Weld Star Weldstar Monel 400 NiCu-7 TIG Filler Wire 5KG

Features and Applications Nickel-copper alloy designed for welding Monel. Good bead appearance and excellent corrosion resistance in saline solutions. The weld metal has an excellent resistance to a large amount of corrosive media’s. This alloy is also used for weld overlay. Typically used in marine construction, especially offshore, heat exchangers, pipelines, desalination plants, chemical, petrochemical and energy engineering industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Monel alloys 400 and 404** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 4060 - NiCu30Mn3Ti AWS A5.14 - ER NiCu-7   Chemical Composition % C% Mn% Fe% P% S% Si%   max 3.00 0.50 max max max   0.15 4.00 2.50 0.020 0.015 1.00                 Cu% Ni% Co% Ti% Al% Nb+Ta%   28.00 62.00 max 1.50 max max   32.00 69.00 1.00 3.00 1.00 0.50     Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥180 MPa   Elongation ≥30%   Impact Strength ≥80 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG