Fein Power Tools Fein CG15-125BLP Premium 5" 125MM Angle Grinder With Low HAVS

Details Outstanding service life thanks to brushless FEIN PowerDrive motor with fully enclosed motor housing and motor electronics fitted separately. Optimum protection for the motor from aggressive ceramic and mineral dusts and therefore reduction in downtimes and maintenance costs. Comprehensive user protection provided by soft start, restart protection, blockage monitoring, electronic overload protection, speed preselection, kick-back monitoring, anti-vibration handle and brake. Optimum cooling and temperature monitoring. Eye for carabiner to secure the angle grinder and prevent it falling off when working at height. Weighs just 2.2 kg with an output power of 1050 W for an excellent power-to-weight ratio. Quick-clamping nut included in scope of supply for changing grinding materials in a matter of seconds and without the need for any tools. Fatigue-free working thanks to narrow grip dimensions, compact design and a well-balanced low weight. New anti-vibration handle improves the grip by up to 16% compared with standard handles. Any vibration is also minimised. Industrial cable H07, length 4m.

Milwaukee Dead Blow Shot Peen Hammer 907G

Precision balanced design and steel shot-filled head for optimised control. Durable metal faces preventing chipping on contact. Steel reinforced handle for higher durability. Over molded handle for more control and better grip. 450g or 907g.   907g: Length – 343mm Width – 95mm

Fein Power Tools Fein CCG 18-125-15 AS Cordless 5"(125MM) Angle Grinder

Cordless angle grinder, 125 mm in diameter Powerful cordless angle grinder with the same output as a corresponding corded 1500 W device, for effective dividing, grinding and deburring tasks.     Key features Powerful cordless angle grinder with brushless motor, which can handle very tough requirements and industrial applications, especially in combination with the ProCORE 18 V battery technology. Extensive user protection features include soft start, restart protection, kickback monitoring, electronic overload protection, fall monitoring and brake. It’s got the knack: manual speed settings via the intuitive control panel allow the speeds to be adapted perfectly to a large range of materials and grinding materials. Secure hold for all applications thanks to non-slip handle. Safety hood, which can be adjusted without the use of tools, and quick-clamping nuts make for short setup times. Compatible with all 18 V AMPShare ProCORE batteries and chargers for even more power and flexibility. Also suitable for 18 V Bosch Professional cordless devices. COOLPACK 2.0 technology delivers a 135% longer battery life and therefore makes longer operating times possible. State-of-the-art cell technology and intelligent battery management deliver 87% more power than with conventional batteries. ProCORE Li-Ion battery with high-power cells, charge status indicator and “Electronic Cell Protection” (ECP). ECP protects against overload, overheating and total discharge. Ideally equipped for every form of use. Mobile working with the L-BOXX system.

Fein Power Tools Fein WSG 7-115 4-1/2" 700W Compact Angle Grinder - 230V

Details Perfect ergonomics thanks to lateral slide switch and small grip dimension. Fatigue-free working thanks to low weight. Solid metal gearbox head can be turned in 90° steps for maximum robustness and service life and very good access to difficult-to-reach spots. Enhanced safety through integrated restart protection.

GemRed Digital Angle Finder 200MM 8"

GemRed Digital Angle Finder 200MM Key Features Measures both the angle and length, metric and imperial scales Calculates angles quickly and accurately, clear digital display Easy operation with just two operating buttons Locking function to transfer angles easily and accurately Corrosion resistant stainless steel rules for durability

Rotabroach Cutting Fluid 1Ltr

Rotabroach Cutting Oil 1Ltr Elevate your cutting performance with Rotabroach Cutting Oil, designed to reduce tool wear and extend the life of your tools. Its advanced cooling properties effectively dissipate heat, preventing overheating and ensuring your tools last longer. Spend less time on tool replacements and more time on your projects. Key Features: Optimized Cutting Efficiency: RD208 cutting oil enhances cutting performance by reducing friction and heat, resulting in smoother and more accurate cuts. Exceptional Lubrication: This cutting fluid provides outstanding lubrication, enabling cutting tools to glide seamlessly through a variety of materials. Extended Tool Lifespan: By minimizing tool wear and efficiently dissipating heat, RD208 cutting oil prolongs the life of your cutting tools, reducing downtime and the need for replacements. Versatile Use: Ideal for a broad range of materials including steel, stainless steel, aluminum, and more, making it perfect for diverse drilling and cutting tasks. Cleaner Workspace: The specialized formula of RD208 cutting oil effectively flushes away chips and debris, maintaining a cleaner work environment and ensuring uninterrupted operation. User-Friendly Application: Packaged for convenience, the cutting oil comes with an applicator for precise and easy application, minimizing waste and mess. Flexible Application Methods: Suitable for direct application to the cutting area, or with a spray bottle or lubrication system, providing versatility in how it's used

