Tecna 2KvA Handheld Spot Welder C/W Timer 230V

Hand Operated Spot Gun 2 kVA Key Features • Lightweight professional spot gun for car body repair • Synchronous built-in electronic timer with SCR from 2 to 65 cycles • Compensation circuit starts the timer only when there is a proper passage of current which enables to perform on oxidised sheets, on surfaces with paint residues or on black sheets • All transformer are coated with F class insulation material that does not dry out and become brittle • Tests are made using 4000V • Force adjustment with scale in daN • Additional arm couplings to provide larger opening between arms • Supplied complete with 125mm arms • Large choice of arms and electrodes

Tecna Auto Spotter C/W Puller 230V Kit

Tecna Auto Spotter Kit c/w Puller 240V  This multi purpose portable welder is mainly used in car body repair. It allows: Resistance welding of nails and washers for sheets straightening. Cuts the cost on body repairs, you do not need to remove interiors trims and fitments, double skin areas are easily repaired. Resistance welding of screws and rivets. Sheets localised heating

Tecna 6kVa Pneumatic Water-cooled Spot Welding Gun C/W Pulse

Tecna 6kVA Pneumatic Spot Welding Gun c/w Pulse (Water Cooled) The TECNA® 7913P Handheld Spot Welder is a lightweight, reliable and simple to operate unit for the smash repair and sheet metal fabrication industries. The TECNA® 7913 comes standard with a pulse function, timer: a compensation circuit starts the timer only when there is a proper range of current, which allows welding on oxidised sheets, or on materials with a painted surface. The 7913P is a two-phase, water cooled, handheld spot welder designed for heavy-duty body repairs and light production work. There are a variety of arms available for this unit, enabling a range of applications.  

Tecna 16Kva Column Spot Welder Pedal Operated

The TECNA TE101 is a microprocessor-based welding control.. The weld control is used to control the movement of the welder and the thyristor / silicon-controlled rectifier (SCR) that regulates the welding current. The working program followed by the TECNA TE101 is created through the 13 programming parameters available in the control. The TE 101 may be used for both manual and pneumatic-operated welders.   Features Synchronous thyristor drive with phase-shift control for welding current adjustment. Built in ammeter (RMS value), 2 selectable ranges (18-56 kA). Storing of 99 welding programs. Inputs for external selection of 31 programs or 15 programs with parity control. Welding times adjustment in half-periods. Pre-weld, slope and pulse functions. Welding current control limits. Error condition signaling output and function to stop welder operation. Single and repeat operating mode. WELD/NO WELD function. Welding current compensation function to assist welding of oxidised sheets and rods. Possibility to connect two independent start of cycle device using different welding programs. Auto retain disabling for manually actuated welders. First phase shift delay adjustment. It enables the machine line current best balance. Cos φ adjustment, allow to optimise current adjustment linearity. End of cycle output for automation applications. Thermostatic protection input. Self-adjustment to the mains frequency 50/60 Hz. Control of solenoid valve 24 Vdc 7,2 W max with short circuit protection. Optional insulated RS 232 interface. Allow the connection with a printer or a personal computer for production data recording.

Tecna Pneumatic Gyroscopic Water Cooled Spot Gun 6Kva

Pneumatic Gyroscopic Water Cooled Spot Gun - 6 kVA Key Features • Fully water cooled portable spot gun • For high operating rate works in car body repair and light production works in industry • Synchronous built-in electronic timer with SCR from 2 to 65 cycles • Compensation circuit starts the timer only when there is a proper passage of current which enables to perform on oxidised sheets, on surfaces with paint residues or on black sheets • Current control with phase shift adjustment to carry out difficult welds, on very thin thickness, on rods with reduced diameter, on stainless steel sheet and similar • Balanced construction for easy operation •Thread base for fixing on a bench • A built-in differential pressure switch operates the timer when the electrode force is correct • Additional arm couplings to provide larger opening between arms • All transformer are coated with F class insulation material. Insulation test performed at 4000V •To be used with arms items: 7512 - 7513 - 7514 - 7515 (on request)

Tecna 2.5Kva Handheld Spot Welder 230V C/W Timer & Pulse

Spot Welder 2.5Kva C/W Timer & Pulse 240V Features: Versatile portable spot welder for auto body repair shops and maintenance shops Synchronous built-in electronic timer with SCR from 2 to 65 cycles Compensation circuit starts the timer only when there is a proper passage of current which enables to perform on oxidised sheets, on surfaces with paint residues or on black sheets. Current control with phase shift adjustment to carry out difficult welds, on very thin thickness, on rods with reduced diameter, on stainless steel sheet and similar. All transformers are coated with F class insulation material. Test are made using 4000V. Force adjustment with scale in daN. Additional arm couplings to provide larger opening between arms. Supplied complete with 125mm arms. Large choice of arms and electrodes. Pulsation weld time control. Cos fi control 3.8M Mains Cable, 7401 Arms