Parweld Galvanising Spray 400ML

Parweld Galvanising Spray – 400ml Protective Zinc-Rich Coating for Rust Prevention and Metal Repair The Parweld Galvanising Spray (400ml) is a high-quality, fast-drying spray designed to provide a durable, zinc-rich protective coating on bare or rusted steel surfaces. Ideal for touch-ups, repairs, and maintenance, this spray mimics the galvanised finish, helping to prevent corrosion and extend the life of metal structures and components. Perfect for use in workshops, fabrication, construction, and maintenance, the spray forms a tough barrier that withstands harsh environmental conditions, including moisture and salt exposure. Key Features: Zinc-rich formula for effective corrosion protection Fast drying to touch in minutes and fully dry in hours Provides a smooth, galvanised finish similar to hot-dip galvanising Suitable for use on steel surfaces, welds, and metal repairs Resists moisture, rust, and weathering Convenient 400ml aerosol for easy application and precise coverage Typical Applications: Steel structures and frameworks Weld seams and joints Metal fences and gates Fabrication touch-ups and repairs Industrial maintenance and refurbishment Usage Instructions:   Shake can vigorously before use. Ensure the surface is clean, dry, and free from loose rust or contaminants. Spray from 20–30cm distance using even, sweeping motions. Apply multiple light coats if necessary, allowing drying time between coats. Allow full cure before handling or exposure to harsh environments.

Cleanweld Anti Spatter Spray 600ML

Cleanweld Anti Spatter Spray 600ml Cleanweld anti spatter spray is vegetable oil based, contains no solvents or liquid gases and is water soluble. Can be used for protection of welding torch parts, work pieces, jigs and fixtures. Features: Non-solvent based formulation that contains no silicones or harmful chemicals It is non-flammable Does not interfere with the welding process or over painting Compressed air canister technology allows the can to be used in any position Very economical Inside the can, fluid is separated from the propellant, so the spray is not diluted Higher yields per can that conventional aerosols

The Works Pre-Weld Max Anti Spatter Spray

The Works Pre-Weld Max Anti Spatter Spray Suitable for all types of welding, simply by spraying a light film of 'The Works' on material prior to tacking or welding gives clean welding conditions, prevents spatter adhesion, porosity and greatly reduces dressing time. It contains a corrosion inhibitor, creates better welds and reduces heat discolouration. There are no propellants involved, 100% product expelled using this unique spraying system that works at 360° with no wastage.

Hycote Grey Primer Aerosol Paint 400ML

Hycote Grey Primer Aerosol Paint – 400ml High-Quality Acrylic-Based Primer for Automotive and Industrial Applications The Hycote Grey Primer Aerosol Paint – 400ml is an optimised acrylic-based primer designed to provide the initial step to professional body shop-type finishes. This primer is compatible with most automotive finishes, including acrylics, cellulosics, alkyds, and polyurethanes. It is ideal for use on all types of automotive body panels for rectification and repair work. Key Features: Enhanced Covering Power: Provides excellent coverage, reducing the number of coats needed. Excellent Adhesion: Bonds well to metals and rigid plastics, ensuring a strong base for topcoats. Suitable for Weld-Through Operations: Can be used in areas where welding is required without compromising the weld quality. Professional Standard Application: Equipped with an adjustable fan spray nozzle for consistent and even application. Easily Sandable: Allows for smooth surface preparation before applying topcoats. Typical Applications: Automotive body panels for rectification and repair. Metal and rigid plastic surfaces requiring priming before painting. Areas involved in weld-through operations. Usage Instructions:   Surface Preparation: Ensure surfaces are clean, dry, and free from loose paint, rust, or contaminants. Application: Shake the can well before use. Apply in light, even coats from a distance of 20–30 cm. Drying Time: Allow each coat to dry before applying additional layers. Full curing time may vary; refer to the product's technical data sheet for specifics. Sanding: Once dry, the primer can be sanded to achieve a smooth surface for topcoating.

Force Fixt Power Fluid With PTFE 5Ltr

Fixt Power Fluid with PTFE – 5 Litre High-Performance Lubricant & Penetrant for Demanding Industrial Applications Fixt Power Fluid with PTFE is a multi-purpose, high-performance lubricant and penetrant, specially formulated for industrial, engineering, and maintenance use. Infused with PTFE (Polytetrafluoroethylene), it provides long-lasting lubrication and outstanding protection against wear, corrosion, and friction—even in harsh working environments. Supplied in a cost-effective 5-litre container, this powerful formula is ideal for workshop use, ensuring consistent performance and reducing downtime on the shop floor. Key Features Enhanced with PTFE for Superior Lubrication Contains micronised PTFE particles, offering exceptional low-friction performance and creating a long-lasting protective film on surfaces. Penetrates and Releases Seized Components Quickly works into rusted or corroded parts—ideal for freeing stuck bolts, fasteners, and fittings. Excellent Water Repellency Displaces moisture and protects against rust and corrosion in damp or outdoor conditions. Reduces Wear & Friction Extends the service life of tools, machinery, and moving parts by minimising metal-to-metal contact. Non-Sticky Finish Leaves a clean, dry film that resists dirt, dust, and grime buildup. Wide Range of Applications Suitable for chains, hinges, pulleys, gears, sliding mechanisms, tools, and more.