Rotabroach Element 100 Mag Drill Cutter

Rotabroach Element 100 Magnetic Drill Powerful 2000w motor with a four-speed mechanical gearbox. Rotabroach’s largest machine (733mm), the Element 100 is the ultimate heavy-duty drilling solution. Suitable for drilling up to 100mm diameter by 100mm depth. CutSmart Technology – designed to protect your motor and cutter, prolonging tool life. Quick release interchangeable handle – allowing you to operate the mag drill from either side and improving accessibility. Internal cabling reduces the risk of damage and downtime for your magdrill. Internal cooling – keeping your mag drill cool and allowing you to drill for longer. Twist drill, threading and countersinking capabilities. Dual motor protection, minimising wear and downtime of this magdrill.   **Please note this item does NOT come with the swivel base, for the swivel base option please see separate option** 

Milwaukee M18FPD3-502X 18V Combi Drill Package C/W 2 x 5AH Batteries

Milwaukee M18FPD3-502X 18V Combi Drill Package C/W 2 x 5AH Batteries, Charger & Case    Higher power efficiency under load with outstanding torque of 158N Extremely compact design of 175 mm length for access into tight spaces AUTOSTOP control mode offers enhanced safety for the operator by preventing over-rotation in a bind-up 13 mm metal chuck for quick bit changes and bit retention Fastest drilling and driving applications under load Brighter LED workspace illumination Fuel gauge displays remaining charge All metal reversible belt clip to hang your tool quickly and easily Individual battery cell monitoring optimises tool run time and ensures long term pack durability  

Rotabroach Element 100 Mag Drill Cutter With Swivel Base

Rotabroach Element 100 Magnetic Drill Powerful 2000w motor with a four-speed mechanical gearbox. Rotabroach’s largest machine (733mm), the Element 100 is the ultimate heavy-duty drilling solution. Suitable for drilling up to 100mm diameter by 100mm depth. CutSmart Technology – designed to protect your motor and cutter, prolonging tool life. Quick release interchangeable handle – allowing you to operate the mag drill from either side and improving accessibility. Internal cabling reduces the risk of damage and downtime for your magdrill. Internal cooling – keeping your mag drill cool and allowing you to drill for longer. Features a swivel base Twist drill, threading and countersinking capabilities. Dual motor protection, minimising wear and downtime of this magdrill.

Rotabroach Element 75 Magnetic Drill Cutter

ELEMENT 75 Powerful 1800w motor with a two speed mechanical gearbox. 23.5kg: Lighter and more compact than other heavy-duty drills. Suitable for drilling up to 75mm diameter by 75mm depth. CutSmart Technology – designed to protect your motor and cutter, prolonging tool life. Quick release interchangeable handle – allowing you to operate the mag drill from either side and improving accessibility. Internal cabling reduces the risk of damage and downtime for your magdrill. Internal cooling – keeping your mag drill cool and allowing you to drill for longer. Features a swivel base. Twist drill, threading and countersinking capabilities. Dual motor protection, minimising wear and downtime of this magdrill

Rotabroach Element 50 Magnetic Drill Cutter

Rotabroach Element 50 Magnetic Drill Cutter Powerful 1500W motor featuring a two-speed gearbox. 15kg in total weight. Suitable for drilling up to 5omm diameter by 50mm depth. CutSmart Technology – designed to protect your motor and cutter, prolonging tool life. Quick release interchangeable handle – allowing you to operate the mag drill from either side and improving accessibility. Internal cabling reduces the risk of damage and downtime for your mag drill. Internal cooling – keeping your mag drill cool and allowing you to drill for longer. Reversible features to allow tapping, 13mm chuck also allows twist drilling. Can be used to countersink up to 30mm. Dual motor protection system to prolong the machine’s life and prevent unwanted wear

