Weld Star Weldstar 5356 AlMg5 Aluminium TIG Filler Rod 1.6, 2.4 & 3.2MM - 2.5KG Pack

Weldstar 5356 AlMg5 Aluminium TIG Filler Rod 1.6, 2.4 & 3.2MM - 2.5KG Pack Aluminium wire for welding aluminium alloys with a maximum 5% Magnesium. Features and Applications Excellent weldabillity and good mechanical strength, combined with good corrosion resistance in seawater conditions. AlMg5 is one of the most popular types of aluminium alloys. ER 5356 can also be used for welding components that need to be anodized. Thicker sections should be preheated to (150°C) prior to welding. Typically used on applications in the construction of boats, bicycles, trucks, pressure vessels, storage tanks, railways and automotive industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials AlMg3, AlMg4, AlMg5,AlMgSi0.5, AlMgSi1; AlMgMn, AlZnMg1, G-AlMg3Si, G-AlMg5Si, G-AlMg10, AlMg1SiCu, AlMgSi0,7, AlZn4,5Mg1, AlSi1MgMn, AlSiMg(A), 3.3545, 3.3206, 3.3210, 3.2315, 3.3211, 3.4335, EN AW 5086, EN AW 6060, EN AW 6005A, EN AW , EN AW 6061, EN AW 7020, EN AC 51400, EN AC 51300, EN AC 51100, EN AW 5454* * Illustrative, not exhaustive list   Standards EN ISO 18273 - S Al 5356 (AlMg5Cr(A)) AWS A5.10 - ER 5356   Chemical Composition % (Typical) Si% Fe% Cu% Mn% Mg%     0.0401 0.1561 0.0014 0.1140 4.8277                   Cr% Zn% Ti% Be% Al%     0.1383 0.0048 0.0939 <0.0001 Rem.       Mechanical Properties Tensile Strength ≥235 MPa   Yield Strength ≥110 MPa   Elongation ≥17 %   Impact Strength ≥16 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER4043 AlSi5 Aluminium TIG Filler Wire 1.6, 2.4 & 3.2MM - 2.5KG Pack

Weldstar 4043 AlSi5 Aluminium TIG Filler Wire 1.6, 2.4 & 3.2MM - 2.5KG Pack Aluminium TIG Filler wire for welding aluminium alloys with a maximum 2% alloying elements. Including aluminium alloys containing up to 7% Si. Features and Applications: The silicon addition results in improved fluidity (wetting action), making the alloy the preferred choice for welders. ER 4043 is not sensitive to weld cracking and produces bright, almost smut-free welds. Not recommended for anodizing. Thicker sections should be preheated to (150°C) prior to welding. Typically used on many industrial manufacturing sectors, such as automotive, production of mobile equipment and shipbuilding etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials AlMgSi 0, AlSiMg (A), AlSi 1 MgMn, AlMg1SiCu, 3.3206, 3.3210, 3.2315, 3.3211, EN AW 6060, EN AW 6005A, EN AW 6082, EN AW 6061, EN AC 45000* * Illustrative, not exhaustive list   Standards EN ISO 18273 - S Al 4043 (AlSi5) AWS A5.10 - ER 4043   Chemical Composition % (Typical) Si% Fe% Cu% Mn% Mg%     5.0198 0.1578 0.0124 0.0035 0.0051                   Zn% Ti% Be% Al%       0.0036 0.0177 <0.0001 Rem.         Mechanical Properties Tensile Strength ≥120 MPa   Yield Strength ≥40 MPa   Elongation ≥8 %   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1, I3   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Monel 400 NiCu-7 TIG Filler Wire 5KG

Features and Applications Nickel-copper alloy designed for welding Monel. Good bead appearance and excellent corrosion resistance in saline solutions. The weld metal has an excellent resistance to a large amount of corrosive media’s. This alloy is also used for weld overlay. Typically used in marine construction, especially offshore, heat exchangers, pipelines, desalination plants, chemical, petrochemical and energy engineering industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Monel alloys 400 and 404** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 4060 - NiCu30Mn3Ti AWS A5.14 - ER NiCu-7   Chemical Composition % C% Mn% Fe% P% S% Si%   max 3.00 0.50 max max max   0.15 4.00 2.50 0.020 0.015 1.00                 Cu% Ni% Co% Ti% Al% Nb+Ta%   28.00 62.00 max 1.50 max max   32.00 69.00 1.00 3.00 1.00 0.50     Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥180 MPa   Elongation ≥30%   Impact Strength ≥80 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 59 NiCrMo-13 TIG Filler Wire 5KG

