance Easy handling Safer storage Designed chemistry Excellent CVN impact toughness down to –30°C mix gas and to -20°C in pure CO2 Highest welding performance in welding travel speed in particular in PF position Low fume emission Wide margin to cover both strength and CVN impact requirements Faster weld execution Healthy working place   Typical Applications: General construction Shipbuilding  

BÖHLER UTP AF Robotic 600 1.2mm Hardfacing Mig Wire 16kg

Bohler UTP AF ROBOTIC 600 is an example of an innovative, tailor-made product – developed to optimally fulfill requirements in the waste & recycling industry. It is a seamless, copper-coated, gas-shielded cored wire for the hardfacing of components subjected to extreme combinations of pressure, impact and abrasion wear, such as shredders. The wire can be used in all welding positions and has excellent characteristics for the robotic welding of new equipment, for example onto shredder teeth. It performs equally well in semi-automatic GMAW used for on-site-repair of worn components. When overlay welding onto S355 base material, a crack-free deposit with hardness of 55 HRC is already obtained in the first layer, increasing to a level of 57-62 HRC with the following layers. As such, the full weld overlay thickness will contribute to the wear resistance leading to a higher service life of the repaired components until next maintenance becomes necessary. With a record of hundreds of successful applications, UTP AF ROBOTIC 600 has proven to meet the growing demand within the recycling industry for efficient maintenance solutions to protect machinery against wear and prolong the life of shredder components. UTP AF ROBOTIC 600 Premium seamless gas-shielded cored wire for the hardfacing of shredders   Product Features:   Seamless copper-coated cored wire Excellent, smooth wire feeding Reduced contact tip wear Resistant to moisture and rust formation Controlled wire cast & helix Limited “dog tailing” at contact tip, promoting well positioned beads Wider window of applicable welding parameters than solid wire Significantly higher deposition rates and Welding productivity Easy setting of parameters Allows calm, spatter-free spray arc welding Weldable in all welding positions One wire for all hardfacing jobs, regardless position Available in drums with high filling content Less downtime for spool exchange Total product performance from above features Dependable and productive welding consumable for automated / robotic welding

Weld Star HF600 Solid Hard Facing MIG Wire 15kg 300MM Metal Reel

Features and Applications Copper coated high alloy solid wire for hardfacing and overlay of all C-Mn steels. This alloy deposits a martensitic structured weld metal with a hardness of about 54-60 HRC. Excellent abrasion resistance to moderate impact and high toughness. The weld metal has a Cr-Si structure and if not tempered can only be machined by grinding. Mostly used with semiautomatic and automatic procedures. A buffer layer is essential with hard to weld steels. Precision layer wound for superior wire feeding characteristics. Typically used on excavators in the mining industry, cylinder crushers, pneumatic hammers, knives, cutting and cold working tools, crumbling jaws, anvils, caterpillars, screws, guide rollers, etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials X45CrSi9-3, 4Xr9Si2, X45CrSi8, HNV1, HNV2, SUH11, X45CrSi 9-3, 401 S45, SUH 1, STR 1, 40Ch9S2** Illustrative, not exhaustive list   Standards EN ISO 14700 - S Fe 8 DIN 8555 - MSG 6-GZ-60-GP   Chemical Composition % (Typical) C% Mn% Si% S%       0.46 <0.60 3.05 <0.030                     Cu% P% Ni% Cr%       <0.25 <0.040 <0.50 9.10         Mechanical Properties Hardness (HRC) - 54 - 60 Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF   Packaging Data Diameter Weight Spool Pallet Qty 1.00 mm 1.20 mm 15 Kg 15 Kg BS300 BS300 72 72 Liability: Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, this information is subject to change without notice and can be only considered as suitable for general guidance.  

Weld Star Mild Steel SG2 G3Si1 MIG Wire 250kg Marathon Bulk Pack

Features and Applications Bulk wire drum system that offers a high productivity solution for continuous high volume welding applications. A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels. Good mechanical properties at sub-zero temperatures down to -40ºC. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1 AWS A5.18 - ER 70S-6   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.07 0.85 1.45 <0.025 <0.025 <0.35             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 <0.15 <0.15 <0.020 <0.030 <0.15   Mechanical Properties (Typical) Shielding Gas C1 M21 Tensile Strength 540 MPa 580 MPa Yield Strength 440 MPa 460 MPa Elongation 30% 26% Impact Strength 70 J 90 J Test Temperature -30ºC -40ºC Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.    Welding Parameters Ømm Current (A) Voltage (V) 0.80 mm 60-180 18-22 1.00 mm 80-230 20-28  1.20 mm 120-350 26-34   Shielding Gases EN ISO 14175 - C1, M21   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

BÖHLER Bohler Mild Steel SG2 Migwire A18 ER70S-6 G3Si1 - 15KG Plastic Reel

Experience top-quality welding with our Premium Bohler QG 3 SG2 copper-coated solid MIG welding wire, designed for gas metal arc welding (GMAW). This wire is a go-to choice for professionals working in boiler and vessel fabrication. It's also perfectly suited for structural and engineering projects involving unalloyed and low-alloyed carbon-manganese steels, making it a versatile addition to your welding toolkit. Key Specifications: Complies with EN ISO 14341-A G 42 3 M21 3Si1 / G 42 3C1 3Si1 and AWS A5.18: ER70S-6 standards. Compatible with an Argon/CO2 gas mix or pure CO2 as the shielding gas, offering flexibility in various welding scenarios.

Weldmig 1.6mm SG2 Mild Steel Mig Wire 15KG