Rotabroach Element 50 Automatic Mag Drill

ELEMENT 50 AUTOMATIC MAG DRILL Powerful 1500w motor with a two-speed mechanical gearbox. Fully automatic drilling. The machine drills the hole, retracts and powers off – ready to be moved safely on to the next hole. Suitable for drilling up to 40mm diameter by 50mm depth. CutSmart Technology – designed to protect your motor and cutter, prolonging tool life. Quick release interchangeable handle – allowing you to operate the mag drill from either side and improving accessibility. Internal cabling reduces the risk of damage and downtime for your mag drill. Internal cooling – keeping your mag drill cool and allowing you to drill for longer. At just 514mm, this magnetic drill can perform in difficult environments. 50mm max cutter diameter. Dual motor protection system to prolong the machine’s life and prevent unwanted wear.

Fisher Stainless Steel Rule Metric/Imperial

Fisher Stainless Steel Rule – Metric/Imperial The Fisher Stainless Steel Rule – Metric/Imperial is a durable, precision-engineered measuring tool designed for professional tradespeople, fabricators, engineers, and workshop environments. Manufactured from high-quality hardened stainless steel, this rule provides accurate measurements with clearly etched metric and imperial graduations, ensuring reliable performance for a wide range of marking out and measuring tasks. The corrosion-resistant stainless steel construction offers excellent durability, while the permanently etched graduations remain easy to read even after prolonged use. Ideal for welding, fabrication, machining, woodworking, engineering, and general workshop applications, the Fisher Stainless Steel Rule is an essential addition to any toolbox. Key Features Premium hardened stainless steel construction. Dual metric and imperial graduations. Precision etched markings for long-lasting readability. Corrosion and wear resistant. Straight edge ideal for measuring and marking out. Suitable for workshop, engineering, fabrication, and site use. Lightweight, durable, and easy to store. Applications Metal fabrication Welding and engineering Machining Construction Woodworking General workshop use Measuring and marking out Specifications Brand: Fisher Material: Hardened Stainless Steel Measurement Scale: Metric & Imperial Graduations: Permanently etched for accuracy Finish: Corrosion-resistant stainless steel Application: Precision measuring and marking Whether you're measuring material for fabrication, checking dimensions in the workshop, or marking out components with precision, the Fisher Stainless Steel Rule – Metric/Imperial delivers the accuracy, durability, and reliability that professionals depend on every day.    

Milwaukee M18FPD3-0 Gen 4 Combi Drill Bare Unit

Milwaukee M18FPD3-0 Gen 4 Combi Drill  M18FPD3: 13mm Chuck Max Drilling Masonry - 16mm Max Drilling Steel - 16mm Max Drilling Wood - 89mm Max Percussion Rate - 0-33,000 BPM Max Torque - 158 NM No Load Speed Gear 1 - 0-500RPM No Load Speed Gear 2 - 0-2100RPM   Higher power efficiency under load with outstanding torque of 158 Nm Extremely compact design of 175 mm length for access into tight spaces AUTOSTOP™ control mode offers enhanced safety for the operator by preventing over-rotation in a bind-up 13 mm metal chuck for quick bit changes and bit retention Fastest drilling and driving applications under load Brighter LED workspace illumination Fuel gauge displays remaining charge All metal reversible belt clip to hang your tool quickly and easily Individual battery cell monitoring optimises tool run time and ensures long term pack durability

Rotabroach Commando 35 Mag Drill

Commando 35 The Commando 35 has a powerful 1050W motor. Fitted with thermal overload protection. Suitable for drilling up to 35mm diameter by 50mm depth. Perfect for both on-site and workshop drilling.  