Features and Applications Alloy 59 is a nickel-chromium-molybdenum alloy with an extra low carbon and silicon content. Versatile alloy with excellent wet corrosion resistance for the most demanding applications. The high level of Mo is similar to alloy C276 but performs better in a wider range of oxidising media’s. Typically used in the welding of aggressively corrosive media’s, including scrubbers for flue gas desulphurisation, digesters and papermaking equipment, chemical process plants, corrosion resistant overlays and in severe offshore and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 22, Alloy 625, Alloy 276, Alloy 686** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6059 - NiCr23Mo16 AWS A5.14 - ER NiCrMo-13   Chemical Composition % C% Mn% Fe% P% S% Si%   max max max  max max max   0.010 0.50 1.50  0.020 0.005 0.08                 Ni% Co% Al% Cr% Mo%     56.00 max 0.10 22.00 15.00     min 0.30 0.40 24.00 16.50       Mechanical Properties Tensile Strength ≥760 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  

Weld Star Weldstar Alloy C22 NiCrMo10 TIG Filler Wire

Features and Applications Nickel-chromium-molybdenum alloy designed for joining C22, 625, 825 or combinations of these alloys. Provides a tough Nb-free weld metal for dissimilar welds in super austenitic and super duplex stainless steels. Offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Extensively used for overlays and cladding of lower alloy steels. Typically used in the welding of aggressively corrosive media in chemical processing plants, corrosion resistant overlays and in severe offshore and petrochemical environments etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 22, Alloy 625, Alloy 825, Alloy 926** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6022 - NiCr21Mo13Fe4W3 AWS A5.14 - ER NiCrMo-10   Chemical Composition % C% Mn% Fe% P% S% Si% Cu% max max 2.00 max max max  max 0.010 0.50 6.00 0.020 0.010 0.08  0.50               Ni% Co% Cr% Mo% V% W%   49.00 max 20.00 12.50 max 2.50   min 2.50 22.50 14.50 0.30 3.50     Mechanical Properties Tensile Strength ≥690 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG  

Weld Star Weldstar Alloy C276 NiCrMo-4 TIG Filler Wire 5KG

Features and Applications ER-NiCrMo-4 is used for the welding of alloys that have similar chemical compositions, this includes dissimilar materials of nickel-base alloys, steels and stainless steels. Due to the high molybdenum content, this alloy offers excellent resistance against stress & corrosion cracking, pitting and crevice corrosion. Typically used on pipelines, pressure vessels, chemical processing plants, offshore oil platforms, gas facilities, power generation and marine environments etc. Test Certificates can be found online @wilkinsonstar247.com   Typical Base Materials N10276, W.Nr: 2.4819, NiMo16Cr15W, Alloy C4, Alloy C276** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6276 - NiCr15Mo16Fe6W4 AWS A5.14 - ER NiCrMo-4   Chemical Composition % C% Mn% Fe% P% S% Si%   max max max max max max   0.05 0.80 0.70 0.030 0.010 0.75                 Cu% Ni% Co% Ti% Al%     max 93.00 max 2.00 max     0.20 min 1.00 3.50 1.00       Mechanical Properties Tensile Strength ≥690 MPa   Yield Strength -   Elongation -   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar Alloy 82 NiCr-3 TIG Filler Wire 5KG

Features and Applications Alloy 82 is used for the welding of alloys 600, 601, 690, 800 and 800HT etc. Weld metal deposited has high strength and good corrosion resistance, including oxidation resistance and creep rupture strength at elevated temperatures. Ideal for dissimilar welding applications between various nickel alloys, stainless steels, carbon steels including overlay. Suitable for applications ranging from cryogenic to high temperatures making this alloy one of the most used in the nickel family. Typically used in the power generation and petrochemical industries etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Alloy 600, Alloy 601, Alloy 690, Alloy 800, Alloy 330** Illustrative, not exhaustive list   Standards EN ISO 18274 - Ni 6082 - NiCr20Mn3Nb AWS A5.14 - ER NiCr-3   Chemical Composition % C% Mn% Fe% P% S% Si%   max 2.50 max max max max   0.05 3.50 3.00 0.030 0.015 0.50                 Cu% Ni% Co% Ti% Cr% Nb+Ta%   max 67.00 max max 18.00 2.00   0.50 min 1.00 0.75 22.00 3.00     Mechanical Properties Tensile Strength ≥600 MPa   Yield Strength ≥360 MPa   Elongation ≥30 MPa   Impact Strength ≥100 MPa   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER80S-Ni1 Low Temp Mild Steel TIG Filler Wire 5KG

Features and Applications Copper coated, Ni-alloy (1,0% Ni), solid wire for low temperature, fine grained and austempering steels. Excellent impact toughness due to the addition of Nickel. Good mechanical properties at sub-zero temperatures down to -50°C. Especially suitable for use in the offshore industry. Typically used on the building up of cranes, transport, tanks, industrial facilities, equipment in general, pipelines, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A515, A714, A131, A369, A210, L290, P235 T1/T2, P275 T1 ; L360, L415; P275T2, P355N ; X-42, X46, X62, X60 ; P235GH, P355GH ; A283, A285, A414, A372, A662, S275, S420, A516, A255, A333, A350, A612** Illustrative, not exhaustive list   Standards EN ISO 14341-A - G 3Ni1 AWS A5.28 - ER 80S-Ni1   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.09 0.70 1.20 <0.150 <0.150 <0.25             Cr% Ni% Mo% Al% V% Zr+Ti% <0.15 1.00 <0.15 <0.200 <0.030 <0.50   Mechanical Properties (Typical) Tensile Strength 600 MPa   Yield Strength 480 MPa   Elongation 26%   Impact Strength 100 J   Test Temperature -50ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar A15 ER70S-2 Mild Steel TIG Wire 5KG

Features and Applications Micro-alloyed steel, triple de-oxidised (Ti, Al, Zr) suitable for the welding of C-Mn and low-alloy steels. Ideal for use on greasy and oxidised surfaces subsequent to any coating processes. (i.e. galvanised steel) Works well at low temperatures. Typically used on tanks, containers, car industry, structural work, household appliances, pipelines, boilers, naval & petrochemical sectors etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials A106, A210, A234 S355J2, S380N, P235GH, GS 45, P295GH, P355GH, S355N** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 2Ti AWS A5.18 - ER 70S-2   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.06 0.60 1.20 <0.020 <0.020 <0.25             Cr% Ni% Mo% Al% V% Zr+Ti% <0.10 <0.10 <0.050 0.100 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 560 MPa   Yield Strength 480 MPa   Elongation 24%   Impact Strength 50 J   Test Temperature -30ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF  

Weld Star Weldstar ER2594 Super Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by a PREN (Pitting Resistance Equivalent Number) at least 40, thereby allowing the weld metal to be called “super duplex stainless steel”. Provides excellent resistance to intergranular corrosion, pitting and stress corrosion cracking in chloride environments. Over-alloyed with nickel compared to the base material to ensure the optimum combination of microstructure, mechanical properties and corrosion resistance. This alloy is widely used in applications in which corrosion resistance is of the utmost importance. Typically used in the petrochemical and offshores industries, pulp and paper and in the production of pollution control equipment. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S32750, S32760, J93380, J93404, S32550, J93370, J93372** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 25 9 4 N L AWS A5.9 - ER 2594   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 <2.00 <1.00 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     9.33 25.10 3.97 <1.50 0.24       Mechanical Properties Tensile Strength ≥620 MPa   Yield Strength ≥550 MPa   Elongation ≥18 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER2209 Duplex Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic-ferritic duplex stainless steel wire characterised by its high tensile strength. The weld metal offers excellent resistance to stress corrosion, cracking and pitting. Ideal for joining 22% Cr duplex stainless steel base materials, commonly called 2205. The ferrite content of the weld metal will be lower than the ferrite content of 2205 base metals. Recommended working temperature ranges from cryogenic to 300°C. Typically used in the petrochemical and offshore industries, acid gas industry and on chemical transportation equipment etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS S31803, UNS S32205, UNS S39209** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 22 9 3 N L AWS A5.9 - ER 2209   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.03 1.52 <0.90 <0.020 <0.030                   Ni% Cr% Mo% Cu% N%     8.55 22.95 3.11 <0.50 0.159       Mechanical Properties Tensile Strength ≥550 MPa   Yield Strength ≥450 MPa   Elongation ≥20 %   Impact Strength ≥50 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER410 Stainless Steel TIG Filler Wire 5KG

Weldstar ER410 Stainless Steel TIG Filler Wire 5KG Features and Applications Stainless steel wire designed to weld stainless steels of similar composition, including deposition of overlays on carbon steels to resist corrosion, erosion and abrasion. ER 410 contains sufficient carbon to enable air-hardening transformation of the weld metal to a predominately martensitic microstructure. Preheat and postweld heat treatments are required to achieve welds of adequate ductility for many  engineering purposes. Ideal for welding or repairing 12% Cr air-hardenable stainless steels like types 410, 416, 420, 431 and cast C-15. Typically used on applications for heat furnaces and turbine part production etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Wrought or cast martensitic, types 403, 405, 410, and 416 stainless steel* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 13 AWS A5.9 - ER 410   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.015 0.55 0.48 0.004 0.028                   Ni% Cr% Mo% Cu%       0.37 12.90 0.08 0.15         Mechanical Properties Tensile Strength ≥450 MPa   Yield Strength ≥250 MPa   Elongation ≥15 %

Weld Star Weldstar ER385 Stainless steel TIG Filler Wire 5KG

Features and Applications Super austenitic stainless steel wire characterised by its high resistance to stress corrosion cracking. High Ni content in conjunction with the addition of Cu also results in excellent resistance in sulphuric solutions. Ideal for environments subject to pitting and crevice corrosion attacks. The microstructure is fully austenitic and is less sensitive to ferrite and sigma phase precipitation than conventional grades with high molybdenum contents. Typically used in the phosphoric acid and chemical fertiliser industries, hydrometallurgy, paper industry and applications subject to seawater etc. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials UNS N08904, ASTM B625, B673, B674, B677** Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 20 25 5 Cu L AWS A5.9 - ER 385   Chemical Composition % (Typical) C% Mn% Si% S% P%     <0.025 1.72 <0.50 <0.020 <0.020                   Ni% Cr% Mo% Cu%       24.87 19.79 4.24 1.36         Mechanical Properties Tensile Strength ≥510 MPa   Yield Strength ≥320 MPa   Elongation ≥25 %   Impact Strength -   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG

Weld Star Weldstar ER307Si Stainless Steel TIG Filler Wire 5KG

Features and Applications Austenitic stainless steel wire with a significant amount of manganese, making the all weld metal in most cases fully austenitic. High mechanical strength and excellent crack resistance. Increased silicon content promotes weld pool fluidity to give a smooth deposit appearance. Ideal for dissimilar welding between steel and stainless steel, armour plate and exhaust systems etc. Suitable for depositing stress relaxing buffer layers on crack sensitive base metals including hardfacing. Typically used on applications subject to atmospheric and corrosive media’s. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials Armour plate, exhaust systems (type 409, 304), high Manganese austenitic steel, difficult to weld steels such as 42CrMo4, C45, 42MnV7, tool steels, 1.3401, X120Mn12 etc.* * Illustrative, not exhaustive list   Standards EN ISO 14343-A - W 18 8 Mn AWS A5.9 - ER 307Si   Chemical Composition % (Typical) C% Mn% Si% S% P%     0.045 6.06 0.82 0.005 0.029                   Ni% Cr% Mo% Cu%       8.02 18.35 0.05 0.030         Mechanical Properties Tensile Strength ≥500 MPa   Yield Strength ≥350 MPa   Elongation ≥25 %   Impact Strength ≥100 J   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar Corten ER80S-G TIG Filler Wire 5KG

Features and Applications Solid wire suitable for welding weather resistant structural steels like Corten and other high strength low-alloy steels. Alloyed with copper and nickel which gives a high resistance against atmospheric corrosion. This wire provides a unique aesthetic appeal and can be identified by its typically reddish rust or patina look for structural and artistic applications. Typically used on the construction of containers, tanks, bridges, building panels, chimneys, means of transport, offshore platforms etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S235JRW, S235J2G3 ; Patinax 37, Alcodur50, Koralpin 52, ; S355J2G3Cu, 9CrNiCuP3-2-4 ; Corten A - B1 ; TsT52.3, S355K2W** Illustrative, not exhaustive list   Standards EN ISO 636-A - W Z3Ni1 AWS A5.28 - ER 80S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% 0.08 0.80 1.40 <0.020 <0.020 <0.40             Cr% Ni% Mo% Al% V% Zr+Ti% 0.25 0.80 <0.05 <0.200 <0.030 <0.15   Mechanical Properties (Typical) Tensile Strength 630 MPa   Yield Strength 550 MPa   Elongation 22%   Impact Strength 60 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER120S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing NiCrMo for welding ultra-high tensile strength steels. Designed for fine grain steels exceeding 890 MPa yield strengths. High impact strength at low temperatures with exceptional plasticity of the weld deposit. Typically used on lifting and handling machinery, bridges, tanks, transport, shipbuilding, railway, mines, cranes, frames, etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S890QL, S960Q ; P460NH, P460NL1 ; Weldox 900, Weldox 960, Strenx 960** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn4Ni2,5CrMo AWS A5.28 - ER 120S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.110 0.70 1.90 <0.015 <0.015 <0.25 0.50               Ni% Mo% Al% V% Ti% Zr%   2.50 0.50 <0.010 <0.030 0.08 <0.050     Mechanical Properties (Typical) Tensile Strength 1040 MPa   Yield Strength 960 MPa   Elongation 16%   Impact Strength 60 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER110S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing NiCrMo for single pass or multipass welding of low alloy steels. Designed for welding high yield strength steels with a minimum tensile strength of 770 MPa. Excellent impact strength at low temperatures down to -40°C. Ideal for steels requiring tough weld metal for critical applications. Typically used in the metal working industry, offshore fabrication, chemical & petrochemical industries etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials T1, T1A, T1B, HY90, N-A-XTRA 56-63-65-70, X65, X70, X80, S460, S500, S550, S620, S690, WELDOX 700 etc.** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn3Ni1CrMo AWS A5.28 - ER 110S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.080 0.60 1.60 <0.015 <0.015 <0.25 0.30               Ni% Mo% Al% V% Ti% Zr%   1.50 0.30 <0.030 0.10 <0.050 <0.050     Mechanical Properties (Typical) Tensile Strength 800 MPa   Yield Strength 750 MPa   Elongation 19%   Impact Strength 70 J   Test Temperature -40ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar ER100S-G High Strength Mild Steel TIG Filler Wire 5KG

Features and Applications NiCrMo fine-grained steels for low temperature high strength applications. Extreme crack resistant alloy with high mechanical properties and excellent welding characteristics. High impact strength at sub-zero temperatures down to -50°C. Typically used in the industrial sectors of means of transport and ground movement, building industry, bridges, tanks, railway transport, mining industry, shipbuilding etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials T1, T1A, T1B, StE 460, StE590, X60, X65, X70, X80, S460, S500, S550, S620, Weldox 500** Illustrative, not exhaustive list   Standards EN ISO 16834-A - Mn3NiCrMo AWS A5.28 - ER 100S-G   Chemical Composition % (Typical) C% Si% Mn% P% S% Cu% Cr% 0.08 0.75 1.40 <0.015 <0.015 <0.25 0.55               Ni% Mo% Al% V% Ti% Zr%   0.60 0.25 <0.020 <0.020 <0.050 <0.050     Mechanical Properties (Typical) Tensile Strength 730 MPa   Yield Strength 640 MPa   Elongation 20%   Impact Strength 50 J   Test Temperature -50ºC   Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.   Shielding Gases EN ISO 14175 - TIG: I1 (Argon)   Welding Positions EN ISO 6947 - PA, PB, PC, PD, PE, PF

Weld Star Weldstar A18 ER70S-6 Mild Steel TIG Filler Wire 5KG

Features and Applications A copper coated wire containing high levels of manganese and silicon for stronger deoxidizing power where stringent cleaning procedures are not possible. The high silicon content increases the fluidity of the weld pool, creating a smoother bead appearance and resulting in minimal post-weld grinding. Good mechanical properties at sub-zero temperatures down to -40°C. Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc. Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality. Test Certificates can be found online @wilkinsonstar247.com    Typical Base Materials S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML** Illustrative, not exhaustive list   Standards EN ISO 636-A - W 42 4 3Si1 AWS A5.18 - ER 70S-6  

BÖHLER Bohler Mild Steel TIG Filler Rod EMK 6 - 5KG

Bohler EMK 6 Mild Steel TIG Filler Rod - 5KG ER70S-6 Mild Steel Filler Rod GTAW rod with high silicon content. The welding rod is suited for joints in boiler and vessel fabrication as well as in structural steel engineering. Böhler EMK 6 can be used in sour gas applications (HIC-Test acc. to NACE TM-02-84). Test values for SSC-test are available too. Spec: AWS A5.18 ER70S-6 Rod Diameter: 1.6mm, 2.0mm, 2.4mm, 3.2mm Approvals: TÜV (09717.), LTSS, SEPROZ, CE