BÖHLER Bohler Thermanit 308L TIG Filler Wire 5KG Pack

Bohler Thermanit E308L TIG Filler Wire 5KG Stainless; resistant to intercrystalline corrosion and wet corrosion up to 350 °C (662 °F). Corrosion-resistant similar to matching low-carbon and stabilized austenitic 18/8 CrNi(N) steels/cast steel grades. High toughness at subzero temperatures as low as –196 °C (–321 °F). For joning and surfacing applications with matching and similar – stabilized and non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels/cast steel grades. For joining and surfacing work on cryogenic matching / similar austenitic CrNi(N) steels / cast steel grades.ClassificationsAWS A5.9: ER308LEN ISO 14343-B: SS308LEN ISO 14343-A: W 19 9 L

BÖHLER Bohler Mild Steel TIG Filler Rod EMK 6 - 5KG

Bohler EMK 6 Mild Steel TIG Filler Rod - 5KG ER70S-6 Mild Steel Filler Rod GTAW rod with high silicon content. The welding rod is suited for joints in boiler and vessel fabrication as well as in structural steel engineering. Böhler EMK 6 can be used in sour gas applications (HIC-Test acc. to NACE TM-02-84). Test values for SSC-test are available too. Spec: AWS A5.18 ER70S-6 Rod Diameter: 1.6mm, 2.0mm, 2.4mm, 3.2mm Approvals: TÜV (09717.), LTSS, SEPROZ, CE  

BÖHLER Bohler Union 5356 ALMG5 Aluminium Tig Filler Rod 2.5KG

Böhler Union ALMG5(5356) Aluminium Magnesium TIG Filler Rods 5KG TIG welding rod for AlMg alloys containing up to 5 % Mg. High Strength: 5356 wire has relatively high tensile strength, making it suitable for applications where strength is a primary concern, such as in boat and shipbuilding, aerospace, and structural welding. Good Corrosion Resistance: This alloy offers good resistance to corrosion, which is vital for applications exposed to harsh environments, like marine or outdoor structures. Weldability: 5356 wire is known for its ease of use and smooth arc characteristics, making it suitable for both beginner and experienced welders. Low Melting Point: It has a lower melting point compared to some other aluminum alloys, which can help reduce the risk of burn-through or warping when welding thin aluminum materials. Anodizing Compatibility: 5356 aluminum is compatible with anodizing, which is a surface treatment process often used in various applications. Versatility: It can be used to weld various aluminum alloys, including 5052, 5083, 5086, 5154, and 6061. Spec: AWS A5.10 ER5356 Rod Diameter: 1.6mm, 2.4mm, 3.2mm Approvals: TÜV (2198.), DB (61.132.01)

BÖHLER Bohler Union 4043 ALSi5 Aluminium TIG Filler Rod 2.5KG

Bohler 4043 Aluminium TIG Filler Rod containing 5% silicon. Filler Rod for GTAW of Al alloys containing up to 2% of alloying elements and for aluminium alloys containing up to 7% Si. Very fluid weld pool. Why use 4043 grade Aluminium wire?   General Purpose Welding: 4043 is often chosen as a general-purpose aluminum welding wire because it can be used for a wide range of aluminum alloys. It's suitable for welding 3003, 3004, 5052, 6061, and other common aluminum alloys. Good Fluidity: 4043 wire has good fluidity during welding, which means it flows smoothly and creates clean and aesthetically pleasing welds. Low Melting Point: It has a lower melting point compared to some other aluminum welding wires, making it suitable for thin aluminum materials and reducing the risk of burn-through. Low Hot Cracking Sensitivity: 4043 wire has relatively low hot cracking sensitivity, which means it is less likely to crack during the welding process, especially when used on aluminum alloys with a high thermal expansion coefficient. Corrosion Resistance: While not as corrosion-resistant as 5356 aluminum welding wire, 4043 still offers reasonable corrosion resistance, making it suitable for many applications. Heat-Treatable Alloys: It is commonly used for welding heat-treatable aluminum alloys because it minimizes the risk of affecting the heat treatment properties of the base metal. Marine and Automotive Applications: 4043 wire is often used in marine and automotive industries for tasks such as repairing aluminum boats or welding components in automotive applications.  

BÖHLER Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG

Bohler Thermanit GE316L Stainless Steel Tig Filler Rod 5KG Bohler Thermanit GE-316L stainless steel tig wire is ideal for joining and surface applications with matching and similar, non-stabilized and stabilized, austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Classifications EN ISO 14343-A EN ISO 14343-B AWS A5.9 (Mat. No.) G 19 12 3 L Si SS316LSi ER316LSi (1.4430) Characteristics and typical fields of application Austenitic stainless steel wire electrode, resistant to inter-crystalline corrosion, wet corrosion resistant up to 400 °C (752 °F). Heat resistant and nonscaling up tp 800 °C (1472 °F). Corrosion-resistance similar to matching low-carbon and stabilized austenitic 17/12/2-CrNiMo steels / cast steel grades. For joining and surfacing application with matching and similar – non-stabilized – austenitic CrNi(N) and CrNiMo(N) steels and cast steel grades. Low temperature service down to –196 °C (-320 °F). Base materials TÜV-certified parent metal 1.4401 – X5CrNiMo17-12-2; 1.4404 – X2CrNiMo17-12-2; 1.4435 – X2CrNiMo18-14-3; 1.4436 – X3CrNiMo17-13-3; 1.4571 – X6CrNiMoTi17-12-2; 1.4580 – X6CrNiMoNb17-12-2; 1.4583 – X10CrNiMoNb18-12; 1.4409 – GX2CrNiMo19-11-2; UNS S31603, S31653; AISI 316L, 316Ti, 316Cb Typical analysis of solid wire (wt.-%) C Si Mn Cr Mo Ni wt-% 0.02 0.8 1.7 18.8 2.8 12.5 Structure: Austenite with part ferrite Mechanical properties of all-weld metal Heattreatment Yield strength Rp0.2 Yield strength Rp1.0 Tensile strength Rm Elongation A (L0=5d0) Impact work ISO-V CVN J MPa MPa MPa % +20 °C –196 °C aw 380 420 (≥ 320) 560 (≥ 510) 35 (≥ 25) 70 ≥ 32 Operating data Polarity: DC ( + ) Shielding gas: (EN ISO 14175) M12, M13 ø mm 0.8 1.0 1.2 Spool: BS300 B300 Drum Welding instruction Materials Preheating Postweld heat treatment Matching and similar non-stabilized and stabilized steels / cast steel grades None Mostly none. If necessary, solution annealing at 1050°C (1922°F) – pay attention to tendency to embrittlement Approvals TÜV (00489), DB (43.132.10), DNV·GL, CE