Bessey Tools Bessey High Performance All Steel Screw Clamp

Bessey High Performance All Steel Screw Clamp Increasingly high clamping pressures, with larger throat depths and wider openings. Clamping force up to 12,000N with a tightening torque of 40Nm, These are the demands that original BESSEY high-performance clamps need to fulfil on a daily basis.     Used in general fabrication, steel and boiler construction, shipbuilding and automotive engineering. Also in heavy timber construction, laminated wood beam construction and carpentry. In other words, wherever sturdy or heavy parts need to be clamped very securely, with a very high clamping pressure. Developed on the basis of the tried-and-tested BESSEY all-steel screw clamp, the original BESSEY high-performance clamps fulfil all requirements with panache... again and again! The high-performance clamp. Your benefits at a glance: Extremely sturdy. Fixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Special tilting pressure plate.The heat-resistant pressure plate is replaceable and can be tilted up to 35° so it can even clamp on angled or sloping surfaces. Tempered spindle.The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability. Sturdy tommy bar.The sturdy tommy bar has special rounded hand-friendly ends, as well as a hexagonal bolt. This allows powerful, controlled clamping.  

Milwaukee 18V Fuel Packout 7Ltr Wet & Dry Vac Body Only

Milwaukee 18V Fuel Packout 7Ltr Wet & Dry Vac Body Only   The M18 FUEL™ PACKOUT™ wet/ dry vacuum is fully compatible with the MILWAUKEE® PACKOUT™ Modular Storage System. POWERSTATE™ brushless motor delivers powerful performance to easily clean up common wet and dry jobsite debris. PACKOUT™ compatibility gives this cordless wet/ dry vac outstanding mobility, saving the time spent hauling tools on and off the jobsite. Usable on and off the PACKOUT™ stack makes this wet/ dry cleanup solution most portable and versatile. The highly efficient HEPA filter collects 99.97 % of airborne particles down to 0.3 microns. Delivers up to 30 minutes of run time on a HIGH OUTPUT™ 8.0 Ah battery pack in high mode and over 50 minutes in low mode. Internal accessory and hose storage allows all attachments to be carried with the tool avoiding loss of equipment. The DEK 26 power tool connector allows for efficient dust extraction from power tools. Extendable hose up to 1.6 m for extended reach and versatility. Flexible battery system: works with all MILWAUKEE® M18™ batteries.   Specification: Voltage: 18V Battery type: Li-ion Capacity liquids: 7.0 L Dimensions: 430 x 280 x 330 mm Dust class: L Hose diameter: 41 mm Hose length: 1.5 m Max. vacuum: 117 mbar Weight: 5.6 kg Body only – not supplied with batteries or charger.

Milwaukee 18V Fuel 165MM Circular Saw

Features: Milwaukee® designed and built brushless POWERSTATE™ motor for up to 3x longer motor life and up to 2x more cuts per charge Integrated battery fuel gauge & LED light Flexible battery system: works with all Milwaukee® M18™ batteries REDLINK PLUS™ intelligence system delivers the most advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load Individual battery cell monitoring optimises tool run time and ensures long term pack durability 50° bevel capacity Magnesium upper and lower guards provide best in class durability for impact resistance Magnesium shoe reduces weight and maximises durability Integrated dust blower keeps cut line clear Hang hook allows safe storage of the tool Please note: This is a bodyonly item and does not include a battery or charger.   Comes with: Saw blade   Specification: Blade diameter (mm): 165 Bore size (mm): 15.87 Max. cutting depth 45° (mm): 41 Max. cutting depth 90° (mm): 55 No load speed (rpm): 5000 Sound power level (dB(A)): 91.8 Sound power level uncertainty (dB(A)): 3 Sound pressure level (dB(A)): 80.8 Sound pressure level uncertainty (dB(A)): 3 Vibration level (m/s²): 2.45 Vibration uncertainty (m/s²): 1.5 Voltage (V): 18

Milwaukee 18V Fuel 3/4" Impact Wrench Kit With Friction Ring

The Milwaukee M18ONEFHIWF34-502X bundle includes the Milwaukee impact wrench, x2 5Ah batteries, charger and case. The impact wrench is ideal to use in tight spaces with its compact design being only 213mm. The impact wrench delivers 1626Nm of fastening torque and has 4-mode drive control which gives the user the option to change into four different speed and torque settings. Mode 4 is ideal to use for bolt removal as it has a maximum nut-busting torque of 2033Nm which shifts to 750 rpm giving you unmatched control when removing fasteners. The M12-18FC rapid fast charger is ideal for charging your Milwaukee batteries from M12, M14 and M18 quickly. The charger can charge 2.0Ah, 4.0Ah, 5.0ah, 6.0Ah and 9.0Ah battery pack and can charge M18 and M12 at the same time. This Milwaukee M18CASEPP case is the perfect case to keep your Milwaukee M18FPD & M18FID or M18ONEPD-0 & M18ONEID-0 safe and protected from dust, debris and the elements. The Milwaukee 5.0Ah Red Lithium-Ion Battery has REDLITHIUM-ION™ sophisticated electronics (REDLINK™ Intelligence) and overload protection which stops the user from causing damage to their cordless power tools. The batteries also feature a temperature Management System which keeps the battery at the ideal temperature alongside individual cell monitoring which helps to provide maximum battery life whilst also preventing cell damage. The remaining charge of the battery can be seen on the fuel gauge.  Features and Benefits:3/4" friction ring receptionMode 4 bolt removal, provides a maximum nut-busting torque of 1898 Nm then shifts to 750 rpm for unmatched control when removing fastenersThe integrated blow counting sensor enhances the consistent repeatability of the chosen torque settingONE-KEY tool control enables wireless tool customisation for increased productivity and consistent resultsONE-KEY tool tracking & security offers a Cloud-based inventory management platform that supports both location tracking and theft preventionTechnical Specifications:No load speed (rpm) 0 - 1850 / 0 - 2400Tool reception 3/4" squareMax. fastening torque [Nm] 1626Nut busting torque [Nm] 2033Fastening torque [Nm] 1626Weight with battery pack (kg) 3.3 (batteries not supplied)Supplied With x1 Impact Wrenchx2 5Ah Batteriesx1 Chargerx1 Case

Milwaukee M12 6AH Battery

Features: Delivers up to 3x more run time, up to 20% more power and up to 2x more battery life compared with other Lithium-Ion technologies and/or with previous Milwaukee® battery technology (Results depend on tool and application) REDLITHIUM-ION™ protection with Milwaukee® REDLINK™ digital overload protection to prevent users from damaging their cordless power tool investment in abusive situations Individual cell monitoring ensures optimal charge and discharge for maximum life Integrated welded frame battery construction with shock responsive separators preventing pack failure from excessive vibrations or drops Can be used in extreme temperatures down to -20 °C without compromising on runtime and battery life Discharge protection prevents cell damage from over-discharge

The Works Pre-Weld Max Anti Spatter Spray

The Works Pre-Weld Max Anti Spatter Spray Suitable for all types of welding, simply by spraying a light film of 'The Works' on material prior to tacking or welding gives clean welding conditions, prevents spatter adhesion, porosity and greatly reduces dressing time. It contains a corrosion inhibitor, creates better welds and reduces heat discolouration. There are no propellants involved, 100% product expelled using this unique spraying system that works at 360° with no wastage.

Milwaukee M12 4AH Battery

Features: Delivers up to 2x more run time, up to 20% more power and up to 2x more battery life compared with other Lithium-Ion technologies and/or with previous Milwaukee® battery technology (results depend on tool and application) REDLITHIUM-ION™ protection with Milwaukee® REDLINK™ digital overload protection to prevent users from damaging their cordless power tool investment in abusive situations Individual cell monitoring ensures optimal charge and discharge for maximum life Integrated welded frame battery construction with shock responsive separators preventing pack failure from excessive vibrations or drops Can be used in extreme temperatures down to -20 °C without compromising on runtime and battery life Discharge protection prevents cell damage from over-discharge

Milwaukee 18V 5AH Battery

Features: Delivers up to 2.5x more run time, up to 20% more power and up to 2x more battery life compared with other Lithium-Ion technologies and/or with previous Milwaukee® battery technology (results depend on tool and application) REDLITHIUM-ION protection with Milwaukee® REDLINK™ digital overload protection to prevent users from damaging their cordless power tool investment in abusive situations Individual cell monitoring ensures optimal charge and discharge for maximum life Durable metal frame battery construction with shock responsive separators preventing pack failure from excessive vibrations or drops Water protection routes water away from the electronics & out of the battery pack Can be used in extreme temperatures down to -20 °C without compromising on runtime and battery life On-board battery fuel gauge helps the user to maximize his battery run-time efficiency Specification: Voltage (V) 18 Battery pack capacity (Ah) 5.0  

