Weld Star Weldstar ER308LSi Stainless Steel MIG Wire 15KG

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation. ER 308LSi is used to weld base metals of a similar chemical composition such as 304, 305 and 347 etc. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for applications requiring atmospheric corrosion resistance typically in urban and rural media’s. Good mechanical strength at sub-zero temperatures down to -196°C. Precision layer wound for superior wire feeding characteristics. Typically used on a wide range of applications including pipe work, plate fabrication and vessel production etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials W.Nr:   1.4306, 1.4301, 1.4541, 1.4550, 1.4311, 1.4546, 1.4312, 1.4300, 1.4312, 1.4371, 1.4541, 1.4543, 1.4550, 1.4452* DIN: X2CrNi 19 11 (TP), X4CrNi 18 10 (TP), X6CrNiTi 18 10 (TP), X6CrNiNb 18 10 (TP), X2CrNiN 18 10 (TP), X5CrNiNb 18 10, G-X10CrNi 18 8 (TP)* AISI: 202, 302, 304L, 304, 305, 321, 347, 304 LN, ASTM A320 Grade B8C/D, 302* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - G 19 9 LSi AWS A5.9 - ER 308LSi   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.023 1.86 0.89 0.001 0.025                   Ni% Cr% Mo% Cu%       9.30 19.68 0.027 0.041         Mechanical Properties Tensile Strength ≥510 MPa   Yield Strength ≥320 MPa   Elongation ≥25 %   Impact Strength ≥80 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Welding Parameters - M12 Ømm Current (A) Voltage (V) 0.80 mm 40-120 15-20 1.00 mm 80-160 16-22 1.20 mm 100-210 17-23   Welding Parameters - M13 Ømm Current (A) Voltage (V) 0.80 mm 160-210 24-28 1.00 mm 180-280 25-30 1.20 mm 200-300 26-32   Shielding Gases EN ISO 14175 - M12, M13   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF