Fein Power Tools Fein CG15-125BLP Premium 5" 125MM Angle Grinder With Low HAVS

Details Outstanding service life thanks to brushless FEIN PowerDrive motor with fully enclosed motor housing and motor electronics fitted separately. Optimum protection for the motor from aggressive ceramic and mineral dusts and therefore reduction in downtimes and maintenance costs. Comprehensive user protection provided by soft start, restart protection, blockage monitoring, electronic overload protection, speed preselection, kick-back monitoring, anti-vibration handle and brake. Optimum cooling and temperature monitoring. Eye for carabiner to secure the angle grinder and prevent it falling off when working at height. Weighs just 2.2 kg with an output power of 1050 W for an excellent power-to-weight ratio. Quick-clamping nut included in scope of supply for changing grinding materials in a matter of seconds and without the need for any tools. Fatigue-free working thanks to narrow grip dimensions, compact design and a well-balanced low weight. New anti-vibration handle improves the grip by up to 16% compared with standard handles. Any vibration is also minimised. Industrial cable H07, length 4m.

Fein Power Tools Fein CCG 18-125-15 AS Cordless 5"(125MM) Angle Grinder

Cordless angle grinder, 125 mm in diameter Powerful cordless angle grinder with the same output as a corresponding corded 1500 W device, for effective dividing, grinding and deburring tasks.     Key features Powerful cordless angle grinder with brushless motor, which can handle very tough requirements and industrial applications, especially in combination with the ProCORE 18 V battery technology. Extensive user protection features include soft start, restart protection, kickback monitoring, electronic overload protection, fall monitoring and brake. It’s got the knack: manual speed settings via the intuitive control panel allow the speeds to be adapted perfectly to a large range of materials and grinding materials. Secure hold for all applications thanks to non-slip handle. Safety hood, which can be adjusted without the use of tools, and quick-clamping nuts make for short setup times. Compatible with all 18 V AMPShare ProCORE batteries and chargers for even more power and flexibility. Also suitable for 18 V Bosch Professional cordless devices. COOLPACK 2.0 technology delivers a 135% longer battery life and therefore makes longer operating times possible. State-of-the-art cell technology and intelligent battery management deliver 87% more power than with conventional batteries. ProCORE Li-Ion battery with high-power cells, charge status indicator and “Electronic Cell Protection” (ECP). ECP protects against overload, overheating and total discharge. Ideally equipped for every form of use. Mobile working with the L-BOXX system.

Bessey Tools Bessey Welders Angle Mitre Clamp 120MM x 2 Box Section Max Input

Bessey Welders angle clamps WSM12 Automatic adjustment to workpieces of various thicknessesSturdy jaws and base plate made from high-quality cast ironThe copper-plated spindle prevents welding splatter from stickingPrecise 90 degrees -angles   Specs Weight (kg) 7.80 Current passage max. (mm) 100 Jaw height (mm) 61 Jaw length (mm) 120 Opening min/max (mm) 2 x 120

Bessey Tools Bessey SLV Long Bar Clamps - Pack Of 2

Clamp Features: • Clamping force upto 6,500N • Heads can clamp and be reversed for spreading • Each clamp supplied with 2 clamping heads. Additional heads can be added to the bar if required • Tiltable replaceable pad pivots to 35 degrees

Bessey Tools Bessey Welders Angle Clamp 90MM x 2 Capacity

Bessey WSM-9 Welder’s Angle Clamp – 90° Precision Clamping for Welding & Fabrication Accurate and Secure Corner Clamping for Right-Angle Joints The Bessey WSM-9 Welder’s Angle Clamp is specifically designed to deliver fast, precise, and repeatable 90° clamping for a wide range of welding and fabrication applications. Engineered with professional welders and metalworkers in mind, this heavy-duty clamp allows for accurate alignment of materials at right angles, while keeping workpieces clear for welding thanks to its open corner design. Ideal for T-joints, miter joints, and box frame assemblies, the WSM-9 is a reliable and rugged workholding solution that increases efficiency, improves weld quality, and enhances repeatability during fabrication. Key Features: Precise 90° Clamping Perfect for creating square corners and right-angled joints with high accuracy in steel fabrication and welding setups. Open Corner Design Provides unobstructed access to the joint for tack or full welding without removing the clamp—ideal for efficiency and clean weld seams. Independently Adjustable Spindles Each clamping arm has its own spindle, allowing for secure clamping of different material thicknesses on both sides of the corner. Heavy-Duty Construction Made from durable cast iron and steel components, ensuring long service life in tough industrial environments. Self-Centering Action Automatically aligns workpieces with symmetrical clamping force, reducing the need for time-consuming setup adjustments. Technical Specifications: Clamping Angle: 90° Clamping Capacity: Up to 100mm (3.94”) Throat Depth: 75mm Material Compatibility: Round, square, or flat stock Spindles: Two independently adjustable screw spindles Material: Cast iron frame with precision steel spindles Weight: Approx. 4.5 kg Applications: Welding and metal fabrication Frame construction and square assembly Fixture building and structural alignment Suitable for steel, stainless, and aluminium components Perfect for workshops, maintenance teams, and production environments Why Choose the Bessey WSM-9 Angle Clamp? When precision and access matter, the WSM-9 is a game-changer. Designed to keep corners square while offering open access for welding, this clamp saves time, reduces material movement, and improves finished results. Whether you're working on frames, boxes, or structural components, the Bessey WSM-9 delivers strength, control, and accuracy every time.

Bessey Tools Bessey All Steel GS Classix Screw F Clamp

Bessey GS Classix All Steel Screw F Clamp Robust, Reliable Clamping Power for Everyday Workshop Use The Bessey GS Classix Screw F Clamp delivers dependable, high-strength clamping performance in a durable and ergonomic design. Engineered for demanding fabrication, welding, woodworking, and general workshop applications, this versatile clamp is constructed from fully tempered steel, providing excellent resilience, wear resistance, and long-lasting service life. With a clamping force of up to 5000N, the GS Classix ensures secure, slip-free holding for a wide range of materials and projects. Its fixed jaw and sliding arm are built for precision and strength, while the tommy bar handle allows easy, controlled application of clamping pressure without excessive effort. Key Features: High Clamping Force – Up to 5000N Delivers strong, secure clamping pressure ideal for demanding fabrication or assembly tasks. All-Steel Construction Fixed jaw and sliding arm are made from fully tempered steel for maximum strength and long service life under heavy use. Durable Surface Finish Zinc-coated parts resist rust and wear, even in tough shop conditions. Tommy Bar Handle Classic sliding pin design offers simple and efficient torque transfer, even in tight spaces. Ribbed Profile Rail Provides enhanced stability and helps prevent slippage under pressure. Non-Slip Pressure Pad Swivelling pressure pad adjusts to uneven surfaces and materials, enhancing versatility and grip. Technical Specifications (Typical Range): Clamping Force: Up to 5000N Clamping Capacity: Various sizes available (e.g. 200mm, 300mm, 500mm etc.) Throat Depth: Typically 100mm Material: Tempered steel Handle Type: Tommy bar Rail Profile: Ribbed for extra grip and alignment Ideal For: Welding and fabrication setups Joinery and woodworking Assembly and maintenance tasks Metal and plastic work Workshop and industrial use Why Choose the Bessey GS Classix? Backed by Bessey’s reputation for German engineering and quality, the GS Classix series combines affordability with exceptional performance and durability. Whether you're clamping during tack welding, gluing in carpentry, or holding components in place during assembly, this clamp offers reliable grip, easy handling, and rugged construction—making it a staple tool for professionals and DIY users alike.

Bessey Tools Bessey CDFC Forged G Clamp

Clamp Features: Bessey C-clamp CDF403C 75/60 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF404C 105/85 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF406C 150/100 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF408C 205/125 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking Bessey C-clamp CDF410C 245/150 Clamping force up to 18,000 NDrop forged, extremely stableThe copper-plated spindle prevents welding splatter from sticking

Bessey Tools Bessey Clamp Quick Ratchet Lever Clamp

Bessey All Steel Lever Clamp Clamping with leverage Speed, safety and strength The original BESSEY lever clamps are lightweight, easy to handle, dimensionally stable, and torsion resistant. And the best thing is: they can clamp up to 5x faster than conventional clamps. This is because they use the natural force of the lever, meaning that with just a small amount of effort they can quickly produce large clamping pressures. This is particularly valuable in situations where many clamps have to be applied in a short time, with no risk of loosening due to vibrations. Try it out! The lever clamp GSH allows you to clamp up to 5 x faster than with conventional clamps. Rapid - Up to 5 x faster than conventional clampsSecure - Unaffected by vibrationsStrong - High clamping forceYour benefits at a glance: Secure ratchet mechanismThe ratchet mechanism ensures rapid, controlled, vibration free clamping. Hardened cam at the end of the lever ensures a long service life. Extremely sturdyFixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Forged sliding armThe sliding arm is serrated and made from tempered, drop-forged steel. For an extremely long service life. Ergonomically shaped clamping leverThe powder-coated clamping lever and the plastic-coated release lever are also remarkably ergonomic.

Bessey Tools Bessey High Performance All Steel Screw Clamp

Bessey High Performance All Steel Screw Clamp Increasingly high clamping pressures, with larger throat depths and wider openings. Clamping force up to 12,000N with a tightening torque of 40Nm, These are the demands that original BESSEY high-performance clamps need to fulfil on a daily basis.     Used in general fabrication, steel and boiler construction, shipbuilding and automotive engineering. Also in heavy timber construction, laminated wood beam construction and carpentry. In other words, wherever sturdy or heavy parts need to be clamped very securely, with a very high clamping pressure. Developed on the basis of the tried-and-tested BESSEY all-steel screw clamp, the original BESSEY high-performance clamps fulfil all requirements with panache... again and again! The high-performance clamp. Your benefits at a glance: Extremely sturdy. Fixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Special tilting pressure plate.The heat-resistant pressure plate is replaceable and can be tilted up to 35° so it can even clamp on angled or sloping surfaces. Tempered spindle.The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability. Sturdy tommy bar.The sturdy tommy bar has special rounded hand-friendly ends, as well as a hexagonal bolt. This allows powerful, controlled clamping.  

Irwin Vise-Grip 7R Straight Jaw Locking Pliers

The IRWIN Vise-Grip straight Jaw Locking Pliers are suitable for general purpose and provide maximum strength and gripping capacity. Adjusting screw that tightens to draw materials closer together and also provides controlled release. Adjusts to various sizes. Straight serrated jaws with quick-release lever. 7RC: Length: 178mm, Capacity: 38mm10RC: Length: 254mm, Capacity: 48mm These Irwin Vise-Grip Straight Jaw Locking Pliers have the following specification: Length: 178mm (7in)Capacity: 38mm

Irwin Vise-Grip 10CR Curved Jaw Locking Pliers

The IRWIN Vise-Grip Curved Jaw (CR) Locking Pliers feature a unique self-energising lower jaw that delivers 3x more gripping power than traditional locking pliers, with absolutely no slipping or stripping. The slotted geometry of the new ‘self-energising’ Vise-Grip CR locking pliers exponentially increases torque for more secure clamping. The Vise-Grip CR Plies can establish multiple contact points, guaranteeing a significantly tighter grip. As a result, the CR range is especially well-suited for performing in greasy work environments and for manoeuvring in tight spaces where a worker cannot easily get two hands on a tool. The patented curved jaw securely grips multiple surface shapes including round pipes, square or hex bolts and more. These Irwin Vise-Grip Curved Jaw Locking Pliers have the following specification: Length: 254mm (10in).Capacity: 48mm.

Irwin Vise-Grip 7CR Curved Jaw Locking Pliers

The IRWIN Vise-Grip Curved Jaw (CR) Locking Pliers feature a unique self-energising lower jaw that delivers 3x more gripping power than traditional locking pliers, with absolutely no slipping or stripping. The slotted geometry of the new ‘self-energising’ Vise-Grip CR locking pliers exponentially increases torque for more secure clamping. The Vise-Grip CR Plies can establish multiple contact points, guaranteeing a significantly tighter grip. As a result, the CR range is especially well-suited for performing in greasy work environments and for manoeuvring in tight spaces where a worker cannot easily get two hands on a tool. The patented curved jaw securely grips multiple surface shapes including round pipes, square or hex bolts and more. These Irwin Vise-Grip Curved Jaw Locking Pliers have the following specification: Length: 178mm (7in)Capacity: 38mm

Irwin Vise-Grip 6SP 150MM Swivel Pad Locking C-Clamp

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used. Swivel pads are fitted to prevent damage to soft materials and are designed to hold irregular or tapered work. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Visegrip Irwin 6SP Locking C-Clamp Swivel Pad. Length: 150mm (6in)Throat Diameter: 32mm (1 1/4in)Capacity: 50mm (2in)

Irwin 18R Vise-Grip C Clamp

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used. Fitted with regular tips they are ideal for car body work, welding and sheet metal work. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Visegrip Irwin 18R Locking C-Clamp Regular Tip. Length: 450mm (18in) Throat Depth: 250mm (10in) Capacity: 203mm (8in)

Irwin 11R Vise-Grip C Clamp

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used. Fitted with regular tips they are ideal for car body work, welding and sheet metal work. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Visegrip Irwin 11R Locking C-Clamp Regular Tip. Length: 275mm (11in) Throat Depth: 67mm(2.5/8in) Capacity: 102mm (4in)

Irwin 6R Vise-Grip Locking C Glamp

IRWIN Vise-Grip Locking C-Clamps reach into places where ordinary clamps cannot be used. Fitted with regular tips they are ideal for car body work, welding and sheet metal work. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. Visegrip Irwin 6R Locking C-Clamp Regular Tip Length: 150mm (6in) Throat Depth: 32mm (1.1/4in) Capacity: 54mm (2in)

BAHCO DD/S14 Deep Impact Socket 14 Piece Set 1/2in

Bahco DD/S14 Deep Impact Socket Set of 1/2in deep impact sockets, that have a black finish and are made from high performance alloy steel. To be used with machines, for maximum safety use clamping springs. Conforms to DIN 3121-G 12,5 ISO 1174 standards. Comes supplied in a case with 2-component handles, and a 1 piece removable three section plastic box. Sizes: 10, 11, 12 ,13 ,14, 15, 16, 17, 18, 19, 21, 22, 24, and 27mm.

Metric Socket Head Cap Screw DIN 912 - A2 Stainless Steel

Metric Socket Head Cap Screw DIN 912 – A2 (304) Stainless Steel These Metric Socket Head Cap Screws are manufactured from premium A2 (304) stainless steel and produced to DIN 912 / ISO 4762 standards, offering excellent corrosion resistance, high durability, and reliable fastening performance for a wide range of engineering, marine, construction, food processing, and industrial applications. Featuring a cylindrical head with an internal hex (Allen) drive, these socket head cap screws are ideal for applications where high clamping force and a compact head design are required. The internal hex drive allows for high tightening torque while requiring minimal installation clearance, making them particularly suitable for machinery, equipment, automotive components, and precision engineering assemblies. Manufactured from A2 (304) stainless steel, these fasteners provide excellent resistance to rust, moisture, and atmospheric corrosion, making them suitable for both indoor and outdoor environments. Their precision-machined metric threads ensure a secure fit and dependable performance when used with standard metric threaded components. Key Features: Manufactured from premium A2 (304) stainless steel Produced to DIN 912 / ISO 4762 specification Excellent corrosion resistance for indoor and outdoor use Internal hex (Allen) drive for secure, high-torque tightening Compact cylindrical head for installations with limited clearance Precision-machined metric threads for a reliable fit Suitable for use with standard metric threaded components Ideal for engineering, marine, food processing, automotive and industrial applications Available in a wide range of metric diameters and lengths Specifications: Product Type: Metric Socket Head Cap Screw Standard: DIN 912 / ISO 4762 Material: A2 (304) Stainless Steel Finish: Self-Colour Stainless Steel Thread Type: Metric Coarse Head Style: Cylindrical Socket Head Drive Type: Internal Hex (Allen) Applications: Engineering, Marine, Construction, Machinery, Food Processing, Automotive and General Industrial Fastening

Metric Socket Head Cap Screw DIN 912 - 12.9G BZP

Metric Socket Head Cap Screw – Grade 12.9 Bright Zinc Plated (BZP) These Metric Socket Head Cap Screws are manufactured from high-strength Grade 12.9 alloy steel and finished with a durable Bright Zinc Plated (BZP) coating, providing exceptional tensile strength, excellent wear resistance, and improved corrosion protection. Designed for demanding engineering and industrial applications, these precision fasteners are ideal where high clamping forces and a compact head design are required. Manufactured to DIN 912 / ISO 4762 standards, these socket head cap screws feature a cylindrical head with a hexagonal socket drive, allowing high tightening torque using a hex key or Allen key. Their compact head design makes them particularly suitable for applications where space is limited or where a flush, neat finish is preferred. Grade 12.9 cap screws are widely used in machinery, tooling, automation equipment, motorsport, manufacturing, and heavy engineering due to their outstanding mechanical properties and ability to withstand high tensile loads. Key Features: Manufactured from high-strength Grade 12.9 alloy steel Bright Zinc Plated (BZP) finish for improved corrosion resistance High tensile strength for demanding applications Hex socket drive for secure, high-torque tightening Compact cylindrical head for installations with limited clearance Manufactured to DIN 912 / ISO 4762 specification Suitable for use with standard metric threaded components Ideal for machinery, tooling, fabrication, automotive and industrial applications Available in a wide range of metric diameters and lengths Specifications: Product Type: Metric Socket Head Cap Screw Material: Alloy Steel Strength Grade: 12.9 Finish: Bright Zinc Plated (BZP) Thread Type: Metric Coarse Head Style: Cylindrical Socket Head Drive Type: Internal Hex (Allen) Standard: DIN 912 / ISO 4762 Applications: Machinery, Manufacturing, Tooling, Engineering, Automotive, Construction and General Industrial Fastening

Flat Washer Form C DIN 9021 - BZP

Metric Flat Washer Form C – Bright Zinc Plated (BZP) These Metric Flat Washers Form C are manufactured from high-quality steel and finished with a durable Bright Zinc Plated (BZP) coating, offering excellent corrosion resistance and dependable performance across a wide range of engineering, construction, fabrication, and industrial fastening applications. Form C flat washers feature a larger outside diameter than standard Form A washers, providing an increased bearing surface to distribute the clamping load over a wider area. This helps reduce the risk of damage to softer materials, prevents fasteners from pulling through oversized holes, and improves load distribution in demanding applications. Manufactured to DIN 9021 / ISO 7093-1 standards, Form C washers are ideal for use with metric bolts, setscrews, machine screws, and threaded bar where additional support is required. Their larger profile makes them particularly suitable for sheet metal, timber, plastic, and oversized clearance holes. Key Features: Manufactured from high-quality steel Bright Zinc Plated (BZP) finish for enhanced corrosion resistance Large outside diameter for increased load distribution Ideal for oversized holes and softer materials Helps prevent pull-through and surface damage Suitable for use with metric bolts, screws and threaded bar Manufactured to DIN 9021 / ISO 7093-1 specification Ideal for engineering, fabrication, automotive, construction and general industrial use Available in a wide range of metric sizes Specifications: Product Type: Metric Flat Washer Style: Form C (Large Outside Diameter) Material: Steel Finish: Bright Zinc Plated (BZP) Standard: DIN 9021 / ISO 7093-1 Internal Diameter: To suit selected metric bolt size Applications: Engineering, Fabrication, Construction, Automotive, Machinery, Timber, Sheet Metal and General Industrial Fastening

Flat Washer Form A DIN 125 - BZP

Metric Flat Washer Form A – Bright Zinc Plated (BZP) These Metric Flat Washers Form A are manufactured from high-quality steel and finished with a durable Bright Zinc Plated (BZP) coating, providing reliable corrosion resistance and long-lasting performance in a wide range of engineering, construction, automotive, and industrial fastening applications. Designed to distribute the load of a nut or bolt over a larger surface area, Form A flat washers help prevent damage to the material being fastened, reduce the risk of the fastener pulling through, and provide a smooth bearing surface for improved clamping performance. They are ideal for use with metric bolts, setscrews, machine screws, and threaded bar. Manufactured to ISO 7089 / DIN 125 Form A standards, these washers offer consistent dimensions and are suitable for general-purpose fastening applications where a dependable, cost-effective solution is required. Key Features: Manufactured from high-quality steel Bright Zinc Plated (BZP) finish for improved corrosion resistance Distributes clamping load to protect the fastening surface Helps prevent damage and pull-through on softer materials Provides a smooth bearing surface for nuts and bolt heads Suitable for use with metric bolts, screws and threaded bar Manufactured to ISO 7089 / DIN 125 Form A specification Ideal for engineering, automotive, construction and general industrial use Available in a wide range of metric sizes Specifications: Product Type: Metric Flat Washer Style: Form A Material: Steel Finish: Bright Zinc Plated (BZP) Standard: ISO 7089 / DIN 125 Form A Internal Diameter: To suit selected metric bolt size Applications: Engineering, Machinery, Automotive, Construction, Fabrication and General Industrial Fastening

Metric Full Nut DIN 934 - A2 Stainless Steel

Metric Full Nut DIN 934 – A2 (304) Stainless Steel These Metric Full Nuts are manufactured from premium A2 (304) stainless steel and produced to DIN 934 specifications, providing excellent corrosion resistance, durability, and dependable fastening performance across a wide range of engineering, construction, marine, automotive, food processing, and industrial applications. Designed for use with standard metric bolts, setscrews, threaded bar, and studs, these hexagon full nuts feature precision-machined metric threads to ensure a secure fit and consistent clamping force. The A2 (304) stainless steel construction offers outstanding resistance to rust, moisture, and atmospheric corrosion, making these nuts suitable for both indoor and outdoor use. Ideal for professional engineers, fabricators, maintenance technicians, and DIY users alike, DIN 934 full nuts are one of the most commonly used fastening components in machinery, structural assemblies, equipment manufacture, and general-purpose applications. Available in a comprehensive range of metric thread sizes, they provide a reliable and long-lasting fastening solution. Key Features: Manufactured from premium A2 (304) stainless steel Produced to DIN 934 specification Excellent resistance to corrosion and rust Precision-machined metric threads for a secure fit Suitable for use with metric bolts, setscrews, studs and threaded bar Ideal for indoor and outdoor applications High-quality finish for professional engineering applications Suitable for marine, construction, automotive, food processing and general industrial use Available in a wide range of metric thread sizes Specifications: Product Type: Metric Full Nut Standard: DIN 934 Material: A2 (304) Stainless Steel Finish: Self-Colour Stainless Steel Thread Type: Metric Coarse Nut Style: Hexagon Full Nut Compatible With: Metric Bolts, Setscrews, Studding and Threaded Bar Applications: Engineering, Marine, Construction, Automotive, Machinery, Food Processing and General Industrial Fastening

Metric Full Nut DIN 934 - BZP

Metric Full Nut DIN 934 – Bright Zinc Plated (BZP) These Metric Full Nuts are manufactured from high-quality steel and finished with a durable Bright Zinc Plated (BZP) coating, providing reliable strength, excellent corrosion resistance, and dependable fastening performance for a wide range of engineering, construction, automotive, fabrication, and industrial applications. Manufactured to DIN 934 specifications, these standard hexagon full nuts are designed for use with metric bolts, setscrews, threaded bar, and studs. Precision-machined metric threads ensure a secure fit and consistent clamping force, making them suitable for both new assemblies and maintenance applications. The Bright Zinc Plated finish offers enhanced protection against corrosion in indoor and lightly corrosive environments while providing a clean, professional appearance. Available in a comprehensive range of metric thread sizes, these full nuts are an essential fastening component for workshops, machinery, structural steelwork, equipment manufacture, and general engineering. Key Features: Manufactured from high-quality steel Bright Zinc Plated (BZP) finish for improved corrosion resistance Produced to DIN 934 specification Precision-machined metric threads for a secure fit Suitable for use with metric bolts, setscrews, studs and threaded bar Hexagon design for easy installation using standard spanners or sockets Ideal for engineering, automotive, construction and industrial applications Available in a wide range of metric thread sizes Specifications: Product Type: Metric Full Nut Standard: DIN 934 Material: Steel Finish: Bright Zinc Plated (BZP) Thread Type: Metric Coarse Nut Style: Hexagon Full Nut Compatible With: Metric Bolts, Setscrews, Studding and Threaded Bar Applications: Engineering, Construction, Fabrication, Automotive, Machinery, Maintenance and General Industrial Fastening

Nyloc Nut Metric Type T DIN 985 - A2 (304) Stainless Steel

Metric Nyloc Nut Type T DIN 985 – A2 (304) Stainless Steel Secure your fasteners with confidence using these Metric Nyloc Nuts Type T, manufactured from high-quality A2 (304) stainless steel. Featuring an integrated nylon locking insert, these self-locking nuts are designed to resist loosening caused by vibration and movement, making them ideal for demanding engineering, automotive, marine, construction, and industrial applications. Manufactured to DIN 985 standards, these prevailing torque lock nuts provide a reliable and reusable fastening solution when used with compatible metric bolts and setscrews. The corrosion-resistant A2 (304) stainless steel construction offers excellent durability in both indoor and outdoor environments, making them particularly suitable for applications exposed to moisture, humidity, or mild chemicals. The nylon insert grips the bolt threads as the nut is tightened, helping to maintain clamp force and reduce the risk of the assembly working loose over time. Available in a range of metric thread sizes, these Nyloc nuts are widely used wherever a secure, vibration-resistant fixing is required. Key Features: Manufactured from corrosion-resistant A2 (304) stainless steel Integral nylon insert helps prevent loosening due to vibration Self-locking design provides a secure and reliable fastening Manufactured to DIN 985 specification Suitable for use with standard metric bolts and setscrews Excellent resistance to corrosion in indoor and outdoor environments Ideal for engineering, automotive, marine, fabrication and construction applications Available in a wide range of metric thread sizes Specifications: Product Type: Metric Nyloc Nut Style: Type T Material: A2 (304) Stainless Steel Locking Method: Nylon Insert Thread Type: Metric Coarse Standard: DIN 985 Finish: Self-colour Stainless Steel Applications: General Engineering, Marine, Automotive, Construction, Machinery and Industrial Fastening Please note: The nylon insert is generally suitable for continuous operating temperatures up to approximately 120°C. For high-temperature applications, an all-metal locking nut should be used instead.

Metric Nyloc Nut Type T DIN 985 - BZP

Metric Nyloc Nut Type T DIN 985 – Bright Zinc Plated (BZP) These Metric Nyloc Nuts Type T are manufactured from high-quality steel and finished with a durable Bright Zinc Plated (BZP) coating, providing excellent strength, reliable corrosion resistance, and a secure locking action for a wide range of engineering, automotive, construction, and industrial fastening applications. Featuring an integral nylon locking insert, these self-locking nuts are designed to resist loosening caused by vibration, movement, and repeated loading. As the nut is tightened, the nylon insert grips the bolt threads to create a prevailing torque, helping to maintain clamp force and improve the security of the fastening assembly. Manufactured to DIN 985 standards, these Nyloc nuts are ideal for use with standard metric bolts and setscrews, making them suitable for machinery, fabrication, vehicle maintenance, equipment assembly, and general engineering applications. Key Features: Manufactured from high-quality steel Bright Zinc Plated (BZP) finish for improved corrosion resistance Integral nylon insert provides a secure self-locking action Helps prevent loosening caused by vibration and movement Manufactured to DIN 985 specification Suitable for use with standard metric bolts and setscrews Easy to install using standard spanners or sockets Ideal for engineering, automotive, construction and industrial applications Available in a wide range of metric thread sizes Specifications: Product Type: Metric Nyloc Nut Style: Type T Material: Steel Finish: Bright Zinc Plated (BZP) Locking Method: Nylon Insert Thread Type: Metric Coarse Standard: DIN 985 Applications: Engineering, Automotive, Construction, Fabrication, Machinery, Maintenance and General Industrial Fastening Please Note: The nylon insert is generally suitable for continuous operating temperatures up to approximately 120°C. For applications involving higher temperatures, an all-metal locking nut is recommended.