FIXT Copper Anti Seize Spray 400ML

Comes in 400ml Aerosol Thick, protective lubricant for metal parts Eliminates corrosion, seizure & brake squeal Effective at temperatures up to 1100˚C High-grip, anti-fling product, will not wash off

FIXT Wire Rope & Chain Lube Spray 400ML

FIXT Wire Rope & Chain Lube Spray – 400ml High-Performance Lubrication & Corrosion Protection for Chains, Cables & Wire Ropes The Force Wire Rope & Chain Lube Spray (400ml) is a specially formulated lubricant designed to penetrate deep into wire ropes, chains, and moving metal assemblies, delivering long-lasting lubrication and superior corrosion protection. This heavy-duty formula resists water washout and sling-off, making it suitable for demanding environments such as construction, marine, industrial, and agricultural settings. Its high tack and anti-wear properties help reduce friction and wear, extend component life, and maintain equipment reliability in high-load or exposed applications. Key Features: Deep-penetrating formula reaches internal cable strands and chain links Forms a durable lubricating film that resists wash-off and fling Provides long-lasting protection against rust, corrosion, and oxidation Ideal for harsh outdoor and marine environments Reduces wear and friction, extending component life Suitable for overhead lifting gear, cranes, forklifts, conveyors, and winches Typical Applications: Wire ropes and lifting cables Chains, sprockets, and gear assemblies Pulley systems and hoists Winches, cranes, and marine rigging Agricultural and industrial machinery Usage Instructions: Shake the can thoroughly before use. Apply liberally to clean, dry surfaces from 15–25cm. Allow the lubricant to penetrate and set for a few minutes. Reapply as needed, particularly in high-wear or exposed environments. Note: Always use in a well-ventilated area. Avoid contact with brake components or surfaces to be painted or coated.

FIXT Brake & Parts Cleaner 400ML

FIXT Brake & Parts Cleaner – 400ml Aerosol Fast-Drying, High-Performance Degreaser for Automotive & Industrial Use The FIXT Brake & Parts Cleaner (400ml) is a professional-grade, fast-evaporating solvent cleaner specially formulated for the removal of oil, grease, brake fluid, and other contaminants from brake components, clutches, and metal parts. Designed to improve performance and safety, this cleaner helps reduce brake squeal, improve component function, and ensure contaminant-free surfaces during assembly and maintenance. Its powerful, residue-free formula penetrates quickly and evaporates rapidly, leaving parts clean and dry without rinsing. Ideal for automotive workshops, industrial environments, and general maintenance. Key Features: Fast-Drying Formula – Leaves no residue Powerful Cleaning Action – Removes brake dust, grease, oil, and dirt Safe for Metal Components – Won’t damage sensitive parts Improves Brake Performance – Helps reduce squeal and vibration Convenient 400ml Aerosol – Easy application with precision spray nozzle Applications: Brake calipers and drums Clutch components Engine and transmission parts Industrial machinery and tooling General degreasing before reassembly Usage Instructions: Shake can well before use. Spray directly onto the surface from 15–30cm. Allow dirt and residue to run off. Wipe with a clean cloth if necessary. Allow to dry fully before reassembling or applying new lubricants. Note:   Not suitable for use on rubber, plastic, or painted surfaces unless compatibility has been tested.

FIXT Battery Terminal Protector 400ML

Comes in a 400ml Aerosol Provides effective protection of battery & electrical terminals Repels moisture & maintains best possible contact Protects against corrosion, acid & general weathering effects Ensures best possible connections

Milwaukee 18V Grease Gun Bare Unit

Powerful 18V motor delivers over 562 bar max. operating pressure   REDLINK™ overload protection electronics in tool and battery pack deliver best in class system durability   Best in class run time - dispenses up to 7 cartridges per charge   Superior handle balance and ergonomics - only 355 mm long and 3.9 kg   Air bleeder valve - priming mechanism for quick flow   Integrated hose storage, shoulder strap loop & LED fuel gauge - added user convenience and less down time   Three way loading - bulk, cartridge and suction capable   Grease capacity 400 ml cartridge, 473 ml bulk   Individual battery cell monitoring optimises tool run time and ensures long term pack durability   REDLITHIUM™-ION battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life   Flexible battery system: works with all MILWAUKEE® M18™ batteries   Supplied with 1219 mm high pressure flex hose with spring guard