Weld Star Weldstar ER316L Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire that has a low carbon content, which reduces the possibilities of intergranular carbide precipitation, while increasing the resistance to intergranular corrosion without the use of stabilisers such as niobium or titanium. The presence of molybdenum provides creep resistance in a halide atmosphere. Ideal for joining and surfacing of stainless steels of similar composition (CrNi and CrNiMo steels/cast steels). Including low-carbon molybdenum-bearing austenitic alloys. Typically used in the food processing, dairy and chemical industries etc.    Typical Base Materials All 300 series austenitic stainless steel, mainly low-carbon molybdenum-bearing* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 19 12 3 L AWS A5.9 - ER 316L

Weld Star Weldstar ER110S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing NiCrMo for single pass or multipass welding of low alloy steels. Designed for welding high yield strength steels with a minimum tensile strength of 770 MPa. Excellent impact strength at low temperatures down to -40°C. Ideal for steels requiring tough weld metal for critical applications. Typically used in the metal working industry, offshore fabrication, chemical & petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700 etc.** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn3Ni1CrMo AWS A5.28 - ER 110S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.080 0.60 1.60 <0.015 <0.015 <0.25 0.30               Ni% Mo% Al% V% Ti% Zr%   1.50 0.30 <0.030 0.10 <0.050 <0.050     Mechanical Properties (Typical) Tensile Strength 800 MPa   Yield Strength 750 MPa   Elongation 19%   Impact Strength 70 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF