Weld Star Weldstar FN55 E NiFe-Cl MIG Wire 15KG

Features and Applications Ferro-nickel solid wire used for welding cast iron and ductile iron. Suitable for dissimilar joints between cast iron, mild steel, low alloy and stainless steels. Recommended for welding high sulphur, phosphorous or lubricant-contaminated castings. Precision layer wound for superior wire feeding characteristics. Typically used for a range of repair and fabrication applications, including rebuilding shafts, wheels, critical joints between steel and cast iron etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Grey cast iron, malleable, nodular** Illustrative, not exhaustive list   Standards EN ISO 1071 - SC NiFe-1 AWS A5.15 - E NiFe-CI   Chemical Composition % C% Mn% Si% P% S%     max max max max max     2.00 0.80 0.20 0.03 0.03                   Fe% Ni% Cu% Al%       rem. 54.00 max max         56.00 2.50 1.00         Mechanical Properties Tensile Strength 400 - 579 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - I1, Ar + 1-2% O2   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Wilkinson Star Weld Star ER80S-Ni1 Low Temp MIG Wire 15KG 300MM Reel

Features and Applications Copper coated, Ni-alloy (1,0% Ni), solid wire for low temperature, fine grained and austempering steels. Excellent impact toughness due to the addition of Nickel. Good mechanical properties at sub-zero temperatures down to -50°C. Especially suitable for use in the offshore industry. Precision layer wound for superior wire feeding characteristics. Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 3Ni1 AWS A5.28 - ER 80S-Ni1